I know many of you wanted this update so here it is :
Grab Vitaliy Kernel v25-40 from here : http://dev-host.org/X6T
Just flash it via FeaMod Recovery, you know the drill.
Changelog :
~ Increased Loudness ~
~ Implemented TinyRCU ~
~ Works well with stock roms also ~
~ Supports boot animation but no boot animation present ~
~ Supports init.d ~
~ Exploding 2D score [not activated by default] ~
To activate it you need to edit the build.prop file with this :
Code:
debug.gr.swapinterval=0 to build.prop
Grab Vitaliy Kernel v25-49 from here : http://goo.gl/q6yKr [thanks to Rhonin86]
Changelog :
~ Tree RCU > RCU fanout = 2 instead of TinyRCU in version 29-40 ~
~ Increased volume for voice calls ~
Grab Vitaliy Kernel v25-54 from here : http://goo.gl/YB8qj [thanks to Rhonin86]
Changelog :
~ Tree preempt rcu ~
~ Swap enable ~
~ Revert interactiveX changes ~
~ More cpu tweaks ~
~ TinyRCU and sound gain +7 ~
Grab Vitality ™ Kernel v.26.10 from here : http://goo.gl/L9ixr [thanks to 32bit]
What's new :
~ Tiny preempt RCU for small systems ~
~ O/C up to 1800MHz ~
~ Ondemand governor tuning ~
~ some sound tuning ~
~ various improvements ~
~ previous tweaks are still here (voltage control, governors, schedulers etc) ~
Grab Vitality ™ Kernel v.26.21 from here : http://goo.gl/FoHe6 [thanks to 32bit]
What's new :
~ improved SD cards mounting reliability ~
~ now the system boots up at default CPU frequency 1400MHz ~
~ O/C up to 1800 still available ~
Grab Vitality ™ Kernel v.26.23 from here : http://goo.gl/2WzZG [thanks to 32bit]
What's new :
~ yet another approach to SD-cards stability (16GB+) ~
IMPORTANT [thanks Rhonin86] :
After flashing this kernel the SD Card won`t mount anymore because of a former installed Adrenaline Shot, so you will need to do this :
1. Remove Adrenaline Shot by flashing this flashable zip : http://goo.gl/Pb1ny
2. Flash the exAdrenalinShot flashable zip : http://goo.gl/QzfR1
The SD Card will mount again!
All credits go to Vitaliy! Wonderful job !
Vitaliy`s GitHub : https://github.com/vitaliyy
You could press "Thanks" while you`re downloading this
Is this with the exploding 2D score or with the save one?
Is it usable on a stock rom?
Sent from my GT-I9001 using XDA
there is not animation at boot why? thanks
psyqiq said:
I know many of you wanted this update so here it is :
Grab Vitaly Kernel v25-40 from here : http://mir.cr/TVTNTAZL
Just flash it via FeaMod Recovery, you know the drill.
~ No changelog unfortunately ~
You could press "Thanks" while you`re downloading this
Click to expand...
Click to collapse
It would be nice if you post the changelog too !
Changelog:
After ruducing meanwhile the loudness the loudness was rised again - So be carful !
TinyRCU was implemented. Information about TinyRCU
For further changelog have a look @ Vitaliy's GITHub
or contact him directly Vitaliy_y
Cheers
Rhonin
uberto.costanzo said:
there is not animation at boot why? thanks
Click to expand...
Click to collapse
Did you have a bootanimation before installing ? If so than the provided *.zip has deleted it. AFAIK the kernel supports bootanimations and every time i installed it my bootanimation remains. Try the following *.zip i use by myself. I modified a version provided by 32bit (THX to HIM )
Is this with the exploding 2D score or with the save one?
Is it usable on a stock rom?
Click to expand...
Click to collapse
The one in the attachment is without the exploding 2D score so it is save If it is usable with stock Rom can't tell you.
Cheers
Rhonin
update to V47? thx
unfortunately i can`t find the changelog.
i believe this works well with stock roms also. Try it yourselves.
i dont know if it`s the one with the exploding 2D score.
i have no knowledge of the v47 version.
it may not have boot animation.
Not on GITHUB
prescott66 said:
update to V47? thx
Click to expand...
Click to collapse
Where did you get the information from ? Did you find it somewhere in the russian forum ? I agree with psyqiq - there is no "official" release named 25-47...
Please post the link to your source...
Cheers
Rhonin
unfortunately i can`t find the changelog.
Click to expand...
Click to collapse
There are all information needed
it may not have boot animation.
Click to expand...
Click to collapse
It has no separate bootanimation, but it supports bootanimation.
i dont know if it`s the one with the exploding 2D score
Click to expand...
Click to collapse
No this feature isn't activated. It can be activated with
Code:
debug.gr.swapinterval=0
to build.prop. Have a look @ Jupiter ROM description
I hope it helps...
