Related
Since SetCPU was updated today to support the tegra II chip, I thought I would just give you all a heads up. Hope to see some kernels compiled with overclocking slots soon.
coolestmage said:
Since SetCPU was updated today to support the tegra II chip, I thought I would just give you all a heads up. Hope to see some kernels compiled with overclocking slots soon.
Click to expand...
Click to collapse
Cant you overclock by hand without that?
There are a few other apps and methods to overclock. The newest version of setcpu is able to see the slots in clemsyn's kernel, but they don't exceed 1ghz.
Sent from my Droid using XDA App
Looks like the xoom is already OCd to 1.5. Can't wait to see some kernels for us too
Wrong section.
At any rate, I'm sure once coolbho3000 puts his overclock code in github, the kernel devs around here may be able to get these puppies overclocked as well. The difference being that the Xoom as a .36 based kernel as where we are still running .32 based kernels, so there is just as much chance that it doesn't port.
When posting, think of the content and context. This thread is about an app. But this section is for Guides, Kernels, and ROMs to be released. I know this section is where most folks spend most or all of their timing reading/posting, but there are 4 sections for a reason, to keep content organized and relevant. Let's help the mods do that by posting in the appropriate section.
miphonematt said:
Wrong section.
At any rate, I'm sure once coolbho3000 puts his overclock code in github, the kernel devs around here may be able to get these puppies overclocked as well. The difference being that the Xoom as a .36 based kernel as where we are still running .32 based kernels, so there is just as much chance that it doesn't port.
When posting, think of the content and context. This thread is about an app. But this section is for Guides, Kernels, and ROMs to be released. I know this section is where most folks spend most or all of their timing reading/posting, but there are 4 sections for a reason, to keep content organized and relevant. Let's help the mods do that by posting in the appropriate section.
Click to expand...
Click to collapse
Am I missing something? Isn't this in the general section?
Why do there seem to be so many self imposed forum police these days? Seems like half the posts I see are people *****ing at the op
There is a big difference between 36 and 32. Honestly, I only assume this from looking at the latest 38 rc commits and comparing the two. But it seems to be significant, even in its comments and verbosity. What's missing is cpu-tegra.c or the cpufreq driver for tegra written by Colin Cross (android dev) - instead we have NVIDIA's cryptic cpufreq.c .. I can barely understand what's going on with most code.. but it seems like our kernel version is from a time where NVIDIA's code was still being sorted thru by the aforementioned Google dev.
I have setcpu installed however I cant change the governor
collindv said:
Am I missing something? Isn't this in the general section?
Why do there seem to be so many self imposed forum police these days? Seems like half the posts I see are people *****ing at the op
Click to expand...
Click to collapse
Because we are supposed to self police ourselves otherwise the mods just close our forum.
grinch247 said:
I have setcpu installed however I cant change the governor
Click to expand...
Click to collapse
Because your kernel isnt set up to be changed
thebadfrog said:
Because your kernel isnt set up to be changed
Click to expand...
Click to collapse
however I can alter the speed up or down...and check off set on boot..
grinch247 said:
however I can alter the speed up or down...and check off set on boot..
Click to expand...
Click to collapse
Yes and so can I. I can also set the governor with a script or manually. They kernel for the GTab has 2 settings....performance and powersave... and as far as I know setcpu doesnt support the .32 kernel that GTab has. It does support the .36 kernel that the xoom has.
collindv said:
Am I missing something? Isn't this in the general section?
Why do there seem to be so many self imposed forum police these days? Seems like half the posts I see are people *****ing at the op
Click to expand...
Click to collapse
I (one of the two mods) moved this into the General section where it should be. It had been in the Development section which wasn't the right place.
And thebadfrog is correct - we (as a community) benefit when everyone helps everyone out - including making sure posts are created in the right spot, and aren't just another variation on a question that might have been asked 15,245,332 times before.
I apologise for posting in development. I wasn't even paying attention. Thank your for moving the thread for me.
