Related
Okay. I have read quite a bit on this forum regarding the ROMs and CWM. I have rooted my phone and am looking to add Gummy Charge. I have never done this with a phone and the rooting process was nerve racking knowing what could be the consequences. I use this phone for work, but would like to enjoy it while I have it.
As I said, I have read quite a bit, but am still confused. I have a few questions:
1) Define flash.
2) I have dowloaded the following files:
- GummyCharged_FE_1.9.1_FullOdin.tar.md5.7z
- 0817_charge_recovery.tar.md5
- Voodoo-stable-5.5-Froyo-GT-I9000-odin-pda.tar
Are these the files I need for this process?
3) What order to add these to the phone through Odin?
4) Once these are added, do I start up after each install?
I think this will cover it for now.
I appreciate everyone's time and hope this is not a repeat series of questions. I really appreciate all developers and the time they have spent putting all this together for our benefit.
Scott
K so forget the i9000 file all together. Actually just delete it before you really screw something up.
Flashing is the act of overwriting system partitions with alternate firmware. Thats my best shot at a clear def.
On to the rest. Be sure youve got odin set up properly drivers and all.
Now all youve got to do is flash the gc1.9 odin package. Let boot. Go back to download mode then flash recovery in odin and let the phone boot.
Ps you may not need to flash the recovery in odin but i can't remember if that gc package includes one do you might as well just do it....
Also I believe that package includes a voodoo kernel so it could take quite a while to boot up the first time..
Happy flashing my friend!
Sent from my Gummy Charged GBE 2.0 using XDA App
Thank you for your quick response.
I'm assuming I have all the drivers for Odin since I used it for the rooting process.
If there is something I may be overlooking please let me know.
You mention:
Now all youve got to do is flash the gc1.9 odin package. Let boot.
Click to expand...
Click to collapse
Is this what I use Odin for or is Odin only used to "place" the file in the phone? Are there steps that I need to do to "flash" the phone or do I just boot up and I'm now running Gummy Charge.
TacticalMonk said:
Thank you for your quick response.
I'm assuming I have all the drivers for Odin since I used it for the rooting process.
If there is something I may be overlooking please let me know.
You mention:
Is this what I use Odin for or is Odin only used to "place" the file in the phone? Are there steps that I need to do to "flash" the phone or do I just boot up and I'm now running Gummy Charge.
Click to expand...
Click to collapse
all you need to do is get the phone into download mode and connect it with Odin open on your pc, press PDA (NOT PHONE) and browse for the Gummy odin package ending in .tar.md5, place the battery back in and press start then let Odin flash the rom to your phone... when its finished unplug your phone and remove battery, then put it back in and boot the phone up (first bootup may take a while so bear with it) then enjoy your rooted and custom rom'd phone... using ClockWorkMod that installs with the rom you can then flash anything you want in the future like newer kernels or different roms
blazing through on my 4G Droid Charge
Hello there guy's I'm new with rooted charge phones. Well guy's last night I did a stupid thing with my phone.. I accidentally updates my phone with the new OTA FP1 with rooted rom. Well guy's now my phone is screwing up.
So I followed few steps on at XDA.. How to fix my phone.. So I got my phone on stock rom and also I got the new update OTA FP1.
Well guy's I need some help on rooting this phone with the new update stock OTA FP1 rom.
The person who help me on rooting my phones he left to a church mission at south Africa.
Could any one please guide me on steps on rooting this phone on the new stock Rom (FP1) rooted also includes radios, kernel.
Please I need help guides steps with this phone issues because I'm not great person on rooting.
Sent from my SCH-I510 using xda premium
sgtkillspot said:
Hello there guy's I'm new with rooted charge phones. Well guy's last night I did a stupid thing with my phone.. I accidentally updates my phone with the new OTA FP1 with rooted rom. Well guy's now my phone is screwing up.
So I followed few steps on at XDA.. How to fix my phone.. So I got my phone on stock rom and also I got the new update OTA FP1.
Well guy's I need some help on rooting this phone with the new update stock OTA FP1 rom.
The person who help me on rooting my phones he left to a church mission at south Africa.
Could any one please guide me on steps on rooting this phone on the new stock Rom (FP1) rooted also includes radios, kernel.
Please I need help guides steps with this phone issues because I'm not great person on rooting.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Follow direction #5:
http://forum.xda-developers.com/showthread.php?t=1560117
re
I was fuclking frustrated when trying to CWM / ROOT / CUSTOM rom my charge.
I have rooted and installed more roms than i can shake a stick at with my other phones.
But the lack of information on sooooo many of the dev threads that leave out soooooooooooooooooooooooo much info made my head spin.
First of all.
Odin is a program that you can install clockword mod with, as well as some custom roms.
Clockwork mod is a recovery / install tool that you install to be able to install custom roms and packages.
Even installing clockwork mod is a hassle, often you have to install it with odin and select, dont auto reboot. then pull the usb and then the battery.. then you have to hit the VolumeUp button + power + home to get into cwm.. and hopefully it will stick..
Once you get cwm installed you have to download a rom..
There are many of them, i went with a package that you load via odin instead of installing from clockwork mod.
i went with a package that was a stock 2.3.6 with root.
after i installed it, it was recommended that you wipe devlink cache, system cache.
finally after i rebooted i finally had a rom that was rooted.
This was after 2+ hours of searching through threads, downloading way too much crap and swearing at my computer for the lack of quality directions.
Usually XDA is rife with STICKYS that are easy to follow.
The charge forum is quite the opposite.
If i was not tired / drunk and frustrated i would post a correct HOW TO thread.. that i would imagine would not get stickied.
sprintrjm said:
I was fuclking frustrated when trying to CWM / ROOT / CUSTOM rom my charge.
I have rooted and installed more roms than i can shake a stick at with my other phones.
But the lack of information on sooooo many of the dev threads that leave out soooooooooooooooooooooooo much info made my head spin.
First of all.
Odin is a program that you can install clockword mod with, as well as some custom roms.
Clockwork mod is a recovery / install tool that you install to be able to install custom roms and packages.