Campai
Rhonin
Supports init.d?
just SIMPLY look at https://github.com/vitaliyy/i9001
in file ".version" is latest version of kernel...
support for init.d
alexis! said:
Supports init.d?
Click to expand...
Click to collapse
Yes it supports init.d.
here is an abstract from a pm:
Hello, all of changelog in my github repo https://github.com/vitaliyy/i9001
hmmm, last changes:
- test TinyRCU
- small sound boost in SP and HP
This sources was forked from one of the oldest sources Manvery FeaCore.
I'm added many patches from Tiaman, Kali, Cyanogen, DoomLord sources for MSM7x30,
Click to expand...
Click to collapse
---------- Post added at 05:40 PM ---------- Previous post was at 05:35 PM ----------
prescott66 said:
just SIMPLY look at https://github.com/vitaliyy/i9001
in file ".version" is latest version of kernel...
Click to expand...
Click to collapse
...but i can't find / see it there. I use this Vitaliy GITHUB and look at the right side of the page under Public Activity feed and there is no "official" download available...
Maybe the desired version must be compiled ? I can't do it....
Cheers
Rhonin
Works well with stock rom (in my case KQ7).
What I like of this Kernel is that it has the normal compression ratio of the photos, so the quality is also good at the computer with your 5 mp.
what is so special about this kernel?
OC?
Finally released by Vitaliy Version 25-49
Hi guys,
Vitaliy has released the new version 25-49.
All credits go to him
I just take the boot.img and integrate it in the attachment.
Changelog:
Tree RCU -> rcu fanout = 2 instead of tinyRCU of Version 29-40
this is a testversion for the above mentioned RCU-Versions
more power volume voice call in receiver
Enjoy
Rhonin
I installed this over simplistic rom and my internal sd wasn't being read. Do i need to mount something?
Sent from my GT-I9001 using xda premium
omarmakki said:
I installed this over simplistic rom and my internal sd wasn't being read. Do i need to mount something?
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
are you using adrenaline or thunderbolt tweaks? remove please sdcard speed fix.
---------- Post added at 10:47 PM ---------- Previous post was at 10:43 PM ----------
Rhonin86, in 49 version Tree RCU, in 40 version Tiny RCU, I'm looking for the best RCU, because there are no recommendations for small systems such as Android phones with small RAM
vitaliy_y said:
are you using adrenaline or thunderbolt tweaks? remove please sdcard speed fix.
Click to expand...
Click to collapse
Not sure if simplistic has any of the tweaks, but i havent done anything by myself!
Sent from my GT-I9001 using xda premium
the sd card can't be mounted after installing this kernel
Aronka said:
the sd card can't be mounted after installing this kernel
Click to expand...
Click to collapse
Think youll have to reboot
Sent from my GT-i9001 @ LionROM
I can't see my SD card too.
Related
PYD-X ExClusiVe KerneL!
Features:
-Based on HTC kernel from 3.33 (thanks to SebastianFM for the very clean kernel base - REBASED on CM source from 4.x versions)
-Included mpdecision/thermald binaries property of SebastianFM, huge, big, biggest credit to him!
-Lots improvements to performances!
-Addedd many i/o shedulers (cfq,bfq,deadline,sio,vr,noop)
-Tweaked these shedulers
-Improved CPU configuration
-3D GPU OC!
-Disabled Fsync
-Lots of modules so improved boot up time
-Improved Sched_fairs
-OTG Support - Addedd OTG Helper as app to Mount FAT32/NTFS usb drives
-Addedd Sweep2wake (as requested by users ) --- Huge thanks to GhostXSeries!!
-Custom Board File with support to Samsung S5K3H2YX Camera (Amaze 4G camera)
-New Bluetooth drivers to give support to HCI Apps (Sixaxis, wiimote, etc...)
-Addedd XZ compression support for zImage
-Improved VM ratios and ZRam (150mb actually)
-Paging moved to ZRam
-No Performance Lock!
-Tweaked Deadile and other shedulers
-Preconfigured for best balance between Performances and Battery Life!!!
-More but i don't remember >.<
Click to expand...
Click to collapse
BUGTRACKER:
-After the use of an HCI interface (Sixaxis) the WiFi stops working, needs reboot
-S5K3H2YX Camera needs other developments... - Support Complete! Kernel needs rom-side support (correct libs,etc.)
RED=High Priority!
ORANGE=Medium
GREEN=Low
Click to expand...
Click to collapse
BETA-TESTERS:
-Elemental_fire (amaze camera tester)
-GhostXSeries
-axetilen
-Super-Android
-ganeshp
-ziaulh.ch
Downloads:
***If you have problems with kernel, probably they are caused by a script included in the aroma version. Before criticize me and before bug report, clean init.d folder and try my zip with kernel only, and if it solve your problems report me please.
--I suggest to use KERNEL Tuner App to control the kernel (CPU/GPU/Vsync/Cores): HERE // HOW TO USE IT GUIDE
-------------------------------------
° Test Version 4.1.9 = Dev-Host
---Huge changes
° Beta Version 3.8.1 = Dev-Host
---I haven't much time. So i'm updating with the latest compiled beta build, the one i'm using in daily. Enjoy.
