Did you have to unlock the phone to do that?
I called AT&T and they said that they don't have the unlock code since they don't even sell the device, but that it works on sims outside the US. She seemed to imply that it won't work on tmobile but that if I go outside the US, and just put a sim in, it will work without me having to unlock the phone in anyway.
Can anyone verify this?
Thanks
dannypp said:
Did you have to unlock the phone to do that?
I called AT&T and they said that they don't have the unlock code since they don't even sell the device, but that it works on sims outside the US. She seemed to imply that it won't work on tmobile but that if I go outside the US, and just put a sim in, it will work without me having to unlock the phone in anyway.
Can anyone verify this?
Thanks
Click to expand...
Click to collapse
Most customer service representatives are pure idiots .... Nexus S is a Google phone , so it's factory unlocked to any SIM card you use with it(you may or may not get 3G on other networks depending on the other network 3G frequencies , and if the forgein network has 3G on 900/1900MHz it will have 3G on this Nexus S)..
Hope this helps..
Well I went to tmobile and the guy put in a sim into the phone and the phone got no reception nor did it seem to recognize the sim at all.
So it seems that it isn't unlocked.
I tried putting in this code: *#7465625#
Its supposed to tell you if the phone is unlocked or not, but nothing happens, it just says: Connection problem or invalid MMI code.
I don't need it to work on tmobile, but I do need it to work on foreign simcards. And I saw on other forums that for some people it worked on tmobile and others it didn't so there doesn't seem to be any clear answers.
dannypp said:
Well I went to tmobile and the guy put in a sim into the phone and the phone got no reception nor did it seem to recognize the sim at all.
So it seems that it isn't unlocked.
I tried putting in this code: *#7465625#
Its supposed to tell you if the phone is unlocked or not, but nothing happens, it just says: Connection problem or invalid MMI code.
I don't need it to work on tmobile, but I do need it to work on foreign simcards. And I saw on other forums that for some people it worked on tmobile and others it didn't so there doesn't seem to be any clear answers.
Click to expand...
Click to collapse
you have another issue here , check your phone
Thanks for the response.
What do you mean by other issue and how should I be checking my phone?
In any case, I put in a simcard that my brother gave me which I believe is from Mozambique on a carrier Vodacom. It asked for the code of the sim when I put the phone is as always, and so I got in putting in 0000.
It then showed no connection to anything whatsoever, also as always.
Keep in mind I did have wifi on.
Then all of a sudden it asked me to update my phone and install something. So I just said yes and it updated and rebooted.
All of a sudden I have bars here and there and it recognizes that tmobile and AT&T are in the area. I also saw I think at the top of the notification bar when I pull down the notifications tab, it said Vodacom. Of course I get no reception whatsoever but that is expected, this sim was a gophone sim in Mozambique.
Does this mean that its unlocked if it is recognizing another sim, even though no confirmation of reception? I plan to try again with tmobile now and perhaps make sure I have wifi connection while doing so and leave it in for longer.
Thanks and please let me know if you have any thoughts.
what ROM you're on now?stock or costum one ? you also might consider a FULL phone wipe.because this might be caused by a difference between at&t apn or other Sim data and the other .check for that
I'm on stock 2.3 that the phone came with. Haven't messed with it at all.
So I assume you saying that if I want to switch to another sim, I should do full phone wipe then? so that the at&t apn doesn't confuse it?
IF it doesn't work with tmobile again, I will try taht, and I will also try to learn what an apn is.
Thanks for the help.
Might work or might not !!! backup all your data and apps first then use the shotgun method lol
But what I am sure of is that Nexus S phones are always unlocked and SIM free..
Related
Ok - tearing my hair out here...
I have an AT&T Fuze I was given and am trying to get it going on Telstra NextG here in Australia.
I was fully expecting the device to be SIM locked, and am ok paying to get an unlock code, however I'm not sure exactly how to tell. When I boot the device up, it gives a missing SIM card message:
The SIM card is missing.
