DISCLAIMER NOTE: I AND XDA IS NOT TO BE HELD RESPONSIBLE FOR ANY DAMAGES THAT YOUR PHONE MIGHT INCUR DURING THIS PROCESS, I HAVE TESTED IT IN MY BEST KNOWLEDGE TO WORK FOR OUR DEVICE BUT JUST TO BE SURE, PLEASE PERFORM ALL NECESSARY BACKUPS FOR THE PHONE TO PREVENT ANY DATA LOSS, IF YOU HAVE THE NEED TO DISAGREE AND/OR FAIL TO COMPLY JUST DONT FLASH IT AND GET ON WITH YOUR LIVES
Click to expand...
Click to collapse
PLEASE RESPECT MY WORK, DO NOT UPLOAD THIS TO OTHER WEBSITES, P2P, FTP AND OTHER MEANS OF FILE TRANSFER WITHOUT MY CONSENT, ALSO IF U WANT TO INCLUDE THIS IN YOUR WORK/ DEVELOPMENT, OR IF YOU BASE YOUR WORK IN ANY OF MY FILES THAT IS CONTAINED WITHIN THE DATA PLEASE CREDIT ME AND LINK THE FILES HERE IF EVER YOU NEED TO POST IT IN YOUR BLOG/WEBSITE, IF YOU FEEL YOU ARE NOT SATISFIED WITH MY WORK, CONSTRUCTIVE CRITICISMS IN A RESPECTFUL AND DECENT MANNER ARE ALWAYS WELCOME
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------
THIS IS A MOD TO ENABLE BOOTANIMATION.ZIP FOR STOCK ROMS MMKAY?
PRESS THANKS AND SAVE THE WORLD --------------------------------------------------------------------------------------------------------------------------------------
PREREQUISITES:
1. A Samsung Galaxy Y (Duh!)
2. Recovery Mode (Stock or CWM it does'nt matter)
3. Basic Knowledge in flashing updater scripts (dont worry i have a guide below to help people out)
5. Lastly, a good working brain
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------
[HOW IT WORKS FOR THE MOD]
For those using CWM Kernels (Savie's, White's, Merruk's above 1.8)
1. ENTER CWM RECOVERY BY HOLDING VOLUME UP+CENTER KEY+POWER
2. GO TO MOUNTS AND STORAGE AND SELECT MOUNT SYSTEM
3. SELECT STOCKBOOTENABLER-deathnotice01.zip FROM SD CARD (NO NEED FOR DATA WIPE/CACHE WIPE)
4. AND YOU ARE GOOD TO GO
For Non-CWM Kernels (STOCK, Ironbuang, KURO, koneu, REPENCIS, IFRAN, TEMRA KERNELS)
1. When the phone is off press and hold VOLUME UP+CENTER KEY+POWER for 5 secs
2. from stock recovery select "update from SD card"
3. select "cwm_bla_bla.zip"
4. now your phone will run the CWM, go to "install zip from SD"
5. from there choose "choose zip from SDcard"
6. navigate through the folder where you have saved the "STOCKBOOTENABLER-deathnotice01.zip"
7. select "yes", wait till it finishes, then reboot system
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------
[IF SOMETHING GOES WRONG:]
1. DON'T PANIC!
- DON'T POST "OMG! YOU [$%^&] [%^&] [$%$##] HELP ME, ME PHONE NO WORKY, OH MAI" AND POST IN THE GENERAL, DEVELOPMENT, AND THEME
2. TRY TO READ THE WHOLE INSTRUCTIONS AGAIN, MAYBE YOU MISSED A STEP (REALLY) OR YOU DID NOT GET SOME OF THE INSTRUCTIONS CORRECTLY
3. NOTE SPECIFIC DETAILS ON WHAT YOU DID BEFORE FLASHING
4. IF IT STILL DOES NOT WORK AND YOU FEEL YOU DID EVERYTHING CORRECTLY,
POST HERE ON THIS THREAD NOT THE Q&A THREAD OR ANY OTHER THREAD SO THAT PEOPLE WILL REPLY AND EXPEDITE YOUR ISSUE RIGHT AWAY
(IF SOLVED DO'NT PROCEED TO STEP 5)
5.IF ALL POSSIBLE SOLUTIONS FAIL,
CALL CHUCK NORRIS , OR JUST REFLASH THE ROM AND START OVER
Click to expand...
Click to collapse
[Troubleshooting]
---No reports since updated 9/22/12
Click to expand...
Click to collapse
Credits:
CM10 bootanimation by CM Team
First blood sir i would like to ask sir if it is ok.to use this one while im using the custom kernel?is their any conflict?
Sent from my GT-S5360 using xda premium
are we really need to put new build.prop there?
including
ro.build.date=Mon 16 Jan 19:22:01 KST 2011
lol
I am on March 7th
can't go back to bloody January
---------- Post added at 05:08 PM ---------- Previous post was at 04:58 PM ----------
delete_recursive("/system/etc/init.d");
ui_print("INITIALIZING SCRIPT...");
what if someone put a tweak in init.d ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i've seen the zip file,each folder has 2 copies,y? and is that build.prop necessary? pls also specify on what rom hav u tested it
I though the most important part in this mod are two files in /system/bin and bootanimation.zip. it seems safe to remove anything else from the original file.
hi man... why ur updater script deleted init.d folder???
if any rom using this with init.d modif .. mybe can be lost of data in init.d folder
repencis said:
hi man... why ur updater script deleted init.d folder???
if any rom using this with init.d modif .. mybe can be lost of data in init.d folder
Click to expand...