° Stable Version 3.1 = Dev-Host
**Some users have wrong flashes with ViperS rom. Follow this guide for a fix = HERE
---Code Corrections and fixes
---CIFS module is now included in the kernel
---Adjusted GPU configuration
---Corrections to the installation ZIP, more compatibility now
---Are u a benchmark fan? Look at this post: HERE // AND HERE
° Stable Version 3 = Dev-Host
---Code Fixes
---CPU Control (clocks, screen off clocks, etc...)
---Added CMD Line Interface for clock controls
---Added GPU CMD Line as optional interface
---GPU Control (2D up to 266mhz / 3D up to 320mhz)
---Standard: 200mhz 2D Core / 300mhz 3D Core
---Standard: 1566mhz MAX Cpu / 384mhz MIN / 486mhz ScreenOff MAX
---Adjusted General Kernel Configuration
---LED timer already disabled
---2WCR Support
---Updated ZRam script
---Zip now clean all the files from other kernels that can cause problems
° Stable Version 2 = Dev-Host
---ReChanged Bluetooth drivers, HCI fixed, Sixaxis totally working!!!
---Changes to GPU configuration
---Changes to Board Configuration
---More works on Camera, more code for Amaze 4g camera support on pyramid board
---MOOORE PERFORMANCES! Yes, i love a smooth ui, specially htc sense
° Stable Version 1 = Dev-Host
---Initial Release
**How to control S2W? read HERE
**Aroma installer version with settings in the second post!
AIO Kernel MOD by axetilen & iba21 (AROMA)
NON-BOOTLOOP KERNEL VERSION + Powerful Kernel Reset:
PYD-X Kernel v4.1.9 for ViperS, Sense-o-Maniac and Elegancia - Sense 4 (all versions)
Download
PYD-X Kernel v4.1.9 for Elegancia Blitz + Pegasus + ARHD (someone tested)
Download
Requirements:
- PYD-X kernel v3.8.1, v4.1.9 or higher
- SebastianFM kernel v1.5.0, 1.5.1 or v1.5.2
- Grogg kernel is also supported but not fully functional -> Run MOD for PYD-X kernel
- ROM which supports init.d folder
- S-off and rooted phone
- The latest 4EXT Touch Recovery
- AOSP/AOKP/CM10 are NOT supported
FOR MORE INFORMATION ABOUT FEATURES AND SOME NOTES, PLEASE GO TO MY THREAD
http://forum.xda-developers.com/showthread.php?t=1866127
@Credit:
- Special thanks: iba21: please give credit to him if you think this mod is useful. Click here to see his MOD for Bricked kernel
- SebastianFM: DEV of SebastianFM Kernel
- XxXPachaXxX: DEV of PYD-X Kernel
- Ghost: for helping us
DOWNLOAD:
v1.2.2
Dropbox
Mirror - see my thread
first^^
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Github source?
Sent from my Sensation
Daiskei said:
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Click to expand...
Click to collapse
Swap support of course
blahbl4hblah said:
Github source?
Sent from my Sensation
Click to expand...
Click to collapse
Uploading
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
Good to hear
Sent from my Sensation
Thanks, will try it soon
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
thanks friend .. Now I try it immediately
Good work. :good:
its working good ..but i dint see the init.d script for vsync disabling ..did you added it some where ?
EDIT: my bad ..some how assumed Fsync as Vsync silly me :silly:
Thanks for new kernel is 2way call recording supported in this kernel?
Prinz069 said:
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
Click to expand...
Click to collapse
Don't need it, i included the init script
onaj said:
Thanks for new kernel is 2way call recording supported in this kernel?
Click to expand...
Click to collapse
No, if u need i can add it
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Taker18 said:
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Click to expand...
Click to collapse
nope ..its sense based kernel
Do we have some benchmarks yet?
Thanks a lot pacha ...and Thanks to the One who added s2w ( think it was ghostxseries) ... Gonna flash now))
...sent from my sensation xe
Hi Pacha,
I used your previous tweak pack before and it was marvelous. I haven't flashed this one yet but I am sure it has the same quality.
Keep up the good work mate.
Cheers.
Thx for your kernel, just flashed it.
I'll have to work with or frist , but as i already can notice ,strings open much mfaster as before
Sent from my Sensation using xda premium
Introducing you to the first ever Custom Kernel for Micromax A110Q Canvas 2 Plus!
WARNING:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Click to expand...
Click to collapse
FEATURES:
Swap Support Added
Added config.gz support
Clean Cache Enabled
CIFS network file system support
LZMA Compression for zImage and Gzip for ramdisk..
Enhanced hw composer.
NTFS support.
VM Dirty ratio tweaks.
Battery drop fixed. Works perfectly
Added frandom driver.
Added Ramzswap support.
