Database Info

[ROM] Rdavisct's Supercharged Atrix Under New Ownership! See bottom of op!

-What do we have here?
-Supercharged script's
-SuperClean script's
-Deblur
-Deodex
-Oc Under terminal emulator (built in in V4 and above see second post)
-Build.Prop tweaks (a lot of 'em)
-Sdcard speed tweaks
-1 percent battery mod
-No carrier logo
-Quick Settings
-Webtop over hdmi
*********-How to Install...**********
------------------This only applies to v1-4, For V5 and above follow instructions listed next to downloads below---------------
-Boot into**BOOTSTRAP**(NO SAFESTRAP)
-Format System
-Install Stock Deodex rom
-Wipe Data/Factory Reset
-Wipe Cache
-Wipe Dalvik Cache
-Reboot phone
-Once stock rom has loaded install bootstrap and reboot into recovery(we need a clean, deodxed, rooted base)
-Wipe Data/Factory Reset
-Wipe Dalvik Cache
-Wipe Cache
-Install SuperCharged Rom
-*****DO NOT FORMAT/WIPE ANYTHING AFTER FLASHING****
-Now what???
-When prompted choose go launcher and set as default
*********Changelog*********
-V1.0
-Initial Release
-Known minior theming bugs.
-v2.0
-Fixed a few theme bugs(wipe data/factory reset)
-Fixed Contacts
-Edit's to updater script
-Added apps (including bloat freezer, I checked its cool)
-Move some apps to /data (so you can uninstall them)
-Added ics notification sounds
- Put back moto launcher (use home switcher)
-V3
-****HUGE Performance increase over V1 and V2****
-Fixed Super user issue's
-Fixed busy box issue
-Fixed webtop?
-Fixed permission issues with oc. Should no longer cause a reboot.
-V4
-Fixed webtop (I'm sure this time)
-OC'd to 1122 on boot
-Ad blocking in hosts file
-Wireless tether hack is now included (this damn thing..)
-Removed Motomizer (I could not seen any improvement over the included scripts)
-Removed Scripts app and BloatFreezer (both were causing push ad's)
-Removed Ciq Completely! (THANKS JIMBRIDGEMAN!)
-V5
-Based on 2.3.6 Update
-Added CapnPez's Toggles
-Better Init.d support (Now loaded from system/bin if install-recovery.sh fails)
-New boot animation
-More build.prop tweaks
-This is a fesh build of 2.3.6 from a system dump, it has been deodxed.
-----------V5_Update_1
------------------Fixed haptic feedback matches 2.3.6
------------------Fixed Supercharger "V6" scripts THANK YOU ZEPPELINROX
------------------Build prop edits to wifi, vm, and 3g Thanks Tyler Carter
---------------------------V5_Update_2
-------------------------------------------Added reboot option and ICS animation. Thank you JRW28 and COGEARY
-------------------------------------------Added ICS Ui, Notification's, and Ringtones.
-------------------------------------------Added Voicesearch from market to system/app
-------------------------------------------Fixed gps fix issues that show up after a few days with rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<----Go launcher ics theme
*********Downloads*********
http://depositfiles.com/files/7sm8wjocq <----SuperCharged V 5 This is not a flashable zip, it is a cwm backup, you will need to extract the contents of the zip to the root of your sdcard. Instructions are included in the zip. READ THE "README" FILE INSIDE THE ZIP!---YOU WILL NEED TO WIPE DATA/FACTORY RESET NO MATTER WHAT ROM YOU ARE COMING FROM. Then go to back up and restore, select restore, select SuperCharged_V_5. Let it restore Reboot and you are on your way!
http://downloads.h22designs.com/SuperCharged_V_5_DO_NOT_FLASH.rar <----SCV5 Mirror thanks to Script
http://depositfiles.com/files/0z63kidwv <---- SCV5 Update 1, ALL YOU NEED TO DO IS FLASH FROM BOOTSTRAP, No wipe etc... SCV5 "ONLY"
http://depositfiles.com/files/k4opdtt3g <----SCV5 Update 2, ALL YOU NEED TO DO IS FLASH FROM BOOTSTRAP, YOU DO NOT NEED TO WIPE ANYTHING. This Includes SCV5 Update 1. Having force close issues? Use the full backup listed below.
http://depositfiles.com/files/en42gu9jp <----SCV5 Update 2 Full System Img. Place on root of sdcard, Use advanced restore and only restore /system Read the "README" File included in the zip. You will Not need to wipe. This is only for those of you facing force closes after updating to SCV5_Update_2.
http://www.multiupload.com/9UHYFAPETU <----Supercharged V 4 (If coming from
V3 Just wipe dalvik cache any other rom, full wipe see above)
http://depositfiles.com/files/a3my85m50 <---- Alt Link for Supercharged V 4
http://www.sendspace.com/file/o7kzac <---- Alt link for Supercharged V 4
http://www.multiupload.com/FIUXZ4FBFD <----Supercharged V 3 (Wipe data/factory reset, wipe dalvik cache)
http://www.multiupload.com/21J01SXJ6Z <----Supercharged V 2
http://db.tt/MtDaBE8O <----Supercharged Atrix Rom
http://www.multiupload.com/IZVCVPRNGJ <----Stock Deodexd Rom Direct Link
http://forum.xda-developers.com/showthread.php?t=1420980 <----Stock Deodexed Thread
Thanks for clicking Thanks!!
*********Thanks*********
Thanks: Jimbridgeman-No ciq and more advice then you can shake a stick at , Shady_lanen-Theme base, most of updater script and power toggles, Nitro-Battery Icons,fenny-webtop mod,hashcode,Jydaddy, zeppelinrox, tylercarter... If I forget ya PM me and i'll put it up.
A special thanks to all of you willing to test almost everything I throw at you, It helps so much thanks guys.
Xda Member Script is nice enough to host the rom's free of charged, Please click this link and click thank's! http://forum.xda-developers.com/member.php?u=441777
Hey guys sorry for taking so long to do well... anything :-(. Since I have let my A2 go to take advantage of an amazing opportunity presented to me by another smart phone manufacturer I weighed the options of just letting the supercharged rom die or hand it over to one of the other amazing devs here for the a2. And after literally 354 pm's requesting updates, fixes, or just to get back in the game it became clear I couldn't let it die! And lucky for you guys rdavisct is willing to take the rom on! I hope you all the best of luck and I know you are all in great hands with rdavist. I encourage you all to check out his work and to stay tuned as I know he will make great things happen for your devices! Thank you guys for all your support and hard work, You made a dev out of a tinker lol.

************A note on over clocking***********
For best results this is how ya need to do it. (only if you are using the old method exp typing 1200 into terminal emulator)
-Do not over clock until your phone is fully loaded (feels like setup lag is gone)
-Use motor_hot_plug governor
-Set min and Max to 1000
-Reboot the phone
-Wait till the phone is fully booted (again feels like lag is gone)
-Now open terminal emulater and type "su"
-Now type "1100"
-Run at 1100 for a few mins put some stress on it at 1100
-Now go to terminal emulator and type "su"
-Now type "1200"
****I'm seeing much better results if I "break it in" the over clock as opposed to just jumping in at 1200****
Thanks to Rick#2 for this overclock method.
Original OC thread http://forum.xda-developers.com/showthread.php?t=1341514
************READ ME************
If you are running V4 you will need to delete the file OC3 in system/ect/init.d in order to use this overclock method, the default method in V4 is different then this one but they are both included. Please read the post linked below to learn how to set your own clock speed.
If you want to OC to say 1200 you would open terminal emulator type su, then echo 1200000000 > /proc/opptimizer
Another option is say you know your phone is stable at 1250 you could go to /system/etc/init.d open the file oc3 and change the values to 1250000000 and you would be at 1250 on every boot. DO NOT SET THIS TO A LEVEL YOUR PHONE IS NOT STABLE AT YOU WILL BOOT LOOP.
http://rootzwiki.com/topic/14511-op...4-overclocking-kernel-modulesofficial-thread/

Why distribute a rom as a backup?
It's just so much easier to maintain a rom like this, by just using the /system image for the restore we keep things small, simple, and updates can come much faster. We are also eliminating the possibility of a bootloop during flash to a new rom and we don't need a prep rom that causes gps issues! This will also mean the future updates in theory should never require you to format /data. That means we should not have to lose all our setting's in future editions of the supercharged roms!
____
-Beta;
It means the rom is a "WIP" Work In Progress, With enough of the features working to be a daily driver. In this stage the rom is not to be considered as a finished product or 100% stable. Expect bugs, (Report bugs!)
_____________
********Included in SCV5 update*****
-Like the lighter haptic feedback 2.3.6 has stock?? Me too... Here's how to get it back in SCV5.
1: Click here ----> http://depositfiles.com/files/fg1c2ro4e
2: From cmd or terminal type:
3: adb push framework-res.apk /sdcard/
4: adb shell
5: su
6: mount -o rw,remount /dev/null /system
7: cp /sdcard/framework-res.apk /system/framework/
8: reboot
9: All Done!
__________________
***********MD5**********
SuperCharged V5_Update_2 618A7E1EC527439459717391BDACEB07 *SuperCharged_V_5_Update_2_Do_Not_Flash.rar
SuperCharged V5 AC513654F485042DE5A3E3686031C1B4 *SuperCharged_V_5_DO_NOT_FLASH.rar
SuperCharged V4
SuperCharged V3 35BAE13E25D61A1E3531EECE446F3C2B *SuperCharged_Atrix_V3.zip
SuperCharged V2 CA30B7CDE32C633C8E74EC0005D3C700 *SuperCharged_Atrix_V2.zip
SuperCharged V1 257B237EB0566E679591FB1D493A8A3E *SuperCharged_Atrix.zip

Sounds great! Where can we download it? Thanks

I heard dropbox will get upset if you share to much, have you thought about www.multiupload.com just an idea.
Sent from my MB865 using xda premium

Zoide_ said:
Sounds great! Where can we download it? Thanks
Click to expand...
Click to collapse
It's up now!
kleeman7 said:
I heard dropbox will get upset if you share to much, have you thought about www.multiupload.com just an idea.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Yeah, I will. It's just dropbox is so easy I mean come on in windows it's just a drag and drop to the internet!

lfaber06 said:
It's up now!
Yeah, I will. It's just dropbox is so easy I mean come on in windows it's just a drag and drop to the internet!
Click to expand...
Click to collapse
Agreed, lol. I love dropbox.
Sent from my MB865 using xda premium

I see the link to the new rom is up Could you please provide a link to the "stock deodexed rom"? Thanks

This is working well so far.
So far, Overclocking with opptimizer doesn't need to run for 24 hours to work properly; at 1275mhz I'm beating a galaxy nexus in antutu.
I kinda miss the stock blur homescreen

Do we have to use Go Launcher? Just wondering, Thanks again for another great looking ROM.

Love you lfaber! Great news to wake up to! Will flash tonight once I get home from work. I have the stock deodexed rom already on the phone and I will report back any issues, if I run into any. Thanks!

PeteSeiler2010 said:
Do we have to use Go Launcher? Just wondering, Thanks again for another great looking ROM.
Click to expand...
Click to collapse
You can install another launcher if you wish. I prefer ADW Launcher on my touchpad... It works well here too.
Also, I was able to restore the stock launcher
Drop BlurHome2.apk from the StockRootedOcWebDeodex zip back into /system/app directory, reboot, then install Moto Home Fix to switch to it.

I was wondering if i could use the themes from the StockDeodexRootTogglesOc-2 rom?
So I decided to go ahead and install the ROM and realized that the theme is already there.

Running this all morning so far, its nice and fast and stable, Thanks again!

PeteSeiler2010 said:
Running this all morning so far, its nice and fast and stable, Thanks again!
Click to expand...
Click to collapse
How is your battery life so far?

i installed everything and it looks great so far!
however when i try to open AnTuTu i get a force close.
any ideas?
nevermind.
i updated the app and all is well!

When I try to open my google account to stop it from syncing certain things i get a FC that states. "The application Accounts (processcom.motorola.setup) has stopped unexpectedly. Please try again"
I also am not able to find the email app. I use exchange and can add my account but not able to find the emails.