Click to collapse
well...we can manually push the file to the system or make another script for the installation. repencis has cool cm7 bootanimation. it will be nice if we can enable it
seems that his script is for Hybrid rom.. sorry if this is a noob question but wats the need of these codes and build.prop
set_perm_recursive(0, 0, 0777, 0777, "/system/etc/init.d");
set_perm(0, 0, 0777, "/system/etc/init.d/00banner");
set_perm(0, 0, 0777, "/system/etc/init.d/01sysctl");
set_perm(0, 0, 0777, "/system/etc/init.d/02firstboot");
set_perm(0, 0, 0777, "/system/etc/init.d/06zipalign");
set_perm(0, 0, 0777, "/system/etc/init.d/04apps2sd");
set_perm(0, 0, 0777, "/system/etc/init.d/99complete");
[UPDATED!!]
Changelog
9/22/12
-removed useless build.prop from previous version
-updated script (no more init.d deletion)
-no more bootloopzzzz
hi brother, i didnt know about your updating D: i was typing you in another threads
i will try this one but if it doesnt work, it dont matter, you could give me a hand?
Crackion said:
hi brother, i didnt know about your updating D: i was typing you in another threads
i will try this one but if it doesnt work, it dont matter, you could give me a hand?
Click to expand...
Click to collapse
sure,
i'm 90% sure that my new update will work in all stock roms,
i tested it 3 times,
and had like 12 builds for it,
and the last build was the perfect working one,
Is there any way i can return back to stock animation aftrr flashing this zip.???
Sent from my GT-S5360 using xda premium
menewtoroot said:
Is there any way i can return back to stock animation aftrr flashing this zip.???
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
you can try and revert files from stock and manually pushing them to the system
deathnotice01 said:
you can try and revert files from stock and manually pushing them to the system
Click to expand...
Click to collapse
Whats the use of mount and system..
In step 3.!!
Sent from my GT-S5360 using xda premium
Is it necessary to have a deodexed stock ROM? or will work on non-deodexed as well?
Its works on rom which have boot animation locked
Sent From My GT-S5830 Using Tapatalk 2
I dunno whats happening though....
I flash thru CWM and reboot.
it gives bootanim, lags a bit and boot anim goes on FOREVER
i mean if i press the lock button, the screen turns off. and still it doesnt end.
once i tried it with auto rotation on.
the screen auto rotates i can see a lil part past the boot anim (lol)
plz explain this
Nachiket.Namjoshi said:
I dunno whats happening though....
I flash thru CWM and reboot.
it gives bootanim, lags a bit and boot anim goes on FOREVER
i mean if i press the lock button, the screen turns off. and still it doesnt end.
once i tried it with auto rotation on.
the screen auto rotates i can see a lil part past the boot anim (lol)
plz explain this
Click to expand...
Click to collapse
Iv used this loads of times without problem
remember to mount system and its for stock based roms only
Restore your nandriod backup if you have problems
you can also try using aroma file manager (Google it) and flash it in cwm with system mounted and then goto
system/media and delete bootanimation.zip
marcussmith2626 said:
Iv used this loads of times without problem
remember to mount system and its for stock based roms only
Restore your nandriod backup if you have problems
you can also try using aroma file manager (Google it) and flash it in cwm with system mounted and then goto
system/media and delete bootanimation.zip
Click to expand...
Click to collapse
Loll. That's not a problem... I wanna get that boot anim. That's the problem.
Sent from my GT-S5360 using xda app-developers app
Related
Guys I tried this without any success
Vibrant ROM = Bionix
Galaxy S 4G ROM = KD1 Deodexed (CWM Ready)
1. I decompiled, swapped many lines in Environment.smali (only file where I saw differences)
2. Re-compiled them into new classes.dex files
3. Removed old classes.dex file from each of the four files (services.jar, framework.jar, settings.apk and android_policy.jar)
Note on step 3 - I don't know why I had to do this for the other 3 files if the Environment.smali in framework.jar was the only file that apparently needed modification...but I moved on
4. Moved over (copy and paste) all the wifi files, modem & kernel
5. Finally, compiled the updated Vibrant ROM into a new ZIP file
6. Used Amend2Edify to sign the zip
Now, when I tried to flash this, it hangs at "Mounting mount point" for a minute or two, then it goes through a flash process...it eventually finishes with no errors, I clear cache and reboot the phone....the phone loops at the "Samsung Galaxy S 4G" screen (initial screen when powering on device).........and it sits there forever, never boots into anything.
Now when I was making edits in the Environment.smali, there were some entries for the sd card with subdirectory attached (otg_disk)...I changed from /mnt/sdcard/otg_disk to /mnt/sd/external_sd/otg_disk
I followed through each step carefully, I even downloaded an app that scans files within a provided directory for certain text, I scanned all the other files besides framework.jar for "INTERNAL" and it did not find anything pertaining to INTERNAL_STORAGE.....
Here is a screenshot of some more "INTERNAL" stuff I found..particularly in MediaScanner.smali
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Would we be changing language such as this also?
i hope Krylon,DrHonk, or robbbbit can chime in. Which version of Bionix you trying to port?
Beefvvl said:
i hope Krylon,DrHonk, or robbbbit can chime in. Which version of Bionix you trying to port?
Click to expand...