Optimized apply_slack() for size and speed
Faster NOATIME and NODIRATIME mounting flags
Enabled Dynamic Filesync Control 2.0
Lock the initial TCP window size to 64K
Asynchronous I/O latency to a solid-state disk greatly increased
Enabled ARCH_POWER
Added cdrom option to UMS-lun-devices (you can now use this app: Link)
Enabled SELinux and Full support for Android 4.4
Compile vfp with neon
MTK Vermagic Hack
Various ext4 patches
ACPI sysfs.c strlen fix
Fixed memory leak on extending regions
Random: Entropy tweaks
Tune conservative for performance
New governors added:
Smartass2
LulzactiveQ
PegasusQ
ZZMOOVE
NIGHTMARE
SAKURACTIVE
InteractiveX
Intellidemand
New IO Schedulers added
ROW
ZEN
FIOPS
FIFO
VR
Click to expand...
Click to collapse
Bugs:
Some display related problems
Please report bugs in the Bugs Report section!
Click to expand...
Click to collapse
Install Instructions:
Make a full backup of your current ROM.
Place the kernel zip in sdcard and reboot to recovery.
Mount /system.
Install kernel zip and reboot!
Click to expand...
Click to collapse
Changelog:
VERSION 1.0:
Boot! (built from A116 Custom source with all features).
Almost everything working
If you want to include this kernel on your rom, please include a link to this thread in the OP.
Thanks.
Download Links:
Please read instructions before flashing!
Kash Kernel V1.0 (BETA 1)
Source: https://github.com/kashifmin/KashKernel_4.2
Click to expand...
Click to collapse
CREDITS:
@banjo0917
@varun.chitre15
@Dr-Shadow
@GuneetAtwal (for patches)
@[email protected] and @digyvijaykumar123
All members of A110Q FB group for their support and testing
XDA:DevDB Information
[KERNEL][3.4.5]Kash Kernel for A110Q, a Kernel for the Micromax Canvas 2 Plus A110Q
Contributors
kashifmin, kashifmin
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: V1.0
Created 2014-04-11
Last Updated 2014-04-11
KashKernel and Revert Patches for Custom ROMs
Kernel Download Links for Custom ROMs: (All credits to @digyvijaykumar123 )
--------------ROM--------------------------------------------------------------------------------- KASH KERNEL PATCH---------------------------REVERT PATCH
COLOR OS V1.2------------------------------------------------------------------------------- DOWNLOAD----------------------------------------DOWNLOAD
COLOR OS(akaks09)--------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
XOS V1& V2---------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
MIVO V1--------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
MIVO V2 VIBE UI------------------------------------------------------------------------------- DOWNLOAD----------------------------------------DOWNLOAD
STOCK BEAST-----------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
STOCK V1------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
STOCK V3------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
SGALAXY V1-------------------------------------------------------------------------------------- DOWNLOAD----------------------------------------DOWNLOAD
SGALAXY V2---------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
XPERIA FUSION FINAL------------------------------------------------------------------------ DOWNLOAD----------------------------------------DOWNLOAD
XPERIA FUSION-----------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
LEWA OS 5------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
CM 10.2------------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
CM 11-------------------------------------------------------------------------------------------------------------------------ALREADY ADDED IN v0.2----------------------------------------
OMNI----------------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
PURE-XPERIA---------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
NOTE 3-------------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
XTREAM-----------------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
MIUIv5_4.3.24----------------------------------------------------------------------------------------DOWNLOAD----------------------------------------DOWNLOAD
PAC-MAN-------------------------------------------------------------------------------------ALREADY ADDED IN NEW UPLOADED CHD_TO_A110Q PATCH------------------------
Reserved
The thing we were waiting for is finally HERE..........thankyou kashifmin
Great work mate....And thanks for your support
Great Work
Very Very Very Big Thanks
Great work dude
Sent from my IRIS 504q using Tapatalk
great work dude
good work dude
these options still unavailable...in whch kernel are they available?
BUG
when i switch the screen off.. it doesnt actually turn off.. the backlight is on... but is totally black..
anyway to replace the stock kernel please?
Another Bug
when i leave the screen off for sometime... then turn it back on it doesnt.... never had this problem before..
please upload a flashable zip to restore stock kernel
thanks
abhimanyu bajaj said:
when i switch the screen off.. it doesnt actually turn off.. the backlight is on... but is totally black..
anyway to replace the stock kernel please?
Click to expand...
Click to collapse
See second post for revert Patches
digyvijaykumar123 said:
see second post for revert patches
Click to expand...
Click to collapse
thanks a lot man
what about overclocking cpu and gpu?
and which one to apply to miui 4.3.24?
rxlord said:
what about overclocking cpu and gpu?
and which one to apply to miui 4.3.24?
Click to expand...
Click to collapse
Can you give me boot.img and system/lib/"module" folder of miui 4.3.24 so i will create its kernel patch and revert patch.
And over-clocking is not available right now,currently we are looking for stable version.