Even installing clockwork mod is a hassle, often you have to install it with odin and select, dont auto reboot. then pull the usb and then the battery.. then you have to hit the VolumeUp button + power + home to get into cwm.. and hopefully it will stick..
Once you get cwm installed you have to download a rom..
There are many of them, i went with a package that you load via odin instead of installing from clockwork mod.
i went with a package that was a stock 2.3.6 with root.
after i installed it, it was recommended that you wipe devlink cache, system cache.
finally after i rebooted i finally had a rom that was rooted.
This was after 2+ hours of searching through threads, downloading way too much crap and swearing at my computer for the lack of quality directions.
Usually XDA is rife with STICKYS that are easy to follow.
The charge forum is quite the opposite.
If i was not tired / drunk and frustrated i would post a correct HOW TO thread.. that i would imagine would not get stickied.
Click to expand...
Click to collapse
Hey bro, no need to get frustrated, you tried too hard to learn all at once. Let talk about what you have on your phone and what you want to achieve? I will take you through step by step.
Another thing I want to clear with you about Odin and CWM. They both are two useful tools to flash rom/kernel etc.. If kernel or full rom image are created in a ZIP format or extension, you use cwm. If a rom/kernel created in a MD5 format or extension, you would use Odin.
For example; the new FP1 kernel was made in both format so you have a choice to use either to flash.
Summary:
1. If the file ended with ZIP extension like "FP1_kernel.ZIP", you would use CWM to flash.
2. If the file ended with MD5 extension like "FP1_kernel.MD5", then you would use Odin to flash.
In order to use cwm, it has to be installed on your phone. cwm was created in MD5 extension, so you need to use Odin to install cwm to your phone. Once cwm installed on your phone, in order to access it, you need to hold Vol up+home+power button to get to it, then you can use it to flash zip file.
Odin is an execution PC file (.exe), you download and install on your PC and it used to flash MD5 file. In order for Odin to talk to your phone, you have to put your phone in "download mode". By remove battery, plug in usb cable between your PC and phone, press Vol down button, this will put your phone in download mode, now you re insert battery back to ensure a stable data transfer between your PC and phone. Without put back battery, data transfer may fail. After this, Odin is ready to flash Md5 file to your phone.
Like I said, let me know what's on your phone and what you want to achieve, I can help you step by step to get it done. After you have some practice, you will understand what involved and how to use them. Cheers!!!
re
yeah.. i should have just read through the forums a day or so to figure out the odin / rooting / rom process for this phone.
But i am a seasoned vet in the android world and got pretty frustrated, mainly because a few of the other xda forums made me a little jaded by the process.
I have a fully functioning 2.3.6 rooted charge with CWM and the edited build prop to keep the Unwanted ota updates from bugging me.
Thanks for not flaming the f-out of me.
BTW have yall come across a thread about sandblasting or sandpapering the back cover of the phone to make it less slippery? I have sweaty f-ing hand, i know gross, but its a slippery phone for me.
sprintrjm said:
yeah.. i should have just read through the forums a day or so to figure out the odin / rooting / rom process for this phone.
But i am a seasoned vet in the android world and got pretty frustrated, mainly because a few of the other xda forums made me a little jaded by the process.
I have a fully functioning 2.3.6 rooted charge with CWM and the edited build prop to keep the Unwanted ota updates from bugging me.
Thanks for not flaming the f-out of me.
BTW have yall come across a thread about sandblasting or sandpapering the back cover of the phone to make it less slippery? I have sweaty f-ing hand, i know gross, but its a slippery phone for me.
Click to expand...
Click to collapse
Not a problem, you can get a back cover from ebay for a few bucks and it will do the trick.
Seems like you already knew how to handle cwm, why don't you flash (using cwm) FP1 eclipse rom, kernel and radio, so you will be on the latest O/S?
I've tried everything I can think of to get ClockWorkMod working on the SGH-T959V. I have rooted the phone with SuperOneClick and I've installed ROM Manager. After I start rom manager and select 'Flash ClockworkMod'. I get a list of 4 phones and mine isn't listed, the closest one is the Samsung GalaxyS i9000 which I have tried but when I reboot into recovery I never get the ClockworkMod Recovery.
Any ideas are greatly appreciated.
Thanks.
Rom manager doesn't work with our phones to get cwm you have to flash a kernel that has it in it
Sent from my GT-P7510 using XDA
1) DO NOT use ROM Manager (or as Raver memorably put it, ROM Mangler) on this phone - you will mess it up.
2) Any of the modified kernels in the Development section will give you CWM. Try AntonX's kernel (assuming you are on a stock ROM) - I found it gave best results. Use the SGS Kernel Flasher from the Market/Play - it's the easiest way to install a new kernel.
3) Before asking any more questions, read Read READ. Read the guides and the stickies, then read them again. I have found the guides of lumin30 and juls317 to be very helpful.
If your phone is still on Froyo, then look in the Dev section for Krylon360's recovery. If you're on Gingerbread then read the post above this one as there are plenty of ROMs/kernels for this phone that have CWM.
Really man, do you read.
Sent from my SGH-T959V using xda premium
The easiest way is just get one of the one click packages. I just updated the thread today. Note it is a sticky thread. It will always be easy to find at the top of the dev forum
No need to flash the whole rom or fuss with odin or heimdall cli/frontend.
Lets keep the thread friendly. Please search
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
jet_98 said:
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
Click to expand...
Click to collapse
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
xc-racer99 said:
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
Click to expand...
Click to collapse
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
jet_98 said:
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
Click to expand...
Click to collapse
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
xc-racer99 said:
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
Click to expand...
Click to collapse
If you are in the correct idea that's what happens to me
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
jet_98 said:
If you are in the correct idea that's what happens to mein the state you are in, can you get to
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
Click to expand...
Click to collapse
Ok, I might be able to understand some of the Spanish as I speak French as well, but lets keep going in English.
Anyways, when you go into recovery (I assume you can still get into recovery), does it say <3e> or CWM? If it says CWM, is it red or blue? If its <3e>, then you're still on stock recovery and the kernel didn't flash properly.
Also, can you please go to Settings, About Phone, and read off the Kernel Version? If you can't get there, what is the last screen you see before it reboots?