Coldheat1906 said:
How is your battery life so far?
Click to expand...
Click to collapse
My battery was holding its own pretty well, I would not be able to give an actual percentage now though, I plugged it in to transfer some files and forgot to unplug it...

duke8804 said:
When I try to open my google account to stop it from syncing certain things i get a FC that states. "The application Accounts (processcom.motorola.setup) has stopped unexpectedly. Please try again"
I also am not able to find the email app. I use exchange and can add my account but not able to find the emails.
Click to expand...
Click to collapse
Fixed in v2
moofree said:
You can install another launcher if you wish. I prefer ADW Launcher on my touchpad... It works well here too.
Also, I was able to restore the stock launcher
Drop BlurHome2.apk from the StockRootedOcWebDeodex zip back into /system/app directory, reboot, then install Moto Home Fix to switch to it.
Click to expand...
Click to collapse
BlurHome is back in v2 just use home switcher from the market.
duke8804 said:
I was wondering if i could use the themes from the StockDeodexRootTogglesOc-2 rom?
Yes but you would get the carrier logo back (AT&T logo in status bar) I have not updated them yet.
Click to expand...
Click to collapse

Is the link in the OP for V1 or for V2? This is the one I see:http://db.tt/MtDaBE8O. The filename is SuperCharged_Atrix.zip
Thanks for your great work!
EDIT: I see you added the link for V2 just now

[Script] ultimateRAMscript - IMPROVE YOUR PHONES PERFORMANCE!

Here is a ram script I put together. It's sorta a combination between the V6 Supercharger on option 7, Kickasskernalizer, and Car-o-Dopes tweaks, it has little bit of all those tweaks in it. So i wanna say thanks to zeppelinrox for the V6 Supercharger and the Kickasskernalizer and also Carhauler1969 and Ropodope for the Car-o-Dopes tweaks. There's also a read ahead tweak to set the sdcard at 512kb.
This was made for the HTC Evo 4g so I can't guarantee it will work on your phone but it should. If it won't flash thru recovery, go to bottom of op and download the script by itself and place in the right folder (init.d).
This is not to be combined with the niftyconiptionstweaks or the legit zip because this is different and could interfere with each other. I'd suggest to try all three separately to find which one works best for you.
[Q] What does this do?
[A] It will make your phone faster, more responsive, frees up ram, and could also increase battery life.
Script Values:
It has auto memory manager values of 6,12,75,90,95,125 [option 7 on V6].
It has sysctl tweaks of min free kbytes - 4096, Dirty Ratio - 70, Dirty Background Ratio - 50, and vfs cache pressure - 50 (sense) and 10 (aosp) [Car - o - Dopes tweaks]. And it also has a few tweaks from the kickasskernelizer.
Install at your own risk. I am in no way responsible for anything that happens to your phone.
Zip files to be flashed thru recovery
Sense Version:
http://db.tt/K1HFIrTy
AOSP Version:
http://db.tt/5JgpAGSr
Instructions: Follow Exactly
Flashable Install (may not be flashable on other phones besides the HTC Evo 4g, but you can try and see)
1) Make a nandroid backup incase something goes wrong or you want to revert.
2) Download a file manager like Root Explorer or ES File Explorer (I use Root explorer).
3) Open up root explorer and go to /system/etc/init.d. Click on the "Mount R/W" button (that way you can delete files).
4) Delete or move to a folder on your sdcard (incase you want to revert) any ram scripts or ram tweaks you may have that is in the "init.d" folder (examples of ram scripts or tweaks are 00sysctl, 01sysctl, 06sysctl, 02sicktweaks, 06tweaks, S97ramscript, 99supercharge, and 98Kickasskernel, or any tweaks from niftyconiptionstweaks or the legit zip) .
5) Also if you are running v6 supercharger, you need to un-supercharge. If you are running Kickass Kernelizer, you need to un-kernelize and do not run those scripts while you have the niftyconiptionsscripts installed.
6) Uninstall any ram manager apps or task killers and do not use these.
7) After you uninstall all of that, reboot your phone and verify that none of the scripts you had before are still installed. (it will mess with the scripts you are about to install).
8) Boot into recovery (preferably Amon Ra).
9) Find the ultimateRAMscript.zip you downloaded and flash it.
10) Reboot phone and enjoy. Let your phone set at the lock screen for about 2 minutes, unlock and let it set for another 2 minutes to let it settle in. Your phone will become dramatically smoother after about an hour.
Manual Install
1) Download the script.
2) Remove any ram scripts or tweaks you currently have. Will be in /system/etc/init.d (its like this on the HTC Evo 4G but may be different on other phones)
3) Copy the script you downloaded and place in the init.d folder. /system/etc/init.d. (if using root explorer, you will need to hit the "Mount R/W" button at the top to be able to remove or place any scripts.
4) Once the script is placed in the init.d folder, long click on the script and click "permissions" and change it to "rwxrwxrwx" which is the same as checking all the boxes.
5) Reboot phone. Verify that the script is in the init.d folder and enjoy.
Script for manual install
Sense Version:
http://db.tt/ZjmcF4Ec
AOSP Version:
http://db.tt/dqaX5Hrb
Sent from a Nifty Tomatoe
Hit that thanks button if I managed to help

[ROM] SilverLight™ 5 - alpha released ! | Spice Mi-350n

Disclaimer: I'm not responsible for any damage caused to your device by following these instructions(though it may not happen!)
Screen Shots are in the 2nd post !!
Change Log is in the 5th post
Things i'm thinking to add are at 4th post.
My sincere credits to Yuweng & casacristo for being with me in trying to make a2sd work in MTK phones !!
Pre-requisites:
For your Computer:
- 7zip
For your phone:
-Rooted, of course !
- Modded Recovery [Get it from here]
-Make a nandroid recovery of your phone before installing.
-Full wipe/factory reset, either through phone or modded recovery is recommended required.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah ! Bala's ROM is SilverLight™ |
Click to expand...
Click to collapse
Click to expand...
Click to collapse
SilverLight™
SilverLight™ 5 - alpha !​
Hi friends, sorry i'm too late than i expected. Day's passed on swiftly and i'm here to just release the alpha of Silverlight 5.
SilverLight 5 bug fixes are here : http://forum.xda-developers.com/showthread.php?p=30734779#post30734779
Important feature is that it is based on Android 2.3.6 !
It has been ported from Alcated 918D [MTK 6573]
Everything works fine. (Special thanks to yasir bro for testing it !!!)
I also named it as Stock Android 2.3.6 update for Spice Mi-350n.
It is just stock, for now
Another important thing is that, I'm making this port an open-source port. Since, i saw new rom makers emerging, it would be easy for them to cook/build custom ROMs from this port.
One thing, if someone wants to use it, do give me an information and a credit in your thread !!
Click to expand...
Click to collapse
Sorry, if i have disappointed you, but full version will be released as soon as possible.
Whats more to come:
Suspense !
You can even come to the time when i ported this one and how i suffered from there on without time to add features, in the download page !!
FROM HERE, ALL DOWNLOADS WILL BE AVAILABLE AT OUR GOOGLE CODE PAGE:
http://code.google.com/p/silverlight-roms-350n/
Click to expand...
Click to collapse
In the downloads page, download
2.3.6-update-2.zip
&
a2sd-p1.zip
First flash a2sd-p1.zip and then flash 2.3.6-update.zip.
NOTE: Flash Dark-tremor a2sd and any equivalent if you want to use it.
SilverLight™ 4:
Change Log:
*Bugs fixed
*Added new tweaks:
---Forced launcher into memory
---Raised JPEG quality to 100%
---User Interface will e rendered with GPU
---The time that a black screen is seen after a call is reduced
---Better Touch screen & Scroll responsiveness
---Better Battery life
---3G,Net-Speed & Photo,video recording quality incresed.
*Added SilverLight custom script & Loopy smoothness script at init.d
*Removed SuperCharger script
*Replaced FileExplorer with a new MIUI one - try it!
*Replaced Music app with ICS Music app - try it !
*Removed XDA app (causes few problems)
*Removed Go-Launcher EX (for space)
*Tweaked Youtube app to load 720p videos with Wi-Fi as well as 3G !
*Added a new boot_logo !
Try it now !!!
It is a SIGNED update.zip. So don't extract it as the other version.
Flashing this zip is enough if you are on SilverLight™ 3.
If you are on stock V2, then download PART1.zip only and flash it before flashing SilverLight™ 4 ! (no need PART2.zip - no problem even if you flash it).
SilverLight™ 4
DOWNLOAD: http://www.mediafire.com/?q92e83s4zn3arhh
Click to expand...
Click to collapse
Click to expand...
Click to collapse
EXTRAS:
PART 1:(not signed) http://www.mediafire.com/?rx7gmqpj9d6il62
PART 2:(not signed) http://www.mediafire.com/?i6l67a2176l7no9
FOR A2SD:
After installing the ROM, install Terminal Emulator app from market.
Open the app and type the following one by one:
su
a2sd install
##Phone will reboot
Open the app again,
su
a2sd datasd
##Phone will reboot
Open the app again,
su
a2sd cachesd
##Phone will reboot.
THATS ALL !!!
XXXXXXXXXXXXXXXXXXXXXXXXXXX----------------------------------------------XXXXXXXXXXXXXXXXXXXXXXXXXXXX
SilverLight™ 3
Features:
>> Based on Official Spice build v2 !(thanks to yasir bro!!)
-- If you are on Bala's ROM v1.5/1.01(or did not flash your phone by following this guide), then do please flash your phone with official build v2 using this guide. It takes a mere 7 minutes for you to flash it but it takes hours together for me to make one for v1.5. If you want, i can make one for v1.5 also, but it can't be released within one week. So, bear with me & do upgrade your phone to official v2 !!!
NOTE1: If you are on Bala's ROM v1.5, then you won't lose your apps. Just flash official v2 with the help of flashing tutorial and the flash SilverLight 3 !
NOTE2 (read this only after reading the flashing guide above): If you are upgrading, then in the flashing guide linked above, in step 5, i did it like & it worked : After loading the scatter file, with battery inserted,i connected the phone by pressing Back+Menu buttons. My pc detected it and i clicked Format->Download. I kept holding it till the red process completed and from there everything went fine and flashing was successful.
Click to expand...
Click to collapse
>> ICS Themed
--This is the reason why this update took a lot of time !! My first hands on theming. So, if you have anything to say, feel free.
Click to expand...
Click to collapse
>> V6 Supercharged
--Get ready to fly with the V6 Supercharger (script created by zippelinrox). Read more about it here. To set your custom settings, just open terminal emulator, type: su --> hit enter --> type: v6
Click to expand...
Click to collapse
>> No Bloatwares !
--The spice bloatwares are removed and its a clean ROM !!
Click to expand...
Click to collapse
>> Beats audio & Bravia Engine
-- Beats audio & Bravia engine mods are included !!
Click to expand...
Click to collapse
>> DarkTremor A2SD v2.7.5.3 beat4
--Enjoy installing unlimited apps with the a2sd !! Read more on using it in the following 3rd post !!
Click to expand...
Click to collapse
>> Pre-installed apps:
--A2SD GUI
--Adfree(no more ads)
--Barcode Scanner
--GO Launcher EX v2.87 (latest)
--ICS Clock Widget
--ICS search bar
--New ICS Launcher
--MobileUncleTools
--Experia Arc S Launcher
--SpiceUp - official app of the Spice Mi-350n Support site!
--Update Me Smartphone - check & download future ROM updates from phone itself!
--XDA app
Click to expand...
Click to collapse
>> Misc features
-- Busyboxed
-- Rooted !!
--Deodexed
--Zipaligned
-- Added ICS boot animation
-- Disabled boot sounds
-- Added Galaxy Nexus's Ringtones !
-- Home button Wake up mod included(it is up to you to install NoDeepSleep.apk)
-- Replaced default font with Roboto font (stock ICS font !!)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
DOWNLOADS:
Download: http://www.mediafire.com/?i3sk5jqd9whi2g8
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Installation Instructions (SL-v3):
NOTE: Its is highly recommended to make a complete nandroid backup(including boot.img) before installing. Do not boot your phone in between.
Also disable Signature verification every time you flash a zip because they are not signed.
1) Download 'SilverLight-3_by_balamu96m.7z'. Extract it. Then you'll have SilverLight_Part1_by_balamu96m.zip , SilverLight_Part2_by_balamu96m.zip & SilverLight_Part3_by_balamu96m.zip(These are flashable zips. So do not extract them)
Click to expand...
Click to collapse
2) Copy all the three & place it in your sdcard. (preferably at the root).
Click to expand...
Click to collapse
3) Now boot into recovery (modded or CWM) and choose - flash zip from sdcard --> select zip from sdcard --> select SilverLight_Part1_by_balamu96m.zip.
Let it install without any error. DO NOT TRY BOOTING.
Click to expand...
Click to collapse
4) Now, before installing SilverLight_Part2_by_balamu96m.zip, mount 'System' & 'Data' in recovery (i.e) mounts --> system and then data. Now install SilverLight_Part2_by_balamu96m.zip by steps followed above !. DO NOT TRY BOOTING.
Click to expand...
Click to collapse
4) Again, with similar steps followed before, SilverLight_Part3_by_balamu96m.zip.
Click to expand...
Click to collapse
5) After installing SilverLight_Part3_by_balamu96m.zip, a do a full wipe/Factory reset in the recovery. (It is a must)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
THATS ALL !! You have successfully installed SilverLight™ 3 !!
Now boot your phone. First boot may take long time (even 10 minutes !), but don't worry. It will boot !!
STEPS TO ENABLE A2SD after installing the ROM:
NOTE: If you had done this already for Bala's ROM v1.5, no need to do again.
1) Make a backup of all your sdcard files in your computer because partitioning will erase all your files.
2)Now boot in recovery --> partition sdcard --> partition sdcard --> Swap size: 0mb --> Choose size of the partition that you prefer (recommended 1024mb)(not more than 1399 mb because beta 04 supports till that only)
Let it partition your sd without any error !!
[NOTE: If you are partitioning for the 1st time with recovery, the default type of the partition will be ext2 - that is what we need & with this a2sd will work .
If you have mistakenly upgraded your partition to ext3 or ext4, then use MiniTool Partition Wizard (its free) and change your partition to ext2. Only then a2sd will work.]
Now boot normally. Now with the help of A2SD GUI app, make apps to be stored in sdcard(will be on the main-screen!). Your phone will reboot once or few times. Read more about using A2SD GUI in the following 2nd or 3rd post !!
VOILA !! a2sd is working !!! You can verify/view its space with titanium backup app !!
Now you can place all your files back on your sdcard.
With recovery you can even backup your sd-ext whenever required. (sd-ext is the place where apps which you install will be stored)
XXXXXXXXXXXXXXXXXXXXXXX_--------------------------------XXXXXXXXXXXXXXXXXXXXX
__________________________________________________________________________________________________________________________________________
VERSION 1.5
__________________________________________________________________________________________________________________________________________
Features (v1.5):
---Removed all Spice bloatwares !
---Added the following as default programs:
--A2SD GUI !~HOT~
--Mobile Uncle Tools~HOT~
--AdFree (No more Ads) ~HOT~
--Android Assistant
--Barcode Scanner
--GO Launcher EX
--Google Play Store[updated Market app] !
--Google Search[updated]
--Terminal Emulator
--YouTube
---Darktremor A2SD v2.5.7.3 beta 04~HOT~
---Added BEATS AUDIO - enhances sound. You can feel it in earphones.~HOT~
---Added Sony BRAVIA IMAGE ENGINE - enhances image quality. Try it!~HOT~
---DEODEXED !!~HOT~
---Zipaligned all apks to optimize RAM usage !
---Modified Status bar (fading error fixed) & Drop-Down with transparency & modded battery icon! (see screen-shots [v1.5]!)
---Added new colourful wallpapers to the default wallpaper gallery !
---Added Nexus One boot animation and shut animation!
---Added Samsung Vibrant's boot and shut sounds!
---Added Nexus default ringtones and notifications(error fixed!)
---BusyBox added !
---Pre-rooted, of course!
INSTALLATION INSTRUCTIONS [v1.5] :
NOTE: Its is highly recommended to make a complete nandroid backup(including boot.img) before installing.
Also disable Signature verification every time you flash a zip because they are not signed.
1) Download 'Bala's_ROM_v1.5.7z'. Extract it.
You will have a folder named 'Bala's_ROM_v1.5'
In that you'll have PART-1.zip , PART-2.zip & PART-3.zip(These are flashable zips.So do not extract them)
2) Copy the folder & place it in your sdcard's root.
3) Now boot into recovery and choose - flash zip from sdcard --> select zip from sdcard --> #open folder#'Bala's_ROM_v1.5' --> select PART -1.
Let it install without any error. Now try booting your mobile. The phone will not boot (more clearly: should not boot if installation completed correctly ! lol !)
4) Now, before installing PART-2, mount 'System' & 'Data' in recovery (i.e) mounts --> system and then data. Now install PART-2 by steps followed above !
[Now try booting. It should boot now !! LOL ]
[WHAT YOU BOOTED ABOVE IS NOT THE FULLY WORKING ROM, MANY THINGS DOESN'T WORK !! SO BOOT AGAIN TO RECOVERY ]
4) Again, with similar steps followed before, install PART-3.
5) After installing PART-3, a do a full wipe/Factory reset in the recovery. (It is a must)
THATS ALL !!This is Complete Version 1.5. You have successfully installed VERSION 1.5. Sorry for making it large. I'll try reduce it later.
STEPS TO ENABLE A2SD after installing the ROM:
1) Make a backup of all your sdcard files in your computer because partitioning will erase all your files.
2)Now boot in recovery --> partition sdcard --> partition sdcard --> Swap size: 0mb --> Choose size of the partition that you prefer (recommended 1024mb)(not more than 1399 mb because beta 04 supports till that only)
Let it partition your sd without any error !!
[NOTE: If you are partitioning for the 1st time with recovery, the default type of the partition will be ext2 - that is what we need & with this a2sd will work .
If you have mistakenly upgraded your partition to ext3 or ext4, then use MiniTool Partition Wizard (its free) and change your partition to ext2. Only then a2sd will work.]
Now boot normally. Now with the help of A2SD GUI app, make apps to be stored in sdcard(will be on the main-screen!). Your phone will reboot once or few times. Read more about using A2SD GUI in the following 2nd or 3rd post !!
VOILA !! a2sd is working !!! You can verify/view its space with titanium backup app !!
Now you can place all your files back on your sdcard.
With recovery you can even backup your sd-ext whenever required. (sd-ext is the place where apps which you install will be stored)
DOWNLOAD LINK::
http://www.mediafire.com/?nt6idp7vw2qdl3x
(sorry for making it large !)
_________________________________________________________________________________________________________________________________________________
VERSION 1.01
_________________________________________________________________________________________________________________________________________________
Deodexed version 1.01 added !! Same installation instructions !! Check Downloads !
Features (v1.01):
(updated 20 Mar)
1.Removed all Spice bloatwares !
2.Added the following as default programs:
-Android Assistant
-Barcode Scanner
-GO Launcher EX
-Google Play Store[updated Market app] !
-Google Search[updated]
-Nexus Revamped Live Wallpaper!
-Terminal Emulator
-YouTube
2. Zipaligned all apks to optimize RAM usage !
3.Modified Status bar & Drop-Down with new battery icon! (see screen-shots [v1.01]!)
4. Added new colourful wallpapers to the default wallpaper gallery !
5.Added Nexus One boot animation and shut animation!
6.Added Samsung Vibrant's boot and shut sounds!
7.Added Nexus default ringtones and notifications!
8. Pre-rooted, of course!
Overall it looks to be an Ultra fast & Stable ROM !!
INSTALLATION INSTRUCTIONS [v1.01] :
(instructions updated 20 mar)(fixed all reported errors!)
1. Download the file 'Balas_ROM_v1.01_GB_signed_update.zip' and copy it to your sdcard - root of the sdcard is preferred.
2. Flash it as 'update.zip' in modded recovery.
(i.e) [for beginners] Go to recovery --> Flash zip from sdcard --> choose zip from sdcard and select Balas_ROM_v1.01_GB_signed_update.zip
NOTE: Since the file is signed there is no need to disable signature verification !!
Let the installation process complete without any error.
Then reboot.
Voila !! Your new ROM is booting !!
Deodexed version may take some more time to boot than normal. Don't get afraid !
Try and post your comments !!
DOWNLOAD LINKs (update.zip)(Mediafire) :
- Normal odexed version - Bala's_ROM_v1.01_GB_signed_update.zip
- Deodexed version - Deodexed_Bala's_ROM_v1.01_GB_signed_update.zip
Screen Shots in the second post !
An extract of review posted by yasirmujtaba: (here)
yasirmujtaba said:
The rom porvided by bala is supercool
I m trying to rate it..
Style:-
1-Go launcher
2-Custom battery icon
3-Modified Notification bar
4-Custom wallpapers and ringtones & notifications
OVERALL:- 9/10
Performance:-
Very Very good response no lagging even
when skyfire dolphin and opera are running simultaneously
Ram consumption is very effective
Overall- 9/10
So the rom scores a huge number of 9
Click to expand...
Click to collapse
Hit THANKS if you like my ROM !!