Revert patch link for pure xperia is not working ....
Link for miui boot.img and mods
www.passivedivision.ml/MIUI_v5_4.3.zip
And can u make a darky kernal patch for miui too
Sent from my C2305 using xda app-developers app
rxlord said:
Link for miui boot.img and mods
www.passivedivision.ml/MIUI_v5_4.3.zip
And can u make a darky kernal patch for miui too
Sent from my C2305 using xda app-developers app
Click to expand...
Click to collapse
Kash kernel is Fully stable now with 0 bugs.So i am again uploading patches for all roms.
I am adding miui in the list.....
Great Work...
Good work bro, till now I didn't found any bug and kernel is working fine with color os v1.2.:good::good:
But still performance on kernel can be increased as antutu and quadrant score were bit low.
good
digyvijaykumar123 said:
See second post for revert Patches
Click to expand...
Click to collapse
Good work bro
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your already voided warranty is now void again.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh my *** off at you.
* Really hard.
*/
Yo! This thread contains two kernels (regular and SuperLite). If you wanna see what SuperLite is, then go here. You should read everything before moving onto the downloads section.
Hiya fellas.
This is my modded kernel for our loved Moto G 1st gen. In the beginning I decided to keep it for my personal use only, but then I decided to share it with you guys since there was no custom kernel compatible with the 5.1 stock rom.
Features:
Sources & Optimizations
- Based on Motorola's shared falcon/peregrine source
- Compiled with generic Linaro 5.3 toolchain
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- HID Driver (Use your phone as a USB keyboard/mouse)
- Compass & Accelerometer drivers now use State Notifier
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Regular Version
Overclock-Ready Version
Click to expand...
Click to collapse
Looking for previous releases?
- All releases until 1.2.3: Go here
- All releases from 1.3 onwards: Go here
- KaminariLite (discontinued): Go here
- KaminariSL (previously Optimized Stock): Go here
Click to expand...
Click to collapse
Got into trouble and need to go back to the stock kernel?
Then you should click this link here, bud!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!!)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- (Optional) Wipe cache and/or ART cache
- Reboot and have fun!
Coming from another kernel? Then I suggest you to (at least!!!) dirty flash your stock rom and kernel in order to avoid any issues!
Wanna tweak it? Use Kernel Adiutor! (I do NOT support Synapse!!!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (Lollipop-Falcon), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/L
Kernel Special Features: Read above!!!
Version Information
Status: Stable
Current Stable Version: R3
Stable Release Date: 2016-07-07
Created 2015-09-07
Last Updated 2016-07-09
F.A.Q. (Read this before crying!!!!)
Q: Why did you develop this kernel?
A: Read the OP.
Q: ERMAHGERD DIS KERNEL SUCKZ, MAH BATTERY IS DEAD IN 30 MINS, PLZ HALP!
A: When I created this kernel, I never had the intention to have it decrease battery life. So before / instead of complaining, go check your f***ing wakelocks and fix them! The kernel isn't responsible for this, your apps and/or services are.
Q: Will this kernel work on AOSP/CM12.1/CM13 ROMs?
A: Go here for that.
Q: Will this kernel work on the GPE ROM?
A: Yes. And it'll also allow you to use this ROM without having to format /data to ext4.
Q: How do I report bugs?
A: If you wanna report a bug, then grab your kernel log - either by pulling /proc/last_kmsg (in case of a random reboot / kernel panic or oops) or copying the output of "dmesg" via shell - and paste it at pastie.org and link it in your post (or save it to a text file and attach it to your post). Don't bother getting logcats, they don't apply for kernel debugging purposes.
Q: How do I flash this?
A: I suggest you scroll up and read the OP. The instructions are there.
Q: How do I tweak this kernel?
A: Download Kernel Adiutor from the Play Store and have fun. For Synapse, scroll up and read the OP first.
Q: This kid is such a n00b!
A: Oh well then, why don't you go work on a kernel yourself, instead of criticizing my work and, by doing so, wasting your time?
Click to expand...
Click to collapse
Kaminari SuperLite (previously "Optimized Stock Kernel")
Since KaminariLite has been discontinued, and Kaminari has become cleaner regarding features, I've been working on a version closer to the stock kernel, only more optimized.
Enter Kaminari SuperLite!
Diferences between this & the stock kernel:
- Compiled using generic Linaro 5.3 toolchain
- Bumped to Linux version 3.4.112
- Compiled with -O3 and misc optimization flags flags (Same as Kaminari)
- Most if not all of Kaminari's optimizations have been applied
- All governors except Interactive removed
- Supports both stock and GPE roms, regardless of filesystem (f2fs or ext4) used on /data
- Adds init.d support
- Default ZRAM size changed to 400MB
Click to expand...
