Database Info

ADB help!

I'm very unfamiliar with adb and I'm wanting to unroot my thunderbolt and return it to stock. Anyone willing to help me with ADB?

DONT KNOW ADB.. BUT CAN HELP U UNROOTING UR PHONE
ok u can do this.. follow carefully..
1. go into recovery
2. make sure u have the nandroid backup in ur sd card
3. wipe data, cache, dalvik cache, sd ext..
4. download the first file
5. flash from recovery
6. this will format ur total system
7. now restore nandroid backup
8. u will go back to stock rom..
9. now download the 2nd file
10. install z4root and open it.. click on "unroot"
11. follow instructions if any
12. reeboot..
u will have a phone as good as new..

xTommyx23 said:
I'm very unfamiliar with adb and I'm wanting to unroot my thunderbolt and return it to stock. Anyone willing to help me with ADB?
Click to expand...
Click to collapse
DONT KNOW ADB.. BUT CAN HELP U UNROOTING UR PHONE
ok u can do this.. follow carefully..
1. go into recovery
2. make sure u have the nandroid backup in ur sd card
3. wipe data, cache, dalvik cache, sd ext..
4. download the first file
5. flash from recovery
6. this will format ur total system
7. now restore nandroid backup
8. u will go back to stock rom..
9. now download the 2nd file
10. install z4root and open it.. click on "unroot"
11. follow instructions if any
12. reeboot..
u will have a phone as good as new..

here are some basic things to know
xTommyx23 said:
I'm very unfamiliar with adb and I'm wanting to unroot my thunderbolt and return it to stock. Anyone willing to help me with ADB?
Click to expand...
Click to collapse
Have a look at this http://forum.xda-developers.com/showthread.php?t=872128
The first thing a noob (like me) needs to understand is directory path.
For example i have installed my ANDROID-SDK folder in the root of my computer, (also known as C drive) the "tools" folder is in the androidsdk folder and the "adb" is in the tools folder.
C:\androidsdk\tools\adb
If you move or rename a folder your commands must be the same.
C:\ANDROID-SDK\tools\adb help will not work on my computer because i dont have a folder named ANDROID-SDK I re-named it androidsdk so that is the command i must use C:\androidsdk\tools\adb help
C:\androidsdk\tools\adb help
Android Debug Bridge version 1.0.26
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this ocmmand with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.

Good one....thx

lest we forget
lmao, so here i am almost a full year since i posted in this thread....learning adb all over again!! too funny
has anything changed since then ?

How to perform full backup using ADB w/o touchscreen on PIN locked device (rooted)

My device screen cracked and killed the digitizer. The LCD is fine but I obviously can't interact with it. The device is fully encrypted, and while I have the password, I seem to have no way to unlock it (I don't have an MHL dongle to run a mouse). I'm sending the device back to LG for factory repair, but I'd like to make a full backup before I do. I thought this would be trivial with ADB but I can't seem to get things working and my suspicion is the device encryption is my problem. I'm running TWRP (I tried cwm first but couldn't get that to read by already-encrypted device, which I hear is a know issue somehow 4.2.2 related - I gave up caring about that when TWRP "just worked").
Anyway, what's the process to get a full backup? I've tried following the good tutorial on 'thesuperusersguide' (sorry I'm new xda-dev so I can't post the proper link) but the backup command get's ignored (see scrollback, below). My gut says there's something I need to send to my device to mount the encrypted partition, either a command or adb push a special file then reboot. Am I on the right track?
I thought this was supposed to be as simple as "plug in the device, make sure ADB can see it, then run ADB backup". Obviously I need a some cmdline args to get the backup to get all my data - that's not what I'm asking about. I'm asking the "previous step" that could be paraphrased as, "how to get adb backup to do *anything*?"
Code:
host:platform-tools user$ ./adb devices
List of devices attached
006854cc1d8e2d9e recovery
host:platform-tools user$ ./adb backup
Android Debug Bridge version 1.0.31
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
host:platform-tools user$
FWIW this is a Nexus 4 running 4.2.2 rooted cm-10.1-20130304-EXPERIMENTAL-mako-M2 TWRP 2.4.4.0.
Feel free to link me to other threads. I tried both forum search and Google and really couldn't find anything useful to my cause. Also, thanks everyone!

