Related
is possible for you to put in only one topic All the best reg key adjustement?
i'm a newbie but i would learn quikly..
many thx!
Try to use usenet instead of this forum. It's a little bit illegal
I think Bubu try to search Registry key and not Registration key :wink:
You are right. I'm sorry
In that case:
Dunno if you've all seen this before but you can speed up your JAM by doing the following:
1) Go to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE
2) Change the value of 'limit' from 8192 to 32768
3) Soft reset.
this was posted at: http://www.ppcsg.com/index.php?showtopic=45733
I did it to my JAM...no problems so far. Does seem to be a tad faster in loading apps...remember to backup before messing with Registry values!
Click to expand...
Click to collapse
Manual at every sms:
Tooltje download: TRE Registry Editor
To start up --> HKEY_CURRENT_USER/Software/Microsoft/Inbox/Setting
(care that those are open)
New - > DWORD
name: SMSDeliveryNotify
value: 1
(Should you nothing see because your keyboard in the way sits, simply blind "SMSDeliveryNotify" type (without quotations mark with
head and small characters) followed by grapple, the value comes afterwards, however, click him 1x (select) and click then on edit - > modify - > "1"
indicate value)
sounds more with difficulty than it is...
Click to expand...
Click to collapse
The last quote is from a translate site. (Dutch --> English). Maybe you can use them eiher. It's works prette good @ me
Take a look at this thread:
http://forum.xda-developers.com/viewtopic.php?t=20119
Because people asked and didn't find the threat on MoDaCo, a small tutorial here. The example is from my Slide Panther theme, there is another one in make.zip. You have to write an *.inf for each cab you want to create. I t contains all files from a specific location and where they will be copied to. You can also specify reg keys.
[Version]
Signature = "$Windows NT$" <-- no changes needed
CESignature = "$Windows CE$" <-- no changes needed
Provider = "frauhottelmann" <-- change to your name
[CEStrings]
Appname="slide panther" <-- the name that will be displayed in the programs menu in settings
[CEDevice] <-- you don't have to change this for the vox
ProcessorType=0
VersionMin=5.2
VersionMax=6.0
[SourceDisksNames]
1=,"Source1",,"Home" <-- specify the name of your source and then the folder with your files (should be in the same location of the *.ini)
[SourceDisksFiles] <-- All files you want to copy have to be here. The 1 stands for Source1 mentioned above, if you have more than one sources (folders) you have to add it above and add an = 2 ... to the end of the corresponding files!
"Slide Panther.home.xml"= 1
"panther.jpg" = 1
"pantherlc.jpg" = 1
[CopyFiles1] <-- Here you have to list the files for one destination folder on the phone. More than one destiantion means more [CopyFiles2] etc.
"Slide Panther.home.xml"
"panther.jpg"
"pantherlc.jpg"
[DestinationDirs] <-- Specify the destinations for the above
CopyFiles1=0,"\Application Data\Home"
[RegData] <-- add reg data, the following is for string values, I don't know how to add dwords, but I never needed it!
HKCU,ControlPanel\Home,Scheme,,\Application Data\Home\Slide Panther.home.xml
[DefaultInstall] <-- Finally specify what you want to be installed, here every destination dir and reg data should be included
CopyFiles=CopyFiles1
AddReg=RegData
Click to expand...
Click to collapse
Once your done with your *.inf, just drag'n'drop it onto the cabwiz.exe and it'll make a cab with the same name as the *.inf! Now you can install it!
Or the alternative, use this program!
BIIIIIIIIIIIIG thx to the german guy ;D
but don't we have to change the versionmax to 6.1 or we will get this stupid "this prog may not display correctly" message??
No, this is the version of WinCE not Windows Mobile, which is still at 5.2...!
Can this be used to install changes to the registry that will be lost after a hard reset?
Roland
Yes everything you install with a cab is lost after hard reset
Nice work...as always...
/**still waiting for german emulator image......same here for italian's one. **/
could you please be a bit more precise about those regkeys? what are all these commas? what are the folder, keys, values?
HKCU,ControlPanel\Home,Scheme,,\Application Data\Home\Slide Panther.home.xml
Click to expand...
