while trying to update firmware for galaxy tab 7 plus GT-P6200 with odin it stooped at SetupConnection.. then can't open (com)
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Get the latest version of odin, with tab unplugged from pc, make sure Kies isnt running as a backgound process. Start odin, boot tab into download mode and connect.
Exactly what he said. And make sure you open Odin first because some devices even in download mode will stop *looking* for a connection. Ask me how I know. Lol. Stupid captivate.
Oh and also not a development question.
Sent from my sticky fingers because Ice cream sandwiches are tasty.
Moved to General.
My advice: stop using Kies and Odin and switch to Heimdall. It's free, cross platform, open source, and much safer than Odin...
I started posting stock ROMs for flashing with Heimdall here: http://forum.xda-developers.com/showthread.php?t=1517934
aorth said:
My advice: stop using Kies and Odin and switch to Heimdall. It's free, cross platform, open source, and much safer than Odin...
I started posting stock ROMs for flashing with Heimdall here: http://forum.xda-developers.com/showthread.php?t=1517934
Click to expand...
Click to collapse
I've never really understood how Heimdall is "safer". Odin has always worked for me, just sometimes getting stuck at the beginning of the flash at setting up connection, which Heimdall also does many a times. And never saw the meaning of free and open source when it came to flashing firmware on my phone. Both the software have their uses.. Heimdall for flashing individual stuff, and Odin for full firmware. Only advantage you have with Heimdall is that it's crossplatform. The frontend is not even that useful anymore now that it requires packages for flashing. Good thing they have older versions available yet.
But you're right when you say 'Stop using Kies'. that's one software that shouldn't exist.
Related
Hi I got a tab from China i think originally the baseband said ZCLA1. The default search engine and the chinese market app was annoying me since I couldn't read any of that. I thought I could just flash to a stock Euro firmware like XXKL7. . I've tried a few different versions from the Heimdall thread here and also firmwares I d/led from check fusI attempted many times with both heimdall and Odin. Heimdall got the furthest for me. I
Heimdall v1.3.2 would stop at cache and older versions of heimdall would fail at modem.bin both stopping after 100% and saying it could not confirm end of file transfer. after the heimdall update the language changed to russian i think but all the chinese apps were still there and default search baidu.
Code:
Heimdall v1.3.2, Copyright (c) 2010-2012, Benjamin Dobell, Glass Echidna
Initialising connection...
Detecting device...
Claiming interface...
Setting up interface...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke...
Beginning session...
Session begun with device of type: 131072
Uploading PIT
PIT upload successful
Uploading KERNEL
0%
1%
100%
KERNEL upload successful
Uploading RECOVERY
0%
100%
RECOVERY upload successful
Uploading CACHE
0%
100%
ERROR: Failed to confirm end of file transfer sequence!
CACHE upload failed!
Ending session...
Rebooting device...
Odin would always fail before starting until I d/led the the new ICS update.
then i got
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> Sbl.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Right now it seems bricked and I can not do a recovery. I tried to do a search for zcla1 firmware and I couldn't find anything for the P6200. I saw the tab 10.1 and a few others had zcla1 firmware. But is that the same?
Is there something about the chinese tabs that prevents me from installing other firmware? Is there another way for me to install a non chinese firmware?
Also I've noticed everytime I flash with heimdall theres a counter that keeps going up on the download screen of the tab "Custom Binary Download: Yes (13 counts)" Should I need to worry about that?
Thanks for any suggestions you may have!
Perhaps it is a knock off ???
I'm getting same problem. Please help us!
MrNo said:
Perhaps it is a knock off ???
Click to expand...
Click to collapse
I don't believe it is but I really don't know how to prove or disprove that.
So after d/ling a ton of different firmwares and trying each one, I seem to have been able to install something that allows google apps.
Is it right that the Baseband,kernal and build are all different?
I'm a little afraid of trying to install ICS again because I really dunno how I fixed the problem in the first place. Does anyone else know what I can try to make this work? Or has anyone else know anything about these Chinese P6200s?
Try using Odin 1.85 it should work.
same thing here,
purchased a p6200 from china with no google support, wasn't too affraid at the start, just decided to use odin and push another firmware to it...
I tried ICS, nop same error as the original post here, so i tried a EU version, still not, tried a HK version, and still not.
Looks i can just push the original firmware back into it.
Will try to root and use mobile odin see if it can get better,...
Also there's no VPN option in the wireless settings.
Will let you know more about what i can find
Getting somewhere
ok so,...
