Hello. i am new to XDA so please let me know if iv done anything wrong.
My problem is i rooted my galaxy tab 10.1 with starburst ROM. starburst came with android 3.1. I noticed that when zooming in on web pages made my screen rotate so i thought i would check for updates. There was an update for bugs and stability wich was about 3.2mb in size. I think i may have chosen japan instead of U.S, woops. Well anyway when my tab restarted it came up with the first samsung logo, the one that says, samsung galay tab 10.1, under that it had a progress bar wich got to 14% and then stoped. Every time i turn on my tab it gets to the first samsung logo then the screen goes blank, and does not do anything. iv tried going to recovery but it says updating application and thats it, it reboots again, i cannot factory reset. Any help is GREATLY appreciated.
The update was intended for unrooted tablets, since yours was rooted and had a custom rom installed, it could have mixed the files and kept it from booting. Can you access fastboot?
Sent from my XT862 using Tapatalk
Related
Ok so I have tried on another thread that kind of went dry mainly cause I was MIA....but now I am back and have done some more reading up and think it is safe to say rooting and trying customer ROM's is not for me...lol I pretty much messed up a new Galaxy Tab 2 7' brand new only after a few weeks trying to root it. I had another thread link below:
http://forum.xda-developers.com/showthread.php?t=1834368&page=2
But I did not get anything to work right. At this point I am really just looking to get the tablet working. I don't really care what firmware rooted or unrooted...i just want to be able to use it....do some more research and and maybe join the rooting community again when I get a Galaxy S3.
I'd appreciate any help. I am pretty stuck right now!
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
bark777 said:
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
Click to expand...
Click to collapse
Worked like a charm....you made it simple! Thanks!
Continous boot loop on tab 2 p3113
My problems are kind of different from all the others I have read. Yes it is similar that it boot loops. But mine freezes at different areas in boot mode. This is driving me crazy and I am spending way too much time and effort trying to fix it. Hopefully you can help.
I don't really know for sure if the android os was 4.1.1 or 4.1.2 or some other rom but it did state in download mode that it was original and not custom rom.
I received this tab from ebay and it is new never used, but somehow whoever had it probably tried to flash it and now I received it with a continuous loop. They stated that it stuck in SAMSUNG logo. I found it true but it also stuck other places as well. I did do a reset first before I attempted to flash it.
I did the Odin flashing.I found the 4.2.2 xar file HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 and did according to instructions. But that didn't work. It did boot into android but it didn't stay there very long and rebooted itself. I couldn't stay more than 20-30 seconds and it would reboot itself or freeze at various places in android. I also hard reset it. Still same thing. It would also freeze on the first samsung logo tab 2 screen and also at the blue circle with samsung logo. It was different every time. I would have to hold down the on button until it rebooted. It also stalls or freezes during Android upgrading... Optimizing app at various number stages sometimes it goes thru that and then to the next phase of installing apps then it freezes again. I cannot get it to work if I try to upgrade via wireless upgrade to samsung. it will freeze even before it downloads the upgrade file.
I then flashed back to the original xar file P3113UECLK7_P3113XACCLK7_XAC which is 4.1.1 That worked a little better, but it freezes and also the sound chatters when it freezes on bootup you know, when the samsung sound comes on then the blue circle.
Finally I tried to recover or flash from the recovery mode using the upgrade from a sdcard. using the original 4.1.1 xar file. It hewlped a little but still doing the continuous boot loop at different stages but it gets to the Android is upgrading... more often. It freezes always now.
So I don't know what else to do. You mentioned a CMOC10-Kernel to load, how does one go about doing that and what are the steps.
Thanks in return if you can suggest things.
Wayne
Hi everybody, my beloved P6800 started a couple of days ago to exhibit a strange behavior : after a full battery discharge (my bad), it remained stuck on the Samsung logo (not bootloop), et recovery was no longer available.
Only OS Download mode works, i've tried stock Samsung ROMS + recovery, Odin tells me everything works fine, but i'm unable to access recovery again, and whatever the recovery/rom I flash, the same symptoms happen.
I've heard of defective RAM on some 7.7 Tabs, forcing users to repartition excluding bad chips, but without recovery access, I'm quite blind
Has anybody encountered such behavior on a 7.7 ?
