Related
Just curious, what happens if I follow the rooting steps in the other thread but only do this:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
At this point, what state is the phone in? Do I have full root access to the file system? What are the issues/concerns if I don't proceed with flashing the recovery image. Just trying to understand the process and what each step is for. I understand the part above but can't understand why you have to flash a recovery image and can't just use the phone after root is achieved.
Thanks in advance. FYI...all I want to do with root access is delete some system files, nothing more.
mobilehavoc said:
Just curious, what happens if I follow the rooting steps in the other thread but only do this:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
At this point, what state is the phone in? Do I have full root access to the file system? What are the issues/concerns if I don't proceed with flashing the recovery image. Just trying to understand the process and what each step is for. I understand the part above but can't understand why you have to flash a recovery image and can't just use the phone after root is achieved.
Thanks in advance. FYI...all I want to do with root access is delete some system files, nothing more.
Click to expand...
Click to collapse
You don't have to flash the recovery image. I believe from that code you would have root and can run programs that require root. However, you would be unable to flash a new rom or any other update.zip (which means no auto apps2sd), partition your sd card easily or backup your phone in case something goes wrong. I suppose you are probably just asking for the sake of asking and knowledge but this is why a recovery image is HIGHLY recommended.
chuckhriczko said:
You don't have to flash the recovery image. I believe from that code you would have root and can run programs that require root. However, you would be unable to flash a new rom or any other update.zip (which means no auto apps2sd), partition your sd card easily or backup your phone in case something goes wrong. I suppose you are probably just asking for the sake of asking and knowledge but this is why a recovery image is HIGHLY recommended.
Click to expand...
Click to collapse
thanks. So if I don't flash the recovery image, I can't update to cooked ROMs or do the stuff you suggested but will the phone otherwise function normal? i.e. I can update to a Sprint/HTC update, I can factory reset the phone (assuming that'll kill root), etc.? I may do the whole process with the recovery image later but don't need it right now.
I only need to do this as a stopgap until Sprint/HTC releases an update.
mobilehavoc said:
thanks. So if I don't flash the recovery image, I can't update to cooked ROMs or do the stuff you suggested but will the phone otherwise function normal? i.e. I can update to a Sprint/HTC update, I can factory reset the phone (assuming that'll kill root), etc.? I may do the whole process with the recovery image later but don't need it right now.
I only need to do this as a stopgap until Sprint/HTC releases an update.
Click to expand...
Click to collapse
Well, I wouldnt recommend doing a sprint update either. That will cause you to lose root most likely. The only way then to keep root is wait until we get a dump of the update and then cook a rom that includes root, in which case you would need to flash the recovery image. Updates usually fix the exploits we use to gain root.
chuckhriczko said:
Well, I wouldnt recommend doing a sprint update either. That will cause you to lose root most likely. The only way then to keep root is wait until we get a dump of the update and then cook a rom that includes root, in which case you would need to flash the recovery image. Updates usually fix the exploits we use to gain root.
Click to expand...
Click to collapse
What he said...but yes, at the steps you quoted, mobilehavoc, you are capable of root access (you don't actually have it until you run that "su" command ). That allows you to read and modify otherwise locked away files and tweak to your hearts content!
Ive rooted and played around some but very little and followed everyones instructions very closely ( thank you for teaching a newbie ). Now how do I go back to original state that I backed up ( think I did ).
When I press the power and volume down button I get to the droid on skateboard, then I press the Home for recovery. I get the screen with all the options and I go to nandroid v2.2 restore and press trackball. It says restore latest backup press home to confirm. I do that and get the following error
Error : run 'nandroid-mobile.sh restore' via console.
What does this mean? Do i have to be tethered to PC and run this command from cmd prompt?
I am now lost again, any help is appreciated
Grinder16 said:
Ive rooted and played around some but very little and followed everyones instructions very closely ( thank you for teaching a newbie ). Now how do I go back to original state that I backed up ( think I did ).