Hello Canadian users with SGH-T959W!
I spent some time the last few days comparing the kernel source for SGH-T959W and SGH-T959V, and found they are exactly the same (plus a few fixes for us on SGH-T959V from the SGH-T959W source!)!
This is good for you, because we have unofficial cm7, cm9, aokp, et alii... ports for the SGH-T959V.
Maybe a forum admin could update the Samsung Galaxy S 4G forum to also say: SGH-T959V & SGH-T959W
Technically, the only real difference is that the stock roms for the SGH-T959W will have different pre-installed software. The hardware of the SGH-T959W is the same as the SGH-T959V.
Enjoy!
Read this stuff to continue:
http://forum.xda-developers.com/showthread.php?p=28566711#post28566711
BTW, if anyone has an odin or kies tarball, please PM me!
This way I can verify if the bootloaders are different or not, and if they are different, I can make you guys custom Heimdall OneClick and Odin packages.
bhundven said:
I spent some time the last few days comparing the kernel source for SGH-T959W and SGH-T959V, and found they are exactly the same (plus a few fixes for us on SGH-T959V from the SGH-T959W source!)!
Click to expand...
Click to collapse
Sorry to bump this thread, but out of curiosity, what were the fixes you were able to implement after seeing the kernel source for the 959W?
If it's something you'd rather not explain and will just be rolling out in future kernels, no big deal; just curious.
Thanks.
fingolfin14 said:
Sorry to bump this thread, but out of curiosity, what were the fixes you were able to implement after seeing the kernel source for the 959W?
If it's something you'd rather not explain and will just be rolling out in future kernels, no big deal; just curious.
Thanks.
Click to expand...
Click to collapse
The hardware is exactly the same. There is still a problem with the OTA Assert, meaning, how the rom knows if it is able to install on the phone or not during install from cwm. Also how it identifies itself to the play store.
I'm fixing this in the next cm9 unofficial release (coming soon, eta... a few hours, maybe).
The only real difference between SGH-T959V and SGH-T959W is the pre-installed/bundled software on the phone.
Everything else is one-to-one.
I'm still paranoid about bootloaders. So I'm still waiting for someone to post Kies or leaked tar.md5 for the SGH-T959W so that I can diff the bootloaders. If they are different, I will create new Heimdall OneClicks for SGH-T959W so that it is simple for you to go back to stock. See my current Heimdall OneClick thread to get an idea of what I mean.
On the other hand, we have some issues with our SGH-T959V bootloaders, and I have Unbrickable Mod on my phone. So, if the bootloaders are different, I would like to try flashing the SGH-T959W bootloaders to see if they work any better.
Also, there are a few fixes in the SGH-T959W kernel source that I will be incorporating into the current unofficial CM7 and CM9 ports I work on. Not having these fixes shouldn't have any negative impact on SGH-T959W.
I hope this info is informative. If not, ask more!
I have a SGH-T959W which seemed to have a bad flash already (from before.. and I am trying to revive it) on it (seems stuck on the cwm screen, and the system partition doesn't seem to have all the data that it needs to). Is there any way of getting the original ROM for this phone? Even if I install a cm build for the T959V, I don't get errors but its stuck in a cwm loop (keeps coming back to cwm).
When I try any of the one-clicks for the T959V, it succeeds on the kernel upload but always fails on the modem upload.
Where would you look for the Kies tar for this phone? Any possible way of getting the original ROM from a brand new phone? (any instructions for these would be great)
bhundven said:
The hardware is exactly the same. There is still a problem with the OTA Assert, meaning, how the rom knows if it is able to install on the phone or not during install from cwm. Also how it identifies itself to the play store.
I'm fixing this in the next cm9 unofficial release (coming soon, eta... a few hours, maybe).
The only real difference between SGH-T959V and SGH-T959W is the pre-installed/bundled software on the phone.
Everything else is one-to-one.
I'm still paranoid about bootloaders. So I'm still waiting for someone to post Kies or leaked tar.md5 for the SGH-T959W so that I can diff the bootloaders. If they are different, I will create new Heimdall OneClicks for SGH-T959W so that it is simple for you to go back to stock. See my current Heimdall OneClick thread to get an idea of what I mean.
On the other hand, we have some issues with our SGH-T959V bootloaders, and I have Unbrickable Mod on my phone. So, if the bootloaders are different, I would like to try flashing the SGH-T959W bootloaders to see if they work any better.
Also, there are a few fixes in the SGH-T959W kernel source that I will be incorporating into the current unofficial CM7 and CM9 ports I work on. Not having these fixes shouldn't have any negative impact on SGH-T959W.
I hope this info is informative. If not, ask more!
Click to expand...
Click to collapse
phaedrus81 said:
I have a SGH-T959W which seemed to have a bad flash already (from before.. and I am trying to revive it) on it (seems stuck on the cwm screen, and the system partition doesn't seem to have all the data that it needs to). Is there any way of getting the original ROM for this phone? Even if I install a cm build for the T959V, I don't get errors but its stuck in a cwm loop (keeps coming back to cwm).
When I try any of the one-clicks for the T959V, it succeeds on the kernel upload but always fails on the modem upload.
Click to expand...
Click to collapse
This is annoying, sorry you are going through this. It sounds like something dorked your param.lfs.
I've had this happen to me, and it always appends 'bootmode=2' to the kernel command line. Only way to fix it is to flash a new param.lfs from the stock image...
phaedrus81 said:
Where would you look for the Kies tar for this phone? Any possible way of getting the original ROM from a brand new phone? (any instructions for these would be great)
Click to expand...
Click to collapse
...which brings me to this part. Someone told me that they have this image, but when I asked them to post it somewhere, I got no response.
Bug Wind and Samsung for a kies mini or a stock image that you can flash to the phone. Samsung is probably not going to be as helpful as Wind, so I'd try bugging the crap out of Wind.
Hopefully someone will get me the tar.md5 soon, and we can get you guys a one-click with bootloaders (which includes the param.lfs).
If you feel bold/brave, you can try flashing the bootloaders from my Stock oneclick in my signature.