I successfully flash a stock rom with heimdall using this post method:
http://forum.xda-developers.com/showthread.php?t=1517934
Thanks oarth
And i'm now running on 3.2 HC
Will now try to get the ICS running
will keep you guys posted
And..... Done
Ok, so I made it finally, ICS is running on my +***&"#@// Chinese P6200
Was tough in the first place to deal with it, has, I believe, the chinese ZCLA1 was kind of locked at some point...
I had to create a specific heimdall firmware tar.gz and flash it to the tab.
I'll upload it and link it tomorrow with a brief tutorial and explanation.
First time dealing with any of these, just knew what was rooting, and so on bout 3-4 days ago, so please feel free to let me know in the coming post if i did anything wrong or how it can be improved.
Thanks to XDA community for the different posts i went through, was a BIG help!
Post link for us
sirprize_p6200 said:
Ok, so I made it finally, ICS is running on my +***&"#@// Chinese P6200
Was tough in the first place to deal with it, has, I believe, the chinese ZCLA1 was kind of locked at some point...
I had to create a specific heimdall firmware tar.gz and flash it to the tab.
I'll upload it and link it tomorrow with a brief tutorial and explanation.
First time dealing with any of these, just knew what was rooting, and so on bout 3-4 days ago, so please feel free to let me know in the coming post if i did anything wrong or how it can be improved.
Thanks to XDA community for the different posts i went through, was a BIG help!
Click to expand...
Click to collapse
Hello Guys,
I am facing the same problem with my GT-P6200 Chinese version, now I get stucked on download mode or another screen telling me to connect KIES in restore mode. Could you post the link for tar file that you create and finally get ICS on P6200.
I am downloading now the file that you mention on the link (http://forum.xda-developers.com/showthread.php?t=1517934) and try to get live on my tablet again.
Thanks,
sirprize_p6200 said:
Ok, so I made it finally, ICS is running on my +***&"#@// Chinese P6200
Was tough in the first place to deal with it, has, I believe, the chinese ZCLA1 was kind of locked at some point...
I had to create a specific heimdall firmware tar.gz and flash it to the tab.
I'll upload it and link it tomorrow with a brief tutorial and explanation.
First time dealing with any of these, just knew what was rooting, and so on bout 3-4 days ago, so please feel free to let me know in the coming post if i did anything wrong or how it can be improved.
Thanks to XDA community for the different posts i went through, was a BIG help!
Click to expand...
Click to collapse
sirprize_p6200, could you post your solution? Currently I have a Chinese P6200 keep rebooting at the logo. Bricked? Desperately need a solution.
sirprize_p6200 said:
Ok, so I made it finally, ICS is running on my +***&"#@// Chinese P6200
Was tough in the first place to deal with it, has, I believe, the chinese ZCLA1 was kind of locked at some point...
I had to create a specific heimdall firmware tar.gz and flash it to the tab.
I'll upload it and link it tomorrow with a brief tutorial and explanation.
First time dealing with any of these, just knew what was rooting, and so on bout 3-4 days ago, so please feel free to let me know in the coming post if i did anything wrong or how it can be improved.
Thanks to XDA community for the different posts i went through, was a BIG help!
Click to expand...
Click to collapse
PLEASE can u upload the files you used i need to ressurect on Tab asap.....
Even with PIT file and Phone Bootloader Update checked...
Odin 1.85 log
<ID:0/082> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200DXKL3_P6200OLBKK8_P6200DXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/082> Odin v.3 engine (ID:82)..
<ID:0/082> File analysis..
<ID:0/082> SetupConnection..
<ID:0/082> Initialzation..
<ID:0/082> Set PIT file..
<ID:0/082> DO NOT TURN OFF TARGET!!
<ID:0/082> Get PIT for mapping..
<ID:0/082> Firmware update start..
<ID:0/082> boot.bin
<ID:0/082> NAND Write Start!!
<ID:0/082>
<ID:0/082> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone share any Success story with these Chinese ones?
BR
---------- Post added at 05:22 PM ---------- Previous post was at 05:11 PM ----------
And no Codes entered via keypad works ???
e.g. *#06#, *#1234#, *#197328640#, *#9090# etc...
Regardless of SIM in tablet on no... Really "LOCKED" huh....
Phone is factory Simfree...
How about that tutorial.... I dont want to RIFF-it if I don't need to.
BR
And I can't extract PIT file from device with Heimdall 1.31running on XP
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
Heimdall is a bit glitchy here, sometimes it flashes some partition, sometimes it does not...
