Related
Hello,
I have a brand new TF101, but the version is not US nor WW nor anything that I could find on the Asus web site. It's an HMJ37.TB_epad rom. Probably related to the fact that I'm in Belgium, we never do things like other people
Now I want to root it, but there is no "stock" TB firmware that I could find to nvflash back if something goes wrong and/or I need to send it for repair. I did find a thread where a method to backup my own device with nvflash is described. But apparently noone tried to reflash a complete backup to see if it works, and it is also clearly said that some partitions are encrypted, so not reflashable as is. So it seems that I basically have no way back if I root. Am I misinterpreting something ? Is there some other source for stock roms with a TB variant ?
Also, I'd like to try Prime, but I read that it's for US or WW models only, so I don't know if it would work... remember that I currently have no way back if things go wrong, so I'd like to be sure
I would be very gratefull if anyone could help...
Thanks,
--
Rémi
You'll need a stock TB SKU ROM to unroot and send it back for any service. As for using Prime WW/US, both will work just fine. The hardware is all the same.
find stock TB firmware
thanks for your answer, at least I know I can try Prime
Any idea where I could find a stock TB firmware ?
Did you try asus website?
yes, even the Belgian website has all the localised roms (I guess they all come from the same source), but not TB.
I'll ask my distributor, but as they are just that (distributors) I guess they won't be able to help...
asus answers :-(
Hi,
just for the record in case someone has the same problem:
I contacted Asus support, which told me "the TB version is not yet availlable, please be patient until it is on our web site".
With a bit more poking (ETA? will it really happen?), they added "no ETA, we will tell you when we know".
So no ETA, even informal, and no confirmation that it is indeed planned or even in the making...
A bit disappointed after reading so many (justified) praises for a device which will always recover from whatever one flashes to it. For some unknown reason, we Belgian must stay out of it :-(
I'm in a similar situation; i have the Japanese version which comes with a Japanese keyboard. so using a different region will mess up the keyboard configuration. there is also a secondary program called fskaren which is like a helper for entering kanji characters (instead of a native IME like most other languages)
Like the Belgium model, there is no JP rom out yet (we're still on 3.0.1; but im not sure if Gingerbreak is patched on this version) So when I flashed prime on my transformer (1.5 with nvflash), it not only "broke" the kb (changed it to US format, so i couldnt enter japanese, the kana and font size buttons didnt work as well as some remaped keys like the @ key would show a "[") but it also ended up messing up the recovery partition.
CWM worked fine but when I tried to NVFlash it to a stock WW there was a problem: it deleted CWM fine but it couldnt fully flash the recovery partition (if i did the vol - then vol+ at boot it would give me the android with a ! symbol, I could only do a hard reset if i had the ww firmware loaded on an Sd card. i tried a bunch of combinations for stock ww for 3.0.1 and 3.1 and there was never a time where i could do a hard reset without having the renamed eee_update file on SD.
So a word of warning to people with different version hardware; be careful what you flash, especially if your hardware is noticably different from the "common" versions.
Luckily I was able to get an exchange (from the store) and now i:m waiting for the files to be released or an update so that I can root (i'm assuming that the "pure root" method will work (and I can forgo the CMW part and keep my original recovery partition since ill need FSkaren for japanese)
However, without CMW, i cant make system backups, are there any simple ways to build an NVFlash backup?
There was a link on Modaco for a gui version of nvflash but it didnt work for me (it showed no errors, the progress bar just goes to 100 but no files were created).
I read the thread with the script for doing a backup, would someone like to explain how that one works? (Im assuming through adb but there are some details about restoration that I cant understand)
Id really like to be able to make a recovery for the JP version as I have found that there are quite a few people here who had flashed prime and found that the keyboard functionality had been borked (id like to be able to help them and im sure that it would be useful for building a repository for all the international versions out there.
does anyone want to write a tutorial?
Sent from my Transformer TF101 using Tapatalk
hi, thanks for your answer.
Our situations are a bit different because the TB 3.1 rom does exist, my transformer is running it. My problem is just that I cant find it as a standalone flashable download, and I cant find a reliable way to backup my current rom as a whole.
Now Belgium has indeed its own keyboard layout, that must be the reason for the custom rom, and apparently I would loose it by flashing prime or any custom rom... crap... keyboard layout should just be a config file :-(
Anyway, I wont touch that beast until I have a reliable way to come back, and will keep this thread informed of my findings if any.
Thanks,
--
Rèmi
The Keyboard layout is partially a configuration file for the JP version. A few Japanese people have remapped the keyboard so it matches when running Prime, but since there is no Japanese IME (except voice) our versions need a soft keyboard which runs together with the dock (when you want to type in Japanese). So even with the keyboard settings files in the right place, we would still need the software to add work it.
As for backing up, take a look at this:
http://forum.xda-developers.com/showthread.php?t=1129308
I haven't had time to try it (I need to learn how to use it properly first, someone mentioned a possibility of bricking on restore) but it looks like it can be a solution.
kisaten said:
As for backing up, take a look at this:
http://forum.xda-developers.com/showthread.php?t=1129308
I haven't had time to try it (I need to learn how to use it properly first, someone mentioned a possibility of bricking on restore) but it looks like it can be a solution.
