So i am returning to stock with my htc flyer with the honeycomb leaks from paulobrien. The first step is to get the proper ruu with my cid: us_001, which is the x.xx.1540.xx brightstar ruus. so i download both of them, ive ran both of them, and they dont show up in C:/Users/%username%/appdata/local/temp it creates a new folder in it each time i run the ruu.exe file, but its blank when it finishes. also, the normal pop up that shows a picture of ur device on other people's computers doesnt show up on mine. i have seen .zip files of the ruu, but theyre on multiupload which has shut down. how do i get the ruu to run properly or can anyone make a mirror of one of these ruus somewhere ( i found it here: http://forum.xda-developers.com/showthread.php?t=1062184&page=17 )
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
I have a similar problem. Wanted to use the rom image to extract the stock recovery but can only find a new folder with data1.cab. No folder with the rom and no pop up.
Does the rom and pop up only get extracted/displayed if the phone is connected to the computer?
Related
im a noob so theres no way ill manage to flash a vox phone by just reading wiki so help me out here pls.
1.i understand that i need to cid unlock my phone. but first of all i have to connect the activesync. activesync comes in varity or can i just download one from any site, do i need drivers for the phone?.
2.then i need an ApplicationUnlock.exe-file from a folder. OK so i run the exe file from my computer or do i send to the phone trough activesync and then run from there. do i have to put the folder with the exe file in the phone och the file is just enough. where in the phone should i put the folder or file.
3. what will the screen show so i know im doing the right thing here.
4. after that i should have a VOX_USPL folder with a spl_116_jockyw.bat file that i need to execute. so what do i do with this folder where do i put it, i mean should i execute it from my computer or phone?
5.so if i make to this point i should ok right? btw any reboots along the way i should be aware of? am i forgetting something more steps maybe?
6.so then i need a cooked rom right? like a folder with a bunch o files right? one of this files should be a flash.exe-file. so do i execute it from the folder in my computer while the phone is conected via activesync or do i put folder in somewhere in the phone and execute it from there. what do i do with the other files in the folder?
all this questions makes me confused about if i should or not. i just want to update the phone to 6.1 or higher, is there any official rom update that will go smoother?
The sequence of actions is a little different than you stated.
You need to application unlock the device as it is to allow subsequent actions to succeed.
You must temporarily (or permanently aka "Hard-SPL") put a bootloader on the device that ignores the CID lock. The device is NOT CID unlocked afterwards, but the "ignorant" SPL allows you to flash a cooked ROM nevertheless
Once the above is understood, reading the WIKI should give you the rest of procedures.
hi thanks so much for clearing that out, i think i kind of understand the purpose.
but as you see the wiki left me with so many specific questions regarding to all the necessery steps. if anyone can make or point me to a guide for dummies like me without skipping things that leaves me with questions like the above i would be most greatfull
Hello look for a link works for PG88IMG_based_on_RUU_Saga_HTC_Europe_1.28.401.1.zi p
Anyone can help me.
i find this but link not work
loveboatcaptain said:
and here it is...
based on the RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release
downloadlink: PG88IMG_based_on_RUU_Saga_HTC_Europe_1.28.401.1.zip
just rename it to "RG88IMG.zip" and put it on the root of your sd card.
then reboot into fastboot mode (bootloader) and the rest will be done automaticly.
you can extract that zip file to modify the system image to get root e.g.
search the forums to get it out how.
kind regards
Click to expand...
Click to collapse
Maybe try this. Not sure if it'll work
http://forum.xda-developers.com/showthread.php?t=1488672
Just scroll down a bit
Edit: forget to mention, maybe your zip-file already contains the pg88.. Thing you need
Sent from my Desire S using XDA App
Thanks for the reply but that's only radio and I need ROM a full install from sdcard And also does not need to do s-off
OP says you need pg88img.
That's not a ROM
Which ROM do you need? didn't searching the forum solve you're problem?
You have to state clearly what you want or need
Edit: Maybe that's what you need
http://forum.xda-developers.com/showthread.php?t=1002506
Sent from my Desire S using XDA App
Whatever may be the reason that you need this (?) here is how to get it yourself:
Download RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release from the sticky Stock ROMs thread.
Run the RUU on your PC.
On the first screen (do not press anything when it starts) open your Windows Explorer, browse to the C: drive and in the search field type rom.zip.
Wait for the search to complete and copy the rom.zip file to another loacation.
Close the RUU setup.
Rename the rom.zip (this is exactly what are you looking for) to PG88IMG.zip and copy to SDCard.
Yeah you are thinking about the rom.zip of the RUU which is renamed to that. So follow what amidabuddha said!
