i flashed the ics leak with odin and rooted it and now it wont restart or power off i have to do a battery pull. it freezes on the power off screen. it doesnt seem to affect anything else its just very anoying. does anyone know how i can fix this?
it is a known issue with ics, the search feature is ur friend . Only known fiz right noe is either a)quickboot app from market, or b)14 toggle mod for ics
Or hold power for 12 seconds.
Sent from my SAMSUNG-SGH-I727 using xda premium
I have this issue when running the deodexed/zipaligned version, but not the straight Odin flash.
Just need to keep wiping & reflashing. I didn't have this problem on my first or fourth flashes, but I did on my second and third flashes.
I had this problem along with the dead home and search buttons. I did a factory data reset and everything is fine. The only recurring issue is the the mms app freezing when attempting to delete a thread.
Frogacuda said:
I have this issue when running the deodexed/zipaligned version, but not the straight Odin flash.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I727 using xda premium
Related
this just started happening on the new sky ics (real thing) build, and now on superlite-mx 5.1.. ill press a button and even somtimes just pulldown notifcation bar and it will restart and vibrate over and over till i press the power button to restart the phone
Girn said:
this just started happening on the new sky ics (real thing) build, and now on superlite-mx 5.1.. ill press a button and even somtimes just pulldown notifcation bar and it will restart and vibrate over and over till i press the power button to restart the phone
Click to expand...
Click to collapse
Sounds like left over data, bad download, bad flash, or a combo of those
Girn said:
this just started happening on the new sky ics (real thing) build, and now on superlite-mx 5.1.. ill press a button and even somtimes just pulldown notifcation bar and it will restart and vibrate over and over till i press the power button to restart the phone
Click to expand...
Click to collapse
I'm going to make a shot in the dark and ask if u have uclcl5 installed as ur radio. If so I causes major flash issues for me on a fresh rom install. So much so I have to flash cla4 first, then a new from, then cl5 again to get it to work
icenight89 said:
I'm going to make a shot in the dark and ask if u have uclcl5 installed as ur radio. If so I causes major flash issues for me on a fresh rom install. So much so I have to flash cla4 first, then a new from, then cl5 again to get it to work
Click to expand...
Click to collapse
No im using cla4.. I followed all steps and did superwipe. Why is it still bad flashing?
Sent from my SAMSUNG-SGH-I727 using xda premium
Girn said:
No im using cla4.. I followed all steps and did superwipe. Why is it still bad flashing?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
sometimes for no reason band corruption occurs. I suggest the following in can
factory reset 3x
format system 3x
wipe dalvik cache 3x
dark side 2x
Odin back stock
reboot twice
Odin can
dark side again
flash custom rom
I had similar problems to you and this looking procedure cured them.
I have the same problem with my fiancée phone which I am on right now. Shuts off and starts repeatedly vibrating on a stock non rooted phone.... I never got around to rooting this phone, unless she did it and didn't tell me.but assuming this isn't rooted what do I do?
mistaashby said:
I have the same problem with my fiancée phone which I am on right now. Shuts off and starts repeatedly vibrating on a stock non rooted phone.... I never got around to rooting this phone, unless she did it and didn't tell me.but assuming this isn't rooted what do I do?
Click to expand...
Click to collapse
Could be a sticky power button
Sent from my A500 using Tapatalk 2
StolenVW said:
Could be a sticky power button
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
That
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Pull the battery plug in the USB cable and put the battery back in. Charge it. Mine did that when the batt died. Wouldn't even charge etc.. gotta trick it into booting then leave it for a while let it charge. Wipe battery stats if your rooted cwm etc...
Sent from my SAMSUNG-SGH-I727 using xda premium
I posted a thread a few days ago about not being able to power off or restart my Samsung Galaxy s2 skyrocket on ATT. I am using SKy's ICS rom http://forum.xda-developers.com/showthread.php?t=1602216 with the newest update and I still cannot turn it off. The response I got was to use the Darkside Wipe, I tried that, loaded the base rom, then rebooted (it rebooted on its own) flashed the update, and now im back to it not being able to turn off.... I have searched every where and everyone says the issue is resolved, but its not working. Please point me in the right direction to fix this issue.
Pull the battery
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Ive lived without if i need to reboot then hold power till it reboots and if i need recovery then do the same but press volume buttons right as it shuts down
Sent from my SAMSUNG-SGH-I727 using xda premium
Thank you! Did't want to have to pull the battery anytime I needed to restart my phone. Holding the power button in for 10-15 seconds even when its froze forces it to restart. At least now I can put my case back on it....