Click to collapse
It is the 1.3.1 Touchwiz version..
mikeDCMDVA said:
Guys I tried this without any success
Vibrant ROM = Bionix
Galaxy S 4G ROM = KD1 Deodexed (CWM Ready)
1. I decompiled, swapped many lines in Environment.smali (only file where I saw differences)
2. Re-compiled them into new classes.dex files
3. Removed old classes.dex file from each of the four files (services.jar, framework.jar, settings.apk and android_policy.jar)
Note on step 3 - I don't know why I had to do this for the other 3 files if the Environment.smali in framework.jar was the only file that apparently needed modification...but I moved on
4. Moved over (copy and paste) all the wifi files, modem & kernel
5. Finally, compiled the updated Vibrant ROM into a new ZIP file
6. Used Amend2Edify to sign the zip
Now, when I tried to flash this, it hangs at "Mounting mount point" for a minute or two, then it goes through a flash process...it eventually finishes with no errors, I clear cache and reboot the phone....the phone loops at the "Samsung Galaxy S 4G" screen (initial screen when powering on device).........and it sits there forever, never boots into anything.
Now when I was making edits in the Environment.smali, there were some entries for the sd card with subdirectory attached (otg_disk)...I changed from /mnt/sdcard/otg_disk to /mnt/sd/external_sd/otg_disk
I followed through each step carefully, I even downloaded an app that scans files within a provided directory for certain text, I scanned all the other files besides framework.jar for "INTERNAL" and it did not find anything pertaining to INTERNAL_STORAGE.....
Click to expand...
Click to collapse
the .smali given.in the op completed the framework.jar classes.dex. if u dont see any differences in the other two .jar files, great! changes have to be made in settings. apk, tho... our you wont be able to mount.
Sent from my SGH-T959V using XDA Premium App
mikeDCMDVA said:
It is the 1.3.1 Touchwiz version..
Click to expand...
Click to collapse
People actually like TW?
robbbbit said:
the .smali given.in the op completed the framework.jar classes.dex. if u dont see any differences in the other two .jar files, great! changes have to be made in settings. apk, tho... our you wont be able to mount.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
What changes in Settings.apk? I searched that for the INTERNAL string...I did not find anything partaining to INTERNAL_STORAGE like in the OP, but I'll screenshot what the search application found below for Settings.apk:
How do you think this should be handled?
mikeDCMDVA said:
What changes in Settings.apk? I searched that for the INTERNAL string...I did not find anything partaining to INTERNAL_STORAGE like in the OP, but I'll screenshot what the search application found below for Settings.apk:
How do you think this should be handled?
Click to expand...
Click to collapse
switch to external. everything.
Sent from my SGH-T959V using XDA Premium App
Damn.... Getting close, mikes way further than i got,
sent from my not so stock SGS4G
dude id test flash after that, btw... after you boot up (hopefully...) check your memory in settings. see if everything adds up.
Sent from my SGH-T959V using XDA Premium App
if it does work after that will you be uploading to this site?
Of course. Just re-compiled everything and swapping some necessary files, then I will sign the zip and try again. I really hope this works guys.....
Me too bro im starting to sweat!!! Ur getting so close dude!!! Thanks for stickin with it!!!!!!!!!!!!
mikeDCMDVA said:
Of course. Just re-compiled everything and swapping some necessary files, then I will sign the zip and try again. I really hope this works guys.....
Click to expand...
Click to collapse
hey, just to make, "extra-sure" you're up do date on cwm and able to restore, right?
Sent from my SGH-T959V using XDA Premium App
Yeah bro, I been up to date on CWM for sure. Hmm, I have used CWM to restore on this phone before...haven't tried on the CWM final yet..we'll see
Well, after the additional edits, still getting frozen at the initial "Galaxy S 4G" screen.
I don't know why, but it really hangs for awhile at "Mounting mount points..." during the beginning of the flash in CWM. Could this be a mount issue still??
Ugh...glad I did a nandroid backup this time..
Also, when I pop the battery and boot back into Android Recovery, I get a mounting issue:
Install default apk-files, please wait
E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
E:copy_data_default_apk:Can't mount DATA:
your storage is not prepared yet, please use UI menu for format and reboot actions
Cannot restore either..
" E:format_volume failed to unmount "/system" "
SOAB!!
***EDIT***
Actually just turned the phone completely off, and then booted into CWM again... /system is no longer mounted....so it is restoring now
mikeDCMDVA said:
Here is a screenshot of some more "INTERNAL" stuff I found..particularly in MediaScanner.smali
Would we be changing language such as this also?
Click to expand...
Click to collapse
I honestly don't remember if I change that or not .. lol .. I think I did.
mikeDCMDVA said:
Cannot restore either..
" E:format_volume failed to unmount "/system" "
SOAB!!
***EDIT***
Actually just turned the phone completely off, and then booted into CWM again... /system is no longer mounted....so it is restoring now
Click to expand...
Click to collapse
You're not using kernel and modem from the original Bionix right?
Well, I tried flashing again and then it boots up, but no picture on screen, keeps vibrating FC's every few seconds...and the key lights are on...going back to restore..
.
CWM Recovery for GT-I9003 by Skin1980:
This is the full-functional CWM recovery ported by me for the Samsung GT-I9003. Here some screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One thing to know is that in this version External SD is called SDCard. This because SDCard is used by CWM as backup support. For the same reason also the USB Storage mounted under "Mount and Storage" menù is related to external SD.