You can still make emergency calls if your service provider supports it.
Click to expand...
Click to collapse
...not a "Your device is locked" message. Can someone tell me what the device should look like? I'm assuming that I should get something other than a missing SIM message?
I'm starting to think that there is a physical problem with the device I have tried two Telstra SIMs, an old Prepaid Vodafone, and four Optus ones...just for good measure. (Except for the Telstra ones they aren't in service, but I assume they should still be recognise)
I've also put HardSPL and TAELROM v4.23544, and the device functions beautifully, except for no network access :-/
I've also tried putting some sticky tape on the top of one of the SIMs to try and give it a better contact, as mentioned in one of the other threads.
Yes, I'm sure I'm putting it in the right way up (SIM works fine in my Touch Pro), and all the contacts appear clean etc.
If someone else has had such an error repaired, can they tell me if it's a major task? Or fairly cheap?
Weird and the previous owner took the AT&T SIM out in front of me, and apparently it has never given any issues before.
Looks like it is sim locked to me.
at&t have an unlock.exe included in their ROM which is used for unlocking via code, you could see if your friend can get unlock code from at&t (can get free code in most circumstances! ) If he can you could flash back to a at&t ROM & unlock.
Other option would be using IMEI unlock service or olipro unlock service.
Thanks for the reply!
Ok, so this is normal? The unlock.exe doesn't fire automatically and you get a SIM missing message until you run it manually? That would be awesome if it is the case.
I could probably get a free unlock, but for the effort of calling the US I'm happy to make a donation to Olipro if that's likely to work. (And he can fix his website - opened a ticket for that)
I'm assuming the IMEI unlock service option wouldn't work unless I flash back to an AT&T ROM to get unlock.exe back, as that will just give me an unlock code which I will have nowhere to type, yeah?
Thanks again.
So, you got an AT&T Fuze (US) and you're trying to get it working on your network Telstra? Now your SIM Card, its not working on the Fuze, but it does work on your old phone? Or on any phones on your network? Any of your family/buddies SIM card work on the Fuze? Im just trying to figure out if its the SIM card or the Card reader on the device that's not working. As far as why you are getting the "SIM card missing screen" I'm not too sure about. I've searched all over the net trying to find out what kind of screen is displayed when the phone is SIM Locked, but no luck!!! Anyhow, many times these devices are locked to their specific carriers for security purposes. I did come across a few threads where people from foreign countries that bought (US) spec phones needed to SIM unlock. So i would say if money is not an issue, try SIM unlocking for a fee. Narrow down the problem. You can try this link http://forum.xda-developers.com/showthread.php?t=556059&highlight=SIM or http://raphael.sim-unlocker.com/
Two other notes:
I have an AT&T Fuze and in the (US) we have 3g networks. Before I upgraded to the Fuze my old SIM Card was not 3g compatible. It was a 2g SIM, therefore it did not work on the Fuze. (this may not be applicable to you) But note your SIM might not be 3g or the device needs to be unlocked for access to other GSM networks.
Last, my girlfriend is from Hungary and she brought a GSM cell phone, i think it was Tmobile. Anyhow I tried my AT&T Sim Card on it and the phone did recognize it...hahaha I just concluded...If the SIM Card is not recognized, then it must be missing....wow!!!
SIM Unlock, give it a shot....
Yep - AT&T (US) on Telstra (Australia).
Mister B above has given me some hope that the HW is ok, and I just need to get it unlocked... but I was hoping someone could confirm that this is normal before I spend AU$25.
All the threads I read seemed to imply that it would just pop up and ask you for a code when it detects a SIM card from a different network, but that didn't happen to me.
Also, I think I have to wait for Olipro's site to come back on the air (http://raphael.htc-unlocks.com is down for me at the moment). I'm hoping his SW doesn't required me to type an unlock code on the device itself.