AW: How to perform full backup using ADB w/o touchscreen on PIN locked device (rooted
What about flashing a non touch recovery via adb?
I don't know whether there are some for the n4 since it is a very new device but for my HTC Desire there are some you can control via volume and power buttons.
Tapatalked with my JellyBean powered HTC Desire

I have a One Mini, help needed.

Hello there people,
I am lucky enough to be in possession of a newly un-released HTC One Mini (proof seen below).
I am your loyal servant so let's get this thing rooted. Tell me what to do and I will do anything I can to help. :good:

guywithdesire1992 said:
Hello there people,
I am lucky enough to be in possession of a newly un-released HTC One Mini (proof seen below).
I am your loyal servant so let's get this thing rooted. Tell me what to do and I will do anything I can to help. :good:
Click to expand...
Click to collapse
would you mind getting in touch with me so i can assist in full system dump
thanks bud

Check your PMs mate.
Sent from my Evita

timmaaa said:
Check your PMs mate.
Sent from my Evita
Click to expand...
Click to collapse
Yeah
Sent from my HTC One S using xda premium

https://github.com/zarboz/android_vendor_htc_m4
https://github.com/zarboz/android_device_htc_m4
Just need to grab his zImage and should be set

How u like that mini bro?
Sent from my HTC One XL using Tapatalk 4 Beta

Moved To Q&A​
Please do not open question threads in a dev section​

https://mega.co.nz/#!Q4Q2CIBY!bLmngjjawQueqw3_y_WTPl5BqGVChnIj2MHGXvPgQ6Q
HTC One mini dump

OP,
Could you run the following commands and then post the file and zip up the folder they make? (Run the first from terminal emulator, second from computer)
Single file (will be in sdcard)
Code:
dd if=/dev/block/mmcblk0p32 of=/sdcard/boot.img
Folder (will be on computer, zip up and upload please)
Code:
adb pull /data/preload
Sent from my buttered S3

CNexus said:
OP,
Could you run the following commands and then post the file and zip up the folder they make? (Run the first from terminal emulator, second from computer)
Single file (will be in sdcard)
Code:
dd if=/dev/block/mmcblk0p32 of=/sdcard/boot.img
Folder (will be on computer, zip up and upload please)
Code:
adb pull /data/preload
Sent from my buttered S3
Click to expand...
Click to collapse
the boot partition is read protected and so is /data without root
we need temp root to dump the boot partiion for me to build him a working recovery

CNexus said:
OP,
Could you run the following commands and then post the file and zip up the folder they make? (Run the first from terminal emulator, second from computer)
Single file (will be in sdcard)
Code:
dd if=/dev/block/mmcblk0p32 of=/sdcard/boot.img
Folder (will be on computer, zip up and upload please)
Code:
adb pull /data/preload
Sent from my buttered S3
Click to expand...
Click to collapse
Cannot run, permission denied.
C:\Users\Dan>cd c:\android
c:\android>dd if=/dev/block/mmcblk0p32 of=/sdcard/boot.img
'dd' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
c:\android>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ $ adb pull /data/preload
adb pull /data/preload
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
1|[email protected]:/ $ ^C
c:\android>adb pull/data/preload
Android Debug Bridge version 1.0.31
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_S
ERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --
iv <hex-encoded iv>] <file>
- push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
c:\android>
Click to expand...
Click to collapse

You didn't type the second command correctly...there should be a space between "adb" and "/data/preload".
For the first command, run this instead (from your computer)
Code:
adb shell
dd if=/dev/block/mmcblk0p32 of=/sdcard/boot.img
exit
adb pull /sdcard/boot.img
And then upload the boot.img that should be in your current folder on your computer
If still nothing, please PM me so we can set up a team viewer and I can try to pull those files and I can also try to root your phone (safe, nothing bad will happen if it fails)
Sent from my buttered S3

