Getting adb not recognized as internal or external command, drivers installed, debugging is on! any help greatly appreciated!
Try uninstalling and reinstalling drivers?
chubas said:
Try uninstalling and reinstalling drivers?
Click to expand...
Click to collapse
Thx! But no go! grrrrrr lol
Make sure that the Check of "Usb as storage only" under storage settings is disabled. Then try rebooting your pc and phone, that works for my.
That message just means hes using adb commands under a folder where adb isnt at.
Sent from my LG Thrill 4G...
Trekfan422991 said:
That message just means hes using adb commands under a folder where adb isnt at.
Sent from my LG Thrill 4G...
Click to expand...
Click to collapse
Kind of new at this, can you tell me how to modify to make it work?
ty in advance!
That was correct, extracted file to different folder and started root, now stuck on searching for device! drivers??
do not connect usb with phone while installing driver.
All good! fyi to all, need older version of rom amanger or you will be stuck!
Related
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
droidmark said:
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
Click to expand...
Click to collapse
Hi - Would really appreciate your help here. Thanks for the tip on turning debugging off to get to the phone so I could install the USB drivers. Problem now is that ADB just refuses to connect to it. It shows up asa disk drive in Devices, but when I do a kill-server then start-server then adb devices, it doesn't list any devices, and an adb shell just says device not found.
Do I need to reboot Windows, or the phone? Seems unlikely. I can open a window to the phone, but can't get access to install the Gingerbreak and su files I need to root it. Going crazy!
Thanks,
Eric
Try rebooting both. Couldn't hurt.
Oh yeah, and if you haven't make sure the phone is back in debug mode.
Sent from my SCH-I510 using XDA App
Black-Falcon said:
Try rebooting both. Couldn't hurt.
Oh yeah, and if you haven't make sure the phone is back in debug mode.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Well, I'll be a monkey's brother in law. I rebooted both, checked debig mode - and it wasn't on, to my surprise. I've turned it on and off a bunch of times, so...
Anyway, I was able to finally get adb working!!! Yaaaayyy! But now I'm trying to root it, and Superuser doesn't show as an app, and Root Explorer says the f-er isn't rooted. And the Gingersnap Root Utility I've been trying to use, says it's all good to go, but its not.
Gonna try a different method, but if anyone has any ideas, I'm open.
Thanks!!!!
Use gingerbreak.
You gotta download superuser from the market
Sent from my SCH-I510 using XDA App
ClarkSt said:
Well, I'll be a monkey's brother in law. I rebooted both, checked debig mode - and it wasn't on, to my surprise. I've turned it on and off a bunch of times, so...
Anyway, I was able to finally get adb working!!! Yaaaayyy! But now I'm trying to root it, and Superuser doesn't show as an app, and Root Explorer says the f-er isn't rooted. And the Gingersnap Root Utility I've been trying to use, says it's all good to go, but its not.
Gonna try a different method, but if anyone has any ideas, I'm open.
Thanks!!!!
Click to expand...
Click to collapse
Try downloading busybox from the market, or downloading titanium backup and hit the "problems" button when you open it and select get busy box
Black-Falcon said:
Use gingerbreak.
You gotta download superuser from the market
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Tried GingerBreak. No good. "permission denied".
Good idea - I got Busybox installed this way, but still no joy from Gingerbreak.
Just flash the ED1 odin package and done
Sent from my SCH-I510 using XDA App
DroidXcon said:
Just flash the ED1 odin package and done
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
If I could flash anything I'd be rooted already, wouldn't I? How do I flash? ROM Manager needs root. Vicious circle.
I've heard that its not possible to root the Charge using current methods since the f-ing update the other day.
ClarkSt said:
If I could flash anything I'd be rooted already, wouldn't I? How do I flash? ROM Manager needs root. Vicious circle.
I've heard that its not possible to root the Charge using current methods since the f-ing update the other day.
Click to expand...
Click to collapse
Check the development thread for the Charge. There's a thread on how to rollback to ED1 with root using Odin.
Edit: Direct link: http://forum.xda-developers.com/showthread.php?t=1085190
droidmark said:
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
Click to expand...
Click to collapse
Dude - THANK YOU!!!! I could not get those drivers to install!!!
Please - Stickie!!!
If you want the drivers and don't trust the sources posted anywhere (we're not trustworth ?) you can get them from the phone itself. They are located in the file /system/etc/autorun.iso and you can extract them from it.
How to flash recovery.img via standalone adb?
and how to fix error in adb : `error: device not found`?
Windows 7 x64 , Motorola xoom 3g (Verizon)
Follow this thread for flashing recovery via ADB.
but what to do with error??
nothing changes
TechnoManiac97 said:
but what to do with error??
nothing changes
Click to expand...