I tried lot's of combinations of BOOT.img KERNEL, FactoryFS, SBL1 etc In between Chinese version 4.0.4. GT-P6200_CHN_P6200ZCLPM_P6200OZHLPM_P6200ZCLPG
And Malaysia version 4.0.4. P6200DXKL3_P6200OLBKK8_XME
The goal was not Chinese 4.0.4. Stock Android but it Faled.
I revived tab with odin and stock firmware I had inside in a first place...
Hex editor claims that .pit extracted from my fully working chinese no google and market firmware IS IDENTICAL to serveral here on forum published ones.
So. Since I DO HAVE RIFF JTAG box I am planning to update bootloader even if it bricks device, but cant find any.
Anyone?
BR
Weird... It look's that won't accept different boot even trough Odin...
P6200_APBOOT_P6200XXLQ7_XXXXXXXXX_REV02_user_low_ship.tar.md5
Do I really have to JTAG fully working phone in order to get Google and Market? Hmpfff....
BR
hi :
heimidal not work for me but mobile odin 1.85 work like of charm an recovery installed .
backup and restore work good
also wipe data and cash
i erase all my files and restore all of themes by recovey
I have quite the issue with the phone, i can't flash anything with Odin.
Here's what I did that got me into this mess and hopefully you guys can dig me out of this hole.
The phone was running 4.3, I rooted it using Kingo, then flashed CWM Recovery. When I attempted to reboot it it gave me a screen saying "System software not authorized by Verizon Wireless has been found on your phone..." So, I went into the recovery, opened Odin and tried to flash stock.vzw_root66.tar and got this:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
So is my phone toast or can I fix this, im still a rooting noob, this is only my third phone ive messed with.
Edit: if i reboot the phone after being in the recovery i get "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again"
Medical Cola said:
I have quite the issue with the phone, i can't flash anything with Odin.
Here's what I did that got me into this mess and hopefully you guys can dig me out of this hole.
The phone was running 4.3, I rooted it using Kingo, then flashed CWM Recovery. When I attempted to reboot it it gave me a screen saying "System software not authorized by Verizon Wireless has been found on your phone..." So, I went into the recovery, opened Odin and tried to flash stock.vzw_root66.tar and got this:
So is my phone toast or can I fix this, im still a rooting noob, this is only my third phone ive messed with.
Edit: if i reboot the phone after being in the recovery i get "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again"
Click to expand...
Click to collapse
You should honestly read through the guides on here. 4.3 is locked and you can't run a custom recovery. Root 66 is a stock rooted 4.1 build. You should be happy it isn't flashing because it would hard brick your phone.
Look in the development section and read the 4.3 sticky, Everything you need to know is there and should know for future reference. You have a soft brick, so follow the soft brick repair guide with a 4.3 rom.
BadUsername said:
You should honestly read through the guides on here. 4.3 is locked and you can't run a custom recovery. Root 66 is a stock rooted 4.1 build. You should be happy it isn't flashing because it would hard brick your phone.
Look in the development section and read the 4.3 sticky, Everything you need to know is there and should know for future reference. You have a soft brick, so follow the soft brick repair guide with a 4.3 rom.
Click to expand...
Click to collapse
Honest mistake, thanks for pointing me in the right direction.
Hi everyone,
Firstly, I'm sorry if this is posted in the wrong area but I'm in a state of despair at the moment!
Basically, I was manually backing up my girlfriend's phone to my PC (backing up pictures) - naturally clicking the folders to backup, ctrl+c and then ctrl+v in the relevant folder on my PC and voila. Backup done. Except, it didnt copy all of the files and now my girlfriend has deleted in excess of 400 pictures, most of which of our 6 month old baby that we desperately want back.
I have seen many ways to do this but all seem to need root access - I have tried rooting using many different unikernels (excuse my ignorance, this is the first time I've tried rooting a device!) but none seem to work...
Useful info: Android version: 5.1.1 (out of the box), model number: SM-G920F, Build number: LMY47X.G920FXXU3QOKN.
Any help or advice at all is greatly appreciated and I will forever be in your debt if you can successfully help get my files back. And I'm willing to purchase any payware needed!
EDIT: I have tried: Kingo Root, iRoot, One-click-root, Root Genius, Coolmusters recovery tool, wondershare's recovery tool... essentially all of the first 2 or 3 pages of any Google search remotely related to this.
Download odin 3.7 for windows. And google CF auto root instructions for your device and firmware.
So the links ensure you use the right CF auto root
That should work.