Click to collapse
HKCU = HKEY_CURRENT_USER
then after the comma the "folder" path, after the next comma the key name
then after the next comma comes the reg key type, so none is for a string, for others you have to search, because I don't know them. And finally after the last comma comes the value of the reg key!
funny thing, now that i was looking for th value-types i found the tutorial on modaco.
http://www.modaco.com/content/Smart...iscussion/235885/Tutorial-Creating-Cab-Files/
and here are the flags for diferrent types of registry entries:
[add_registry_section]
registry_root_string , subkey,[value_name], flags, value[,value]
[registry_root_string, subkey,[value_name], flags, value[,value]]
registry_root_strings
String that specifies the registry root location. The following table shows the values that are supported by Windows CE.
Root string Description
HKCR The same as HKEY_CLASSES_ROOT
HKCU The same as HKEY_CURRENT_USER
HKLM The same as HKEY_LOCAL_MACHINE
value_name
Registry value name. If empty, the "(default)" registry value name is used.
flags
Numeric value that specifies information about the registry key. The following table shows the values that are supported by Window CE.
Flag Value Description
FLG_ADDREG_NOCLOBBER 0x00000002 If the registry key exists, do not overwrite it. This flag can be used in combination with any of the other flags in this table.
FLG_ADDREG_TYPE_SZ 0x00000000 The REG_SZ registry data type.
FLG_ADDREG_TYPE_MULTI_SZ 0x00010000 The REG_MULTI_SZ registry data type. The value field that follows can be a list of strings separated by commas.
FLG_ADDREG_TYPE_BINARY 0x00000001 The REG_BINARY registry data type. The value field that follows must be a list of numeric values separated by commas, one byte per field, and must not use the 0x hexadecimal prefix.
FLG_ADDREG_TYPE_DWORD 0x00010001 The REG_DWORD data type. Only the non-compatible format in the Win32 Setup .inf documentation is supported.
The following code example shows a typical [AddReg] section.
AddReg = RegSettings.All
[RegSettings.All]
HKLM,%reg_path%,,0x00000000,alpha ; <default> = "alpha"
got it from here http://www.sundialsoft.freeserve.co.uk/cabinfo.htm
could it be that we need to make a .inF (as it says in the instructions) file and not a .inI file?
Is it possible to delete registry entries??
Yes it's inf sorry. And I am not aware of a way to delete reg key with cabs!
Hi frauhottelmann,
It is realy great starting point for CAB maker. I will use this instructions for making my Sliding Panel Default Green cab for 6.1 ver 1.1 ROM.
I have found something really great for cab makers: http://www.gpcarreon.com/?p=524
Haven't tried it though!
EDIT: Under Vista it does, unfortunately, not work!
It DOES work, in compatibility mode!
I've made this modification for version 6 of tomtom and now I'm trying to do the same with version 7. The modification works as well, but I haven't found a really full list of version 7 tasks, in particular I can't found the task for the new help button, for the map modification menu and for the popup menu.
Anyone knows these task strings?
would like to know these to, tried some combinations in the mnu file, but they didn't seem to work. seems there is no SDK anymore for v7.
follo said:
I've made this modification for version 6 of tomtom and now I'm trying to do the same with version 7. The modification works as well, but I haven't found a really full list of version 7 tasks, in particular I can't found the task for the new help button, for the map modification menu and for the popup menu.
Anyone knows these task strings?
Click to expand...
Click to collapse
Any word on this?
Peter
Sorry to bring up an ageing thread...