Click to collapse
Differences between this & Kaminari:
- All governors except Interactive removed
- AutoSMP removed
- All TCP congestion algorithms except Westwood and Reno removed
- Additional I/O schedulers (zen, vr, sio, fiops, bfq) removed
- All non-essential features (FauxSound, Kcal, Dt2w...) have been removed
- Stock PowerHAL has been re-enabled
- Compressed using LZO (Kaminari uses XZ)
Click to expand...
Click to collapse
Wanna give it a try?
Click this link here!
Click to expand...
Click to collapse
Flashing & Tweaking Instructions:
Same as Kaminari.
Coming from regular Kaminari? Wipe your Kernel Adiutor data first! If you can flash the stock kernel before flashing this, it's even better!
Click to expand...
Click to collapse
Reserved!!!
Reserved again
null
Wow m first...
---------- Post added at 08:25 AM ---------- Previous post was at 08:17 AM ----------
Just flashed it...buttery smooth...smartmax works like charm and yeah happy to see the kcal screen control...thanks kaminari for this amazing kernel...
So it is only for stock 5.1 right?
Edit: Working smoothly on stock 5.1
Keep it up.
Working great on XT1031 with stock 5.1. Nice job!
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
akshayk01 said:
@kingkaminari thanks for kernel. Any chance in future to add support for Aosp roms? that would be great.
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
No, no plans for aosp/cm support yet - mainly because of my limited knowledge. But i'll consider making a version supporting these two
New build in the works! Just trying to fix a bug where all CPU cores stay online (needless to say that this causes a gigantic battery drain)
New build up!
https://www.androidfilehost.com/?fid=24052804347811341
https://www.androidfilehost.com/?fid=24052804347811344 - "Mori" version - with S2W/DT2W
Changelog here.
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
amarc78 said:
I'm getting an update binary execution error with TWRP, with both new builds. I tried disabling the device check in the anykernel.sh but no go. Also, I noticed in the init.kaminari.rc file in the zip, there is a typo in the power mode lines. It has 2 lines for cpu2 and none for cpu3. I just noticed the same thing with Optimus V41 Prime earlier today.
Click to expand...
Click to collapse
The previous zips i made here worked fine (i flash them through adb sideload). And i just fixed the init.kaminari.sh. Plus i've fixed s2w/s2s in the Mori version (dt2w is still partly broken though).
New build up!
Version: 0.96b
Download: Regular Version | "Mori" Version (DT2W)
Changelog here, but for those who don't wanna go there:
- Fixed s2w (dt2w halfscreen is still broken)
- Fixed derp in init.kaminari.sh
GPE users, please test my builds if you can / feel courageous enough to do it
I give up, except for the first build, they won't flash in recovery for me.
amarc78 said:
I give up, except for the first build, they won't flash in recovery for me.
Click to expand...
Click to collapse
I'll upload a zip without anykernel later. Btw, which version of twrp are you on? And do you have sufficient space in /system? Because this kernel pushes modules to it. I'm on twrp 2.8.7.0 + a modified stock rom, and i've had zero flashing errors so far
For those who are having problems with anykernel, i've uploaded special flashable zips without it.
Version is still 0.96b.
Downloads: Regular | DT2W
Version 096b flashed without any problems.
Just put the zip in the root of internal storage.
cool everything is just superb @kingkaminari hope you keep updating this kernel
I had sold my Nokia X2 and stop support for Nokia X2
Hi all! Today, i was built a kernel with some tweak
and now i will share it to you
MK Kernel v1.0
Code:
Only for CM-11-20160111
Code:
Tweak:
-Added some CPU Governor: intellimm, intelliactive, optimax, intellidemand, conservative
-Added some I/O Scheduler: sio, zen, vr, fifo, sioplus
Code:
Download: [URL="http://d-h.st/AWXy"]http://d-h.st/AWXy[/URL]
Code:
Flashing:
download the .img, reboot to recovery, select: Install > Image > choose .img>Boot> slide right to flash > reboot system and enjoy
about CPU Governor and I/O Scheduler, read here for more information
Thanks to @zombah
Kernel version: 3.4.110
Compiled with Sabermod 4.7 Toolchain
Source: https://github.com/cm-nokia-x2
Up
Add some features to it, like double-tap to wake up support,init.d support,
is it good ???
how I can install it
Thanks bro
Wölveîne said:
Add some features to it, like double-tap to wake up support,init.d support,
Click to expand...
Click to collapse
of course. i'm trying to add this https://github.com/ryanaepple/android_kernel_motoe/commit/080003bc8e61349bf7c8da00fa6923f3c84d1927
Good Work! +Smartv2 governor
Could I flash this kernel for xperience ROM? Would I be able to get any benefits?
kaotd99 said:
of course. i'm trying to add this https://github.com/ryanaepple/android_kernel_motoe/commit/080003bc8e61349bf7c8da00fa6923f3c84d1927
Click to expand...
Click to collapse
Thnx,and make it more advance
And our kernal supports init.d? Or not
Wölveîne said:
Thnx,and make it more advance
And our kernal supports init.d? Or not
Click to expand...