Click to collapse
That error indicates that either you are missing the proper drivers from the Motodev site or usb debugging has been unchecked on your Xoom in settings. There may be other reasons but those seem to be most common.
emm..
Ive got everything
I forgot to write on the picture that usb debugging is on
so now you can see the picture how it looks like
using this drivers http://www.motorola.com/Support/US-EN/Support-Homepage/Software_and_Drivers/USB-and-PC-Charging-Drivers
in aplications|development I`ve got:
USB Debugging on
Stay Awake Off
Allow mock locations on
first off read....... and then follow the steps here
http://forum.xda-developers.com/showthread.php?t=1209341
and try to keep all your questions in one thread = makes your (and our)life easier and keeps unnecessary thread clutter down
Have you restarted your computer after you installed the Moto Drivers?? Sounds stupid, but I've had weird things like that happen before with HTC drivers... Worth a shot.
Dear cqms13,I don't understand where I have to find answer to my question(In that link)
That link doesn't make any sense(to my problem)
Maybe you can copy-paste Smth interesting and usefull?
Yes,Ive reboted my PC before I tryed to do Smth with adb
Sent from my Xoom using XDA App
I found that when my device is on I can do everythinf in adb, but when it is in fastboot I`ve got that error
i need help with rooting the pantech burst 4.0.4 i found a website but i lost the link soooo can anyone help me
mustafa.ali61 said:
i need help with rooting the pantech burst 4.0.4 i found a website but i lost the link soooo can anyone help me
Click to expand...
Click to collapse
found the website: http://pantechburst.blogspot.com/2012/10/rootrecovery-pantech-burstprestop9070.html
i cannot connect adb device
Have you turned on USB debugging in settings?
Yeah usb debugging is on but the computer doesnt recognize it as a adb device
Make sure you have the right drivers installed on your computer. Try removing and re-adding them. Also, try a different USB cable.
i connect adb device,but i stuck at
fastboot boot cwm-5.0.2.7-presto.img
and after i press enter i get
cannot load 'cwm-5.0.2.7-presto.img
someone help pleaseeeee!!!!!! :crying:
Did you put the cwm-5.0.2.7-presto.img file on the SD card? Also, if you're sure that's the correct CWM for your device, you can use Android Flash Recovery to flash it.
OK I'll try that yhanks
Sent from my PantechP9070 using xda app-developers app
Not Working
I have no clue what I'm doing because I have never had to use ad before. Everything I have read about rooting the pantech burst says I have to use it. I have downloaded the files and I click "run" then all the other stuff I have to, open the command promt and type in "dir" and it shows it in the directory but when I try to put all the stuff It says that it "is not recognized as an internal or external command, operable program or batch file" I downloaded the 64 bit version of adb and I'm running windows 7 that's 64 bit, can anyone help me?
I have a new Pantech Element on the latest ROM. I spent all day trying to root - the latest one-click seemed to work, but when it rebooted it failed.
I was able to finally succeed with this one here:
http://forum.xda-developers.com/showpost.php?p=31963526&postcount=532
Download the latest adb_restore_rooting and with developer mode enabled run "post.bat". Worked for me and SuperSU actually stuck through reboot for once.
Hi,
I am using htc sensation with vipers 3.1.2 rom with sabestian fm kernel. while playing with my phone, i've found out that my phone is offline. even though the usb debugging is enabled, my computer is not reading my device. i've installed the htc driver many times but it doesnt work. since my computer doesnt recognize my device, the adb is showing the device as offline. Plz help
huzefaonline said:
Hi,
I am using htc sensation with vipers 3.1.2 rom with sabestian fm kernel. while playing with my phone, i've found out that my phone is offline. even though the usb debugging is enabled, my computer is not reading my device. i've installed the htc driver many times but it doesnt work. since my computer doesnt recognize my device, the adb is showing the device as offline. Plz help
Click to expand...
Click to collapse
You need to get newer adb files. Since android 4.1 you need newer ADB files. Just download the sdk and extract the updated files. Also possible (if you have the SDK) is to open the SDK manager and download updated platform-tools.
astar26 said:
You need to get newer adb files. Since android 4.1 you need newer ADB files. Just download the sdk and extract the updated files. Also possible (if you have the SDK) is to open the SDK manager and download updated platform-tools.
Click to expand...
Click to collapse
ok. i am done with that. whats next? plz guide. need to get computer detect my phone as well. unable to install drivers.
huzefaonline said:
ok. i am done with that. whats next? plz guide. need to get computer detect my phone as well. unable to install drivers.
Click to expand...
