Related
I'm on CyanogenMod7-7.0.3-NS right now but want to go back to stock 2.3.4 as wavesecure is having issues with Cyanogen and can't verify my sim.
Baseband version: I9020XXKD1
Build Number:GRI40
Will this guide work for my Nexus S? http://forum.xda-developers.com/showthread.php?t=1061855
Sorry newbie here, just want to be really really sure as I followed a poor guide somewhere and got stuck up with the google logo and lock on boot, hence was forced to install cyanogen.
---
UPDATED: 7/8/11
Okay..so to close my question. I just followed this and everything went back to stock.
theunlockr.com/2011/01/20/how-to-unroot-the-nexus-s
1. followed the link above.
2. I remain rooted but recovery went back to stock. no more clockwork.
3. after booting, was alerted of a 2.3.4 update..so I updated again.
4. marketplace has been upgraded to the new interface (probably bec of the update)
5. to install screenshot app and fontchanger..I needed to have super user, so I just installed Clockwork (recovery-clockwork-3.0.2.4-) again and installed SU (su-2.3.6.1-ef-signed.zip) via SD card install.
6. so far, everything's good.
If you have some questions, feel free to ask.
Download a stock rom ( unless you made a nandroid backup)
Turn off you phone then start it while holding vol+
Do a factory reset, wipe cache and dalvik cache( found under advanved)
Flash your stock rom
Sent from my Nexus S using XDA App
Emhalwis said:
Download a stock rom ( unless you made a nandroid backup)
Turn off you phone then start it while holding vol+
Do a factory reset, wipe cache and dalvik cache( found under advanved)
Flash your stock rom
Click to expand...
Click to collapse
thanks! I have made a nandroid backup but I think I may have a corrupted boot.img.
Where can I get a stock rom? Is the one from the link I posted good enough?
Emhalwis said:
Download a stock rom ( unless you made a nandroid backup)
Click to expand...
Click to collapse
Is there a way to return to stock while keeping CWM ?
You can stay on stock rom while you are rooted. You can google it. I got my 2.3.4 from ardoid.com
Its a stock rom with added arabic support. Since you dont need arabic. It wont make any difference to you.
Sent from my Nexus S using XDA App
I'm not asking for keeping root, only to revert back to stock while keeping CWM
Clockworkmod will stay on your phone. As far as i know, all your phone recoveries will be done through cwm
Sent from my Nexus S using XDA App
Emhalwis said:
Clockworkmod will stay on your phone. As far as i know, all your phone recoveries will be done through cwm
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I read somewhere that flashing a stock ROM will restore the stock boot/recovery. Is it true ?
That i cant answer u. But i can say that i went back and forth between roms. Reverting to stock when needed. CWM stayed on my phone.
Sent from my Nexus S using XDA App
Ok, will have try. Thanks
dude if install stock rom via odin then u will loss cwm bt iheard u cn gt .zip files of stock roms using tht u wont loss cwn
Thats what im trying to say. The only way (i think) to lose cwm is using odin. But you can find zip stock roms. Thats what i did
Sent from my Nexus S using XDA App
Okay..so to close my question. I just followed this and everything went back to stock.
theunlockr.com/2011/01/20/how-to-unroot-the-nexus-s
1. followed the link above.
2. I remain rooted but recovery went back to stock. no more clockwork.
3. after booting, was alerted of a 2.3.4 update..so I updated again.
4. marketplace has been upgraded to the new interface (probably bec of the update)
5. to install screenshot app and fontchanger..I needed to have super user, so I just installed Clockwork (recovery-clockwork-3.0.2.4-) again and installed SU (su-2.3.6.1-ef-signed.zip) via SD card install.
6. so far, everything's good.
If you have some questions, feel free to ask.
Thanks for the clarification !
I want to install the ClockworkMod TOUCH 5.5.0.4 v4 . but I found there are many ways to install it , odin and cwm
I have both , but somebody said they have trouble to flash in Cwm and some others said there are some mini error happened when they use the odin way. which way is more safe to flash the ClockworkMod touch instead of my non touch CWM.
if i flash with CWM, the touch will replace the CWM, or they will both installed on my phone???
I've always used Odin with no problems. To my knowledge you can't flash a recovery from a recovery. You could use rom manager from the market if your rooted but I hear bad things about using rom manager to flash clockwork. My advice use Odin
Sent from my SAMSUNG-SGH-I727 using xda premium
please take a look
i agree with you that we can not to flash a recovery with another recover. however, please take a look the link
http://forum.xda-developers.com/showthread.php?t=1472954
the first one is a zip file and the instruction said
( Just flash in CWM
- this one creates the .hidenandroidprogress file for you so you dont need to create it manually)
what is that mean??
i have already flash the non touch CWM on my phone, is it ok to flash this touch with odin , do i need to wipe the data or something i need to be careful before i flash, please let me know. i did not find a instruction detail with that.
