Connecting to a PEAP protected network?? - G Tablet General

Ok - running C&C ROM, but I think it uses the stock networking drivers.
Is there an update or something that I can use to connect to a PEAP network? I've tried fullWifi, but my work network still doesn't show up in the wireless manager.
really frustrating. Can connect to everything else!
BN

Closed. Updated to the Beasty / Clem ROM and fixed the issue.
If anyone else needs to connect to PEAP / WSHvAC (or whatever the hell it is secondary) this ROM will do it.

Related

Raphael: Wifi can not connect to any encrypt connection, any help?

My TouchPro can connect normally to unsecured wifi networks, but with WPA encrypted ones, it can only connect for the first time, after that it can not.
At home I have a wireless router/ADSL modem (Zoom X6) that is connected to my PC by cable, all my phones and laptops connect to internet via wifi. While other phones (1G iPhone) and laptops always connect successfully, the TP only connected once and then cannot or unable connect to the WPA security-enabled wireless network (although it's able to scan and detect the availability of the Wifi network). I tried to reset the router settings, even update router firmware, but no luck, it's still unable connect. I also tried with my office secured wifi network and I had the same problem.
Yesterday, I had to hardreset my TP and tried to connect once again, but problem was repeated, connected only once and after that, unable. Note that my previous PPC (TMobile Ameo WM5) didn't have any problem with the same wifi router and the same wifi settings (as follow).
My TP wifi settings:
Network Name: MyNetwork
Connects To: The Internet
Uncheck "This is a hidden network"
Next step:
Authentification: WPA-PSK
Data Encryption: TKIP
Greyed Out: The key is automatically provided
Network Key:************** (my pass)
Greyed Out: Key Index: 1
Next,
Checked "Use IEEE 802.1x network access control" but greyed (I can't change this)
Anybody know the solution for this issue?
Thanks and very appreciated for any help.
i experienced similar problems with my old p4350 but not yet with the TP...
no solution, sorry. but im quite unhappy that this issue still exists...
Any suggestion, pls.
yeah.. quite sucky.. I though the WiFi 'broke'.. but i was able to connect to a WEP site.. I think its something to do with WPA.
I never had this problem with my Diamond. The firmware on Diamond isso much more stable compared to Touch Pro..
I set everything to WEP and my key is open instead of shared, and now it works fine.
I had issues at my dad's, who has no encryption, and also there, when I set the key to open io shared, I got connection. (even though there is no key
anyway, it looks like that is the bug (at least in my device)
I have exactly same settings and same problem... but I want to use this encrypted connection since in future I will have to connect also in other places where I need it for sure.
Any help here?
I have similar promblem with my Hermes before.
My wireless router is running "Turbo-G" mode, my Hermes can't connect it with Turbo-G mode On.
After I change the wirless mode from Turbo-G to "g/b", my Hermes can connect it without any problem.
I tryed that and does not work...
strange is that is was working in the past and on router I did no changes but on TP I installed just some apps which should not affect this...
Only what could affect is Advanced config which I installed...
So where else can be problem?
How can I troubleshoot this?
Signal kvality is good but still keeps dropping and does not obtain IP from router.
mine works fine...not that that helps you in any way
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
hung_ng said:
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
Click to expand...
Click to collapse
You are merely restricting people from connecting to your router.. without encryption, you are sending unsecure packets all over..
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
I tried the PT using unsecured routers, WEP and WPA and all of them worked fine with stable connectivity.
The routers I have tried (without any problems) so far are:
1. Linksys WRT-54G running Tomato firmware
2. Linksys WRT-54G running DD-WRT firmware
3. D-Link DIR-655 running latest firmware
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues...
I am not using a custom ROM.
I hope this helps in some miniscule way.
Good luck.
Minus-1 said:
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
....
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues....
Click to expand...
Click to collapse
I was about to say the same thing...
Not having any issues with my girlfriends WPA secured router. It's on WPA2-PSK and AES encryption. Enter key first time (case sensitive!!), and of you go... Connecting without trouble ever since
hmm..Funny mine still can't connect to my home WPA2, AES or TKIP.. I'm on the Buffalo Tomato firmware..
WIFI not connecting
This solution worked for me!! Excellent. This was a right pain!
thedino said:
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
Click to expand...
Click to collapse
I've got the sollution, everybody on this forum probably has advance config installed, the program sets some default value's of it's own, set the WPA authentication under network in the advance config program to disabled and it will work again. Anyways, that worked for me
I've removed WiFi settings and then I edited settings again. It works now
Raphael Wifi problems
I bought this Fuze to replace my trusty Dash since I broke the antenna on my Dash. I'm running NRG Magic, but have tried other NATF and other ROMs as well, I cannot get this phone to connect to my wifi network I'm using WPA2-PSK but have disabled security for testing. My Dash and my laptop connect immediately with no problems. If I cannot get wifi going on this Fuze I'm afraid I'll have to put it on Ebay and try the Iphone, which people seem to love.
The Fuze did connect once, and it was WPA2-PSK at the time, I don't remember what ROM I was using at the time probably an NRG flavor, but Ihave had _no_ luck since.
Should I flash to 'official' ROM? Honestly I'm getting tired of playing with this thing I don't have the time.
Any help would be appreciated.
Thanks,
Marc
I may have found something
Check your time zone/daylight savings settings on your router. Phone and router time must be in sync.