...but I had the same question, but couldn't find an answer, so I've pulled this list out of my TT7 executable:
BTM_GPS_POSITION
BTM_DONE
BTM_TRAFFIC_INFO
BTM_CAM_INFO
TASK_MENU_PREFERENCES
TASK_SWITCH_ASN
TASK_SET_VOICE
TASK_SET_LANGUAGE
TASK_SET_DIST_UNITS
TASK_SET_CLOCK_TYPE
TASK_SET_GEO
TASK_SWITCH_TIPS
TASK_SET_VOLUME
TASK_SWITCH_SOUND
TASK_SHOW_STATUS
TASK_SHOW_GPS_STATUS
TASK_SET_BRIGHTNESS
TASK_SET_BACKLIGHT
TASK_RESET_SETTINGS
TASK_SWITCH_BLUETOOTH
TASK_SWITCH_CLOCK
TASK_LEFTHANDED
TASK_ROTATE_DISPLAY
TASK_SET_KEYBOARD_SIZE
TASK_SET_KEYBOARD_TYPE
TASK_SET_PROMPT
TASK_SET_COMPASS
TASK_SET_STATUS
TASK_SWITCH_NIGHTVIEW
TASK_SET_COLOR_SCHEMES
TASK_SET_DAY_COLOR_SCHEME
TASK_SET_NIGHT_COLOR_SCHEME
TASK_CHANGE_HOME_LOCATION
TASK_MAINTAIN_FAVORITES
TASK_ADD_FAVORITE
TASK_SET_SAFETY_SPEED
TASK_SWITCH_2D3D
TASK_SET_MAP
TASK_DELETE_MAP
TASK_SHOW_MAP
TASK_SET_HIDEMAP
TASK_SWITCH_POI
TASK_CONFIGURE_POI
TASK_MAINTAIN_POI
TASK_MENU_RECALC_BLOCK
TASK_AVOID_ROUTE_LINE
TASK_PLAN_VIA
TASK_MENU_FIND_ALTERNATIVES
TASK_ASK_CHANGE_OWNER
TASK_MENU_TRAFFIC
TASK_TRAFFIC_SETTINGS
TASK_TRAFFIC_ENABLE
TASK_TRAFFIC_UPDATE
TASK_TRAFFIC_REPLAN
TASK_TRAFFIC_VIEW
TASK_TRAFFIC_EXPLAIN
TASK_RDSTMC_SELECT_COUNTRY
TASK_NAVIGATE_TO
TASK_MENU_PLAN_ATOB
TASK_DELETE_ROUTE
TASK_CONFIRM_DELETE_ROUTE
TASK_SET_TOLL
TASK_SET_PLANTYPE
TASK_SET_CRADLE
TASK_SHOW_ROUTE_DEMO
TASK_MENU_ROUTE_INSTRUCTIONS
TASK_SHOW_ROUTE_INSTRUCTIONS
TASK_STEP_ROUTE_INSTRUCTIONS
TASK_ABOUT
TASK_ITINERARY
TASK_TUTORIAL
TASK_EXIT_APP
TASK_SET_NAME_DISPLAY
TASK_SHOW_WEATHER
TASK_MANAGE_MAPS
TASK_MENU_DOWNLOAD
TASK_DOWNLOAD_MAP
TASK_DOWNLOAD_POI
TASK_DOWNLOAD_VOICE
TASK_DOWNLOAD_SCHEME
TASK_DOWNLOAD_VERSION_NUMBER
TASK_SERVICE_LOGIN
TASK_HELP_GENERAL
TASK_HELP_MAINMENU
TASK_HELP_MAPBROWSER
TASK_HELP_ZOOMING
TASK_HELP_TRAFFIC
TASK_HELP_ITINERARY
TASK_HELP_PLANNING
TASK_MENU_PHONE
TASK_PAIR_WITH_PHONE
TASK_DIAL_POI
BLOCK_MAIN
BLOCK_PREF
BLOCK_CURSOR
TASK_SDK
TASK_PAGE
TASK_BUDDIES
TASK_DOC_BROWSER
TASK_IMAGE_BROWSER
TASK_IPOD
TASK_JUKEBOX
TASK_MULTIMEDIA
TASK_PLAN_TO_MAPLOC
TASK_NEARBY_POICAT
TASK_CENTER_ON_MAP
TASK_DO_ADD_FAVOURITE
TASK_CURSOR_INTO_POI
TASK_TRAVEL_VIA
I don't know whether they all work, or do anything, but that's the list that I found.
Cheers,
Steve.
for reference: nice list with a lot of info on TomTom.mnu file can be found in this wiki: http://www.opentom.org/Menu_structur
Menu structurFrom OpenTom
Jump to: navigation, search
Contents
* 1 Abou * 2 Starting with the default menu
* 3 Additional Options
* 4 Exampl * 5 Available options
o 5.1 Buttons
o 5.2 Tasks
o 5.3 Applications
o 5.4 Previous Page Button
o 5.5 Keywords
* 6 Menu Blocks
* 7 Additional notes
* 8 Look here too
* 9 Table of Tasks (With Images)
Abou
Ever wanted to reorganise your Tom Tom Go's menus? Want that special option on the first screen not 3 clicks in? Well you can.
