Related
so i went into recovery mode and tried to recover and all i got was a phone that wont even load its stuck on the galaxy s logo and wont do anything else is there anything i can do or is this pointless please help me out i am in serious need of advice
Did you get this after the 1 click?
Sent from my SAMSUNG-SGH-I897 using XDA App
xavier4992 said:
so i went into recovery mode and tried to recover and all i got was a phone that wont even load its stuck on the galaxy s logo and wont do anything else is there anything i can do or is this pointless please help me out i am in serious need of advice
Click to expand...
Click to collapse
can you get into download mode?
Pull battery, replace battery, load up odin one click, plug in usb WITHOUT phone, hold volume up+down, plug in usb.
http://forum.xda-developers.com/showthread.php?t=731989&highlight=Odin
build a jig man, thats all you can do at this point. (if the post above mine doesnt work)
check out my sig, theres a link to the thread, but its on my post where i show how i made my jig.
this worked thanks alot
alex4lex said:
Pull battery, replace battery, load up odin one click, plug in usb WITHOUT phone, hold volume up+down, plug in usb.
http://forum.xda-developers.com/showthread.php?t=731989&highlight=Odin
Click to expand...
Click to collapse
this worked thanks alot
ok i was using gtg unbrick odin and my usb got acidently disconected,try to run the odin program again but it does not do nothing, now my phone wont turn on
Can someone please help
Did you try to go into download mode ?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
How do you get into download mode
re: download mode
ssfirme said:
How do you get into download mode
Click to expand...
Click to collapse
easy to get into download mode, try this:
Unplug usb cable.
Press vol up+vol down at the same time and hold it for a few seconds then when you let go you should see a large triangle which says "do not turn off the fone".. when you see that, have Odin ready with all the flash files setup properly and simply plug the usb into fone from computer.
When you have done that, the [COM: ] entry in Odin will turn Yellow and it will have a number in it. After it does that click start in Odin.
Do not check or uncheck any of the boxes in Odin, let it stay at default.
Be sure to follow instructions in XDA forum where you got the Ultimate Unbrick........
Good luck!
To get into download mode you only need to hold the volume buttons down as you plug in the USB
Sent from my SAMSUNG-SGH-I997R using XDA Premium App
re: download mode
P1 Wookie said:
To get into download mode you only need to hold the volume buttons down as you plug in the USB
Sent from my SAMSUNG-SGH-I997R using XDA Premium App
Click to expand...
Click to collapse
You made me edit my post! (your right)
What they said. Sorry I fell asleep.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Sorry but that dint work,i really dont feel like going to at&t since i dont have warranty or insurance on my phone
ssfirme said:
Sorry but that dint work,i really dont feel like going to at&t since i dont have warranty or insurance on my phone
Click to expand...
Click to collapse
His instructions for download mode were correct, but I think you have to pull the battery first... Pull battery, hold volume buttons, put battery back, while holding buttons plug micro usb in phone (usb to pc should already be connected)
message from Sams inFuse... GINGERBREAD *****ES!!!!
byuboy87 said:
His instructions for download mode were correct, but I think you have to pull the battery first... Pull battery, hold volume buttons, put battery back, while holding buttons plug micro usb in phone (usb to pc should already be connected)
message from Sams inFuse... GINGERBREAD *****ES!!!!
Click to expand...
Click to collapse
That's how I do it. Id have Odin already running on pc, take bricked phone and pull battery, hold down both volume buttons, while holding volumes plug phone via usb to computer, the phone should display the triangle screen telling you now to turn off phone or whatever.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
If you bought it within the last month, you can return it for a new one easily, no questions asked.
Sent from my SAMSUNG-SGH-I997 using XDA App
Unkrash said:
If you bought it within the last month, you can return it for a new one easily, no questions asked.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
True but id think he'd know that which is why I think he picked it up used.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Don't need to pull battery if the device is fully off.
If it's bootlooping or something, you'll need to pull battery to stop the bootloop then plug in the USB when holding VolUp and VolDown.
