CM6 for Huawei U8120
This is an unofficial port of cm6 (froyo) for huawei u8120 (vodafone joy/845).
It may work on u8100/u8110 models but I dont know because I havent any of these devices.
I would like to make it clear that this is an unofficial cm6 port, it is not fully tested
and it has some bugs.Its still under development and NOT for daily use.Only for bug fixing/testing.
If all bugs get fixed we can try to make it official.I work also on a
cm7(gingerbread) port with quite a success so far, but it has more mayor bugs than cm6 port.I will create
the corresponding thread for cm7 port when it reaches a usable state.
Any help it would be great.Some of the bugs are common in froyo and cm7 port.So if
they are fixed on one port it may be fixed on the others to.
Kernel: kalt kaffe's 2.6.29
Jit enabled
Android : 2.2.1 / CM6.2
Working:
RIL
Audio - not so good volume states.Too low.
Bluetooth
Wifi
TSCalibration - use it with a pen/stick
Bugs/Not working:
Camera can take pictures.Still to fix : b/w preview and video record crashes on stop
SDCard mount via notification bar
Broken layout in dialer FIXED
Key lights FIXED
Missing AGPS
Missing FM
For any bugs you find please provide a logcat output if you can.
Build instructions on git.
Releases:
v.0.2 Fixed lights,use libloc api, add boot splash image
v.0.1. Initial Build
Im not responsible for any damage that this software may cause on your device.Dont expect support.
gapps
github
gonna test it and report any bug. thanks
i'm in finished with car gona test after work
Nice Any idea what wrong with camera?
bitye said:
Nice Any idea what wrong with camera?
Click to expand...
Click to collapse
The same reason as the other ports.I have built it without camera support
Actually I will get to the camera problem after the sdcard bug.I think that its more important.I may have fixed the key lights.Im going to test it later because now Im working.
What you know, Camera, SD Card mount on PC, and I found an other, phone can't recognize my SD when ext2 available on that. I formated to fat only now works. Dialer layout broken, wifi and Bluetooth OK, Calibration ok, dpad ok.
bitye said:
What you know, Camera, SD Card mount on PC, and I found an other, phone can't recognize my SD when ext2 available on that. I formated to fat only now works. Dialer layout broken, wifi and Bluetooth OK, Calibration ok, dpad ok.
Click to expand...
Click to collapse
How about the mac-adress?
And plz make the CM7 Treath fast so we can See you fixes and help you.
thx
I have no problem with audio volumes
Sensors not working
Can you upload cm7?
CM7 is not in a functional state right now so I will not make a thread/upload the configs.Also I'm sure that the're going to be roms based
on it as soon as possible
And I don't think that's right.
Please let me explain my opinion:
Take for example the cm6 port.
The cm6 port is not fully tested (I have run it for just a day or two and I haven't tested all the provided features).
So if cedric123 or bitye or any other guy, that is cooking roms (very good roms to be honest) ,
provide roms based on the cm6 port (as already have ) then we will have this situation:
+ the number of users/testers will grow (that's good because bugs and possible fixes are discovered more quickly)
- because of the already known bugs and the undocumented ones, many users, who have not the experience/knowledge
of the rom state and the whole procedure,will get disappointed and frustrated about cyanogenmod.So this is bad and
unfair for the cm team because they are doing an awesome job.
That's the reason I'm providing only img files and not a complete rom zip.To avoid unexperienced users
To make it clear that's just my opinion/point of view.
tas0s said:
CM7 is not in a functional state right now so I will not make a thread/upload the configs.Also I'm sure that the're going to be roms based
on it as soon as possible
And I don't think that's right.
Please let me explain my opinion:
Take for example the cm6 port.
The cm6 port is not fully tested (I have run it for just a day or two and I haven't tested all the provided features).
So if cedric123 or bitye or any other guy, that is cooking roms (very good roms to be honest) ,
provide roms based on the cm6 port (as already have ) then we will have this situation:
+ the number of users/testers will grow (that's good because bugs and possible fixes are discovered more quickly)
- because of the already known bugs and the undocumented ones, many users, who have not the experience/knowledge
of the rom state and the whole procedure,will get disappointed and frustrated about cyanogenmod.So this is bad and
unfair for the cm team because they are doing an awesome job.
That's the reason I'm providing only img files and not a complete rom zip.To avoid unexperienced users
To make it clear that's just my opinion/point of view.
Click to expand...