Click to expand...
Click to collapse
yep that's the thread that I saw to make my own backup. The problem is that noone tried the restore part
Furthermore, they clearly say that some partitions are encrypted and should not be restored, but apparently they don't know which ones for sure... so although promising, not an option right now.
on the same HMJ37.TB boat
hello rhaaa,
I'm just posting to tell you we are on the same belgian boat
So I thank you for having created the topic, I hope you (and other belgian buyers) can keep us updated about this flash issue. Of course, I'll do the same if I have some fresh info.
By the way, did you do the recent OTA? I'm still on the 8.4.4.5.2-20110603 build.
regards from Brussels,
oliwek
i rooted yesterday BEFORE i read this thread. Have done only root + installed CWM
was going to install a custom rom but might hold off a bit more... Although the fact that i am now rooted will probably stop me from getting new OTA updates?
if I feel lucky, i might install a new rom anyway and hope an original one has surfaced by the time I will actually need it
BUT: does flashing to eg prime rom will make it so that my azerty dock will be in qwerty mode?
Belgium always does things differently in regard to Android, rumor is it's legally regulated somehow.
I will abstain from rooting until the original TB SKU comes out. Keep us posted, if anyone comes across a TB SKU! Cheers!
belblade said:
Does flashing to eg prime rom will make it so that my azerty dock will be in qwerty mode?
Click to expand...
Click to collapse
I also would like to know if using a WW firmware, or a custom ROM, creates regional issues with a belgian AZERTY keyboard/dock.... any experience to share?
belblade said:
i rooted yesterday BEFORE i read this thread. Have done only root + installed CWM
was going to install a custom rom but might hold off a bit more... Although the fact that i am now rooted will probably stop me from getting new OTA updates?
if I feel lucky, i might install a new rom anyway and hope an original one has surfaced by the time I will actually need it
BUT: does flashing to eg prime rom will make it so that my azerty dock will be in qwerty mode?
Click to expand...
Click to collapse
Could you give me details about the process you did follow? Did you root the last OTA firmware? what is the build?
thank you
edit : sorry for the double post
kovla said:
Belgium always does things differently in regard to Android, rumor is it's legally regulated somehow.
I will abstain from rooting until the original TB SKU comes out. Keep us posted, if anyone comes across a TB SKU! Cheers!
Click to expand...
Click to collapse
for people reading dutch, I suppose this is related : http://www.sigridschrijft.be/index.php/geen-youtube-app-in-belgie-door-rechtzaak-sabam/
(no youtube app on different android devices for the belgian market)
i used the topic : [ROM] Transformer 3.1 pure root and worked like a charm
don't remember the exact version but is the one before .11...
still debating on which rom i will try first might wait for prime 1.6 ...
thanks for the details
now that we have some belgians united: has anyone of you been able to install youtube ? i just can't figurer it out.. Not available in the market. Have gotten an apk from somewhere but that didn't install and have tried market access with different codes and that didn't work either...
any help is appreciated !
try with this file attached (works on 3.1 but not on 3.0, or so I have heard)
edit : sorry, you already probably did try with this file, but are you on android 3.1? what is the error message if this doesn't work?
you could try to use alogcat before retrying to install, to get a detailed log
edit : by the way, I wonder if you change your localisation in Android for Netherland or France, or if you use a public proxy to get an IP located abroad, you wouldn't then find youtube for tablet on the market.... You could find several google apps you couldn't find in Europe if you used an american IP through public proxy, so this could work...
see for example this : http://forum.xda-developers.com/showthread.php?t=1072655&page=9
Belgian will get youtube on their tablet when using it from their vacation spot in Torre Molinos
it worked with the apk you provided ! Thanks a million
I had a similar apk from tweakers.net that didn't work ...
you're a life-saver !
Hi, not sure where to go with this, have tried having a look around but not found anything. I un-rooted using this guide here :
http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
Everything seemed to go okay, but when updating it says there are no updates. At the moment I am stuck on v 3.0.1 it seems.
Anyone got any ideas please?
Edit - forgot to mention I am a UK user, so I used the WW file on the site.
Do you still have a custom recovery? That will prevent OTAs from coming, make sure EVERYTHING is stock, no su or recovery or anything weird. If not try manually placing the ASUS update.zip
or NvFlashing/rooting putting recovery on and reinstalling latest total stock ICS.
Thanks for your reply - forgive me, I literally rooted when I had the device and haven't got a clue how to check if or what custom recovery is. Is Super User just an icon in the apps folder and if that's gone then I no longer have it installed?
Well, I don't have anything on the SD card anymore - I wiped all the data that was on that I managed to get into that menu thing (holding down power button + vol down, then vol up) but it's just the android robot with a warning triangle. I assume this is because there is nothing on the SD card?
That means you have stock recovery and no CWM.
So I need to look into this NvFlash thing then? It's a B50 device.
Yes that'd probably be your best bet if you have a B50
Thing O Doom said:
Yes that'd probably be your best bet if you have a B50
Click to expand...