Otherwise I will need to reflash the AT&T ROM back to get the unlocker.exe app (unless someone can send it to me? Not even sure where that is stored on the standard ROM to be honest.
Yeah - been through the whole 2G vs 3G SIM card before. Pretty sure my current one is good, as it's not that old and I get 3G on my Touch Pro with it.
As far as i'm aware the at&t devices do not show the unlock code window, you have to run the unlock.exe.
If you are sure the device & your network have compatable radio bands I would put it down to sim lock.
As far as i'm aware IMEI check doesn't need code input, they have support line & when I used them they were cheaper than Olipro.
http://www.imei-check.co.uk/raphael_unlock.php
Thanks (didn't realise IMEI Check was a website!)
Umm...back to nasty AT&T ROM now. Any hints where I might find unlock.exe (or a shortcut to it?)
Meh - IMEI Check website might be cheap, but they tell you AFTER you have generated the source file etc, that all first time users must validate their PayPal sale by...get this...taking photo with their camera phone of some documentation proving their identity, and email it to them...which they will process in 8 hours or so. No thanks...
Hmmm... http://www.unlocking.com/HTC-Fuze-Unlocking.html says:
"How To Enter Your HTC Fuze Unlock Code
Once you have received your HTC Fuze unlocking code, it is very simple to enter it:
- Insert any Sim card into the handset
- Turn the phone on
- You will be prompted to enter and Unlock Code
- Enter the code we provided
- Your phone is unlocked"
Double Meh. That's the bit I'm having issues with...
Ok. Used sim-unlocker.com, and once the software had finished doing it's thing, it popped up a box on the phone asking me to input the code.
Trouble is, SIM still not recognised Guess I'm looking at a fraked phone... (What a waste of time and money that was)
That is a bummer, you saw it working with the at&t sim, yes !
The fuze supports the 850MHz UTMS band so it should work fine on next G.
You could try flashing a generic HTC ROM complete with radio & seeing if you get any luck with that.
Also try some more packing on the sim card just in case it is simply a contact issue.
Total bummer if the fuze has developed a fault.
Thanks for everyone's help. It's in getting a quote for repair. Looks like I stuffed one of the pins when I put the SIM card in for the very first time :/
you gotta go to comm manager and start gsm or phone service then it'll say your phone is locked and ask for an code
Zilch said:
Thanks for everyone's help. It's in getting a quote for repair. Looks like I stuffed one of the pins when I put the SIM card in for the very first time :/
Click to expand...
Click to collapse
What are the odds on doing that, total bad luck.
HTC Fuze is lock to AT&T
djteotancolis said:
you gotta go to comm manager and start gsm or phone service then it'll say your phone is locked and ask for an code
Click to expand...
Click to collapse
The only way is use the simunlocker software ore buy it for $2.70 US dollar on ebay to get the unlock code from the guy name blowfish06 or get the code from AT&T. I unlock over some of them. It will automatic trigger the promt for unlock code if you put any sim that is not from AT&T in the phone.
Just as an update...
SIM slot contacts were stuffed. $150 to fix at the local repair shop in the mall. All working and unlocked now.
A SIM from a different network should pop up a message, but wasn't due to the HW fault. The unlocker software popped up this message when it was run however, so I was able to unlock it while the SIM slot was stuffed.
Thanks for everyones help.
Zilch said:
Just as an update...
SIM slot contacts were stuffed. $150 to fix at the local repair shop in the mall. All working and unlocked now.
A SIM from a different network should pop up a message, but wasn't due to the HW fault. The unlocker software popped up this message when it was run however, so I was able to unlock it while the SIM slot was stuffed.
Thanks for everyones help.
Click to expand...
Click to collapse
You could have just replace the hold sim stray just for $17 on ebay.
Yeah most likely. But I was a) lazy, b) in a hurry and c) it was a work phone so I claimed it
I confirm that i have unlocked Droid 2 Global without Verizon activation and unlock code . Now I'm testting with all my country carrier , will post result soon .
