Hello everybody,
I rooted and upgraded my T-mobile(US) SGs4G from Froyo to ICS, currently:
model sgh-t959v
firmware 2.3.6
baseband ver t959vuvkj6
kernel ver 2.6.35.7-t959vuvkj6-cl694130
build # gingerbread.vuvkj6
since this upgrade i have 2 bugs:
1. usb(mass storage mode) is not working in my car (read error), worked before OK. it's still working when i connect phone to computer. We got another SGs4g in the family (not rooted, just upgraded to GB), it's stop working in USB mass storage in the car too. Any ideas? could i replace usb driver in ICS or do i need to go back to Froyo?
2. I worked in the building with poor reception of GSM signal, so if phone could not connect to the cell, then even if i go outside later it's still "searching" and could not find signal, so i need to turn phone off/on in order to get signal.
Could it be fixed? again it was OK with Froyo: 5-10 sec and reception re-established.
Thanks in advance.
You don't have ICS. You have Gingerbread. Try a factory reset for your problems.
I did
Thanks, my bad, sure it's not ICS, its GB. And i did HW reset in the begining, do you think it's the number of resets that counts? BTW i did not back up my Froyo, do you know where i can get one?
When did you do the factory reset in relation to your problems? How did you upgrade?
Depending on your answers my recommendation is follow the guide in the second link of my signature. GB is worth having.
I can find you a link for Froyo but it is not as simple to downgrade to Froyo as you might think. You will need to make sure to flash Froyo bootloaders also.
first i did root still with froyo
then updated to GB with keos
did reset, and re-installed all applications.
I did figure out how to "trick" lost connection due to no signal:
turn on flight mode and turn in off. so definitely it's a bug.
still no luck with USB
I know that downgrade to froyo is not easy, and i like GB, this is why i'm asking if there is a way to patch usb driver only
regards
Related
The other day I updated my phone to 2.3.4 using odin. after that I had a horrible wifi signal and i kept losing my data connection all together. So I flashed back to Froyo 2.2.1. I am so confused because my phone kept force closing, I did a factory reset and it stopped but it says my kernal version is 2.6.32.9...is that normal? Also how do I go about flashing a good rom to my phone? The way it is now it is soooo slow which is why i updated to the 2.3.4...any information would be helpful as I am ready to throw my phone out the window.
pammiecaykz said:
The other day I updated my phone to 2.3.4 using odin. after that I had a horrible wifi signal and i kept losing my data connection all together. So I flashed back to Froyo 2.2.1. I am so confused because my phone kept force closing, I did a factory reset and it stopped but it says my kernal version is 2.6.32.9...is that normal? Also how do I go about flashing a good rom to my phone? The way it is now it is soooo slow which is why i updated to the 2.3.4...any information would be helpful as I am ready to throw my phone out the window.
Click to expand...
Click to collapse
Which 2.3.4 ROM did you flash via ODIN? KG4/KG6 both show less wifi signal but I actually haven't seen a difference in speed. I'm on this one right now:
[ROM] Stock Deodexed T959VUVKG4 with Root [Gingerbread 2.3.4][7.26.2011]--Whitehawkx
http://forum.xda-developers.com/showthread.php?t=1187293
The way to properly get to that is by doing the following:
1. ODIN
[ROM-Leak][ODIN] Gingerbread 2.3.4 T959VUVKG4
http://forum.xda-developers.com/showthread.php?t=1183413
2. Then boot up like normal and wait for it to load up into the system.
3. Turn off your phone again (shutdown) and put it back into download mode.
4. ODIN this to get CWM+Root http://forum.xda-developers.com/showthread.php?t=1194032 (use the ODIN version)
5. Keep lagfix disabled via the voodoo menu in recovery after you flash the CWM+root+Voodoo EXT4 package in the link in step 4.
6. Boot into the system. It's up to you, I flashed this
[ROM] Stock Deodexed T959VUVKG4 with Root [Gingerbread 2.3.4][7.26.2011]--Whitehawkx
http://forum.xda-developers.com/showthread.php?t=1187293
Which is a deodexed build which allows you to theme etc.