Click to collapse
Absolutely right. Besides: from a practical point of view, its will be easier to implement a CM7 port once a CM6 port has successfully tackled the quirks and required changes to adapt the code to the U81*.
CyanogenMod
Interesting: Tom Giordano has merged Huawei U8220/U8230 into the CM repository, which will eventually make it a officially supported device.
See: http://review.cyanogenmod.com/#change,3670
poruid said:
Interesting: Tom Giordano has merged Huawei U8220/U8230 into the CM repository, which will eventually make it a officially supported device.
See: http://review.cyanogenmod.com/#change,3670
Click to expand...
Click to collapse
To talk about the huawei 8220 device
this device is almost the same as ours........
so cant we use some of their drivers and libs to fix the camera and sd mount???
cedric123 said:
To talk about the huawei 8220 device
this device is almost the same as ours........
so cant we use some of their drivers and libs to fix the camera and sd mount???
Click to expand...
Click to collapse
I have looked in tomgiordano's device tree from the begining
We have different camera from the u8220 as I know.
Im working on camera and sdcard bug.Im looking in other device trees also to
see whats wrong.
tas0s said:
I have looked in tomgiordano's device tree from the begining
We have different camera from the u8220 as I know.
Im working on camera and sdcard bug.Im looking in other device trees also to
see whats wrong.
Click to expand...
Click to collapse
Nice please post your archievments and bug fixes and plx make a threath about cm7 cuz i want to know what you fixed so i can get to work too...
Seached a bit
HTC ledgend cm6 mod is running 2.6.29 kernel too and HAD a sd mount bug + camera bug.........
They fixed sd card bug by enabling USB-debugging(Just enable it and it will work????)
Camera i dont know how they fixed it..
Are you planning to fix Mac-adresss too?
i have still problems with sources my repo is not building right my ubuntu 64 is [email protected] up again and the git -u command is not working
cd <cm6 source>/device/
mkdir -p huawei/u8120
git init -u git://github.com/tas0s/cm_huawei_U8120.git ---- not working
cd huawei/u8120
git init
git pull git://github.com/tas0s/cm_huawei_U8120.git
git checkout
Code:
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/DisplayActivity.java:96: cannot find symbol
symbol : variable ELECTRON_BEAM_ANIMATION_ON
location: class android.provider.Settings.System
Settings.System.ELECTRON_BEAM_ANIMATION_ON, value ? 1 : 0);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/DisplayActivity.java:102: cannot find symbol
symbol : variable ELECTRON_BEAM_ANIMATION_OFF
location: class android.provider.Settings.System
Settings.System.ELECTRON_BEAM_ANIMATION_OFF, value ? 1 : 0);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/DisplayActivity.java:108: cannot find symbol
symbol : variable ACCELEROMETER_ROTATE_180
location: class android.provider.Settings.System
Settings.System.ACCELEROMETER_ROTATE_180, value ? 1 : 0);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/UIActivity.java:125: cannot find symbol
symbol : variable OVERSCROLL_EFFECT
location: class android.provider.Settings.System
Settings.System.OVERSCROLL_EFFECT, 1);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/UIActivity.java:196: cannot find symbol
symbol : variable OVERSCROLL_EFFECT
location: class android.provider.Settings.System
Settings.System.putInt(getContentResolver(), Settings.System.OVERSCROLL_EFFECT,
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
11 errors
make: *** [out/target/common/obj/APPS/CMParts_intermediates/classes-full-debug.jar] Error 41
make: *** Waiting for unfinished jobs....
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
java version "1.6.0_22"
Java(TM) SE Runtime Environment (build 1.6.0_22-b04)
Java HotSpot(TM) Server VM (build 17.1-b03, mixed mode)
Would CM5.0.8 eclair be faster than our eclair ROM now??