Now , please do not update your firmware !
great work! but how did u manage to do this?
Any news? Could you please provide me the instructions how you get it activated and unlocked without Verizon code? I'd be glad if I could help you by testing it on my Droid2 Global. Thanks in advance.
There is a guy can do this in China already, for a while. However he wouldn't reveal the secret. Not by TurboSim, not by hardware fix, etc. The phones need to be sent to him so he can do the "software refresh".
namsss said:
I confirm that i have unlocked Droid 2 Global without Verizon activation and unlock code . Now I'm testting with all my country carrier , will post result soon .
Now , please do not update your firmware !
Click to expand...
Click to collapse
did not work for me, I downgrade to 2.4.330 to 2.4.29 and did a factory / reset to ask me to activate again, but nothing happened, did not work the code simunlock
=(
TurboSIM works fine without Verizon activation and unlock code. Checked. Bought at Ebay, just input 200539432676 in Search string on Ebay.
namsss and Skinny1979
Are we talking about a droid 2 global that could not be unlocked by code previously?
Yes, I have droid 2 global in Ukraine, and with Turbosim its works fine. I bought the code twice in the Ebay auction and it did not fit.
Skinny1979 said:
Yes, I have droid 2 global in Ukraine, and with Turbosim its works fine. I bought the code twice in the Ebay auction and it did not fit.
Click to expand...
Click to collapse
but your droid 2 was activated?
I think that should work with non activated phone verizon
My D2G wasn`t activated. I bypass activation screen
droidforums.net/img/droid-x-bypass.png
and insert turbosim
But there is little problem - you can only make and receive calls, no internet
Skinny1979 said:
Yes, I have droid 2 global in Ukraine, and with Turbosim its works fine. I bought the code twice in the Ebay auction and it did not fit.
Click to expand...
Click to collapse
Thanks for the info. Does everything on the phone works ok just as if it had been unlocked by code? (including data/internet)
data/internet - not working (
only calls
damn, that's not ideal but i guess it's something.
What about the OP's namsss solution?
Skinny1979 said:
data/internet - not working (
only calls
Click to expand...
Click to collapse
Have you set proper APN for data connectivity? By default D2G has very limited list of preconfigured settings and certainly it has no settings for Ukraine. Are you able to create Access Points in settings/wireless/mobile networks/access point names?
I able to create Access Points in settings/wireless/mobile networks/access point names, and I set proper APN. But nothing
I flash CDMA part of D2G from Verizon to Intertelecom (ukrainian CDMA carrier), its easy, and now I have EVDO internet. But GSM - only calls.
I don't know if this is just an isolated case but I would like to share with all D2G owners. I just got 2 D2G from eBay and they arrived this morning. I have done some research about this phone before about its usability after having to purchase unlock codes or what not to have it working.
However, upon inserting my simcard to the phone, it asked me to touch the Android icon and then it reads "A special call needs to be made to activate your phone service." ... I bypassed it by pressing "menu" and selected the network mode to be GSM only and it detected my Rogers sim card already with full signal. After that, I set up the wifi and it let me to pass through everything, all the way to the Android homescreen.
Now I have two fully functioning D2G... It just makes me wonder about what is going on with the difficulty to unlock the phone... it was as easy as a plug-and-play for me.
One important thing is, however, I am using a microsim, would that be the key to unlock the phone? lol i know this sounds dumb but I really didn't run into any problem using this phone, fresh from eBay brand new non-activated and locked to VZW.
matthewngsm said:
I don't know if this is just an isolated case but I would like to share with all D2G owners. I just got 2 D2G from eBay and they arrived this morning. I have done some research about this phone before about its usability after having to purchase unlock codes or what not to have it working.