When I press the power and volume down button I get to the droid on skateboard, then I press the Home for recovery. I get the screen with all the options and I go to nandroid v2.2 restore and press trackball. It says restore latest backup press home to confirm. I do that and get the following error
Error : run 'nandroid-mobile.sh restore' via console.
What does this mean? Do i have to be tethered to PC and run this command from cmd prompt?
I am now lost again, any help is appreciated
Click to expand...
Click to collapse
Just to confirm since it wasn't mentioned, you did a Nandroid backup earlier right? can you confirm that there's a folder on your sdcard called "nandroid"?
thecodemonk said:
Just to confirm since it wasn't mentioned, you did a Nandroid backup earlier right? can you confirm that there's a folder on your sdcard called "nandroid"?
Click to expand...
Click to collapse
Dont see that folder - I guess that is not good. Any ideas?
Grinder16 said:
Dont see that folder - I guess that is not good. Any ideas?
Click to expand...
Click to collapse
You must do a backup BEFORE you can do a restore..
To clarify for everyone, here's a breakdown of the steps:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
This copies the asroot2 program to the /data/local folder on your phone.
adb shell
This logs you into the phone. From here on out, you are no longer executing Windows commands from a DOS shell - you are actually executing Linux commands on the phone.
chmod 0755 /data/local/asroot2
This changes the permissions on the asroot2 program so that it can be executed.
/data/local/asroot2 /system/bin/sh
This actually runs the root exploit and creates a file called /system/bin/sh that we will later turn into su.
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
This unmounts the /system partition and remounts it as writeable.
cd /system/bin
This puts you into the /system/bin folder.
cat sh > su
This creates the su program.
chmod 4755 su
This changes the persmissions on the su file to allow it to be executed.
theresthatguy said:
You must do a backup BEFORE you can do a restore..
Click to expand...
Click to collapse
I thought I had. What are the steps? I have a flash recovery image on my SD card. I have followed all instructions that I could find
Grinder16 said:
I thought I had. What are the steps? I have a flash recovery image on my SD card. I have followed all instructions that I could find
Click to expand...
Click to collapse
Boot to the recovery image then select "nandroid backup"
jonnythan said:
Boot to the recovery image then select "nandroid backup"
Click to expand...
Click to collapse
Can you provide those steps? Sorry but complete newbie here
"I get the screen with all the options and I go to nandroid v2.2 restore and press trackball. It says restore latest backup press home to confirm. I do that and get the following error"
Go there but select Backup instead of Restore.
Turn the phone off, hold the Home key, and turn it on. When you get to the screen with the green text select nandroid backup.
DISCLAIMER: DO THIS AT YOUR OWN RISK. I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR PHONE IN ANY WAY.
Hi Everyone,
I have some good news for the owners of Samsung Galaxy 5 (i5500) Smartphones.
Doing some research on Google and reading about efforts from other people who could install applications on SD card on other android phones, I was able to develop a method to install application into SD card for the Galaxy 5. Better yet, you won't even need a custom Rom.
Before I get into the specifcs let me state that the following steps are manual and no application is provided to automate the process, so advanced computer skill is required and some knowledge of unix/linux is a plus.
Here we go: PLEASE READ THE WHOLE THING BEFORE YOU START. I MAY HAVE OMMITED SOME COMMANDS OUT OF LACK OF ATTENTION.
1) You'll need to root your phone. There is a lot of guides about this available, just google for it. I've used the SuperOneClick Root to do this.
2) Partition your sd card like this: 1 - FAT, 2 - Linux ext2. Again, there is a lot of guides about this on the net, just google again. I've used Paragon Partition Manager 2010 to lower the size of my FAT partition, leaving a 550MB unallocated space at the end of the card. Then I formatted this space as ext2 in linux, using ubuntu live CD. Most guides around there recommends that you keep this partition between 500~750MB, so I didn’t try with greater sizes. Also, i kept my partition 1 as FAT 16, but FAT 32 might actually work too, try that if you want and post me a reply.