anryl said:
i have still problems with sources my repo is not building right my ubuntu 64 is [email protected] up again and the git -u command is not working
cd <cm6 source>/device/
mkdir -p huawei/u8120
git init -u git://github.com/tas0s/cm_huawei_U8120.git ---- not working
cd huawei/u8120
git init
git pull git://github.com/tas0s/cm_huawei_U8120.git
git checkout
Code:
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/DisplayActivity.java:96: cannot find symbol
symbol : variable ELECTRON_BEAM_ANIMATION_ON
location: class android.provider.Settings.System
Settings.System.ELECTRON_BEAM_ANIMATION_ON, value ? 1 : 0);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/DisplayActivity.java:102: cannot find symbol
symbol : variable ELECTRON_BEAM_ANIMATION_OFF
location: class android.provider.Settings.System
Settings.System.ELECTRON_BEAM_ANIMATION_OFF, value ? 1 : 0);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/DisplayActivity.java:108: cannot find symbol
symbol : variable ACCELEROMETER_ROTATE_180
location: class android.provider.Settings.System
Settings.System.ACCELEROMETER_ROTATE_180, value ? 1 : 0);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/UIActivity.java:125: cannot find symbol
symbol : variable OVERSCROLL_EFFECT
location: class android.provider.Settings.System
Settings.System.OVERSCROLL_EFFECT, 1);
^
packages/apps/CMParts/src/com/cyanogenmod/cmparts/activities/UIActivity.java:196: cannot find symbol
symbol : variable OVERSCROLL_EFFECT
location: class android.provider.Settings.System
Settings.System.putInt(getContentResolver(), Settings.System.OVERSCROLL_EFFECT,
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
11 errors
make: *** [out/target/common/obj/APPS/CMParts_intermediates/classes-full-debug.jar] Error 41
make: *** Waiting for unfinished jobs....
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
java version "1.6.0_22"
Java(TM) SE Runtime Environment (build 1.6.0_22-b04)
Java HotSpot(TM) Server VM (build 17.1-b03, mixed mode)
Click to expand...
Click to collapse
Sorry anryl you are right.
Try
git clone git://github.com/tas0s/cm_huawei_U8120.git
EDIT: maybe the pull/checkout procedure is more correct.Updated
For the compilation error just do
cd packages/apps/CMParts && git checkout 69613a248519fed7d971bd6292013d36097d0107
Something is missing in CMParts master
I have updated the README in github with the corrections.Thanx
tas0s said:
Sorry anryl you are right.
Try
git clone git://github.com/tas0s/cm_huawei_U8120.git
EDIT: maybe the pull/checkout procedure is more correct.Updated
For the compilation error just do
cd packages/apps/CMParts && git checkout 69613a248519fed7d971bd6292013d36097d0107
Something is missing in CMParts master
I have updated the README in github with the corrections.Thanx
Click to expand...
Click to collapse
ok it worked so gona start test.ing
EDIT nice first try no rill used boot.img from AOSP
updated ramdisk lets see ---- ok RILL FINE
removed partitions on sdcard left with fat32 only
restoring apps with titanium
calibration ok
gps working
QtADB WORKING fine
for starters AOK thnx
cedric123 said:
Nice please post your archievments and bug fixes and plx make a threath about cm7 cuz i want to know what you fixed so i can get to work too...
Seached a bit
HTC ledgend cm6 mod is running 2.6.29 kernel too and HAD a sd mount bug + camera bug.........
They fixed sd card bug by enabling USB-debugging(Just enable it and it will work????)
Camera i dont know how they fixed it..
Are you planning to fix Mac-adresss too?
Click to expand...
Click to collapse
I have no MAC problems, please explain what's wrong with yours. (Maybe special for me)
USB Debugging not fix the problem here, I tested.
i am trying to compile 2.6.32.9 kernel . but when i do " make " after a while it cames with an error like this
"mm/page-writeback.c: in function 'write_cache_pages':
"mm/page-writeback.c:820: internal compiler error : segmentation fault"
i can't find mistake on that line , and google is not giving me the answer i am looking for .
if anybody knows something , plz help me
facing same error
compiling galaxy s I9000 kernel from sources "/GT-I9000_OpenSource_Froyo_update2"
Cross compiler used: export PATH=$PATH:/home/xx/bin/u/android-ndk-r5/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin
please correct me if something is wrong
I'm getting this build error when trying to compile CM-11.0. When this error occurs, I can try compiling again (brunch hammerhead) and the error will go away but pop up in another section as you can see in the pastebin. I've setup another directory where I re-synced the stock cm-11.0 repo and was able to complete the build. Upon installing the phone failed to boot, so I'm not sure what happened there (I think it was my proprietary files). The only changes I've made to the stock cm version are I've forked frameworks_base, apps_Settings, and the android manifest. I've been able to compile with the forks in the past, but when I forked the android manifest that's when this error started popping up.