How to install:
Install this CWM is very easy, just flash the .tar file with odin ( put the .tar in the PDA field).
You can also use heimdall under linux. Just extract the normalboot.img file and do:
Code:
heimdall flash --normal-boot normalboot.img
IMPORTANT: Read this topic on Edify scripting used on update.zip. The partitions must be mounted before copying files:
Code:
run_program("/sbin/busybox", "mount", "-t", "auto", "/dev/block/stl9", "/system");
Flashing Zip Files:
If in the updater-script there isn't the "mount /system" option you must - before apply the zip - mount manually /system under "Mount and Storage" menù and then flash your zip.
Features:
- Added EXT4 filesystem support for the kernel ( now you can convert to ext4 to improve performanca);
- CWM with double RFS / EXT4 filesystem support;
- Busybox;
- Juwe11 RamScript from http://forum.xda-developers.com/showthread.php?t=1111145 ;
THANKS: I have to say, and all of us have to say a big Thanks to the super Devs that helped me in this port: Chris41g, DRockstar (this CWM is heavily based on it's project), Roddick and all the other devs on #epic in irc.fossnet.info. These are WONDERFUL GUYS, always ready to help you.
Thanks also to koush that made the Clockworkmod Recovery.
IMPORTANT: The recovery isn’t universal, all firmware is different so don’t flash the recovery for a firmware different from your!!!! Since i don’t have all firmware on my PC upload your normalboot.img to me with the name of your firmware so i can build the CWM.
The normalboot.img can be found in the PDA tar of your firmware (if you have it on the PC). Alternatively you can dump it from phone with this command:
Code:
dd if=/dev/block/bml7 of=/sdcard/normalboot.img
LINK:
http://www.megaupload.com/?d=0BFPGS12 GT-I9003_PDA-DDKB2.tar
http://www.megaupload.com/?d=5VB0U4IR GT-I9003_PDA-DXKB2.tar
http://www.megaupload.com/?d=8SUXXIYA GT-I9003_PDA-LUBKB1.tar
http://www.megaupload.com/?d=A9Y5Y9FB GT-I9003_PDA-XXKB1.tar
http://www.megaupload.com/?d=BQ2P35CY GT-I9003_PDA-ZHKC1.tar
http://www.megaupload.com/?d=J45I2CH1 GT-I9003_PDA-XXKC1.tar
http://www.megaupload.com/?d=JRJXED7S GT-I9003_PDA-ZCKC1.tar
http://www.megaupload.com/?d=OY7ZTA8L GT-I9003_PDA-XXKB3.tar
http://www.megaupload.com/?d=SNSPPHTW GT-I9003_PDA-JPKE1.tar
http://www.megaupload.com/?d=SUK5ROFE GT-I9003_PDA-DXKE1.tar
http://www.megaupload.com/?d=VKCIF6A0 GT-I9003_PDA-XWKB1.tar
http://www.megaupload.com/?d=Q62RT5Q0 GT-I9003_PDA-DDKF1.TAR
http://www.megaupload.com/?d=R8OC916M GT-I9003_PDA-XXKPE.tar
http://www.megaupload.com/?d=B7JCW9SV GT-I9003_PDA-JVKD1.tar
http://www.megaupload.com/?d=ZIF7XUOB GT-I9003_PDA-XXKPH.tar ---> to root use THIS
FOR JPKP5 go to CF-ROOT thread HERE
FOR XXKPM go to CF-ROOT thread HERE
If you like my work and want support it with a donation just press on the "DONATE" button under my Nick
Under this post you find a THANKS button.... Just press it if you like my works...!!!!
Skin u did it man.the person to dev cwm for i9003.you r the best man.congrats.
Sent from my GT-I9003 using XDA App
rdr_m said:
Skin u did it man.the person to dev cwm for i9003.you r the best man.congrats.
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
Thanks a lot... i will be more happy when the nandroid backup will work correctly
Do i need to sign update.zip for this?? i wana test this!! CFW PLS!!
CONGRATS!! THAT WAS QUICK!
monalac said:
Do i need to sign update.zip for this?? i wana test this!! CFW PLS!!
CONGRATS!! THAT WAS QUICK!
Click to expand...
Click to collapse
Just copy your zip on sd the choose to apply any zip from SD
hey, this is not going ahead of Samsung Galaxy GT-I9003 screen and keeps on looping.. what to do? i have 2.3.4 is this only for 2.2.1??
Hey Skin! I congratulate for a job well done. Would you please elaborate the problem with nandroid and USB mass storage mounting for us noobs? What does it do and why is it important. Nevertheless, I bow before you master! Great Job!
monalac said:
hey, this is not going ahead of Samsung Galaxy GT-I9003 screen and keeps on looping.. what to do? i have 2.3.4 is this only for 2.2.1??
Click to expand...
Click to collapse
as i wrote it's only for xxkb3 FW... if you have another one please upload normalboot.img to me..... another thing... you must also post the output of the mounts command (open adb shell and do "mounts")
jcbalunsat said:
Hey Skin! I congratulate for a job well done. Would you please elaborate the problem with nandroid and USB mass storage mounting for us noobs? What does it do and why is it important. Nevertheless, I bow before you master! Great Job!
Click to expand...
Click to collapse
- Nandroid perform a full backup of the Rom so you can restore if you soft-brick your mobile;
- USM mount permit to mount your USB in mass storage mode while you are in recovery.