Thanks in advance and have a nice day !
sebguilbaud said:
Hi everybody, my beloved P6800 started a couple of days ago to exhibit a strange behavior : after a full battery discharge (my bad), it remained stuck on the Samsung logo (not bootloop), et recovery was no longer available.
Only OS Download mode works, i've tried stock Samsung ROMS + recovery, Odin tells me everything works fine, but i'm unable to access recovery again, and whatever the recovery/rom I flash, the same symptoms happen.
I've heard of defective RAM on some 7.7 Tabs, forcing users to repartition excluding bad chips, but without recovery access, I'm quite blind
Has anybody encountered such behavior on a 7.7 ?
Thanks in advance and have a nice day !
Click to expand...
Click to collapse
Hello!
I have same problem with my tab. When I try charging it shows battery with "wait" sign and no progress. Is it the same for you? Have you found a fix?
I have the Galaxy Tab 2 7.0 with CWM and stock rooted. I can get into CWM, but attempting recovery only fails: "failed to recover data" and it's stuck in an infinite load cycle. It shows the Samsung Galaxy Tab 2 7.0 Screen, then the Samsung splash screen indefinitely.
I was deleting what I thought were some useless apps with root uninstaller, rebooted and this happened.
I need a 5 year old's walk through for how to fix this. I'm pulling my hair out.
TheBulla said:
I have the Galaxy Tab 2 7.0 with CWM and stock rooted. I can get into CWM, but attempting recovery only fails: "failed to recover data" and it's stuck in an infinite load cycle. It shows the Samsung Galaxy Tab 2 7.0 Screen, then the Samsung splash screen indefinitely.
I was deleting what I thought were some useless apps with root uninstaller, rebooted and this happened.
I need a 5 year old's walk through for how to fix this. I'm pulling my hair out.
Click to expand...
Click to collapse
I think you soft brick your tab you can solve this problem by reflashing stock ROM but you will lose your data and apps:fingers-crossed::fingers-crossed::fingers-crossed::good:
Mohdsultan said:
I think you soft brick your tab you can solve this problem by reflashing stock ROM but you will lose your data and apps:fingers-crossed::fingers-crossed::fingers-crossed::good:
Click to expand...
Click to collapse
I was looking around for a stock rom, couldn't find one. Ended up using Pure Bean HD2 and it worked flawlessly and my tablet is up and running again.
Thanks anyways
Deleted...
A few weeks ago I installed Resurrection Remix on my Samsung Galaxy Note 2 (SGH-T889) following the instructions of this site:
teamandroid[dot]com/2016/03/08/update-tmobile-galaxy-note-2-t889-android-601-resurrection-remix-marshmallow-custom-rom/2/
Everything worked great for two weeks, my phone had better battery life, had the new OS, even played Pokemon Go (which it wasn't supposed to be able to do). However, yesterday it crashed when I was surfing Chrome on IGN's mobile website, and ever since has been stuck in boot loop. It boots up, optimizes # of # apps, and reboots. I can't stop it.
The thing is, since it's this way, I'm not sure how to get it back to flash it or anything. The recovery mode seems like it's back to the Odin crap again instead of the CWM recovery mode, and I can't download/install stuff on it in the current state, etc.
It's an old phone so I suppose I could go get a new one but meh. I love my Note 2. Never had a problem till now. Any ideas? Thanks!
OP resolved here:
http://forum.xda-developers.com/note-2-tmobile/help/help-possibly-bricked-sgh-t889-samsung-t3420658
Thread closed.
Good day. everyone. My Tab ( Samsung Galaxy Tab 3 7.0 [SM-T210 ] ) have been frozen in the logo after i restart it by holding the power button when it started to freeze after I connected it to the internet one day. After that it still stuck in the samsung logo so I decided to drain the battery then charge it again, and the screen shows a loading battery and still stuck in there. I researched online about how to fix it and tried to flash a tar.md5 file ( I knew it was a firmware or a kitkat update for my tab ) and says complete write something, then i found a video online to use twrp to flash the kitkat update. So I flash it, ended successfully and ended up stuck again in the same situation but cannot go to download mode anymore, tried to search online about this, found nothing the same situation I have. My question is, if my tab is hard brick or just frozen, and how can it be fixed.
Sorry for my bad english and for being noob about this topic. Thank you.