Screen Shots !!
SCREEN SHOTS - SilverLight™ 3:
SCREEN SHOTS v1.5:
SCREEN SHOTS v1.01:

NOTE:
-The android version displayed there (in Bala's ROM v1.01&v1.5) is just change in number. The actual version is 2.3.4 only !! Only you know that it is 2.3.4. For others it is 2.3.7 !!
USING A2SD GUI [For v1.5+]
'A2SD settings' on the app's main screen.
------You can choose where apps that you install should be saved either in sd-ext (sdcard partition) or your internal memory.
------ 'Zipalign on boot is off' - is recommended because the ROM is already zipaligned and doing it again on boot will take more time to boot.
------'Swap is deactivated' - I have not used it.....maybe you/anyone can try and reply !
DALVIK:
-- You can choose where Dalvik cache should be saved. Go more info on Dalvik-cache, try googling n reading the wiki about it.Other things can remain the same......
---other tabs, you yourself can read & understand !!
Some more:
One thing to remember - sd-ext is like internal memory for phone, but phone can't find how much space is used or left in sd-ext. Titanium backup will help you there......
All third-party/system apps will tell that apps are installed in phone memory......you should understand that sd-ext is also like internal memory for phone and all other apps !!
Apps should be installed normally .......but your free space in internal memory will remain the same even after installing apps.....you'll notice that ur sd-ext space will be reducing........
Phone can't find how much space is left in sd-ext but titanium backup will help you to know !!
If you find decrease in phone memory even when a2sd in enabled, use a2sd gui to reinstall all app to sd-ext.....u can also type this command in terminal emulator :
su
a2sd reinstall
More over one should not move apps to sdcard in 'application settings' when using a2sd !!

These are few things that i'm trying to add:
Trying to add few requests by some users!!
Extended Power menu with Reboot, Recovery & download - working on it.
Click to expand...
Click to collapse

Change log:​
SilverLight™ 3:
*Removed Terminal Emulator
*Removed Android Assistant
*Based on Official spice build v2
*Highly modified framework-res.apk & SystemUI.apk with ICS theme.
*Added new ICS Launcher
*Added ICS search bar & ICS Clock
*Added V6 SuperCharger!
*Added Xperia launcher
*Added SpiceUp app
*Added Update-Me-Smartphone app
*Added XDA app
*Changed boot animation with ICS's one
*Disabled boot sound
*Added Roboto font
*Added Home Button wake up mod
Bala's ROM v1.5:
*Removed Nexus Revamped Live Wallpaper
*Added A2SD GUI
*Added Mobile Uncle Tools
*Added AdFree
*Added DarkTremor A2SD v2.7.5.3 beta 4
*Added Beats audio & Bravia Engine
*Added Busybox
Bala's ROM v1.01:
*Initial release

what is special in it I've already done all the things you've
done.
and what about ram consumption ......
but thanks for your hard work.....

your Balas_ROM_v1.01 not getting installed
hey.... balamu96m
your nandroid- custom ROM [Balas_ROM_v1.01] is not getting installed....
what is the problem????
i hav followed all the above steps...
i am able to Restore my nandroid backup done by me.... but when i tried your.. its not getting installed....
it shows "Oops... Something went wrong..." message.
[ i am using same recovery (fly blackbird iq260) in my phone as u hav posted screenshots above....
wanna try this rom...
help me out...

same problm here.........
Oops... Something went wrong...

balamu96m said:
please elaborate your problem.......is your phone not booting ?? or not able install in modded recovery ??
try making a wipe data/factory reset and then install the ROM......also disable 'Signature Verification' (it is a must) and try.............reply !
Click to expand...
Click to collapse
1. i hav wiped all data
2. i hav wiped SD card
3. disabled sign verification
4. unzipped yor rom and puted in proper folder.
5. but i selected to restore yor rom its shows some ..... (dots) for few second and shows oops something went wrong...
6. i am not able to install yor rom... using and testing its a later thing...

i'm trying to fix the error - 'Oops..something went wrong'.............also i'll try to create a working update.zip........................
about the RAM consumption, without ant app running, i'm getting 101 mb free and 128mb used..........it looks to ok but need to improve............
i'll post the update.zip as soon as possible !!

hey friends! uploaded update.zip !! It is also Zipaligned to optimize RAM usage !! check first post !! i checked it in my phone and its working !!! try it and reply !!!

balamu96m said:
i'm trying to fix the error - 'Oops..something went wrong'.............also i'll try to create a working update.zip........................
about the RAM consumption, without ant app running, i'm getting 101 mb free and 128mb used..........it looks to ok but need to improve............
i'll post the update.zip as soon as possible !!
Click to expand...
Click to collapse
there is only 70 mb ram free
but response is pretty good .........
on moe thank to you bro.........

yasirmujtaba said:
there is only 70 mb ram free
but response is pretty good .........
on moe thank to you bro.........
Click to expand...
Click to collapse
Thanks for the review dude !! now working on deodexing.........!!
will try to post it soon !