If you get the yellow "working android" screen you're good, if you get the "phone and PC exclamation mark" screen you're still good - the latter just means you HAVE to flash something to get a working phone.
gtg's unbrick package did not have bootloaders so it should not be able to hardbrick your phone. You're hardbricked only if you get a black screen no matter what you do.
PM sent. I would like to offer you a free opportunity to allow me to BETA test and attempt a JTAG repair on your phone and produce a world's first and also allow you to have a repair for free. Let me know! We could make history...
Use a Jig and flash with Odin
Look at this link: android.jakaar.net/infuse-jig.html for information how to make a jig.
Then go here: android.jakaar.net/infuse-return-to-stock.html to flash it back to stock.
Hopefully it would help someone else who more recently bricked their Infuse
ssfirme said:
ok i was using gtg unbrick odin and my usb got acidently disconected,try to run the odin program again but it does not do nothing, now my phone wont turn on
Can someone please help
Click to expand...
Click to collapse
Same thing happened to me two days ago. I was going back to stock and the usb cord came out (was house sitting a neighbor's frisky dog). It was me, not the dog. I really thought that I was screwed this time. I only had a few dots in a diagonal pattern and that was it. I did the vol+,vol-, and usb and saw that odin recognized my infuse with nothing on the screen but a few dots in a diagonal pattern. Went through the motions and bingo. It was fixed. GTG to the rescue again!
fishjam said:
Same thing happened to me two days ago. I was going back to stock and the usb cord came out (was house sitting a neighbor's frisky dog). It was me, not the dog. I really thought that I was screwed this time. I only had a few dots in a diagonal pattern and that was it. I did the vol+,vol-, and usb and saw that odin recognized my infuse with nothing on the screen but a few dots in a diagonal pattern. Went through the motions and bingo. It was fixed. GTG to the rescue again!
Click to expand...
Click to collapse
I've had this happen to me (yanked the cable accidentally) and had the dotted colors/black screen. See if your PC will recognize your phone. The way to tell is if COM##4 or whatever comes up in the far left box in Odin, the box will be yellow. If it does just run odin like your phone is showing the download screen.
Jakar217 said:
Look at this link: android.jakaar.net/infuse-jig.html for information how to make a jig.
Then go here: android.jakaar.net/infuse-return-to-stock.html to flash it back to stock.
Hopefully it would help someone else who more recently bricked their Infuse
Click to expand...
Click to collapse
Thank you very much. This helped me out when I had no hope left. Now I'm stuck at the CWD blue screen.
I flashed a wrong kernel by mistake... and now my phone just comes up for a sec or so.. shows samsung logo and goes black... i can see the internal and external sd card drives under my computer but cant access them ofcourse. Am i hard bricked? How do i go into DL mode from here?
I had the same situation, thought I hard bricked my phone as well. That little pic of a phone triangle and a small mini computer is really nothing to be alarmed about, its still considered to be a download mode. If you have GTG's Unbrick files Use them in Odin to unbrick your phone and continue as normal.
---------- Post added at 01:41 PM ---------- Previous post was at 01:38 PM ----------
sasa111 said:
I flashed a wrong kernel by mistake... and now my phone just comes up for a sec or so.. shows samsung logo and goes black... i can see the internal and external sd card drives under my computer but cant access them ofcourse. Am i hard bricked? How do i go into DL mode from here?
Click to expand...
Click to collapse
USE GTG's Unbrick go back to stock and do it again.
I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
I believe this is in the wrong forum but I understand your panic. Don't take my word for this but I believe you need a USB jig to get out of this. Or unless try this:
1. Pull battery for 15-20 seconds
2. Re insert battery
3. Hold volume up/volume down while plugging in USB cord from computer
4. If it succeeds you should be in download mode!
P.s. Sorry if you have already done this, i'm just attempting to help you troubleshoot
Sent from my SGH-I997 using xda premium
I believe this is what you're seeing..
http://img196.imageshack.us/img196/3323/20101211170056.jpg
Sent from my SGH-I997 using xda premium
Like rominator was saying pull battery hold volume buttons replace battery insert USB cord will turn on in download
Sent from my SAMSUNG-SGH-I997 using XDA App
theROMinator said:
I believe this is what you're seeing..
http://img196.imageshack.us/img196/3323/20101211170056.jpg
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
phoneman108 said:
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
Click to expand...