Since it should be the same hardware it should work the same. Granted after flashing your phone will now be a SGH-T959V and not an SGH-T959W.
I hold no guarantee that it will work, and/or that it won't try to shoot you at your favorite new 3d film. <.< ... >.>
Thanks for the info about what might be causing the cwm loop issue
I think I will the one-click with bootloaders a try (will update this thread with the results). At this point I think I have exhausted all other options to revive the device.
bhundven said:
This is annoying, sorry you are going through this. It sounds like something dorked your param.lfs.
I've had this happen to me, and it always appends 'bootmode=2' to the kernel command line. Only way to fix it is to flash a new param.lfs from the stock image...
...which brings me to this part. Someone told me that they have this image, but when I asked them to post it somewhere, I got no response.
Bug Wind and Samsung for a kies mini or a stock image that you can flash to the phone. Samsung is probably not going to be as helpful as Wind, so I'd try bugging the crap out of Wind.
Hopefully someone will get me the tar.md5 soon, and we can get you guys a one-click with bootloaders (which includes the param.lfs).
If you feel bold/brave, you can try flashing the bootloaders from my Stock oneclick in my signature.
Since it should be the same hardware it should work the same. Granted after flashing your phone will now be a SGH-T959V and not an SGH-T959W.
I hold no guarantee that it will work, and/or that it won't try to shoot you at your favorite new 3d film. <.< ... >.>
Click to expand...
Click to collapse
phaedrus81 said:
Thanks for the info about what might be causing the cwm loop issue
I think I will the one-click with bootloaders a try (will update this thread with the results). At this point I think I have exhausted all other options to revive the device.
Click to expand...
Click to collapse
Also, just to make sure you have tried different cables and computers.
Not being able to flash the modem sounds like a cable/computer issue.
If you have that issue while flashing bootloaders, you could hard-brick your phone.
The first time you flash with the oneclick, it will not flash bootloaders. The second time, the option to flash bootloaders opens up, but you still have to enable it.
Don't forget to read all the documentation in my thread before doing anything.
If you have any questions, ask before you do.
The Root Doesn't work. I follow the step and it damaged my phone! T959W
bhundven said:
Hello Canadian users with SGH-T959W!
I spent some time the last few days comparing the kernel source for SGH-T959W and SGH-T959V, and found they are exactly the same (plus a few fixes for us on SGH-T959V from the SGH-T959W source!)!
This is good for you, because we have unofficial cm7, cm9, aokp, et alii... ports for the SGH-T959V.
Maybe a forum admin could update the Samsung Galaxy S 4G forum to also say: SGH-T959V & SGH-T959W
Technically, the only real difference is that the stock roms for the SGH-T959W will have different pre-installed software. The hardware of the SGH-T959W is the same as the SGH-T959V.
Enjoy!
Read this stuff to continue:
http://forum.xda-developers.com/showthread.php?p=28566711#post28566711
Click to expand...
Click to collapse
I try your root process for my T959W now My phone Can't turn on . It turn on and off with the glaxy S 4G logo and T-Mobile . HELP PLS i tried to unroot It does work and It . PLS HELPPPP!!!!!
GMK63 said:
I try your root process for my T959W now My phone Can't turn on . It turn on and off with the glaxy S 4G logo and T-Mobile . HELP PLS i tried to unroot It does work and It . PLS HELPPPP!!!!!
Click to expand...
Click to collapse
Please be more specific as to which 'process' you followed and what you did.
Sorry I've been delayed in responding!
Again, if you can be more specific as to exactly what you did, I will be better prepared to help you.
It does look like it could be a cable/computer issue. I tried different cables and some of them didn't get as far as the modem (failed the kernel upload as well). Haven't got a cable which succeeds in the modem flash yet.
All of the driver stuff on windows makes me nervous though. Is there any way to flash this on linux. Does the one-click package work with fastboot or can fastboot be used to flash the individual pieces?
bhundven said:
Also, just to make sure you have tried different cables and computers.
Not being able to flash the modem sounds like a cable/computer issue.
If you have that issue while flashing bootloaders, you could hard-brick your phone.
The first time you flash with the oneclick, it will not flash bootloaders. The second time, the option to flash bootloaders opens up, but you still have to enable it.
Don't forget to read all the documentation in my thread before doing anything.
If you have any questions, ask before you do.
Click to expand...
Click to collapse
phaedrus81 said:
It does look like it could be a cable/computer issue. I tried different cables and some of them didn't get as far as the modem (failed the kernel upload as well). Haven't got a cable which succeeds in the modem flash yet.
All of the driver stuff on windows makes me nervous though. Is there any way to flash this on linux. Does the one-click package work with fastboot or can fastboot be used to flash the individual pieces?
Click to expand...
Click to collapse
These phones do not have fastboot, but they have download mode.
Yes, you can do this from: Windows, Linux, or Mac OS X
If you still have problems with multiple cables, I highly recommend trying a different computer. I've had this problem myself before. It drove me nuts until I got a friends laptop and everything worked perfectly. My laptop's usb ports had gone bad for some unexplainable reason.
Check out the wiki pages we have written:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
Steps I followed
managed to get my Wind SGH-T959W rooted and up and running with a unofficial CM9 build, but it took a bit of work.
Firstly, I tried just about every one-click solution out there, to no avail. It's possible SOC 1.7 with rattlethecage works, but I didn't have the patience to find out whether I simply had to wait a bit longer.
I followed this guide(whilst clenching every clenchable muscle I could consciously control):
http://www.galaxyforums.net/forum/of...ngerbread.html
The gist is, Odin 1.7, stock+voodoo for T959V, plus some update that I'm not qualified to describe. That should get you rooted and if that's all you're looking for, you'll have to suffer through a little T-Mobile branding on startup.
Once you got it all rooted, you'd think it'd be a good idea to toss sgs-ics on there, right? Well, no. After installing the 4G variant, it promptly set off into a boot loop which I'm again, unqualified to diagnose. The obvious solution was to try another team's version of ICS, which I indeed found here:
http://forum.xda-developers.com/show....php?t=1730954
Barring some missing features, it sounds like a good alternative to sgs-ics. Though I had to go through one additional step, which I really, honestly assure you I was under-qualified to execute. When I tried to load Team Acid's CM9 r3 it gave me an assert on the updater-script, since the hardware didn't match up. Easy. Unzip the package, open up META-INF/com/google/android/updater-script, remove the first check. You know it's the same hardware, you don't need some stinkin' script to tell you it won't work.