Some phones you have to create that file and some you don't. On mine when creating a backup it would hang up. So what I did was flash in Odin the recovery image then installed the zip thru cwm then wipe cache and dalvick cache... also it is important that you have the latest version of busybox installed...
Try flashing the recovery in Odin first and if all works well then don't do anything else but if it hangs on making a backup then do what I said above... if you get stumped just let me know and I'll try to walk you thru it
Sent from my SAMSUNG-SGH-I727 using xda premium
thanks for your answer. let me say my phone first.
att i727
i only rooted with the method on the link : http://forum.xda-developers.com/showthread.php?t=1340526
so the result is i am rooted with cwm installed
and now i want to install the sky ics and the first step is to install the touch recover.
so as you said before. can i just use odin to install the recorvery.tar.md5?? do i need to wipe or do something else?? if i get something wrong, can i use my nandriodrid backup to restore the current recovery?? i am really a noob and new with andriod. thanks in advance.
christianxin said:
thanks for your answer. let me say my phone first.
att i727
i only rooted with the method on the link : http://forum.xda-developers.com/showthread.php?t=1340526
so the result is i am rooted with cwm installed
and now i want to install the sky ics and the first step is to install the touch recover.
so as you said before. can i just use odin to install the recorvery.tar.md5?? do i need to wipe or do something else?? if i get something wrong, can i use my nandriodrid backup to restore the current recovery?? i am really a noob and new with andriod. thanks in advance.
Click to expand...
Click to collapse
1. Yes you can just use Odin and flash cwm touch. I had an earlier version installed and wanted to update so I just cranked up Odin 1.85 click PDA navigate to where you downloaded the tar file make sure repartition is NOT checked and flash away.
2. All you are flashing is a recovery image so no need to wipe anything.
3. Yes if something goes wrong you should be able to restore your backup or if you wanted you could look in the dev section and find the Odin one click 2.3.5 att stock firmware and flash it and start over. But that is not necessary. However I do recommend you download the phones stock firmware from sammobile.com and store it on your PC just in case you ever need it for any reason....
OK I think I covered everything so if you need anymore help let me know and as always happy flashing....
Oh btw flashing is very addictive. I'm a flashaholic... so flash at your own risk
Sent from my SAMSUNG-SGH-I727 using xda premium
I have a galaxy tab 2 7.0 [GT-P3113]
I just flashed cwm recovery on it and rooted it, I've just wanted to try and uninstall clockworkmod and go back to stock recovery, I searched everywhere but I couldn't find anything for my tab model.
I'm running android 4.0.4, didn't flash any ROMs yet.
http://forum.xda-developers.com/showthread.php?p=25892251
That should help you get back to stock.
Sent from my MB870 using xda app-developers app
Maximinus I said:
http://forum.xda-developers.com/showthread.php?p=25892251
That should help you get back to stock.
Sent from my MB870 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I have some questions because I coudln't post a reply to that post.
-I live in egypt and I bought my tab from the US, this rom is for the US so should I flash it normally? (will I get the OTA updates)?
-should I backup my data and so? (sorry it's my first device)
You should get ota's as its 100% stock. As far as flashing it no need to backup anything. You won't have root or cwr to use your backup. Flash via Odin and you should be good to go.
Sent from my GT-P3113 using xda premium
*I done that for my Galaxy Ace, I believe should be the same.
reverting back to Stock from CWM all you need is Odin and stock firmware which able to obtain from sammobile.
flash is with stock ROM via Odin will bring everything back to stock. *after flash, make sure swipe your data & cache OTHERWISE it will stuck and become boot-loop.
kimtatt said:
*I done that for my Galaxy Ace, I believe should be the same.
reverting back to Stock from CWM all you need is Odin and stock firmware which able to obtain from sammobile.
flash is with stock ROM via Odin will bring everything back to stock. *after flash, make sure swipe your data & cache OTHERWISE it will stuck and become boot-loop.
Click to expand...
Click to collapse
I did flash the stock ROM and recovery via odin, and it worked perfectly, thanks for the info thought because once I forgot to wipe data and it was stuck on boot-loop till I reached recovery mode.
I meant isn't there a normal way to go back to android recovery without flashing new ROM?
Can't really have stock recovery AND root... seeing as you install root via CWM
Besides you can do way more with CWM over stock.
Sent from my GT-P5113 using XDA Premium HD app
p3100
he any one knows the link for uninstalling cmw in p3100
and also the unroot package
Create a new thread,don't post on an old one.
If you are rooted with custom recovery you can flash only the stock recovery using mobile odin.