Click to collapse
Uhh, I haven't gotten stuck on that on my Infuse I don't think, but with the Captivate the solution was to hold vol + and - and power at that screen until it rebooted, then let go of power and it would fall back to download mode.
And yes, this is not development and should be in the general section.
phoneman108 said:
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
Click to expand...
Click to collapse
EDIT: Did you hold BOTH volume up and down as you plugged in the usb?
USB Jig
http://www.amazon.com/gp/offer-listing/B0053H73JQ/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all
It's been reported here in the forums that IT DOES work. You might want to search around to confirm that. Or, if you want quick help you can possibly explain more of what you did to get your phone to this point.
Jig Does work!!!
i made at the job not to long ago....took me a while to get the right resistance, but it got it into download mode.
theROMinator said:
EDIT: Did you hold BOTH volume up and down as you plugged in the usb?
USB Jig
http://www.amazon.com/gp/offer-listing/B0053H73JQ/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all
It's been reported here in the forums that IT DOES work. You might want to search around to confirm that. Or, if you want quick help you can possibly explain more of what you did to get your phone to this point.
Click to expand...
Click to collapse
Yes, I meant to write Holding BOTH Vol+ and - and USB insert.
Here are the steps that I got me here... one step is completely stupid....
1. Yesterday, I was trying to get 3e recovery, so got the zip file
2. MISSED this step - of Copying the recovery file to SD Card.
3. Renamed the old recovery in the bin folder to _old
4. Rebooted and then used the ROM Manager to reboot into Recovery.... Bad idea - The phone went blank....
5. Only solution I saw was to ODIN in the GTG's Ultimate unbrick.....
6. Went into Download Mode....
7. ODIN sees the COM Port.
8. Loaded the .pit and other files per instructions....
9. Pressed START
10. ODIN reports failed.
11. Unhooked the USB and HARD rebooted.... Arrived at this icon.
Yes, i am a noob and am paying for my mistake of overlooking a step.
You could possibly try heimdall... do you have kies installed (only needed for drivers)? Hmm, I couldn't help you any further w/o actually being there
Definitely keep me posted!
I have bricked my phone a few times now . Same error screen and everything, just do the vol + and vol - down trick , let it boot to the error screen and startup odin 1.8 or higher. That part is very important. Odin 1.8 will recognize it as a serial device and write the software . Good luck!
I've been in that icon, but I just tried back with Odin gtg's unbrick and it went through perfectly as always. I got there because I forgot to select the pit file and Odin started to download and it failed.
I think that symbol is the same download mode but in this case you must use Odin because the phone can't startup itself. Just don't panic if it worked for me then it would work for you.
Sent from my SGH-I997 using XDA Premium App
Nopcodex90 said:
I have bricked my phone a few times now . Same error screen and everything, just do the vol + and vol - down trick , let it boot to the error screen and startup odin 1.8 or higher. That part is very important. Odin 1.8 will recognize it as a serial device and write the software . Good luck!
Click to expand...
Click to collapse
weird because I have used odin 1.7 with success each time..
Oh yeah, that error screen is a download mode isn't it? I forgot about that. So just use unbrick from there or flash something else you want.
AJerman said:
Oh yeah, that error screen is a download mode isn't it? I forgot about that. So just use unbrick from there or flash something else you want.
Click to expand...
Click to collapse
Yeah, that error screen is download mode, just like the usual "Construction Android" screen, with one difference:
The phone is forcing download mode because it knows it's hosed up. It's saying "flash something with Odin or you're not going anywhere".
So you're already in download mode - no need for button combos, the phone realized you needed it and went straight there for you.
BTW this doesn't belong in Development.
re: its not bricked!!!
phoneman108 said:
I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
Click to expand...