So all said and done, I now have a Wind Mobile SGH-T959W running ICS 4.0.4 courtesy of bhundven, the Odin folks, Team Acid, and likely a slew of other contributors.
Thanks folks, and enjoy!
PS, if you want that tarball bhundven, send me a PM with some brief instructions, and hopefully you can help my fellow Winders.
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode. :crying:
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Thank you in advance for your Help, for replying and offering to help.:highfive:
I appriciate it. My phone is Mobillicity carrier just like wind .
GMK63 said:
.......(---------THAT WHAT I FOLLOWED .
But I did the first part and They said i should get the stuff I store on my SD Card to pull out a file (``12) In CWM, use your volume up/down positions to navigate, scroll down to "Install Zip From SDcard". Select with a click of the power button. Navigate to where you put sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip (in the root of your SDcard) and select with the power button. Confirm you want to install.
``)
but it doesn't give me the option to go get it on my SDcard and Now my Phone just turns on and off with the samsung galaxy S logo plus T-mobile exclusive logo . The only possitive thing about all the damage is that I can still put my phone on dowload mode and I just think if someone knows how to get my phone back to it state they will need me to put it on download mode. :crying:
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Thank you in advance for your Help, for replying and offering to help.:highfive:
I appriciate it. My phone is Mobillicity carrier just like wind .
Click to expand...
Click to collapse
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Confused
bhundven said:
Ok, this is really simple. I've explained it in quite a few threads in the Galaxy S 4G forums in General, Q&A, and the Dev forum. I'm going to explain this, but in a way to be more general. So I'm being verbose in case anyone else with a T959W happens to run across this and has not tried anything yet.
Again, I'm not good with windows at all, and I prefer it that way.
If you're on windows, check out our wiki:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V
There is tons of help there for setting up heimdall on windows with all the right drivers and such.
Once you have heimdall setup get AntonX's latest cwm zip for his kernel.
This kernel is a BML kernel, and this guide I am giving you right now will help you get cm9 installed which is an MTD kernel. You can find out more about BML vs. MTD here.
Once you have downloaded AntonX's kernel, extract the zImage from it and open up the terminal/cmd prompt and navigate to the directory you extracted the zImage to.
Put your phone into Download Mode and type the following in the command prompt:
Code:
heimdall flash --kernel zImage
The heimdall program will flash this kernel+initramfs to the kernel partition and reboot the phone. Do not unplug the usb cable until you see the "Galaxy S" screen. When you see that screen, unplug the usb cable and remove the battery from the back.
Assuming you downloaded CM9 and put it on your sdcard already, you can get into recovery by holding the vol+ and vol-, then pressing the power button to turn the phone on. When you see the "Galaxy S" screen, let go of the buttons, and you should be in the recovery now.
This is where things get a little tricky. If you have not tried to do anything to your phone yet. This would be a great time to use the "Backup and Recovery" menu on CWM. Do a full backup.
The "assert 7" error that the previous person got was because the cwm install script (the updater-script) checks the already installed /system/build.prop's data against the "to be installed" build.prop to verify this rom can be installed. If it doesn't exist, then it moves forward.
So the first order of business is to wipe the /system partition. Go to "Mounts and Storage" and format the system partition.
Now go back to the main screen and do "Factory Reset/Wipe Data".
Now go "Install zip from sdcard" -> "choose zip from sdcard" -> and use the volume keys to select the zip file.
After the rom is installed, navigate back to the main screen and "Reboot the system now" if it doesn't reboot by itself.
When the phone reboots, because it is going from BML to MTD, it obviously can't just install the files to what would be an MTD partition if the kernel knows nothing about MTD. So it boots into the newly installed MTD kernel and continues the installation, which in the end will also reboot again.
The first boot is very slow. It is building a cache of all the pre-installed system applications. Let it sit for a while. I know it's tempting to go play with your phone right away, but resist if you can.
The next CM9 release will be on a different kernel, and albeit a much better rom.
I will also be adding OTA Asserts for SGH-T959W so that you will not have to wipe /system before installing the rom, but I do that still just for good measure. But this also means that your phone will work properly with the google play store.
If this still does not work, please let me know what went wrong and I will be happy to assist!
-Bryan
Click to expand...
Click to collapse
I have Window 7 and I went on wiki. I don't know what rom or what I am suppose to download to get heimdall . Plus the steps is not for T959W.
GMK63 said:
I have Window 7 and I went on wiki. I don't know what rom or what I am suppose to download to get heimdall . Plus the steps is not for T959W.
Click to expand...
Click to collapse
:facepalm:
Then send your phone back to Mobillicity. Tell them that you don't know what a smart phone is and did something stupid to it. Go get yourself a nice clamshell phone.
I gave you explicit instructions that work for SGH-T959V and SGH-T959W. As a matter of fact, these instructions work on any "Galaxy S" phone, but you shouldn't flash just any other phone's rom to any other phone.
It just so happens that the SGH-T959V and SGH-T959W are the same exact hardware, just pre-packaged with different software and sold in different regions.
THEY ARE THE SAME PHONE!
With that, I am done with this thread. It was not meant for support! It was merely an announcement.
If you need any more help, please check out the Galaxy S 4G forums.
You can find plenty of directions that will work on either SGH-T959V or SGH-T959W on the wiki.
If you are looking for general information, look at the General forum.
If you need help or are asking a question, look at the Q&A (Questions and Answers) forum.
If you are looking to provide constructive feedback and/or logs to help development of ROMs and Kernels, check out the Developer forum. (Note, do not ask questions in the developer forum).