3) Download Titanium Backup (or another app backup tool) from market and backup your applications. You may need to restore your applications to correct some permission problems that may occur after completing this guide.
4) Install busybox. BusyBox is a software application that provides many standard Unix tools, which are not available on stock android. You can get a copy of busybox by clicking on “problems?” button on Titanium Backup main window. It will get installed on /data/data/com.keramidas.TitaniumBackup/files.
5) If you still don’t have Android SDK installed on your PC, download and install it from Google. You’ll need ADB (Android Debug Bridge), which is included in the SDK, to proceed. Now open a shell connection with your device by typing:
Code:
adb shell
Just keep in mind that you MUST be logged as root. Root command prompt is recognized by the # character. If you don’t have root type the ‘su’ command. If even with ‘su’ you couldn’t get root, please review step 1.
6) Create ‘sd’ folder int /system:
Code:
cd /system
mkdir sd
7) Mount ext2 partition into /system/sd
Code:
mount -t ext2 /dev/block/mmcblk0p2 /system/sd
8) Create a folder to store the applications into ext2 partition:
Code:
cd /system/sd
mkdir app
9) Copy busybox to /system/bin
Code:
cat /data/data/com.keramidas.TitaniumBackup/files/busybox > /system/bin/busybox
chmod 755 /system/bin/busybox
10) Copy your applications to ext2 partition:
Code:
busybox cp /data/app/* /system/sd/app/
11) Change permissions of copied applications:
Code:
cd /system/sd/app
chown system.system *
chmod 644 *
12) Now comes the tricky part: making Android mount your new partition at boot time. All the hard work would be useless if Android discarded the mount points every time we restarted our phones. To do this we’ll need to create 2 scripts and store then into /system/etc. Obviously the scripts should be started by init.rc and need to run as root. Fortunately Android’s init.rc have a gap that makes this possible. The scripts are named install-recovery.sh and init-sd2.sh.
install-recovery.sh content:
Code:
#!/system/bin/sh
/system/etc/init-sd2.sh&
init-sd2.sh content:
Code:
#!/system/bin/sh
MYLOG=/data/install-recovery.log
echo "$(date) Starting install-recovery.sh" > $MYLOG
echo "$(date) Waiting SD to become ready..." >> $MYLOG
sleep 10
mount -t ext2 /dev/block/mmcblk0p2 /system/sd 1>>$MYLOG 2>>$MYLOG
mount -o bind /system/sd/app /data/app 1>>$MYLOG 2>>$MYLOG
mount >> $MYLOG
echo "$(date) Finishing install-recovery.sh" >> $MYLOG
If you plan to edit this files on windows I recommend a tool that is capable of keeping UNIX file format, just like notepad++ free tool.
13) After placing the scripts, change their permissions:
Code:
cd /system/etc
chmod 555 install-recovery.sh
chmod 555 init-sd2.sh
14) Rename the default application folder. If everything works fine you can remove this later to save space:
Code:
cd /data
mv app app_old
mkdir app
chown system.system app
chmod 755 app
15) Restart your phone and cross your fingers
16) If you have problems with your widgets don’t worry. You just need to remove then from your homescreen and add again.
17) Check if your applications are running as they should. Restore backups you’ve made with Titanium Backup for the applications showing problems.
18) If your partition didn’t mount at boot, check log file at /data/install-recovery.log
19) From now on your new applications will be installed on your SD Card. You can modify the scripts to store other folders from /data into the ext2 partition as needed. I’ve been running my applications from SD Card for a week now without any problems or bugs.
20) If you can’t make it work, post your question here and I will try to help you out.