Thank you very much this is exactly what i look for.
thanks for all
hello guys..
need your help
need a stock rom for my
to work with the
sensation xe. xe.Z715e
hboot 1.27.0000
ICS 4.0.3 v3.6
software 3.32.401.105
any body out there got a clean back up
some where i messed up...
i do not have s-off
i unlocked bootloader with http://www.htcdev.com/
i have recovery-clockwork-5.0.2.0-pyramid installed on it..
i found this one here ::Sensation_3.32.401.105_odexed
but that is not working...
You have to change firmware first.
ICS roms use different firmwares. Find it in any rom topic here....
where to find them
woowwww i am lost...
please guide mi to the right direction..
my phone does boot now..
but just get a black screen
with a lot off msj saying things are not working...
Nope.
Read this and read it slowly.
http://forum.xda-developers.com/showthread.php?t=1472298
butt i have s-on
just want to go back to originale
there is also a link how to s-off
just read it
yes
but that is not working with
hboot 1.27.0000
Can you still boot into bootloader? If so, you can try this:
Download an RUU
1. You now need to pick the RUU you wish to flash, a good source is this thread:
http://forum.xda-developers.com/show....php?t=1074559
2. Once you have downloaded the RUU you would like to flash, run it (it can take a while to load), and stop when you get the welcome screen, which has a picture of a Sensation on the left and a red caution notice on the right.
3. Move this window out of the way (it forces itself into foreground), then open up windows explorer and go to:
C:\Users\[username]\AppData\Local\Temp
4. Then sort by Date Modified. Find the newest folder with a long random sequence of numbers as its name, go in here and you should see, three files and a folder: corecomp, dotnetinstaller, IBSEW64. (the files may be different on 32-bit OS), now go into the folder which has another long random name.
In there amongst a lot of files (use search if you need to), you will find rom.zip. This is the rom we want to flash!
5. Copy the rom.zip file to the root of your SD Card
(i.e. if your on Windows, X:/ [where X is the letter of your Sensation's SD Card])
6. Rename the rom.zip you just put on your SD Card, to PG58IMG.zip (ensure you do not rename it to PG58IMG.zip.zip or it wont work!)
7. Find the "HTC Android ROM Update Utility" Window, and hit Cancel.
from my HTC Sensation using XDA
Hey everyone,
I have been looking all over for the files needed to make my TF700 brick proof. I basically need the ebtblob.bin file for my device so I can flash it via fastboot. The main site that says to get it from their download section does not appear to actually have it (http://androidroot.mobi/download/). Does anyone have the files they can send me? Just to be clear I am not asking for anyone elses device specific backups, rather the file I need to flash via fastboot to create them in the first place.
Thanks!
http://androidroot.mobi/t3_nvflash/ - scroll down to the downloads section.
Thread Closed at OP's request.
I read "All the Internet" and there is no other place explaining in english except here for this particular phone so I think one more point of view is not hurting anyone.
You may want first to see the link of stefano2626 then go back. He assumes you have no trouble with the drivers. I posted 2 links with drivers below so you wont need to search it along with the original Firmware & uptate from Prestigio site in case you need it in future but all the files you need for now are in the stefano2626's link which posted below .
http://forum.xda-developers.com/showthread.php?t=2541009
I downloaded the first link and uncompressed it in "system_recovery" folder on Desktop like stefano2626 said on the link.
After installing all the drivers (because i wasnt sure if/which will work) i wrote 'adb devices' to see if it reads my phone and then typed "adb reboot bootloader" The phone restarted but instead in recovery it "stuck" on boot image - thats WHAT YOU WANT -then hit the "install-system-windows.bat' from the uncompressed folder from the link of stefano2626 (which posted below). The display will flash in white for 1-2 sec then go dark,dont worry wait and dont touch anything. The phone will start showing you what its doing and after its finished will start normally. Then update it from settings/about phone/system updates trough internet because it will be the older version (firmware). Thats it.
optional: To be easier type CMD in search go to directory and copy it ,not the shortcut but the file "cmd.exe", then paste it in the uncompressed folder from the link and start it from there. That way it will start from the folder & you wont type as much.
I applied these links I found in my "quest" - download them in a folder somewhere in your harddrive in case you need them in the future. Restart Windows if doesn't recognize the drivers. You can uninstall them, restart & install the drivers again. After restart & before install you may wanna clean your registry.
Im not sure if it is relevant or not thats why I should mention it. I pasted update.zip from the original prestigio Firmware v1.0.16 in the uncomressed "system_recovery" folder and then I hit "install-system-windows.bat'
p.s. I would like to see more content for this phone. Its not so popular but in Europe and Russia there is a significant part Prestigio owners.
http://www.4shared.com/archive/f7ss3Bg6ba/system_recovery.html
http://androidxda.com/download-prestigio-usb-drivers
http://singledrivers.blogspot.com/2013/12/prestigio-multiphone-5300-usb-driver.html
optional:
http://www.prestigio.com/catalogue/..._5307_DUO#/product-support?article=PAP5300DUO
http://www.prestigio.com/news/firmware_updates/MultiPhone_5300_DUO_v1_0_25_eng