Skin1980 said:
as i wrote it's only for xxkb3 FW... if you have another one please upload normalboot.img to me..... another thing... you must also post the output of the mounts command (open adb shell and do "mounts")
Click to expand...
Click to collapse
Didnt read in excitement and in a hurry and just had a reflash to 2.3.4 KP9
monalac said:
Didnt read in excitement and in a hurry and just had a reflash to 2.3.4 KP9
Click to expand...
Click to collapse
just reflash normalboot.img with heimdall
command line:
Code:
heimdall flash --normal-boot normalboot.img
Hey skin, how do use CWM to flash a ROM? for example, XXKP9?
jcbalunsat said:
Hey skin, how do use CWM to flash a ROM? for example, XXKP9?
Click to expand...
Click to collapse
i think u cant flash whole roms with cwm,just update.zips
Awesome work man !!!
Now just 1 more thing ...tutorial to explain how it works/what each option is supposed to do etc ....
then i can try and post feedback/bugs
thanks a lot... you are hero!!
can you take this for "I9003JPKD1 " Arabic Frimware?
This should be a sticky.
Sent from my GT-I9003 using XDA App
Works great... dude... Now waiting for nandroid backup. But this alpha itself is of great help.
While using it, I faced minor problem, when I press home button for selecting option it jumps two steps inside as if pressing a hard button. I mean after entering the first option it enters the next menu also. But then after trying 3-5 times carefully, I get the option that I want to select. Just check if you have this problem. Anyways this is not a major issue for me as I can save my phone and it is alpha release so does not matter at all.
Your contributions will always be remembered, really appreciate this update.
Well done dude
Oh...finally you did it skin...!!!! I have a small doubt...I read on the net by searching alot...but still i am not understanding the difference between CWM & nandroid backup??? I know only that android backup means doing a backup of whole rom as an image...but what is exact meaning of CWM???? Is thete any relation between them?? Please can anybody explain...it will be helpful fot other also...!!!!
Nice work mannn!?!??!!!
Awesomeeeeee!?
Finally got these all loaded up, this will de-odex all of your /system/app and /system/framework folders.
MAKE SURE YOU PERFORM A NANDROID BACKUP BEFORE ATTEMPTING THIS, IF ANYTHING GOES WRONG, JUST RESTORE THE SYSTEM.IMG PART OF THE BACKUP AND TRY AGAIN. IF THIS SCREWS UP YOUR DEVICE I AM NOT RESPONSIBLE, NEITHER IS CHRISROTOLO. YOU TAKE ALL THE RISKS OF MODDING YOUR OWN DEVICE.
Ok, now that we have covered that, instructions.
DOWNLOAD
MD5 :: 32793691755CA374AD728FA3D385A3A0
thanks to M1m3R
The initial reboot will take a minute of two, do not worry, let it do its thing. If SHOULD stay on the SAMSUNG logo, if the boot animation keeps playing over and over something went wrong, and you will need to flash it again.
The files in the zip are 100% stock. If you wish to apply my theme then see the second post.
Please feel free to ask any questions, or hit me up on GTalk - [email protected].
If you wish to apply my theme for the WIFI only version, once loading up these files, go here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some of the images were borrowed from different themes around xda. The unlock circle was kanged from the 10.1 forums. I will get around to changing the soft key buttons as soon as I can get the battery mod working. Working on that now, will probably be a few days before I will be able to get it up and going however.
nice job, thanks for testing. Let the themes/tweaks begin!
I hope.
Oh yes. Sorry it took so long man! Fedex is a ***** this time of year. First day I haven't work 12+ hours in a month!
looks good, is that an official ICS lock ring mod or another custom one?
not bad, mine will be a few more days at least, but its coming.
question: any idea how to remove touchwiz page indicators? I removed them in app drawer by zeroing an .xml line, tried everything, think it may be more than an .xml
let me know if you need help with anything.
Mine will not have accurate battery mod in status bar. just tap on the systemui quickpanel pop up and theres how I check actual percentage. you putting in all the actual numbers over the .pngs, Ive dont that before, and having to add .xml is not easy.
Wow a rom and its themed perfectly! I have a question before I try to flash it using ADB. I installed sdk and kies and when I installed sdk I moved everything from my platform tools directory into my tools directory. I needed fastboot mode to root my nexus s. Do I have everything I need to use adb when installing this rom using adb? Any help would be greatly appreciated
Sent from my GT-P6210 using xda premium
And are the # signs mean hit enter? Thanks
Sent from my GT-P6210 using xda premium
mike216 said:
Wow a rom and its themed perfectly! I have a question before I try to flash it using ADB. I installed sdk and kies and when I installed sdk I moved everything from my platform tools directory into my tools directory. I needed fastboot mode to root my nexus s. Do I have everything I need to use adb when installing this rom using adb? Any help would be greatly appreciated
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
Yes as long as adb sees the device your fine. And the # signs are just symbols meaning you have SU access. After each command you press enter. Everytine you press enter it will repeat each step then follow it up a # sign, once you see the # sign type the next step.
Sent from my Insanity powered SGS2
Good point now that I think about it,it was a dumb question, thanks
BEST DAMN PHONE BECAUSE WE HAVE THE BEST DAMN DEVELOPERS!
I've changed the theme up some. Changed a few images, and fixed a few images that were white and you couldnt see, as well as volume sliders. The SystemUI is now a lilght black/grey same as chrisrotolo. As well as the unlock circle is now blue. Also added back the stock wifi indicator because the ICS would shift to the left. Once I figure out why ill add it back.