Originally Posted by coolestmage
Since SetCPU was updated today to support the tegra II chip, I thought I would just give you all a heads up. Hope to see some kernels compiled with overclocking slots soon.
Cant you overclock by hand without that?
__________________
| chuong trinh thiet ke web | Dịch vụ Quản lý website | cty thiet ke web | thiet ke trang website | lÃ*m website giá rẻ
You need a kernel that supports overclocking and the GTab doesnt have one yet
thebadfrog said:
Yes and so can I. I can also set the governor with a script or manually. They kernel for the GTab has 2 settings....performance and powersave... and as far as I know setcpu doesnt support the .32 kernel that GTab has. It does support the .36 kernel that the xoom has.
Click to expand...
Click to collapse
wondering if the xoom setcpu profile would jive w/ our tablets?
The gtbalet's benchmark is around 2,500. The overclocked Xoom got 2850. Standard Xoom @ 1Ghz got 2,150.
Am I missing something???? If the gtablet could be OC'd that would be huge.
grinch247 said:
wondering if the xoom setcpu profile would jive w/ our tablets?
Click to expand...
Click to collapse
Kayak83 said:
The gtbalet's benchmark is around 2,500. The overclocked Xoom got 2850. Standard Xoom @ 1Ghz got 2,150.
Am I missing something???? If the gtablet could be OC'd that would be huge.
Click to expand...
Click to collapse
The profiles won't until the AOSP frequency scaling is imported into the kernel sources - and that's not an easy process. Then the kernel will have to be compiled, etc.
Yes - it'd be nice to be OC'd - but battery life would be affected. It's a tradeoff in many ways....
jerdog said:
The profiles won't until the AOSP frequency scaling is imported into the kernel sources - and that's not an easy process. Then the kernel will have to be compiled, etc.
Yes - it'd be nice to be OC'd - but battery life would be affected. It's a tradeoff in many ways....
Click to expand...
Click to collapse
On my OG Droid I like being able to drop the speed for battery savings when the screen is off if it's not in use. So there's more in it than just big numbers.
I am running Cognition 4.4.8, which will not allow OC/UC. I actually just want to UC. What recommendation would you have for a kernel compatible with Cognition 4.4.8 for Captivate that would allow me to UC?
Don't you mean oc/uv? I don't think you know what you are talking about.
Yeah its UV (undervolt). Find any kernel that allows it and is working with your ROM. Maybe ask in that thread as others could be using a custom kernel for that exact reason.
Sent from my SGH-I897 using XDA Premium App
UC is a real term, maybe he meant he wants to limit his clock speed to 800mhz. What's that called if not UC?
Although undervolting and underclocking to save battery is a waste of time. The cpu doesn't use that much battery in the first place, the screen and the modem use the most power, you want the charge to last switch to the lowest brighteness and 2g, that will give way more battery than uc/uv will.
studacris said:
UC is a real term, maybe he meant he wants to limit his clock speed to 800mhz. What's that called if not UC?
Although undervolting and underclocking to save battery is a waste of time. The cpu doesn't use that much battery in the first place, the screen and the modem use the most power, you want the charge to last switch to the lowest brighteness and 2g, that will give way more battery than uc/uv will.
Click to expand...
Click to collapse
+1 on the battery topic. Even at a high OC the battery drain is not that much worse... a little yeah but not too severe.
Also good point about UC.. wasn't thinking about that at all ..underclock what!?!?
some people falsely think that the phone runs at 1ghz all the time, when in fact it downclocks itself and ramps up clockspeed when it needs it....so unless you have an app thats using 100% CPU all the time, your phone is running around 200mhz at idle.
Pirateghost said:
some people falsely think that the phone runs at 1ghz all the time, when in fact it downclocks itself and ramps up clockspeed when it needs it....so unless you have an app thats using 100% CPU all the time, your phone is running around 200mhz at idle.
Click to expand...
Click to collapse
+1 again Although there are different governors that do different things most phone at stock will idle down to 200mhz. My phone for instance idles down to 800mhz, but thats just my prefrence
Yep, I meant OC/UV. I typed too fast for my own good!
