Database Info

[Q] Need help with CWM install quick question

So I have followed all the steps correctly and everything has gone perfectly. Once I installed the EZ-recovery app went and chose the CWM 6.0.1 now I'm trying to select flash and its not there, cant scroll down although a can see somethings there. Uninstalled and installed older versions with the same issue. Went back to the new one. Im stuck or simply missing something, any help would be appreciated.
Mike

Bowtie4x4295 said:
So I have followed all the steps correctly and everything has gone perfectly. Once I installed the EZ-recovery app went and chose the CWM 6.0.1 now I'm trying to select flash and its not there, cant scroll down although a can see somethings there. Uninstalled and installed older versions with the same issue. Went back to the new one. Im stuck or simply missing something, any help would be appreciated.
Mike
Click to expand...
Click to collapse
If you put file to flash on external sd card and do not see it probably need to format sd card to fat32. ExtFat not supported by any recovery. Haven't used CWM since Tbolt days so not sure what you are looking at.

Its like it is supposed to be, hang on i think my font is set to large which may be why I cant see the bottom.

[HELP?] Soft-Brick?

So i decied to go to carbon rom because my phone has been acting strange, YouTube would keep resigning in everything i would launch it, Random crashed and freezes and has just been acting up for no good reason. I was running CM 10.1 nightly and dont apply ant mods to it or anything like that becuase i like it simple.
When i flashed the rom i did it with gapps but they were not intalled when i boot, all i got was my SIM pin popup like i usualy get. So i re-flashed gapps and still no luck. So i said f*** it and found another build of it and copyed it to my SD Card and was going to flash it. Like i allways do i went to factory reset and all i got was a long log of cant remove lost+found and same happed when i tryed to wipe the system. and that didnt look good so i pulled the battery and booted recovery with the key press and it would get to teamwin screen but would reboot. Opened oden on my desktop, reflashed teamwin tar and that didnt help it. So i was lucky that i loaded the rom and i rebooted to recovery and am copying all my /data/media to a sdcard that i have
So can anyone give me some links to the 16GB PIT and all that jazz so i can get thing back up and running
And no i am not a n00b becasue i have been working with android and other phones long enough to know what i am doing

powercamg4 said:
So i decied to go to carbon rom because my phone has been acting strange, YouTube would keep resigning in everything i would launch it, Random crashed and freezes and has just been acting up for no good reason. I was running CM 10.1 nightly and dont apply ant mods to it or anything like that becuase i like it simple.
When i flashed the rom i did it with gapps but they were not intalled when i boot, all i got was my SIM pin popup like i usualy get. So i re-flashed gapps and still no luck. So i said f*** it and found another build of it and copyed it to my SD Card and was going to flash it. Like i allways do i went to factory reset and all i got was a long log of cant remove lost+found and same happed when i tryed to wipe the system. and that didnt look good so i pulled the battery and booted recovery with the key press and it would get to teamwin screen but would reboot. Opened oden on my desktop, reflashed teamwin tar and that didnt help it. So i was lucky that i loaded the rom and i rebooted to recovery and am copying all my /data/media to a sdcard that i have
So can anyone give me some links to the 16GB PIT and all that jazz so i can get thing back up and running
And no i am not a n00b becasue i have been working with android and other phones long enough to know what i am doing
Click to expand...
Click to collapse
I think this is what you are looking for. Follow the guide and you will be on stock, rooted, and unlocked.
http://forum.xda-developers.com/showthread.php?t=2046439

mapatton82 said:
I think this is what you are looking for. Follow the guide and you will be on stock, rooted, and unlocked.
http://forum.xda-developers.com/showthread.php?t=2046439
Click to expand...
Click to collapse
Iv been able to load a rom but now i cant write to the phone, i have now found a guide talking about unbricking it useing odin anf a nand erase all and thats not working eather, any story i can tell verizon so i can get a replacement today?

Update!
Iv been useing http://forum.xda-developers.com/showthread.php?t=1840030 to try to get my phone back and so far it has failed but i decied to switch computers, all my computers are now running windows 8 and i ws doing this on my development computer / server and then i switched to the last computer to have windows 7 next to my main computer and what do you know it worked, the nand erase worked and now its booting im sure i will have to re-unlock the bootloader and all but im happy now