[Q] Problems with Defy and 3.4.2 131-003 Orange Deblur

Hello,
yesterday i flashed my Defy with the 3.4.2 131-003 Orange Deblur Firmware, after this i wasn't able to connect from my computer to the phone over wifi.
Trough a proxy with SwiFTP theres no problem, but inside my own wifi nothing works, not even a ping.
Tried it again inside an other wifi network at work, same result, no connection possible, no ping, surfing and the market work fine.
//There are no problems connecting to an AdHoc network Comp<->Phone, pinging, connecting, FTP, everything works
///Now I've also tried it with 2 different OS (7 and XP), nothing.....
Anyone experienced these problems and/or could help me?

[Q] WiFi internet shared by notebook doesn't work

I've been looking around for a similar thread but I couldn't find anything helpful. My problem is that when I create a WiFi network with my notebook, and share my wired internet connection, I can connect to it, but there's no internet connection available.
My Inspire is using the newest MIUI build with the Radio that is recommended for the MIUI from the Radio thread. Every other WiFi network seems to work (I have some difficulties connecting to my uni's network but that's most probably not related to this, since my home network and every other network works fine). When I connect to this network, I have excellent signal, I get assigned proper network parameters by my own DHCP server and everything seems to work fine except for no internet connection, no pages load, market cannot connect etc. My friend's ZTE Blade works on this network, and my other friend's notebook also does. I tried pinging the device and from about 100 packets, only 1 reached it. I really have no idea what could be wrong. Thanks for the help in advice
Okay, after testing some more I can't connect to my uni's WPA2 secured networks, only the WEP secured networks. When trying to connect to a WPA2 network it says connecting, then the network quickly disappears and says Disabled or Remembered. Really pisses me off I tried also the "Released for Desire HD - 04-28-2011" Radio, no help with this, either.
andor44 said:
Okay, after testing some more I can't connect to my uni's WPA2 secured networks, only the WEP secured networks. When trying to connect to a WPA2 network it says connecting, then the network quickly disappears and says Disabled or Remembered. Really pisses me off I tried also the "Released for Desire HD - 04-28-2011" Radio, no help with this, either.
Click to expand...
Click to collapse
I would try a different rom. MIUI uses CM based drivers for WiFi and BT. I would check there.
Tried the official CM7.1 ROM, same result, and actually every other WiFi network works, so I don't think it has to do anything with the ROM.
andor44 said:
Tried the official CM7.1 ROM, same result, and actually every other WiFi network works, so I don't think it has to do anything with the ROM.
Click to expand...
Click to collapse
Try a non CM based Rom. They use the same drivers as MIUI is based off of CM. They use open source drivers instead of the ones built by the device manufacturer.
What type of connection does your university use?

[Q] How to connect to wifi 802.1x EAP ?