21) Donations are welcomed, just drop some money into my paypal account. Just kidding
Good luck and cya!
can this script use for moving /data/data to EXT2?
if can, from where i should start type the script?
i'm still newbie on this
so i'm alittle bit confused, i hope you can help me and sorry for my bad english
i'm already succes from step 1 to step 11
but i'm little confused at step 12
can you explain how to make the script?
should i make those 2 script via notepad++ and then copy it to /system/sd and then continue to step 13?
or should i just type everything on step 12 after step 11 in cmd prompt?
the problem is, if i make the script from notepad++ the android system will just discard my mount point when i restart my phone
and if i just type everything on the step 12 in comand prompt, when i'm type chmod 555 install-recovery.sh and chmod 555 init-sd2.sh like in the step 13, it always say that install-recovery.sh and init-sd2.sh file is not found?
so what should i do?
i'm stuck on step 12
step 12, type it on notepad++ and then you have to change the extension of the file with .sh, after that copied the 2 files to /system/etc
andikasuhendar said:
step 12, type it on notepad++ and then you have to change the extension of the file with .sh, after that copied the 2 files to /system/etc
Click to expand...
Click to collapse
i've already done that
but when i make the script via notepad ++, i'm already make the save type become .sh, so isn't it just the same?
but when i reboot the phone it's still not working
But how to copy this two script files to system/etc??? it's saying permision denied..
But how to copy this two script files to system/etc??? it's saying permision denied..
Click to expand...
Click to collapse
I'm use root explorer to move it to system/etc
The script can be moved but it still doesn't work at all :-(
-------------------------------------
Sent via the XDA Tapatalk App
And i can't move them even with root explorer.. i don't get what i'm doing wrong (
@agus
about the scripts, u can check with root explorer, try to view the script and make sure it was the exact same from the script above, coz i experience the same problem for the first time i try this. if u sure that the script are same then try to execute it using root explorer and then go to titanium backup and see if there is there is another storage (usually there is internal and SD card only).
@stasic
use the root explorer to copy the script to /system/etc, don't forget to change the root explorer option from R/O to R/W, this option should be on top of the page, just touch it to change from R/O to R/W.
andikasuhendar said:
@agus
about the scripts, u can check with root explorer, try to view the script and make sure it was the exact same from the script above, coz i experience the same problem for the first time i try this. if u sure that the script are same then try to execute it using root explorer and then go to titanium backup and see if there is there is another storage (usually there is internal and SD card only).
@stasic
use the root explorer to copy the script to /system/etc, don't forget to change the root explorer option from R/O to R/W, this option should be on top of the page, just touch it to change from R/O to R/W.
Click to expand...
Click to collapse
veeeerrrryyyyyyyyy biiiiiiigggggggggggg thaaaaaaannnnnkkkkkssssss brrroooo
you was right, after i check the script via root explorer, the script was not the same, after i fix it, everything works like a charm
in a step 2... how to change linux ext2???
any software can change from FAT to ext2???
I've changed root explorer option to R/W and still no luck..
@agus
sama2 bro AKA ur welcome bro, have fun with the app2sd hehehe
@nima
search on google, how to format EXT2, if i correct u can use paragon partition for windows user, but if u use macintosh u can just go to disk utility and make partition with EXT2 format
@stasic
go to the /system/etc and see if it already R/W or still R/O
It's written that R/W but when I copy and paste still nothing happens..
thx guy.... i must try it
andikasuhendar said:
@stasic
go to the /system/etc and see if it already R/W or still R/O
Click to expand...
Click to collapse
i've rooted my g5 using superoneclick
but i still have R/O in /system/etc
when i tap R/O on the screen, i wont changed to R/W
what should i do?
maaf inggris nya acak2an
@siap
siapakahaku said:
i've rooted my g5 using superoneclick
but i still have R/O in /system/etc
when i tap R/O on the screen, i wont changed to R/W
what should i do?
maaf inggris nya acak2an
Click to expand...
Click to collapse
In your PC command prompt execute:
Code:
adb shell
Make sure you are loged in as root and in ADB SHELL try this:
Code:
mount -o rw,remount /dev/stl12 /system
Then execute:
Code:
mount
If your mount result has a line like the one bellow, with the rw set, you'll be able to copy the files.