Ampe A85 A31S - 0.00kbs, format and factory reset every boot

Hey guys. Forgive my noobity but I could do with some help and might have a unique problem although I dare say someone has had this or similar.
Firstly, after putting a 64GB stick in my tablet the other day, it all went badly wrong. I had done it before with my previous 64GB that had been playing up so I sent it back and got a new one. The new one seems to be where it all went pear shaped. I might add, the 64GB is for my phone really but my phone cam was playing up so I was swapping it over and stuff... anyway the card itself seems fine in my phone.
Anyways... now my ampe tablet is suffering some strange effects that have changed. initially it would not boot up unless I redone it with the official firmware.. but then wouldn't boot up again, unless I did the same thing over and over. then one time it just refused to boot up past the initial boot screen. I gave up for weeks then picked it up again two days ago.
Now I give it the firmware installed using pheonix again and it booted up. Ahh I thought... lets play. Now I plug it into the pc but the pc says I need to format the 5GB internal partition. So I did. I then looked how to fix the fact that the tab still says it has 0.00kbs internal storage in settings. Then after a while it came up saying 5GB so i copied some files onto it.. great. But I still can't install apps as I found when trying to do this tested working fix http://www.youtube.com/watch?v=sJlpek6w624
I then read about using android commander to move busybox from xbin to bin in the system folder but mine is already there.
So now I am stuck. I can't test if my tab is rooted for the youtube link fix above although this is what I said to Nayeem on youtube:
================
Hi Nayeem. I'm really struggling with this. At first my tab was staying at the 2nd initial boot up screen after I put in a 64GB SD card. Using pheonix I managed to get it to boot by reinstalling the updated official rom from szampe but every reboot back to square one. I left it alone for weeks and came back to it, reinstalled the factory rom again and now it will boot up everytime but it has factory reset every time. I cant run the apps you supply for some reason. Everytime I have rebooted the tab, and connected back to pc it says I need to format the internal 5GB partition. I don't know if I have rooted it properly as I can't check. The commands you give above, work as it changes the location proven when I 'get' it. I'm really stumped. I'm trying out a method someone said about moving busybox from sys/xbin to sys/bin but it's already there (using android commander) so I am really stumped now. When I format the partition, it allows me to copy files to it.
================
So far I am stuck with boot up being a factory reset and the partition needs formatting and although the tablet seems a little laggy, everything I have tried works including wifi and incoming email alerts after logging into google account for playstore but no apps will install or update. the best warning I get is there is no memory to install anything and Nayeems method of moving the install location to the sd card seems to work but nothing will install still saying NOT INSTALLED when I try.
Sorry for the long winded thing but I am really new to all of this.
My hat is off to you if you read all of this and can offer a solution so i can give this tablet back to the kids.

Do you have an installed recovery
Try installing a recovery and wipe data and cache. If it does not work u have to repartition ur tablet

nelsontky said:
Try installing a recovery and wipe data and cache. If it does not work u have to repartition ur tablet
Click to expand...
Click to collapse
I am gonna look into this tonight and see what I can find out. I really don't know exactly what I am doing outside of getting pheonix up and sending a standard rom back to it as previously mentioned.
How would I repartition it ? Sounds stupid asking as i can build pcs... just want to make sure I am doing the correct method.

[Q] Softbricked VZW S3 running LS 2.7 (4.2.2)

I've been trying to upgrade to a LiquidSmooth KitKat (3.0 Nightly Beta) ROM but it's been failing. So I figured it's Sunday, it's early, let me try again. Let's get a baseline:
Last usable (as of earlier this morning) ROM: LS 2.7 (4.2.2)
TWRP 2.6.3.0
SuperSU installed
So I *WAS* unlocked and rooted.... now... I don't know what the heck is wrong.
Saturday I downloaded "EZ Unlock 1.2" and installed it; Unlock Status was "UNKNOWN" and even after clicking the UNLOCK button it still showed "UNKNOWN"
So, this morning, I made sure I had the new ROM (LS KitKat 3.0 Nightly Beta 2) on my external SD card, booted in to TWRP, and updated to the latest TWRP (2.6.3.1). I then cleaned out some old ROM backups and made a new one (using compression) which was successful. Rebooted to system, all looked & worked normally, so I rebooted to TWRP Recovery, did a Factory Reset + system (so cache, dalvik, data, & system) and that went fine. Tried to install the new ROM... FAILED. So I rebooted to Recovery and tried to restore the backup I had just made, and it seemed to succeed, but when the phone rebooted, it only got to where it reads "Samsung Galaxy S III" and got no further. I let it sit like that for 10 minutes, then pulled the battery. I booted back in to Recovery and tried restoring a backup made 2 days ago (that I have previously restored from successfully) and that gave a "successful" result, but same thing after rebooting: stuck at where it reads "Samsung Galaxy S III" and would go no further.
I am in DOWNLOAD mode currently and want to get back to the point of being able to restore my backup from 2 days ago. I'll lose text messages basically, and that's fine. I have downloaded ODIN 3.07 but it's been about a year since I last tinkered with it.
Can someone help please? I either get this phone working in the next few hours, or I have to go buy something else off craigslist... or full retail... and I'd really just prefer to get this phone working again.
If I need to "start from ground zero" and redo the boot unlock and root it, so be it. Basically, how do I unbrick my S3?