However, upon inserting my simcard to the phone, it asked me to touch the Android icon and then it reads "A special call needs to be made to activate your phone service." ... I bypassed it by pressing "menu" and selected the network mode to be GSM only and it detected my Rogers sim card already with full signal. After that, I set up the wifi and it let me to pass through everything, all the way to the Android homescreen.
Now I have two fully functioning D2G... It just makes me wonder about what is going on with the difficulty to unlock the phone... it was as easy as a plug-and-play for me.
One important thing is, however, I am using a microsim, would that be the key to unlock the phone? lol i know this sounds dumb but I really didn't run into any problem using this phone, fresh from eBay brand new non-activated and locked to VZW.
Click to expand...
Click to collapse
you are not using GSM? GSM unlocked to use and not unlock the screen: D
@Namsss: You are "Chém gió" for me? You have to do, why not post them?
matthewngsm said:
I don't know if this is just an isolated case but I would like to share with all D2G owners. I just got 2 D2G from eBay and they arrived this morning. I have done some research about this phone before about its usability after having to purchase unlock codes or what not to have it working.
However, upon inserting my simcard to the phone, it asked me to touch the Android icon and then it reads "A special call needs to be made to activate your phone service." ... I bypassed it by pressing "menu" and selected the network mode to be GSM only and it detected my Rogers sim card already with full signal. After that, I set up the wifi and it let me to pass through everything, all the way to the Android homescreen.
Now I have two fully functioning D2G... It just makes me wonder about what is going on with the difficulty to unlock the phone... it was as easy as a plug-and-play for me.
One important thing is, however, I am using a microsim, would that be the key to unlock the phone? lol i know this sounds dumb but I really didn't run into any problem using this phone, fresh from eBay brand new non-activated and locked to VZW.
Click to expand...
Click to collapse
Huh! Looks like this phone was already unlocked. My phone definitely asked me for subsidy unlock code when I inserted my Rogers SIM. Mine unlocked with a code I purchased off Internet. So you can call/use data services with Rogers and you've been never asked for unlock code?!
matthewngsm said:
upon inserting my simcard to the phone, it asked me to touch the Android icon and then it reads "A special call needs to be made to activate your phone service." ... I bypassed it by pressing "menu" and selected the network mode to be GSM only and it detected my Rogers sim card already with full signal. After that, I set up the wifi and it let me to pass through everything, all the way to the Android homescreen.
Click to expand...
Click to collapse
Seems like the two units you bought came already unlocked?
BTW how much did you get them for? if you dont mind telling us
leobg said:
Huh! Looks like this phone was already unlocked. My phone definitely asked me for subsidy unlock code when I inserted my Rogers SIM. Mine unlocked with a code I purchased off Internet. So you can call/use data services with Rogers and you've been never asked for unlock code?!
Click to expand...
Click to collapse
Exactly... I am able to use data as I see the 3G icon on the status bar, as well as being able to use the My Rogers Account app, which would allow you to retrieve the info. only if you are on Rogers 3G network. But then the thing is when I first turned on the phone, it asked me for activation. I clicked "activate" but it said I failed and had to call VZW hotline. At that point I switched the network mode to GSM/UMTS only and that activation screen never showed up again.
Hello, I bought a SIM card from straight talk hoping to use it on my merge because I have seen people online that says I can do that as long as i have my SIM card unlocked. But after I got the card activated and put it in my phone it don't work. I try changing to GSM and using their APN but I have no signal, the mobile network just stays unchecked and I cannot check it. After a few minutes my phone suggests switching over to global mode and i do have mobile signal then but still no connection with anything. I called the straight talk woman and she told me it only works with AT&T or T-Mobile phones but it just don't make any sense to me that you have to have one of those previous carious just to get them as a new carrier? Am I missing something here?
Fixed
deathknight842 said:
Hello, I bought a SIM card from straight talk hoping to use it on my merge because I have seen people online that says I can do that as long as i have my SIM card unlocked. But after I got the card activated and put it in my phone it don't work. I try changing to GSM and using their APN but I have no signal, the mobile network just stays unchecked and I cannot check it. After a few minutes my phone suggests switching over to global mode and i do have mobile signal then but still no connection with anything. I called the straight talk woman and she told me it only works with AT&T or T-Mobile phones but it just don't make any sense to me that you have to have one of those previous carious just to get them as a new carrier? Am I missing something here?
Click to expand...
Click to collapse
Thanks to the helpful people over at 2fastroms and their quick response I found out that you have to have the 1.06.00.0910 verizon radio flashed to your system. You have to install the radio in the boot-loader and not the recovery menu, it took me a minute to figure that one out. Just informing anyone that has the same problem as me because I could not find it anywhere else on the web. Anyway credit to jianC for the help.
I am by far no where near the caliber of technology that lie within this web site, however, I am simply trying to get some direction regarding my S3.
I purchased it from Verizon-2 yrs ago, contract expired 7/8/13; did not renew. I went with Consumer Cellular (more fitting for the older generation) but my S3 WON'T WORK ON THEIR NETWORK!
I have spent the last 3 weeks doing research on this phone to see if it can be 'unlocked' to work with a another carrier. The phone is like brand new and I don't want to get rid of it, I'd prefer to use it with the new carrier.
Is there anyone who can give me some direction to this issue? Can the phone infact be "unlocked' to work with Consumer, it has the Verizon SIM card in it, I was able to root it, successfully, now if I can just get it unlocked. Had to purchase another phone so that I would not be without phone service while I work on trying to get this one unlocked.
I've been told it can't because Verizon is a CDMA carrier and Consumer is a GSM..if this in fact true than I've no options but to sell the phone.
I do have "Preferred Network Mode' and it gives me the following options, Global, LTE/CDMA & GSM/UMTS.
Any help, directions or information would be greatly appreciated. With my thanks to all those who have taken the time to read this post.
Southern66 said:
I am by far no where near the caliber of technology that lie within this web site, however, I am simply trying to get some direction regarding my S3.
I purchased it from Verizon-2 yrs ago, contract expired 7/8/13; did not renew. I went with Consumer Cellular (more fitting for the older generation) but my S3 WON'T WORK ON THEIR NETWORK!
I have spent the last 3 weeks doing research on this phone to see if it can be 'unlocked' to work with a another carrier. The phone is like brand new and I don't want to get rid of it, I'd prefer to use it with the new carrier.
Is there anyone who can give me some direction to this issue? Can the phone infact be "unlocked' to work with Consumer, it has the Verizon SIM card in it, I was able to root it, successfully, now if I can just get it unlocked. Had to purchase another phone so that I would not be without phone service while I work on trying to get this one unlocked.
I've been told it can't because Verizon is a CDMA carrier and Consumer is a GSM..if this in fact true than I've no options but to sell the phone.
I do have "Preferred Network Mode' and it gives me the following options, Global, LTE/CDMA & GSM/UMTS.
Any help, directions or information would be greatly appreciated. With my thanks to all those who have taken the time to read this post.
Click to expand...
Click to collapse
How did you get this phone 2 years ago? It barely came out a little more than a year ago.
Next, you can unlock it, but only if you pay for the full retail for the phone and then contact Verizon about what you want to do and then get an unlock code. After that, you're going to need a SIM card from Consumer Cellular.
There shouldn't be a problem with radio frequencies since the Verizon GS3 is a global phone. So the SIM card should work after you get it set up.
If I'm wrong in some aspect, someone feel free to correct me.
sent from my Infected Bonestock GS3
david_hume said:
How did you get this phone 2 years ago? It barely came out a little more than a year ago.
Next, you can unlock it, but only if you pay for the full retail for the phone and then contact Verizon about what you want to do and then get an unlock code. After that, you're going to need a SIM card from Consumer Cellular.