Code:
/dev/stl12 /system rfs rw,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
@stasic
stas1c said:
It's written that R/W but when I copy and paste still nothing happens..
Click to expand...
Click to collapse
Try the same thing I posted above. I don't have Root Explorer installed here, so you should be able to finish this guide without it.
stuck in step 2
cant mkdir....
Hi, nice guide!
I succeded with this the first time I tried but now I have changed to a larger sd card and I can't get it to work.
The log file says that it failed to mount the mmcblk0p2 folder, and now when I check it doesn't even exist. What should I do?
Hope I can get help.. thankful for response. /Mattefacit
I've been trying for a couple of days now to try and modify the /system folder because I want to edit the host file and delete standard .apk's. However I just can't get it to work and I don't understand why.
I got a rooted 2.2 legend with modaco stock htc sense rom.
Things I tried:
Root explorer: For some reason I can't write files to the folder. It always says there is not enough free space while there is something like 6mb available. Also, deleting files doesn't actually seem to work. Root exploreres says the files are deleted but after a reboot they are there again!
Also root explorer makes my phone reboot.
ADB: Basically the same thing. Also I don't get adb to work when i'm in recovery mode (red traingle screen, I used to have clockwork but even after trying to reflash the clockwork recovery that just doesn't show up anymore and gone fubar out of the blue....) and want to enter the /system folder.
Terminal app: Same thing as above.
All 3 make my phone reboot.
What am I doing wrong?
I don't use the same phone as you, but I think that /system is usually mounted as read only (ro). Some file managers can mount /system as read/write (rw). Or I think you can chmod /system to 777 in your terminal as su with the command chmod 777 /system. Also I think CWM has an option to mount /system as rw, but I may be wrong. If you chmod, remember to set it back. You'll need to know shell commands and how to read permissions from an ls -a -l command and reset them. Hope this helps.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi, it is possible to root ZiiO tablet with Android 2.2 ?
I try with z4root 1.3.0 but is not working
Is there any other solutions ?
my friend's sister is working as a designer and user experience officer at creative. as far as her knowledge will carry her, the answer to root is NO
in any case, why did you wish to root it? even after you root it, it wun be able to perform up to anywhere normal tablets can
Thanks for the replay, i what root access to try to install Android Market ... do you think is possible?
coljuay said:
in any case, why did you wish to root it? even after you root it, it wun be able to perform up to anywhere normal tablets can
Click to expand...
Click to collapse
Solution
Just finished rooting this damn thing and it wasn't the easiest thing to figure out.
I used a 2 stage process.
Stage 1 (run superoneclick using the psneuter option until it fails)
If you're familiar with this skip to stage 2
get the adb driver from here
configure it to see the ziio using these instructions
get SuperOneClick from here
run it with psneuter root option selected until it stops and says FAILED
Explenation:
The ADB driver is needed for interacting with the tablet in a command line.
SuperOneClick comes with all you need to crack this baby. It loads the psneuter app which gives you temporary shell root and loads busybox on which is an app everybody and their grandmother uses.
Stage 2 (finishing what superoneclick can't)
Go to superoneclick's folder then in the Root folder you find there
Copy the su-v3 file to the adb folder (situated in Program Files/Android/android-sdk/platform-tools
Rename it to simply su
Start cmd and navigate to the adb folder
Use the following commands:
Code:
adb push su /sbin
adb install Superuser.apk
adb shell
chmod 4755 /sbin/su
rm /data/busybox/su
cp /data/local/tmp/busybox /data/busybox/busybox
chmod 4755 /data/busybox/busybox
exit
adb pull /system/ziilabs/init.rc
Open the new file in the adb folder named init.rc
Edit it and change the line
Code:
mount ext4 /dev/block/mmcblk_data1 /data nosuid nodev noatime nodiratime
with
Code:
mount ext4 /dev/block/mmcblk_data1 /data nodev noatime nodiratime
Save the file
Push it back to the ziio using
Code:
adb push init.rc /system/ziilabs/init.rc
Reboot the tablet and you should have root
Explanations:
SuperOneClick fails because it expects normal android file locations, which the ziio doesn't uses (probably to make it harder to root). All the files that are normally held in sbin apear to be in /data/busybox (weird). You have to delete the original su app, load the new su app in the /sbin directory where the superuser apk expects it to be, move the busybox application to the folder where the ziio has it's internal apps and allow it's use.