Click to collapse
Okay, I've done a lot of reading up here : ahttp://forum.xda-developers.com/showthread.php?t=1494230&highlight=nvflash+for+b50
and it seems NVFlash is a tool for unbricking my device? I'm not sure that's what I need, will this allow me updates or something? Sorry finding it a bit confusing...
http://forum.xda-developers.com/showthread.php?t=1683311
What it does is restore your TF to complete stock, here's the link for latest ICS firmware with total stock using NvFlash, you'll be able to take OTA updates too. All files needed are included, say thanks to Korumera!
Edit - will post back
knightlore101 said:
Edit - will post back
Click to expand...
Click to collapse
Okay that was easy enough but still won't let me update anything (unless I'm on the lastest updates?) I seem to have a lot of Chinese apps on here now and am unable to add a google account on the tablet, will only let me add an Asus Sync account (which I've never used). Notifications seem to be in Chinese also but I have set languages etc to English (UK).
that's... really weird. You might just want to try flashing a US blob. idk why it wont let you update either.
I was being a total noob, I used the wrong firmware. I'm now on ICS, still not doing updates for some reason though but - thanks for all your help.
That's because that's the current latest firmware It should pop up when there's an update.
Hi, Is there any one suceeded to downgrade from leak Jb 4.1 to ICS 4.0.4??
If yes could some one make video or provide step by step procedure.
There is no thread related to downgrade from leak jb 4.1 to ICS 4.0.4
even though many claimed they suceeded to downgrade.
Thanks
amritn said:
Hi, Is there any one suceeded to downgrade from leak Jb 4.1 to ICS 4.0.4??
If yes could some one make video or provide step by step procedure.
There is no thread related to downgrade from leak jb 4.1 to ICS 4.0.4
even though many claimed they suceeded to downgrade.
Thanks
Click to expand...
Click to collapse
I have. You will have to download the correct file from here . (if your phone is Asia retail like mine , download the 2nd one in the list)
Flashing is the same way you did the JB leak. It's via RSD, put the phone in fastboot and flash via RSD.
--------------------------------------
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
Lifehacker7 said:
I have. You will have to download the correct file from here . (if your phone is Asia retail like mine , download the 2nd one in the list)
Flashing is the same way you did the JB leak. It's via RSD, put the phone in fastboot and flash via RSD.
--------------------------------------
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
Click to expand...
Click to collapse
My second and last question is( bear with me it's some how long)
1 I was previously in gingerbread 2.3.6,( the phone was asia retail), I flashed directly from gingerbread to jb leak 4.1.
Everything seemed ok and it passed RSD and the phone booted but stuck in motrolla splash screen ( kinda soft brick),
There was error in my lappy running window 7 64bit , mtp usb drive failed to instal(In device manager when i tried to update mtp usb driver it said
newer version of driver already installed),
Now a second scenerio starts Being in softbrick I tried to downgrade from jb to ICS, every firmware except those written with fastboot p3( I guess only chinese version) can be flashed through RSD , otherwise if fimware like 6.7.2 ------mearet or 6.7.2 ------ searet when flashed failed with error in step 4 in rsd like it shows rebooting in bootloader and shows failed error. So my point is only chines firmware with fastboot p3 can be flashed easily. Now I flashed both chinese and hongkong ICS firmware with title fastboot p3-------, and they both flashed correctly and passed but same things happened as jb leak, stuck in M logo and mtp usb driver failed error in my lappy.
Now my last option to fully boot was to go to gingerbread , so I downloaded couple of stock rom like 5.5.1 edem-27searet, it didnot flashed and got error with rebooting bootloader in step 4 or 5. At last I tried fastboot-p3_edison-edison-user-4.0.4-6.7.2_GC-180-EDS-20-31-release-keys-ChinaRetail-CN_chn.tar and it booted properly.
Now again I tried two times to go to ICS or jb leak and samething happened, stuck in M logo. But gb firmware always booted properly.
Please read above scenario before replying, because I haven't seen such situation in the whole xda thread for atrix 2 and by googling, Everyone flashed the rom and they said booted properly
My questions are
1 I want to flash jb leak rom or otherwise ICS, what will be my step?? I'm desperate to try these roms. Please keep in mind about my above situation as i'm unable to flash like other people do.
2 Why the above situation happening like softbrick while upgrading and why other firmware file are not flashing except titled with fastboot? Is it related to kernel or bootloader. When I was in xperia S when I updated from gb to ics same scenario occured but i tackeled situation by flashing in kernel. When I was in AT&T Infuse 4g, I tacked the above situation by upgrading from froyo to gb by updating from froyo bootloader to gb one.
But situation about atrix 2 just blow my head, I'm trying from 4 days, read every thread of xda related to atrix 2 , atrix 4g, googled for solution, watched video from youtube, tried every firmware but none solved my problem .
So waiting for solution from my senior XDA's
Thanks
1. we have a locked bootloader. ( no custom kernels/edits )
2. You aren't supposed to flash any other firmware files other than the correct one according to your phone region.
3.all the files from the thread i linked to are fastboot files ( correct me if i'm wrong) and are to be flashed via RSD while in fastboot mode ( turn off the phone, press power and volume down simultaneously to get there).