I was wondering if anyone knew a way to stop it from freezing up? Or at least know whats causing it?
I had this problem too with the Ics roms. If you use the touch recovery to wipe factory data reset it should work. I used to one recommended in the sky Ics thread and had no problems after that.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
irtnerapleasure
Do you have a link to it? I have been looking for options and I must be missing it.
I did do the Dark Side complete wipe, and after it worked, it stopped working when I applied the update.
perkinsjm said:
Do you have a link to it? I have been looking for options and I must be missing it.
I did do the Dark Side complete wipe, and after it worked, it stopped working when I applied the update.
Click to expand...
Click to collapse
Just factory wipe, wipe cache, dalvik in whatever cwm you have
Ill try that again, and redownload the patch and see if that fixes it. Is there anyway to get an error log to see whats FCing or crashing?
perkinsjm said:
Ill try that again, and redownload the patch and see if that fixes it. Is there anyway to get an error log to see whats FCing or crashing?
Click to expand...
Click to collapse
Logcat with adb
Anyone one else experiencing a stall when rebooting using SKy ICS 4,2F-4.5A?
If I reboot either from CWM or from using the drop down or the power button, the phone hangs up with a black screen and all the LED buttons lit up? Then I have to hold the power button down to do a hard reboot.
I have reflashed numerous times and have come through numerous updates and this one issue persists.
Anyone?
Rogers
Kernel RUXLF3
Update 4.2F - 4.5A
Radio:UCLF5
No problem here. You have installed busy box, fixed permissions, and the usual stuff?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I got the exact same issue, busy box installed, permissions fixed. Tried flashing everything again didn't solve it, kernel etc.
The only thing I didn't try is radio, are you using rogers radio as well?
Also it happens if I just try shut down the phone.
Try doing a backup in cwm, then just immediately restore that backup... often fixes that problem for me on sky ics.
kishke said:
I got the exact same issue, busy box installed, permissions fixed. Tried flashing everything again didn't solve it, kernel etc.
The only thing I didn't try is radio, are you using rogers radio as well?
Also it happens if I just try shut down the phone.
Click to expand...
Click to collapse
I got it resolved but only by fluke. Flashed 4.2-5b as well as the CYMBALINE kernel (an attempt to resolve bluetooth connection issues) and now everything boots fine.
Thanks
I flashed the kernel without it being solved. I did the backup+restore and I think it seems to have fixed it, I'll do some more checking tomorrow kinda late here but thanks!
Btw after you flashed 4.5a you didn't need to flash b
Had the same problem after doing a fresh 4.2 R2 base install. I let the phone fully cache (5 mins or so) and I tried rebooting to CWM to flash the 5A update and the phone hung on shutdown and my cap lights stayed lit up. I realized I forgot to install busybox after 1st boot-up per the OP instructions. So I held power button for 10secs, rebooted, installed busybox and it rebooted fine into CWM to flash update. Weird, never seen that before.
DudelePOWski said:
Anyone one else experiencing a stall when rebooting using SKy ICS 4,2F-4.5A?
If I reboot either from CWM or from using the drop down or the power button, the phone hangs up with a black screen and all the LED buttons lit up? Then I have to hold the power button down to do a hard reboot.
I have reflashed numerous times and have come through numerous updates and this one issue persists.
Anyone?
Rogers
Kernel RUXLF3
Update 4.2F - 4.5A
Radio:UCLF5
Click to expand...
Click to collapse
Running Rogers ICS stock here rooted and busybox first, then flashed the modded UXCLF3 Kernel, hangs on the Rogers animation and the touch keys stay on whenever I try to shut down or reboot the phone, have to pull the battery all the time, trying the Backup + Restore route now, hope it works otherwise I'll have a brick and a phone that won't turn off
howlingmoon12 said:
Running Rogers ICS stock here rooted and busybox first, then flashed the modded UXCLF3 Kernel, hangs on the Rogers animation and the touch keys stay on whenever I try to shut down or reboot the phone, have to pull the battery all the time, trying the Backup + Restore route now, hope it works otherwise I'll have a brick and a phone that won't turn off
Click to expand...
Click to collapse
It worked for me, worst case you can hold the power key for 10s to turn it off.
The issue me and I think also the other guy had was black screen and touch key lights.
DudelePOWski said:
Anyone one else experiencing a stall when rebooting using SKy ICS 4,2F-4.5A?