There shouldn't be a problem with radio frequencies since the Verizon GS3 is a global phone. So the SIM card should work after you get it set up.
If I'm wrong in some aspect, someone feel free to correct me.
sent from my Infected Bonestock GS3
Click to expand...
Click to collapse
In regards to Unlocking the phone, the phone is unlocked out of the box, you just pop in your sim and select GSM mode! you have to set the APN for DATA yourself tho!
Galaxy s3 sCH-I535
david_hume said:
How did you get this phone 2 years ago? It barely came out a little more than a year ago.
Next, you can unlock it, but only if you pay for the full retail for the phone and then contact Verizon about what you want to do and then get an unlock code. After that, you're going to need a SIM card from Consumer Cellular.
There shouldn't be a problem with radio frequencies since the Verizon GS3 is a global phone. So the SIM card should work after you get it set up.
If I'm wrong in some aspect, someone feel free to correct me.
sent from my Infected Bonestock GS3
Click to expand...
Click to collapse
Hi:
I do not recall the date of purchase but know that when I purchased it I had to sign for a 2 yr contract with Verizon..that contract was up July 8,2013.
That is not important, what is important is to find out if in fact the phone can be unlocked, VERIZON swears it is unlocked so they are not going to be of any use to me to get their help. It is up to me to find someone who can unlock this phone via a cable. The code places I have contacted can't come up with a code, they have instructed me that it needs to be done with a cable.
As I stated, I am simply trying to get the phone unlocked to use on Consumer Celluar, of which I am already a memeber and have the SIM card activated on another SAMSUNG phone of which I had to buy.
I do not have to buy the phone outright, as the phone is paid for, thus the 2 yr contract. the phone is mine, but as long as it is in the state it is now, I can only use it on VERIZON.
The I535 has a sim card in it from Verizon, when I take out the Verizon SIM card and put in the Consumer SIM card I get the message, "this is a non verizon SIM card.
I am researching this everyday to find out if IT CAN BE UNLOCKED, AND #2 WHO CAN I GET TO UNLOCK IT? Verizon went so far as to tell me that all the person needs is a USB cable and PC...how true this is, I don't know.
Thank You
Southern66 said:
Hi:
I do not recall the date of purchase but know that when I purchased it I had to sign for a 2 yr contract with Verizon..that contract was up July 8,2013.
That is not important, what is important is to find out if in fact the phone can be unlocked, VERIZON swears it is unlocked so they are not going to be of any use to me to get their help. It is up to me to find someone who can unlock this phone via a cable. The code places I have contacted can't come up with a code, they have instructed me that it needs to be done with a cable.
As I stated, I am simply trying to get the phone unlocked to use on Consumer Celluar, of which I am already a memeber and have the SIM card activated on another SAMSUNG phone of which I had to buy.
I do not have to buy the phone outright, as the phone is paid for, thus the 2 yr contract. the phone is mine, but as long as it is in the state it is now, I can only use it on VERIZON.
The I535 has a sim card in it from Verizon, when I take out the Verizon SIM card and put in the Consumer SIM card I get the message, "this is a non verizon SIM card.
I am researching this everyday to find out if IT CAN BE UNLOCKED, AND #2 WHO CAN I GET TO UNLOCK IT? Verizon went so far as to tell me that all the person needs is a USB cable and PC...how true this is, I don't know.
Thank You
Click to expand...
Click to collapse
Verizon is right by saying its unlocked, and thats the most anyone can help you, if you are going to try unlocking the phone by cable, you might as well throw money down the drain! and 2 you need to update to the MF1 software! as MB1 and MD3 would tell you its non verizon sim card, but even on that update if you put the phone in GSM mode in Network settings the phone should work fine for calling and texting!
having the same issue, if you find out anything will you please let me know how to do this too. i would greatly appriciate it
SIM
Did you get the free Consumer Cellular SIM yet? Your post said you have rooted and have the Verizon SIM, and you can't get on CC network without their SIM card.