And by mistake of you flashed att firmware, then your phone will be completely screwed up. ( there are hardware and bootloader differences bw att and international versions )
Since you can successfully boot to gb, which firmware version does it state ?
Have you tried taking an OTA ICS? ( idk how well it might go).
I hope Jim comes across this thread
--------------------------------------
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
Lifehacker7 said:
1. we have a locked bootloader. ( no custom kernels/edits )
2. You aren't supposed to flash any other firmware files other than the correct one according to your phone region.
3.all the files from the thread i linked to are fastboot files ( correct me if i'm wrong) and are to be flashed via RSD while in fastboot mode ( turn off the phone, press power and volume down simultaneously to get there).
And by mistake of you flashed att firmware, then your phone will be completely screwed up. ( there are hardware and bootloader differences bw att and international versions )
Since you can successfully boot to gb, which firmware version does it state ?
Have you tried taking an OTA ICS? ( idk how well it might go).
I hope Jim comes across this thread
--------------------------------------
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
Click to expand...
Click to collapse
Thanks for ur fastest reply
1 True i know our bootloader is locked
2 If we aren't how we can flash chinese firmware on our set?
3 True
4 True At&T firmware can't be flashed on or model and vice versa
5 As per ur question gb version which i can boot is 2.3.6 and the firmware i Flashed is fastboot-p3_edison_edison-user-2.3.6-5.5.1-1_GC-109-52-release-keys-ChinaRetail-CN_chn.tar.gz
6 Can I take OTA ICS even though my set was not previously in Chinese firmware out of box. By luck or unluck I'm now settled in chinese firmware
7 Now last question is can i go directly to Angeeks jb 4.1 firmware posted in the thread.
Once again thanks :good:
2 I
Lifehacker7 said:
1. we have a locked bootloader. ( no custom kernels/edits )
2. You aren't supposed to flash any other firmware files other than the correct one according to your phone region.
3.all the files from the thread i linked to are fastboot files ( correct me if i'm wrong) and are to be flashed via RSD while in fastboot mode ( turn off the phone, press power and volume down simultaneously to get there).
And by mistake of you flashed att firmware, then your phone will be completely screwed up. ( there are hardware and bootloader differences bw att and international versions )
Since you can successfully boot to gb, which firmware version does it state ?
Have you tried taking an OTA ICS? ( idk how well it might go).
I hope Jim comes across this thread
--------------------------------------
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
Click to expand...
Click to collapse
A small correction.. If you have a retail phone, you can flash any region firmware as long as it is for this phone. Just don't flash att ones. The radio is different and your phones cdt security number will be increased if you do.
Regarding flashing jb leak, how long did you wait after flashing? First boot usually takes long..
Sent from my MB865 using Tapatalk 2
Ravikirancg said:
A small correction.. If you have a retail phone, you can flash any region firmware as long as it is for this phone. Just don't flash att ones. The radio is different and your phones cdt security number will be increased if you do.
Regarding flashing jb leak, how long did you wait after flashing? First boot usually takes long..
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
About 30 minutes after flashing
More update I Flashed ics hk firmware, and this time it showed android is upgrading 1of 30, then passed 30/30 and then freezed for 25 minutes.
So after waiting for 20 minutes and stuck in android is upgrading I took out the battery and entered into recovery and did factory reset and wipe cached.
Now this time no android is upgrading message came up and stuck in M logo
To try any of the ROMs available ( except the gb ones, official jb leak, and one or 2 ROMs based on that) you should be on an ICS base ( they are built based on the ics kernel).
And to try the angeeks jb ROM, you should be on the JB leak 1st.
ROMs like PA, CM10, 10.1, they all need ics as base.
If nothing is really working out, you should probably give the phone to service station.( tell some lie about how that happened )
--------------------------------------
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
Ok, so... there is a major issue going on here.
You flashed the HK/TW firmware on an international MEARET or SEARET phone, the HK or TW firmware is very much like the AT&T versions and that they lock the bootloader version so that upgrading or downgrading and changing firmware regions are blocked for the most part. There is a file in all the firmware version that tells RSD and the phone if it can or can not flash things... the one everyone knows is the CDT.bin, and the one that not everyone knows about is the CID, and the CID can get you into BIG trouble if you do not know what it is, or why it is there, so DO NOT mess with it, unless you know what you are doing... The CDT.bin on the other hand is part of EVERY FXZ, it will tell RSD if you can flash something for the most part or not.
Your ONLY chance is to flash your PROPER version of ICS firmware through fastboot commands. I will not give directions again, they are posted in several threads in here, do a search in the general section for the commands.... you MUST flash all the same files that RSD lite would to make this work, and you can no skip any of them. I would look for the order and the files to flash in the .xml file that comes with the firmware so that you know the order and partition names and such.
You MUST have the following and at the latest versions, even if you have the drivers installed, uninstall them and reinstall them again.