papadelogan said:
I've been trying to upgrade to a LiquidSmooth KitKat (3.0 Nightly Beta) ROM but it's been failing. So I figured it's Sunday, it's early, let me try again. Let's get a baseline:
Last usable (as of earlier this morning) ROM: LS 2.7 (4.2.2)
TWRP 2.6.3.0
SuperSU installed
So I *WAS* unlocked and rooted.... now... I don't know what the heck is wrong.
Saturday I downloaded "EZ Unlock 1.2" and installed it; Unlock Status was "UNKNOWN" and even after clicking the UNLOCK button it still showed "UNKNOWN"
So, this morning, I made sure I had the new ROM (LS KitKat 3.0 Nightly Beta 2) on my external SD card, booted in to TWRP, and updated to the latest TWRP (2.6.3.1). I then cleaned out some old ROM backups and made a new one (using compression) which was successful. Rebooted to system, all looked & worked normally, so I rebooted to TWRP Recovery, did a Factory Reset + system (so cache, dalvik, data, & system) and that went fine. Tried to install the new ROM... FAILED. So I rebooted to Recovery and tried to restore the backup I had just made, and it seemed to succeed, but when the phone rebooted, it only got to where it reads "Samsung Galaxy S III" and got no further. I let it sit like that for 10 minutes, then pulled the battery. I booted back in to Recovery and tried restoring a backup made 2 days ago (that I have previously restored from successfully) and that gave a "successful" result, but same thing after rebooting: stuck at where it reads "Samsung Galaxy S III" and would go no further.
I am in DOWNLOAD mode currently and want to get back to the point of being able to restore my backup from 2 days ago. I'll lose text messages basically, and that's fine. I have downloaded ODIN 3.07 but it's been about a year since I last tinkered with it.
Can someone help please? I either get this phone working in the next few hours, or I have to go buy something else off craigslist... or full retail... and I'd really just prefer to get this phone working again.
If I need to "start from ground zero" and redo the boot unlock and root it, so be it. Basically, how do I unbrick my S3?
Click to expand...
Click to collapse
Have you try to wipe cache/dalvik cache/system/ format sd, make sure everything is mounted the do the restore again?

buhohitr said:
Have you try to wipe cache/dalvik cache/system/ format sd, make sure everything is mounted the do the restore again?
Click to expand...
Click to collapse
I am currently backing up my external SD card (all pics & backups go to ExtSDCard) before doing any formatting. I was going to try that next, but am expecting it to fail. What I've found on XDA so far has mostly for those that took an OTA but that is not my case. I am severely pressed for time (use my phone for work as well as personal) and am planning for "worst case scenario" so, assuming your suggestion fails, do I get the original ROM, flash that back using ODIN, then re-do the boot unlock & root?

papadelogan said:
I am currently backing up my external SD card (all pics & backups go to ExtSDCard) before doing any formatting. I was going to try that next, but am expecting it to fail. What I've found on XDA so far has mostly for those that took an OTA but that is not my case. I am severely pressed for time (use my phone for work as well as personal) and am planning for "worst case scenario" so, assuming your suggestion fails, do I get the original ROM, flash that back using ODIN, then re-do the boot unlock & root?
Click to expand...
Click to collapse
That would be the right way..good luck!

buhohitr said:
That would be the right way..good luck!
Click to expand...
Click to collapse
I was hoping for a bit more than "good luck" actually since it's been a good year since my last trip with Odin... but thanks.

papadelogan said:
I was hoping for a bit more than "good luck" actually since it's been a good year since my last trip with Odin... but thanks.
Click to expand...
Click to collapse
I have high confidence that you will have this issue resolved shortly. It's not your fault, lately, some custom roms did not behave accordingly...

