[Q] ds tool and bt file transfer not working - Windows Phone 7 Q&A, Help & Troubleshooting

guys i am new to xda .....i must say u all are doing great job.....i have got a little problem i am able to flash my hd7 with deepshing rom 7 v2 but now my ds supertool is not working it exits after one second and also my bt file transfer only show a message reboot your phone to install drivers....please help

hi !
How did you managed to bluetoth file transfer? thank you
DonĀ“t bother i found the Topic thak you

harjeet_saluja said:
guys i am new to xda .....i must say u all are doing great job.....i have got a little problem i am able to flash my hd7 with deepshing rom 7 v2 but now my ds supertool is not working it exits after one second and also my bt file transfer only show a message reboot your phone to install drivers....please help
Click to expand...
Click to collapse
I will fix both issues with next Deepshining version.
Thanks

ok so it will not work with deepshining rom...so i have to flash another rom

Related

New Firmware for Samsung Galaxy GT - i5801

Hello Galaxy 3 users,
There is new firmware for galaxy 3 aka GT-i5800 / 5801.
This firmware is pretty faster than my previous one I5800XXJI2.
Great firmware launched in this months I5800XXJK1
Thanks samfirmware.com
Link : http://www.multiupload.com/KKYZPLURUK
Password = samfirmware.com
plz tell me steps to use it
Can u plz tell me step by step procedure to us this new firmware in my gt i5081. And i also want to know about risk factor before using it.
Please refer http://forum.xda-developers.com/showthread.php?t=778880
On this link you have to first download ODIN and than use all the instructions or step by step procedures mentiond there.
Thanks
Are the call log and messages opening faster now or are they still the same?
Hey I think there is some problem while installing Angry birds. Stuck at the install screen
While installing on my 5801 i stuck on boot screen
I think this is only for i 5800
Sorry buddy, I am using on my i5801. And its great
One new pre-installed application called places is also added in this firmware.
Njoy.
addicted2088 said:
Are the call log and messages opening faster now or are they still the same?
Click to expand...
Click to collapse
It's pretty much same. :|
anybody tested gps?
madhuranand007 said:
Hello Galaxy 3 users,
There is new firmware for galaxy 3 aka GT-i5800 / 5801.
This firmware is pretty faster than my previous one I5800XXJI2.
Great firmware launched in this months I5800XXJK1
Thanks samfirmware.com
Link : http://www.multiupload.com/KKYZPLURUK
Password = samfirmware.com
Click to expand...
Click to collapse
hi dear,
this is my first post as android user i bought 5801 four wk back and done something in root and able to run live wallpaper. now today i thought to give upgrade one try and install K1 ver which u r also running and many others after succesfull instllation i saw my home screen and found that Twlauncher is not running and i am getting Force close everytime.
Now i try two more time and same thing happen also there is no icon for setting in menu so i cant see if other things are ok like IMEI no etc...
i am new to this OS and want to know if any other person is having the same problem.
Working Fine now
Ok so here is an Update
1) installation succesfull K1
2) Home screen no Twlauncher
3) No wallpaper changer phone book etc
4) Reboot
5) recovery mood +hard reset
6) reboot
WORKING FINE.
now only have to see if there is any change in terms of performace....
my model no changed
i used this firmware on my 5801, now the boot screen says i5800. In kies too it is being recognised as i5800. restoring earlier firmware doesnt help. kindly advise
i need original firmware for i5801...
pl help...
justchirag said:
i need original firmware for i5801...
pl help...
Click to expand...
Click to collapse
Hi Chirag
I have i5801. If you know how to make the backup of firmware, please tell me. I will help you with it.
i successfully update my phone from 2.1 to 2.2.
Thanks

