I really need help restoring my framework-res.apk? - General Questions and Answers

Hi,
In an attempt to remove the emergency dial button from the lock screen, I got into boot loop. I had edited some xml file in the framework-res.apk, put it on the phone, but then every time I booted it up, I couldn't do anything, it would reboot and reboot... I have a backup of the original framework-res.apk, so I did factory reset in recovery mode, managed to get my phone working long enough to put the original framework-res.apk in the correct folder, but as soon as I tried to set the right permissions, it rebooted and now, logically, it reboots but it doesn't even get to the PIN lock screen...
I have had this phone 3 days now and I have no money for a new one, is there any way I can restore the original file with the correct permissions without being able to boot into the phone, the only thing I have is recovery mode with the options "apply update from sdcard", "wipe data / factory reset", "wipe cache partition" and "test redbend"
Please, I am really desperate here. Searching the internet for hours for a solution, but in most cases I just lack the knowledge to do it. Also, if it's possible, I'd like to maintain my warranty.
Please help me, I'd really appreciate it!
Thanks in advance,
rob
*EDIT: I have a Samsung Galaxy Gio

RobvanBobbert said:
Hi,
In an attempt to remove the emergency dial button from the lock screen, I got into boot loop. I had edited some xml file in the framework-res.apk, put it on the phone, but then every time I booted it up, I couldn't do anything, it would reboot and reboot... I have a backup of the original framework-res.apk, so I did factory reset in recovery mode, managed to get my phone working long enough to put the original framework-res.apk in the correct folder, but as soon as I tried to set the right permissions, it rebooted and now, logically, it reboots but it doesn't even get to the PIN lock screen...
I have had this phone 3 days now and I have no money for a new one, is there any way I can restore the original file with the correct permissions without being able to boot into the phone, the only thing I have is recovery mode with the options "apply update from sdcard", "wipe data / factory reset", "wipe cache partition" and "test redbend"
Please, I am really desperate here. Searching the internet for hours for a solution, but in most cases I just lack the knowledge to do it. Also, if it's possible, I'd like to maintain my warranty.
Please help me, I'd really appreciate it!
Thanks in advance,
rob
*EDIT: I have a Samsung Galaxy Gio
Click to expand...
Click to collapse
Flash a stock rom or custom rom for your phone. ALWAYS backup before you do any Modding or flashing...hope this helps
Sent from my NookColor using xda premium

Yeah, I've done that now, but I can't find a stock rom of my region and I'm stuck with a qwerty layout, so now I think I'm going to restore a backup of my friend's phone (he has exactly the same phone). Hope I get everything back to normal then.
Greets,
Rob

RobvanBobbert said:
Yeah, I've done that now, but I can't find a stock rom of my region and I'm stuck with a qwerty layout, so now I think I'm going to restore a backup of my friend's phone (he has exactly the same phone). Hope I get everything back to normal then.
Greets,
Rob
Click to expand...
Click to collapse
Ya it should work then, or ask somebody here for a nandroid backup for your phone, good luck
Sent from my HTC Wildfire S using xda premium

Is there anything I should look out for before I restore my friend's backup to my phone? I'm kind of paranoid I'm going to screw it all up again...
Edit:
What I was planning on doing:
Root my friend's phone
Install ROM manager
Install Clockworkmod recovery
Create backup on SD card
Put SD card in my phone
Go into CWM recovery
Restore
Choose his backup
Restore
Boot up the phone, make sure everything is alright
Go into recovery mode
Factory reset / user data delete
Does this seem right or should I check some things first?
I thought I read that you have to have the same kernel version or something?
Since I'm running a stock ROM atm, I'm not sure if this is something I should be worried about.
Edit 2: I have already found out that we have different kernels, he has 2.6.35.7-perf-cl561624 and I have 2.6.35.7-perf-CL465576

ok first make a backup of your rom (i no your rom is messed up but do it anyways) flash your freinds backup, make sure you wipe data/system first. The reason I say backup yourrom first becasue you say your freind has a diffrent kernel, so if it dosent work you have a backup so you can restore where you started, understand?