Don't forget the XDA Forum Rules
Hello guys. I just bought a used Samsung Galaxy J5 (SM-J500FN) with android version 5.1.1. The previous owner told me that it is rooted. Nothing seems weird with the phone other than when i try to factory reset it it takes me to a "bios" kind window where i have to manually choose to delete all data (hard delete i think its called), that and when i normally turn on the phone, at the top left corner it says "set warranty bit kernel". I was just wondering how do i go about installing custom roms since its already rooted, and can i unblock the default carriers (T-mobile) block for other sim cards. When asked how he rooted it (what method was he using) he said he just used Odin. I dont know much about rooting so, whatever you can tell me as to the handling of the phone would be amazing. Any other guides to installing some custom roms and making the phone easier and faster ( i only want functionality, don't care much about the UI) would be greatly appreciated. Thanks in advance.
luan96 said:
Hello guys. I just bought a used Samsung Galaxy J5 (SM-J500FN) with android version 5.1.1. The previous owner told me that it is rooted. Nothing seems weird with the phone other than when i try to factory reset it it takes me to a "bios" kind window where i have to manually choose to delete all data (hard delete i think its called), that and when i normally turn on the phone, at the top left corner it says "set warranty bit kernel". I was just wondering how do i go about installing custom roms since its already rooted, and can i unblock the default carriers (T-mobile) block for other sim cards. When asked how he rooted it (what method was he using) he said he just used Odin. I dont know much about rooting so, whatever you can tell me as to the handling of the phone would be amazing. Any other guides to installing some custom roms and making the phone easier and faster ( i only want functionality, don't care much about the UI) would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
ShaDisNX255 said:
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
Click to expand...
Click to collapse
That's what I love about Samsung, as long as you have your ducks in a row, the files and tools are extremely easy to use, a 4 year old could do it.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
ShaDisNX255 said:
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
Click to expand...
Click to collapse
Thank you, ill be sure to check them out. Although, i would like to do the entire process from the beginning (root it again myself since i have no idea what the previous owner has done) and then try to install custom roms and other cool features rooting offers. I read that the KNOX security on samsung phones can pose some problems, any thoughts on that ?
Thank you again for your response.
ShaDisNX255 said:
For starters, I'd head over the J5 forum
Galaxy J5 Forums
Or here's a great post that includes a lot of stuff to get started on reading:
https://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-root-twrp-roms-news-tips-t3620892
But the basics are: To flash a custom ROM, research what a custom recovery is, how to flash a custom recovery to your phone model and after that, flashing a custom ROM is as easy as loading the .zip file to your SD card and selecting it in the custom recovery.
I'd also research on how to flash to stock, as this is a life-saver in case you accidentally do something wrong. Pretty much you need to know how to flash via Odin (yes, learning how to use Odin is important to us Samsung users).
Don't worry though, it's not that big of a pain, Odin is pretty easy to learn
Click to expand...
Click to collapse
Also, i use Linux so i hear the alternative to Odin is Heimdall, anyone have any experience with it, or should i just do it on a Windows PC?
luan96 said:
Also, i use Linux so i hear the alternative to Odin is Heimdall, anyone have any experience with it, or should i just do it on a Windows PC?
Click to expand...
Click to collapse
I've got no experience with Linux, sorry. SuperSU disables knox so there's nothing to worry about.
luan96 said:
Also, i use Linux so i hear the alternative to Odin is Heimdall, anyone have any experience with it, or should i just do it on a Windows PC?
Click to expand...
Click to collapse
If you're a Linux user and you have knowledge of using terminal commands then you should have no trouble setting up Hiemdall. Getting full USB functionality set up for the device in Hiemdall can be a pain if you aren't familiar with that kind of thing.
But, having a Windows PC will make a lot of things very simplified for you. A Windows/Linux dual boot system would be very handy to you if you can set that up. Then you could also use Kies/SmartSwitch if it ever comes to a point that you need it.
There are some handy rarely used instances with Linux when it comes to Samsung. They have no fastboot like other devices so only adb is usable. I think they primarily centered around Windows being the preferred OS to interact with their devices.
Droidriven said:
If you're a Linux user and you have knowledge of using terminal commands then you should have no trouble setting up Hiemdall. Getting full USB functionality set up for the device in Hiemdall can be a pain if you aren't familiar with that kind of thing.
But, having a Windows PC will make a lot of things very simplified for you. A Windows/Linux dual boot system would be very handy to you if you can set that up. Then you could also use Kies/SmartSwitch if it ever comes to a point that you need it.
There are some handy rarely used instances with Linux when it comes to Samsung. They have no fastboot like other devices so only adb is usable. I think they primarily centered around Windows being the preferred OS to interact with their devices.
Click to expand...
Click to collapse
Thank you for the info. I already have a dual boot on my pc with windows. I am an experienced Linux user and setting up Hiemdall should not pose a problem, but i opted to go for Windows since as you said makes things simpler.
Still looking for guides and tutorials on how exactly the root process goes. Doing research, so i guess its going to be a late night. If you have any links or pages you can guide me to for my Samsung J5 it would be amazing. Right now am looking around this forum and wherever the links lead me.
Thank you again.
luan96 said:
Thank you for the info. I already have a dual boot on my pc with windows. I am an experienced Linux user and setting up Hiemdall should not pose a problem, but i opted to go for Windows since as you said makes things simpler.
Still looking for guides and tutorials on how exactly the root process goes. Doing research, so i guess its going to be a late night. If you have any links or pages you can guide me to for my Samsung J5 it would be amazing. Right now am looking around this forum and wherever the links lead me.
Thank you again.
Click to expand...
Click to collapse
First, just to make sure that you are not walking blindly into some potential traps.
1) download the root checker app from Playstore, use it to verify whether the device is actually rooted.
2) power the device off, wait 5 seconds, hold volume up+home+power, when it boots past the logo, let go. It should boot to recovery, tell me what you see. Does it say TWRP with grey buttons on a black screen? Or does it have an android lying on his back and have options listed?
3) verify whether or not the bootloader is unlocked or not on your specific device model number with your specific build number/android version, if it's locked it will create problems if you try to flash custom recovery. Though you can flash CF autoroot with locked bootloader.
Then I'll help find what you need to do what you are looking to do. It may be simpler than you think.
If he in fact used Odin and the device is rooted, he did one of three things.