Thanks to CLShortFuse for superoneclick, to toolzz whose information gathering started me on this trail and thanks to mrrooty whose post here helped me figure out which su version I was suposed to use.
rooting too...
i try the guide and my ziio has now permanent root and android market working fine...
Im going to give it a try as soon as i can find out how to update the drivers in windows. Cant find the device in device manager on XP.
Any tips?
EDIT: OMG thanks so much it worked!! PS you need to shell root first or you cant adb push su /sdin
Thanks! It worked great on my Ziio 10 as well.
Thanks to linkerro!
I also have rooted my Ziio 7". But some additions by using Windows 7 for the guide i have:
1. Every programm (Editor, CMD, etc.) you need to start it as Administrator!
2. I added the file "adb_usb.ini" manually in %USERPROFILE%\.android
3. The Superuser.apk i have copied it manually to /sbin by using ADB
Dont forget to press the THANKS button ;-)
Thanks!
Thx for this Guide.
My ZiiO 10" was rooted and i had google apps alredy installed, but without a change file (/ system / ziilabs / init.rc) Now i edited it with totalcomander on my ziio.
Is this a 100% root pernament?
Work all the root only programs?
Anyone tested Chainfire 3d @ ziio ?
Thanks a lof for guide, i have only one problem with my ziio, i haven't notrification sound i app (gmail, facebook, talk, vCommunicator), it's some fix for this problem ?
help
I am stuck... I cannot get my ziio 7 to appear under adb..
On putting 'adb devices' under cmd it just shows 'List of devices'.. but the list is empty.
With a lot of persistence i finally managed to root and get the market running.
Initially my Ziio 7 did not show under abd devices as the file adb_usb.ini was non existing.. then i followed another thread "Tegra forum about adb-usb driver"...... which helped me create the above mentioned file.. and then got my ziio 7 to appear on the adb devices list.
and following this guide i got the root....but to get the markets and rest stuff installed i have followed the below mentioned guide.
"19300-ziio-shell-root-fully-working-android-market-ad-hoc-fix.html"
avathor said:
Thx for this Guide.
My ZiiO 10" was rooted and i had google apps alredy installed, but without a change file (/ system / ziilabs / init.rc) Now i edited it with totalcomander on my ziio.
Is this a 100% root pernament?
Work all the root only programs?
Anyone tested Chainfire 3d @ ziio ?
Click to expand...
Click to collapse
Yes it is full root, all root requiring apps working 100%
I just want android market, don't need root. Is it possible? how to?
i have full root now... thanks...
ROM Manager
In ROM Manager, which ROM should I choose? Without which, don't believe I can install Google market.
laverdone said:
i try the guide and my ziio has now permanent root and android market working fine...
Click to expand...
Click to collapse
@laverdone What method did you use to install the google apps?
thasan said:
@laverdone What method did you use to install the google apps?
Click to expand...
Click to collapse
guide to installing google apps:
After you have rooted or shell rooted your ziio
1. download rar with the apps from here (http:// www. megaupload .com/ ?d=QSM6ATPB)
2. unrar them into a directory (and rename them to something like googleApps so it's easier to work with)
3. delete app/SetupWizard.apk (you allready have this)
4. use adb to push the files to /data/googleApps (or any directory as long as it's not on the sdcard)
5. run chmod -R 755 /data/googleApps in the adb shell
6. copy the files to /system (cp -rf /data/googleApps/* /system)
7. clean up (rm -r /data/googleApps)
One more thing. The market doesn't see gmail and the other apps as installed so you have to get them again from the market if you want updates.