Click to collapse
cm11's kernel is already support init.d. we don't need to add it more
kaotd99 said:
cm11's kernel is already support init.d. we don't need to add it more
Click to expand...
Click to collapse
Oky,then is it possible to get Native Move To Sd support via some modifications?
whether it can for another rom-based CM11?
user explaination please :cyclops::cyclops:
So whats now?,there's a new build 13 available-you need to recompile kernel for this build.and also viperfx,dolby digital plus too as in the new version there are several fixes in the framework!!
Wölveîne said:
So whats now?,there's a new build 13 available-you need to recompile kernel for this build.and also viperfx,dolby digital plus too as in the new version there are several fixes in the framework!!
Click to expand...
Click to collapse
in build no 13 I have tried DDP v2 and the old mod of disable internal memory and it did work for me
any one help me please
how I install this
sweezit92 said:
in build no 13 I have tried DDP v2 and the old mod of disable internal memory and it did work for me
Click to expand...
Click to collapse
It will work but there is a probability of low performance, bcz there are new framwork service. Jar etc if we flash old then it will be mixed with our new update.mixing old part of system with new ,not good
Wölveîne said:
It will work but there is a probability of low performance, bcz there are new framwork service. Jar etc if we flash old then it will be mixed with our new update.mixing old part of system with new ,not good
Click to expand...
Click to collapse
Yes i agree but as long we dont have updated file we cant use those features......that is why i mix these things
---------- Post added at 05:33 AM ---------- Previous post was at 05:32 AM ----------
Saged 22 said:
how I install this
Click to expand...
Click to collapse
Your question is not clear buddy....there are whole lot of things to install so which thing you want to install?
My SD card Could not be detected after I flashed this kernel?
shafiaszad said:
My SD card Could not be detected after I flashed this kernel?
Click to expand...
Click to collapse
use it without disable internal memory mod!
NxKernel
r4
Yeah, jet another kernel for the falcon!
Why? You might ask and you are right.
I have been experimenting with kernel features, fixes and (alleged) improvements and always tried to create a kernel which I would be happy to use every day on my device. You know the usual stuff: long lasting battery with lag-free performance... It's not easy at all I have to tell. I am not a developer but know my way around Git and programming and researched a lot of sources on the internet looking for kernel stuff. Some patches offer improvements in speed and response time etc, but in reality, many of them do more harm than good when it comes to real-life praxis. In the end, I had a great collection of fixes and patches which I tried (nearly) one-by-one examining the gains and losses of 'em.
All the credits go to the developers of the features - and a little of it to me for putting them together and bringing them to the Moto G.
Features
Compiled with UBERTC 4.9.4 and O2 optimization level
Overclocked [email protected], [email protected], [email protected]
Intelliplug 4.0 CPU hotplug
Intelliactive and Intellidemand CPU governor
PowerSuspend 1.5
Intellithermal v2
Simple GPU Algorithm
Adreno Idler
Power Efficient Workqueues
Fast Charge v2
Dynamic fsync
Enabled NEON mode
Westwood TCP congestion control
Frandom fast random number generator
Wakelock toggles
Click to expand...
Click to collapse
Installation
Download the kernel to your device from the link below
Reboot to recovery
Flash the kernel
(optional) Wipe cache & dalvik cache (recommended)
Reboot
(optional for CM13 - bootloop on CM14) If you would like to enable frandom, copy the 20frandom script (by Ryuinferno, see attached) to system/etc/init.d and change its permissions to 0755.
Click to expand...
Click to collapse
Download
CM14.1/Lineage OS: r4 - https://www.androidfilehost.com/?fid=673368273298920933
CM13: r2 - v1.1 - https://www.androidfilehost.com/?fid=385035244224396903
Please do not mirror any of my files!
I switched to "r" naming scheme which means r1 (v1.0) and r2 (v1.1) are for CM13 and releases from r3 upwards for CM14.1 and Lineage OS.
Click to expand...
Click to collapse
Sources
https://github.com/NStep/android_kernel_motorola_msm8226/tree/cm-14.0-nx
Click to expand...
Click to collapse
Recommended settings in 2nd post.
Changelog in 3rd post.
Many thanks go to:
The CM Team
faux123
arter97
Hurtsky, Kaminari, pinkflozd, alinp, BryanByteZ
soniCron
...and the community for keeping alive a 3-year-old device :highfive:
Click to expand...
Click to collapse
If you would like to help or thank me, you might buy me a beer/coffe/coke to fuel the development.
XDA:DevDB Information
NxKernel, Kernel for the Moto G
Contributors
NxStep
Source Code: https://github.com/NStep/android_kernel_motorola_msm8226/tree/cm-14.0-nx
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r4
Stable Release Date: 2017-01-03
Created 2016-10-21
Last Updated 2017-01-03
Recommended settings
I suggest Kernel Adiutor to edit the kernel settings. See attached screenshots for the details. The settings that cannot be seen on the pictures are untouched.
