Related
Hi all,
I'm using CleanRom 2.3 with Unlocked bootloader and it seems that since I unlocked the bootloader, Hulu Plus is no longer working. I did some research and found some tools to patch the apk Hulu app and Flash (don't ask me how I did it, because of trying errors). I have tested these two apps on my device and it's working. Before I could make this available to all, I would like to have 5 testers, just PM me. If you don't like my thread, please just stay away and don't leave any comments. Thank you.
FYI: I'm not responsible for messing up your device. This is your own choice, so take the responsibility. Also I am NOT taken any credit for this since I didn't wrote/developed any coding.
Test Test
Would be outside US region
buhohitr said:
Hi all,
I'm using CleanRom 2.3 with Unlocked bootloader and it seems that since I unlocked the bootloader, Hulu Plus is no longer working. I did some research and found some tools to patch the apk Hulu app and Flash (don't ask me how I did it, because of trying errors). I have tested these two apps on my device and it's working. Before I could make this available to all, I would like to have 5 testers, just PM me. If you don't like my thread, please just stay away and don't leave any comments. Thank you.
FYI: I'm not responsible for messing up your device. This is your own choice, so take the responsibility. Also I am NOT taken any credit for this since I didn't wrote/developed any coding.
Click to expand...
Click to collapse
If your patch makes it also available for outside US, count me in as well
Uninstalled Flashplayer and HULU + through titanium Check
Installed Flashplayer successfully Check
Installed HULU+ negative App did not install
jokapo said:
Uninstalled Flashplayer and HULU + through titanium Check
Installed Flashplayer successfully Check
Installed HULU+ negative App did not install
Click to expand...
Click to collapse
Check your PM.
Dear Forum Members - This is my first post in XDA and so my apologies if I missed any protocols. I have a Samsung Galaxy S2 International Version. Just like many of you, I got fed up with Touchwiz and flashed CM 10.2 using Cyanogenmod Instaaller. While the performance exceeded my expectations by a huge margin, I am facing one small problem with installation of Google Earth. Since Google Earth is not available in my country through Play Store yet, I usually download the apk and install it. I did the same after moving to CM 10.2 amd installed the old app from my backup, but realised there is an updated version of Google Earth V 7.1.3 available and downloaded the same from a popular tech site. The problem is after I uninstalled the old app, I am unable to install either the new version or the old version. I keep getting the Out of Space: Titanium Backup could not be installed error even though there is lot of space still available. When I faced similar trouble with Titanium Backup Pro earlier, I found online that by deleting /system/app for file Titanium....odex. file and it worked flawlessly. However, I cant find any such file for Google Earth. Can someone please help solve this issue? Thanks in advance
Galaxy S2
Cyanogenmod 10.2 flashed through installer
Hello Everyone,
I want to inform you all that i googled about the problem since 20 days and i did not got the solution. Ultimately i made my mind to ask to the masters of android in XDA forums. My problem is as follows:-
My Device : Xolo Q700s
OS : Stock ROM Jelly Bean 4.2.2
Status : Rooted using SuperSu
Recovery : TWRP 2.5
Problem : -
->I already converted many apps from user app to system app successfully. However I am unable to convert VLC player and Whatsapp to system apps successfully.
->When I try to convert them, they are converted to system app but when i launch them, they crash and close.
->I also confirmed while checking these apps in /system/app. And Yes these apps were placed there.
->Hence I am very helpless. Also I read some where that this problem is related to system libraries.
->I tried all the methods and apps from playstore but all i got was failure.
I hope you might have got my problem. And I seroiusly need help from you all. Please help me since I am also a great follower of android.
Thank you in advance.
CuriousAboutAndroid said:
Hello Everyone,
I want to inform you all that i googled about the problem since 20 days and i did not got the solution. Ultimately i made my mind to ask to the masters of android in XDA forums. My problem is as follows:-
My Device : Xolo Q700s
OS : Stock ROM Jelly Bean 4.2.2
Status : Rooted using SuperSu
Recovery : TWRP 2.5
Problem : -
->I already converted many apps from user app to system app successfully. However I am unable to convert VLC player and Whatsapp to system apps successfully.
->When I try to convert them, they are converted to system app but when i launch them, they crash and close.
->I also confirmed while checking these apps in /system/app. And Yes these apps were placed there.
->Hence I am very helpless. Also I read some where that this problem is related to system libraries.
->I tried all the methods and apps from playstore but all i got was failure.
I hope you might have got my problem. And I seroiusly need help from you all. Please help me since I am also a great follower of android.
Thank you in advance.
Click to expand...
Click to collapse
U can try system/app mover in Google Play Store,it's free and very useful. But u need root... It helped me,i moved Gboard as sys app,stock CM camera removed and changed with Asus ZenPixel and stock CM Messenger with new Google Official Messaging App
THIS THREAD IS OBSOLETED DUE TO THE SUCCESSOR PROJECT
https://forum.xda-developers.com/android/software/lineageos-microg-t3700997
Hello folks,
aim of this project is to provide a mature rom for android devices bundled with the free google apps implementation microG. For now i just take the latest LineageOS, apply some required patches, add microg and build it afterwards.