Windows 8.1
VMWare : Ubuntu 13.10
Java : Initially was using Oracle version 7 but switched to openjdk 6 to try and troubleshoot
http://pastebin.com/rcPuGnXT
Solved: I've solved this issue but don't know why it was occurring in the first place. It was due to my lack of understanding of repo and git. When I was fetching and and merging the upstream changes, I wasn't committing and pushing those back to my forked repo. Once I did that everything went back to normal.
Well guys i started working on Roms For the galaxysmtd i was compling normaly after an hour i got that error (Luckywise i didnt go to sleep haha)
Code:
make: *** No rule to make target '/home/dos-developers/android/omni/out/target/product/galaxysmtd/obj/SHARED_LIBRARIES/libpac_intermediates/export_includes', needed by '/home/dos-developers/android/omni/out/target/product/galaxysmtd/obj/SHARED_LIBRARIES/libjni_pacprocessor_intermediates/import_includes'. Schluss.
I synced the OmniROM sources freshly ....... Need Help thanks
hi,
this is my attempt to bring Cyanogen 13 to the Samsung Galaxy SL ( i9003 ).
So far i got the kernel/device/vendor repos synced and edited.
I still haven't manage to pass the "brunch galaxysl" command
first error was:
hardware/ti/wlan/mac80211/wpa_supplicant_lib/Android.mk:19: external/wpa_supplicant_8_ti/wpa_supplicant/android.config: No such file or directory
fixed by editing BoardConfing.mk ( not sure it will allow the wi-fi to work after this )
last error is :
make: *** No rule to make target '/home/nots/cm13/out/target/product/galaxysl/utilities/flash_image', needed by '/home/nots/cm13/out/target/product/galaxysl/bootstrap.cpio.gz'. Stop.
If anyone want to help, you are more than welcome
thanks to dhiru1602 and rodero95 for there previous work on this phone
mkdir out/target/product/galaxysl/utilities
copy busybox erase_image flash_image make_ext4fs to the dir created
busybox erase_image flash_image make_ext4fs are from ROM pack
notsgnik said:
hi,
this is my attempt to bring Cyanogen 13 to the Samsung Galaxy SL ( i9003 ).
So far i got the kernel/device/vendor repos synced and edited.
I still haven't manage to pass the "brunch galaxysl" command
first error was:
hardware/ti/wlan/mac80211/wpa_supplicant_lib/Android.mk:19: external/wpa_supplicant_8_ti/wpa_supplicant/android.config: No such file or directory
fixed by editing BoardConfing.mk ( not sure it will allow the wi-fi to work after this )
last error is :
make: *** No rule to make target '/home/nots/cm13/out/target/product/galaxysl/utilities/flash_image', needed by '/home/nots/cm13/out/target/product/galaxysl/bootstrap.cpio.gz'. Stop.
If anyone want to help, you are more than welcome
thanks to dhiru1602 and rodero95 for there previous work on this phone
Click to expand...
Click to collapse
Yeah I've actually followed quite some hack arounds for the device...... You'll need patches for the following repos (Unfortunately no longer in Nameless Gerrit. I'll try to upload them):
device/samsung/galaxysl
kernel/samsung/latona
hardware/ti/omap3
hardware/samsung
frameworks/av
bionic
I guess that's all that I've patched. And one more word of advice: CyanogenMod dropped support for the S2 so it'll never compile for the SL. It's better to download NamelessROM's source (check repo's --reference flag to speed up the download) because it has some support.
Cheers!
Technohacker
Technohacker1995 said:
Yeah I've actually followed quite some hack arounds for the device...... You'll need patches for the following repos (Unfortunately no longer in Nameless Gerrit. I'll try to upload them):
device/samsung/galaxysl
kernel/samsung/latona
hardware/ti/omap3
hardware/samsung
frameworks/av
bionic
I guess that's all that I've patched. And one more word of advice: CyanogenMod dropped support for the S2 so it'll never compile for the SL. It's better to download NamelessROM's source (check repo's --reference flag to speed up the download) because it has some support.
Cheers!
Technohacker
Click to expand...
Click to collapse
plz give us link for download and install rom
mehran200067 said:
plz give us link for download and install rom
Click to expand...
Click to collapse
For which version? I've compiled 5.0 (here: http://forum.xda-developers.com/gal...ake-android-5-0-lollipop-i9003-t2928989/page6 I've posted some fixes in subsequent posts so read all of 'em), 5.1's not available (doesn't boot...... idk why) whereas we're trying to port 6
Cheers!
Technohacker