If I reboot either from CWM or from using the drop down or the power button, the phone hangs up with a black screen and all the LED buttons lit up? Then I have to hold the power button down to do a hard reboot.
I have reflashed numerous times and have come through numerous updates and this one issue persists.
Anyone?
Rogers
Kernel RUXLF3
Update 4.2F - 4.5A
Radio:UCLF5
Click to expand...
Click to collapse
This has been answered in the dev thread. Here is the solution . You need to flash it with cwm touch. I have no idea why but with cwm the older cwm you get hung up rebooting or shutting down. It will also hang when fixing permissions. I have also read that twrp was working also.
Cwm touch can be found here half way down the thread.
http://forum.xda-developers.com/showthread.php?t=1704630
Sent from my SAMSUNG-SGH-I727 using xda premium
I had it and I'm using cwm touch 5.8.1.3 .
if all else fails check the md5 checksums of all downlads, or redownload and check its md5, use touch cwm or as sean is using it now twrp recovery, and read my sig
kishke said:
I flashed the kernel without it being solved. I did the backup+restore and I think it seems to have fixed it, I'll do some more checking tomorrow kinda late here but thanks!
Btw after you flashed 4.5a you didn't need to flash b
Click to expand...
Click to collapse
I went from 4.5a update (fresh base install) to 5b update.
I've been having a bit of a hard time with a friend's Skyrocket tonight. I flashed CM9 for her before, and it seems to work well. In the past two to three weeks, though, she tells me that her phone's been randomly turning off. Tonight, I finally decided to install CM10 on the Skyrocket, thinking that this would fix the issue. I installed it through CWM like normal (I've flashed many a ROM, so I couldn't have messed up this process).
With everything installed, I reboot through CWM. The issue is, the phone just goes black. After pulling the battery and trying to boot again, I see the Samsung logo, followed by a black screen. The phone sort of pulsates for a bit at this point, giving me a short vibration here and there, before finally stopping. Attempting to get into recovery doesn't work either. I also, due to me not being used to the download mode feature (I personally have a Galaxy Nexus), accidentally tried to start it by holding the power and volume buttons (rather than holding volume and plugging the phone in, not touching power). The yellow triangle would show up very briefly, and then the phone shuts off.
When getting into download mode the proper way, I was able to get into Odin and flash CWM again. At this point, I should definitely be able to get into Recovery. But alas, I cannot... Same issues as before. At this point, it's revealed to me that, after the random shutoffs that my friend had been experiencing, she would sometimes also have trouble turning the phone back on. Noticing a trend?
I'd like to know what you guys think: Is this a software issue, or is it a hardware issue? For the former, what do you guys recommend so the phone could boot normally again? And for the latter, well... I don't suppose there are any easy hardware fixes I could try?
If you pull the battery and reinsert does the phone start on its own with no button pushes? If so... Stuck power button.
Sent from my SAMSUNG-SGH-I727 using xda premium
stoopendis said:
If you pull the battery and reinsert does the phone start on its own with no button pushes? If so... Stuck power button.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Nope, not at all. I need to press the power button for it to start.
It'd flash back to stock with Odin and then go from there.
Sent from my SGH-I727 using xda app-developers app
jd1639 said:
It'd flash back to stock with Odin and then go from there.
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I'm embarrassed to say that I didn't try flashing to stock because I figured it would work, but somehow, it did. I still feel that there's something wrong with the power button, and I'll be doing some more testing, but for now, everything's okay. Thanks for your help.
I bet you can reflash cm10 and it'll work fine. Just do a factory reset and the wipes and you'll be fine.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Wipe ALL the things, then Odin back to stock and reinstall. I'd bet that solves it
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
This is the Q&A for the unofficial CM 10.2 for the SGS4G.
Sent from my SGH-T959V using xda premium
Is it just me or is fix permission missing from CWM.
So, apart from GPS not working, as far as you know everything basic is working well?
sent from me
getochkn said:
Is it just me or is fix permission missing from CWM.
Click to expand...
Click to collapse
Yeo, it is. I didn't touch anything related to the recovery except the recovery fstab that I must update to b compatible w the new JB so idk if I have to do anything else to have that feature back or it was CWM by default then, I will find out bout it soon.
itzik2sh said:
So, apart from GPS not working, as far as you know everything basic is working well?
sent from me
Click to expand...
Click to collapse
You can say so
Sent from my SGH-T959V using Tapatalk 2
Damn... I thought there was a chance GPS would somehow be possible I'm starting to think its wishful thinking... Come on samsung
Sent from my SGH-T959V using Tapatalk 2
getochkn said:
Is it just me or is fix permission missing from CWM.