Deodexed version uploaded !! check first post !!

balamu96m said:
Deodexed version uploaded !! check first post !!
Click to expand...
Click to collapse
Flashing Now Tell You Soon
Flashing
4th Time Today lol["CAN IT EFEECT MY ROM LIKE MY E6??"]
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...

yasirmujtaba said:
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...
Click to expand...
Click to collapse
DeOdexing is the process of re-bundling that uncompressed critical data (.odex files) back into your compressed .apk (& .jar) files, so that now all of the data is included in the .apk files necessary to run your applications without the presence of .odex files
In addition all the data is now included within the .jar files necessary to utilize your framework components without .odex files. In a DeOdexed file structure, there are no odex files present.
What is the benefit of DeOdexing?
Deodexing doesn't speed your phone up or do anything of the sort.
It is simply something that is necessary to be able to theme a stock ROM.
Theoratically it should slowdown phone but practically it is negligible.
zipaliging is the process of reorganizing the manner in which the .apk is packaged to optimized it for being parsed faster by the android OS, it is comparable if not better than the odex file structure, so you get the best of both worlds; a themed ROM and the speed of an optimized file structure.
If one can implement all things properly phone will defenately speed up.
i will also make custom rom... but in my vacation. till i will use others.

djgj said:
DeOdexing is the process of re-bundling that uncompressed critical data (.odex files) back into your compressed .apk (& .jar) files, so that now all of the data is included in the .apk files necessary to run your applications without the presence of .odex files
In addition all the data is now included within the .jar files necessary to utilize your framework components without .odex files. In a DeOdexed file structure, there are no odex files present.
What is the benefit of DeOdexing?
Deodexing doesn't speed your phone up or do anything of the sort.
It is simply something that is necessary to be able to theme a stock ROM.
Theoratically it should slowdown phone but practically it is negligible.
zipaliging is the process of reorganizing the manner in which the .apk is packaged to optimized it for being parsed faster by the android OS, it is comparable if not better than the odex file structure, so you get the best of both worlds; a themed ROM and the speed of an optimized file structure.
If one can implement all things properly phone will defenately speed up.
i will also make custom rom... but in my vacation. till i will use others.
Click to expand...
Click to collapse
well you copy very nicely bro lol
waiting for your custom rom
---------- Post added at 06:46 PM ---------- Previous post was at 06:40 PM ----------
balamu96m said:
Deodexed version uploaded !! check first post !!
Click to expand...
Click to collapse
when updating error comes up
that
zip is corrupt

deodexing !
yasirmujtaba said:
Flashing Now Tell You Soon
Flashing
4th Time Today lol["CAN IT EFEECT MY ROM LIKE MY E6??"]
aN Can You Please Explain Dodexing In Simple Words
Is It Related to Theme A Rom ,,,
Sorry If I Am Harassing You...
Click to expand...
Click to collapse
edit: already posted the ans !! any way i'm posting it !!
Harassing ?? Not at all !! i have no problem dude !!
Well, i don't think flashing will affect your phone because i'll have to do it many a times a day and not just 4 times !!
When ever i try and flash my ROM and many a time it'll get struck at boot screen. So i'll be restoring/flashing it many a times a day !
Still thats my view.....i dunno really !
Deodexing.........in simple terms it is like this:
Our phone splits the apks and jars (only system apks and jars) into '.odex' files for fast processing of those files ..........but when the app is split into .apk/.jar file and .odex file, it not possible to edit them and make changes. when those files are deodexed or when we flash a deodexed ROM, the two files, '.odex' file and '.apk/.jar' are combined together and we will have only the apk or jar file and not the .odex file.......hence it makes editing or modifying possible. Also,only because of this, deodexed ROM takes some more time to boot!!
So because of this we can say that it related to theming........that too 'native' theme and not just Launcher' theming which are provided by GO Launcher etc.
I hope you understand...........!! Now any one can easily make themes for our phone !! just edit framework-res.apk and SystemUI.apk, modify,test and upload !!

yasirmujtaba said:
well you copy very nicely bro lol
waiting for your custom rom
---------- Post added at 06:46 PM ---------- Previous post was at 06:40 PM ----------
when updating error comes up
that
zip is corrupt
Click to expand...
Click to collapse
error ?? i didn't get any...........try disabling signature verification...........also try clearing cache, dalvik cache and data [clear data only after a backup via Titanium Bakup or nandroid]
Try n reply !!
Currently trying to add extended power menu with reboot, recovery and download !!

hey balamu96m
i installed yor deodexed signed rom.
works good with 10mb more then other roms.
but there is some problem with status bar(notification bar)...
it stops working when i connect usb cable wid my pc...
so i think problem is with battery application.
overall nice work man

🔥 READ ME FIRST [FAQ][HTC][PICO/EXPLORER][a310e]🔥

"Those, who fail to read history are bound to repeat its mistakes"
People here have and did and will fail to read the things here and many did and many probably will have to lose their devices. You don't have to lose a device to get knowledge inbetween your ears.You don't have to be stupid. You surely can learn from your mistakes. But There's a better way. You can learn from others mistakes. This thread is a compilation of such mistakes ,that I personally have done and many others ,who did and their solutions aka The easy ways.
So, officially I congratulate you for finding this thread and reading Upto here. So, even if you don't read the whole thread, these are the main stuff you must know is
1. Rooting is a dangerous process -done by developers only. If you did root your device, you assume full responsibility for your device. So, if you can't think like one of the developers at least partly, I suggest you don't root your device ,coz when you mess up, the one who deviced the procedure or Rom will not help you. And everything you find here is in "AS IS " tag.
2.If you have rooted, next thing you must do is backup-
Go to recovery,
go to backup and restore
click backup.
I find it strange that this is not included in the root procedure. This surely would've helped a lot of Picos out there.
3.NEVER DO A RUU
-It unanimously holds the number ONE title for the major causes of bricking of Picos.
Trust me -Surely you can save your device, without the ruu. And with ruu, you're bound to fail without proper knowledge and research.
The only time you are suggested by experts to do a ruu is when you have already done a ruu "and" bricked it.
4. Overclocking here may cause burnt nand. -know what Rom you're using-it may have built in-overclock .
However, overclocking doesn't necessarily produce burnt-nand for all devices.
5.Finally, Not all answers you receive in the question and answer thread are good. Some answers will kill your device. So please judge the credibility of the answerer before you follow the answers. Generally, you could track back their previous answers and their working. Thanks meter is a good source of credibility -but not always -Not all who have big thanks record are helpful neither are they knowledgeable-There are spammers, who trick people into giving thanks.Do your home work before you trust a stranger. Recognized developer title is a good source of credibility.
The above five should save you a lot of trouble.
Ever in trouble? Drop by and read.
Do your googling,if you don't understand anything here.Have a great time !

Re: [faq][newbies only][mini edition]
��To start, this thread is only for newBies,who have rooted thier Rom and have a custom recovery. If you haven't, click here
Alright, this thread aims to answer all the frequently asked questions by newBies. The section this thread aims to answer will consist mostly of custom Roms especially cyanogen.
To start, we'll start with basics
Our phone consists of the following five partitions
1.Boot/kernel
2.Recovery
3. System/Rom
3.1What's not working
3.2 Latest links
4. /cache- error /last log
5.Data
5.1Scripts
6.Common issues after flashing Rom, scripts/GAPPS/PLAY STORE /
Ram
7. USB and CPU ,screen and power button-2/7/13
8. About developers and members
9. ��Burnt nand*recovrecovery 25/6/13 *��
10. STILL CAN'T FIND THE ANSWER ��
10.1LOGCAT
10.2ADB
11.MINI TIPS AND TRICKS
11.1CM9/10 themes
11.2.FONT CHANGING AND language तदधा ಥಮು support adding
11.3.DID YOU KNOW?
12. Recommended apps
13. BATTERY LIFE AND PERFORMANCE
14 .http://forum.xda-developers.com/showthread.php?p=38098604
BUILD. PROP TWEAKS
We'll discuss the faq in each.
All links are here
Index:
http://forum.xda-developers.com/showthread.php?t=1754876
This is the best link you'll ever have
Thanks hrkh83
Guides
http://forum.xda-developers.com/showthread.php?p=36057579
Guides for everything
Thanks hpsgill
Make yourself useful by akshat
Seen it before,
Just read this now
http://forum.xda-developers.com/showthread.php?p=37805872
Stock Roms instead of bricking ruu
tk immortal yash
http://forum.xda-developers.com/showthread.php?p=39101954

Re: [faq][newbies only][mini edition]
/BOOT(4 MB Max )
1.what does this partition contain?
It contains your kernel
2.what is kernel?
It's a in betweener between ROM (/system ) and your hardware.
Basically, a software, which connects the main software (your Rom gui) and the hardware
3 .what is the stock kernel version?
2.6
4. Is there a update available?
Yes. You can update it to 3
3.4 is currently being worked on
5.what are advantages of kernel 3 ?
Nothing much that you can feel
Basically related to stability, security, and future Android Os updates can easily be done for a310e
5.where are the links to kernel 3 ?
Look down
6.what's not working in kernel 3 ?
1.Ext4+kernel 3+mount2SD/s2e/link2SD doesn't work.
2. CPU states file reading ~fixed in overclocked kernel ~fixes yet to be fully implemented across RomS [overclock may cause burnt nand/recovery ]
With cm9
1.Firewall
2.USB tethering
3. Wi-Fi hotspots
4.Vpn
Anything related to iptables
With cm10
Known issues
Ext4 cannot be mounted?
Temple run 2 and subway surfers reboots*fixed in overclocked kernel *burnt nand *
7. What's not working in kernel 2 ?
garuda v5
Data usage option in settings in jelly bean.
8.what's not working in kernel 2.6 sakindias cranium kernel?
Build #2
Lag
Build #3
No support for Android native a2SD
Build #4
Same as build #3,but advertised as faster
9. I wanna make my own kernel?
Special thanks to bhargz16
http://forum.xda-developers.com/showthread.php?t=2114594
10.Is there a overclocked kernel?
Yes
http://forum.xda-developers.com/showthread.php?p=38098604
11. How to Flash kernel? Do I need to clean install?
No need to clean install
Copy zip to root of /SD card
Go to recovery
Install zip from SDcard
Choose the correct zip
Install
Reboot
Go back to main ^|^

Re: [faq][newbies only][mini edition]
/Recovery(5 MB Max )
First thing to do after root is to make a nandroid backup.
Go to backup and restore and select backup
1.what is this partition?
It contains your recovery
2.what is recovery?
It's a specialized partition for Android, which is used when something goes wrong.
We use it to change (flash) Roms, change kernels and mostly everything in xda. Make nandroid before you mess up
3. What are the recoveries available for a310e ?
1 .yannou90 (cwm5) recovery
2.Twrp 2 .3 by cute prince
3. twrp 2.2 by oblikas
4.cwm6 by sakindia
5.*OFFICIAL *The latest TWRP by bhargz16( http://forum.xda-developers.com/showthread.php?t=2123503 )
6.cwm6 by nihar.g
Links .check index link in top post
4. Are all of them stable?
The 1 and 5 are pretty stable.
What's not working:
cwm6 by sak let me down big time .
http://forum.xda-developers.com/showthread.php?p=38734554
Except 1,all other recoveries will not show charging animation, when you are charging your phone after switching it off ~instead of charging animation ~you'll be going to recovery
twrp official - some problems with ext4 partition has been reported and also reported to have been fixed. -I never had the problem before and after and I recommend this one 2.5 present here in xda.
twrp cute prince has issues restoring backups (problem with symlink )
5.what's the difference between them?
cwm5 - complete backups of all partitions
twrp - support compressed backups /file manager and other great things
cwm6 - your SD ext partitions will not be fully backed up during subsequent backups,but only the changed files greatly reducing the size of subsequent backups
6. Can you explain more about cwm ?
http://forum.xda-developers.com/showthread.php?p=38100620
7. Recommended apps.?
Recovery file manager aroma 1.8
8. How to flash a recovery?
Two methods described in detail in link above by bhargz16 ~ fast boot
Flash from phone:
Required:
Flash_image binary
You can flash any recovery
From terminal using
Code:
su
flash_image recovery /sdcard/recovery.img
You need recovery.img (renamed like that ) present in /sdcard itself
9. Error while restoring .Androidsecure /sdext ?
http://forum.xda-developers.com/showthread.php?p=39874898
10. Cannot go to recovery /burnt recovery /unable to flash recovery?
Use
Code:
fastboot boot recovery /sdcard/twrp5.img
or
Code:
fastboot boot recovery.img
or
Code:
fastboot boot /sdcard/twrp5.img
You need twrp5.img or recovery.img present in /SDcard and renamed like that itself.
After booting into recovery, you can do everything you please. ~flash erase format and install new Rom and boot the device
After booting up the device, flash erase mtd1 through terminal emulator.and then flash a suitable small recovery. And then pledge here that you'll never overclock ever again.
Go back to main ^|^