1) A2 moto drivers
2) Android SDK
3) moto-fastboot command/utility for your operating system
4) The PROPER ICS FXZ file for your phone and region
5) understanding of the comand line and the commands that are needed to flash with the moto-fastboot utility
After you have done all of that flashing, you should be on the proper ICS for your region. If you want to try and do the JB leak again, then it MIGHT, work, but I am not sure if it will or not.
It is a real bad idea to flash other regions firmwares to your phone, unless they are leaks, and have been tested to work on your regions handset, just for future reference.
jimbridgman said:
Ok, so... there is a major issue going on here.
You flashed the HK/TW firmware on an international MEARET or SEARET phone, the HK or TW firmware is very much like the AT&T versions and that they lock the bootloader version so that upgrading or downgrading and changing firmware regions are blocked for the most part. There is a file in all the firmware version that tells RSD and the phone if it can or can not flash things... the one everyone knows is the CDT.bin, and the one that not everyone knows about is the CID, and the CID can get you into BIG trouble if you do not know what it is, or why it is there, so DO NOT mess with it, unless you know what you are doing... The CDT.bin on the other hand is part of EVERY FXZ, it will tell RSD if you can flash something for the most part or not.
Your ONLY chance is to flash your PROPER version of ICS firmware through fastboot commands. I will not give directions again, they are posted in several threads in here, do a search in the general section for the commands.... you MUST flash all the same files that RSD lite would to make this work, and you can no skip any of them. I would look for the order and the files to flash in the .xml file that comes with the firmware so that you know the order and partition names and such.
You MUST have the following and at the latest versions, even if you have the drivers installed, uninstall them and reinstall them again.
1) A2 moto drivers
2) Android SDK
3) moto-fastboot command/utility for your operating system
4) The PROPER ICS FXZ file for your phone and region
5) understanding of the comand line and the commands that are needed to flash with the moto-fastboot utility
After you have done all of that flashing, you should be on the proper ICS for your region. If you want to try and do the JB leak again, then it MIGHT, work, but I am not sure if it will or not.
It is a real bad idea to flash other regions firmwares to your phone, unless they are leaks, and have been tested to work on your regions handset, just for future reference.
Click to expand...
Click to collapse
Thanks jim for the gr8 info,
Would you recommend me for OTA update to Ics from here? It's saying update available
Do my mobile boot in this scenario?
Any consequences taking OTA.
Thanks again for help
amritn said:
Thanks jim for the gr8 info,
Would you recommend me for OTA update to Ics from here? It's saying update available
Do my mobile boot in this scenario?
Any consequences taking OTA.
Thanks again for help
Click to expand...
Click to collapse
I would not take any OTA, since we have FXZ files that are properly made for the regions our phones are made for, if you know what I mean. The only difference is that an FXZ will wipe your phone clean and you have to resync with google for calandar and e-mail and contacts and apps and such.
With out knowing the EXACT firmware you are on right now, I can not really tell you how safe an OTA or an FXZ will be for you. I am only guessing at this point, that you are still on the HK/TW firmware, and why I suggested you flash the MEARET/SEARET firmware by hand with the moto-fastboot commands, to get you where you should be again, before you try the JB leak, or whatever you are after.
Need to make decision!
Hi guys!
For first, sorry for my bad english. I hope you can understand me. Greeting from Belarus!
I have ME865 with United Arab Emirates warranty.
I flashed my Atrix 2 from 2.3.6 to 4.0.4 6.7.2_EDEM-18-MEARET. It worked fine.
Then I flashed official 4.1.2 leak, rooted it.
Which region firmware I need choose to success downgrade from 4.1.2 to 4.0.4?
Really need your answer! Thanks!
I have some bugs on JB:
1. Can't send and recieve mms.
2. APN dissapear after every reboot. Fix - after reboot turn on/off airplane mode.
3. Bad GPS. Fix - install GpsFix app.
4. Recieve USSD message with sound.
_________________________________________
Just had flash 4.0.4 mearet. All works.
jimbridgman said:
I would not take any OTA, since we have FXZ files that are properly made for the regions our phones are made for, if you know what I mean. The only difference is that an FXZ will wipe your phone clean and you have to resync with google for calandar and e-mail and contacts and apps and such.
With out knowing the EXACT firmware you are on right now, I can not really tell you how safe an OTA or an FXZ will be for you. I am only guessing at this point, that you are still on the HK/TW firmware, and why I suggested you flash the MEARET/SEARET firmware by hand with the moto-fastboot commands, to get you where you should be again, before you try the JB leak, or whatever you are after.
Click to expand...
Click to collapse
As per your question jim I'm currently in android version 2.3.6
system version 55.91.109.ME865.ChinaRetail.en.CN
Model number ME865
build number 5.5.1-1_GC-109
Kernel version 2.6.35.7-g8b6f7f9
[email protected]#1
And I flashed this firmware to get fully boot fastboot-p3_edison_edison-user-2.3.6-5.5.1-1_GC-109-52-release-keys-ChinaRetail-CN_chn.tar.gz
-Also tried different firmware like jb 4.1 leak flashed passed booted but stuck in M logo splash screen.