Click to expand...
Click to collapse
I believe koush decided to throw away the fix permissions button in CWM because he said it was largely placebo effect and had no real purpose anymore.
Sent from my Nexus 4 using xda app-developers app
Thanks for all the solutions and answers that I have collected from users around here, I have been able to update the OP for the FAQ (post 3) in the main thread. So either a question is answered here or not, please also have a look over the FAQ @ post 3 in the dev thread to track down the answered common questions, thanks .
Sent from my SGH-T959V using Tapatalk 2
so do you know if external mics work on this Rom?
Ok guys i have flashed near every rom this phone has ever had and never ran into a bootloop problem. So i had CH 10.2 on my phone for 2 days with no hiccups. Then today after letting my phone die completely "battery death" i pluged it in and now it keeps bootlooping and i cant get it into recovery if i hold down volume down + power it loops at the galaxy s 4g starting screen. If i let it go of the power button at the correct time it just bootloops. anyone have any ideas?
http://www.android.com/about/jelly-bean/
Vismis said:
Ok guys i have flashed near every rom this phone has ever had and never ran into a bootloop problem. So i had CH 10.2 on my phone for 2 days with no hiccups. Then today after letting my phone die completely "battery death" i pluged it in and now it keeps bootlooping and i cant get it into recovery if i hold down volume down + power it loops at the galaxy s 4g starting screen. If i let it go of the power button at the correct time it just bootloops. anyone have any ideas?
Click to expand...
Click to collapse
The Recovery Is Volume Up + Volume Down + Power Button
Sent from my SGH-T959V using xda premium
1234west said:
The Recovery Is Volume Up + Volume Down + Power Button
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Ok if i hold that combo it loops the galaxy s 4g splash screen if i hold the combo then let go of the power button at any time during the splash or right when it turns to black then it just normally boots into the Cyanogen boot screen then sits there spinning for going on 2 hours then i just pull the battery any ideas?
Vismis said:
Ok if i hold that combo it loops the galaxy s 4g splash screen if i hold the combo then let go of the power button at any time during the splash or right when it turns to black then it just normally boots into the Cyanogen boot screen then sits there spinning for going on 2 hours then i just pull the battery any ideas?
Click to expand...
Click to collapse
Battery Pull. Hold Vol Up + Vol Down + Power. Whenever The Samsung Galaxy S 4G Splash Screen Comes On, Let Go Of The Power Button And Keep The Volume Buttons Held Down. Should Take You To Recovery
Sent from my SGH-T959V using xda premium
OMG YES!!! I have no idea what i did but i pressed the combo when i plugged it into my computer and it looped the battery screen twice then went straight into CWM recovery did not go through the splash screen like a normal CWM recovery start but whatever i got to remove the rom and flash the new Slim Rom . Anyone have any idea what could have caused this just so i know what to or what not to do in the future ?
Try using adb
Sent from my SGH-T999 using xda app-developers app
To get to CWM recovery on this ROM, simply download 'Quick Boot' application and use it to get to recovery. It works.
Apex launcher crashes as well. I think issue is ROM related. Also, ROM is very heavy, I couldn't find why.
Edit: ROM is snappier after using CM performance features and letting cache do its work.
sent from me
jeffreylin_ said:
That's not very helpful if you can't get past the CyanogenMod splash though.
Click to expand...
Click to collapse
I got through the splash screen on 1st try.
You should check if you worked according to ROM instructions.
I usually always format system as well as wipe everything twice before flashing any new ROM.
I was referring to :
1. the lack of recovery button on power menu.
2. The inability to use hardware keys to get to recovery after flashing this ROM.
Heimdall One-click (in download mode) and try again.
You're right - I missed that option in developer features - it's called 'advanced reboot options'.
I'd suggest you get to download mode - one click heimdall and reflash this ROM after dowble wiping dalvik, cache, and format system.
I've flashed numerous ROMS to my phone before but have never ran into a problem like this.
-I went back to stock
-flashed CM7, as recommended from the OP
-downloaded and flashed CM10.2 but it gets stuck around 75%
I've been on this thread, and the rom thread as well as waiting a bit, hoping to find a solution or it figures itself out. Nothing! Is it unsafe to pull my battery when its at 'Installing update' (75%) for an extended period of time?
Also, i am on CWM 5.0.2.8
Thanks
I flashed it from ICS (Ultragen) and had no problem.
You can try that as well.