Database Info

Stay in Hboot

Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help

ayene said:
Please Help me
I want to Flash shiped
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
and when i run it after som step it goes to hboot and in the pc it says customer id error ERROR 131
and say my cid have error or something like that
i try
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed
but the same problem.
Iam in hboot and recovery dont work and it back to hboot
i have ******Security warning****** in top of screen
in adb when i type: fastboot devices it says
SH18NTJ02513 fastboot
and by fastboot getvar all
it says
C:\Users\MMMS>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0002
(bootloader) version-baseband: 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.6
(bootloader) serialno: SH18NTJ02513
(bootloader) imei: 358967044858668
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3979mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0e35ea5b
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
what shood i do. please help
Click to expand...
Click to collapse
Create a goldcard and then try flash the RUU again.

tpbklake said:
Create a goldcard and then try flash the RUU again.
Click to expand...
Click to collapse
i cant go to my rom and stay in hboot.
how can i make gold card without going to rom?

Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.

foX2delta said:
Odd, your cidnum is HTC__J15, the only RUU that has that number is
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
And since your misc-version is 1.27.405.6 that RUU should flash.
I checked
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
And they don't have that cidnum.
Click to expand...
Click to collapse
u mean if I flash it will be ok and I dont need gold card?

Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.

foX2delta said:
Its worth a try, I personalty think it will work.
At the end of the day its worth a try, it has merit.
Click to expand...
Click to collapse
yes yes yes yes. it worked. U R nice man.
just how could i khnow the cid code of e rom?
and can i change my cid ofter s-off and reinstall other ruu?

When you extract the rom.zip (run RUU and go to the temp folder for rom.zip) inside the android-info.txt file.
Yes you can change your cid once you have s-offed and then install the RUU of choice (thats if you like being s-on and stock.
However you better make a goldcard just incase and if I were you i'd s-off and flash sense 3 roms if thats what you want.

Same Problem
Hey,
I have same problem and i have not fixed yet.
Here is some solution about making goldcard, maybe it can help.
And this is my subject follow it maybe somebody help me first..
good luck.

Why not use custom roms or at least pre rooted stock roms?!
Sent from my HTC Desire S using xda premium

[Solved] [Q] Another revert to stock story - need advice

Hello,
I'm trying to revert my phone to the original state. I's been S-OFFed by revolutionary method, so I flashed eng HBOOT as it was suggested in another threads. Then I tried to flash original rom from RUU. At the beginning it gave me the error 155, so I tried flashing directly from fastboot and everything seemed OK until the end, where it wrote a message about some signature failure.
Here is a part of the flashing log:
Code:
</DEBUG></T185928>
</DEBUG></T185930>
<T185930><DEBUG><CMD>fastboot -s HTxxxxxxxx getvar boot-mode</CMD>
</DEBUG></T185930>
<T185931><DEBUG><OUT>boot-mode: RUU (Hboot&Radio PreUpdate)</OUT>
</DEBUG></T185931>
<T185931><DEBUG><CMD>fastboot -s HTxxxxxxxx flash zip C:\Users\username\AppData\Local\Temp\{8A84FC36-535E-409A-94A3-231D50E85D54}\{50F2F878-636A-496F-A7CB-544C067E0C4B}\rom.zip</CMD>
</DEBUG></T185931>
<T190013><DEBUG><OUT>sending 'zip' (253505 KB)... OKAY</OUT>
</DEBUG></T190013>
<T190013><DEBUG><OUT>writing 'zip'... INFOadopting the signature contained in this image...</OUT>
</DEBUG></T190013>
<T190013><DEBUG><OUT>INFOsignature checking...</OUT>
</DEBUG></T190013>
<T190050><DEBUG><OUT>INFOzip header checking...</OUT>
</DEBUG></T190050>
<T190050><DEBUG><OUT>INFOzip info parsing...</OUT>
</DEBUG></T190050>
<T190050><DEBUG><OUT>INFOchecking model ID...</OUT>
</DEBUG></T190050>
<T190050><DEBUG><OUT>INFOchecking custom ID...</OUT>
</DEBUG></T190050>
<T190050><DEBUG><OUT>INFOchecking main version...</OUT>
</DEBUG></T190050>
<T190050><DEBUG><OUT>FAILED (remote: 43 main version check fail)</OUT>
</DEBUG></T190050>
<T190103><DEBUG><CMD>adb devices</CMD>
</DEBUG></T190103>
<T190104><DEBUG><OUT>List of devices attached
</OUT>
</DEBUG></T190104>
<T190104><DEBUG><CMD>fastboot devices</CMD>
</DEBUG></T190104>
<T190105><DEBUG><OUT>HTxxxxxxxxfastboot</OUT>
</DEBUG></T190105>
<T190105><DEBUG><CMD>adb devices</CMD>
</DEBUG></T190105>
<T190106><DEBUG><OUT>List of devices attached
</OUT>
</DEBUG></T190106>
<T190106><DEBUG><CMD>fastboot devices</CMD>
</DEBUG></T190106>
<T190108><DEBUG><OUT>HTxxxxxxxx fastboot</OUT>
</DEBUG></T190108>
<T190108><DEBUG><CMD>fastboot -s HTxxxxxxxx getvar boot-mode</CMD>
</DEBUG></T190108>
<T190109><DEBUG><OUT>boot-mode: RUU (Hboot&Radio PreUpdate)</OUT>
</DEBUG></T190109>
<T190109><DEBUG><CMD>fastboot -s HTxxxxxxxx reboot</CMD>
</DEBUG></T190109>
<T190110><DEBUG><OUT>rebooting... </OUT>
</DEBUG></T190110>
<T190110><DEBUG><CMD>adb kill-server</CMD>
</DEBUG></T190110>
<T190111><DEBUG><OUT />
Now I've an original rom but it is unable to install OTA update as it ends in fastboot and **security warning**. I also noticed that I have superuser still available in the rom.
Here is an ouput from fastboot getvar all
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 11.10.401.4
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4185mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
I would like to hear some advice, what should I do next to fully revert to stock ROM, unroot and be able to use official updates. Thanks.