Click to collapse
connect the device to pc
open a command prompt and do
adb devices
see if it detects it now
also install htc sync.it might help
rzr86 said:
connect the device to pc
open a command prompt and do
adb devices
see if it detects it now
also install htc sync.it might help
Click to expand...
Click to collapse
Yaay its working now thank you so much
huzefaonline said:
Yaay its working now thank you so much
Click to expand...
Click to collapse
so it was all about htc sync?
rzr86 said:
so it was all about htc sync?
Click to expand...
Click to collapse
Nops. i am downloading htc sync at the moment. i had the old file of the adb. updated that using the sdk manager, copied them to my android folder and then used cmd to link adb to phone. now the usb debugging is working fine
rzr86 said:
connect the device to pc
open a command prompt and do
adb devices
see if it detects it now
also install htc sync.it might help
Click to expand...
Click to collapse
i am having the same problem again even have the updated abd and installed the correct driver but my computer is not detecting my phone neither is adb detecting. help plz
huzefaonline said:
i am having the same problem again even have the updated abd and installed the correct driver but my computer is not detecting my phone neither is adb detecting. help plz
Click to expand...
Click to collapse
ok lets take things from the beginning again
check usb debugging mode
htc drivers
install/uninstall htc sync in any case
use usb 2.0 ports not 3.0
use also different usb ports
also try this app
https://play.google.com/store/apps/details?id=com.ramdroid.adbtoggle&hl=el
rzr86 said:
ok lets take things from the beginning again
check usb debugging mode
htc drivers
install/uninstall htc sync in any case
use usb 2.0 ports not 3.0
use also different usb ports
also try this app
https://play.google.com/store/apps/details?id=com.ramdroid.adbtoggle&hl=el
Click to expand...
Click to collapse
OK.
usb debugging is enabled but no enable sign on the rom and my computer doesnt show any sign on the computer.
htc drivers installed
htc sync uninstalled
using usb 2.0 port
have tried all the ports in system. none of them work.
Adb toggle app is also not working
huzefaonline said:
OK.
usb debugging is enabled but no enable sign on the rom and my computer doesnt show any sign on the computer.
htc drivers installed
htc sync uninstalled
using usb 2.0 port
have tried all the ports in system. none of them work.
Adb toggle app is also not working
Click to expand...
Click to collapse
install htc sync again
if fails then maybe something is wrong with usb
have you tried a ruu.exe?
rzr86 said:
install htc sync again
if fails then maybe something is wrong with usb
have you tried a ruu.exe?
Click to expand...
Click to collapse
ok. let me search xda for ruu.exe. btw whats it for?
huzefaonline said:
ok. let me search xda for ruu.exe. btw whats it for?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1672425
ruu.exe returns the device into completely stock situation as you bought it
but don't worry if you are on S-OFF you won't lose it
then see if you have better results with adb usb
Guys im facing this error whenever I try to transfer data. I have attached the screenshot below. Please do take a look and help me you.
Thank you
anshmiester78900 said:
Guys im facing this error whenever I try to transfer data. I have attached the screenshot below. Please do take a look and help me you.
Thank you
Click to expand...
Click to collapse
Use a different usb cable, drivers installed correctly?, rebooting the pc might help. Usb debugging enabled?
You are maybe trying to transfer a big file and a lot of files. A friend wasn't able to transfer his old HTC files (300) to his new N5 so he opted for a WiFi transfer.
Primokorn said:
You are maybe trying to transfer a big file and a lot of files. A friend wasn't able to transfer his old HTC files (300) to his new N5 so he opted for a WiFi transfer.
Click to expand...
Click to collapse
hmm, it seems i will have to do the same. As I'm unable to take the backup , I'm not able to unlock the boatloader and root it :crying:
gee2012 said:
Use a different usb cable, drivers installed correctly?, rebooting the pc might help. Usb debugging enabled?
Click to expand...
Click to collapse
Yeah i have tried using different USB cable, and yes usb debugging is on.
anshmiester78900 said:
hmm, it seems i will have to do the same. As I'm unable to take the backup , I'm not able to unlock the boatloader and root it :crying:
Click to expand...
Click to collapse
Backup with adb
http://forum.xda-developers.com/showpost.php?p=50376635&postcount=3651
Primokorn said:
Backup with adb
http://forum.xda-developers.com/showpost.php?p=50376635&postcount=3651
Click to expand...
Click to collapse
Thanks a lot mate ! :good::fingers-crossed:
If you have a recovery installed, boot into recovery and mount storage. Then it will work flawlessly.
I had this issue as there were files which contained special characters like : ... Windows didn't like it and stopped copying.
Sent from my Nexus 5 using XDA Free mobile app
Hello all,
I am getting same issue in sap, I did client export through SCC8 when copying data file from trans directory it showing specified error, please help me...