Good points
Thanks for the message on how little battery undervolting saves. That was quite helpful. I did try the discussion board for Cognition, but no one seemed to be posting on using an alternate kernel, which is why I asked for recommendations here.
I believe Cog is KB1 based, so this kernel should work: http://forum.xda-developers.com/showthread.php?t=988805
Thanks I will certainly trie eXist's kernel.
Ernesto47 said:
Thanks I will certainly trie eXist's kernel.
Click to expand...
Click to collapse
If you want the best battery life, I suggest something other than cognition. In my experience, i9000 based custom roms get better battery life.
Sent from my CM7 powered captivate
@sixstringsg I notice that you are using Cyanogenmod. I keep looking at that, but since it was still not listed as stable, I was not sure whether to try it. How are you finding the stability?
I was browsing the Optimas 2x forum today and ran into an awesome kernel with GPU overclock. which sounds pretty cool to me. also the dev mentioned something about overclocking "system bus" which improvers memory/2D/3D/etc. i think someone in this forum should take a look into this KERNEL and try letting us taste some of this goodness.
Here are the links:
http://forum.xda-developers.com/showthread.php?t=1119771
http://forum.xda-developers.com/showpost.php?p=14654927&postcount=36
while im no genius when it comes to this stuff, somehow i would suspect that people here are already looking into this.
i could be wrong tho lol
pyckvi said:
I was browsing the Optimas 2x forum today and ran into an awesome kernel with GPU overclock. which sounds pretty cool to me. also the dev mentioned something about overclocking "system bus" which improvers memory/2D/3D/etc. i think someone in this forum should take a look into this KERNEL and try letting us taste some of this goodness.
Here are the links:
http://forum.xda-developers.com/showthread.php?t=1119771
http://forum.xda-developers.com/showpost.php?p=14654927&postcount=36
Click to expand...
Click to collapse
The person to ask this to is Morfic. He's all about tweaking bus speeds to improve not only cpu but gpu performance as well. But much of what you've already requested has been incorporated
jlevy73 said:
The person to ask this to is Morfic. He's all about tweaking bus speeds to improve not only cpu but gpu performance as well. But much of what you've already requested has been incorporated
Click to expand...
Click to collapse
But where is he...??
G2X
CPU overclock is something that makes sense for us right now but what would a GPU overclock get us? To me thats just something that will lower the life of our phone with no real reward until games come out that our phone can't run. Right now our phone can run pretty much all games at full speed.
gpu overclocking would be sweet... now my question would be has anyone tried to load Optimas 2x kernel/software on the g2x since they are pretty much the same hardware(in theory you would think it would work)... i might even try to load this kernel onto my phone when i get home from work so if i mess anything up ill have my gear to fix it
crisis187 said:
gpu overclocking would be sweet... now my question would be has anyone tried to load Optimas 2x kernel/software on the g2x since they are pretty much the same hardware(in theory you would think it would work)... i might even try to load this kernel onto my phone when i get home from work so if i mess anything up ill have my gear to fix it
Click to expand...
Click to collapse
Please don't try to load O2x software on your G2x.
pyckvi said:
I was browsing the Optimas 2x forum today and ran into an awesome kernel with GPU overclock. which sounds pretty cool to me. also the dev mentioned something about overclocking "system bus" which improvers memory/2D/3D/etc. i think someone in this forum should take a look into this KERNEL and try letting us taste some of this goodness.
Here are the links:
http://forum.xda-developers.com/showthread.php?t=1119771
http://forum.xda-developers.com/showpost.php?p=14654927&postcount=36
Click to expand...
Click to collapse
I remember reading a while ago that GPU/System bus overclocking was attempted by some kernel dev, then later on, the dev realized through extensive testing that GPU and system bus clocks were locked, the changes to the kernel source had no effect (hardwired). Now this was a few months ago when I was reading up on Tegra kernel development before I got my G2x. Now all these could have been obsolete, and maybe now someone has found a way to do the above via kernel source updates.