-Flashed both ICS build from china and hk/tw and stuck in M logo as in jb
-Tried searet and Mearet firmware for both ICS and Gb build but failed after 5/21 rebooting to bootloader and failed
-And at last I tried fastboot-p3_edison_edison-user-2.3.6-5.5.1-1_GC-109-52-release-keys-ChinaRetail-CN_chn.tar passed and booted.
Jim What will be my next move??
Can I try fast boot method as u mentioned or OTA update to ICS
Thanks
amritn said:
As per your question jim I'm currently in android version 2.3.6
system version 55.91.109.ME865.ChinaRetail.en.CN
Model number ME865
build number 5.5.1-1_GC-109
Kernel version 2.6.35.7-g8b6f7f9
[email protected]#1
And I flashed this firmware to get fully boot fastboot-p3_edison_edison-user-2.3.6-5.5.1-1_GC-109-52-release-keys-ChinaRetail-CN_chn.tar.gz
-Also tried different firmware like jb 4.1 leak flashed passed booted but stuck in M logo splash screen.
-Flashed both ICS build from china and hk/tw and stuck in M logo as in jb
-Tried searet and Mearet firmware for both ICS and Gb build but failed after 5/21 rebooting to bootloader and failed
-And at last I tried fastboot-p3_edison_edison-user-2.3.6-5.5.1-1_GC-109-52-release-keys-ChinaRetail-CN_chn.tar passed and booted.
Jim What will be my next move??
Can I try fast boot method as u mentioned or OTA update to ICS
Thanks
Click to expand...
Click to collapse
But you are supposed to be on SEARET/MEARET as your "real" "home" firmware, correct?
If you are supposed to be on SEARET/MEARET, then I would go here, and grab the ICS FXZ file for the SEARET/MEARET firmware, and use the fastboot commands to try and flash it. As always there is no guarantee, and there is always a chance of brick so be careful.
The reason I am really pushing for using the fastboot commands, as I mentioned earlier, that since you are "manually" flashing the parttitions one at a time, from the command line, there will be no checks to see if the proper CDT.bin is on the phone before it does it, and this will save you, in that you should be able to put your "correct" firmware on the phone, I hope.
I have one last question, are you 100% sure that you actually purchased an international MEARET/SEARET phone, and not an HK/TW version of the phone? This is just a thought, since you did say that you were unable to flash any firmware besides the ME865 china HK/TW version... which does bring up that concern.
jimbridgman said:
But you are supposed to be on SEARET/MEARET as your "real" "home" firmware, correct?
If you are supposed to be on SEARET/MEARET, then I would go here, and grab the ICS FXZ file for the SEARET/MEARET firmware, and use the fastboot commands to try and flash it. As always there is no guarantee, and there is always a chance of brick so be careful.
The reason I am really pushing for using the fastboot commands, as I mentioned earlier, that since you are "manually" flashing the parttitions one at a time, from the command line, there will be no checks to see if the proper CDT.bin is on the phone before it does it, and this will save you, in that you should be able to put your "correct" firmware on the phone, I hope.
I have one last question, are you 100% sure that you actually purchased an international MEARET/SEARET phone, and not an HK/TW version of the phone? This is just a thought, since you did say that you were unable to flash any firmware besides the ME865 china HK/TW version... which does bring up that concern.
Click to expand...
Click to collapse
Jim You are genious, Now with fastboot command i'm in the stage where I was 4 days ago pure stock. The firmware which didnot flashed through RSD , flashed with fastboot commands. But with fastboot commands moto-fastboot.exe flash grfs grfs.img, showed error as failed no such partitions. But even without that i'm now booted in stock Sereat gingerbread firmware. Now I will flash ICS firmware through fastboot and will update if anything goes wrong wrong or write
Thank u:good:
Update whatever I do I get stuck in splash screen or M logo after flashing ICS fxz file or Jb file using any method either fastboot
or RSD even though i'm fully stock now 2.3.6 sereat
amritn said:
Update whatever I do I get stuck in splash screen or M logo after flashing ICS fxz file or Jb file using any method either fastboot
or RSD even though i'm fully stock now 2.3.6 sereat
Click to expand...
Click to collapse
Make sure you are getting your FXZ files from a well known good source.
This is the best one:
http://sbf.droid-developers.org/edison/list.php
Try and flash the ICS one, I think it is this one, that you want:
http://sbf.droid-developers.org/edison/6.7.2_EDEM-18-SEARET_cfc.xml.zip
Try it with RSD lite version 6+ ONLY, then if that does not work, try it with the fastboot commands again.
You should not try and flash the p3 files, until you get to ICS first. I think it all has to do with the bootloader versions, and why you can not go from GB to JB. You have to go to ICS then JB, I am pretty sure of that.
jimbridgman said:
Make sure you are getting your FXZ files from a well known good source.
This is the best one:
http://sbf.droid-developers.org/edison/list.php
Try and flash the ICS one, I think it is this one, that you want:
http://sbf.droid-developers.org/edison/6.7.2_EDEM-18-SEARET_cfc.xml.zip
Try it with RSD lite version 6+ ONLY, then if that does not work, try it with the fastboot commands again.
You should not try and flash the p3 files, until you get to ICS first. I think it all has to do with the bootloader versions, and why you can not go from GB to JB. You have to go to ICS then JB, I am pretty sure of that.