Re: [faq][newbies only][mini edition]
/SYSTEM (235 MB Max )
1.what is it?
Here's where your Rom resides
Any cyanogen /ever/miui roms all go here
2. What are system apps
Any app in /system /app is system app and they have special permissions
2.1 how to make a app system app?
Uninstall the app with titanium backup and copy it's apk to system/app(normal delete apk will not delete. Dex and lib files ) ~reboot ~
Some apkS need it's library file also in /system /Lib (copy from /data /Lib to /system /lib )
3.what is binary?
These are executable ~very important files in /system /bin. (or /xbin in recovery)
Your root su is here
4. What are the roms available?
Many roms are available in xda
Main line ones are
CYANOGEN 7
CYANOGEN 9
CYANOGEN 10
Cyanogen 10.1
Miui
5.What is cyanogen 7 ?
It's a cyanogen version of gingerbread
9 is ics
10 is jelly 4.1
10.1 is jelly 4.2
5.1 what's the development going on?
cm7 *camera was unable to be fixed *development stopped
cm 10*active development now *
cm 10.1 *thread closed *
6. How to install a new Rom? Cyanogen for example?
Download the latest build. Zip and put in the root of /sdcard.
Go to recovery
Factory reset data
Wipe cache
Wipe dalvik
Wipe SD ext
Choose install zip from /sdcard and choose the build. Zip
Wait
Reboot
Go back to main ^|^

The nothing really bugs list
Welcome to THE "NOTHING REALLY" BUGS™
This is the official nothing really bugs Pico web post at xda. Its name implies that the bugs present are really nothing to some people. But to the rest, it may bother a lot. So, this post.
Here you'll find most of the nothing really bugs. All statements having "Nothing really " in bugs list directs here. This is to inform new flashers of what they'll get and what they won't. To make the facts clear,so that you won't have to flash every Rom to find out all the nothing really™ bugs. After all, this is a newbie friendly thread.
Please note that though every effort has been taken to ensure an exhaustive list of all the bugs .Some may not have been stated here .If you do find a bug, which isn't stated here, please feel free to mention it here and I'll add it after being personally confirmation by me or two to three renowned senior member witnesses. Further more, some bugs here may have been fixed. You can take a look at the last edited day of this post to make sure this post is up to date. And you can mention it here,if any of the information found here is wrong.
1.What doesn't work in cm10 4.1 Jelly beans ?:
1video (video recording with some third party apps~Skype video messaging, zoom camera ,camera magix and a lot more)(S. ucam works fully)
2Bluetooth headphones can't be used during call(try using sound about )✘
2.1 Bluetooth stereo headphones ✘
3vsync
4.stock camera force close often and unstable (S. Camera 360/ucam)
5.Wi-Fi unable to turn on ~from settings /notification bar. (s:Flash kernel 2.6)
6.burnt nand
7. Wi-Fi direct (native )causes reboot. (S. 3Rd party app ~fast file transfer)
8.some VOIP~{ex:gtalk(even after normal gapps),and many more}
9.Most streaming video{not flash, but those, which open in mx} doesn't work. Most TV apps don't work (not flash using tv apps)
10. mobile data may fluctuate for some(timedo app to turn on and off airplane mode for every hour)
11. calls robotic call for some
http://forum.xda-developers.com/showthread.php?p=32997468
12. Unofficial adobe flash is flickering too too much. (Only Firefox actually works with flash..which flickers unbearably ~the rest don't even work )
13. Headphones volume control during in call✘
14.USB tethering (native)✘
15. Wi-Fi hotspots work only as open source ✘
16.Bluetooth A2dp streaming ✘
17.Firewall rules don't stick, when put in init.d. Somehow the Rom process overtakes the firewall rules during boot and during some process. My intuition directs the blame at bandwidth controller| throttle service~|Data usage settings|which wasn't implemented properly, but using dirty hacks
18. USB mtp and ptp not working at all. USB mass storage not working for certain devices ~double mounting. (s.flash kernel 2.6 with USb mass storage fix here. )
19. Multi mount SD app doesn't work [s.flash kernel 2.6]
OTHERS
1. Battery drain
2.Phone heating
3.WiFi toggle
Total :22[Because, I used this Rom for a long time,so the large number]
✘- Unconfirmed by me .The rest are personally tested and confirmed "not working " and again confirmed to be a problem of Rom itself.
2.What doesn't work in cm9 ?
forum.xda-developers.com/showthread.php?p=35756952#post35756952
2VIDEO PLAYBACK doesn't work as well as stock
3 Wi-Fi toggle in latest RomS
4 Bluetooth stereo headphones ✘
Experienced by some:
A. Encryption doesn't work (crypt)✘
B.robot call http://forum.xda-developers.com/showthread.php?p=32997468
C.mobile data flickering
Note: video playback is much better in cm10.
Language rendering is also much better in cm10.
3.what doesn't work in Original HTC STOCK ROM?
A. if you ever click "reset to default" in the Camcorder settings..,all future video recordings will overwrite already taken videos and all previous videos will be lost(use ucam)
B. sending a more than 150MB file on Bluetooth file manager app through Bluetooth will reboot your device.
(use stock transfer)
3.1 what's not working in a rooted stock Rom?
(make a nandroid backup first to protect you)
Optimize storage in storage settings
Factory reset will put you in bootstruck.
4.What doesn't work in cm10.1 ?
Camera and lot more minor/major
Too long list
Will update when usable
5.what doesn't work in cm7 ?
Camera
6.what's not working in kernel 3 ?
1.Ext4+kernel 3+mount2SD/s2e/link2SD doesn't work.
2. CPU states file reading ~fixed in overclocked kernel ~fixes yet to be fully implemented across RomS [overclock may cause burnt nand/recovery ]
3.Wi-Fi toggle from notification bar /from settings
4. USB mtp and ptp not working at all. USB mass storage not working for certain devices ~double mounting.
5. Multi mount SD app not working.
With cm9
1.Firewall
2.USB tethering ✘
3. Wi-Fi hotspots ✘
4.Vpn ✘
Anything related to iptables
With cm10
Known issues
Some partitions [?Ext4] cannot be mounted
*burnt nand *
With latest cute prince kernel [power management fix ]:
Mounting of SDcard on some devices
Multimount SD app
7. What's not working in kernel 2 ?
garuda v5
Data usage option in settings in jelly bean.
8.what's not working in kernel 2.6 sakindias cranium kernel?
Build #2
Lag
Build #3
No support for Android native a2SD
Build #4
Same as build #3,but advertised as faster
9. Sense4 Roms
1.Burnt nand ~most common ✘
2.Random reboots ✘
3. WiFi direct. ✘
4.Bluetooth headphones ✘
Go back to main ^|^
✘- Unconfirmed by me .The rest are personally tested and confirmed "not working " and again confirmed to be a problem of Rom itself.
S - probable third party solutions
Solutions for burnt nand -Please go to burnt nand section.

[COLOR="RED"]Welcome to [b]▶LâTêS†↭ⓛⓘⓝⓚⓢ™◀[/B][/COLOR]
Welcome to ▶LâTêS†↭ⓛⓘⓝⓚⓢ™◀
Not sure whether it'll be updated,but galaxyfreak released a app on latest Roms ~ http://forum.xda-developers.com/showthread.php?p=38913186
Why this post ?
Because index has only thread links and sakindia123 never updates op
If he does, then this post will not be updated anymore. Other than that, here are some kernel links as well. Other than the main line ones, the others are not updated. Sense4 links are already present in op and here as well http://forum.xda-developers.com/showthread.php?p=40111838 . Any link that's not present in op will only be updated.
1.what's the latest build on cyanogen 9?
Build 13
http://forum.xda-developers.com/showthread.php?p=36626369
#14*beware of burnt nand *
http://forum.xda-developers.com/showthread.php?p=38770875
2.what's the latest build on cyanogen 10 ?
Build 3.2.2.use with kernel 2.6
http://forum.xda-developers.com/showthread.php?p=38183817
Liverpool fan latest 3.2
http://forum.xda-developers.com/showthread.php?p=38447868
Beta 5~beware of burnt nand ~
Video fix by bhargz*liverpl 4 beta5*
http://forum.xda-developers.com/showthread.php?p=39124906
http://forum.xda-developers.com/showthread.php?p=39090779
Beta6~beware of burnt nand ~
http://forum.xda-developers.com/showthread.php?p=39166124
+
http://forum.xda-developers.com/showthread.php?p=39804373
(Flash this to prevent overclock)
Lock screen fix for both beta 5 and 6 .
http://forum.xda-developers.com/showthread.php?p=39043840
2.1 Aokp build link
http://forum.xda-developers.com/showthread.php?t=2208242
3.what is the latest build on cyanogen 10.1 ?
Alpha 3
http://forum.xda-developers.com/showthread.php?p=38094629
Alpha 4
http://forum.xda-developers.com/showthread.php?p=38325531
4.what's the latest build on kernel?
Old Kernel 3
http://forum.xda-developers.com/showthread.php?p=36572115
Kernel 3 v2 only for sense
http://forum.xda-developers.com/showthread.php?p=38466559
http://forum.xda-developers.com/showthread.php?p=39730163
Kernel 3 v2 for cm10
http://forum.xda-developers.com/showthread.php?p=39737920
http://forum.xda-developers.com/showthread.php?p=39804373
5. Is there a overclocked kernel?
http://forum.xda-developers.com/showthread.php?p=38098604
kernel 2.6=garudav5kernel
6. Kernel 2.6 for JB ?
http://forum.xda-developers.com/showthread.php?p=37649737
http://forum.xda-developers.com/showthread.php?p=36303556
7. Kernel 2.6 for ics?
http://forum.xda-developers.com/showthread.php?p=35797210
http://forum.xda-developers.com/showthread.php?p=36526379
http://forum.xda-developers.com/showthread.php?p=37550173
8. Side effects and solution of using kernel 2.6 on a kernel 3 based Rom:
http://forum.xda-developers.com/showthread.php?p=39452607
Basically, USB storage may not work.
To, make it work, Flash the fix attached with this post(don't remove battery @ any stage:sly-tested on my twrp 2.4.4 with cm10beta5.May not work with ics.
Alternatively, you can use multi mount SD app /root tool box lite app.
Attached zip md5: 8216eaf4a357b9cddc5cfd29b8d05a50
Attached zip sha-1: 408a075479745fe1713f8c55a968801f7f6160dd
Some more links :
http://forum.xda-developers.com/showthread.php?p=40964578
Super wipe zip
http://forum.xda-developers.com/showthread.php?p=38338418
Nand recovery procedure:
http://forum.xda-developers.com/showthread.php?p=38098622
tk to akshatshenoy.
Flashing an older ruu:
Not recommended @ any stage
http://forum.xda-developers.com/showthread.php?p=38694608
Even if it works,you might have problems data, battery drain etc.. if you Flash a wrong radio
KERNEL RAMDISK exchange on Android itself:wip
AUTORAMDISK™ EXCHANGE PROJECT alpha™
http://forum.xda-developers.com/showthread.php?p=40035607
How to install kernel? Clean?
http://forum.xda-developers.com/showthread.php?p=38098513
QUESTION NUMBER 11 ABOVE
Go back to main ^|^

Re: [faq][newbies only][mini edition]
/DATA (150 MB )
1.WHat's this?
It is the internal memory
2.Why is it important?
Because this is the place where all the apps go
No /data = no more apps
3.what's our available internal memory?
150 MB
User available 90 MB
4. Any way to increase internal memory?
By scripts
5 .Recommended apps to diagnose application not installed
Diskusage app
Log cat
6. What does a app contain?
App when installed splits into apk dex,and data(lib+data) files
Go back to main ^|^