F***ed up badly, now downloading factory rom, need help to continue

Hi guys, I just registered @ xda because it looks like it's the only serious and feedback active community available. In 10 minutes I found most of the info I was looking for, but I still want to make sure what Im planning to do is fine before I mess up again. Here's the issue:
I was fooling around with the tablet and had just rooted it so I could get rid of some bloatware, and decided to go further and install cyanogen, just for the looks. So I got this thing cm-10.1-20130411-EXPERIMENTAL-p3110-M3 from the official site, which was I put on a folder inside the tablets storage (not on the 16gb SDcard it had in it). I downloaded Rom Manager and skipped through the "search and download rom" and went for the option of looking for it inside the SD card. I had the Backup options and the wipe cache and data ON.
So I proceeded and it booted, started to do the backup and at some final point it had an error, something like "could not backup Data!". I had the options of rebooting, some other stuff and the option of installing a rom from the SD Card. I went for it and searched for the .zip inside the storage, and installed it. It did it withouth trouble, and when it finishd it prompted me to install an update, which I didn't (don't know why).
Then, I went for the reeboot option and when it started I get the normal samsung's black screen with the device's name on it, but then I get a fast glitching image that sweeps through the screen and the cyanogen startup logo which gets stuck for ever.
Click to expand...
Click to collapse
Now Im past it, I can get to download or recovery mode, so I moved onto getting the original firmware so I can clean-install again. I got it from sammobile, chose the one belonging to Chile (that's where I got the tablet), and it's 729mb of data. The tablet is a Samsung Galaxy Tab 2 7.0 P3110
If I flash it with Odin will everything be fine? All I have to do is that thing in downloadmode when I rooted it, but with that 729mb file? Should I put it in the external SD or is it more convenient to place it in the internal storage?
I appreciate your help in advance, I know this is as basic as it gets but messing up again would cost me dearly, since I have to do other stuff.

forum.xda-developers.com/showthread.php?t=1900055 read here, all the information you will need.
It's fine to flash through odin, you will back at stock provided you don't overlook small details and do exactly like the way it is shown. Don't worry, Don't panic. Just be careful to use the files meant for your device only. Second be extra careful when you are dealing with kernel file, pit file or reparation in odin in future.
Third, get root and custom recovery,twrp.
Fourth, after your device start running take backup from twrp recovery. That will save you from most of the trouble.
Most of the details and instructions are already here

billysam said:
forum.xda-developers.com/showthread.php?t=1900055 read here, all the information you will need.
It's fine to flash through odin, you will back at stock provided you don't overlook small details and do exactly like the way it is shown. Don't worry, Don't panic. Just be careful to use the files meant for your device only. Second be extra careful when you are dealing with kernel file, pit file or reparation in odin in future.
Third, get root and custom recovery,twrp.
Fourth, after your device start running take backup from twrp recovery. That will save you from most of the trouble.
Most of the details and instructions are already here
Click to expand...
Click to collapse
hey thanks a lot, im feeling better ow. There's just one issue left: I cant download the original firmware (it's 699mb, and the download keeps stopping midway through it). What happens if I go into clockwork recovery mode and do a factory reset? would that bring me to the original OS? Im kinda scared of downloading an erroneous file again.
EDIT: im doing a factory reset and then flashing this rom called AOSP Project Android 5.1.1 Lollipop on Samsung Galaxy Tab 2 7.0 P3110 which is a 161mb file. Will that work?

aguscanzani said:
hey thanks a lot, im feeling better ow. There's just one issue left: I cant download the original firmware (it's 699mb, and the download keeps stopping midway through it). What happens if I go into clockwork recovery mode and do a factory reset? would that bring me to the original OS? Im kinda scared of downloading an erroneous file again.
EDIT: im doing a factory reset and then flashing this rom called AOSP Project Android 5.1.1 Lollipop on Samsung Galaxy Tab 2 7.0 P3110 which is a 161mb file. Will that work?
Click to expand...
Click to collapse
Factory reset is just clearing data and cache, if you have made changes in kernel or system, factory reset won't reset them, in your case, system has been altered so you will have to format system, then flash the new rom. If you were on jelly bean stock, you are good to flash it.

billysam said:
Factory reset is just clearing data and cache, if you have made changes in kernel or system, factory reset won't reset them, in your case, system has been altered so you will have to format system, then flash the new rom. If you were on jelly bean stock, you are good to flash it.
Click to expand...
Click to collapse
You guys have helped me a lot. I've worked everything out and now i've got to reinstalling android on it, AOSP's 5.1.1 Lollipop. It's beautiful. There's just one problem: Since it came with no apps at all, I wanted to install everything on it again. Problem is, when I go to google play, it shows that i've already got my apps installed, so it wont let me download them, and it doesn't matter if I place the APK's inside the tablet as there's no manager to open them. Even if I download apk's through the tablet's own web browser, it says it can't open the file. Any ideas on this?