I will post up new screenshots today when I get home.
Thanks again to chrisrotolo for all the assistance with xml's, images and everything else!
It looks amazingly perfect! Going to try and install it this weekend, thanks
BEST DAMN PHONE BECAUSE WE HAVE THE BEST DAMN DEVELOPERS!
Has anyone actually gotten this to work. No matter what I do, I can't get this to work.
I also put together a flashable zip to install the system files and remove the .odex flies. The flash works but nothing actually happened.
I'm not sure how to proceed at this point.
Anyone have any luck with a working updater script for this device?
ptfdmedic said:
Anyone have any luck with a working updater script for this device?
Click to expand...
Click to collapse
Yes. My CWM Recoveries all use updater scripts (edify) to install. I've sent a message to the OP and will help him wrap this in a simple update.zip over the long weekend.
take care
Gary
yeah, I had similar issue with the P6200 deodex, had what I beleived to be all the right commands, flashed ok everytime, but didnt vhange everything.
Thank goodness we have people like garyd to help.
(i'll probably borrrow his .zip and use it for 3g version... IF he doesnt mind.)
chrisrotolo said:
yeah, I had similar issue with the P6200 deodex, had what I beleived to be all the right commands, flashed ok everytime, but didnt vhange everything.
Thank goodness we have people like garyd to help.
(i'll probably borrrow his .zip and use it for 3g version... IF he doesnt mind.)
Click to expand...
Click to collapse
This was my last attempt at creating the zip. I had a few versions that flashed all the way through without error but upon reboot nothing had actually changed.
This code errors out. I borrowed some from the 3G version. Wouldn't this be very similar to the Epic Touch 4G?
ui_print(Deodexed System);
show_progress(0.500000, 0);
ui_print("Mounting System");
mount("ext4", "EMMC", "/dev/block/mmcblk0p8", "/system");
ui_print("Cleaning up...");
delete("/system/app);
delete("/system/framework);
package_extract_dir("system", "/system");
unmount("/system");
ui_print("Done.");
show_progress(0.100000, 0);
Click to expand...
Click to collapse
ptfdmedic said:
This code errors out.
Click to expand...
Click to collapse
At which point does it error out?
You should add lines to fix permissions:
Code:
set_perm_recursive(0, 0, 0755, 0644, "/system/app");
set_perm_recursive(0, 0, 0755, 0644, "/system/framework");
(don't run this on all of /system, as stuff in /system/etc and /system/bin need different perms.) Are you having issues when running under the stock (3e) recovery or with my CWM Recovery port? (If you have issues with one, have you tried it with the other?)
Not sure which device you are working with, but the /system partition is different for different versions of the 7+. (The P6210 uses mmcblk0p8)
Finally, you might consider forcing the dalvik cache to rebuild when doing that:
Code:
#only for GTP6210
unmount("/data");
mount("ext4", "EMMC", "/dev/block/mmcblk0p9", "/data");
delete_recursive("/data/dalvik-cache");
unmount("/data");
Take care
Gary
(warning: all the above code was written purely from memory, so it might contain typos... )
garyd9 said:
At which point does it error out?
You should add lines to fix permissions:
Code:
set_perm_recursive(0, 0, 0755, 0644, "/system/app");
set_perm_recursive(0, 0, 0755, 0644, "/system/framework");
(don't run this on all of /system, as stuff in /system/etc and /system/bin need different perms.) Are you having issues when running under the stock (3e) recovery or with my CWM Recovery port? (If you have issues with one, have you tried it with the other?)
Not sure which device you are working with, but the /system partition is different for different versions of the 7+. (The P6210 uses mmcblk0p8)
Finally, you might consider forcing the dalvik cache to rebuild when doing that:
Code:
#only for GTP6210
unmount("/data");
mount("ext4", "EMMC", "/dev/block/mmcblk0p9", "/data");
delete_recursive("/data/dalvik-cache");
unmount("/data");
Take care
Gary
(warning: all the above code was written purely from memory, so it might contain typos... )
Click to expand...
Click to collapse
Thanks Gary. I'll look into this again this weekend. I appreciate your help
It would be nice for a flashable zip file. I've tried and come up empty. And just for proof that I do have it on my tab let me upload a pic
Sent from my ICS'd themed Galaxy Tab 7+
Sent from my ICS'd themed Galaxy Tab 7+
antiochasylum said:
It would be nice for a flashable zip file. I've tried and come up empty. And just for proof that I do have it on my tab let me upload a pic
Click to expand...
Click to collapse
what are you replying to?
Hello, Everyone.
I am just sharing my UC-Kernel Boot Screens! Please hit thanks if you like them
Instructions on how to put on your phone at the bottom. Credits to some guy in zedge that uploaded this wallpaper, i just did minor photoshopping.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From akashsgpogi
First, you have to have UC-Kernel on your phone. Do not flash anything below if you are on different kernel.
UC-Kernel can be found here.
Read below on "how to have your own custom boot logo"
DooMLoRD said:
How to change bootlogo/bootscreen
Our kernel (v03 onwards) comes with its own bootlogo/bootscreen... but to enable that bootlogo/bootscreen u need to separately flash a file via ODIN...
This basically is based on what Skin1980 had posted to modify bootlogo...
[ how to enable loading custom bootlogo ]
first download modifier-XXKPQ-bootlogo.tar
check the md5hash of the file to ensure file integrity
reboot device into Download mode
connect to PC via USB cable
start ODIN
make sure that device is detected
click on PDA and select the file u downloaded
now click start
after flashing is successful the device will reboot
now flash our kernel!