Sent from my GT-P3110 using Tapatalk 2
getting back to original recovery from twrp recovery
i have karbonn smart tab 10 (cosmic) .i have installed twrp recovery on my tab. but i cant find any zip files when i go into recovery and twrp is not working properly.i cant even root my tab. i want to go back to original recovery.please help.
Do you have a P5100 , P5110 or P5113 ? It don´t sounds like!
If not - don´t use this files! This might brick your device!
If you don´t have a P51XX you need to find a Stock-Recovery or Custom-Recovery for your Device.
If you have P51XX download and flash a StockRom - or extract the recover.img inside the XXX_HOME.tar.md5 and make it Odin-Flashable using this tool and flash it with Odin.
Help me pls
HI i have micromax a25 i root my phone using (Root+½-T) then i used mobile uncle app for cwm recover
but after this i cant even open recovery by vol up+power+menu key ............ so i cant even install update or backups................ please guide me to fix............. plz plz im in trouble............ shud i use this method????
how to remive cwm recovery from sony xperia m dual. please help me
Maximinus I said:
http://forum.xda-developers.com/showthread.php?p=25892251
That should help you get back to stock.
Sent from my MB870 using xda app-developers app
Click to expand...
Click to collapse
Please help me to remove cwm recovery from.sony xperia m dual to its stock
shamsul1993 said:
Please help me to remove cwm recovery from.sony xperia m dual to its stock
Click to expand...
Click to collapse
please find your correct thread.
PLEASE HELP!! I have successfully rooted the device and was doing ok after flashing CWmod recovery 6.0.1 through E-Z recovery app and running Liquid Rom. I managed to be dumb enough to flash CWMod version 5.8.4.9 through Rom manager and when I rebooted my phone it got stuck in boot loop. I am able to get into CWMod 5.8.4.9 but I cannot restore my backup anymore. I can also data wipe and install a new rom, but it all just keeps going into bootloop and I cannot get past the samsung custom unlock screen. It first flashed that, then the android man pops up on the next screen like its loading something and then just keeps looping through the process. I did not use ODIN for any of this process and I dont know how to get myself back tothe point where I can reboot. Any help would be tremendously appreciated, because I'm dead stuck and in a panic. Thanks in advance for any assistance.
Happend to me last night...
I made the same mistake... DO NOT download any recoveries from ROM manager. I found out the hard way... So the problem now is your phone is stuck using the recovery you downloaded. I am not sure of a quick way using that recovery if you can revert back but... My solution got me where I needed to be in order to get going again.
I had to use Odin to root to stock ROM. Yes when you wipe it will destroy your data but not your pictures, downloaded files, and other files you put on there. When I re-rooted with stock all my stuff for CM10, gapps, and the kexec CWM was there.
So use this guide...
http://forum.xda-developers.com/showpost.php?p=28530394&postcount=1
Section 1!!!!! And follow the steps EXACTLY the way it says to.
This is why i have never liked rom manager...
The best solution for us to flash recoveries is ez recovery free from the market. I would use this going forward once you Odin back to stock
Sent from my SCH-I535 using xda premium
Same **** happened to me.
Odin. I lost my pics and internal memory though...
Sent from my SCH-I535 using Tapatalk 2
I have Verizons S3. I recently rooted and unlocked the bootloader and have TWRP recovery. I was on 4.1 JB. I made a Nandroid Backup of System and Data. I then flashed the CM10.1 Monthly ROM, and all seemed to be working fine. However, I was having some issues with my app backups and the weird "emulated" directory structure. So I decided to go back to my Nandroid Backup and start over.
I went into TWRP, did a factory reset, cleared System Data, cache/dvalick cache, then I restored the Nandroid Backup (system and data). TWRP said it was successful and asked to reboot. When I did, the Samsung logo flashes, and then the screen stays black. I tried going back into recovery, but it won't let me. I can get to download though.
I think I'm going to have to use Odin to reflash a ROM as I can't get into recovery, right? But I'm also trying to understand what I did wrong. Did I forget a step? Did it have something to do with differences between 4.1 and 4.2? I'm new to this, and have searched the forums but can't find anything that answers my questions specifically. I appreciate the help.
anacree said:
I have Verizons S3. I recently rooted and unlocked the bootloader and have TWRP recovery. I was on 4.1 JB. I made a Nandroid Backup of System and Data. I then flashed the CM10.1 Monthly ROM, and all seemed to be working fine. However, I was having some issues with my app backups and the weird "emulated" directory structure. So I decided to go back to my Nandroid Backup and start over.
I went into TWRP, did a factory reset, cleared System Data, cache/dvalick cache, then I restored the Nandroid Backup (system and data). TWRP said it was successful and asked to reboot. When I did, the Samsung logo flashes, and then the screen stays black. I tried going back into recovery, but it won't let me. I can get to download though.