Click to collapse
Its not bricked!!!
Those symbols only mean that it did not finish the last operation/flashing
Its the same as download mode.
So go back into those "Cell Phone ........Exclamation Mark (in orange).......... Computer"
Which is download mode and start a new flash of the Ultimate Unbrick.
Good luck, be sure to to put PIT to PIT PDA to PDA and PHONE to PHONE
in odin!!!
GOOD NEWS.
That was simple... Followed the suggestions from Nopcodex90 , Mrjunky and all....
Just started ODIN, loaded the PIT, PDA and PHONE files and off it went and am back alive........
You all are so helpful... Thank you all..... I learnt valuable lessons today.....
Now, if I may request the Admin to please move this post to the correct forum ......
phoneman108 said:
I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
Click to expand...
Click to collapse
That icon is a form of download. You can still connect to odin amd use ultimate unbrick
looks like i some beat me to it. Glad to see your back
Sent from my SAMSUNG-SGH-I997 using xda premium
That happened to me other day I just plugged it in Odin like that and it recognized it and did gtg unbrick back to stock, try to restart Odin and try plugging it in like that and see if Odin recognizes it, it recognized mine
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Take out the battery, put battery back in, hold both volume buttons, continue holding and plug in usb. You should be in download mode, now retry odin with GTG ultimate unbrick.
This phone is never really bricked, ive flashed a wrong bootloader using heimdall and nothing would turn on and i was still able to odin back to stock.
i was flashing stock 2.2 back on my captivate and it rebooted. nothing happened after that. i cant turn on my phone and i tried getting into download mode. What should i do? Am i hard bricked?
the three button combo doesn't work? to get back into download mode.
One method that worked for was:
1. take the battery out
2. Take sim card and sd card out (just in case...)
3. Hold the two volume buttons
4. Insert the usb cable and keep holding the volume buttons.
5. When the phone detects the signals in the cable it should go into download mode
Good luck
Sent from my SAMSUNG-SGH-I897 using XDA App
no luck. :C can the unbrickable mod be applied to my phone?
Hold the Volume up, down, and Power Button, try going into recovery mode.
Still no response.
Gengar6 said:
Still no response.
Click to expand...
Click to collapse
Download One-Click UnBrick that should work.
http://forum.xda-developers.com/showthread.php?t=1153310
Somewhere on xda one of the devs created and posted a very compact software solution this problem.
For the life of your caotivate I cannot locate it right now... but I know there is a solution to this problem.
Try searching on google as well as xda ( I usually search on google with "site:xda-developers.com" after to search only this site ) for "captivate soft unbrick" or something similar. When I'm on a comp I will try to find the thread and post on here. But in the mean time... step away from it and take a deep breath.. it may get more frustrating before you see that boot animation again.
Good Luck
And remember, the only way to brick the captivate is to use a hammer ;-)
Sent from my SAMSUNG-SGH-I897 using XDA App
Yeah... Forget my posts read Allens. He got it done!
Sent from my SAMSUNG-SGH-I897 using XDA App
the one click didnt work. my phone has a black screen and wont go into download/recovery. :'C
Alright then follow these instructions.
What you need:
Odin: http://forum.xda-developers.com/showthread.php?t=731989
USB Cabel
Steps:
Remove battery, SIM card and micro SD card.
Open Odin on the computer.
Put the battery back in.
Plug in the USB cable to the phone.
Hold both volume up and down.
With VOL up/down held in, plug usb cable to the computer.
Your phone will show the DOWNLOADING yellow image.
Recommended: I recommend you to save all your files when you plug in your USB to your Computer so when you have any issues you can restore it back.
Allen, i already tried that and no results.
Gengar6 said:
no luck. :C can the unbrickable mod be applied to my phone?
Click to expand...
Click to collapse
yes... this!!
all this other crap is just spinning your wheels if you get absolutely nothing out of it.
Thread closed
Questions belong in Q&A.
I was in chat when the cell was shut down suddenly and would not start, remove the battery and insert her again, was there when the phone lit immediately insert the battery but still in a cycle..
the phone on and off, on and off, and so on..