I've attached the two json files to import for the two custom controls in Kernel Adiutor, bluedroid_wakelock and USB_fast_charge. To be able to import directly just change the extensions to json.
*For CM13 only! Causes bootloop on CM14 for now.*
Also attached the frandom enabler script (20frandom) that is to be placed in system/etc/init.d wit the permission 0755. Make sure you remove the txt extension first!
Sorry for the extension messing, xda does not allow to upload json files or files without extension... I might move the files to my file host soon.
CPU governor tunables
*to be updated for CM14*
Optimized governor tunables based on soniCron's superb guide. It works with interactive and intelliactive as well and scales fine with overclocking enabled and disabled too.
Basically, it uses 4 optimal frequencies: 300MHz, 998MHz, 1190MHz and 1593MHz if OC enabled. It prevents the CPU jumping a lot between frequencies that do not provide enough performance for a given task. I managed to get 4-5 hours of screen on time with these settings.
Tunables are as following:
Code:
above_hispeed_delay: 20000 998400:60000
boost: 0
boostpulse_duration: 80000
go_hispeed_load: 75
hispeed_freq: 998400
io_is_busy: 1
min_sample_time: 40000
sampling_down_factor: 0
sync_freq: 0
target_loads: 98 384000:56 600000:31 787200:27 998400:82 1094400:9 1190400:95 1305600:3 1344000:4 1401600:7 1497600:6 1593600:85
timer_rate: 25000
timer_slack: 80000
two_phase_freq: 998400,998400,998400,998400
up_threshold_any_cpu_freq: 998400
up_threshold_any_cpu_load: 95
Changelog
r4 - 03.01.2017
merged latest CM14.1 kernel sources
update to latest prebuilt toolchain UBERTC 4.9 by mdalexca
added some additional patches, see Github
r3 - 25.11.2016
intial release for CM14.1
merged latest CM14.1 kernel sources
switched to "r" naming scheme
r2 - v1.1 - 11.11.2016
merged latest CM13 sources
r1 - v1.0 - 21.10.2016
initial release
Reserved another just in case.
NxStep said:
NxKernel
v1.0
Created 2016-10-21
Last Updated 2016-10-21
Click to expand...
Click to collapse
Downloaded and installed a couple of hours ago.
Feels smooth and snappy. Have not encountered any glitches.
I'm running [7.0.0_r14]AOSP+OM
Thank you for bringing another kernel to this old device.
this kernel have multirom support?
thanks for your amazing work
Pretty nice idea man, I'll test it. Thanks for this kernel
Thank your for your feedback!
aldanopolis said:
this kernel have multirom support?
thanks for your amazing work
Click to expand...
Click to collapse
No, it doesn't. I haven't really examined this feature as I use only one ROM on my phone. But I might add it in the future if it is requested.
NxStep said:
Thank your for your feedback!
No, it doesn't. I haven't really examined this feature as I use only one ROM on my phone. But I might add it in the future if it is requested.
Click to expand...
Click to collapse
IMHO, As we have no kexec workaround in last version of multirom , this is not mandatory.
Any way to backup the stock kernel of Orion Os in case I find any issue with this kernel?
Guillosd said:
Any way to backup the stock kernel of Orion Os in case I find any issue with this kernel?
Click to expand...
Click to collapse
Use Flashify
It has the option to backup the current kernel and can also flash imgs, zips and stuff.
Good to see another kernel available for our old (but seemingly immortal?) phone. Best of luck to you!
Like Kamin4ri said thanks for the kernel i really hope that moto g be immortal best phone that i used for sure, good enough for what i need.
Would be great if it has dt2w...
Aayushya said:
Use Flashify
It has the option to backup the current kernel and can also flash imgs, zips and stuff.
Click to expand...
Click to collapse
nandroid restore would work as well ,right?
Hiraethic said:
nandroid restore would work as well ,right?
Click to expand...
Click to collapse
Yes
everything works awesome on aosp 7.0 by srisuriya
Skarni said:
Downloaded and installed a couple of hours ago.
Feels smooth and snappy. Have not encountered any glitches.
I'm running [7.0.0_r14]AOSP+OM
Thank you for bringing another kernel to this old device.
Click to expand...
Click to collapse
Did you change any settings in Kernel Auditor?
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
NxStep said:
Recommended settings
~snip
[/CODE]
Click to expand...
Click to collapse
Those pictures on second post are recommended settings?
kamesh_kraken said:
Did you change any settings in Kernel Auditor?
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
Those pictures on second post are recommended settings?
Click to expand...
Click to collapse
I did apply some of the settings from the pictures. I chose different scheduler and network TCP algorithm.
I do not have the paid version of Kernel Adiuitor, so I was not able to use the .json files.
Skarni said:
I did apply some of the settings from the pictures. I chose different scheduler and network TCP algorithm.
I do not have the paid version of Kernel Adiuitor, so I was not able to use the .json files.
Click to expand...
Click to collapse
Use a mod, kernel adiutor is open source