Starting with the default menu
First of all you need to create a folder called:
SDKRegistry
in the root of your TomTom system's SD card or
/TomTom/SDKRegistry
in the first level (the root) of your PDA system.
Within that folder create a file called:
TomTom.mnu
Both the folder and the file names are case sensitive. Now paste the following into the file and save 1- Main menu block
MENUBLOCK|BLOCK_MAIN|BTM_GPS_POSITION|
MENUPAGE|TASK_PAGE1|Main Menu 1 of 3|
MENUITEM|TASK_NAVIGATE_TO|
MENUITEM|TASK_MENU_FIND_ALTERNATIVES|
MENUITEM|TASK_DELETE_ROUTE|
MENUITEM|TASK_ADD_FAVORITE|
MENUITEM|TASK_MENU_PREFERENCES|
MENUITEM|TASK_PAGE2|
MENUPAGE|TASK_PAGE2|Main Menu 2 of 3|
MENUITEM|TASK_MENU_PLAN_ATOB|
MENUITEM|TASK_SHOW_MAP|
MENUITEM|TASK_MENU_ROUTE_INSTRUCTIONS|
MENUITEM|TASK_MENU_PHONE|
MENUITEM|TASK_ITINERARY|
MENUITEM|TASK_PAGE3|
MENUPAGE|TASK_PAGE3|Main Menu 3 of 3|
MENUITEM|TASK_SHOW_WEATHER|
MENUITEM|TASK_MENU_DOWNLOAD|
MENUITEM|TASK_MENU_TRAFFIC|
MENUITEM|TASK_TUTORIAL|
MENUITEM|TASK_SHOW_GPS_STATUS|
MENUITEM|TASK_PAGE1|
If you would like to customize preferences menus, add the following at the end of previous fil
2- Preferences menu block
MENUBLOCK|BLOCK_PREF|BTM_GPS_POSITION|
MENUPAGE|TASK_PAGE4|Préférences 1/6|
MENUITEM|TASK_SWITCH_NIGHTVIEW|
MENUITEM|TASK_SWITCH_2D3D|
MENUITEM|TASK_SET_HIDEMAP|
MENUITEM|TASK_SWITCH_POI|
MENUITEM|TASK_SWITCH_SOUND|
MENUITEM|TASK_PAGE5|
MENUPAGE|TASK_PAGE5|Préférences 2/6|
MENUITEM|TASK_SET_VOLUME|
MENUITEM|TASK_MAINTAIN_FAVORITES|
MENUITEM|TASK_CHANGE_HOME_LOCATION|
MENUITEM|TASK_MANAGE_MAPS|
MENUITEM|TASK_MAINTAIN_POI|
MENUITEM|TASK_PAGE6|
MENUPAGE|TASK_PAGE6|Préférences 3/6|
MENUITEM|TASK_SET_STATUS|
MENUITEM|TASK_SET_CLOCK_TYPE|
MENUITEM|TASK_ROTATE_DISPLAY|
MENUITEM|TASK_SET_COLOR_SCHEMES|
MENUITEM|TASK_SET_BRIGHTNESS|
MENUITEM|TASK_PAGE7|
MENUPAGE|TASK_PAGE7|Préférences 4/6|
MENUITEM|TASK_SET_PLANTYPE|
MENUITEM|TASK_SET_TOLL|
MENUITEM|TASK_SET_COMPASS|
MENUITEM|TASK_SET_VOICE|
MENUITEM|TASK_SET_LANGUAGE|
MENUITEM|TASK_PAGE8|
MENUPAGE|TASK_PAGE8|Préférences 5/6|
MENUITEM|TASK_SET_DIST_UNITS|
MENUITEM|TASK_LEFTHANDED|
MENUITEM|TASK_SET_KEYBOARD_SIZE|
MENUITEM|TASK_SET_NAME_DISPLAY|
MENUITEM|TASK_SWITCH_TIPS|
MENUITEM|TASK_PAGE9|
MENUPAGE|TASK_PAGE9|Préférences 6/6|
MENUITEM|TASK_SWITCH_BLUETOOTH|
MENUITEM|TASK_ABOUT|
MENUITEM|TASK_SET_CRADLE|
MENUITEM|TASK_SWITCH_ASN|
MENUITEM|TASK_RESET_SETTINGS|
MENUITEM|TASK_PAGE4|
This will exactly replicate the existing main menu pages and structure (only GO 300), and the preferences menu pages (all GO). Pages start with the command MENUPAGE, individual menu items start with MENUITEM.