Another issue that most people don't mention here and many people have been guilty of, is the GPL issue. The guy who supposedly did this overclocking has not published his kernel source code anywhere (GPL/XDA rules issues), so no one can examine what he did and prove that it worked....
GideonX said:
Please don't try to load O2x software on your G2x.
Click to expand...
Click to collapse
have you tried it yet though is my question
im not worried if i flash a kernel and it doesnt work i can reflash my old kernel if it doesnt work and gets stuck into a bootloop
crisis187 said:
have you tried it yet though is my question
Click to expand...
Click to collapse
Someone in another thread tried this and it messed up their baseband. A restore doesn't fix it apparently.
Big rush dog, the tiamat kernel guru and Guy getting engadet headlines for oc the xoom to 1.7 ghz has gpu oc in his kernels. I will be honest though, I can't tell the difference except maybe video streaming works a little smoother. I personally don't think it is worth the devs time...
Sent from my LG-P999 using XDA App
Howdy! I'm the developer of that kernel
To be honest the GPU overclocks aren't all that beneficial. There is a little bit of a speed bump (I managed to get the highest score on nenamark2 for example). But the difference is was 27fps vs 32fps. If someone is interested in incorporating that into the g2x I'll be happy to show them the changes I've made. I haven't released the source because I'm lazy but there isn't too much to it.
Actually, if you look at the voltKernel sources for the O2X you'll see the same changes there.
chuckhriczko said:
CPU overclock is something that makes sense for us right now but what would a GPU overclock get us? To me thats just something that will lower the life of our phone with no real reward until games come out that our phone can't run. Right now our phone can run pretty much all games at full speed.
Click to expand...
Click to collapse
Yes, superficial benchmarks like quadrant can be pushed to 5400 only with max cpu oc.
However, did you notice how 1.2 thru 1.5 gets you the same fps with no added benefit than more heat created?
Pushing other things other than cpu should let us remove bottlenecks and not tighten them up.
If you want your G2x to life 20yrs, 1.5ghz is not the way to go.
I have no kernel ready for release, to notice changes, I stuck to 1.5ghz, but the final result will be more likely 1.2 or 1.3ghz.
Maybe with a "don't hold my hand, give me freedom or give me death" DBU version at 1.5Ghz later.
I'm not shy to increase vcore on a SoC. But unlike the Nexus S, this thing gets HOT, fast.
Avetny pointed out that thread, I'll see if fallout hit something I have missed so far.
The clocks get compared to chip defaults in many places, choosing the smaller of the two, so it's just tedious replacing them with sane defaults, unless I stick to my current approach of offsets instead of absolutes.
We'll see.
That's also the reason I don't update my kernel often. Right now commits in cm git are only preparatory, config changes that made things smoother I already used.
I'll release something if they finish their version of BLN.
Or if I'm happy with gpu/bus/ram oc/tweaks.
not going to make people flash a kernel for no reason. As jlevy can attest, kernel not following cm git, not even based on it can work very well.
Not having latest cm commit on kernels that take another approach is not always useful.
Especially if we track regressions that cm devs back out later, that's all this gains.
So yes, there will be a gpu oc, when it's ready.
Great!
@ fallout0 thank you i hope that you can help out one of our devs on this.
morfic said:
Yes, superficial benchmarks like quadrant can be pushed to 5400 only with max cpu oc.
However, did you notice how 1.2 thru 1.5 gets you the same fps with no added benefit than more heat created?
Pushing other things other than cpu should let us remove bottlenecks and not tighten them up.
If you want your G2x to life 20yrs, 1.5ghz is not the way to go.
I have no kernel ready for release, to notice changes, I stuck to 1.5ghz, but the final result will be more likely 1.2 or 1.3ghz.
Maybe with a "don't hold my hand, give me freedom or give me death" DBU version at 1.5Ghz later.
I'm not shy to increase vcore on a SoC. But unlike the Nexus S, this thing gets HOT, fast.
Avetny pointed out that thread, I'll see if fallout hit something I have missed so far.
The clocks get compared to chip defaults in many places, choosing the smaller of the two, so it's just tedious replacing them with sane defaults, unless I stick to my current approach of offsets instead of absolutes.