Re: [faq][newbies only][mini edition]
SCRIPTS
Before we start, a app when installed takes space as three parts.
They are apk,dex and data (lib+app data)
All scripts work by symlinking
1. What are the scripts available for our explorer?
Partial scripts
A.Link2SD app
Moves apk,dex,lib~doesn't move app data
B.Root data2SD app
Need ext partitions
Moves application data2 ext
Full scripts--Need init.d support able to move fully /partially as per requirements
Links available in index
1.Mount2SD
Download from play store or from here check index
Famous for it's stability and frequent updates
Issues +
2. Int2ext
As per script, moves partially /fully .
Has a large user base
issues ++
3.s2e
Moves fully.
Issues +++
NO official version for jelly beans.
4.a2sd darktremor
Issues ++++
However works pretty well with stock Rom and jaggy Rom
Discontinued
5.ungaze script
Issues +++++
I don't recommend it.
Why not?
Because
http://forum.xda-developers.com/showthread.php?p=33750812
http://forum.xda-developers.com/showthread.php?p=31915607
1.1 mount2SD doesn't work? Script not executed fully @ boot?
Flash kernel 2.6 from above and you should be good to go.
2. How do I increase internal memory (literally ) from 150 MB to 2GB(for example SD ext )?
Use mount2SD reverse mount
Use int2ext
Side effects:
As per Android rules, 10% of internal memory will be unavailable
So, 200 MB out of 2GB SD ext will be unavailable
Mount2SD also has normal moving methods ,which will make Android think you'll have 150MB but you can fill up 2GB inside of 150 MB (Here 10% would mean 15 MB)
3. I installed d2ext/similar ,I'm not able to install more apps ,even though I have more SD ext space?.
A. First make sure you don't hit 10% data limit described above
B. Use diskusage app to determine,which partitions are full
For example- some scripts don't move dalvik and so dalvik will fully accumulate in /data creating no space.
C. Fix permissions from recovery, wipe cache and dalvik and reboot.
4. My Rom doesn't have init.d support /I'm using stock Rom?
Check index
You can add init.d support by
Flashing custom kernel (cranium)
Flashing scripts to make init.d support (or pimp my Rom app[not tested])
5. Where to add scripts before flashing Rom?
Add it in /system/etc/init.d (permissions are rwx rwx rwx ,if you're adding this in recovery after flashing )
For mount2SD add configurations folder in /data/m2sd.
6. How to migrate from link2SD to mount2SD?
http://forum.xda-developers.com/showthread.php?p=38840247
7. Is there a full script so that I can use both my internal memory and SD ext?
A bit complicated, but this what I use...
Configure mount2SD
To move both apk and dalvik
Don't move data.
Then open titanium backup to move app data
@First move one app data to create data2SD directory.. then you can batch move whatever apps you think fit.
But please make sure you have at least 10 to 30 MB in /data and in/SD ext (SD ext not necessarily ) before a nandroid backup. Otherwise restoreS will not work.
Go back to main ^|^

Re: [faq][newbies only][mini edition]
Common issues with scripts:
0. Device stuck @ HTC logo with 4 error icons on all four corners
Since you flashed an ruu and failed user data fail etc.
Unlock bootloader if possible
Flash twrp recovery again
Code:
fastboot flash recovery.img
Then go to recovery with this command
Code:
fastboot boot recovery
Now that you're in recovery wipe everything, format everything .
If flashing failed /you can't enter recovery, do this keeping twrp recovery.img in /SDcard
Code:
fastboot boot /sdcard/recovery.img
Do cute prince recovery procedure shown in burnt nand section
Flash erase mtd3 as well
Now Flash your Rom and boot
If it doesn't boot, repeat the whole procedure above and now
Do ruu.
If all the above failed,
http://forum.xda-developers.com/showthread.php?p=39181288
Read the above thread fully. That's the last resort.
Moral : Don't ever Flash an RUU (if you haven't already )
You can Flash stock Rom ~safer
1. Device struck in HTC logo
Wait for 15 minutes
Try pulling out battery and reboot
Update busybox and try installing scripts again
Convert your partition to ext3
Change your kernel to 2.6
2. Mount2SD ~apps update after every boot?
Turn cache off in app
Turn safe mode off
Clear cache and dalvik ~fix permissions ~reboot
Common issues after flashing:
1. I get status 7 error?
Open archive with Bluetooth file manager and check archive integrity
Try different compression method(thanks hpsgill)
Delete system apps
2. I get status 0 error?
Update binary used is different
Exchanged update binary from a working zip to this one
Other errors can be cured by changing recovery .
http://forum.xda-developers.com/showthread.php?p=38469360
Common issues after flashing Rom:
1. Always do a clean install
To wipe everything except /sdcard.
Even in /sdcard delete Android /data after backup
2. No I won't listen. I want to do you a dirty install. Show me how?
Your choice
http://forum.xda-developers.com/showthread.php?p=35903694
3. I get force closes of all apps?
Dalvik problem.
Clear cache and dalvik cache and reboot
4.I get force close of a specific app?
If it's a paid app, then you need to change your Android id to your original Id with Android id changer /titanium backup
Not a paid app?
Clear cache and data of that app and reboot
Fix permissions
5.reboot after reboot?
Thanks bhargz16
Kernel problem. Change kernel
GAPPS:
1. This gapp always force closes?
A. If it's a gapp found on play, just uninstall that gapp from system using titanium backup and then reboot and install from play store.
B.if not found on play, then try flashing a different gapps version from goo.im .
Make sure you have enough space on /system and on /cache before flashing and then flash. If not delete unused apps like stock keyboard ,etc
2. RPS5~AEC0/927/any other error while downloading apps from play?
A. Clear data cache of play store app
Reboot
B. Clear data of google services framework
Reboot
C. Remove your google account and re add it. Reboot.- this worked for me.
3. All my apps are missing from installed apps in play?
Wait for some time,if you've flashed a new Rom
Clear data and cache of play store
Reboot
Download app eric market fix *use @ your own risk *
Repeat the solution of questions 2.
Go back to main ^|^
Part 2 on next page :thumbup:

Re: [faq][newbies only][mini edition]
CPU:
1.Can you overclock?
IMO,
All overclocking burns nand.
It's just a matter of sooner /later.
Read this post before attempting anything
http://forum.xda-developers.com/showthread.php?p=38445346
Burnt nand recovery procedures here ~~the third post below this post
http://forum.xda-developers.com/showthread.php?p=38098622
The links below are old. All latest Roms come with overclocked burning kernels.
cm10:
http://forum.xda-developers.com/showthread.php?p=38189883
cm10.1:
http://forum.xda-developers.com/showthread.php?p=38336080
gpu oc
http://forum.xda-developers.com/showthread.php?p=38331698
cpu oc
2. Governors ~what are they?
As the name says they govern when the cpu should go to higher speed and when they should sleep
Performance governor always keep your phone at Max
Powersave keeps your cpu always at low
USB :
1. Flashed kernel 3 and USB doesn't work.?
Flash kernel 2 back.
2. I want to know how to fix USB +kernel 3?
Don't know
3. Can I have usb otg ?
No, not yet.
SCREEN AND POWER BUTTON and soft keys:
1.SCREEN turns on after turning off ?
A. Some apps are trying to make screen on. After screen turns on, go to settings immediately and open running applications, you may be able to find the culprit. It's probably the app, which is restarting. Some apps like lock any app screen etc. Logs could be helpful.
B. Some users reported it could be a hardware problem -look below for power button issues.
C. Some users reported it could be a script problem (rare )
2. My home screen button and /or search buttons doesn't work?
A. Did you do a dirty install of new Rom
Clear cache and dalvik and fix permissions and reboot
B. Copy com.Android.providers.settings /databases from your previous nandroid backups(use yaffs file manager /nandroid manager)and paste it in it's respective location now (paste it using file manager in recovery )
C. If that doesn't work, clean install again
Tech savvy? ~search for device provisioned 1 in cyanogen forums
http://forum.xda-developers.com/showthread.php?p=38633404
3. Power button doesn't work properly ?
A. If it's not a software problem(try the above solution first),then you broke it.
If you broke it, avoid using the power button anymore-use attached scripts indeed.
There are apps in market to simulate power keys.
Or
http://forum.xda-developers.com/showthread.php?p=38633404
Go back to main ^|^

Re: [faq][newbies only][mini edition]
Miscellaneous topics:
Subject to change without prior notification
Developers:
1. Who are the developers that make these roms?
1. Cute_prince
2.sakîndia123
3.derefas
4.lirokoa
5.liverpool fan
6.bhargz16
7.nihar.g
8.ngolralph
And many others. The above are the developers of the roms that I used and present in no order.
2. Why doesn't sakindia123 update the OP ?
Disclaimer: Since it is one of the most faq by newbie,I'm forced to discuss here. I personally do not know sakîndia. If you still want more info, contact senior member hpsgill
You see.. He does nothing without reason. If he doesn't, then the last build present in op will be more /less equal to the latest build. There are other reasons ,which if I had to speak of them all, time wouldn't let me and I would have to deal with flaming members and mods and deleted posts and locked threads . Furthermore that question is well out of the scope of this thread. You are instructed not to ask this question any where.
YOU HAVE BEEN WARNED.
3. How can I contact these developers?
You can by studying Android development and codes, bccms,404s,tr2s and then talking to them. You'll have better luck talking with non recognized developers than the rds.
And try discussion threads .
4. Why doesn't a developer answer my question? (I'm being polite here)
Because the developer doesn't know the answer
w.r.f to http://forum.xda-developers.com/showthread.php?p=38095857
Or your question has already been answered. Try searching for your question at the least 10 pages back.
or your question is too silly to answer
Or your question is not seen ,because they don't have time .
5. Why do they do this ?
For passion of development, addicted, and for learning purposes.
So, that means they don't work for you. They don't help you. They do what they want.
6. I feel a emptiness around forum members. Was there a developer who worked here, yet left without goodbye?
Well not sure about goodbye, but yes his name is jaggyjags.
sakIndia123 came only late and his first work his cranium kernel, which he abandoned like it was nothing.. buried it along with jags. Cruel things did happen before you were here.
Go back to main ^|^
Members:
1. Why won't members answer my question?
Again, thanks to bhargz16
http://forum.xda-developers.com/showthread.php?p=38095857
Or question has already been answered over and over again. Try searching for your question and read at the least 10 pages back.
Or they don't want to help you
Or may be you aren't polite
Or they want thanks
2. Why do they want thanks?
You see.. you should hit thanks for them in order for them to reply
3. Why hit thanks?
Because they are thankaholics .
This addiction
Some call it want,
For some it's need
Some call it greed
And some call it hunger
And some childish foolishness
Never hit thanks, unless you mean it. Never sell yourself short. Mean it, then hit it.
http://forum.xda-developers.com/showthread.php?p=32867800
My first thread closed by mods
:crying:
Having said that, please do be grateful for what you receive. Hitting thanks is like giving a eternal reputation mark on them rather than just saying it. Saying just makes a temporary mark. Get it. 
4.what is spam?
Spam is going out of topic . It never should be done in dev threads unless thread is dead.
Some do the work of mods pretending to be mods.
5.who are mods?
They are moderators who have power to ban anyone at will (in short )
And they are losing patience
http://forum.xda-developers.com/showthread.php?p=37950595
6.Can I spam here?
Feel free to speak what you want..
7. If I feel something wrong is going on /flaming /threatening, who should I report to?
You can use the report system~that (!) mark over every post. Click it and your issue will be resolved within a hour(probably ).
Go back to main ^|^

