Hi,
I'm searching for the stock official firmware for my 6210 with stock recovery to be able to restore for service procedure.
If I flash some KiktKat rom, and I would like to restore the XXME2 (XEH) firmware - this is the latest firmware for my region Hungary - I just only can do, if I have this rom.
I have upgraded my device with KIES to this firmware from the stock HC3.2 firm, because only this firmware was released for Hungary.
Thanks in advance.
air001 said:
Hi,
I'm searching for the stock official firmware for my 6210 with stock recovery to be able to restore for service procedure.
If I flash some KiktKat rom, and I would like to restore the XXME2 (XEH) firmware - this is the latest firmware for my region Hungary - I just only can do, if I have this rom.
I have upgraded my device with KIES to this firmware from the stock HC3.2 firm, because only this firmware was released for Hungary.
Thanks in advance.
Click to expand...
Click to collapse
www.sammobile.com there is firmware for all sam devices u can also download this or
www.samsung-updates.com gl:good:
Thanks. I know both sites, but the ME2 (XEH) isn't available on none of them, unfortunatelly.
But if there is any way to get out the stock recovery from any firmware, it would be great.
Then I can make a nandroid backup from CWM, which I can restore if necessary then putting back the stock recovery.
I have the nordic firmware .93
But I use English as language on my phone. What would be the newest firmware to flash for me?
Are there any difference in the radio files? Witch should I choose? My bootloader is open...
Can i flash the .105 firmware or does this contain other stuff since it's Branded?
There is absolutely no difference between nordic and english version of firmware. The only differences you mightnotice are within the pre-installed apps. Radios should be exactly the same.
I wouldn't flash a branded firmware if I were you.
I have an SM-G920F with the newest UAE firmware dates Jan 7, 2016. It is OLO,OJ2,OLN. I am trying to ODIN TWRP and Odin shows successful, however, I can NOT boot into recovery after flashing? Did something change in this 5.1.1 release that I'm not aware of? My phone is Internation Unlocked version and came with UAE Firmware. I've loaded BTU, DDE, DTM firmware onto it with no problem and Odin'ed recovery no problems. However, on the newest UAE firmware, recovery will not stick and of course, kernel alone=bootloop. Any help would be greatly appreciated. Thx guys.
EDIT:Yes We Can Simply flash Firmware with ODIN
hi everyone
I've s6 g920fzkvia and currently no Nougat available for my cell.
I wana flash it with XSG firmware ..
In phone infon compatible csc are VIA,XEC
Can I flash XSG?
If yes, how?
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Gisar said:
Hello,
last days I flashed the new Oreo firmware for my SM-G930F, available now only for UK (BTU CSC code). I used the last odin version 3.13.1. When the firmware was flashed, after factory recet I received my old CSC code (XEO). I wrote in forums, that if I want to changthe default CSC I have to set in odin settings Repartition. So yesterday evening I decided to reflash the firmware, but now with ticked Repartiotion. When I cklicked on Start, afer one two seconds red Fail windows has been shown. Why I can't flash the firmware with set Repartition? Does somebody have an idea what went wrong?
Reasons why I want to change the CSC code by default from XEO to BTU is that BTU receives the updates at the earliest!
Click to expand...
Click to collapse
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
*Detection* said:
BTU contains XEU as it is Multi-CSC, you cannot switch between them directly
You need to flash a different region CSC not included in BTU first, then flash BTU
Click to expand...
Click to collapse
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Gisar said:
Which for example? Can I use one of the following: VOD or VDI? Both of them have available Oreo firmwares. Oherwise I have to downgrade to Nougat (by the way, how can I downgrade using odin?)
Click to expand...
Click to collapse
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
*Detection* said:
One with the same bootloader version as you are running, probably version 2
You can tell by this number in the firmware version
G930FXXU2ERD5
Have a look in download mode for B:2 or whatever number it says and match to the firmware
Downgrade the same way you upgrade, but use ODIN 3.12.7 for Nougat
Do not flash the VOD (vodafone) Oreo, it is bricking devices, very broken, only flash BTU Oreo
Click to expand...
Click to collapse
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Gisar said:
One moment, I want to switch from XEO (Poland) to BTU by defauld, not from XEU. Can you explain more deteiled haw to proceed (I am not so experienced)? Thanks in advance!!!
Click to expand...
Click to collapse
Exactly the same as XEO is also included in the BTU CSC
*Detection* said:
Exactly the same as XEO is also included in the BTU CSC[/QUOTE
What about flashing the same firmware with odin 3.13.1, but with ticked repartition in the option? This, regarding the comments in sammobile forum works. But for me doesn't. Maybe for Oreo it doesn't work or there is something specifically to do?
I can't catch your proposal for flashing the other firmware. Can you tell me which exactly firmware I have to flash first, later on to receive BTU Oreo CSC as default?
Click to expand...
Click to collapse
When I flash first MTL CSC android 7 and then flash oreo BTU, will it change my CSC code from XEO to BTU?