1) flashed custom recovery(TWRP) via Odin then flashed SuperSU.zip to root, not possible with locked bootloader.
2) flashed CF auto root via Odin, potentially leaving stock recovery if your bootloader is locked.
3) flashed a pre-rooted stock firmware via Odin, not likely though.
The first 2 being more likely than the last one, the second one being the most likely if your bootloader is locked.
Edit: @luan96, edited for more information.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
@Droidriven Thank you for the info. After a rough night of research i realized what i need to do. According to root checker, my phone is not rooted, and the recovery seems to be stock. This is very weird, since the phone is obviously not just the stock version that came from T Mobile. Im guessing its probably a badly done root or one that was removed. Anyways, this is how i am planing to proceed:
1. Turn on OEM Unlocking and USB Debugging from developer versions
2. Download CM Autoroot for my specific phone ( i do not know what is the difference between "normal" root and autoroot, but autoroot seems to be simpler and offers the same thing. Please correct me if i am wrong, i would love to know how to do a manual root as well if it has more benefits).
3. Volume down+home+power to get to the download screen
4. Launch Odin that comes with the autoroot package
5. Plug my phone into the USB and wait for Odin to add it.
6. Select the autoroot md5 file from the folder and begin the flashing process
7. Hope for the best and that my phone is still functional when it auto reboots.
After this i should check with Root Checker weather its properly installed or not. If it is, and i see the SuperSU application i continue to installing the custom recovery ( through some research i found out that TWRP is the best choice for me). Installing the custom recovery should be as easy as auto rooting the device. I should download the files from an official website, and flash them using the same process i did for AutoRoot.
After that its mod heaven. With my understanding so far, TWRP lets me install custom roms, and other things i might need.
This is what i plan on doing as soon as im done with a little more research. If anyone has any tips, corrections or general information on what to expect or do please share.
Many thanks to every contributor on this thread.
luan96 said:
@Droidriven Thank you for the info. After a rough night of research i realized what i need to do. According to root checker, my phone is not rooted, and the recovery seems to be stock. This is very weird, since the phone is obviously not just the stock version that came from T Mobile. Im guessing its probably a badly done root or one that was removed. Anyways, this is how i am planing to proceed:
2. Download CM Autoroot for my specific phone ( i do not know what is the difference between "normal" root and autoroot, but autoroot seems to be simpler and offers the same thing. Please correct me if i am wrong, i would love to know how to do a manual root as well if it has more benefits).
3. Volume down+home+power to get to the download screen
4. Launch Odin that comes with the autoroot package
5. Plug my phone into the USB and wait for Odin to add it.
6. Select the autoroot md5 file from the folder and begin the flashing process
7. Hope for the best and that my phone is still functional when it auto reboots.
After this i should check with Root Checker weather its properly installed or not. If it is, and i see the SuperSU application i continue to installing the custom recovery ( through some research i found out that TWRP is the best choice for me). Installing the custom recovery should be as easy as auto rooting the device. I should download the files from an official website, and flash them using the same process i did for AutoRoot.
After that its mod heaven. With my understanding so far, TWRP lets me install custom roms, and other things i might need.
This is what i plan on doing as soon as im done with a little more research. If anyone has any tips, corrections or general information on what to expect or do please share.
Many thanks to every contributor on this thread.
Click to expand...
Click to collapse
I would recommend using the command line to flash the twrp instead of the GUI if you want a simple process in linux
Run a terminal as a superuser (sudo)
heimdall flash –RECOVERY filename.img
Do step 1 and 3 you gave before before doing this
Or just flash the twrp image using Odin
J500FN twrp
https://dl.twrp.me/j5nltexx/
-Hope- said:
I would recommend using the command line to flash the twrp instead of the GUI if you want a simple process in linux
Run a terminal as a superuser (sudo)
heimdall flash –RECOVERY filename.img
Do step 1 and 3 you gave before before doing this
Or just flash the twrp image using Odin
J500FN twrp
https://dl.twrp.me/j5nltexx/
Click to expand...
Click to collapse
I'm going to use Odin for this. Since I'm quite new to the rooting community I dont want to mess things up on the first try. I'd rather get comfortable with some standard stuff before I proceed to try different variations. Thank you for your input. Though I would still like to know if I should use cm auto root or do a manual root. The difference is not quite clear to me yet. Again, thank you for your input, it is appreciated.
luan96 said:
@Droidriven Thank you for the info. After a rough night of research i realized what i need to do. According to root checker, my phone is not rooted, and the recovery seems to be stock. This is very weird, since the phone is obviously not just the stock version that came from T Mobile. Im guessing its probably a badly done root or one that was removed. Anyways, this is how i am planing to proceed:
1. Turn on OEM Unlocking and USB Debugging from developer versions
2. Download CM Autoroot for my specific phone ( i do not know what is the difference between "normal" root and autoroot, but autoroot seems to be simpler and offers the same thing. Please correct me if i am wrong, i would love to know how to do a manual root as well if it has more benefits).
3. Volume down+home+power to get to the download screen
4. Launch Odin that comes with the autoroot package
5. Plug my phone into the USB and wait for Odin to add it.
6. Select the autoroot md5 file from the folder and begin the flashing process
7. Hope for the best and that my phone is still functional when it auto reboots.
After this i should check with Root Checker weather its properly installed or not. If it is, and i see the SuperSU application i continue to installing the custom recovery ( through some research i found out that TWRP is the best choice for me). Installing the custom recovery should be as easy as auto rooting the device. I should download the files from an official website, and flash them using the same process i did for AutoRoot.
After that its mod heaven. With my understanding so far, TWRP lets me install custom roms, and other things i might need.
This is what i plan on doing as soon as im done with a little more research. If anyone has any tips, corrections or general information on what to expect or do please share.
Many thanks to every contributor on this thread.
Click to expand...
Click to collapse
Flashing CF autoroot will simplify rooting, again, just make sure you have the correct autoroot for your specific model number and firmware, flashing the wrong one can softbrick or hardbrick your device, this would require flashing stock firmware via Odin to repair if softbricked and more serious methods to restore if hardbricked. There isn't much difference in effect with the different rooting methods. They all get the job done about equally.