Problem with Camera Zoom FX Latest Version

Problem with Camera Zoom FX Latest Version :
When the app is running and I press the power button on my phone to lock it,after that i cant unlock it anymore ,i have to remove the battery to fix it ,can you help me pls ?
Why don't you ask the developer and seek for help there? They should have an explanation.
Sent from my customized HTC Sensation with TTP 2
it happens on any camera app i tried ... any idea why ?
Do you have a Custom Rom on your Sensation?
yes i do ,,,
Then test a other Rom.
ok thx ,,,which one you recommend the fastest now ?
ViperSs
can you link me the correct forum pls ?
http://forum.xda-developers.com/showthread.php?t=1671547
many many thanks ,and last question ,.. all apps work fine in here ? navigon ,ect ..?
If Navigon works, i dunno. But the other apps works very fine
ok will try ,tnx
hi again phil1596 ) i installed it but my phone was restarting and i returned my phone to the last rom ... i did not seee proper descrioption on that link for instalation ,,what i am doing wrong ?

[Q] JELLYBLAST V3 make phone slow

Hi guys, m new to this website and a beginner for Android
I have Samsung Galaxy Mini/Pop Plus GT-S5570i
Recently I went through this thread
http://forum.xda-developers.com/showthread.php?t=1679563
and I successfully Installed JELLYBLAST V3 on my Android
But after installing I found that its consuming lot of my phone resources making my phone slow
Plz help my phone lags badly and even it restarts at certain point..
I also can't find the official firmware updates on GT-S5570i
Plz help..
Yes right after using the JELLY BLAST V3 device processing speed was getting slow
Use the update of JELLY BLAST V3 your problem will solve
Sent from my GT-S5360 using xda app-developers app
Link please
andromaki said:
Yes right after using the JELLY BLAST V3 device processing speed was getting slow
Use the update of JELLY BLAST V3 your problem will solve
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
can u please provide me d link
How to update
praveen213011993 said:
can u please provide me d link
Click to expand...
Click to collapse
Bcoz I tried to update it via OTA Updater bt it says Invalid Rom
I hav no Idea wat the error is.
praveen213011993 said:
Bcoz I tried to update it via OTA Updater bt it says Invalid Rom
I hav no Idea wat the error is.
Click to expand...
Click to collapse
Not sure if the OTA updater is a feature of Jellyblast, but if it's accessing the servers from the original ROM and thus stock Samsung Android, it might not recognise your current Jellyblast ROM as valid and thus not allow you to patch or update.
Since the lags seem to be resolved in the most current version of Jellyblast, I suggest you try reflashing that new version before going back to stock.
There's a youtube video a few pages down, explaining how to flash.
http://forum.xda-developers.com/showthread.php?t=1679563
Solved
praveen213011993 said:
Hi guys, m new to this website and a beginner for Android
I have Samsung Galaxy Mini/Pop Plus GT-S5570i
Recently I went through this thread
http://forum.xda-developers.com/showthread.php?t=1679563
and I successfully Installed JELLYBLAST V3 on my Android
But after installing I found that its consuming lot of my phone resources making my phone slow
Plz help my phone lags badly and even it restarts at certain point..
I also can't find the official firmware updates on GT-S5570i
Plz help..
Click to expand...
Click to collapse
Finally I figured it out the problem
Actually I had installed "Launcher Pro" in ma mobile
I uninstalled it and now my phone works well
Thanx guyz for helping me with your informations
wrong kernel?
Hi!
I have a problem. Im installed jellyblast on my phone with cor plenus kernel and its not accept my sim card. without it works fine. (sorry for my bad english. Is there someone who speaks hungarian?) after that im installed px-kernel-20120804-GT5570I. It runs well but no camera and the earphone isnt working. how can i solve this?
i hv galaxy y s5360 n jellyblast v3.5..i mean i updated it to 3.5 using OTA