We'll see.
That's also the reason I don't update my kernel often. Right now commits in cm git are only preparatory, config changes that made things smoother I already used.
I'll release something if they finish their version of BLN.
Or if I'm happy with gpu/bus/ram oc/tweaks.
not going to make people flash a kernel for no reason. As jlevy can attest, kernel not following cm git, not even based on it can work very well.
Not having latest cm commit on kernels that take another approach is not always useful.
Especially if we track regressions that cm devs back out later, that's all this gains.
So yes, there will be a gpu oc, when it's ready.
Click to expand...
Click to collapse
thanks morfic i hope everything goes smooth with your kernel, i would love to test it out once u feel it is ready. and thanks for not rushing it.
faux123 said:
I remember reading a while ago that GPU/System bus overclocking was attempted by some kernel dev, then later on, the dev realized through extensive testing that GPU and system bus clocks were locked, the changes to the kernel source had no effect (hardwired). Now this was a few months ago when I was reading up on Tegra kernel development before I got my G2x. Now all these could have been obsolete, and maybe now someone has found a way to do the above via kernel source updates.
Another issue that most people don't mention here and many people have been guilty of, is the GPL issue. The guy who supposedly did this overclocking has not published his kernel source code anywhere (GPL/XDA rules issues), so no one can examine what he did and prove that it worked....
Click to expand...
Click to collapse
You should talk to Fallout0 he seems like he got past the system bus/GPU locked issue. both of you can maybe learn something new from each other. & it would be awesome if the both of you can work on a kernel together.
Wouldn't a higher clocked G2x cause more heat? Heat being the reason this things reboots so often? Maybe a slower G2x is the way to go.
Would overclocking the gpu help run nds4droid any better? What else would ocing the gpu do? Everything seems to be very fast as it is lol
Sent from my LG-P999 using XDA Premium App
dkb218 said:
Wouldn't a higher clocked G2x cause more heat? Heat being the reason this things reboots so often? Maybe a slower G2x is the way to go.
Click to expand...
Click to collapse
Pushing cpu more I don't see useful other than keep up with your buddy's Nexus S' quadrant scores and make sure your hands stay warm in a cold Chicago winter.
I build kernels usually when things stutter or otherwise annoy me. The pushing the OC usually comes by request of those who just want more more more.
I do like to remove bottle necks.
The hardwired clocks. Well the.cpu ones are hardwired too.
The gpu/bus oc works, until boost and throttling kick in, where again values are compared to hardwired values. using offsets after the comparison would be the way around without killing boosting and throttling.
Guess main thing that stopped me is the heat at 1.5ghz, and the frowns over 1.2ghz and 1.3ghz kernels, without further "what else is in there"
Still hoping fallout can share what he/she has, it'll help making this a reality, sooner.
It's tedious. Most of all.
Yes, I FINALLY did it!!! I overclocked my G2X. I would appreciate if anyone could share their experiences with o.c. pros and cons... Should I retreat or stay where I am? Please some feed back!
Over 1300 seems to cause trouble on mine.
i dont think oc'ing is really that necessary with a phone this fast but if u must i wouldn't go above 1.3 (just seems unstable above that). I think the "Pros" come from being able to underclock. Setting up profiles for uc'ing when screen is off or as battery level drops etc really prolongs the life of the battery (at least in my case)
On my OG droid that came limited at 550 mhz, ya, oc'ing was def necessary but I cant really think of any "Pros" for oc'ing this phone.
each phone is different though so play around and you'll find a combination that works great for your phone, good luck
Well... you can get some serious bench scores... This thing rocks the Mandelbrot multithread test in smartbench 2011 at 1.5 ghz. Other than that it helps with games.