I started this project, because i became frustrated, when i wanted to get my phone google free, cause there where so many constraints to fullfil, before microG fully works. - And after an rom update, the half is broken again.
Required steps to make microg work after fresh install:
Install a UnifiedNLP location- and address lookup backend. Search in F-Droid for 'nlp'. I recommend MozillaNlpBackend and NominatimNlpBackend.
Grant signature spoofing permission to 'microG Services Core' and 'FakeStore': Settings -> Apps -> ⚙ (gear) --> App permissions -> Spoof package signature -> 3 dots (tripple colon) -> Show System
Enable Google device registration, Enable Google Cloud Messaging, enable Google Safety Net (if not rooted)
Open microG Settings -> Self-Check -> Tap everything is missing. It might ask you to do some settings.
Some free app substitutions i can recommend (F-Droid):
Google Play Store -> YalpStore
Google Contact Sync -> DAVdroid
Facebook -> SlimSocial for Facebook
Twitter -> SlimSocial for Twitter
YouTube -> NewPipe
Homepage and Downloads:
https://microg.me/
What is microG?
https://microg.org/
XDA:DevDB Information
microG.me , ROM for all devices (see above for details)
Contributors
Simon94, LineageOS, MaR-V-iN
Source Code: https://github.com/microg-kittchen/
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: Abandoned
Created 2017-09-13
Last Updated 2017-11-06
Awesome, I will surely try it in the next few days.
'Edit: In case of my Oneplus 5, which version would I download?
ipredatorv said:
Awesome, I will surely try it in the next few days.
'Edit: In case of my Oneplus 5, which version would I download?
Click to expand...
Click to collapse
Oneplus 5 is cheeseburger. Just download the latest one.
Nice!! I'm downloading it now for my Oneplus One, and I'll post back with my experience after installing it. This will be my first exposure to the microG concept, I've read a lot about it, but never wanted to jump through the hoops to set it up. Now you have made it possible to try out. Thanks much!!
I've just updated the OP to give new microg users first instructions, what is needed to configure in order to make everything work.
Simon94 said:
I've just updated the OP to give new microg users first instructions, what is needed to configure in order to make everything work.
Click to expand...
Click to collapse
Thank you for taking the time to do that, I would have been at a loss as to what to do without those instructions. As I said, I'm a total noob where microG is concerned, but with your ROM, I certainly intend to find out what I've been missing! :good:
Do you compile microG with the ROM (i.e. it is signed by you) or do you copy it into the ROM (i.e. signed the same as on the official download area?
Makes a difference for those who would like to upgrade microG via F-Droid.
Lineage is self signed, while microg apks are taken as they're provided from microg project.
I'm willing to always add the latest prebuilts to my builds, therefore OTA updating should be enough for most users.
I finally got your rom up and running, and I must say I'm impressed! Magisk installed just fine. My custom modded Youtube app is working well. And using the Yalpstore I can access things on Play store just fine! I noticed that one or two apps that were licensed as Pro versions that I restored via Titanium Backup now complain that they want me to purchase a Pro license to give me full access to all features. I'm still digging into that issue.. All in all, this test on my OnePlus One is going just fine, so far...
OK, couple of questions, if you don't mind.. When you put out a daily build, or whenever I choose to update the rom, can I dirty flash safely? Second question is if dirty flash will work, can I safely assume that I don't have to do all the setup tasks you outlined in the OP to get microG up and running? It wasn't all that hard, but as a first timer, I'd say it wasn't the simplest task in the world. hah
I realize that doing a clean install will require me to set up microG again, but I'd rather avoid that if possible??
Was it an in-app payment? I'm not sure, whether this is fully working with the current state of the implementation of google apis. In YalpStore you can logout the default shared account and login using your credentials to install your previously bought application.
Dirty flashing nightlys either via OTA updater app or manual should not be a problem. I was doing so for more than 2 years without any problem. At least as long as you stay within one major version. - F for updating to Oreo i'd strongly recommend to do a clean flash.
Simon94 said:
Was it an in-app payment? I'm not sure, whether this is fully working with the current state of the implementation of google apis. In YalpStore you can logout the default shared account and login using your credentials to install your previously bought application.
Dirty flashing nightlys either via OTA updater app or manual should not be a problem. I was doing so for more than 2 years without any problem. At least as long as you stay within one major version. - F for updating to Oreo i'd strongly recommend to do a clean flash.
Click to expand...
Click to collapse
I got the Pro issues solved. Logging in with my credentials did the trick, thanks!
That's good news re: dirty flashing, I like that! I doubt that I'll be going to Oreo anytime soon on the OnePlus One. There are a couple of 'test' roms out, but they are far, far away from being a daily driver. I do believe I'll be sticking with yours for the foreseeable future.
Again, I appreciate your hard work and effort spent in providing a rom that can get me un-tetherd from Google, for the most part.
Another question for you. How would I know if a nightly really needs to be flashed without a changelog to refer to? I know that doing a changelog every day is a big ask, but is there anywhere I could at least get an idea of any changes or updates made??