You shouldn't be finding it hard to root whilst on
Lollipop! !
kush2.0 said:
Download odin 3.7 for windows. And google CF auto root instructions for your device and firmware.
So the links ensure you use the right CF auto root
That should work.
You shouldn't be finding it hard to root whilst on
Lollipop! !
Click to expand...
Click to collapse
Thanks! Looks like DiskDigger (Free app on Play store) has recovered all my files and then some... Currently verifying this...
EDIT: DiskDigger recovered files but without being rooted, it only recovered low-res images. I'm still trying to figure out how to root this thing! Why so hard?!
So I've been following this, and all other tuts that I can find, www [dot] ndroidrootz [dot] com/2015/05/how-to-unroot-galaxy-s6-and-s6-edge.html
The phone is bricked and will only go between 2 screens. Download Mode and a screen that shows "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" - but this fails too!
Any way of fixing my girlfriends S6? I just keep getting FAIL in ODIN!
lemons55 said:
So I've been following this, and all other tuts that I can find, www [dot] ndroidrootz [dot] com/2015/05/how-to-unroot-galaxy-s6-and-s6-edge.html
The phone is bricked and will only go between 2 screens. Download Mode and a screen that shows "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" - but this fails too!
Any way of fixing my girlfriends S6? I just keep getting FAIL in ODIN!
Click to expand...
Click to collapse
the smart switch option is a nice way to clean up everything and try again, i know that sounds strange but even the usb cable can make the difference (hope u r using the original one) and odin 3.10 i think should help a bit with all these fail attempt..
in case via smart switch reinstall the drivers and.. let me know if it helped somehow
ps: sorry for bad english
lemons55 said:
So I've been following this, and all other tuts that I can find, www [dot] ndroidrootz [dot] com/2015/05/how-to-unroot-galaxy-s6-and-s6-edge.html
The phone is bricked and will only go between 2 screens. Download Mode and a screen that shows "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" - but this fails too!
Any way of fixing my girlfriends S6? I just keep getting FAIL in ODIN!
Click to expand...
Click to collapse
Jesus christ, what an old guide, no wonder you've ruined it in your desperation.
First, You need a newer version of Odin. (3.10.7)
http://forum.xda-developers.com/attachment.php?attachmentid=3446301&d=1440131361
Then your best bet is to find the exact firmware you were on prior to this mess to have the best chance of keeping your original files in tact if you haven't completely trashed them by now.
Not sure what region / provider your phone is from. Does this look correct?
The link you gave was linking to older versions of android then what you were on to start with.
http://samsung-updates.com/details/58161/Galaxy_S6/SM-G920F/VDI/G920FXXU3QOKN.html
If so download it and flash via odin making sure "nand erase" or "repartition" is not selected!
Hopefully that will get the phone running again.
Then Flash TWRP recovery via odin
http://arter97.com/browse/exynos7420/recovery/twrp/g920fi/arter97-recovery-g920fi-13.0-twrp_3.0.0-0.tar.md5
Finally, reboot into recovery and install supersu to get root.
http://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
self_slaughter said:
Jesus christ, what an old guide, no wonder you've ruined it in your desperation.
First, You need a newer version of Odin. (3.10.7)
http://forum.xda-developers.com/attachment.php?attachmentid=3446301&d=1440131361
Then your best bet is to find the exact firmware you were on prior to this mess to have the best chance of keeping your original files in tact if you haven't completely trashed them by now.
Not sure what region / provider your phone is from. Does this look correct?
The link you gave was linking to older versions of android then what you were on to start with.
http://samsung-updates.com/details/58161/Galaxy_S6/SM-G920F/VDI/G920FXXU3QOKN.html
If so download it and flash via odin making sure "nand erase" or "repartition" is not selected!
Hopefully that will get the phone running again.
Then Flash TWRP recovery via odin
http://arter97.com/browse/exynos7420/recovery/twrp/g920fi/arter97-recovery-g920fi-13.0-twrp_3.0.0-0.tar.md5
Finally, reboot into recovery and install supersu to get root.
http://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
Click to expand...
Click to collapse
Thanks man! Unfortunately, flashing the stock firmware using the link you provided above (I even paid for a faster download!) didn't work, got about 30% through then failed. I've PM'd you with the log but anyone else who can help, see it here below:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Odin 3.10.6 seems to work when others fail try that one bud.
Jimmy1life said:
Odin 3.10.6 seems to work when others fail try that one bud.
Click to expand...