Will do,
Thanks so much for taking the time to help me, I will post the results tomorrow.

ok let me how it came along

It worked
I created a backup on his phone, put the sd card in my phone, restored the backup, booted up the phone, everything worked great, rebooted in recovery mode and wiped user data en resetted factory settings, phone is up and running now with the original firmware. So glad it worked
Thanks again!

RobvanBobbert said:
It worked
I created a backup on his phone, put the sd card in my phone, restored the backup, booted up the phone, everything worked great, rebooted in recovery mode and wiped user data en resetted factory settings, phone is up and running now with the original firmware. So glad it worked
Thanks again!
Click to expand...
Click to collapse
No problem
Sent from my HTC Wildfire S using xda premium

Related

[Q] HTC Incredible White Screen from Clockworkmod Restore

First off, I did read over the other forums with a related topic to this one, and they aren't quite answering my questions, so I'm making my own post.
I'm running clockworkmod v2.5.1.2 on a rooted htc incredible. After using UnRevoked to root, I loaded up clockworkmod by holding down Vol down and power, and made a nandroid backup. All went well, and I loaded up the phone just fine.
This morning, I made a second nandroid backup, because I must have deleted something I shouldn't have with Titanium Backup when i was trying to get rid of all that verizon crapware. Just a small issue with my sms messages app. So I figured i'd do a restore.
I went into clockworkmod, and just went down to backup and restore, and selected the original nandroid backup i made. After that, HTC white screen of death.
My problem is that i hear people saying to "flash a new recovery" but I don't know how to do that. I was able to navigate to mount my sd card to my Mac, but i dont' know what to do from there.
I also hear people saying "reflash from rom manager". Well i don't have rom manager.
If anyone could help me I'd appreciate it.
I've wiped the Dalvik, the cache, and i've done factory reset. Still stuck.
Thanks for reading my post.
I'm very much a novice, but will offer what I can. Your phone is probably not bricked, it's just ailing a bit. Are you familiar with ADB Shell? There is a sticky somewhere with instructions for using it. It may be the way to fix up your phone.
Sent from my DInc via XDA App
ADB shell? Heard of it....that's about it.
I'm not familiar with the ADB shell. I was reading some more, and found that I needed FAT32 formatting for my SC card. I backed up everything from my SD card to my PC, the formatted it, and copied the PB31IMG.zip to root of SD and held Vol Down and power. It successfully updated, but now i'm still getting the white screen and when i go into recovery, i just get two white bars on the sides of the phone with a black screen. I can still boot into HBOOT.
edit: if I try to boot the phone normally, after the white screen, i get the black bars, then the phone shuts down.
I'm in the process of restoring the contents of the SD card right now, but i'm off to school until later tonight. I will check back and hopefully someone will have some info for me on what to do. I will supply any more information as well. Just ask!
Update
So I was able to get into recovery, and update to Cyanogenmod through Clockworkmod. So at least I have a working device now...but a new ROM wasn't what I was trying to accomplish in the first place. Is there any way to get my contacts and such back from my nandroid backup now? I do have 2 nandroid backups, but when I try to load them, i get the whitescreen.
Well I guess my nandroid backups are no good. If I try to restore to them, i get the white screen and I have to go back and flash a ROM to get my phone to boot. Got most of my contacts back through google's sync feature, and some of my apps and app setting from "mirror" copies of my sd card i had done in the past.

Something went wrong when flashing

So I rooted my phone a few months ago but there weren't many mods out yet, so I waited until just today. I saw this one http://forum.xda-developers.com/showthread.php?t=1157593
I followed everything until I got to the part where I had to go into recovery mode, but before I was supposed to reinstall packages to get into CWM I accidently clicked on delete all user data and delete cache date because I misunderstood. So I got into CWM after and followed it and rebooted but nothing happened and the SGS4G screen just goes on and off. I didnt know what to do so I gave this a try. http://forum.xda-developers.com/showthread.php?t=1001759
I thought it would bring my phone back to stock and rooted because I couldnt recover or restore anything. It just put me in a more confused situation. When I reboot in recovery or just turn the power button on, the SGS4G screen goes on and off still.
So all I can do is this. Go to recovery. reboot,reinstall,delete user data or cache data. It says "signature verification failed" then "installation aborted" when I reinstall packages. And like I said, when I reboot the system all it does is the SGS4G screen problem.
Is there a way to start me fresh to a stock and rooted point? I dont think I have any files or anything on my phone anymore(if that is possible). I wanted to try this over again, but correctly obviously
Thanks for any help. I really need my phone soon
Were you in download mode when you used Odin? It should have worked. Make sure that it shows a yellow symbol with the android alien holding a shovel.
Sent from my SGH-T959V using XDA App
Thanks for the reply! And yeah i was in download mode. Odin said it went through and it lead my phone into recovery phone. After that I rebooted but I'm still experiencing the SGS4G screen going on and off still. Nothing else loads.
How did you set up Odin? You got the correct file loaded into the PDA box?
Sent from my SGH-T959V using XDA App
mrchovee said:
So I rooted my phone a few months ago but there weren't many mods out yet, so I waited until just today. I saw this one http://forum.xda-developers.com/showthread.php?t=1157593
I followed everything until I got to the part where I had to go into recovery mode, but before I was supposed to reinstall packages to get into CWM I accidently clicked on delete all user data and delete cache date because I misunderstood. So I got into CWM after and followed it and rebooted but nothing happened and the SGS4G screen just goes on and off. I didnt know what to do so I gave this a try. http://forum.xda-developers.com/showthread.php?t=1001759
I thought it would bring my phone back to stock and rooted because I couldnt recover or restore anything. It just put me in a more confused situation. When I reboot in recovery or just turn the power button on, the SGS4G screen goes on and off still.
So all I can do is this. Go to recovery. reboot,reinstall,delete user data or cache data. It says "signature verification failed" then "installation aborted" when I reinstall packages. And like I said, when I reboot the system all it does is the SGS4G screen problem.
Is there a way to start me fresh to a stock and rooted point? I dont think I have any files or anything on my phone anymore(if that is possible). I wanted to try this over again, but correctly obviously
Thanks for any help. I really need my phone soon
Click to expand...
Click to collapse
signature verificaton failed means u dont have a modified recovery record
u can get that out of the cwm final thread and push it to system/bin folder overwrite the one dont replace it that will solve that issue for u
I did exactly what the thread for Odin said. I already had the 64bit drivers installed. I downloaded the link that was provided for the ROM and then Odin. The rom took a while to download but it finally did. After that I held both volume buttons and then plugged in the usb and then it went into download mode. After that I opened odin and then clicked on PDA. The only thing that I could click on was the non-extracted rom that I downloaded aforementioned above.Gave it time to download and it said successful. Then I rebooted once it sent me to recovery mode. It also states to try and do it without sim and sd card in the phone which i just tried. It went through as well, but still has the SGS4G going on and off
RaverX3X said:
signature verificaton failed means u dont have a modified recovery record
u can get that out of the cwm final thread and push it to system/bin folder overwrite the one dont replace it that will solve that issue for u
Click to expand...
Click to collapse
I would try that but idk how i would be able to push it into the system/bin folder when all my phone is letting me do is go into recovery mode
Did u flash ext4 yet?
A suggestion for you.
If you can get into Down load mode which it sounds like you can, I would use ODIN to flash KC1 with its pit, PDA, Phone and CSC files and let it fully load up. Then ODIN Whitehawk's deoxed KD1 + root and try to flash your other ROM again.
It is very hard to hard brick these phones. Always take care to make sure the mount points in recovery are set to unmount, mount, mount and finally unmount when instructed to do so.
If your getting stuck with the ext4 section which causes this boot loop alot, what I have done is to disable voodoo lagfix, reboot into the newly flashed ROM then go back into recovery and enable voodoo. Has always worked for me.
This is my first post so I apologize if I don't make any sense lol. I develop android apps for a medical software company and I'm wanting to start creating ROMs to help out this great community.
I forgot to mention: http://forum.xda-developers.com/showthread.php?t=1117554 - [REF]{BIBLE} Galaxy S 4G (7/24/11) <5:00pm cst> is your best friend
icbinb is a great rom. you will definitely have to odin, as bytesfree says. you should use kc1 by raver. after you odin kc1, boot up normally and let the rom settle in for 10 minutes. then get a root manager, such as super manager or root explorer. download the 2 files from krylons final cwm thread. move both to the proper location using the root manager. make sure the recovery file is named properly. if it has the extra .bin extension in the filename, remove it. then shut down the phone, reboot into recovery, go to reinstall packages and the orange cwm will load. once that loads up, factory reset, wipe cache, go to mounts and check the mounts (u,m,m,u), go to install from sd card, flash the ext4 converter immediately followed by icbinb. all of these zip files should be on the root of your sd. let me know how it goes.
if you get it to flash, remember to leave the phone sitting for 10-15 minutes in order for it to settle in.
also, bytefree, welcome to xda. glad to have you contributing.
As Jager said, ICBINB and others such as Black Ice are great ROMS with lots of tweaks and features. The guys that create these ROMs are awesome in their intellect and programming abilities. Mrchovee, once you get the hang of the steps required to flash a ROM it becomes second nature, just keep at it and don't let a gimped flash bring ya down man. As I said before, these little phones are hard to brick.

More B63M users here?

Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
B63M... thats my phone
Henkdrenth said:
Hi all, I just ordered a Chinese B63M phone at cect-shop.
Nice phone with great specs.
I alreadu know how to root it, but are there already custom Roms available?
Could'nt find a lot of info, just a Russion version.
Click to expand...
Click to collapse
Now that makes us 2 people who owns a B63M and got it from cect-shop.
What I find out about their phones is that it may not easily allow you to perform some insider operations, for instance, maybe its me but I could not find any custom recovery installed and this led to my first issue after I rooted, and installed the ROM manager, I saw the 'fix permission' and clicked it hoping to resolve my force close issues and it asked me to reboot after performing the process but it never got out of the boot, the loop continued, trying to boot into recovery become impossible but somehow a combination got me into a mode where I was able to clear flash and this took me back to a pre factory flash good thing I backed up titanium so I cld restore my apps and upgrade.
Right now I have tried to flash and the screen has gone blank yet the phone is responding to touch as I can hear sounds when the screen is clicked, indicating that its not bricked I just cant see anything going on (this is my current situation and seriously looking for help).
Lastly, I am trying to find out the htc equivalent to this b63m, it looks htc but I cant be sure which of the htc has been more or less cloned... this is going to help with a lot of things if known.
Cheers
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Cect is German
Henkdrenth said:
Hi there,
If you are looking for a custom recovery, try this forum, altough you have to translate it because it is in German.
Lots of people there with our phone end they know how to get a custom recovery on it.
Click to expand...
Click to collapse
Yeah thanks, I have also stumbled on the site forum before but I cld not get something out of it, maybe I have not taken time enough to search, I am back on it now and hope I get a solution to the blacked out screen problems I have after flashing.
You know cect-shop is German, they are a German company in China... I am talking to them on skype and hoping they can help me out but they seem pretty busy or cant be bothered because their response is so much delayed or even not at all.
Well technoforum has a special B63M section with all tools required.
They also have nice custom roms like a Cyanogen fork.
I also don't speak Italian, but with the help of Google translate I'm getting pretty far.
But I do let Google translate from Italian to English, that gives me the best result.
Good luck!!
Do you also get no working screen after a reboot with both volume + and power button?
That should get you to the recovery screen without any ROM drivers.
Very correct, no screen even in recovery
When I do the button combination, I believe that it may have responded to my combination for recovery mode but I just cant see anything on the screen, it just remains the same way it was... maybe it graphics issue, as in is the graphics is messed up for some reason or resolution issue, you wont see anything being displayed.
I am just guessing here but all I did was to simply flash an update.zip from sd card.
That is very strange, since flashing a rom does not affect the screen of the recovery boot.
The rom video driver gets only active during the boot process of the rom.
In the past I had some boot problems with my Wildfire start-up that I solved by removing the SIM card and SD card, removed the battery for some minutes and them booted completely resetted.
You could try that, if that does not solve the problem, the only way to wipe the phone back to factory-reset is doing it blind.
After I get my phone I could make a step-by-step guide so you could get to the reset menu...
Another possibility is to re-flash a fresh recovery img to the phone. Since I don't know what was in your update.zip, you could messed up the recovery menue, or even the bootloader.
Re-flashing those could also help and you don. t need the display from the phone, since you use the PC for that.
Here it is
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Waiting on you... I hope my blank screen gets sorted.
balamu96m said:
I too have a B63M...!!! Spice Mi-350n...........
If you need a moded recovery, i can port it for you........but you need to follow some instructions...i'll give them tomorrow!!
Click to expand...
Click to collapse
Ahh thanks man... Ii will wait to hear from you tomorrow, I aim in UK and depending on what time zones you are in but I hope to find you online to connect again.
I hope you have understood my particular issue here tho, the screen if blank even tho the fone seem to be alive and it follows the boot sequence, I can even find it using 'adb devices' command, it just the screen gone blank.
Someone suggested it may be the boot.img but I dont know about that.
Cheers
I'm from India - Local time here is GMT+5:30......!!
So, here you go !!
B63M= MTK6573 + 650mhz + Android 2.3
So, one modded recovery.img can't be used for every B63M.......this is because a different B63M phone will have a different recovery.img..........(hope u understand)
Backing up everything:
1) ROOT is necessary. It is recommended to put the phone in 'Airplane mode' so that it won't disturb the process and make sure you have ~500 mb space in SD card.
2) Download 'BackUpTools.rar' from HERE and extract it to your SD Card. You'll have 2 folders - 'gscript' and 'Install'.
3) Install 'GScriptLite.apk' from gscript folder.
3) After installation, open the 'GScriptLite' application -> Menu -> Add Script.
4) Tick 'Needs SU ?'
5) Click 'Load File' and select 'Back23.sh' and then select 'save'
6) Now Click on 'Back 23' and Super User will ask for Permission and allow it. Nothing more to touch. Wait for few minutes. After few mins, it will say 'Auto Close is Cancelled'. Now its safe to close.
7) Your Back-Up will be in 'backup_' folder located in your SD card's root.
It will have files named ' firmware.info, preloader.img, nvram.img, seccnfg.img, uboot.img, boot.img, recovery.img, secstatic. img, misc.img, logo.img, expdb.img, cache.img, system.img, data.img' in that folder. Copy it to your computer and keep it at a safe place. More Over if you are posting in the forums or sharing it online, don't include ' data.img, cache.img and nvram.img' as they contain your personal information.
Here i need two files.One is recovery.img and the other is firmware.info.
If you give both, i can port one for your phone !! Also mention your phone's model name/number because, without that it is not possible.
xdadeem said:
Here is the update.zip I flashed. http://chinamobiles.org/downloads.php?do=file&id=618&langid=4
HTML:
I am a bit surprised myself that the screen is blanked out but the phone seem to be working still.
I have removed both SIMS and SD card plus battery several times etc. nothing changed.
You said ''After I get my phone I could make a step-by-step guide so you could get to the reset menu...'', I hope you get your phone soon tho, and i can see the step-by-step guide you made.
I have actually flashed recovery into it using flash tool, ODIN dont seem to see the phone (at least the yellow box saying COm4 or 5 is not showing), I can see the phone using adb but when I say adb reboot download or recovery, something happens but I cant see what it is.
Click to expand...
Click to collapse
That was the problem, you flashed only the update, not a complete Rom.
I suggest you make a complete re-flash vorm scratch, so refash a fresh recovery.img and re-flash als a new Rom.
You can vind one at technoforum' as earlier mentioned
I thot you shd read my latest.
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Great to hear that you have visual again!
You still have root yes?
The golight rom from technoforum is a good one.
I expect mine any moment now so I can customize mine too.
Good luck!
xdadeem said:
Ok guys I appreciate this a lot.
Here at this point I think you shd hear my developments before taking any further actions or suggestions.
aha thanks, I did just that and it worked although it is still blank at the beginning of boot but later something shows up on screen and completes boots.
Remember I mentioned that someone suggested it might be a boot.img problem... well, I used flashtool to flash a boot image and I can say it worked, I now have the visuals, even tho the screen is still blank at boot start but soon after it picks up and its working, now I have the phone again.
so @balamu96m, my issue was basically the screen, without seeing anything I cannot follow the back up suggestion you gave me here, but now I can see it again.
A couple of additional issues tho...
1- I checked the kernel and it has changed from 2.3.5 into 2.3.4 and >In the current ROM flash I have lost a couple of capabilities like Flashlight, camera etc
2- I followed this link http://www.technoforum.it/forum/viewtopic.php?f=73&t=3351 to flash recovery and it says Successful with the green Circle -OK-... but I still cant get boot into recovery either when I use the keys combi or when I try to boot into recovery in mobileuncle tools, it just goes blank and stays like so until I have to remove the battery and restart boot normally.
3- From the same link above they have the Golight ROM in part 2 after recovery in part 1, I am assuming this a good ROM to flash and the things I lost will get back, but I still cant boot into recovery.
Coming back to the response from balamu96m... Should I still go ahead with what yu suggested and provide you the files details you want? both recovery.img and firmware.info... I am asking because I no longer have the original ROM that came with the phone and like I said I cant even get into Recovery after I tried flashing a new recovery.img, this one from the same link above (see the recovery.img inside the 'Recovery Moddata' file from the 'UPDATEB63MRecovery2012' download file.)
Click to expand...
Click to collapse
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
It was always so
balamu96m said:
You flashed a recovery, but that is not working ah?? Oh God!!
Why did you do that bro??
Do you have any backup of the stock one??
If you dont have, then i have 2 ideas....one idea is to flash something else such that your fone won't boot....now you can send your phone back to the manufacturer and ask them to reflash everything!!!
The other idea, i'll tell you after sometime!!
Click to expand...
Click to collapse
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
xdadeem said:
The reason i flashed recovery initially was that my phone went into a boot loop and I was unable to get into recovery, after a while somehow i figure it out and cleared flash and then restored my phone apps and co and got on fine.
But if I could not get into recovery it means that there was not stock recovery on my phone or it got missing somehow. This I have to ask Henkdrenth since he is getting the same phone from the same shop too, but there was no recovery in my B63m, I already heard there is a recovery problem with the phone anyway, and thats why I flashed recovery and it worked but then I flashed ROM and the screen went blank, which is what got me to this forum.
I did not just go and flash recovery, it because there was none on the phone in my opinion.
Click to expand...
Click to collapse
Now, is the recovery working??
Does the phone boot properly??
Wrong section. Moving to general.
YES and NO
balamu96m said:
Now, is the recovery working??
Does the phone boot properly??
Click to expand...
Click to collapse
After many troubles, I found a mod for w690 which is the build version of my phone, I could not boot to recovery so used flashtool and when I load the scatter text of the one I found, it automatically load in every item on the list including recovery and boot img , etc, so I flashed these to my phone... and for the first time I was back in how the phone came to me,
Gingerbread has now returned to 2.3.5.
One thing I have noticed is that the phone freezes on me and then reboots?
I still cannot boot into recovery, I tried this again using mobileuncle tools...
It seem that I have flashed my phone which is good, but I was unable to wipe cache because I could not boot into recovery to do this which may be the source of the current freeze and reboot.
Can I solve this using the mobileuncle or what can I do to wipe cache, if that is the problem
Well, received mine, rooted it an flashed a new recovery from technoforum using myuncletools.
All went well, so I suggest you do also a fres re-flash with a proper recovery.
Hope that should solve your problem.
Edit: moved from my tablet to my PC to look for the link of a correct recoveryfile for you.
First, load this recovery.
Unpack it and put the content to the root of your SD card.
Use myuncletools to flash this recovery.
Now you should have a usable custom recovery that allows you to factory-reset and wipe your phone
Install a fresh rom
How to? Look here