Additional Options
In addition to the basic menu items, you can also change the icon and text for each item. The following should illustrate how this is done:
MENUITEM|MENUCOMMAND|"ICONFILE"|"TEXT DESCRIPTION"|
As an example,
MENUITEM|TASK_NAVIGATE_TO|"myicon.bmp"|"Travel!"|
will replace the Navigate to icon and the text underneath will be Travel!
(Bitmap option doesn't work with app-versions prior to 5.202)
Exampl
Let's look at the text you just pasted into tomtom.mnu, change the lin
MENUITEM|TASK_ADD_FAVORITE|
to
MENUITEM|TASK_SET_MAP|
and save the file. Once your Go restarts you'll notice that the "Add Favourite" option on the first page (when you press the centre of the screen) has changed to "Switch Map". Below is a list of the available options:
Available options
Buttons
BTM_GPS_POSITION
BTM_DONBTM_CAM_INFO
Tasks
TASK_NONTASK_EMPTY
TASK_MENU_PREFERENCES <- this item call automatically block_pref menu block (see example).
TASK_SWITCH_ASN
TASK_SET_VOICTASK_SET_LANGUAGTASK_SET_DIST_UNITS
TASK_SET_CLOCK_TYPTASK_SET_GEO (1)
TASK_SWITCH_TIPS
TASK_SET_VOLUMTASK_SWITCH_SOUNTASK_SHOW_STATUS
TASK_SHOW_GPS_STATUS
TASK_SET_BRIGHTNESS
TASK_SET_BACKLIGHT (2)
TASK_RESET_SETTINGS
TASK_SWITCH_BLUETOOTH
TASK_SWITCH_CLOCK (1)
TASK_LEFTHANDETASK_ROTATE_DISPLAY
TASK_SET_KEYBOARD_SIZE <- if you use this, keyboard_type is automatically used after.
TASK_SET_KEYBOARD_TYPTASK_SET_PROMPT (2)
TASK_SET_COMPASS
TASK_SET_STATUS
TASK_SWITCH_NIGHTVIEW
TASK_SET_COLOR_SCHEMES
TASK_SET_DAY_COLOR_SCHEMTASK_SET_NIGHT_COLOR_SCHEMTASK_CHANGE_HOME_LOCATION
TASK_MAINTAIN_FAVORITES
TASK_ADD_FAVORITTASK_SET_SAFETY_SPEED (1)
TASK_SWITCH_2D3TASK_SET_MAP
TASK_DELETE_MAP
TASK_SHOW_MAP
TASK_SET_HIDEMAP
TASK_SWITCH_POTASK_CONFIGURE_POTASK_MAINTAIN_POTASK_MENU_RECALC_BLOCK
TASK_AVOID_ROUTE_LINTASK_PLAN_VIA
TASK_MENU_FIND_ALTERNATIVES
TASK_ASK_CHANGE_OWNER (1)
TASK_MENU_TRAFFIC
TASK_TRAFFIC_SETTINGS
TASK_TRAFFIC_ENABLTASK_TRAFFIC_UPDATTASK_TRAFFIC_REPLAN
TASK_TRAFFIC_VIEW
TASK_TRAFFIC_EXPLAIN
TASK_NAVIGATE_TO
TASK_MENU_PLAN_ATOB
TASK_DELETE_ROUTTASK_CONFIRM_DELETE_ROUTTASK_SET_TOLL
TASK_SET_PLANTYPTASK_SET_CRADLTASK_SHOW_ROUTE_DEMO
TASK_MENU_ROUTE_INSTRUCTIONS
TASK_SHOW_ROUTE_INSTRUCTIONS
TASK_STEP_ROUTE_INSTRUCTIONS
TASK_ABOUTASK_ITINERARY
TASK_TUTORIAL
TASK_EXIT_APP
TASK_SET_NAME_DISPLAY
TASK_SHOW_WEATHER
TASK_MANAGE_MAPS
TASK_MENU_DOWNLOATASK_DOWNLOAD_MAP
TASK_DOWNLOAD_POTASK_DOWNLOAD_VOICTASK_DOWNLOAD_SCHEMTASK_DOWNLOAD_VERSION_NUMBER
TASK_SERVICE_LOGIN (2)
TASK_HELP_GENERAL
TASK_HELP_MAINMENU
TASK_HELP_MAPBROWSER
TASK_HELP_ZOOMING
TASK_HELP_TRAFFIC