[Q] JMP v 9 questions, and queries

hi everyone, could not find a thread on this thats why starting it,
FIRST of all hats off to jigar, what an awesome ROM
loving it to the core.
KEEP up the good work jigar
you are a god send.
next just wanted to ask whether i can change build.prop( product model) to GT-i9000 using solid explorer, i have JMP v9 with game patch,
i am asking this cause i have seen ppl soft bricking their phones while attempting to do the same on jelly bean
plz clear my doubts.
thanks in advance
Bro,
Offcourse you can change it easily but do take a backup first so that you can revert back. I always do this first after booting....
Never got bricked but do not change the finger prints.....
BOND1987 said:
Bro,
Offcourse you can change it easily but do take a backup first so that you can revert back. I always do this first after booting....
Never got bricked but do not change the finger prints.....
Click to expand...
Click to collapse
i know that buddy i did it when i was on ics, was working fine, but when i tried doing it after i upgraded to official jb by mmx , phone was soft bricked ( i used es explorer) then i flashed jmp v 9, now my device shows samsung gt-s9081, hence many games in play store are not showing thats y i askd, wheter i can do it in jmp rom, dont wanna reflash rom again, cause i have free version of tb and restoring all the apps one by one is a serious pain in a$$
mohit141785 said:
i know that buddy i did it when i was on ics, was working fine, but when i tried doing it after i upgraded to official jb by mmx , phone was soft bricked ( i used es explorer) then i flashed jmp v 9, now my device shows samsung gt-s9081, hence many games in play store are not showing thats y i askd, wheter i can do it in jmp rom, dont wanna reflash rom again, cause i have free version of tb and restoring all the apps one by one is a serious pain in a$$
Click to expand...
Click to collapse
Yes Bro,
I know this thats why i do this after my first boot. Be sure for this and change it to what you want.
Hit Thanks instead of saying it....
mohit141785 said:
i know that buddy i did it when i was on ics, was working fine, but when i tried doing it after i upgraded to official jb by mmx , phone was soft bricked ( i used es explorer) then i flashed jmp v 9, now my device shows samsung gt-s9081, hence many games in play store are not showing thats y i askd, wheter i can do it in jmp rom, dont wanna reflash rom again, cause i have free version of tb and restoring all the apps one by one is a serious pain in a$$
Click to expand...
Click to collapse
Hi, if you don't mind having a 4.2 camera app then install the attached through CWMR and it will change your device identity to 'Galaxy Nexus' and Android Version to '4.2'
I don't know how but it does this. Do share your comments if this works for you.
Find the attached screenshot I have just captured.
Note: I am not the creator of this Camera 4.2 patch. I downloaded it from here from one of the threads (which I am not able to recall) and hence giving an open credit to the developer/compiler of the same here and also am thankful to him/her. Do not even know if I am allowed to redistribute it here or not.
jmp rom v9
i want to know whether i can use jmp v9 rom for my xolo a800 rooted phone because it is also mtk 6577 device let me know

[q] official firmware - ddmf2

has anyone tried the latest ddmf2 firmware ?
i am having problems with it. wen i play some games..they just fc without any notice..but some games r wrkng fine..only few games fc..i have tried evry possible way but no results.
moreover..wen i use fb or messenger app..the screen starts flickering..this happens with vry few other apps too.
please someone help me with problems.
or if someone using this firmware tell me r u facing any problem ?
thank you.
ronak.chawla30 said:
has anyone tried the latest ddmf2 firmware ?
i am having problems with it. wen i play some games..they just fc without any notice..but some games r wrkng fine..only few games fc..i have tried evry possible way but no results.
moreover..wen i use fb or messenger app..the screen starts flickering..this happens with vry few other apps too.
please someone help me with problems.
or if someone using this firmware tell me r u facing any problem ?
thank you.
Click to expand...
Click to collapse
No I didn't find this type of problem. & also I didn't find any changes only the setting telling that this is "Baseband version: S7500DDME1"
Do you have updated throug OTA or Flashed the new rom through odin??
Jayadratha Mondal said:
No I didn't find this type of problem. & also I didn't find any changes only the setting telling that this is "Baseband version: S7500DDME1"
Do you have updated throug OTA or Flashed the new rom through odin??
Click to expand...
Click to collapse
i flashed through odin.

Categories

Resources