Sent from my LG-P999 using XDA App
wu_wei_lion said:
Well... you can get some serious bench scores... This thing rocks the Mandelbrot multithread test in smartbench 2011 at 1.5 ghz. Other than that it helps with games.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
What about the CPU not having enough cooling and frying the CPU over time. I presume its just like Desktop overclocking but without all the extra cooling you can add to make it safe for the hardware.
tombaker1 said:
What about the CPU not having enough cooling and frying the CPU over time. I presume its just like Desktop overclocking but without all the extra cooling you can add to make it safe for the hardware.
Click to expand...
Click to collapse
But what i really want to know is if oc could damage the phone. After all if there is that danger it's noy worth it...
In all honesty I used to be really into benchmark scores and OCing the heck out of my phone and under volting it in the process but that led to many battery pulls ect. What I've noticed is just keep it at stock and mild uving seems to be the best for me its stable decently fast just 2 cents though
Overclocking a cpu is the same as on a pc, only a bit more dangerous on a phone. (This phone already has overheating problems running at stock speeds ) On a computer, people pay a premium for parts that are easily overclocked, and have either very good fans/heatsinks or a liquid cooling rig.
Overclocking is dangerous, especially because not all chips are going to be made equal, even if they come off the same production line. These chips are designed to run at a certain voltage, and certain clock speed. As far as real world use, (NOT benchmarks. Sure, they look pretty and all, but benchmarks are never very accurate.)
Sure, you might get 2-3 more fps on your games, but is that worth the risk of shortening the life of your chip/phone?
(And just so you know, I've been building/overclocking pc's for years, but I also understand what you need to do to keep it stable, and it's *all about cooling*.)
If you're not convinced, try this. Don't overclock your phone, and use it for a few days. Tell me honestly that you really notice a real-usable difference with the chip overclocked or not. (Games set aside, but like I said, getting a couple extra fps on a game to me isn't worth the risk without a proper cooling setup)
For those of you that really don't understand what you're doing to your chips when you overclock, I'd suggest doing some reading about it. A good place to start would be here: http://en.wikipedia.org/wiki/Overclocking
So you think using fauxs kernel is not safe or reduces the life of the chip? I just flashed it and didnt oc or uv further then fauxs default settings...
Sent from my LG-P999 using XDA App
I'm not saying it's for sure, I'm saying there's a chance.
Plus keep in mind that these kernels have other really nice additions besides overclocking and undervolting. I'm using faux's stock voltage kernel ext4, and leaving it at stock settings, and it really works great.
I just posted this up because I see a lot of people more interested in quadrant scores (which to me are pretty useless) than stability of their phones. If you do overclock, and it works for you, more power to you. I just want to inform people. I'd HIGHLY suggest if you aren't sure, read that wiki article, it's a great place to start. (not all information is there, but it gives a very good general idea on how and what overclocking is.)
Thanks! i always like reading knowledgeable and informative posts!
Sent from my LG-P999 using XDA App
mstrk242 said:
I'm not saying it's for sure, I'm saying there's a chance.
Plus keep in mind that these kernels have other really nice additions besides overclocking and undervolting. I'm using faux's stock voltage kernel ext4, and leaving it at stock settings, and it really works great.
I just posted this up because I see a lot of people more interested in quadrant scores (which to me are pretty useless) than stability of their phones. If you do overclock, and it works for you, more power to you. I just want to inform people. I'd HIGHLY suggest if you aren't sure, read that wiki article, it's a great place to start. (not all information is there, but it gives a very good general idea on how and what overclocking is.)
Click to expand...
Click to collapse
OK, you definitely convinced me.... I have also faux (let me tell you exactly - Kernel Version 2.6.32.9 FR Faux 123-v0.03) on EagleBlood 1.05. Could you please tell me what I need to do set up in order to be safe? Thanks!
I'd just go to faux's thread in the development section (his froyo thread, not the cm7 one, since you're using eagleblood), and download his stock voltage kernel. (It's in the first post.) He's on .04 now, by the way.
Then reboot into recovery, and flash the file you downloaded. It'll overwrite your current kernel and modules with the new one, then reboot.
mstrk242 said:
I'd just go to faux's thread in the development section (his froyo thread, not the cm7 one, since you're using eagleblood), and download his stock voltage kernel. (It's in the first post.) He's on .04 now, by the way.