You should have flashed MISC partition hack from "downgrade HBOOT" thread before running the RUU.
Your problem is this:
<T190050><DEBUG><OUT>FAILED (remote: 43 main version check fail)</OUT>
RUU didn't like your main version.

So,
should I change the main version using the misc_version utility and then rerun RUU flashing process. If so, what kind of version should I choose or it doesn't matter. Right now i'm using the old ROM 1.28.401.1
I don't want to screw things up, that's why I'm asking.

The misc_version script flashes 1.00.000.0 by default, AFAIK. It's fine. Anything below the version you intend to use is fine.

Thanks a lot for the clarification. After changing the main version, RUU flashing went smoothly and all OTA updates installed without problem.

[Q]Big problem with DS. Can't flash any RUU and ROM.

Hello!
I have a big problem with my HTC Desire S. This is all information about my phone:
c:\downsaga>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.118.8
(bootloader) serialno: HT1A4TJ01026
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB009
(bootloader) battery-status: good
(bootloader) battery-voltage: 4122mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.014s
At this moment, the phone does not start. Still see T-Mobile Logo. Nowhere is the software that needs RUU T-Mobile PL version such as above. Any other RUU doesn't work. ANY. I downloaded "RUU_Saga_TMO_PL_1.47.118.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_206156_signed", but this also don't work because it's older than I have.
I tried to do this http://forum.xda-developers.com/showthread.php?t=1318919, but stops at this point: Modifying the version of your phone. I can't do this: Connect the phone using USB cable using "Charge ONLY" and USB Debugging is ON, because my phone doesn't start up. And everything stops at this point: "adb shell chmod 777 /data/local/tmp/misc_version". I see information: "There is no such direction". Anyone Can help me? In this moment I can't do anything and flash any RUU or any ROM. I can't start up my phone.

Take your IMEI number out off that straight away unless you want your phone being cloned!

jelennn said:
Hello!
I have a big problem with my HTC Desire S. This is all information about my phone:
c:\downsaga>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.118.8
(bootloader) serialno: HT1A4TJ01026
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB009
(bootloader) battery-status: good
(bootloader) battery-voltage: 4122mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.014s
At this moment, the phone does not start. Still see T-Mobile Logo. Nowhere is the software that needs RUU T-Mobile PL version such as above. Any other RUU doesn't work. ANY. I downloaded "RUU_Saga_TMO_PL_1.47.118.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_206156_signed", but this also don't work because it's older than I have.
I tried to do this http://forum.xda-developers.com/showthread.php?t=1318919, but stops at this point: Modifying the version of your phone. I can't do this: Connect the phone using USB cable using "Charge ONLY" and USB Debugging is ON, because my phone doesn't start up. And everything stops at this point: "adb shell chmod 777 /data/local/tmp/misc_version". I see information: "There is no such direction". Anyone Can help me? In this moment I can't do anything and flash any RUU or any ROM. I can't start up my phone.
Click to expand...
Click to collapse
so you mean that you already did it unlocking your bootloader then already installing custom recovery like 4ext or CMW right..?
if so...you can installing any custom rom (just choice rooted stock rom or closely like stock rom but already rooted) and flashing boot.img too after that (no needed to flashing boot.img again if you already using 4ext recovery and enabling smartflash from there)..
after your phone back booting normal again..then you can continued step to downgrade process for gaining s-off..that's just if you needed it..
hope this can help..

It's working Many many thanks!!!:laugh:

[Q] Flashing RUU stuck at [RUU]WP,dzdata,0. Damaged Userdata Cache partitions

Can not flash RUU both in FASTBOOT and RUU. Stuck at userdata. Looks like corrupt cache and user data partitions. Any guide to repair these partitions or flashing ruu without these???