Deodexed dump
Thank OP
http://www.androidfilehost.com/?fid=23060877489997282

Hi,
scine some days I own a htc one mini and I need to "root" it.
What is the best place to get started?
I'm very firm with linux, so I think i can do something
(I switched back from ios after some years of using iphone)

fvdaak said:
Hi,
scine some days I own a htc one mini and I need to "root" it.
What is the best place to get started?
I'm very firm with linux, so I think i can do something
(I switched back from ios after some years of using iphone)
Click to expand...
Click to collapse
PM me so we can set up teamviewer and try to root your phone
What's in it for me is that I really need the One mini's boot.img

CNexus said:
PM me so we can set up teamviewer and try to root your phone
What's in it for me is that I really need the One mini's boot.img
Click to expand...
Click to collapse
Would be great if you could get the recovery.img also.

Flyhalf205 said:
Would be great if you could get the recovery.img also.
Click to expand...
Click to collapse
If I can dump the boot.img then he can dev unlock and I'll pass him an insecure boot.img through which he can gain root.
Or if he gains root through another method, then we can still dump everything.
After that, life is good.
Anyway, still waiting for a response.

Hi,
I can confirm, what guywithdesire1992 said:
There is no permission to open the device.
When I do "dd if=/dev/block/mmcblk0p32 of=/sdcard/boot.img", I get the following error:
/dev/block/mmcblk0p32: cannot open for read: Permission denied
Do you have any suggestions?

btw:
There is no "su" on the device.
I've tried to install static linked su from "SuperUser.apk" and also from "CWM-SuperSU" - without success.
I have stored the su executables to /data/local/tmp and gained executable-rights (chmod 777). After that I was able to execute it, but i does nothing.
No error, just nothing

PM me so we can set up teamviewer and try to get you rooted.

[Q] Need help using ADB to push files to my MAXX HD

I have a stock factory ROM, ROOTED, MAXX HD. It's on the latest firmware pushed by VZW. After rooting, I had removed a bunch of apk's I knew I wouldn't need. The problem happened when I did a factory reset due to some minor GPS issues. I had forgotten that I removed the Setup.apk. (Yes I'm kicking myself regarding backups... but too late now).
Now my MAXX HD has no launcher. It states the Setup Wizard has stopped working. I have no access to files or applications. I can access the notification bar and the systems menu and such and can see the standard programs running under APPS. Wifi works, etc. I even signed into my gmail accounts, but I don't have access to any apps. Pressing the home button does nothing except bring up the error message again.
I've been trying to use ADB to push the missing files into the /system/app folder and that is described below. If anyone has any other ideas on what I can do, I'm all ears.
This part is for those that know a thing or two about ADB. I'm a noob at this so please correct away!
So, my ADB exploits... I've tried to push the setup files to /system/app via adb but have had no luck. I keep coming across access denied or this action is not allowed in production phone, etc.
The commands I've used are:
adb push setup.apk /system/app/setup.apk (This just gives the copy protected blah blah)
remount and root don't work.
in shell, when I type "su" the "$" does change to "#"
I've remounted the system as rw but pushing the file still gives me a not allowed value.
I'm just going to list the commands I've used now. If anyone has any suggestions or if I'm doing it wrong, please correct away. Thanks!
adb shell (this gives me a @Vanquish:/ $)
su (this changes the $ to a #)
mount | gret system (this gives me a long device-system name. it indicates it is now rw. it was originally ro)
mount -o rw, remount <device name from the previous command> /system
exit
exit (back to C:/adb)
adb push setup.apk /system/app/setup.apk (still says not allowed) (the root and remount commands still don't work)
I read that I need to type in "adb shell su push..." but I cannot get that command line to work at all.
Any help is extremely appreciated. Thanks!

Solved it myself
I guess I need to brush up on my ADB.
I got it to work by pushing the files to /sdcard/, then in shell, used # cp /sdcard/<file> /system/app/<file>
To all the ADB guys out there, how could I have done this in 1 step? I definitely don't have the syntax down.

