Star a101 help me please - Android Software/Hacking General [Developers Only]

I got a star a101 home and it does not work the power button at first I thought it might be the firmware, but I do not know what to think.
1-If I put the battery, the mobile is Turned On.
2-If I turn off the mobile With An app, and press power 5 seconds, the mobile will not start
3-I do not work to change the app Any power button for volume
4-If you enter sleep mode, and press power does not turn
5-If flashing the Original ROM, Still With the same problem
6-If I root and remapping the buttons, does not effect
ANYONE CAN HELP ME?

Related

[Q] Sleep Mode?

I've only had The Razr HD (Telstra Australia) for about 4 days. Whenever I put the phone into sleep mode I have no idea how to wake it???
I press the power button nothing happens. I hold down the Power button nothing happens. I press the power button a few times nothing happens. Wait a minute or two and press the button again still nothing. Eventually it decides to wake up when I press the button at the correct time... Though how this is determined I have no idea.
A) I'm doing it wrong?
B) I'm too Impatient (When long pressing the option says "Sleep Low power, instant on, wireless off" Am I misinterpreting the "instant on"?
C) My phone has an error somehow?
Any help would be greatly appreciated, The phone is standard don't have any apps on it that I can see that would cause a problem, have experience with a Nexus one and Galaxy S1 which were both rooted and running ICS so feel I have some idea of what is going on and this doesn't seem right?
Cheers

[Q] screen wont turn off when power button pressed

Pls help my galaxy note 8.0 GT-N5110 wont turn off when I press the power button, but it still shows the poweroff options when I hold down the power button, if it helps I installed a moddedd apk of rom toolbox pro then uninstalled it and thats when the problem started. Thx in advance:laugh:

[Completed] Problem with Power Button (S3), automatically restart is annoying, how to deactivate?

Hello there,
I have a problem with my Galaxy S3. The Power Button is damaged, and doesn't work how it should. Sometimes there is no reaction after pushing the button, or it sticks fast. And there is the Problem, when pressing the Power Button for 8 Seconds, the Phone reboots -.-
So sometimes while just using my phone it reboots itself because of the damaged power button. I found one kind of solution, with Root Explorer I changed the functions of the Keys Home Button und Power Button with the files /system/usr/keylayout/gpio-keys.kl and the other one qwerty.kl
I changed just the Names HOME and POWER, now my Power Button = Home Button, and my Home Button = Power Button.
And here is the Problem:
There is still the Function after pressing the Power Button for 8 Seconds, it reboots. How can I deactivate this Function? Where can I find it, or is there another Solution for this Problem?
I bought my Phone from a friend without a bill, and its rooted + CyanogenMod. So if someone asks... I can not let it get repaired by Samsung.
Thanks for your help and sorry for my bad english.
Hi,
Go to a service center. You need it fixed and it's not that expensive. Or find the parts and a YouTube guide and fix it yourself. Not much you can do otherwise.
Good luck!

Cannot go into safe mode please help!!

Please help me. So recently I've been having this screen overlay detected issue and I'm trying to resolve it and one of the ways I found was to go in to safe mode and disable all draw over apps. I'm ok with doing that and I know how. You hold down power button and then hold down power off on the screen. The issue is that my phone doesn't have a notification after holding power button to power off, restart and put to airplane mode it has a slide to power off a button to restart and a cancel button to cancel. So I need help to finding out how to put my phone into safe mode when everything I've seen says to hold down power off on the screen, but I don't have a hold down to power off!!!! Please help me btw my phone is called Leagoo M8 Pro.

power button doesn't work anymore

Hello,
last evening my s10e had an issue at the power button/fingerprint scanner, it doesnt work anymore! for me now it's impossible to power on the phone, i feel a classical click when i push the button, but the phone doesn't start, is there a way to power on it without this button?
i've tried to connect the phone and force the start with adb, but it remais off.
Help me please, i am in greece for holidays and i can't go in a samsung point
Are you tries restarting phone with button combo?
Using a particular combination of buttons, you can force your Galaxy S10, S10 plus, and the S10e to restart the system. Here’s how to do this.
Press and hold the Power button and the Volume Down button simultaneously until the device screen turns off.
May need to press and hold for more than 7 seconds
It will shut down and restart automatically
If the device screen stays black and you’re unable to see if it has turned off, keep holding down the Power and Volume Down buttons until you feel a vibration.
NEW
5ta1da said:
Are you tries restarting phone with button combo?
Using a particular combination of buttons, you can force your Galaxy S10, S10 plus, and the S10e to restart the system. Here’s how to do this.
Press and hold the Power button and the Volume Down button simultaneously until the device screen turns off.
May need to press and hold for more than 7 seconds
It will shut down and restart automatically
If the device screen stays black and you’re unable to see if it has turned off, keep holding down the Power and Volume Down buttons until you feel a vibration.
Click to expand...
Click to collapse
Thank you for your answer! Unfortunately i tried to force restart with this combination but nothing has happened... it's very weird, tomorrow i will return at home and i will go in a samsung point for the check up. I will write update as soon as i will understand what happened :/
After few days the assistance told me that the cause of the problem was water (wasnt it waterproof?) so i have to change power and volume buttons. Very disappointed
Must still be at the store
same thing
I was looking for some infor. My powerbutton stopped working. The fingerprint sensor works but not the power button. I wanted to take a few shots underwater. Maybe just 10 inches underwater and this happend. Looks like its not so waterproofed. I got lucky that the device was on. It looks like if it get off there is no way to turn it on.

Categories

Resources