Click to expand...
Click to collapse
Jim no matter what I do i cannot upgrade my firmwawre either to ICS or jellybean, Always stuck Im motrolla splash screen at the last stage of boot. But if i return to gingerbread on both chinese and asian retail(using fastboot or RSD) it's working.I've tried everything. It's out of my mind now.
There is something that is causing my mobile not to boot. If u do have any idea, please help me.
Apart from that I want to know do we have ICS stock kernel in zip format which we can flash?
If other ppl had same problem and solved it pls share with me. This seems something new, softbrick in ICS everytime no matter which region firmware i flash apart from AT&T firmware. I'm trying since 5 days.
Pls reply xda senior member or anyone those in similar case.
amritn said:
Jim no matter what I do i cannot upgrade my firmwawre either to ICS or jellybean, Always stuck Im motrolla splash screen at the last stage of boot. But if i return to gingerbread on both chinese and asian retail(using fastboot or RSD) it's working.I've tried everything. It's out of my mind now.
There is something that is causing my mobile not to boot. If u do have any idea, please help me.
Apart from that I want to know do we have ICS stock kernel in zip format which we can flash?
If other ppl had same problem and solved it pls share with me. This seems something new, softbrick in ICS everytime no matter which region firmware i flash apart from AT&T firmware. I'm trying since 5 days.
Click to expand...
Click to collapse
get it done from moto service center
Sent from my ME865 using xda premium
Hello all. I've had the Asus TF700T since it came out and used Asus' unlocking tool to unlock. I'm now going to sell the device and want to put the stock ROM back on. I have TWRP installed. Can I simply flash the latest Asus firmware? Will it install the standard kernel? I know it won't re-lock the device.....that's permanent. I simply want to go back to stock to sell it.
FYI: I've done a forum search but can't find any one addressing this specific question; only whether you can lock, unroot, etc.
Thanks!
So you are giving up on getting your TF700 straightened out already?
Although I hate to see a perfectly good Transformer getting shackled by the stock rom, the answer is : Yes.
Just download the latest firmware, unzip it once and flash the resulting zip in TWRP.
Since you want to sell it, it may be a good idea to format data in TWRP before you are limited to the tools provided on stock.
berndblb said:
So you are giving up on getting your TF700 straightened out already?
Although I hate to see a perfectly good Transformer getting shackled by the stock rom, the answer is : Yes.
Just download the latest firmware, unzip it once and flash the resulting zip in TWRP.
Since you want to sell it, it may be a good idea to format data in TWRP before you are limited to the tools provided on stock.
Click to expand...
Click to collapse
Good idea. Thanks!
Hey guys,
I am back to using the TF700T after about a year's absence from it. I've done a bunch of tweaks on it some time ago and can't really remember all the things that have been done. I know that the device is rooted and unlocked but couldn't tell you the ROM or anything else ... not that it matters.
I want to get this thing back up and running as fast as possible so I am looking for some suggestions on a lightweight ROM that has speed as its focus. I don't care if I lose everything on it and would like to go back to as factory of a feel as possible ... I'm even open to the OTA ROM if people believe it's the best.
Can someone provide some suggestions on where to start?
llcooljayce said:
Hey guys,
I am back to using the TF700T after about a year's absence from it. I've done a bunch of tweaks on it some time ago and can't really remember all the things that have been done. I know that the device is rooted and unlocked but couldn't tell you the ROM or anything else ... not that it matters.
I want to get this thing back up and running as fast as possible so I am looking for some suggestions on a lightweight ROM that has speed as its focus. I don't care if I lose everything on it and would like to go back to as factory of a feel as possible ... I'm even open to the OTA ROM if people believe it's the best.
Can someone provide some suggestions on where to start?
Click to expand...
Click to collapse
This is maybe what you are looking for.... It is light version of Cromi X and very fast in my opinion...:good:
http://forum.xda-developers.com/showthread.php?t=2520828
Please let us know your opinion...Thanks...
Most popular, for a very good reason, is CROMi-X. Based on the stock rom, cleaned and optimized to the nines. It's how the stock rom should have been
http://forum.xda-developers.com/showthread.php?t=2425383
Lightweight?
Go for miniCROMi-X - stripped down to the essentials, very fast but you may miss some bells and whistles but definitely worth a try.
http://forum.xda-developers.com/showthread.php?t=2520828
Want Kitkat on the TF700? CyanogenMod 11 will get you there. Still some bugs though.
Then there's OMNI ROM, Paranoid, CMB.... they all have a thread in the Development section. Check them out.
Make sure you update your bootloader and recovery to the required version. If you didn't update in a year, both are definitely outdated!
Thank you for the suggestions but could you point me in the right direction to update my bootloader and recovery? It's been a while and I don't want to hard brick my Transformer.
I have since updated my computer so I'm sure my drivers for the Transformer aren't up to date ...
Sorry to ask but could you walk me through the process as if I'm new to it again?
Very much appreciated.
Model Number
ASUS Transformer Pad TF700T
Android Version
4.1.1
Kernel Version 3.1.10
[email protected] $51
Build Number
CleanROM 3.1 inheritance
Click to expand...