[ how to have ur own custom bootlogo ]
this can be done ONLY after u flash the modifier
u need a 480x800 image and it has to be in JPEG format
the file should be called as logo.jpg and has to be saved in /mnt/.lfs/
thats it reboot device to see ur own logo
[ how to disable loading custom bootlogo ]
first download stock-XXKPQ-bootlogo.tar
check the md5hash of the file to ensure file integrity
reboot device into Download mode
connect to PC via USB cable
start ODIN
make sure that device is detected
click on PDA and select the file u downloaded
now click start
after flashing is successful the device will reboot
now custom bootlogo will be disabled!
[ download links ]
Modifier XXKPQ
MD5HASH: fd95a5097ec37911023b23df08f53fa4
Stock XXKPQ
MD5HASH: 0a2a8a45c4b44cbbf170e3b85ff748dd
[ troubleshooting ]
at first u may need to reboot 2 or 3 times to see our custom bootlogo
if even after flashing the modifier u are unable to see our custom bootlogo OR if u want to revert back to our bootlogo; then:
once device boots start RootExplorer
go to the folder /data/local/tmp/
delete the file uckernelbootlogo
reboot device
this will force the kernel to push our logo to /mnt/.lfs/
Click to expand...
Click to collapse
Tips:
1. its /mnt/.lfs/ not /mnt/.ifs/
2. You can use the move command in terminal emulator since .lfs is hidden
3. Save any .jpg to sdcard as "logo.jpg"
4. mv /sdcard/logo.jpg /mnt/.lfs/logo.jpg
5. Once logo.jpg is in .lfs, it seems it cannot be overwritten, you need to flash the modification again if you want to change boot screens.
Sir wheres the DL link..
nice work man
You can right click and save the pics above directly and use them as logo.jpg
STEP 1: Save the images and put them /mnt/.lfs/logo.jpg
STEP 2: Thanks inciongd for the awesome screens!!
superb buddy...
Added Reaper Themed Bootscreens in Tribute to DooM
inciongd said:
Added Reaper Themed Bootscreens in Tribute to DooM
Click to expand...
Click to collapse
Reaper creeps me out. Sticking to the grey droid. .
Nice work dude
pls add this also one to the op
i kept it simple
^^ Done man
@inciongd
sorry man i uploaded a png
this one is the jpg so pls reupload
http://i1223.photobucket.com/albums/dd504/Akash_Gupta/CM7/logo.jpg
No problem man
thanks, I picked the composite of the sgl screen and uc toon style reaper. using it on cm7 now
To change bootlogo again without flashing,
Delete the file /data/local/tmp/uckernelbootlogo
Reboot (a few times, till stock boot logo is pushed by kernel)
Then place the new boot logo.jpg to /mnt/.lfs/
Reboot
inciongd said:
Added Reaper Themed Bootscreens in Tribute to DooM
Click to expand...
Click to collapse
hahhahah...
thanks!
when I copy to there and it say no space!!! i have make it to 17kb also say no space pls help me
I impressed..
Nice Work)
leongwenjun said:
when I copy to there and it say no space!!! i have make it to 17kb also say no space pls help me
Click to expand...
Click to collapse
are you trying to do this on cm7 like me? if so, it's a bit of work to do it 'cause you have to flash other fw to do this and go back to cm7. if you're not, are you flashing the "extra" cfroot from the universal thread? if so, are you getting the image noise like you're supposed to?
---------- Post added at 10:19 PM ---------- Previous post was at 10:16 PM ----------
amit864 said:
To change bootlogo again without flashing,
Delete the file /data/local/tmp/uckernelbootlogo
Reboot (a few times, till stock boot logo is pushed by kernel)
Then place the new boot logo.jpg to /mnt/.lfs/
Reboot
Click to expand...
Click to collapse
this must only work on stock fw, since on cm7 all I see in that folder is immvibed.lck
leongwenjun said:
when I copy to there and it say no space!!! i have make it to 17kb also say no space pls help me
Click to expand...
Click to collapse
I have the xenoxmod rom 2.0 and it gives me the same error...
EDIT: i didn't flash the modifier first...
Sent from my GT-I9003 using XDA App
CWM ON EVERY BOOT WITH GPS WORKING
What Is This??
This is a mod to achieve ClockWorkMod Recovery on Every reboot/boot with a fully functioning GPS. So far this is the only method to have CWM On boot without breaking GPS.This methos uses IBMc PowerBoost 2.0.
Things you will need:
1. Jrummy16's BusyBox Installer (download on market)
2. Download PB-2dot0_final.zip and place on sdcard
3. Terminal Emulator (download on market)
INSTRUCTIONS:
Step 1. Reboot into CWM using Atrix Bootstrapper and
Step 2. flash PB-2dot0_final.zip and reboot
Step 3. Once rom loads up , uninstall AtrixBootstrapper or set permissions in SuperUser for it to "denied" (i would uninstall AtrixBootstrapper after quickly setting to deny,you wont need it)
Step 4. Download Jrummy16's Busybox Installer from market,open it,and click install. You want to install latest 1.19 Busybox over 1.17 that you probably have. looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 5. Open Terminal emulator and type the following one line at a time,hitting ENTER after each line is typed:
su
mount -o rw,remount /dev/block/mtdblock3 /system
chmod 755 /system/xbin/powerboost
powerboost
now you should see this:
Step 6. It will ask you if you want it to install Jrummy16's BusyBox Installer,just type N for "No" and hit enter as we already installed this.