The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, set flash_image permissions to rwxrwxrwx
5.Download Android Terminal Emulator on Play store
6. Run Terminal Emulator and open up preferences.
7. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
12. CONGRATULATIONS AND YOU ARE BACK TO YANNOU90's RECOVERY
DOWNLOAD LINK:
Flash_Image and Recovery.zip
mrchezco1995 said:
......
2. Flash_image and Recovery (You can download it here on this thread)
......
Click to expand...
Click to collapse
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?
Download link 404..
Sent from my HTC desire_HD using xda app-developers app
beegeevee said:
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?
Click to expand...
Click to collapse
Deivi_Z said:
Download link 404..
Sent from my HTC desire_HD using xda app-developers app
Click to expand...
Click to collapse
Download link fixed. Uploaded it to mediafire instead. Thanks for reminding guys.
permission denied
followed all the steps....still got the "Permission Denied" message
followed all the steps....still got the "Permission Denied" message
Click to expand...
Click to collapse
Check superuser and make sure Terminal is allowed. And type su in all lowercase, not uppercase like SU. That wont work
Sent from my HTC Explorer using XDA
mrchezco1995 said:
The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, download Android Terminal Emulator on Play store
5. Run Terminal Emulator and open up preferences.
6. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
...
After this step what I get is as follows
usage: flash_image partition file.img
sh-3.2#
Click to expand...
Click to collapse
Superuser worked fine on terminal. But also got permission denied on last command in terminal.. should I push it via ADB?
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
[BTW, if you're wondering, the first command identifies as root, the second remounts /system as RW, the last copies the file]
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Thank You. U completed this thread. Decided to use fastboot (faster) instead of terminal emulator way.
SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Mine worked for me on terminal without any problems, but thanks for filling up what I just missrf for others. Hehe
Sent from my HTC Explorer using XDA
mrchezco1995 said:
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
]
Click to expand...
Click to collapse
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck
SherazHashmi said:
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck
Click to expand...
Click to collapse
Why don't you try step 3 from jaggyjag's rooting tutorial....
Sent from my HTC Explorer A310e using xda app-developers app
My HTC Explorer's recovery was stuck green logo, but what thing that helped to get back my clockword recovery
is just downloading you recovery file and renamed it recovery.img
And...
I used Android SDK tool, and used the below command in command prompt and then I reboot the mobile, and I got back:
fastboot flash recovery recovery.img
Thanks for this valuable thread
SU not found !
after changing the INITIAL COMMAND
i restarted d terminal and now the initial command just gets printed and after that i typed 'su'...d output was 'su not found'..
wats d problem ???
I even tried d fastboot method...dats epic, whenever i try to install any .zip from it dis is wat i see
"Installing update...
Installation aborted."
Plz suggest nythng else other than REFLASHING it...its just that sumthng is restricting it to install :laugh:
hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!
iamwin said:
hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!
Click to expand...
Click to collapse
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...
R. SAINT said:
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...
Click to expand...
Click to collapse
got it man!
the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.
Mayank T said:
the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.
Click to expand...
Click to collapse
My initial response to such a situation would be start the phone in fastboot mode and then flash the recovery from there. Download the ZIP here: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100, extract it and double click "recovery.bat" once the phone is in fastboot mode (start phone holding volume down, select fastboot from menu instead of recovery).
This assumes you're on Windows. If you're on Mac/Linux, find the fastboot binary for your platform and run the following command in a terminal:
Code:
./fastboot flash recovery recovery.img
where recovery.img is taken from the ZIP I linked above.
Alternatively, you could install a more up-to-date recovery such as TWRP or a newer build of CWM (not sure of links for the latest versions of either, but have a look around the forum and you should find them. Also some older builds of CWM had bugs [hence this thread exists], but I think the newer builds work fine on the Explorer; not 100% sure as I still use yannou90's build)