Click to collapse
Thanks mate, tried that and it just fails as with all other attempts. Went a bought a new S6 (£400 later!) and that seems to be the end of it :/ Thanks to all for your advice though! I'll keep trying with the bricked S6!
I tried the Echoe ROM and it broke my device (systemUI crashed wouldn't let me enter my password) so I've been trying to flash to stock through ODIN but so far everything I've found online or on XDA has been failing with:
Code:
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm guessing this is because I have the latest firmware and all the ones I've tried are technically downgrades, however the only place I found that /may/ have the latest files is sammobile but they are offline for the weekend, at least for non premium members, so I can't download it. If anyone can save my device, that would be wonderful. Right now when I boot I get a teal screen with white text telling me an update failed and to use the smart switch software to fix it, but neither that nor kies detect my device in emergency software recovery.
Thanks.
Edit: I found one. If you have the latest T-Mobile this worked for me: http://downloadmirror.co/Urs/G930TU...=ifh+QtHvXXdu3BG6so1geU6FG0+z42IMoxaOMyLSPIo=
oem unlocking off !!!
I'm in the same situation except I flashed a ROM that bootlooped my phone, keis doesn't work for the S7 for some reason, But I'm gonna odin flach the stock ROM. Hopefully with some luck it will work.
Update: Whenever I load the AP, odin freezes... hmm
Just took forever
Daniel_lucas said:
I'm in the same situation except I flashed a ROM that bootlooped my phone, keis doesn't work for the S7 for some reason, But I'm gonna odin flach the stock ROM. Hopefully with some luck it will work.
Update: Whenever I load the AP, odin freezes... hmm
Just took forever
Click to expand...
Click to collapse
yeah, the S7 stock roms are fairly big. I have a pretty beast desktop and it takes over a minute (I think, I didn't actually time it) to load the AP into Odin.
Backstory:
I wanted to unlocked my phone and I got a recommendation from my friend about this site that can do that sort of thing. After working with them, and basically having money stolen from me, we changed my Baseband from CRF3 to CRE1 but we were not able to unlock it.
Dumb, I know, but hey I was optimistic.
Problem:
The mission, if you choose to accept it, is to help me get back to OTA upgrade status with ATT. Right now it stalls @ 32% because it doesn't recognize the file in the modem file location when attempting the OTA update.
When I attempt to upgrade to S5CRF6 from S4CRF3 I am running into an issue with Odin. It says this:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Removed!!
<ID:0/006> Total Binary size: 6871 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I have attempted to use Odin 13.1, the regular version, change USB ports, and change Samsung Drivers. I have tried both versions of the firmware, but I suspect I'm not able to install CRE1 if it's running build CRF3. I know you can have different modems on there just like you could crackberries back in the day.
Firmware/Odin Stats:
Odin Version 13.1_3B
Firmware file: N950USQS5CRF6 https://forum.xda-developers.com/at...n950u-stock-n950usqs5crf6-odin-files-t3821222
Firmware files also attempted: N950USQS4CRE1 https://forum.xda-developers.com/at.../att-n950u-stock-odin-files-firmware-t3795945
Phone Stats:
Phone Version: SM-N950U ATT
Baseband: N950USQS4CRE1
Build Number: R16NW.N950USQS4CRF3
Let me know if you need any more information to help me troubleshoot this issue. I've already spent way too much time on this lol.
Best,
Light
Lightofmine said:
The mission, if you choose to accept it, is to help me get back to OTA upgrade status with ATT. Right now it stalls @ 32% because it doesn't recognize the file in the modem file location when attempting the OTA update.
Click to expand...
Click to collapse
If you're looking to get back to the latest stock, you'll be going to CRJ3. Go HERE
Download the Odin files for N950USQS5CRJ3 and Odin3 v3.13.1
Unzip the CRJ3 package (I recommend 7Zip)
Open Odin and fill the slots
Go into Recovery and do a Factory Reset (Not REQUIRED, but I find it can help)
Reboot to DL mode
Plug in USB cable and after Odin recognizes the device, hit start
kangi26 said:
If you're looking to get back to the latest stock, you'll be going to CRJ3. Go HERE
Download the Odin files for N950USQS5CRJ3 and Odin3 v3.13.1
Unzip the CRJ3 package (I recommend 7Zip)
Open Odin and fill the slots
Go into Recovery and do a Factory Reset (Not REQUIRED, but I find it can help)
Reboot to DL mode
Plug in USB cable and after Odin recognizes the device, hit start
Click to expand...
Click to collapse
I'm such a noob it hurts me. I am going to download this now. I will update with the results.