After restart stuck at RUU and wouldnt boot into bootloader
abaids said:
Can not flash RUU both in FASTBOOT and RUU. Stuck at userdata. Looks like corrupt cache and user data partitions. Any guide to repair these partitions or flashing ruu without these???
Click to expand...
Click to collapse
After restarting from flashing RUU now its stuck at RUU and would not boot into bootloader even after sending command from fastboot.

abaids said:
After restarting from flashing RUU now its stuck at RUU and would not boot into bootloader even after sending command from fastboot.
Click to expand...
Click to collapse
post the output from this command
fastboot getvar all
don't show your emai and s/n
and which RUU did you use?

getvar
rzr86 said:
post the output from this command
fastboot getvar all
don't show your emai and s/n
and which RUU did you use?
Click to expand...
Click to collapse
below is the getvar result
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.73.401.4
(bootloader) serialno: SH***********
(bootloader) imei: 35***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG58*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3812mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.508s
I have used both gb and ics ruu from this link htc.vi8.info/Sensation-XE/

abaids said:
below is the getvar result
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.73.401.4
(bootloader) serialno: SH***********
(bootloader) imei: 35***********
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG58*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3812mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.508s
I have used both gb and ics ruu from this link htc.vi8.info/Sensation-XE/
Click to expand...
Click to collapse
did you try also the third RUU from the link you show me?
how did you manage to corrupt those partitions?
did you have installed TWRP?

Yes I do had TWRP for long time to install the CODENAME LUNGO firmware as no other recovery allows to install. Having installed this firmware for a month or more I tried to do full wipe to refresh the ROM but cache started giving errors like .E: unable to mount cache error in memory block.
I will try the third RUU today and let you know.

Is there any work around to shift cache and data to sd card from internal memory?

abaids said:
Is there any work around to shift cache and data to sd card from internal memory?
Click to expand...
Click to collapse
yes that's why i asked you if you have TWRP
because the TWRP caused the corrupted partitions
let me find the thread and i will come with edit
edit: here you are
http://forum.xda-developers.com/htc-sensation/help/recovering-data-mount-issues-t2859588

dead
rzr86 said:
yes that's why i asked you if you have TWRP
because the TWRP caused the corrupted partitions
let me find the thread and i will come with edit
edit: here you are
http://forum.xda-developers.com/htc-sensation/help/recovering-data-mount-issues-t2859588
Click to expand...
Click to collapse
sensation is complete dead now, No charging no display at all as I tried to mess with the data partition using info from below thread.
http://forum.xda-developers.com/showthread.php?t=1949372
$ abd shell
~ # umount "directory_name" <---- This command is to make sure the volume isn't already mounted. If you get an error, it just means there is no volume mounted. Disregard.
~ # parted /dev/block/mmcblk0
(parted) rm "partition_number"
(parted) mkpart primary "startblock" "endblock"
(parted) name "partition_number" "partition_name"
(parted) quit
~ # mke2fs -t ext4 /dev/block/mmcblk0p"partition_number"
~ # mount "directory_name"

abaids said:
sensation is complete dead now, No charging no display at all as I tried to mess with the data partition using info from below thread.
http://forum.xda-developers.com/showthread.php?t=1949372
$ abd shell
~ # umount "directory_name" <---- This command is to make sure the volume isn't already mounted. If you get an error, it just means there is no volume mounted. Disregard.
~ # parted /dev/block/mmcblk0
(parted) rm "partition_number"
(parted) mkpart primary "startblock" "endblock"
(parted) name "partition_number" "partition_name"
(parted) quit
~ # mke2fs -t ext4 /dev/block/mmcblk0p"partition_number"
~ # mount "directory_name"
Click to expand...
Click to collapse
can you still boot to the bootloader?

rzr86 said:
can you still boot to the bootloader?
Click to expand...
Click to collapse
No display, no lights. Complete dead. Just gave it to hardware technician if he could find board or memory replacement.

[Q] Stock ROM for HBoot v1.13

Hello all, I was trying to S-off my phone in order to be able to flash hboot of version 2.15(i guess the most supporting). But stumbled upon a problem - I need a live Android, ie ROM running to S-off. But all I have is fastboot and TWRP 2.3.0(some later won't boot too)
I now don't have any ROM at all, all ROMs I tried won't boot on my hboot. Actually that's the reason I'm trying to upgrade my HBoot. It seems to be a vicious circle, unless I find a ROM which will run on my config
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.13.0000
(bootloader) version-baseband: 0.16.31501S.17_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: HT23XW411592
(bootloader) imei: 359901041873577
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4180mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d92cc658
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
As you can see I gained SuperCID already, did it in recovery as a prerequisite for Facepalm S-Off

Solved
OK, I can confirm that RUU_Ville_U_HTC_Europe_1.47.401.1_Radio_0.15.31501S.13_3_10.08.31501S.04L_release_250115_signed
contains boot.img and system.img files which boot on hboot v1.13
In order to flash that system.img I needed to copy it in recovery to /sdcard,
Code:
mount -o loop
it and manually copy the contents to /system, because flashing with fastboot failed:
Code:
sending 'system' (1048572 KB)...
FAILED (remote: data length is too large)
finished. total time: 0.006s
After rebooting stock will come up