The phone is already "unlocked" for global/GSM use with the JB update, so you should be able to just pop in a SIM card from CC and change settings (they should provide you with this info).
A lot of ppl are saying the Verizon GS3 is already unlocked, but when i pop in my metro pcs sim card and switch network to cdma, nothing happens. What would I have to do to make it work with this metro carrier?
No Data, No Voice, No SMS
Hi. Im also having the same issue. I have a Verizon GS3 that was originally running 4.0.4, VRALHE. I rooted, updated the baseband to MF1, and installed RLS16 of Hyperdrive, so I now am on 4.1.2. I have the option to go GSM or Global, but when I put in my MetroPCS sim, I get nothing. It prompts me for Global, but I cant make calls or send sms. I also put in the APN and no data as well. Anyone know whatbI should do next? I have an IMEI, it doesnt appear to be lost, and I have tried the phone info app, as well as trying to go through the secret menu, the network lock menu is blank.
Hey, I got the same problem, and considering how it's been a while since the last post I wonder if there is any new news on this front. Thanx!
P.s: It came preinstalled with 4.3 stock, not rooted yet. I have the option to instal 4.4.2 via Kies {PDA:NE1 / PHONE:NE1 / CSC:NE1 (VZW)}.
Update here:
I digged into some settings and found that switching it into either Global or GSM seems to make the phone capable of voice calls.
Idk about 3G, I did manually type in the APN settings, but I never use anything other than wifi because internet here is expensive unless you go with one of their plans.
So if you haven't tried it, on 4.3 go to settings, under wireless and networks select 'More Settings', Mobile Networks, Network Mode.
Worked for me, although I still get "Non-Verizon SIM" in the notifications bar and it looks like my signal is a bit weaker than before. But still works.
guys you are wrong
guys there is no way metropcs, Boost mobile or sprint networks Work cause these are CDMA carriers and verizon and the other CDMA Carriers has a different activation way on Verizon smartphones the GSM module(gsm networks as well) come unlocked for foreigner carriers even the GSM US carriers(AT&T or TMOBILE) sometimes doesnt work hope that info help
Hello, I just bought a verizon Samsung Galaxy s7. I am a net10 customer, so to use the phone i purchased the byop kit and inserted the verizon compatible chip and then i go to register the phone with net10, and it says it cant do it, to contact customer service. So I called them and they said that for some reason the imei wont register manually, and that i have to call verizon and see if it was locked. So i called verizon and they said according to the imei i gave them it isnt locked, and that verizon doesnt even lock 4g lte devices. but no matter what i do i cannot get the phone to register with imei. I have even tried strait talk. Another thing to note is that on the verizon website, the s7 isnt listed as compatible device for a byop plan.
So theres no one i can call to have anything unlocked, i cant get my money back from net10, after i called net10 customer service back and told them that verizon said it wasnt locked, net10 CS then stated that the phone wasnt compatible on their network.
A verizon tech said he sometimes has problems registering phone imei's. He said sometimes it goes through, and sometimes you have to keep trying. I really have no clue of what type of process is happening here...
So, i took out the verizon compatible sim, and put in the att/unlocked gsm device sim and then registered that through net10. it actually went through, I now have a phone number and i have basic data, but i cannot send or receive mms. I used the APN settings i found somewhere on the internet for ATT network as they are the only ones that work so far..
The other problem i have is that my phone says the sim isnt from verizon, which im assuming i can just flash the "u" version of the rom to take care of? But am i hoping there is a way to make my phone work in their network so that i can use the intended sim card.
So with all that said I have a couple questions.
1. Why wont my phones imei register on the carrier networks?
2. If i cant get it to register on their networks, is there any way to at least get my mms working?
I find it very strange that no one else has had this problem. I cant find any information as to why the s7's arent part of the byop yet.
Thanks in Advance!