Some people have had issues getting onto EXT4 partitions while on a gingerbread ROM. I had a few issues myself. Needless to say there are several places to read about how to get EXT4 working on all partitions if you want to.
Best of luck, hope this helps.
Well to be completely honest, I don't know anything about partitions. All I know is that I updated my phone and then all of a sudden I had a horrible wifi connection and my data connection would just drop out all together and say "searching". I would have to reboot my phone 2 or 3 times to get it working again. What is a good rom to update to? Is have the kernal build that I do going to be an issue?
pammiecaykz said:
Well to be completely honest, I don't know anything about partitions. All I know is that I updated my phone and then all of a sudden I had a horrible wifi connection and my data connection would just drop out all together and say "searching". I would have to reboot my phone 2 or 3 times to get it working again. What is a good rom to update to? Is have the kernal build that I do going to be an issue?
Click to expand...
Click to collapse
Please read the post above and follow the steps and links and you will be fine
The other day, I got a text from AT&T indicating that an official 2.3.5 kernel was available for my Captivate. Great, so I fire up Kies mini and install it over my rooted stock 2.2.
Update goes well, I have Gingerbread. All of my apps remain in place. Re-root (SuperOneClick) and my Titanium Backup works like a charm.
However, I can't get my WiFI to connect to save my life. IT scans for about 15 seconds then shuts back off. I can't even enter WiFi settings manually, because it shuts off and "fail to save" the settings.
IS anyone else having issues with WiFI on the AT&T stock Gingerbread kernel? (No, I don't feel the need to upgrade, since I just want to be able to use TiBU)
hurricanedad said:
The other day, I got a text from AT&T indicating that an official 2.3.5 kernel was available for my Captivate. Great, so I fire up Kies mini and install it over my rooted stock 2.2.
Update goes well, I have Gingerbread. All of my apps remain in place. Re-root (SuperOneClick) and my Titanium Backup works like a charm.
However, I can't get my WiFI to connect to save my life. IT scans for about 15 seconds then shuts back off. I can't even enter WiFi settings manually, because it shuts off and "fail to save" the settings.
IS anyone else having issues with WiFI on the AT&T stock Gingerbread kernel? (No, I don't feel the need to upgrade, since I just want to be able to use TiBU)
Click to expand...
Click to collapse
I just updated to stock GB and have no issues with Wifi, although I am not rooted. I thought that rooting with SuperOneClick didn't work with this 2.3 stock.
Hogan773 said:
I just updated to stock GB and have no issues with Wifi, although I am not rooted. I thought that rooting with SuperOneClick didn't work with this 2.3 stock.
Click to expand...
Click to collapse
I'll have to check that when I get off of work. That's what I used to root the unit when on 2.2. I wonder if the root just carried through the upgrade?
Anyway, I am probably going to flash back to froyo and update GB again, sans root to see if that helps.
For the life of me I couldn't get Superoneclick to work on 2.3.5, or 2.3.3. I flashed the rooted kernel with Odin.
No questions in General, post them in Q&A.
OK
I was having trouble with ICS ROMs and decided to go back to GB.
I chose Silver's GB rom and was mostly happy with it but could not get LTE even in places I know have plenty of signal so I decided to go "bone stock Rogers"
So I Odined back to "stock" using I727RUXKJ7_I727RRWCKJ7_RWC from SamFirmware, and even reset the flash counter.
Mostly looks OK but I still don't seem to get into LTE mode even when I'm in the city (it used to just switch up as I progressed down the highway, then drop back as I left the city (Ottawa))
I tried reflashing just the Rogers modem Radio_RIL_I727RUXKJ7.zip, but no difference...
Today I thought I would see if Kies recognized my phone as being "stock", so I let it do it's upgrade and connected my phone... it saw the phone but reports it as "Your device does not support software upgrading via Kies."