Just make sure that you verify that your bootloader is in fact unlocked BEFORE you flash TWRP. As stated earlier, if it is locked, it will certainly cause issues and you'll have to restore stock recovery and/or stock firmware.
As long as your bootloader is unlocked then your outlined plan should be good to go.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Flashing CF autoroot will simplify rooting, afain, just make sure you have the correct autoroot for your specific model number and firmware, flashing the wrong one can softbrick or hardbrick your device, this would require flashing stock firmware via Odin to repair if softbricked and more serious methods to restore if hardbricked. There isn't much difference in effect with the different rooting methods. They all get the job done about equally.
Just make sure that you verify that your bootloader is in fact unlocked BEFORE you flash TWRP. As stated earlier, if it is locked, it will certainly cause issues and you'll have to restore stock recovery and/or stock firmware.
As long as you're bootloader is unlocked then your outlined plan should be good to go.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Well, looks like i messed up somehow. I was fiddling around the recovery mode and Odin mode. Those were the only two screens i could view besides normal booting, so i was looking for any info.
Recovery Mode https://ibb.co/hotYZ5
Odin mode 1 https://ibb.co/nFfVE5
Once on the recovery mode, i selected "reboot to bootloader" hoping to find info if its locked or not. I got redirected to this screen
Odin Mode 2 https://ibb.co/kqhtZ5
And then i did what i think is the dumbest thing this year....i removed the batery and now when i try to turn on my phone -
Blocked https://ibb.co/kkOd1k
Please tell me i did not brick my phone without even trying to root it first. My understanding is that i accidentally wiped the current OS (softbrick?) and now i have to flash a new one and then continue with what i had planned. Or is this a small problem that can be fixed easier? Or a more serious one ? Good news tho maybe, i think that the bootloader is unlocked ?
Thank you @Droidriven for your info so far, you have been extremely helpful.
*EDIT* - Pictures didnt link correctly.
luan96 said:
Well, looks like i messed up somehow. I was fiddling around the recovery mode and Odin mode. Those were the only two screens i could view besides normal booting, so i was looking for any info.
Recovery Mode https://ibb.co/hotYZ5
Odin mode 1 https://ibb.co/nFfVE5
Once on the recovery mode, i selected "reboot to bootloader" hoping to find info if its locked or not. I got redirected to this screen
Odin Mode 2 https://ibb.co/kqhtZ5
And then i did what i think is the dumbest thing this year....i removed the batery and now when i try to turn on my phone -
Blocked https://ibb.co/kkOd1k
Please tell me i did not brick my phone without even trying to root it first. My understanding is that i accidentally wiped the current OS (softbrick?) and now i have to flash a new one and then continue with what i had planned. Or is this a small problem that can be fixed easier? Or a more serious one ? Good news tho maybe, i think that the bootloader is unlocked ?
Thank you @Droidriven for your info so far, you have been extremely helpful.
*EDIT* - Pictures didnt link correctly.
Click to expand...
Click to collapse
It looks to me like they attempted to root the device but didn't do it correctly.
FRP can be a pain to deal with. Some can be bypassed easily, those that have trouble bypassing must sign in with the original owner's original Gmail and password used to activate the device.
The method of bypassing FRP varies from device to device.
Did you factory reset in recovery? If so, that's why you FRP blocked you.
If you have stock recovery then you should not have been able to wipe out the OS using stock recovery, typically, only custom recovery can do that, unless you did something accidentally that somehow corrupted/wiped your OS.
If the OS is gone, you'll have to flash your stock firmware via Odin and start over from the beginning.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
It looks to me like they attempted to root the device but didn't do it correctly.
FRP can be a pain to deal with. Some can be bypassed easily, those that have trouble bypassing must sign in with the original owner's original Gmail and password used to activate the device.
The method of bypassing FRP varies from device to device.
Did you factory reset in recovery? If so, that's why you FRP blocked you.
If you have stock recovery then you should not have been able to wipe out the OS using stock recovery, typically, only custom recovery can do that, unless you did something accidentally that somehow corrupted/wiped your OS.
If the OS is gone, you'll have to flash your stock firmware via Odin and start over from the beginning.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Thank you. At least its not just a paperweight. I'm installing new software on it with Kiesk 3 right now. Hope that works so i can do the rooting and TWRP install soon. I pressed "reboot to bootlader" to try and find out if its locked or not, but then it got me in download mode (without having to press up volume to contionue). After i turned off my phone by removing the battery, the OS was gone.
luan96 said:
Thank you. At least its not just a paperweight. I'm installing new software on it with Kiesk 3 right now. Hope that works so i can do the rooting and TWRP install soon. I pressed "reboot to bootlader" to try and find out if its locked or not, but then it got me in download mode (without having to press up volume to contionue). After i turned off my phone by removing the battery, the OS was gone.
Click to expand...
Click to collapse
Did you get this restored with Kies?
Droidriven said:
Did you get this restored with Kies?
Click to expand...
Click to collapse
Yes, i did. Worked like a charm, and even got the new 6.0.1 android on it. Also installed TWRP, and just finished installing Xposed Framework, now waiting for it to boot up ( i hear it takes some time). Seems all well so far. If any problems pop out ill be sure to post about it. Also thinking about making a new thread just to help newbies like me who really just want to remove some bloatware, and install some nice modules and not heavily mod the phone. You have been very helpful during this process. Many thanks to you ^-^ .
luan96 said:
Yes, i did. Worked like a charm, and even got the new 6.0.1 android on it. Also installed TWRP, and just finished installing Xposed Framework, now waiting for it to boot up ( i hear it takes some time). Seems all well so far. If any problems pop out ill be sure to post about it. Also thinking about making a new thread just to help newbies like me who really just want to remove some bloatware, and install some nice modules and not heavily mod the phone. You have been very helpful during this process. Many thanks to you ^-^ .
Click to expand...
Click to collapse
If you have issues with Xposed causing a bootloop, you can flash the Xposed uninstaller zip in TWRP to remove it, then troubleshoot why it bootlooped and try again.
Are you using the Touch wiz marshmallow Xposed framework?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE