Database Info

How to root the CDMA Hero

Ok everyone. First off do not update your phone if Sprint offers an upate. I don't think they are going to but if they do anytime soon and you update this exploit could likely be fixed. When updates are released the devs will make updates that keep root so do not update!
That said, this is a very newbie guide. This is meant for Windows but I will post instructions for linux as well (Ubuntu). I just need to warn you that I can't adb into my phone from Ubuntu so I have to do it through Windows. Don't know why it doesnt work but it doesnt. Mac users you can always (assuming you can get it to work in Ubuntu) download a live cd and boot into Ubuntu to try this. I don't have a mac (nor do I want one) so I can't give instructions (though I assume they should be relatively the same).
Step 1:
First you need to download the Android SDK. It may soumd confusing but it's not. There are tools in here that we need. You can get it from http://developer.android.com/sdk/index.html. This is a modular SDK and all the tools we need are in this download. Once downloaded you just need to extract it in a directory of choice.
The next thing we download is asroot2. This is a script that was developed that runs an exploit in Android's linux that allows us to run root. The link for that is here: http://forum.xda-developers.com/attachment.php?attachmentid=244212&d=1257621154. Unzip that file and place it in a directory of your choice. Also download http://www.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-heroc-v1.2.3.img and place that into the same directory you extracted asroot2.
Step 2:
Connect the phone to the USB port.
Ubuntu is easy for this (again assuming it works for you). Simply open a terminal and cd into the directory that you extracted the sdk into. Then cd into the tools directory. Then run the following commands:
sudo ./adb push /directory_you_placed_asroot2/asroot2 /data/local/
sudo ./adb shell chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
If all goes well you should be presented with a new prompt. This is the linux terminal built into Android. This will allow us to execute all the commands we need to execute because the asroot2 script gave us root access.
In Windows it is a little more difficult. You have to first install the driver for the phone. When Windows asks you for the drivers direct Windows to the directory you extracted the SDK into. You should see a folder called usb_driver. If you are running the 32 bit version of Windows select the x86 folder. If you are using a 64 bit version then select the x64 folder. Then select the android_usb.inf file. This should install the drivers.
If running XP or lower you will need to go to the start menu and click run, then you enter cmd and press enter. If Vista or higher you will press the start button and type cmd and press enter. When you are at the command prompt you cd to the directory you extracted the sdk into. Then cd into the tools directory. Then execute the following commands:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
Now your phone is officially rooted! We arent done yet though. Now you need to flash the recovery image. If you are still in adb shell type in exit until you are out. You should be in the directory where you extracted the recovery image. If not go there. Type in the following:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
Once that is done, type in adb shell (or sudo ./adb shell in ubuntu). If your command prompt is a dollar sign then type in su and press enter. If it is a pound sign you are good. Then type in the following:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Once that is finished you are done. To reboot into recovery type in adb shell reboot recovery. You should reboot into recovery mode. Right now there is not a lot you can do but once we have some devs who make some roms then we will be well on our way to an even more awesome phone. Any questions please ask away. Also, I am sorry if this tutorial is hard to understand or badly laid out. My daughter is crawling all over me so it's hard to type or think. Good luck all and thanks to everyone who rooted this phone and made the recovery and did such a great job!

chuckhriczko said:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?

You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Anything else you can add would be nice.
Again thanks for the steps! They are clear for me.

rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?

rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img

Treefallingquietly said:
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?
Click to expand...
Click to collapse
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.

Treefallingquietly said:
You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
Click to expand...
Click to collapse
Yes. A nandroid backup completely backs up every piece of information on your phone. It is a complete image of your phone and if it needs to be restored for whatever reason you just load up recovery and can restore it the way it was before.
Treefallingquietly said:
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
Click to expand...
Click to collapse
What do you mean exactly? The only thing that gets copied to an sd card is the nandroid backup so yes, when switching to an sd card just do another backup. Or you can also copy the nandroid folder from your existing sd card to your new one.
Treefallingquietly said:
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Click to expand...
Click to collapse
Yes and no. Just run the ext2/swap/fat32 script and it should be ready for apps2sd. You can convert to ext3 if you want. Generally on normal hard drives ext3 is faster, however there has been some controversy with that on android phones. As for converting to apps2sd, right now the best way is probably the manual method which I can write up a tutorial on as well. The dream forum has some good tutorials on it as they were the first to do it. I actually need to go back and re read some of those because it's been so long since I did it. I tried the apps2sd apk but that didnt seem to work for me.

rockcrawler said:
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.
Click to expand...
Click to collapse
Yeah. The problem is that you are trying to adb shell twice. After you adb push then just run the command adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img. That should work.

chuckhriczko said:
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?

rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
yes he left out the /sdcard/in the path and if you are in teh shell you don't need the adb portion of the command.

rockcrawler said:
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?
Click to expand...
Click to collapse
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.

can i use the rom from modaco? or at least the themes?

magicalan said:
can i use the rom from modaco? or at least the themes?
Click to expand...
Click to collapse
No way! This rom is a GSM rom and if it works at all and does not brick your phone then it wont have the right software to make your phone work. A dev has to create a rom specially for the CDMA Hero that has the right drivers.

chuckhriczko said:
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.
Click to expand...
Click to collapse
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!

rockcrawler said:
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!
Click to expand...
Click to collapse
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.

chuckhriczko said:
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.
Click to expand...
Click to collapse
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>

rockcrawler said:
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>
Click to expand...
Click to collapse
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.

THANK YOU!!!!!
chuckhriczko said:
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.
Click to expand...
Click to collapse
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.

rockcrawler said:
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.
Click to expand...
Click to collapse
If I am able to I will. I understand that the instructions were a little hard to follow for beginners which was what I wanted to avoid. Glad you got it working though. Welcome to the world of Android hacking and please enjoy your stay

I'm getting suck trying to push the recovery img out to my sdcard
Code:
C:\AndroidSDK\tools>adb push recovery-RA-heroc-v1.2.3.img /sdcard/
cannot stat 'recovery-RA-heroc-v1.2.3.img': No such file or directory
I believe I have root access:
Code:
C:\AndroidSDK\tools>adb shell
$ su
su
#

[Q] error: more than one device and emulator???[SOLVED]

So i'm trying to root my asus transformer by following this guide http://forum.xda-developers.com/showthread.php?t=1106587
i got to the part where it says to type the following command
Code:
adb push gingerbreakBB /data/local/
but i get the error
Code:
C:\Android>adb push gingerbreakBB /data/local/
error: more than one device and emulator
I ran adb devices to see what devices it recognises and it says
Code:
C:\Android>adb devices
List of devices attached
304D197CC264A27E device
28841c943012497 device
what now

unplug one of your devices (maybe your phone?) or use
Code:
adb -s 304D197CC264A27E push gingerbreakBB /data/local/
you might have to swap the serial number, depending what you have plugged in.

thanks mate it seemed like it rooted but it didnt lol. i got the progress bar on when i rebooted the device but it doesnt seem to be rooted hhmmmm any ideas?

Sorry, not sure... maybe your phone is rooted instead :0
Try starting over again without your phone plugged in

if you are on linux or have access to a linux machien use this http://forum.xda-developers.com/showthread.php?t=1198303
Otherwise do this http://forum.xda-developers.com/showthread.php?t=1125714

gee one said:
Sorry, not sure... maybe your phone is rooted instead :0
Try starting over again without your phone plugged in
Click to expand...
Click to collapse
LOLOLOL you were right my phone was plugged in HOWEVER it still didnt work. the progress bar did show up again but wasnt rooted
mrevankyle said:
if you are on linux or have access to a linux machien use this http://forum.xda-developers.com/showthread.php?t=1198303
Otherwise do this http://forum.xda-developers.com/showthread.php?t=1125714
Click to expand...
Click to collapse
thanks i'll try that out later today. i think its sign for my to go to sleep its 3 am right now lolol. i'll post what happens today morning

Oh yeh going to sleep did the trick. I woke up and removed everything by doing the commands
Code:
adb shell rm /data/local/tmp/boomsh
adb shell rm /data/local/tmp/sh
and also followed the this video tutorial
http://www.youtube.com/watch?v=WaZ4B60OWmY&feature=player_embedded
aand it worked it!
Thanks gee one and mrevankyle

kassim3 said:
Oh yeh going to sleep did the trick. I woke up and removed everything by doing the commands
Code:
adb shell rm /data/local/tmp/boomsh
adb shell rm /data/local/tmp/sh
and also followed the this video tutorial
http://www.youtube.com/watch?v=WaZ4B60OWmY&feature=player_embedded
aand it worked it!
Thanks gee one and mrevankyle
Click to expand...
Click to collapse
also would like to add to anyone else encountering this error with other uses of adb to make sure all of bluestacks processes are killed.

I had the same issue when I've tried to room my XT1032 (Moto G)... I fail to install with the SuperBoot way! So I've decide to install CWM and a modified recovery.
On my first try, I receive this message:
Code:
error: more than one device and emulator
When I used the command
Code:
adb devices
I've 2 device... My XT1033 and an AndroidEmulator...
C:\Fastboot>adb devices
List of devices attached
emulator-5554 offline
TA88305ZDH offline
Click to expand...
Click to collapse
Also, the command
Code:
adb shell rm /data/local/tmp/boomsh
adb shell rm /data/local/tmp/sh
is not working for me...
I've use the command:
Code:
adb kill-server
After, I've plug back my XT1033 via USB and launch the command:
Code:
adb usb
Only my XT1033 is now show when I use the
Code:
adb devices
!
So, I've finish my installation with
Code:
fastboot-moto-windows flash recovery recovery.testkeys.img
and I've run a sideload installation with:
Code:
adb-windows sideload supersu.motog.zip
Try this and share me your opinion!
---------- Post added at 11:11 PM ---------- Previous post was at 11:10 PM ----------
I had the same issue when I've tried to room my XT1032 (Moto G)... I fail to install with the SuperBoot way! So I've decide to install CWM and a modified recovery.
On my first try, I receive this message:
Code:
error: more than one device and emulator
When I used the command
Code:
adb devices
I've 2 device... My XT1033 and an AndroidEmulator...
C:\Fastboot>adb devices
List of devices attached
emulator-5554 offline
TA88305ZDH offline
Click to expand...
Click to collapse
Also, the command
Code:
adb shell rm /data/local/tmp/boomsh
adb shell rm /data/local/tmp/sh
is not working for me...
I've use the command:
Code:
adb kill-server
After, I've plug back my XT1033 via USB and launch the command:
Code:
adb usb
Only my XT1033 is now show when I use the
Code:
adb devices
!
So, I've finish my installation with
Code:
fastboot-moto-windows flash recovery recovery.testkeys.img
and I've run a sideload installation with:
Code:
adb-windows sideload supersu.motog.zip
Try this and share me your opinion!

ADB

Hello, I have a problem. I'm trying to do some things from my pc in the phone with the ADB Shell and not let me.
My problem is that I put adb: not found.
I do this:
img204.imageshack.us/img204/1832/adbshell.jpg
Worth up here all right but when I have root permissions and everything working I put the commands and none let me get adb remount such or adb pull and nothing makes me adb: not found.
Thank you.

Xele said:
Hello, I have a problem. I'm trying to do some things from my pc in the phone with the ADB Shell and not let me.
My problem is that I put adb: not found.
I do this:
img204.imageshack.us/img204/1832/adbshell.jpg
Worth up here all right but when I have root permissions and everything working I put the commands and none let me get adb remount such or adb pull and nothing makes me adb: not found.
Thank you.
Click to expand...
Click to collapse
if everything is installed correctly then just make sure you are in the platform-tools dierectory eg.
c:\android-sdk\platform-tools\

yes, all is succesfully installed. I started adb shell with cmd of directory platform-tools\adb but when I put code adb remount or other command I appear me adb: not found

AlOpen task manager and see if any adb process is running. If there are kill them and try again :
Also verify that adb. .exe is in the platform -tools folder. Actually it might be in the tools folder if so try running adb from there...
Sent from my Nexus One using xda premium

Xele said:
yes, all is succesfully installed. I started adb shell with cmd of directory platform-tools\adb but when I put code adb remount or other command I appear me adb: not found
Click to expand...
Click to collapse
That's not the way to use adb, so you're not following the guide you're reading correctly.
Usually the guide won't tell you to go to the shell directly, but instead typing something like: adb shell mount -o rw,remount ...
Once you type adb shell you're INSIDE the shell you don't need to call the debugger (adb) anymore...
You shouldn't follow guides without reading them completely and fully understanding them before trying anything.
And by the way you opened two threads with the same question.

Xele said:
Hello, I have a problem. I'm trying to do some things from my pc in the phone with the ADB Shell and not let me.
My problem is that I put adb: not found.
I do this:
img204.imageshack.us/img204/1832/adbshell.jpg
Worth up here all right but when I have root permissions and everything working I put the commands and none let me get adb remount such or adb pull and nothing makes me adb: not found.
Thank you.
Click to expand...
Click to collapse
This is your second warning about creating multiple threads on the same topic. The next incident will result in infractions being issued. Thread closed.

HTC One X Root Assistance

Hey guys. I just got my HOX and have been trying to root it. The software update keeps popping up and I keep refusing, so no worries there. I've got 1.85 right now and have been attempting the methods found here and here, but they just aren't working. I'd prefer to use the manual method. Someone willing to help a guy get started with all this would be the greatest person ever, just saying!

blinkbomber said:
Hey guys. I just got my HOX and have been trying to root it. The software update keeps popping up and I keep refusing, so no worries there. I've got 1.85 right now and have been attempting the methods found here and here, but they just aren't working. I'd prefer to use the manual method. Someone willing to help a guy get started with all this would be the greatest person ever, just saying!
Click to expand...
Click to collapse
check pm

beaups said:
check pm
Click to expand...
Click to collapse
Could you help me too X( ? I got my HOX last night at 8pm; I traded my rooted S2 Skyrocket for it.
Been looking for the past day through forums and google. It's so different from Samsung's phones, but a nice change indeed.
I'm on 1.85 and tried those two methods also. I'm not very familiar with ADB. From reading all night and this morning, I believe I root, unlock bootloader, flash recovery, flash custom roms?

smartnphone said:
Could you help me too X( ? I got my HOX last night at 8pm; I traded my rooted S2 Skyrocket for it.
Been looking for the past day through forums and google. It's so different from Samsung's phones, but a nice change indeed.
I'm on 1.85 and tried those two methods also. I'm not very familiar with ADB. From reading all night and this morning, I believe I root, unlock bootloader, flash recovery, flash custom roms?
Click to expand...
Click to collapse
Follow the instructions in this link http://forum.xda-developers.com/showthread.php?p=30741993
Sent from my HTC One X using xda premium

abhipati said:
Follow the instructions in this link http://forum.xda-developers.com/showthread.php?p=30741993
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thanks. I used this for ADB http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
I remember using it for my S2, but I don't quite understand the directions for the http://forum.xda-developers.com/showthread.php?t=1709296 method. Could you dumb it down for this HOX noob?

smartnphone said:
Thanks. I used this for ADB http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
I remember using it for my S2, but I don't quite understand the directions for the http://forum.xda-developers.com/showthread.php?t=1709296 method. Could you dumb it down for this HOX noob?
Click to expand...
Click to collapse
I'll try to help! all of the following is my interpretation of the rooting method described here: http://forum.xda-developers.com/showthread.php?t=1709296
What you need:
HOX on ATT 1.85
su binary from http://dl.dropbox.com/u/don'tusemeimabadsubinary
EDIT: The su binary above has issues. Use this one instead: http://dl.dropbox.com/u/9060692/su
Make sure HTC sync is NOT RUNNING (down in system tray)
Make sure phone is set to "charge only" and usb debugging is enabled!
Download correct su file (assuming you don't have a problem with this step )
Put su in same directory as ADB. Get to adb command prompt and cd into that directory
Quote from Butters619: cd means change directory. It is a windows command prompt command. So you would type "cd C:\adb" if that was where your adb folder was. Folder and directory can be used interchangeably, although directory is more "correct". We only say folder because GUIs use folders to represent directories.
NEW - pull sim card
NEW - do factory reset
NEW - when reset is complete, do not replace sim, do NOT connect to wifi. Go through setup, go to settings, enable USB debugging. When that's done:
Enter these commands in adb:
adb shell rm /data/data/com.redbend.vdmc/lib/libvd*
adb shell ln -s /data/local.prop /data/data/com.redbend.vdmc/lib/libvdmscomo.so
(If you get file doesn't exist after the FIRST command don't worry - they may not be there)
Now, on the phone, go to settings and check for software update. It will tell you you need to connect to network. Now, replace the SIM OR connect to wifi. Have it check for software update again. When it's done, do NOT click "yes" or "ok" on the phone. Simply:
Enter these commands in adb:
adb shell ls -l /data/local.prop
IF AND ONLY IF you get "file not exists" or anything like that then set your phone's date 2 days ahead and reboot the phone and start over. If you get file info, you're golden. Proceed...
Enter these commands into adb:
adb shell "echo 'ro.kernel.qemu=1' > /data/local.prop"
Reboot via adb by entering this command: adb reboot
After phones reboots
Enter these commands in adb:
adb remount
adb push su /system/xbin/su
adb shell chown 0.0 /system/xbin/su
adb shell chmod 06755 /system/xbin/su
adb shell rm /data/local.prop
adb reboot
You should be rooted.

A cool username said:
I'll try to help! all of the following is my interpretation of the rooting method described here: http://forum.xda-developers.com/showthread.php?t=1709296
What you need:
HOX on ATT 1.85
su binary from http://dl.dropbox.com/u/don'tusemeimabadsubinary
EDIT: The su binary above has issues. Use this one instead: http://dl.dropbox.com/u/9060692/su
Make sure HTC sync is NOT RUNNING (down in system tray)
Make sure phone is set to "charge only" and usb debugging is enabled!
Download correct su file (assuming you don't have a problem with this step )
Put su in same directory as ADB. Get to adb command prompt and cd into that directory
Quote from Butters619: cd means change directory. It is a windows command prompt command. So you would type "cd C:\adb" if that was where your adb folder was. Folder and directory can be used interchangeably, although directory is more "correct". We only say folder because GUIs use folders to represent directories.
NEW - pull sim card
NEW - do factory reset
NEW - when reset is complete, do not replace sim, do NOT connect to wifi. Go through setup, go to settings, enable USB debugging. When that's done:
Enter these commands in adb:
adb shell rm /data/data/com.redbend.vdmc/lib/libvd*
adb shell ln -s /data/local.prop /data/data/com.redbend.vdmc/lib/libvdmscomo.so
(If you get file doesn't exist after the FIRST command don't worry - they may not be there)
Now, on the phone, go to settings and check for software update. It will tell you you need to connect to network. Now, replace the SIM OR connect to wifi. Have it check for software update again. When it's done, do NOT click "yes" or "ok" on the phone. Simply:
Enter these commands in adb:
adb shell ls -l /data/local.prop
IF AND ONLY IF you get "file not exists" or anything like that then set your phone's date 2 days ahead and reboot the phone and start over. If you get file info, you're golden. Proceed...
Enter these commands into adb:
adb shell "echo 'ro.kernel.qemu=1' > /data/local.prop"
Reboot via adb by entering this command: adb reboot
After phones reboots
Enter these commands in adb:
adb remount
adb push su /system/xbin/su
adb shell chown 0.0 /system/xbin/su
adb shell chmod 06755 /system/xbin/su
adb shell rm /data/local.prop
adb reboot
You should be rooted.
Click to expand...
Click to collapse
Thanks. Yeah i've been trying it alld ay but it can't find where my SU is. it's in the same location as the ADB stuff i believe C:\android-sdk-windows. Seem like some of the senior members are willing to go through teamviewer to help the ones who can't do it. I'll try asking them :/

Sorry I couldn't be of any help, but please let me know if/how you get this to work just in case this happens to me when I get my one x.
Sent from my Touch Pro 2 using xda app-developers app
---------- Post added at 08:22 PM ---------- Previous post was at 08:18 PM ----------
blinkbomber said:
Hey guys. I just got my HOX and have been trying to root it. The software update keeps popping up and I keep refusing, so no worries there. I've got 1.85 right now and have been attempting the methods found here and here, but they just aren't working. I'd prefer to use the manual method. Someone willing to help a guy get started with all this would be the greatest person ever, just saying!
Click to expand...
Click to collapse
I wonder if the one who actually started this thread got his/her phone to work...???
Sent from my Touch Pro 2 using xda app-developers app

Someone think they can help me root the phone? I'm on 1.85 and I believe I finally got adb to recognize my device but after that I don't think I'm doing it right
Sent from my SGH-I777 using XDA Premium App

"Not running as root. Try "adb root" first." despite trying "adb root" above

C:\Users\HieAnh>adb root
restarting adbd as root
C:\Users\HieAnh>adb remount
Not running as root. Try "adb root" first.
Click to expand...
Click to collapse
after i do :"adb root" to cmd,
then i get :"restarting adbd as root"
next i do :"adb remount"
but i get :"Not running as root. Try "adb root" first."
a big question for this problem
my phone is rooted, switch ro.secure=0, ro.debuggle=1
pls help me

What response do you get when you type su in shell?

ze7zez said:
What response do you get when you type su in shell?
Click to expand...
Click to collapse
i get :
C:\Users\HieAnh>adb shell
gracerlte:/ $ su
gracerlte:/ #
Click to expand...
Click to collapse

The ADB driver does not care at all whether phone's Android is rooted or not. As you correctly stated one have to run adb root for ADB to gain root access device's Android.
I don't want to examine why adb root in your case doesn't work.
Anyways the following should be a workaround:
Code:
adb devices
adb shell "su -c 'mount -o remount,rw /system'"
...
...

jwoegerbauer said:
The ADB driver does not care at all whether phone's Android is rooted or not. As you correctly stated one have to run adb root for ADB to gain root access device's Android.
I don't want to examine why adb root in your case doesn't work.
Anyways the following should be a workaround:
Code:
adb devices
adb shell "su -c 'mount -o remount,rw /system'"
...
...
Click to expand...
Click to collapse
hmm, i just run
adb pull /data/data
Click to expand...
Click to collapse
but i get
/data/data/: 0 files pulled, 0 skipped.
Click to expand...
Click to collapse
why ?

You have to mount /data partitton as RW.