I think I'm going to have to use Odin to reflash a ROM as I can't get into recovery, right? But I'm also trying to understand what I did wrong. Did I forget a step? Did it have something to do with differences between 4.1 and 4.2? I'm new to this, and have searched the forums but can't find anything that answers my questions specifically. I appreciate the help.
Click to expand...
Click to collapse
You're supposed to backup "boot.img" as well. I'm pretty sure boot.img is the kernel which you failed to backup. The phone won't boot into your nandroid because the kernel wasn't restored as well. In TWRP: system, data, and boot are all supposed to be backed up simultaneously if you want to restore the entire nandroid. Odin flash and make sure to do a proper nandroid with all three that I listed.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
You're supposed to backup "boot.img" as well. I'm pretty sure boot.img is the kernel which you failed to backup. The phone won't boot into your nandroid because the kernel wasn't restored as well. In TWRP: system, data, and boot are all supposed to be backed up simultaneously if you want to restore the entire nandroid. Odin flash and make sure to do a proper nandroid with all three that I listed.
Click to expand...
Click to collapse
Ah, perhaps that "boot" checkbox wasn't check. =P So basically the CM10.1 boot.img is still there, but now the wrong ROM is there so it won't boot? Can I just flash the boot.img with Odin now, or will I need to do a full ROM flash?
anacree said:
Ah, perhaps that "boot" checkbox wasn't check. =P So basically the CM10.1 boot.img is still there, but now the wrong ROM is there so it won't boot? Can I just flash the boot.img with Odin now, or will I need to do a full ROM flash?
Click to expand...
Click to collapse
Flash nandroid and then try to flash a kernel. Might work Idk. Worth a shot.
sent telepathically
---------- Post added at 07:14 PM ---------- Previous post was at 07:13 PM ----------
jdub251 said:
Flash nandroid and then try to flash a kernel. Might work Idk. Worth a shot.
sent telepathically
Click to expand...
Click to collapse
Edit. Are you still not able to get into recovery? Sorry missed that in your post.
sent telepathically
jdub251 said:
Are you still not able to get into recovery? Sorry missed that in your post.
Click to expand...
Click to collapse
No, when I do the button combo for recovery, the word "Samsung" flashes, then "Galaxy S3" logo, but after that nothing...just blank screen. I was on stock Verizon s3 before this, so I guess I need to put that kernel back on the phone? Is the kernel the same as the bootloader? Can I use the unlocked bootloader referenced in this post: http://forum.xda-developers.com/showthread.php?t=1974114?
So, I tried using Odin to flash back the stock JB 4.1.1 kernel, which should have matched my Nandroid backup, but then I got an unlocked padlock on my splash screen and then the yellow triangle. blah. so i flashed a stock no wipe rom and that got me back into touchwiz, but I cant get into recovery no matter what i do. And I still have the padlock. I think I may need to do a stock full wipe rom?
anacree said:
So, I tried using Odin to flash back the stock JB 4.1.1 kernel, which should have matched my Nandroid backup, but then I got an unlocked padlock on my splash screen and then the yellow triangle. blah. so i flashed a stock no wipe rom and that got me back into touchwiz, but I cant get into recovery no matter what i do. And I still have the padlock. I think I may need to do a stock full wipe rom?
Click to expand...
Click to collapse
If you flashed a fully stock rom then you need to root, unlock, and install your custom recovery again.
Sent from my SCH-I535 using xda app-developers app
Ok, so I finally got time to try this again after flashing back to (what I thought) was stock Jelly Bean 4.1. I was following the directions here in this thread: http://forum.xda-developers.com/showthread.php?t=2046439
I get the VRALEC bootchain fine, phone reboots and all seems well. I got to flash TWRP 2.4, do a batter pull, and when I try to boot into recovery mode suddenly there is the Samsung splash screen with an unlocked padlock on it. Then the screen goes black and doesn't go into recovery. When I release the buttons, the phone then boots into the OS. I can still get to the download mode, but for some reason I can't get into a custom recovery. Any help on this? Please?
I used this file to wipe my phone back to stock JB: COMBINATION_I535VRBLK3_I535VZWBLK3_381038_REV09_user_low_ship.tar.md5
Thanks for the assistance. =)
Redo step three like the directions state.
Edit : In that thread, some folks even suggest waiting 5-10 mins after its successfully flashed before booting into recovery.
Sent from my SCH-I535 using xda app-developers app
Forgot to followup here, but I got it working. I left my phone plugged in after flashing the recovery for like 15 minutes. I also released the power button on trying to boot into recovery once the Samsung logo appeared. I finally got into recovery and was so happy. Thanks for the help!
Running mastamoon's unofficial CM 10.1. =)
anacree said:
Running mastamoon's unofficial CM 10.1. =)
Click to expand...
Click to collapse
Perfect! Glad you've got it all working properly!
Sent from my SCH-I535 using xda app-developers app