The firmware it sees says "Current firmware version: PDA:KJ7 / Phone:KJ7 / CSC:KJ7 (ATT)"
I suspect that the "(ATT)" is where the problem is (maybe for my LTE issue too??)
Anyone know how I get the CSC to stop reporting itself as ATT?
Thanks,
Jamie
robinsonj said:
OK
I was having trouble with ICS ROMs and decided to go back to GB.
I chose Silver's GB rom and was mostly happy with it but could not get LTE even in places I know have plenty of signal so I decided to go "bone stock Rogers"
So I Odined back to "stock" using I727RUXKJ7_I727RRWCKJ7_RWC from SamFirmware, and even reset the flash counter.
Mostly looks OK but I still don't seem to get into LTE mode even when I'm in the city (it used to just switch up as I progressed down the highway, then drop back as I left the city (Ottawa))
I tried reflashing just the Rogers modem Radio_RIL_I727RUXKJ7.zip, but no difference...
Today I thought I would see if Kies recognized my phone as being "stock", so I let it do it's upgrade and connected my phone... it saw the phone but reports it as "Your device does not support software upgrading via Kies."
The firmware it sees says "Current firmware version: PDA:KJ7 / Phone:KJ7 / CSC:KJ7 (ATT)"
I suspect that the "(ATT)" is where the problem is (maybe for my LTE issue too??)
Anyone know how I get the CSC to stop reporting itself as ATT?
Thanks,
Jamie
Click to expand...
Click to collapse
Cany ANYONE tell me where I can find the Rogers CSC? I can't seem to find a way to extract it from the md5 file. ('cause I have no idea of the file format)
Is there a way to find and edit the file right on my phone instead?
not the right file, the rogers one is "I727RUXKJ7_I727RRWCKJ7_I727RUXKJ7_HOME.tar.md5" , everything u need to know is here http://forum.xda-developers.com/showthread.php?t=1652398
Thanks again,
That worked perfectly... back to stock, re-rooted, and restored... Kies once again recognizes me, and I'll find out Friday, when I get into the city if the LTE is back to working again. (and IF Rogers ever drops ICS I'll be able to install it)
Jamie
robinsonj said:
Thanks again,
That worked perfectly... back to stock, re-rooted, and restored... Kies once again recognizes me, and I'll find out Friday, when I get into the city if the LTE is back to working again. (and IF Rogers ever drops ICS I'll be able to install it)
Jamie
Click to expand...
Click to collapse
yes
Okay so i got my phone (US Cellular Samsung Galaxy S Mesmerize SCH-I500) from ebay and it came with gb 2.3.4 originally and i updated to 2.3.5 then later on to 2.3.6. After doing some homework i want to get back to froyo 2.2.2 but i cant!! I tried to flash back to EE19 via odin and it bricked my phone. Then tried flashing back to EC10 and it worked but what happens is it has no signal whatsoever (baseband is uknown/no phone number) pretty much everything is unknown except the build number/firmware version :crying: I just don't get what i'm doing wrong here guys. Every time i try to make the *228 phone call to activate it, it says phone is in airplane mode go to settings to turn it off to enable connections but it's not in airplane mode!!! I factory reset it took out the battery but nothing works!! Although i was able to flash back to 2.3.4 via odin and root it. But still i want to go back to froyo :/ Please someone help me get back to a working froyo :crying: I would so appreciate this if anyone can look into this for me for i am fairly new to android but i'm getting the hang of it If you figure this issue out get a hold of me anyway you can thanks everyone!!!