TASK_HELP_ITINERARY
TASK_HELP_PLANNING
TASK_MENU_PHONTASK_PAIR_WITH_PHONE (1)
TASK_DIAL_POBLOCK_MAIN
BLOCK_PREF
TASK_SDK (or TASK_SDK see below)
TASK_PAGE (better: TASK_PAGE)
TASK_PHONE_MENU
Following items obtained on a GO 910, may apply to other models
TASK_BUDDIES
TASK_DOC_BROWSER
TASK_IMAGE_BROWSER
TASK_IPOTASK_JUKEBOX
TASK_MULTIMEDIA
TASK_PLAN_TO_MAPLOC
TASK_NEARBY_POICATASK_CENTER_ON_MAP
TASK_DO_ADD_FAVOURITTASK_CURSOR_INTO_POTASK_TRAVEL_VIA
Following Items are found on a TomTom ONE V3
TASK_RDSTMC_SELECT_COUNTRY
The following Items are recognized by the 8.010 firmware of a TomTom ONE XL
TASK_ABOUTASK_ADD_FAVORITTASK_ASK_CHANGE_OWNER
TASK_AVOID_ROUTE_LINTASK_BUDDIES
TASK_CENTER_ON_MAP
TASK_CHANGE_HOME_LOCATION
TASK_CONFIGURE_POTASK_CONFIRM_DELETE_ROUTTASK_CURSOR_INTO_POTASK_DELETE_MAP
TASK_DELETE_ROUTTASK_DIAL_POTASK_DOC_BROWSER
TASK_DOWNLOAD_MAP
TASK_DOWNLOAD_POTASK_DOWNLOAD_SCHEMTASK_DOWNLOAD_VERSION_NUMBER
TASK_DOWNLOAD_VOICTASK_DO_ADD_FAVOURITTASK_EMPTY
TASK_EXIT_APP
TASK_HELP_GENERAL
TASK_HELP_ITINERARY
TASK_HELP_MAINMENU
TASK_HELP_MAPBROWSER
TASK_HELP_PLANNING
TASK_HELP_TRAFFIC
TASK_HELP_ZOOMING
TASK_IMAGE_BROWSER
TASK_IPOTASK_ITINERARY
TASK_JUKEBOX
TASK_LEFTHANDETASK_MAINTAIN_FAVORITES
TASK_MAINTAIN_POTASK_MANAGE_MAPS
TASK_MENU_DOWNLOATASK_MENU_FIND_ALTERNATIVES
TASK_MENU_PHONTASK_MENU_PLAN_ATOB
TASK_MENU_PREFERENCES
TASK_MENU_RECALC_BLOCK
TASK_MENU_ROUTE_INSTRUCTIONS
TASK_MENU_TRAFFIC
TASK_MULTIMEDIA
TASK_NAVIGATE_TO
TASK_NEARBY_POICATASK_NONTASK_PAGTASK_PAIR_WITH_PHONTASK_PLAN_TO_MAPLOC
TASK_PLAN_VIA
TASK_RDSTMC_SELECT_COUNTRY
TASK_RESET_SETTINGS
TASK_ROTATE_DISPLAY
TASK_SDK1
TASK_SDK2
TASK_SDK3
TASK_SDK4
TASK_SDK5
TASK_SDK6
TASK_SDK7
TASK_SDK8
TASK_SDK9
TASK_SERVICE_LOGIN
TASK_SET_BACKLIGHTASK_SET_BRIGHTNESS
TASK_SET_CLOCK_TYPTASK_SET_COLOR_SCHEMES
TASK_SET_COMPASS
TASK_SET_CRADLTASK_SET_DAY_COLOR_SCHEMTASK_SET_DIST_UNITS
TASK_SET_GEO
TASK_SET_HIDEMAP
TASK_SET_KEYBOARD_SIZTASK_SET_KEYBOARD_TYPTASK_SET_LANGUAGTASK_SET_MAP
TASK_SET_NAME_DISPLAY
TASK_SET_NIGHT_COLOR_SCHEMTASK_SET_PLANTYPTASK_SET_PROMPTASK_SET_SAFETY_SPEETASK_SET_STATUS
TASK_SET_TOLL
TASK_SET_VOICTASK_SET_VOLUMTASK_SHOW_GPS_STATUS
TASK_SHOW_MAP
TASK_SHOW_ROUTE_DEMO
TASK_SHOW_ROUTE_INSTRUCTIONS
TASK_SHOW_STATUS
TASK_SHOW_WEATHER
TASK_STEP_ROUTE_INSTRUCTIONS
TASK_SWITCH_2D3TASK_SWITCH_ASN
TASK_SWITCH_BLUETOOTH
TASK_SWITCH_CLOCK
TASK_SWITCH_NIGHTVIEW
TASK_SWITCH_POTASK_SWITCH_SOUNTASK_SWITCH_TIPS
TASK_TRAFFIC_ENABLTASK_TRAFFIC_EXPLAIN
TASK_TRAFFIC_REPLAN
TASK_TRAFFIC_SETTINGS
TASK_TRAFFIC_UPDATTASK_TRAFFIC_VIEW
TASK_TRAVEL_VIA
TASK_TUTORIAL