Blue screen on recovery

Whenever I try to boot into recovery (vol up and power), I get a blue screen with no text or options. It's supposed to give me an option so that I can mod my phone. I have CWM recovery, and I followed the instructions right. I'm not sure why I continue to see a screen with no options. Any help would be appreciated.
Can anyone help me with this? I know the Impulse isn't a very popular phone, but someone has to know something that relates to this (it's pretty much the same as the Ideos X5, I believe). I could really use some help.
I changed the OP to hopefully narrow the problem down for anyone reading. Maybe it'll be easier to read and help with that way.
Are you sure that you flashed the right recovery for your phone?
MissionImprobable said:
Are you sure that you flashed the right recovery for your phone?
Click to expand...
Click to collapse
Yeah, that was the problem. I was able to load the rom, which led to another problem: can't get pass the at&t screen. Doing a factory reset doesn't do anything either. I had my apps and my system data backed up on titanium, so will that help me at all to restore my phone (I can only boot recovery)? Is there anything I can do, or did I brick my phone trying to load this rom?
jlm990 said:
Yeah, that was the problem. I was able to load the rom, which led to another problem: can't get pass the at&t screen. Doing a factory reset doesn't do anything either. I had my apps and my system data backed up on titanium, so will that help me at all to restore my phone (I can only boot recovery)? Is there anything I can do, or did I brick my phone trying to load this rom?
Click to expand...
Click to collapse
In your case i would go back to stock firmware and you will be good to go
And then do it all again and maybe some went wrong during installation on your phone
Cheers

Help: Unable to hard reset my Sprint Nexus S

Hi there,
I need some help here. My wife's Sprint Nexus S is acting up - keep popping messages such as "Unfortunately XXX has stopped." So I decided to do a hard reset. I followed the instructions but weirdly the phone did not do it. It acted like doing the hard resetting but then rebooted with nothing changed. I tried both the software way - Settings, factory reset, and the hardware way - Vol up button + Power, then recovery, then Vol up + Power again at the Android with exclamation image, chose "Wipe all data and factory reset." However, the phone boots with nothing changed.
Can anyone help me with this? What else can I try?
Thanks much in advance.
<DELETED>
You could try fixing the permissions on the files through Rom Manager; it fixes a lot of Force Close generally.
kwudude said:
Have you tried installing a custom recovery and doing a hard reset through that route yet? E.G. ClockworkMod or TWRP
Click to expand...
Click to collapse
Thanks. I will give it a try. Can you point me to some instructions / files for downloading, etc.?
Cpu.gastronomy said:
You could try fixing the permissions on the files through Rom Manager; it fixes a lot of Force Close generally.
Click to expand...
Click to collapse
This one is actually the Sprint stock rom untouched. So... no Rom Manager on it. Thanks anyway. I guess a custom recovery is the only way to go now...
<DELETED>
I wouldn't install a custom recovery, and ultimately technically void your warranty, for the sole purpose of resetting it though...
Just use a one click root tool, it flashes superuser, cmw, but keeps the rest of the (stock) rom you're on!
---===:::Greetzz, jojoost:::===---
Sent from my iPad using Tapatalk HD
Thanks to you all for all the good suggestions. I have tried several things but did not succeed.
1. Flashed a clockworkmod recovery. That was successful. So I went ahead to use its factory reset function. The process completed without error but once rebooted, the phone remains the same as before.
2. Connected the phone to a PC, turned on USB storage, copied a ROM image zip file to a folder. Then tried to install it through Recovery. But the file I copied was nowhere to be found.
3. Put then phone into the bootloader mode, connected to PC, use fastboot to flash boot, system, recovery, userdata, radio image files. All went through with any issue. Rebooted, phone is the same.
In short, whatever I do, the phone remains the same. No changes can be made.
I also tried the one-click tool but could not proceed ahead. It required USB debugging turned on. I turned it on, the check mark was there, but it was really NOT turned on because on the PC, the message is that it is not on. On the phone, if I switch to a different application, or simply go back one step, and then go to developer option, the checkmark was not turned on.
It feels like the internal memory/storage becomes read-only. No changes can be made. I am not sure if the hardware is bad, or some permission issue.
Any ideas that I should try next?
From what I read and understand, I think I had a bad nand problem. Guess time to let the phone go RIP.

Categories

Resources