[color="red"] [b]
0110…380“30…4010¨¨1WELCOME TO NAND/recovery BURNT ZONE 0110…380“30…4010¨¨1
0„30†2Moved by touch0160†640„30†3Inc.
0110…380“30…4010¨¨1DON'T FLASH AN RUU AT ANY STAGE 0110…380“30…4010¨¨1
0. What's burnt nand?
It's condition caused by overclocking(oc)[CPU oc ,to be specific. For gpu oc,go to the last part of this post question 10 ] resulting in bad blocks all over your system, data, cache and recovery.
Important: Use diskusage app to determine size. Don't go by phone's inbuilt settings
A case of burned /system partition in cm10 beta6 running overnight:
Uploaded with ImageShack.us
A late case of burnt nand of /data :
Uploaded with ImageShack.us
1 &2:Not applicable anymore. Peace!
3. No one has burnt thier nand*it's just some people think that thier nand is burnt * is this true?
Well, I'm sure, going through the forums and q &a ,I know that people have indeed burnt thier nands and some just by using the overclocked kernel without even overclocking.
Sources:
http://forum.xda-developers.com/showthread.php?t=1847002&page=400
http://forum.xda-developers.com/showthread.php?t=2243719
http://forum.xda-developers.com/showthread.php?p=39985385
http://forum.xda-developers.com/showthread.php?p=39799173
http://forum.xda-developers.com/showthread.php?p=39439861
http://forum.xda-developers.com/showthread.php?p=39428922
http://forum.xda-developers.com/showthread.php?p=39402187
http://forum.xda-developers.com/showthread.php?p=38941663
http://forum.xda-developers.com/showthread.php?p=39216556
http://forum.xda-developers.com/showthread.php?p=38945489
http://forum.xda-developers.com/showthread.php?p=39197918
http://forum.xda-developers.com/showthread.php?p=39169697
http://forum.xda-developers.com/showthread.php?p=38657723
http://forum.xda-developers.com/showthread.php?p=40616272
http://forum.xda-developers.com/showthread.php?p=39331139
But below is a strong correlation with bad block proof between overclocking and burnt recovery. Yes it burns recovery too.
http://forum.xda-developers.com/showthread.php?p=39196574
THE ABOVE LINKED POSTS ARE MOSTLY SOLVED BY ME OR SENIOR MEMBER S, BUT SOME HAVE LOST THEIR DEVICES. IF YOU CAN'T FIND THE ANSWER HERE, I SUGGEST YOU READ ALL THE LINKED POSTS-VARIOUS DIFFERENT METHODS HAVE BEEN EMPLOYED.,WHICH ARE TOO LONG TO EXPLAIN HERE. READ AND READ-YOU'LL FIND.
4. What are the symptoms of burnt nand?
Early symptoms:
You'll notice a strong drop in your free space in /data
Late symptoms:
/data free space is Nil /below 50%of what you saw before
Error in /cache /recovery/log.
Error in /cache/recovery/last log.Not readable.
No apps can be installed
Rom lags like hell
No Rom can be flashed /boots
Previous nandroids ,which are successfully restored before fails to restore now.
Really abrupt and fast restores with twrp
RUU cannot be done ~user data(mtd5) fail. System fail (mtd3)
5. How can I diagnose burnt nand early?
If you suspect burnt nand ,
1.Watch out for free space in /data and watch out for sharp reduction.
2.Download this app Disk Usage and watch out for increase in system data in /data
http://forum.xda-developers.com/showthread.php?p=39464989
3.Make a dmesg and look for these errors
http://forum.xda-developers.com/showthread.php?p=36834988
4.Definitive method is this :
shahrooz_ra said:
hello
is there any linux terminal command for check badblock on nand memory?
Click to expand...
Click to collapse
1.DOWNLOAD THE TERMINAL.ZIP ATTACHED BELOW
2.EXTRACT TERMINAL.ZIP INTO /SDCARD/lol [create a folder named lol[small letters ]in SDcard, if there already isn't one ]
3.Open terminal emulator on your phone
4.type or copy and paste this code and press enter
Code:
su
cp /sdcard/lol/runme.sh /r.sh
chmod 0755 /r.sh
/r.sh
5.if it doesn't work first time, paste twice.
6.If pasting twice doesn't work, type each code one by one -you'll surely get it. Come on-its just 4 lines -type it lazy!
And Now you'll see the number of bad blocks you've got.
You can also Flash the zip below[for which you have to go to recovery ]or execute the attached script badblocks.sh as root.
6. What are the parts affected by burning?
Proved to affect
/Data
/system
/cache
/recovery
Rest is unknown
7. Ok I managed to burn my nand What are the recovery procedures available?
I SIMPLIFIED THINGS HERE BY MAKING A FLASHABLE FLASH_ERASE. ZIP[Code named FLASH_ERASEmadeflashablebyBANNED.zip ] it works with twrp2.5 to flash_erase needed partitions. However not tested fully. Problem? Post here.
Other long procedures:
Cute prince recovery procedure:
http://forum.xda-developers.com/showthread.php?p=36868966
I think Cute prince missed this .Just add this at the end
Code:
./flash_erase -N /dev/mtd/mtd3 0 0
7.1 I GET FLASH ERASE NOT FOUND?
Flash the flash_erasemadeflashablebyBANNED.zip
Derefas recovery procedure:
derefas was the one who actually gave the idea of recovering nand
http://forum.xda-developers.com/showthread.php?p=36867557
Sachin Thomas recovery procedure
Developed lately *can be done on phone itself */if it didn't involve recovery /*
http://forum.xda-developers.com/showthread.php?p=38941897
Recovery recoveriNG procedure (bhargz16)
http://forum.xda-developers.com/showthread.php?p=39198068
8. I can't find my answer here?
Go to official burnt nand discussion thread
http://forum.xda-developers.com/showthread.php?t=2183130
Or you can ask your questions here.
9.can I Flash any other kernel to prevent overclocking?
You can Flash garuda2.6
Link in latest links post page 1.
http://forum.xda-developers.com/showthread.php?p=38098567
Side effects:
http://forum.xda-developers.com/showthread.php?p=39452607
10. Some more links:
Unknown recovery procedure
http://forum.xda-developers.com/showthread.php?p=36836090
MTD status report:
http://forum.xda-developers.com/showthread.php?p=36837173
11. Cannot go to recovery /burnt recovery /unable to flash recovery?
Not sure of the exact command,but will work.
Use
Code:
fastboot boot recovery /sdcard/twrp5.img
or
Code:
fastboot boot recovery.img
or
Code:
fastboot boot /sdcard/twrp5.img
You need twrp5.img or recovery.img present in /SDcard and renamed like that itself.
After booting into recovery, you can do everything you please. ~flash erase format and install new Rom and boot the device [do ruu here, if you haven't been able to enter hboot before]
After booting up the device, flash erase mtd1 through terminal emulator.and then flash a suitable small recovery. And then pledge here that you'll never overclock ever again.
12. GPU OC ?
gpu oc has been reverted along with CPU oc by sak for burnt nand. But may be added later. but not present in cm released on or two months before 9 may13.
12.1 is it safe?
I don't know. CPU oc did provide burnt nand and bad blocks. Gpu oc may also do some things, which may not be seen as of now. I've seen one case complaining that, after using Cyanogen and going back to stock - games started lagging, which did not lag, when he was in stock before. The reliability is doubtful. But not much people go back to stock either -so not much can be said.
12.2 do you recommend it?
"If any provider of any oc removes the "AS IS" tag and take responsibility,if something happens, then I'll probably may use that oc,otherwise count me out".
12.3 How to remove gpu oc ?
Its present in kernel. Flash another kernel. Or modify source and compile yourself.
Present at arch/arm/mach-msm/msm7x27a.c- kernel source.
Try here
Normal [bus, Gpu] is [0,133330000],[160000000,192000000],[200000000,245760000] I think.
13. Was there anyone unable to recover and lost thier device for ever?
AFAIK,
"The lost thier device for ever list RIP "
Ghostking
Hawk378
And May be many more
Legend *:
Attachment list:
***********************************************************VERY IMPORTANT : UNDER CLOCK BELOW 300MHZ ,IF YOU ARE USING ZIPS WHILE SYSTEM IS RUNNING.AFTER THE TESTS, YOU MAY OVER CLOCK AS YOU WISH. ********************************************************************************************
Provided "AS IS"
1- script to detect badblocks by banned.
2-flashable zip to detect badblocks by btfb0
3-Terminal method to detect bad blocks by banned .
4-flashable zip to detect bad blocks by banned.
5- Recovery procedure to delete bad blocks- Made flashable by BANNED.
All zips posted here has readme.txt files inside it-which are self explanatory to that particular zip.
*USE AT YOUR OWN RISK*

Re: [faq][newbies only][mini edition]
I have a question not answered here?
Post your question in the q&a section after making sure that your question hasn't already been asked.
Please use search button on the top right to make sure that your question hasn't already been asked. And it'll help you to find more answers.
Follow detailed instructions here
http://forum.xda-developers.com/showthread.php?p=33608527
And post with logcat increases your chances of resolving the problem
ADB
What is logcat and ADB?
Special thanks to akshat.shenoy
http://forum.xda-developers.com/showthread.php?p=37805872
He'll explain things better
Basics of ADB:
http://forum.xda-developers.com/showthread.php?p=9936674
Partition and wipe SD ext with ADB:
http://forum.xda-developers.com/showthread.php?p=38706881

Re: [faq][newbies only][mini edition]
reserved

Re: [faq][newbies only][mini edition]
MINI Tips and tricks:▶?
1.How can I apply cm9/10 themes?
http://forum.xda-developers.com/showthread.php?p=35530897
Download the zip from here, read instructions there and flash it in recovery
Now you can use any HDPI themes on your Pico
Thanks ngoloralph
2. How do I change fonts?
Download Rom toolbox lite and go to font installer;
A. If you're on stock, the rest is automatic
B.if you're on cyanogen 9/10/11,if you change the droid sans /others as recommended by app, you'll end up in boot loop (possibly because of symlinking of robot sans & droid sans )
In such a case go to preferences and click to overwrite only roboto regular font and everything will be fine.
Take a look
Uploaded with ImageShack.us
3. How do I add a new language support to my device?
Note: no new language gui can be added by this method. This only adds support. Instead of seeing boxes, you may see your language. If you want full language support, you can go to this abandoned thread.?? http://forum.xda-developers.com/showthread.php?p=40890599 ??
Language support can simply be added by adding a Android supported language font file in /system /fonts and give it permissions rw r. r.(font files can be found all over xda )
Step 2. Open system /etc /fallbackfonts.xml...
There should be a lot of font file names there.. just delete a font name that you don't want and add your font file name (the name of the file which you put in /system /fonts)
In there.
Practice makes perfect.
This method however doesn't work /only partly works for complex languages /script like Hindi Arabic etc.
DID YOU KNOW?
1. Long pressing reboot button (in the menu after pressing power key) will get you into safe mode
2. Long pressing power keys and volume keys + and- for more than 30 seconds will reboot your device (tk to hrkh83)
3. Repeatedly pressing certain options(like Android version) in the about menu in settings(on cyanogen ) will take you into different settings (tk liverpoolfan)
Go back to main ^|^

Battery drain
BATTERY DRAIN
Of course, we're gonna talk about drain.
Before we start, I want to disprove some prevalent concepts
1. Battery calibration
It is supposed to increase Battery capacity and increase Battery life and it makes your phone to show the correct Battery on the notification bar.
FALSE
It doesn't do any of those. Calibration is just deleting Batterystats.bin file. That file holds info about how many seconds each apps were running for.typically it's blameometer. It shows the information you see in the battery chart in your settings. Nothing more.
Source: article
2. Cycling your battery life from 0 to 100 and 100 to 0 will typically increase Battery life. Further more you should make sure it comes to zero by turning on the phone,every time it got switched off on it's own.
FALSE AGAIN
Nothing could destroy your Li-On Battery than extreme low voltage. You can be sure that this will destroy your battery life more than anything. During storage it's recommended to keep the battery in cool place with 40%Battery.
So, don't use any battery draining app from market.
Ok, since we took out the false foundation, it's time to put some true working tips to save your battery during usage and it's overall life
1. It's recommended to charge as often as possible ~every time you get a socket. Though not to keep @100 all the time. Overcharging theoretically may damage your battery, but your phone comes with various safety mechanisms to prevent charging after that.
2. Limit the number of apps. Definitely would produce good Battery.
3. Limit the number of apps, that run in background all the time.
Typical example would be facebook.
PERFORMANCE:
4.Disable autostarts for all apps, that you don't use much~using autostart manager.
Disabling autostarts for the clock app will make you get up late. Use common sense.
This alone should drastically improve your performance
5.Use lightweight launchers ~Nova.
Go (any go products) is not advisable
6.Post ICS, Disable media scanner receiver.
You can use elixir app to disable media scanner receiver. This will scan your SDcard over and over again resulting in Battery drain,which is significant, if you use a bigger SD. Use media scanner root to enable and disable.
As far as the usual ones,
7. Disable autobrightness
8. Keep screen @ minimum brightness
9. Disable autorotation
10. Disable location services.
GAPPS:
11. Disable GSF (google services framework ) receivers ~the ones with gtalk on it.
12. Disable auto sync
You can use timedo /timer Android to turn on sync twice /thrice daily.
13. Reduce number of accounts. Better to keep single than three accounts.
14. Good internet connection. Amount of energy taken to re connect is supposed to be far more than amount needed to keep a connection.
15. Undervolt/with underclock
RECOMMENDED APPS:
1.BETTER BATTERY STATS ~free for xda.
2. Onepower guard
I haven't found satisfying results with this app, but still try it out
3.greenIFY
I haven't used this @ all.
4. Any app, that is used to reduce /increase heartbeat sent to google servers.
Well, that's all I've learnt as of now.

Re: [faq][newbies only][mini edition]
Recommended apps section (only free)
Top apps
0. Superuser by koush (Clockworkmod)
1. Titanium backup
2. Efficient backup
3. Floating logcat ~logcat extreme
4. Catlog
5. Aroma file manager (recovery use only)
6 .Es file explorer
6.1 es file explorer v2
7. Yaffs file manager
8. App extractor
8.1 nandroid manager
9. Loaderdroid
10. Xda app
11. Elixir (much useful to disable app components than it's actual use)
12. Android pro widgets(similar to HTC friendstream)
13. Nova launcher
14. Timedo
15. Live logcat lite
16. Rom toolbox lite
17. Screen stand by root(turn off screen without making phone to sleep)
18. Disk Usage
Launcher:
1. Nova
2. Apex
Downloaders:
Loaderdroid
Multimedia players:
Video
mx
bs
qq
Audio
Ttpod
Equalizers
NOOZOXIDE REWIRE PRO
Walkman sound enhancements
Awesome beats
Cyanogen Dsp(better than stock )
Equalizer from market.
Cam/corDer /video recorder:
Camera:
Camera 360
ucam
spycam
Video recorder
ucam
Zoom camera
Camera magix
Browsers:
Fast and server based
Uc browser mini
Opera mini
Opera mobile
uc browser
Puffin browser
Full fledged browsers
Firefox
Dolphin
Google chrome beta
Chrome
KEYBOARDS ?
Touchpal keyboard
mĺ has internet permisn wid emoji
Office apps:
Kingsoft office(better than paid apps)
Zip extractors:
Zarchiver(ant-one)
Screen off(w/wake lock):
Screen stand-by
File managers:
ES explorer
Fx file explorer
Call recorders:
No known call recorders are working.
Stocks:
Personal finance
Superuser:
Superuser by koush ~open source&free
Super su ~made pro free after the release of prior~closed source ~
⇧Go back to main ♠
THE END.
© All rights reserved 2013?