Then reboot into recovery, and flash the file you downloaded. It'll overwrite your current kernel and modules with the new one, then reboot.
Click to expand...
Click to collapse
I could not find this thread under G2X Android Development Section... I found threads Kernel Trinity, Kernel CM7, Kernel LGE Stock Froyo, Kernel Morphine... Which one is it...? Please do have some patience, at least I learn fast!
krekabl said:
I could not find this thread under G2X Android Development Section... I found threads Kernel Trinity, Kernel CM7, Kernel LGE Stock Froyo, Kernel Morphine... Which one is it...? Please do have some patience, at least I learn fast!
Click to expand...
Click to collapse
You passed right by it. LGE stock froyo. (That doesn't mean it's a stock froyo rom, it means it's *based* on one )
http://forum.xda-developers.com/showthread.php?t=1102720
Choose the stock voltage one. (ext3 or 4, depending on your preference.)
mstrk242 said:
You passed right by it. LGE stock froyo. (That doesn't mean it's a stock froyo rom, it means it's *based* on one )
http://forum.xda-developers.com/showthread.php?t=1102720
Choose the stock voltage one. (ext3 or 4, depending on your preference.)
Click to expand...
Click to collapse
Thanks you've been very helpful. That's why I made this post I hope this can help other people as well as it's helped me! )
krekabl said:
I could not find this thread under G2X Android Development Section... I found threads Kernel Trinity, Kernel CM7, Kernel LGE Stock Froyo, Kernel Morphine... Which one is it...? Please do have some patience, at least I learn fast!
Click to expand...
Click to collapse
And a lot of times the kernel will be credited to the developer. So if you see "faux's kernel" people are referring to kernels by faux123. Trinity kernels were developed by morfic. If you are having a hard time finding a specific one, look at the top left to see who started the thread and sometimes that will help find it. Does that make sense? I had to pull an overnight at work so I am a little loopy....
Sent from my butt using XDA Premium App
I'm really very happy with my Nexus S 4G. It's unlocked and rooted, but otherwise pure stock and I really like it that way.
Coming from the Hero it's a pleasure to have a phone that doesn't require heavy modification to make it perform properly. Still, I miss the thrill of flashing ROM's and kernels.
I would like to try a kernel...mainly to simply o/c a bit, but I don't want it to suffer stable and reliable operation. I recall with the Hero, some of the kernels would adversely affect things like the GPS, making it something I couldn't rely on.
So my question: what kernel can I use that is uncapped, but will otherwise be as close to stock as possible?
Thanks for your thoughts!
Kernels are pretty different over here. I don't even know what's closest to stock. They pretty much all have mods in them. Matr1x kernel is pretty popular. You may have to up the voltage for it if you oc to 14xx. 1200 seemed pretty stable to me with default voltages. Currently franco kernel is pretty popular. You can't oc it, but it seems pretty snappy without oc. GLaDOS is also being used a bit but i've read some mixed reviews and for me at least it did seem a little lagging at times for the short period I ran it. I tried Trinity kernel when I first moved over from the hero and it seemed kind of flaky though it's possible that could have been due to the kang I was running. There are a few others out there. Cm7 kernel has a lot of the same mods cooked in though it's likely not the latest updates. You will see a lot of mention of BLN and Voodoo. There are apps on the market for those features and there's an app nstools that has some kernel config settings you can adjust depending on kernel. Mainly just try to read a lot. Most of the roms and kernels haven't given me any major issues beyond the random reboot, which coming from the hero, just means "normal" lol.
Sent from my Nexus S 4G running CM7/franco.Kernel
Once you flash you can't stop O_O that my experience i'll direct you to Peteralfonso's kernel on his website here
Searching the forums would help you more than anything. You will get more info by searching, rather waiting people to reply here. These questions are asked on daily basis. And get the same replies everyday. I don't sound to be mean but seriously there is more info than you can get by starting another thread, only thing is you need to dig the info.