help me connect to eduroam pls
when i try to connect it says : "scanning ...."then "connecting ...." then "saved, secured with 802.1x"
Sensation XE
fw 3.25
rom : ARHD 6.2.1
ICS
same for me Sony
seems to be an android bug
-scanning-connecting-searching---- "disabled, secured with 802.1x eap"
this is my loop, and no connection at all
Same here :-(
iPhone users can connect fine to my company's 802.1x wifi network, but i can't from my android phones (SE Xperia X10 on Gingerbread & HTC Sensation on ICS)
A google search shows a lot of users having issue in connecting to 802.1x networks since Froyo (Android 2.2). There are worksrounds suggested, but they don't appear to work for me.
It seems the issue still exists in ICS as well :-(
Try LEAP WiFi free (it is in the market) or try to find one app for your comapny.
Leap WiFi works fine for me on IBM EAP APs.
Delete your old saved setting, before creating a new with Leap WiFi.
davebugyi said:
Try LEAP WiFi free (it is in the market) or try to find one app for your comapny.
Leap WiFi works fine for me on IBM EAP APs.
Delete your old saved setting, before creating a new with Leap WiFi.
Click to expand...
Click to collapse
will tests that
hope it will work
Huck33 said:
will tests that
hope it will work
Click to expand...
Click to collapse
Must be a bug in CM9, I'm having the same issue. Thinking about going back to CM7
bomczz said:
help me connect to eduroam pls
when i try to connect it says : "scanning ...."then "connecting ...." then "saved, secured with 802.1x"
Sensation XE
fw 3.25
rom : ARHD 6.2.1
ICS
Click to expand...
Click to collapse
Finally, I've defeated my CiSCO EAP-FAST corporate wifi network and now all our Android devices are able to connect to it.
The walkaround I've performed in order to gain access to this kind of networks from an Android device are easiest that you can imagine.
I'am a BES, MDM and Lotus Administrator, and btw and iOS lover.
Many of my colleages are Android users, and their claim is always the same.
Why iOS and BB users are able to connect to the corporate wireless network by chosing only WPA2 Enterprise and only needs the network SSID and their Active Directory Credentials?
2 years has passed since I heard this claim from my colleagues for the first time , and until yesterday, all of them remained disconnected even when they had ICS on their devices.
This things made me think about the Android and iOS system differences, and the way the OS developer thinks.
A wireless chipSet is a wireless chipset, and it not depends of the OS installed in a mobile device to have a better compatibility.( not like servers or routers ).
When you setup a Corporate wifi network on iPhone, basically you command the system to use some protocols to connect to, included in the WPA2 Enterprise cabinet. the system check all of the until find the right one to connect.
Android doesn't have the same protocols defined in his WPA2 Enterprise system definitions, so if you try to connect to it by using the main Android interface, you will have an authentication error.
There's a Wifi Config Editor in the Google Play Store you can use to "activate" the secondary CISCO Protocols when you are setting up a EAP wifi connection.
It's name is Wifi Config Advanced Editor.
Firstable you have to setup your wireless network manually as seemful as you can to your "official" corporate wifi parameters.
Save it.
Go to the WCE and edit the parameters of the network you have created in the previous step.
There are 3 or 4 series of settings you should activate in order to force the Android device to use them as a way to connect (the main site I think you want to visit is Enterprise Configuration, but don't forget to check all the parameters to change them if needed.
As a suggestion, even if you have a WPA2 EAP-FAST Cipher, try LEAP in your setup.
It worked for me as a charm.
When you finished to edit the config, go to the main Android wifi controller, and force to connect to this network.
DO NOT Edit the network again with the Android wifi interface.
Tested on Samsung Galaxy 1, 2 and Note mobile devices and on a Lenovo Thinkpad Tablet.
Gingerbread, Honeycomb and ICS.
May the force be with you, my young Padawan
Regards
Try the "Leap WIFI free" app from Play Store
Try the "Leap WIFI free" app from Play Store. Its an app provided by a developer called "OneGuyInABasement".
I was having the same issue where I couldn't connect to the (802.1x EAP based) Wifi network at my workplace.
I configured the network through this app and now I can connect just fine.
Leap WIFI free not working with JB 4.2.1
I have tried using Leap WIFI free on my Asus TF700T running the latest OTA update to JB (4.2.1).
While the tool seems to create a network profile, it does not even connect.
Trying to connect to a wifi network that shows up as Cisco EAP-FAST when I connect via my windows laptop
I've tried creating the profile using the built in wifi config editor as well, unfortunately it defaults to PEAP and while it connects and gets an IP address I do not have actual network access (e.g. web browsing fails).
The wifi ACE tool has not been updated to support JB yet either.
Any other suggestions?

[Q][NS4G][D720][CM9] Wifi connection issues

I am running the latest version of the ROM found here:
http://forum.xda-developers.com/showthread.php?t=1519138
I am having basic issues connecting at home; once connected I am fine but sometimes if I leave and come back I can't connect at all. Rebooting had no effect. It will just sit there and do nothing even if I try forcing it to connect or forgetting the network and resubmitting the needed information.
It is worth noting that while running stock 4.0.4 before I flashed the rom I had little to no troubles with wifi; it even handled EAP like a champ (I have yet to test it on EAP with this rom).
Any/all help is appreciated...thanks!
**EDIT** I believe the problem may have something to do with the fact that I am running the latest CM9 nightly on my HP Touchpad, as only one device seems to be able to connect at a time, although I know that they both can and have connected simultaneously. The device that doesn't connect seems to have issues obtaining an IP Address from the router.

Categories

Resources