Hello I rooted my i997r infuse rogers but the com# in oden was in the wrong box and it saied succesful /failed one but I didn't think much of it I was so exited that it worked I upgraded from 2.3.3 to 2.3.6 AT&T firmware thinking i have to in order to install ics I then installed cms 10 J.B 4.3 my phones runs great better than ever before execpt for the fact that my screen takes about one minute to turn on with lines I think its called rainbowing im not sure I think it has something to do with my original root that messed up my screen so I want to downgrade to stock using odin and reinstall and hopefully my screen won't be messed up so I used http://forum.xda-developers.com/showthread.php?t=1193927 it was successful I used the Odin_UXKG3_rooted_no_bootloaders_v2.zip then Odin_Stock_Rogers_UXKG3_Kernel.zip and my screen now has a shade of gray with this shade of blue this blue shade that covers the screen right when I turn it on it keeps getting worse it goes away after a couple minutes in recovery mode but now I just don't know what to do I can't even use my phone now help me please! How do I fix my video driver I guess this is whats going on help I can't seem to find a working link for CWM-UXKG3-rooted-de-odexed-update-v2.zip maybe if I install the cwm the light neon blue screen will go away?
crayzze said:
Hello I rooted my i997r infuse rogers but the com# in oden was in the wrong box and it saied succesful /failed one but I didn't think much of it I was so exited that it worked I upgraded from 2.3.3 to 2.3.6 AT&T firmware thinking i have to in order to install ics I then installed cms 10 J.B 4.3 my phones runs great better than ever before execpt for the fact that my screen takes about one minute to turn on with lines I think its called rainbowing im not sure I think it has something to do with my original root that messed up my screen so I want to downgrade to stock using odin and reinstall and hopefully my screen won't be messed up so I used http://forum.xda-developers.com/showthread.php?t=1193927 it was successful I used the Odin_UXKG3_rooted_no_bootloaders_v2.zip then Odin_Stock_Rogers_UXKG3_Kernel.zip and my screen now has a shade of gray with this shade of blue this blue shade that covers the screen right when I turn it on it keeps getting worse it goes away after a couple minutes in recovery mode but now I just don't know what to do I can't even use my phone now help me please! How do I fix my video driver I guess this is whats going on help
Click to expand...
Click to collapse
Read this:
http://forum.xda-developers.com/showthread.php?t=1613523
Thanks I read the part about the bootloaders I flashed to gb 2.3.6 and then flashed the bootloaders hoping it would fix the blue screen i always get and have to wait 5 minutes to go away every time turn m screen on it just isin't when I power my phone on its whenever I turn my screen on I can't see anything when someone calls me I have to wait, im on a rogers infuse and I hope this isn't a permanent bug. I went back to 2.3.3 gb stock I don't have a rogers boot logo anymore but it runs fine execpt for this light neon blue that covers the screen does anyone else ever have this problem please help.
crayzze said:
Thanks I read the part about the bootloaders I flashed to gb 2.3.6 and then flashed the bootloaders hoping it would fix the blue screen i always get and have to wait 5 minutes to go away every time turn m screen on it just isin't when I power my phone on its whenever I turn my screen on I can't see anything when someone calls me I have to wait, im on a rogers infuse and I hope this isn't a permanent bug. I went back to 2.3.3 gb stock I don't have a rogers boot logo anymore but it runs fine execpt for this light neon blue that covers the screen does anyone else ever have this problem please help.
Click to expand...
Click to collapse
rainbow screen on recovery = no gb bootloaders
blue screen on phone ...maybe bad cable connection or corrosion at contact
you might have to open it and check the connections
Working and tested CWM 1.2 ghz
Phase 1:
---------
To obtain CWM head over too Jscotts odin url.
1. download the file which includes root access.
"Stock UCLB3 with root
UCLB3_Unbrick_root_1.1.zip"
2. you will also need Samsung Kies, which will install the usb driver for your Samsung galaxy. The link is on the website.
3. Place your phone into Download mode
To do this, have your usb cable for your phone plugged into the computer but disconnected from your phone. shut off your phone. When the power is off press Volume up and Volume down simultaneously, after the buttons are pressed plug in the usb cable at the same time, which should be connected to the computer.
This will place the phone in Download mode.
4. open the included Odin.exe, when you see the yellow bar under ID:COM then everything is good.
Follow the rest of the instructions on jscotts website.
Finally when this procces is done, reboot into android.
Phase 2:
---------
1) Download SGS kernel flasher
2) Click on the link on jscotts website to download a stock kernel which contains CWM. use "2013.04.30-CWM-Synthesis-1.2Ghz.zip in the following link:
forum.xda-developers.com/showthread.php?p=25724638
You now have a working GB cwm and next is follow Enthropy's CM9 guide for your first ROM!
Fullmetal Jun said:
Phase 1:
---------
To obtain CWM head over too Jscotts odin url.
1. download the file which includes root access.
"Stock UCLB3 with root
UCLB3_Unbrick_root_1.1.zip"
2. you will also need Samsung Kies, which will install the usb driver for your Samsung galaxy. The link is on the website.
3. Place your phone into Download mode
To do this, have your usb cable for your phone plugged into the computer but disconnected from your phone. shut off your phone. When the power is off press Volume up and Volume down simultaneously, after the buttons are pressed plug in the usb cable at the same time, which should be connected to the computer.
This will place the phone in Download mode.
4. open the included Odin.exe, when you see the yellow bar under ID:COM then everything is good.
Follow the rest of the instructions on jscotts website.
Finally when this procces is done, reboot into android.
Phase 2:
---------
1) Download SGS kernel flasher
2) Click on the link on jscotts website to download a stock kernel which contains CWM. use "2013.04.30-CWM-Synthesis-1.2Ghz.zip in the following link:
forum.xda-developers.com/showthread.php?p=25724638
You now have a working GB cwm and next is follow Enthropy's CM9 guide for your first ROM!
Click to expand...
Click to collapse
Thank you but it's not bricked... are you suggesting this will take away the screen issue?... k so it's been a while since I used my infuse the screen was getting so annoying that I put it away for a month last night I turned it on and the screen seemed fine, I was very pleasantly surprised I re rooted it and put on the new cm10 jellybean and noticed the longer I kept using the screen the more the lines/screen problem came back I left it untouched overnight after modding it and this morning it's fine again until continued use of the screen... I have taken it apart and unplugged all the screen plugs reattached looked around everything seemed fine so I dunno... I have a really newbie question for the way I went about getting to jellybean from stock... first I rooted it with Odin_Infused_Gingerbread_Kernel_v1 and noticed that cwm was installed so is this all I need to proceed with installing ics? because I kept thinking I needed to install 2.3.6 and that is not firmware meant for my phone and thats what I think might be the cause of my screen issue sooo do I just need to root it first then go straight to ics or do I need to put 2.3.6 then ics?
I am on a rogers infuse.
crayzze said:
Thank you but it's not bricked... are you suggesting this will take away the screen issue?... k so it's been a while since I used my infuse the screen was getting so annoying that I put it away for a month last night I turned it on and the screen seemed fine, I was very pleasantly surprised I re rooted it and put on the new cm10 jellybean and noticed the longer I kept using the screen the more the lines/screen problem came back I left it untouched overnight after modding it and this morning it's fine again until continued use of the screen... I have taken it apart and unplugged all the screen plugs reattached looked around everything seemed fine so I dunno... I have a really newbie question for the way I went about getting to jellybean from stock... first I rooted it with Odin_Infused_Gingerbread_Kernel_v1 and noticed that cwm was installed so is this all I need to proceed with installing ics? because I kept thinking I needed to install 2.3.6 and that is not firmware meant for my phone and thats what I think might be the cause of my screen issue sooo do I just need to root it first then go straight to ics or do I need to put 2.3.6 then ics?
I am on a rogers infuse.
Click to expand...
Click to collapse
Re-reading your thread, I realized that you have a i997R - Roger's. These come stock GB 2.3.4 - unlike the i997-ATT that started with 2.2.1
The difference is that the i997R has already built in bootloaders from the start. That means that Roger's phone do not get the distorted recovery with flashing we termed as "rainbow." The rainbow is fixed with a bootloader flash. Roger's phone do not need this step.
I think the color distortion you are seeing could be due to a heating issue, the screen or the graphics chip. More likely than not, this may be hardware related.
If you have opened and cleaned out the connections and such, and have not noted any difference, then the problem may be deeper situated. Further testing may require another Infuse and swapping out parts to see where the issue lies.
gl
Help!
qkster said:
Re-reading your thread, I realized that you have a i997R - Roger's. These come stock GB 2.3.4 - unlike the i997-ATT that started with 2.2.1
The difference is that the i997R has already built in bootloaders from the start. That means that Roger's phone do not get the distorted recovery with flashing we termed as "rainbow." The rainbow is fixed with a bootloader flash. Roger's phone do not need this step.
I think the color distortion you are seeing could be due to a heating issue, the screen or the graphics chip. More likely than not, this may be hardware related.
If you have opened and cleaned out the connections and such, and have not noted any difference, then the problem may be deeper situated. Further testing may require another Infuse and swapping out parts to see where the issue lies.
gl
Click to expand...
Click to collapse
Yes I bootloader flashed it in desperation with an at&t bootloader and now lost the rogers bootloader lol... My phone came stock 2.3.3 gb and I desperatly wanted gb 2.3.6 so I rooted it and did so, then after discovering ics and then after jb... I believe that installing 2.3.6 might have damaged the hardware being that its only ment for at&t i997's or possibly a combination of 2.3.6 and then installing ics then jb or whatever the case may be my screen needs 1 to 5 minutes to fully appear... my question is if I ever happen to root another rogers i997 do I need to upgrade to 2.3.6 before installing ics or can I install right after root? Because I also might re root the phone back to stock and root it then install the newer version of ics then jb cm 10.2... I am currently running on jb cm 10.2 do you think it would make a difference if I rerooted to stock then install newer ics then jb with upgrading to 2.3.6 for at&t phones??? Thank you.
crayzze said:
Yes I bootloader flashed it in desperation with an at&t bootloader and now lost the rogers bootloader lol...
Click to expand...
Click to collapse
no big deal..same phone..same hardware..different version of firmware..it's the APN for providers that makes the difference
crayzze said:
My phone came stock 2.3.3 gb and I desperatly wanted gb 2.3.6 so I rooted it and did so, then after discovering ics and then after jb... I believe that installing 2.3.6 might have damaged the hardware being that its only ment for at&t i997's or possibly a combination of 2.3.6 and then installing ics then jb or whatever the case may be my screen needs 1 to 5 minutes to fully appear.
Click to expand...
Click to collapse
yes..you are right. Rogers came with 2.3.3 not 2.3.4 as I previously stated.
the earlier versions of gb came with Carrier IQ that track users. It was taken out later.
I doubt Installing 2.3.6 or ICS or JB will cause any prob with the phone. I suspect your phone may have some hardware issues.
After the first flash, the os (esp ICS or JB) may need time to build cache and dalvik..sometimes it may take a few minutes. Blue or distorted screen, however, is not typical from my experience.
crayzze said:
my question is if I ever happen to root another rogers i997 do I need to upgrade to 2.3.6 before installing ics or can I install right after root? Because I also might re root the phone back to stock and root it then install the newer version of ics then jb cm 10.2... I am currently running on jb cm 10.2 do you think it would make a difference if I rerooted to stock then install newer ics then jb with upgrading to 2.3.6 for at&t phones??? Thank you.
Click to expand...
Click to collapse
IMO, it doesn't matter how you get to CM10.2. Rooting is just one method. The idea is to get insecure recovery...ie..cwm.
from stock rom, you can odin or heimdall a custom kernel without rooting. boot into recovery and flash what you want.
it doesn't matter if its rogers or att. same phone..same hardware. years ago, it only mattered when a user had to return or exchange the phone for warranty...after the warranty period ended..it's not a big deal.
flash away at any method you want. it doesn't make any difference in my mind. get some practice..the infuse has many restore methods via odin or heimdall
rooting gives one access to the root directory
insecure kernel or custom recovery allows one to flash firmware without manufacturer signature