Autoramdisk exchange alpha
MINI ADVANCED SECTION:
KERNEL RAMDISK exchange on Android itself:wip
AUTORAMDISK™ EXCHANGE PROJECT alpha™
『Moved by touch™』Inc.
In association with
Google Nose beta™
Presents
AUTORAMDISK™ EXCHANGE PROJECT alpha™
Current version: 0.0.0.0.071 Alpha
Created with Es explorer 1.6
Created on HTC explorer Pico a310e
Update:
I have got it to work and complete
http://forum.xda-developers.com/showthread.php?p=40035607
Old post: too lazy to delete
Present condition:
Hi. I cannot get it to work on HTC Pico yet .It may work on other phones. If someone can, please feel free to complete it provided you give proper credits And you do not make money out of this.
What's this?
It's a procedure (wip) to Flash any kernel without the need to change ramdisk.
As new kernel gets released, you don't need to change ramdisk to suit your Rom.
Automated procedure:
Open any kernel.zip with any zip extractor on your phone
Copy the script below and paste it in updater-script present in meta~inf/com/google/Android
(delete any other things written there. )
Code:
package_extract_dir("bin","/tmp");
set_perm(0, 0, 0755, "/tmp/busybox");
set_perm(0, 0, 0755, "/tmp/unpack-bootimg");
set_perm(0, 0, 0755, "/tmp/mkbootimg");
set_perm(0, 0, 0755, "/tmp/dump_image");
run_program("/sbin/dump_image","boot","/tmp/oldboot.img");
run_program("/tmp/unpack-bootimg", "-i","/tmp/oldboot.img","-o","/tmp");
package_extract_file("boot.img", "/tmp/boot.img");
run_program("/tmp/busybox", "mkdir","/tmp/boot");
run_program("/tmp/unpack-bootimg", "-i","/tmp/boot.img","-o","/tmp/boot");
run_program("/tmp/busybox", "rm","-r","/tmp/kernel");
run_program("/tmp/busybox", "mv","/tmp/boot/kernel","/tmp/kernel");
run_program("/tmp/mkbootimg", "--ramdisk","/tmp/ramdisk.cpio.gz","--kernel","/tmp/kernel","-o","/tmp/newboot.img");
write_raw_image("/tmp/newboot.img", "boot");
delete_recursive("/tmp/newboot.img", "/tmp/boot", "/tmp/oldboot.img", "/tmp/kernel", "/tmp/ramdisk.cpio.gz","/tmp/boot.img", "/tmp/busybox", "/tmp/unpack-bootimg", "/tmp/mkbootimg");
mount("yaffs2", "MTD", "system", "/system");
package_extract_dir("system", "/system");
Download zip files from the source link below
Extract it and copy the bin folder from there to your kernel folder directly.
There should be 3 folders in your kernel folder ~bin folder, meta inf folder, system folder and boot.img
Now compress it and Flash
Note that this is only applicable to change ramdisk. If the boot. Img needs more work than that, it won't work. Essentially, it won't work on sense4 compiled kernels and vice versa
Manual terminal emulator method:
Alright guys, one last tutorial from me making my last mark here .This tutorial is not tested fully and probably never will be due to lack of time. And it will work for sure ~but May have syntax errors.
Credits:
1.trevd for arm executable binaries.
2.Xda university.
Requirements:
1.Any Android 2.3+ rooted
2.Android terminal emulator
3.arm executable unpack-bootimg binary and mkbootimg binaries (find it below )
History:
I wanted to change ramdisk for kernels for a long time on phone itself ~probably for a year or more . But anyone who tried to unpack using normal unzip apps would've noticed that other data.img and even system.img in clockworkmod could be unpacked easily, but not the boot.img and recovery.img. When I searched to unpack, it was easy with computers using the unpackbootimg binary for Linux. Problem was it wasn't cross compatible with our phones . So, I was searching for quite a while,until I found trev on xda university and he had made arm executable binaries for unpacking, repacking. Actually the main reason these binaries were created was for far greater and more advanced purposes i.e. to use apply patch functions in update binary and update script to Flash ramdisk on phone without flashing the kernel itself or vice versa (AFAIK)[ The apply patch functions are used in normal ota updates for any Android phone ]. Anyway I took those binaries to unpack kernels on our phone to change ramdisk. I write this for those, who want to change ramdisk on thier phone, but had no experience in PC whatsoever. And also by doing this, I share the unpack boot image binaries by trevd for Android phone ,so that any advanced member May use it for kernel updater scripts~think about it ~one zip for all cm9/10/10.1. Ofcourse the rest is up to you. Thanks for reading
Procedure:
1.Download the zip given in source below
2.Unpack it
3.Find these two binaries in /system/bin
Unpack-bootimg and mkbootimg
4.Copy them to /system/bin and give them full execute permissions in es explorer and read/write permission for user.
5.For easy remembrance,say, b1.img is your original boot image for your Rom(and Android,say cm10 ) and b2.img is the new kernel released for cm10.1
6.You want to change the ramdisk ofb2 cm10.1 to cm10 ,so that you can Flash the new kernelb2 for your cm10
7.Create new folder in SDcard named boot and put both b1.img and b2.img there
8.Open terminal.
9.type the following code one by one
Code:
su
cd /sdcard/boot
mkdir /sdcard/boot/b1
mkdir /sdcard/boot/b2
unpack-bootimg -i /sdcard/boot/b1.img -o /sdcard/boot/b1
unpack-bootimg -i /sdcard/boot/b2.img -o /sdcard/boot/b2
rm /sdcard/boot/b2/ramdisk.cpio.gz
mv /sdcard/boot/b1/ramdisk.cpio.gz /sdcard/boot/b2/ramdisk.cpio.gz
mkbootimg --kernel /sdcard/boot/b2/kernel.img --ramdisk /sdcard/boot/b2/ramdisk.cpio.gz --base 12C00000 -o /sdcard/b2new.img
rm -r /sdcard/boot
Note: the last rm command will delete all your old kernels ~don't execute it, if you don't want to have it deleted.
10.Now you have new kernel boot image with your ramdisk in /sdcard/b2new.img
11.Put it back in the zip with it's modules and
12. Flash
13.Hoping it'll work.
14.That's the end.
Source and binaries here:
http://forum.xda-developers.com/showthread.php?p=36931024
For dream and Sapphire models, you can use the binaries created by koush ~ which is found in his github ~any kernel project.
I'll probably be leaving soon
Kind of feel like working for xda. I guess sak and others would probably feel like it later. It's been great while it lasted. So this is probably my last project. If I did have some extra hardware during this period, things May have been different. It's good, while it lasted.
"The fantasy of a dream is that, it's still a dream, when it becomes reality, then it's no more a dream and the fantasy is lost. "
「Good bye xda」
So long:angel:

Re: [faq][newbies only][mini edition]
one more
The Infamous BUILD.PROP Tweaks :
http://www.jeffmixon.com/examining-build-prop-tweaks-for-android-ics-a-comprehensive-guide-part-1/
from
http://www.droidforums.net/forum/droid-4-roms/234899-examining-build-prop-tweaks.html
Guess that'll end this hoax for good.
One thing that was useful for me was this
http://www.modaco.com/topic/347274-guide-making-cm-utilise-both-cache-and-data-for-dalvik-cache/

[alert] for all scripts claiming they are supercharged

NOTIFICATION! FOR ALL SCRIPTS CLAIMING THEY SUPERCHARGE YOUR SYSTEM (OR INSTALL SUPERCHARGER v6)​​​​NOTE: Don't be confused in difference between Performance SuperCharge or SuperCharger v6 (Here its, SuperCharger v6)
There is no script (until now) in this world that can SuperCharge a system from recovery.
The thing is:
It seems that the problem with ICS, at least according to the dev, is that the OS no longer reads ADJ values out of build.prop but rather has them stored and hardcoded in services.jar, which makes this script only be half as useful as it was before. The dev has provided a nifty way to actually change these values in services.jar, and it can be done from the comfort of your Android device, thanks to a web app created to “patch” the services.jar so that the script can take effect in full force.
Click to expand...
Click to collapse
Here is proper installation steps:
===================================================================
Installation - Easy as 1, 2, 3!
1. Run the NEWEST V6 SuperCharger script as always.
Note: You may get Segmentation Fault errors running the V6 SuperCharger script on ICS due to a flakey su (superuser) binary.
To resolve the issue, you can:
A) Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
OR...
B) Go HERE and get the SuperCharger Starter Kit!
2. Patch and install services.jar - by whichever method you like best. Your options are, in order of EFFECTIVENESS:
Note: Options A, B and C require Java to be installed on your computer - Click to Verify Java Installation
Option A) Use one of the -=Ultimatic Jar Patcher Tools=- (exe or zip) which DO EVERYTHING for you "Fully Ultimatically" on DEODEX & ODEX ROMS!
Goto Step 3 if you did this!
Option B below is the next preferred method - but there's manual work involved.
Option B) Follow the complete tutorial below and use -=Ultimate Jar Power Tools=- patcher script to automate Step 5 - the actual smali editing!
There are actually 56 edits performed via script... many more than what is specified in the tutorial!
Note that the script allows you to choose the level of your Launcher's Super Strength! (BulletProof, Die-Hard, or Hard To Kill)
Also be sure to have the necessary smali files in the same folder as the script!
ODEX ROMS - ALL Stock ROMS are ODEX (I think... ) So if you have a services.odex file, press the button!
All but Step 5 is automated on Windows with a batch script courtesy of rexstor .
See [Guide][Batch][Odex Rom only!] To get another 50% v6 Supercharged script for ICS!
So you'd run the batch script, and for the editing, run my Ultimate Jar Power Tools patcher script in Step 5
Goto Step 3 if you did this!
Option C) Follow the complete tutorial below without using any Patcher tool.
This is actually pointless to do - there are less edits and it's more work And the laziest people should just do D) below lol
Goto Step 3 if you did this!
Option D) Use the latest Update 9 RC* and select ICS Service Centre's Automatic Transmission! (OUT OF DATE)
Seemless webapp integration and installation to "Lock home in Memory"
Note: This is currently out of date - latest edits and Maximum MultiTasking Mods are NOT included and it does not work on Jelly Bean!
Goto Step 3 if you did this!
Option E) ICS OOM Priority Charger webapp. Same effectiveness as D) but done manually (OUT OF DATE)
Latest Update 9 RC* can install and apply permissions via ICS Service Centre's manual mode
Important: The webapp WON'T WORK for ODEX roms! So if you have a services.odex file, you have use a more effective option above
Also won't work on Jelly Bean ROMS!
More Webapp Info
Just go to http://android.mimic.ca with your devices browser and follow instructions!
In case of upload problems: If your Android browser closes while selecting file to upload, use Opera Mini web browser because it lets you select a file from within the app. Just copy services.jar to the sdcard first
CWM zip option is available!
But if you don't get the CWM zip, and instead download the modded services.jar, you can:
A) Do Steps 8 to 10 below! But first In Terminal Emulator, just type su and enter, busybox mount -o remount,rw /system and enter (Mount system as read/write).
OR...
B) Use the ICS Service Centre's manual mode in V6U9RC*
Help for webapp: Go to http://webchat.freenode.net , channel #v6_supercharger and talk to blk_jack (or me if I'm there)
* All roms (odex & deodex) - to install a patched services.jar/odex, you can use the ICS Service Centre's manual mode in V6U9RC9+ (for Steps 8 and 9 below).
* If you ever have trouble applying permissions to services.jar/odex, just run the ICS Service Centre and permissions gets applied everytime just before returning to the main menu!
3. SuperClean & ReStart! (ie. Wipe Dalvik Cache & Reboot)
Notes: For decent launcher detection use at least V6U9 RC6.9 or newer and check the bOOM Stick to see if the launcher the desired ADJ value!
.......... - Boot will take a LONG time as it "optimizes all your apps"
.......... - If it doesn't boot (unlikely if you did the edits yourself), try wiping caches (not data)
.......... - If it still doesn't boot, you can always just re-flash your current untouched rom but do have a backup nevertheless.
.......... - If you get FCs, fixing permissions will solve that. (Use the "Fix Emissions" Option in the latest V6 SuperCharger Script! )
That's It!
========================================================
​
Go here for more info!​​

Reserved

Umm why repost the thread when we can just check the page

Yes, and there is a tutorial too in the general forum

thread moved and closed