Step 7. Now it will Prompt you to select a number. type in 5. "CWR On Every Boot"
Step 8. After "Installation Complete" only takes about 2 seconds, you will type 8 for a Reboot,and type Y for yes.
Step 8. Enjoy!
If you like my work,hit the thanks button,if not,hit the back button : P
If you plan on using this in your projects all i ask is for you to simply credit me in your OP.
CREDITS: BMc08GT (creator of the PowerBoost Script)
You are the man!
Thanks....cant hit the button on my mobile app but will when i get to my pc.
So terminal emulator, can that always be used to push adb commands?
Sent from my MB865 using XDA App
916x10 said:
You are the man!
Thanks....cant hit the button on my mobile app but will when i get to my pc.
So terminal emulator, can that always be used to push adb commands?
Sent from my MB865 using XDA App
Click to expand...
Click to collapse
yes and no, for apks i run adb from pc otherwise u run into problems.
Does this also fix the battery issue where it won't turn on or charge from 0%?
Sent from my MB865 on lfaber06's Supercharged ROM V 5, Update 2
You're my hero today. Ha! Thanks for this...
Out of curiosity... Does this work with PB 2.5 as well?
This is great, thanks a lot rdavisct!
Edit: Nevermind, figured it out.
Sent from my MB865 using xda premium
Question
Question. Does the bug still exist wherein the battery discharges completely and the phone is unable to regain a charge with CWM on Recovery script installed? I haven't personally experienced this because I've never let my battery drain. I've seen it posted in another thread.
http://forum.xda-developers.com/showthread.php?t=1543792&page=12
KEB64 said:
Question. Does the bug still exist wherein the battery discharges completely and the phone is unable to regain a charge with CWM on Recovery script installed? I haven't personally experienced this because I've never let my battery drain. I've seen it posted in another thread.
http://forum.xda-developers.com/showthread.php?t=1543792&page=12
Click to expand...
Click to collapse
Yea thats his phone.not a roms doing
Sent from my MB865 using XDA
rdavisct said:
Yea thats his phone.not a roms doing
Sent from my MB865 using XDA
Click to expand...
Click to collapse
So to answer ur question no,u have nothing to worry about
Sent from my MB865 using XDA
Oh I thought it was a cwm on recovery exclusive bug. BTW, congratulations on inheriting ifaber's work. I'm looking forward to V6. V5 is one of my favorites.
Sent from my MB865 using XDA
I can't get the script to stick. After I do the setup and reboot, I boot into CWM like it should, but once I power off and boot again it just boots normally. I followed the directions exactly, and tried the process again, but the same results.
I assume it's because I'm not creating this script where it wants to go. Any advice or help? Thanks
I should note that I'm on stock 3.6 and have only rooted and installed the bootstrapper previously.
41rw4lk said:
I can't get the script to stick. After I do the setup and reboot, I boot into CWM like it should, but once I power off and boot again it just boots normally. I followed the directions exactly, and tried the process again, but the same results.
I assume it's because I'm not creating this script where it wants to go. Any advice or help? Thanks
I should note that I'm on stock 3.6 and have only rooted and installed the bootstrapper previously.
Click to expand...
Click to collapse
Sounds like you are not mounting the /system first. Make sure u type it exactly in terminal emulator as i posted before running powerscript like so "mount -o /dev/block/mtdblock3 /system" without the quotes
Sent from my MB865 using XDA
Does the removal script work with this setup?
Sent from my MB865 using XDA
rdavisct said:
Sounds like you are not mounting the /system first. Make sure u type it exactly in terminal emulator as i posted before running powerscript like so "mount -o /dev/block/mtdblock3 /system" without the quotes
Sent from my MB865 using XDA
Click to expand...
Click to collapse
I typed it just as it is, and even done it in adb shell with copy and paste, but it would never create the init.d folder or the 99cwr script. So I opened root explorer to see what was going on. The system was mounted as rw, but it just wouldn't create it. So I made the init.d folder myself and ran powerboost again and it created the 99cwr script, but still, normal bootup. I guess it needs to be called during boot or whatever, but idk where to set that. Any suggestions or advice? Thanks
41rw4lk said:
I typed it just as it is, and even done it in adb shell with copy and paste, but it would never create the init.d folder or the 99cwr script. So I opened root explorer to see what was going on. The system was mounted as rw, but it just wouldn't create it. So I made the init.d folder myself and ran powerboost again and it created the 99cwr script, but still, normal bootup. I guess it needs to be called during boot or whatever, but idk where to set that. Any suggestions or advice? Thanks
Click to expand...
Click to collapse
It's because the stock ROM doesn't have init.d support. Flash this then try again.
Nice! That was it. Everything works as it should now. Thanks
cogeary said:
It's because the stock ROM doesn't have init.d support. Flash this then try again.
Click to expand...
Click to collapse
Sorry. Read too fast.assumed you were already had init.d support
Sent from my MB865 using XDA
i still can't get it to work..me also have the same problem as @41rw4lk,but after i flash the init.d file I still cannot get it to work:'(
stock rooted 2.3.6
---------- Post added at 07:00 PM ---------- Previous post was at 06:33 PM ----------
sorry a noob question, where do i need to install the busybox? system/bin or system/xbin