T0ked said:
I guess I need to brush up on my ADB.
I got it to work by pushing the files to /sdcard/, then in shell, used # cp /sdcard/<file> /system/app/<file>
To all the ADB guys out there, how could I have done this in 1 step? I definitely don't have the syntax down.
Click to expand...
Click to collapse
Android Debug Bridge
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.

[Q] HELP bootloop

Hello everyone, my name is Massimiliano, I'm Italian and I have a problem with my MWG409, I modified the build.prop (but luckily I have a backup) and now the phone is in bootloop I can get into the stock recovery, but I have a problem the phone considers the internal memory Esternal like that and I do not know how to solve. thanks in advance

bamcam92 said:
Hello everyone, my name is Massimiliano, I'm Italian and I have a problem with my MWG409, I modified the build.prop (but luckily I have a backup) and now the phone is in bootloop I can get into the stock recovery, but I have a problem the phone considers the internal memory Esternal like that and I do not know how to solve. thanks in advance
Click to expand...
Click to collapse
Hi,
Can you see your Excite MGWG409 when you connect it to your PC and can you use cmd line commands.
if yes, use it and especially those are red => adb reboot
Code:
ode:
C:\Users>adb /?
Android Debug Bridge version 1.0.26
-d - directs command to the only connected USB device returns an error if more than one USB device is present.
-e - directs command to the only running emulator. returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with the given serial number. Overrides ANDROID_SERIAL environment variable.
-p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed (see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
[COLOR="Red"][B] adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program[/B][/COLOR]
[B][COLOR="Red"]adb reboot-bootloader - reboots the device into the bootloader[/COLOR][/B]
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> <localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partitionis updated.

philos64 said:
Hi,
Can you see your Excite MGWG409 when you connect it to your PC and can you use cmd line commands.
if yes, use it and especially those are red => adb reboot
Code:
ode:
C:\Users>adb /?
Android Debug Bridge version 1.0.26
-d - directs command to the only connected USB device returns an error if more than one USB device is present.
-e - directs command to the only running emulator. returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with the given serial number. Overrides ANDROID_SERIAL environment variable.
-p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed (see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
[COLOR="Red"][B] adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program[/B][/COLOR]
[B][COLOR="Red"]adb reboot-bootloader - reboots the device into the bootloader[/COLOR][/B]
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> <localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partitionis updated.
Click to expand...
Click to collapse
On ADB appears an error when i use sideload "installation aborted" help i need my phone

Please you don't need to post several OP for your problem.
You have already opened an OP and I gave you an answer.
You do not need to open an another OP because your old one is no longer on the first page.
If someone can give you an answer, he will answer
And if I remember its' not:
Code:
adb push update.zip \ sdcard \
but its
Code:
adb push update.zip/sdcard
Thanks in advance for your comprehension

philos64 said:
Please you don't need to post several OP for your problem.
You have already opened an OP and I gave you an answer.
You do not need to open an another OP because your old one is no longer on the first page.
If someone can give you an answer, he will answer
And if I remember its' not:
Code:
adb push update.zip \ sdcard \
but its
Code:
adb push update.zip/sdcard
Thanks in advance for your comprehension
Click to expand...
Click to collapse
sorry, but I am very worried about the phone, however only works in adb sideload, in other ways it appears "error: closed", in sideload tells me installation aborted when I go to install my "update.zip" that contains the build.prop I need to replace, maybe I created the wrong "update.zip"

bamcam92 said:
sorry, but I am very worried about the phone, however only works in adb sideload, in other ways it appears "error: closed", in sideload tells me installation aborted when I go to install my "update.zip" that contains the build.prop I need to replace, maybe I created the wrong "update.zip"
Click to expand...
Click to collapse
Go to your recovery
Code:
adb shell
mount -o remount,rw /system
this mounts your /system partition to read and writable extract the build.prop from your update.zip and paste it in desktop
Code:
cd desktop
adb push build.prop /system/build.prop
This should push the build.prop from update.zip right back to system
Regards
MasterAwesome