Mi700 DroidPad Development
Repost for Hucqim80:
0. MI700 HUCQIM80MOD Rom V.1 only for Build Number 5012_3_16I
I've make a custom rom based on 5012_3_16I which mean if you want to install this rom you have to update your rom from 5012_3_140 to 5012_3_16I at CSL Service Center for free..
WARNING! Use of this custom rom is on your own risk, I will not be held responsible if you broke your devices or data lost..So make sure you backup your current rom so that you could revert back if anything goes wrong..I may help if you have any problem arise..
Requirements:
1)Rooted
2)Clockwork Recovery
3)ROMManager installed
What in this custom rom?
1)Deodexed Apps and Framework
2)Change the default wallpaper..you can change it yourself of course..
3)Useful apps such as market enabler, launcherpro, Rommanager, rootexplorer, titanium backup, Visionary+,and more
4)remove all CSL apps..
How to install?
1)backup your rom with rommanager
2)copy the custom rom to your sdcard root
3)install within rommanager "Install ROM from SD Card"
4)your phone will reboot and install the rom..once finish it will reboot itself..
This Custom Rom is for Build Number 5012_3_16I..to those using Build Number 5012_3_140 don't flash..or your phone will have no network..
Download:
MI700-5012_3_16I-signed.zip from Dropbox
MI700-5012_3_16I-signed.zip - 101.7 MB from Uploading
In case for Build Number 5012_3_140 user who have flashed before and doesn't have nandroid backup..
512_3_140
-------------------------------------------------------------------------------------
1. Rooting the Mi700 DroidPad
Thanks to "Abasir" for the previous instructions (1st rooting instructions). Lityen has written down an updated and concise method:
Rooting the Mi700 just got a whole lot easier. I used the latest version of SuperOneClickv1.5.5.
1. Extract file content.
2. Unmount SD card. Essential for the process to be successful.
3. Connect device.
4. Run Setup from "CD-ROM".
5. Run SuperOneClick.
6. Click Root and it's all done.
-------------------------------------------------------------------------------------
2. Original BOOT IMAGE by Abasir:
Attached in this post (below) is a copy of it, should you want to recover the original ROM.
-------------------------------------------------------------------------------------
3. Clockwork Recovery for DroidPad by Hucqim80:
Instructions are located here: http://forum.xda-developers.com/showpost.php?p=8839597&postcount=167
The latest image for the recovery is from here: http://forum.xda-developers.com/showpost.php?p=9295921&postcount=213
Direct Link to Recovery is: http://uploading.com/files/e96e3m4e/cwrecovery.img/
To All User Of MI700 Who Have Rooted..
You need to boot into clockwork recovery mode and perform backup from there..
By the way please flash a new Clockwork recovery 2.5.1.2...
copy it to the root of your sdcard..
Copy flash_image
if you already have the flash_image skip this
if not download this flash_image.zip unzip it and copy it to the root of your sdcard..
on Terminal Emulator (make sure you hold it in portrait position)
type:
su
press "enter"
then type the following to copy it system/bin:
cp /sdcard/flash_image /system/bin
press "enter"
..but if you have Root explorer installed..copy it to your system/bin
Install flash_image
on Terminal Emulator
type:
su
press "enter"
then type:
chmod 4755 /system/bin/flash_image
press "enter"
Flashing the Clockwork recovery
on Terminal Emulator
type:
su
press "enter"
then type:
flash_image recovery /sdcard/cwrecovery.img
press "enter"
Backing up your rom image
Turn off your devices..when its finally switch off..hold down both vol+ and vol- and at the same time press the power button..you will be booting in Clockwork recovery mode..
"To move around in this mode you will be using Vol+ and Vol-...to move to a single line press and hold the Vol - or +..release it it move to another line..to select it press the Power button(if you get blank screen, press the Power button again and move around with Vol-and+ until you see back menu button disabled/enabled and select it again with Power button)
I know its difficult to move around in this mode even Paul from MoDaCo asking me how to fix this but I believe you will get used with it"
Choose Backup/Restore from the option..this will take some time..once finish making backup..choose Reboot..check your backup in /sdcard/clockworkmod/backup/<date-and-time>/
-------------------------------------------------------------------------------------
4. USB On-The-Go
Work with USB Mini Type A
Devices that work on it (Thanks Abasir) can be read from: http://forum.xda-developers.com/showpost.php?p=8819448&postcount=163
I am a proud owner of the CSL Droidpad, bought it in Low Yat KL for RM1699, paid extra RM100 for upgrading the SD card to 16G. Read your review, pretty impressive stuff given the short time span of 1/2 hour with the unit.
After using for about 2 weeks, I am quite satisfied with it's performance given the budget price I am paying for it. Web browsing is very snappy, no lag and fast, love it except I cannot find Flash in the Market. Maybe I try Adobe website first as it is still in beta phase for android.
The camera is a big letdown, IMO as it is useless it low light condition, but then again a cheap and proper camera should out perform even the high end hand phone cameras.
For games, I a surprised that It gave a superb performance playing Need For Speed Shift, really enjoyed the experience.
Hope someone here could provide assistance in rooting this device as my internal phone memory is down to 50M.
cwleong59 said:
I am a proud owner of the CSL Droidpad, bought it in Low Yat KL for RM1699, paid extra RM100 for upgrading the SD card to 16G. Read your review, pretty impressive stuff given the short time span of 1/2 hour with the unit.
After using for about 2 weeks, I am quite satisfied with it's performance given the budget price I am paying for it. Web browsing is very snappy, no lag and fast, love it except I cannot find Flash in the Market. Maybe I try Adobe website first as it is still in beta phase for android.
The camera is a big letdown, IMO as it is useless it low light condition, but then again a cheap and proper camera should out perform even the high end hand phone cameras.
For games, I a surprised that It gave a superb performance playing Need For Speed Shift, really enjoyed the experience.
Hope someone here could provide assistance in rooting this device as my internal phone memory is down to 50M.
Click to expand...
Click to collapse
Hey, good for you I think you can load Flash unto it, but you will need some technical knowledge to do that.
Oh, one more thing, some have pointed out to me that this is the exact same product as the Camangi FM600 and the Viewpad 7. So if you can find any development forums or developers doing work on them, it will also work nicely on the DroidPad. Have you tried shifting your apps to SD (possible under Froyo)?
Thanks.
Technical knowledge? I am a noob so have to wait for the sifus to try first then I learn from them.
Thank for the info of the other two same models, I keep a look out for it. Hope this thread will come to life with some sifus here owning and experimenting on this device. Yes, I have shift some app to SD card but sad to say most app don't support SD card storage so u can't shift it. Luckily for me the Dolphin HD browser supports shifting cos the memory needed is whopping huge.
cwleong59 said:
Technical knowledge? I am a noob so have to wait for the sifus to try first then I learn from them.
Thank for the info of the other two same models, I keep a look out for it. Hope this thread will come to life with some sifus here owning and experimenting on this device. Yes, I have shift some app to SD card but sad to say most app don't support SD card storage so u can't shift it. Luckily for me the Dolphin HD browser supports shifting cos the memory needed is whopping huge.
Click to expand...
Click to collapse
Hmm... actually CSL is the first company to release that version of the device. Still do not know who is the ODM yet. Anyway, I would love to see CyanogenMod running off this device.
Any developers interested in this device?
hi there
i'm the first in my town to owned this awsome gadget as i am a mobile phone dealer and been following closely to Samsung Galaxy Tab but when my CSL reseller showed me this 7" droidpad with the pinch to zoom feature and quite high processor built in . i fell in love with it. As i'm using HD2 running on froyo this bigger screen really what i wanted so far .
Really appreaciate if any developer out there interested in cooking ROMs , providing Root guide, or App2 Sd guide and not to forget Flash(as informed by CSL techical staff that current version cant support flash)
wth ?!! my damn HD2 with the same froyo 2.2 can jus run it like that .
nicholasses said:
hi there
i'm the first in my town to owned this awsome gadget as i am a mobile phone dealer and been following closely to Samsung Galaxy Tab but when my CSL reseller showed me this 7" droidpad with the pinch to zoom feature and quite high processor built in . i fell in love with it. As i'm using HD2 running on froyo this bigger screen really what i wanted so far .
Really appreaciate if any developer out there interested in cooking ROMs , providing Root guide, or App2 Sd guide and not to forget Flash(as informed by CSL techical staff that current version cant support flash)
wth ?!! my damn HD2 with the same froyo 2.2 can jus run it like that .
Click to expand...
Click to collapse
Good to hear that... actually, the Apps2SD is available under Froyo too... just that you have to manually do it and only for certain apps that support that function. Anyway, you are right... I wish more developers would support this budget tablet, but then again, how many developers are actually Malaysians who can get their hands on this?
I will try to root it when I get my hands on the review unit next week, but in the meantime, have you tried all the rooting methods available to similar devices (using the same CPU) like HTC Legend and Aria?
just to post some info from CSL Mi700
from the terminal emulator, cat /proc/cpuinfo gives:
#############################
processor : ARMv6-compatible processor rev 5 (v61)
BogoMIPS: 599.65
Features: swp half thumb fastmult vfp edsp java
CPU implementer : 0x41
CPU architechture : 6TEJ
CPU variant : 0x1
CPU part : 0xb36
CPU revision : 5
Hardware : QCT MSM7x27 SURF
##############################
so that's ARM11, not cortex A8, i think that means no Flash. but msm7227 include L2 cache and floating point unit; also adrena200 GPU. for 800x480 performance should be quite acceptable.
which market app give the best hardware info? i can try that and post the result here
snow_android said:
just to post some info from CSL Mi700
from the terminal emulator, cat /proc/cpuinfo gives:
#############################
processor : ARMv6-compatible processor rev 5 (v61)
BogoMIPS: 599.65
Features: swp half thumb fastmult vfp edsp java
CPU implementer : 0x41
CPU architechture : 6TEJ
CPU variant : 0x1
CPU part : 0xb36
CPU revision : 5
Hardware : QCT MSM7x27 SURF
##############################
so that's ARM11, not cortex A8, i think that means no Flash. but msm7227 include L2 cache and floating point unit; also adrena200 GPU. for 800x480 performance should be quite acceptable.
which market app give the best hardware info? i can try that and post the result here
Click to expand...
Click to collapse
Yeah, I realised that recently. However, I think we might still be able to put in Flash Lite, like what HTC put into Aria and Legend. They are running on Arm11 also. Cortex A8 is Arm7.
I think for now, the biggest issue is: how to root this phone? Once we can do that... we can try to access the bootloader and put in some custom ROMs
CSL Spice Mi700 / Viewsonic Viewpad 7 / Camangi FM600 / Olive Pad VT100
So far there isn't any way to root this device, 1-click or manually. Pls HELP!!
a little bit more info
[System]
Model: CSL_Spice_MI700
Manufacturer: FIH
Device: MI700
Product: MI700
Brand: CSL_Spice
Bootloader ver.: unknown
CPI ABI: armeabi
CPI ABI 2: unknown
Hardware: qcom
Radio: unknown
Kernel Version: 2.6.32.9
[email protected] )
#1 PREEMPT Thu Sep 9 09:30:59 CST 2010
Build Number: FRF91
Release: 2.2
SDK: 8
[Display]
Screen Size: 800x480
Density DPI: Medium (160)
Logical Density: 1.0
Font Scaling Factor: 1.0
Pixels Per Inch X: 160.0
Pixels Per Inch Y: 160.42105
[Graphics]
GL Renderer: Adreno 200
GL Version: OpenGL ES-CM 1.1
GL Vendor: Qualcomm
Max Texture Size: 4096
Max Texture Units: 2
GL Extensions: GL_AMD_compressed_3DC_texture GL_AMD_compressed_ATC_texture GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_vertex_buffer_object GL_ATI_compressed_texture_atitc GL_ATI_texture_compression_atitc GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_stencil_wrap GL_OES_EGL_image GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_draw_texture GL_OES_extended_matrix_palette GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_mirrored_repeat GL_OES_texture_npot
[Sensors]
[unknown]
Vendor: Bosch Sensortec
Version: 100
Max Range: 0.0
Resolution: 0.0
Power: 0.0
[MS-3C Magnetic Sensor]
Vendor: Yamaha Corporation
Version: 100
Max Range: 300.0
Resolution: 1.0
Power: 4.0
[MS-3C Orientation Sensor]
Vendor: Yamaha Corporation
Version: 100
Max Range: 0.0
Resolution: 0.0
Power: 0.0
[Light Sensor]
Vendor: CAPELLA Corporation
Version: 91
Max Range: 0.0
Resolution: 0.0
Power: 0.0
from DeviceInfo
snow_android said:
a little bit more info
[System]
Model: CSL_Spice_MI700
Manufacturer: FIH
Device: MI700
Product: MI700
Brand: CSL_Spice
Bootloader ver.: unknown
CPI ABI: armeabi
CPI ABI 2: unknown
Hardware: qcom
Radio: unknown
Kernel Version: 2.6.32.9
[email protected] )
#1 PREEMPT Thu Sep 9 09:30:59 CST 2010
Build Number: FRF91
Release: 2.2
SDK: 8
[Display]
Screen Size: 800x480
Density DPI: Medium (160)
Logical Density: 1.0
Font Scaling Factor: 1.0
Pixels Per Inch X: 160.0
Pixels Per Inch Y: 160.42105
[Graphics]
GL Renderer: Adreno 200
GL Version: OpenGL ES-CM 1.1
GL Vendor: Qualcomm
Max Texture Size: 4096
Max Texture Units: 2
GL Extensions: GL_AMD_compressed_3DC_texture GL_AMD_compressed_ATC_texture GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_vertex_buffer_object GL_ATI_compressed_texture_atitc GL_ATI_texture_compression_atitc GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_stencil_wrap GL_OES_EGL_image GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_draw_texture GL_OES_extended_matrix_palette GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_mirrored_repeat GL_OES_texture_npot
[Sensors]
[unknown]
Vendor: Bosch Sensortec
Version: 100
Max Range: 0.0
Resolution: 0.0
Power: 0.0
[MS-3C Magnetic Sensor]
Vendor: Yamaha Corporation
Version: 100
Max Range: 300.0
Resolution: 1.0
Power: 4.0
[MS-3C Orientation Sensor]
Vendor: Yamaha Corporation
Version: 100
Max Range: 0.0
Resolution: 0.0
Power: 0.0
[Light Sensor]
Vendor: CAPELLA Corporation
Version: 91
Max Range: 0.0
Resolution: 0.0
Power: 0.0
from DeviceInfo
Click to expand...
Click to collapse
Thanks for maintaining the interest on the device. We really need help but none are forthcoming. I have sent some tweets to developers who had rooted devices before, but NONE of them have replied or even taken notice.
I hope maybe the rest of us might try to contact which ever developer that had rooted other devices, and ask for guidance to how to find access to root access. Thanks.
snow_android said:
a little bit more info
[System]
Model: CSL_Spice_MI700
Manufacturer: FIH
Device: MI700
Product: MI700
Brand: CSL_Spice
Bootloader ver.: unknown
CPI ABI: armeabi
CPI ABI 2: unknown
Hardware: qcom
Radio: unknown
Kernel Version: 2.6.32.9
[email protected] )
#1 PREEMPT Thu Sep 9 09:30:59 CST 2010
Build Number: FRF91
Release: 2.2
SDK: 8
[Display]
Screen Size: 800x480
Density DPI: Medium (160)
Logical Density: 1.0
Font Scaling Factor: 1.0
Pixels Per Inch X: 160.0
Pixels Per Inch Y: 160.42105
[Graphics]
GL Renderer: Adreno 200
GL Version: OpenGL ES-CM 1.1
GL Vendor: Qualcomm
Max Texture Size: 4096
Max Texture Units: 2
GL Extensions: GL_AMD_compressed_3DC_texture GL_AMD_compressed_ATC_texture GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_vertex_buffer_object GL_ATI_compressed_texture_atitc GL_ATI_texture_compression_atitc GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_stencil_wrap GL_OES_EGL_image GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_draw_texture GL_OES_extended_matrix_palette GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_mirrored_repeat GL_OES_texture_npot
[Sensors]
[unknown]
Vendor: Bosch Sensortec
Version: 100
Max Range: 0.0
Resolution: 0.0
Power: 0.0
[MS-3C Magnetic Sensor]
Vendor: Yamaha Corporation
Version: 100
Max Range: 300.0
Resolution: 1.0
Power: 4.0
[MS-3C Orientation Sensor]
Vendor: Yamaha Corporation
Version: 100
Max Range: 0.0
Resolution: 0.0
Power: 0.0
[Light Sensor]
Vendor: CAPELLA Corporation
Version: 91
Max Range: 0.0
Resolution: 0.0
Power: 0.0
from DeviceInfo
Click to expand...
Click to collapse
Snow Android: How did you access the terminal emulator??? Mine seem not to be working. Can you use adb? I can't seem to get it connected too... please help.
installed from Market, Android Terminal Emulator by Jack Palevich. The on-screen keyboard only works for this in portrait, even that only some of the times. havent tried others. have not tried adb - anyway maverick 10.10 is still downloading, might have to reinstall a lot of programs
snow_android said:
installed from Market, Android Terminal Emulator by Jack Palevich. The on-screen keyboard only works for this in portrait, even that only some of the times. havent tried others. have not tried adb - anyway maverick 10.10 is still downloading, might have to reinstall a lot of programs
Click to expand...
Click to collapse
Hey, do you have Gmail chat? Can you please add me at erlern [at] gmail? Thanks.
Got my MI700 about 2-weeks ago and keen to root it too...
Don't know if this helps but here goes...
Pressing VolDown while power up brings up the following:
Enter FTM Mode...
SWVer=3.140
MODEL:FM6-0001
HWVer:103
Power on with pressing CAMERA and VOLUME_DOWN keys to leave Auto-FTM.
Pressing VolUp while power up brings up the following:
Flash Mem: SAMSUNG_K524G2GACB(4G/4G)
Modem REV: FXX-3-140-00
Incoming Download Mode
polling, get oemsbl_mode = 1
polling, get oemsbl_mode = 1
polling, get oemsbl_mode = 1
non-stop
In both cases above, need to press the reset button to regain control...
Thanks. FTM means Field Testing Mode... the Model number is that the bootloader version? I have no idea... hmmm...
abasir said:
Got my MI700 about 2-weeks ago and keen to root it too...
Don't know if this helps but here goes...
Pressing VolDown while power up brings up the following:
Enter FTM Mode...
SWVer=3.140
MODEL:FM6-0001
HWVer:103
Power on with pressing CAMERA and VOLUME_DOWN keys to leave Auto-FTM.
Pressing VolUp while power up brings up the following:
Flash Mem: SAMSUNG_K524G2GACB(4G/4G)
Modem REV: FXX-3-140-00
Incoming Download Mode
polling, get oemsbl_mode = 1
polling, get oemsbl_mode = 1
polling, get oemsbl_mode = 1
non-stop
In both cases above, need to press the reset button to regain control...
Click to expand...
Click to collapse
Usb OTG working!!
Sorry off topic here..
I've tried plug in the flashdrive and its worked..use filebrowser you can see its mounted..and also my mini Rii wireless keyboard also work on this droid pad..
you need mini usb to female usb converter..i got this when i buy Apad iRobot..but i have also made another one myself from spare cable..Edit : The one I made not working..maybe because I plugged the one that works earlier..before plugged the one I made few second later..so its still detected as OTG at that time..
good to see this thread....plz keep in touch with the developers....
tell them about mi300 also....its a pice mobile....i own it....its a good phone having same processor as in mi700....!!!
hucqim80 said:
Sorry off topic here..
I've tried plug in the flashdrive and its worked..use filebrowser you can see its mounted..and also my mini Rii wireless keyboard also work on this droid pad..
you need mini usb to female usb converter..i got this when i buy Apad iRobot..but i have also made another one myself from spare cable..
Click to expand...
Click to collapse
Thanks for the tip Will try to test that out
Hi,
I am using Voice Xtreme V30 android jellybean 4.1 device. Device specifications are collected by using Quadrant Standard app and specs are:
System
SDK Version: 4.1.1.
ID: JRO03c
OS Name: Linus
OS version: 3.4.0
Device
Model: Xtreme-V30
Product: Xtreme-V30
Board: Xtreme-V30
Figerpring://:4.1.1./JRO03C/1376357816:user/test-key
CPU
Name: ARMv7 Processor
rev 0 (v7I)
Current Freq.: 1001 MHz
Min freq.: 250.25
Cores: 2
Architecture: 7
BogoMIPS: 1993.93
Hardware: MT6577
Revision:0
Serial Number: 0000000000000000
Memory
Total: 485060 kb
Free: 35348 kb
Inactive: 28352 kb
Display
Resolution: 480x800
Refrest rate: 59.12Hz
Please help me to install CWM recovery mode and I have tired right now my mobile is working fine except unable to boot in recovery mode through power + volume up key while power + volume – ( Odin mode is working )
Asif Hafeez said:
Hi,
I am using Voice Xtreme V30 android jellybean 4.1 device. Device specifications are collected by using Quadrant Standard app and specs are:
System
SDK Version: 4.1.1.
ID: JRO03c
OS Name: Linus
OS version: 3.4.0
Device
Model: Xtreme-V30
Product: Xtreme-V30
Board: Xtreme-V30
Figerpring://:4.1.1./JRO03C/1376357816:user/test-key
CPU
Name: ARMv7 Processor
rev 0 (v7I)
Current Freq.: 1001 MHz
Min freq.: 250.25
Cores: 2
Architecture: 7
BogoMIPS: 1993.93
Hardware: MT6577
Revision:0
Serial Number: 0000000000000000
Memory
Total: 485060 kb
Free: 35348 kb
Inactive: 28352 kb
Display
Resolution: 480x800
Refrest rate: 59.12Hz
Please help me to install CWM recovery mode and I have tired right now my mobile is working fine except unable to boot in recovery mode through power + volume up key while power + volume – ( Odin mode is working )
Click to expand...
Click to collapse
I Dont Think This Device Has CWM
thread: [Q] Xtreme Voice V30 CWM recovery method needed
Recovery mode is not working since i tried to install CWM recovery
Xteme Voice V30 has mediatek mt6577 chipset . its familiar with Chinese handset . I want to update my mobiles android version 4.2 jellybean or 4.4 kitkat
Today hopefully I'm going flash my mobile and my default recovery mode will be working again .
If my mobile doesn't have support of CWM Mode then TWRP will be work or not and I need custom update rom for my mobile.
Dear All,
I had flash my mobile and now I can move into recovery mode by name . android system recovery 3e . i want to update my mobile into 4.2.2 jellybean or 4.4 kikat kindly provide me help . . . .
I recently tried to flash a ROM to my Allwinner A33 tablet. Now, when I power it on, the screen is blank - backlit, but nothing else on the screen. My desktop is a Mac mini running OS X 10.11.4. These are the stats for my tablet (taken from "CPU-Z" app):
Cortex Allwinner A33 / 1.20 GHz
SOC
Cores - 4
Architecture - 4x ARM Cortex-A7 @ 1.20 GHz
Revision - r0p5
Process - 40 nm
Clock speed - 120 MHz-1.20 GHz
CPU load - 20%
GPU vendor - ARM
GPU renderer - Mali-400 MP
GPU load - 0%
Scaling governor - unknown
DEVICE
Model - V90 (astar_y3)
Manufacturer - softwinner
Brand - Allwinner
Board - exdroid
Hardware - sun8i
Screen size - 5.83"
Screen resolution - 800x480 pixels
Screen density - 160 dpi
Total RAM - 2048 MB
Available RAM - 1755 MB (85%)
Internal storage - 1.97 GB
Available storage - 0.70 GB (35%)
SYSTEM
Android vers - 4.4.2
API level - 19
Bootloader - unknown
Build ID - astar_y3-eng 4.4.2 KVT49L 20150721 test-keys
Java VM - Dalvik 1.6.0
OpenGL ES - 2.0
Kernel Architecture - armv7I
Kernel vers. - 3.4.39 (20150721)
Android system recovery <3e>
exdroid4.4.2_r2-a33-v2.0
I've tried using adb and fastboot to push and flash files to my tablet, but adb returns an "error: no devices found" message, while fastboot gives me a "-waiting for any device-" message. Prior to the incident, when using the "./adb devices" command, it would return with "device: 033c1976d7f500000000".
I recently downloaded two files: from GitHub, a33_android_device_astar_master.zip; from chinagadgetsreviews, a33_599x_v90_800x480_gc038-gc0308_1211.img. I'm assuming that the latter file is the firmware for my device. Can either of these files be used to restore my system? If so, how, since it seems that I've bricked my tablet and it isn't recognized?
Thanks in advance for any help!
Happy new year, in the first place!
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a simple tablet, i know..But that's also why, i know it can run much better, especially if the ram is not eaten up too much.
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!:good:
Roberto.
i need this firmware .img , i have tablet genesis gt7320 with rk3168 tv , you can send firmware of you tablet ?