Since i just take upstream lineageos, take a look into their changelog. But since i build daily, also the section "Changes to be included in next build" is likely included in my builds.
For your device it would be: https://download.lineageos.org/bacon/changes/
Great, thanks again!
@Simon94 can you please add oneplus2 to the list?
Thanks!
Edit: forget it, just see you has already done
Good idea. Can you imagine to build for condor or wt88047 as well?
Good to see kenzo in the list... Surely I'll give a try... Alao i would like to ask, that will microg break any stuffs of hangout nd google duo....?
Is it possible to cover the Moto E4 snapdragon variant?
kurtn said:
Good idea. Can you imagine to build for condor or wt88047 as well?
Click to expand...
Click to collapse
Initial build was successful. Just added both devices to the build roster.
hasan4791 said:
Good to see kenzo in the list... Surely I'll give a try... Alao i would like to ask, that will microg break any stuffs of hangout nd google duo....?
Click to expand...
Click to collapse
Pretty sure it does. But you may better ask in the microg Thread:
https://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616
KyleBryant said:
Is it possible to cover the Moto E4 snapdragon variant?
Click to expand...
Click to collapse
Unfortunately not. There is no lineage for this device.
Well dang, maybe one day.
Good evening,
I restarted my old Samsung Galaxy Tab 2 10.1 after a long time. However, it is now slow and I can no longer install recent apps. I like the apps I like to use are Onedrive, Word, Outlook.. Which software should I upgrade the tablet to, so that I can use Onedrive, Word apps?
I have read up a bit but otherwise I am a layman.. Can anyone help me?
Thanks in advance.
Powerfix23 said:
Good evening,
I restarted my old Samsung Galaxy Tab 2 10.1 after a long time. However, it is now slow and I can no longer install recent apps. I like the apps I like to use are Onedrive, Word, Outlook.. Which software should I upgrade the tablet to, so that I can use Onedrive, Word apps?
I have read up a bit but otherwise I am a layman.. Can anyone help me?
Thanks in advance.
Click to expand...
Click to collapse
Androd 6 is the best option. But reccently there is an android 8 rom developed for tab 2. I myself haven't tried it but you can have a look at the thread here.
These are some best roms:
Resurrection remix : https://www.google.com/url?sa=t&sou...FjAAegQICBAC&usg=AOvVaw1PxtYepshuVJGhwILyAok1
This is the best as per my experience. Its Android 6 and also fast. It is fastest without gapps and I'll recommend don't install them since Microsft apps work without play services.
Lineage os 13 : https://www.google.com/url?sa=t&sou...FjABegQIAxAC&usg=AOvVaw0ngVERkcUHwdW6OdL7FTx8
This is another great one and works well. Again, with gapps it's slow (and mostly all roms are). Its an Android 6 rom.
Slimrom 4.4 : https://www.google.com/url?sa=t&sou...FjAAegQIAxAC&usg=AOvVaw1pIY6ZrmjDiXzCAxuW-p9R
To be honest, this rom would have been the first in my list but it isn't because it's kitkat (android 4.4.4) and that means less apps support. It is faster than android 6 roms and also stable.
Last suggestion : don't go for android 7 roms. Without gapps they are as slow as android 6 roms with gapps.
If we install without gapps whats the best way to get apps like Facebook and youtube if we don't have playstore?
Idk if facebook needs gapps or not, but normal youtube will not work without them, there's things like microg and vanced.
Use aurora store to get apps from google play store without gapps.
Simple and easy all you need is fdroid store and you'll find all apps you need there including youtube apps like newpipe, libretube, etc..
Start exploring life without gapps, it's less stressful for your device and your life
can you have the stoke rom of samsung galxy tab 2 10.1 like icechream sandwhich
f
Deleted member 11418521 said:
Last suggestion : don't go for android 7 roms. Without gapps they are as slow as android 6 roms with gapps.
Click to expand...
Click to collapse
Good night
I know this forum is old and this topic will be somewhat forgotten, but after some hard work and tinkering that I have put into these teams, I decided to share my experiences and recommendations for their devices.
To begin with, in recent times all computers with versions prior to 6.0 and all those related to Marshmallow are becoming obsolete, adding versions such as Dhollmen, RRemix or Cyanogenmod 13, which although remarkably stable, many programs have already lost their compatibility, but very soon i found a solution for these problems.
Inquiring in the Microg forums there is talk of a native Spofing support for Omniroms, and with this in mind I decided to try the latest version of Nougat to see what result can be achieved, and since then I continue using this system that has given me so far good results.
for all devices (P31XX and P51XX) I use Anykernel created by Android-Andi: https://forum.xda-developers.com/t/kernel-unified-anykernel.3484739/page-11#post-79313152
Link of the Omniroms build forums (choose your corresponding model):
Downloads for : Samsung Galaxy Tab 2 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
And for great performance use Nanodroid Microg:
Nanolx.org Downloads Archive
I flash this and at boot up active from "microg settings" all the boxes are empty.
So far for those who read it, leave your comments, finally I only have a problem that is when trying to put full screen on YouTube, which until now I have not found a solution but I can live with it.