Click to collapse
What I am most afraid of is that I don't know what version of the Transformer it is ... US, World Wide ... the build number seems to have deleted all reference when I had flashed to ClearROM. Any way to figure this out with another method?
llcooljayce said:
Thank you for the suggestions but could you point me in the right direction to update my bootloader and recovery? It's been a while and I don't want to hard brick my Transformer.
I have since updated my computer so I'm sure my drivers for the Transformer aren't up to date ...
Sorry to ask but could you walk me through the process as if I'm new to it again?
Very much appreciated.
What I am most afraid of is that I don't know what version of the Transformer it is ... US, World Wide ... the build number seems to have deleted all reference when I had flashed to ClearROM. Any way to figure this out with another method?
Click to expand...
Click to collapse
Well if you are in the US, most likely it is US... And it doesn't matter that much on a custom ROM anyway.
Read the OP in the CROMI-X thread and follow the instructions for scenario 2. Download the bootloader /TWRP package provided there, flash it, reboot, do a factory wipe in TWRP and you're good to flash the rom.
berndblb said:
Well if you are in the US, most likely it is US... And it doesn't matter that much on a custom ROM anyway.
Read the OP in the CROMI-X thread and follow the instructions for scenario 2. Download the bootloader /TWRP package provided there, flash it, reboot, do a factory wipe in TWRP and you're good to flash the rom.
Click to expand...
Click to collapse
Problem is that I am in Canada and Canadians get either the WW or US version. From what I am reading, if I choose the wrong bootloader, I will brick my device. Any other way to determine the SKU version?
llcooljayce said:
Problem is that I am in Canada and Canadians get either the WW or US version. From what I am reading, if I choose the wrong bootloader, I will brick my device. Any other way to determine the SKU version?
Click to expand...
Click to collapse
The bootloader is universal. Only the firmware is regional. Look in About Tablet > Build Number. Even your old CROMi version should have a US or WW in it. But AFAIK Canada is North America, which is US - sorry, I know it's a sore point with you Canadians
berndblb said:
The bootloader is universal. Only the firmware is regional. Look in About Tablet > Build Number. Even your old CROMi version should have a US or WW in it. But AFAIK Canada is North America, which is US - sorry, I know it's a sore point with you Canadians
Click to expand...
Click to collapse
The Build Number indicates CleanROM 3.1 inheritance without anything else
Will I brick if I choose the wrong bootloader?
llcooljayce said:
The Build Number indicates CleanROM 3.1 inheritance without anything else
Will I brick if I choose the wrong bootloader?
Click to expand...
Click to collapse
Possibly if you flash the WRONG bootloader, but you won't if you flash the bootloader/TWRP package from the OP of the CROMi-X thread!
It contains the 10.6.1.14.10 bootloader (which is the latest for this tablet) and TWRP 2.6.1 which has been rock solid on this device.
During installation of the rom (if you go for CROMi-X) you will have the choice to install the WW or US version. The difference is mostly in the WiFi modules in the kernel I think, different channels are used in Europe and the US. But really, even if you flash the "wrong" version - you can just reflash the other one right on top of it.
If you go for a CM rom you don't even have that "problem". There are no regional versions for CM - and thousands of users are still very happy with it....
Read the CROMi-X OP carefully. Read it again - and then again until you're sure you understand the instructions.
Maybe a refresher would help. I wrote a beginners guide to flashing a rom on this tablet (most of it you won't need since you already have a custom recovery installed, but maybe it would be helpful to you to understand the process).
http://www.transformerforums.com/fo...ginners-guide-flashing-custom-rom-tf700t.html
For you only these steps are needed:
Flash the bootloader/TWRP package mentioned above
Reboot
Boot into recovery and do a Factory Wipe in TWRP
Flash the rom
Enjoy
llcooljayce said:
Problem is that I am in Canada and Canadians get either the WW or US version. From what I am reading, if I choose the wrong bootloader, I will brick my device. Any other way to determine the SKU version?
Click to expand...
Click to collapse
Boot into the bootloader menu (hold down Volume-left while turning on), it shows the bootloader version.
berndblb said:
The bootloader is universal. Only the firmware is regional.
Click to expand...
Click to collapse
The bootloader also has US and WW versions, but they are identical except for the displayed version string (at least I compared the 10.6.1.14.4 bootloaders back when they were released).
llcooljayce said:
Hey guys,
I am back to using the TF700T after about a year's absence from it. I've done a bunch of tweaks on it some time ago and can't really remember all the things that have been done. I know that the device is rooted and unlocked but couldn't tell you the ROM or anything else ... not that it matters.
I want to get this thing back up and running as fast as possible so I am looking for some suggestions on a lightweight ROM that has speed as its focus. I don't care if I lose everything on it and would like to go back to as factory of a feel as possible ... I'm even open to the OTA ROM if people believe it's the best.
Can someone provide some suggestions on where to start?
Click to expand...
Click to collapse
First post ever here at xda. My suggestion would be to start with flatline, to bricksafe your device. Then it is all about taste. Personally I prefer Cromi-X by sbdags.