I have tried a few different roms and kernels and for once cm7 runs perfect for me w the supplied kernel. No reboots. Has been stable at 1440 performance for testing but I usually leave it at 1000 on demand.
Yeah they all have this blinking light crap in it now by default which I hate, and the lights turn off and I don't like that either. I want the light on when I'm using the phone and off when I'm not, not the other way around!
Sent from my Nexus S using XDA App
I like the bln mod, but I do not like the one that turns off the backlights when using the phone. It's just easier to use the buttons imo and gives a quicker visual reference for everything. Otherwise I mostly am left wondering what is up with all the black space.
Sent from my Nexus S 4G running CM7/franco.Kernel
suhas_sm said:
Searching the forums would help you more than anything. You will get more info by searching, rather waiting people to reply here. These questions are asked on daily basis. And get the same replies everyday. I don't sound to be mean but seriously there is more info than you can get by starting another thread, only thing is you need to dig the info.
Click to expand...
Click to collapse
I hear you on that, and spent a lot of time reading comments and concerns and problems about the various kernels available. They all seem to pretty much be experimental, with various idiosyncratic problems and lots of bells and whistles such as aforementioned BLN, Voodoo, deep idle, etc.
I thought maybe I was missing something in my search for a kernel that would allow o/c, but not have the stability concerns of a the feature-rich, highly customizable kernels.
I think the Matr1x kernel will be your best option, u can OC it till 1400mhz, what I don't recommend to do, but at 1200/1300mhz its pretty stable.
It also got many options like BLN, BLX, Live OC, touch wake, etc.
But if you don't want them, why you just don't use 'em?
Like just flash the kernel and keep it like it is, and maybe do some overclocking.
wanna stable ? stock kernel
basically , there is no kernel more stable then stock ...
qtwrk said:
wanna stable ? stock kernel
basically , there is no kernel more stable then stock ...
Click to expand...
Click to collapse
True, but he prefers to OC it a bit.
Sent from my Nexus S
franciscofranco's kernel (link) works best for me. It's fast (no lags even without OC, I'm running at stock 1000 MHz), reliable (I've been using it for at least month and I haven't got any random reboots or application hangs) and battery efficient (thanks to deep idle and other tweaks).
irizwan said:
Once you flash you can't stop O_O that my experience i'll direct you to Peteralfonso's kernel on his website here
Click to expand...
Click to collapse
+1
Never found a more stable kernel than Pete's. However, I've been on Glados for the last week or so and am seeing excellent battery life with Deep Idle.
Icecoldmeat said:
True, but he prefers to OC it a bit.
Sent from my Nexus S
Click to expand...
Click to collapse
personally i think overclock is totally unnecessary , why ? 1 GHz is sufficient to handle all job you require to the phone...
Best thing to do would be compile your own stock kernel with oc.
qtwrk said:
personally i think overclock is totally unnecessary , why ? 1 GHz is sufficient to handle all job you require to the phone...
Click to expand...
Click to collapse
True again. I love 1100mhz because it gives you a bit more speed with no lagg, and you batterylife is still awesome.
Sent from my Nexus S
deville~> said:
franciscofranco's kernel (link) works best for me. It's fast (no lags even without OC, I'm running at stock 1000 MHz), reliable (I've been using it for at least month and I haven't got any random reboots or application hangs) and battery efficient (thanks to deep idle and other tweaks).
Click to expand...
Click to collapse
with deep idle OFF, the difference between the two is minimal, idle stats displayed deep idle has been 0
Downloaded and testing peter alfonso's kernel now. Its very minimalistic, no options like deep idle etc, and u can OC it up to 1400mhz. Running 400-1100mhz for a day now and the battery life is just awesome.
U can find it on:
http://www.peteralfonso.com
Sent from my Nexus S
albundy2010 said:
Best thing to do would be compile your own stock kernel with oc.
Click to expand...
Click to collapse
Or one with LiveOC which is kinda better cause it also OC the GPU =D
+1
Click to expand...
Click to collapse
the akward moment when someone said they +1'd you but actually didn't -_-
there're too many to choose.i don't like the ones that update so often indeed.