I need help :S
Is there any way to fix it?
PD: Sorry for my bad english.
Sent from my LT15i using Tapatalk 2
My infuse does this too, i cant even get recovery mode or download mode. Even tryed taking apart my phone and cleaned the power button and its still effed up. Anyone got a fix to this?
Sent from my Galaxy Nexus using xda app-developers app
Dhlan said:
I was in chat when the cell was shut down suddenly and would not start, remove the battery and insert her again, was there when the phone lit immediately insert the battery but still in a cycle..
the phone on and off, on and off, and so on..
I need help :S
Is there any way to fix it?
PD: Sorry for my bad english.
Sent from my LT15i using Tapatalk 2
Click to expand...
Click to collapse
When you say on, off, on, off. Do you mean the lights flash then it goes off or does it try to boot?
Can you get into download mode?
Have you tried a different battery or left the battery out for an hour or so, then tried again?
Truckerglenn said:
When you say on, off, on, off. Do you mean the lights flash then it goes off or does it try to boot?
Can you get into download mode?
Have you tried a different battery or left the battery out for an hour or so, then tried again?
Click to expand...
Click to collapse
it does try to boot but then nothing happen..
i've never get into download mode :S how i do that?
Yes, i tried different battery and it does the same with both.
any solution? could be some files from the software are missing? repair software? u.u
First you need to download Heimdall or Odin from the ISET page to you PC. I believe Odin uses the Kies drivers and Heimdall replaces the with a Samsung composite driver. I personally use the Heimdall back to stock that is rooted.
Once you have them and decide which one you will use, you will need to get into download mode. Take the battery out, connect USB to phone and preferably a rear USB port on your PC. Hold volume up and down, No Power button though, and then insert the battery. This should put you in download mode and you need to push volume up to get to it. Volume down cancels it and will reboot. You may want to just try that one time to see if it corrects the problem. If not, repeat steps to get to download and flash either Odin to Heimdall and then start flashing again.
Read the instructions on the OP of Odin or Heimdall and ask questions if you aren't sure of what to do.
Sent from my SGH-i997 using xda premium
psal217050 said:
First you need to download Heimdall or Odin from the ISET page to you PC. I believe Odin uses the Kies drivers and Heimdall replaces the with a Samsung composite driver. I personally use the Heimdall back to stock that is rooted.
Once you have them and decide which one you will use, you will need to get into download mode. Take the battery out, connect USB to phone and preferably a rear USB port on your PC. Hold volume up and down, No Power button though, and then insert the battery. This should put you in download mode and you need to push volume up to get to it. Volume down cancels it and will reboot. You may want to just try that one time to see if it corrects the problem. If not, repeat steps to get to download and flash either Odin to Heimdall and then start flashing again.
Read the instructions on the OP of Odin or Heimdall and ask questions if you aren't sure of what to do.
Sent from my SGH-i997 using xda premium
Click to expand...
Click to collapse
I did what you said multiple times but evertime i do it it just goes straight to the charging screen then reboots and keeps doing the samething?
It seems your power button is faulty. You might need to open it up and clean the contacts or get it repaired.
Sent from my sweet & buttery Infuse
andros11 said:
It seems your power button is faulty. You might need to open it up and clean the contacts or get it repaired.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
yeah i just opened it up afew min. ago.. still same problem.. looks like i need to repair the power button.. thanks
playing with soder
crookx said:
yeah i just opened it up afew min. ago.. still same problem.. looks like i need to repair the power button.. thanks
Click to expand...
Click to collapse
i opened it up and put my soder to it and it stoped boot looping but i think i did a bad job cuz the power button is not functioning is there a way to turn on without the power button
texmextech said:
i opened it up and put my soder to it and it stoped boot looping but i think i did a bad job cuz the power button is not functioning is there a way to turn on without the power button
Click to expand...
Click to collapse
install ADB for windows and type the command
adb devices
(if your device's S/N is listed then type)
adb reboot