Applications
There are 9 TASKs for 9 plugin applications:
TASK_SDK1
...
TASK_SDK9
Previous Page Button
MENUITEM|TASK_PAGE1|"back.bmp"|"go back"
You can place a file back.bmp in SDKRegistry.
Keywords
MENUBLOCK
MENUPAGMENUITEM
COMMANGEONAM
1) not visible on screen. 2) usefull item and not used by default.
Menu Blocks
There are three types of menu block,
BLOCK_MAIN
BLOCK_PREF
BLOCK_CURSOR
The BLOCK_MAIN deals with the main menu pages, the BLOCK_PREF deals with the options that appear in the Change Preferences pages. To make changes to the BLOCK_PREF add a line to the bottom of your .mnu file. BLOCK_CURSOR describes a block of pages which may be displayed in the context of a chosen map location. At least the following tasks are applicable: TASK_PLAN_TO_MAPLOC, TASK_NEARBY_POICAT, TASK_CENTER_ON_MAP, TASK_DO_ADD_FAVOURITE, TASK_CURSOR_INTO_POI, TASK_TRAVEL_VIA.
Look at the original menu structure, in the first block menu (BLOCK_MAIN) , MENUITEM|TASK_MENU_PREFERENCES| item call MENUBLOCK|BLOCK_PREF|BTM_GPS_POSITION| (the second block menu).
MENUBLOCK|BLOCK_PREF|BTM_GPS_POSITION|
This begins the preferences block. You also need to add a MENUPAGE entry
MENUPAGE|TASK_PAGE4|Preferences 1
Note that the number in the TASK_PAGE (4) is a continuation of the previous MENUPAGE TASK_PAGE (3) entry from the BLOCK_MAIN, ie TASK_PAGE counts start at 1 and go up every time you add a page, regardless of which block it appears in.
Here's a quick example, which if appended to the menu listing Starting with the default menu will change the preferences screen to only allow the flipping of the screen orientation
MENUBLOCK|BLOCK_PREF|BTM_GPS_POSITION|
MENUPAGE|TASK_PAGE4|Preferences 1|
MENUITEM|TASK_ROTATE_DISPLAY|
Additional notes
Bear in mind, that the GO runs Linux as its operating system and that file and directory names are case sensitive.
Lines within the menu definition file must be terminated by a Linefeed character (0x0a) or a Carriage Return / Linefeed combination (0x0d,0x0a). Macintosh users must take care of that, as their editors normally don't insert a Linefeed.
These options have been tested in software versions 5.1, 5.2, and 5.440 successfully. It may work with other releases, too.
Click to expand...
Click to collapse
Hi all,
I am learning how to back up my registry settings (using SASHIMI - thanks bengalih), and I have a few quick questions that I suppose can be posted in one of many post regarding SASHIMI, but I decided to ask a question here because it is not srictly connected to SASHIMI, and more people can find this info usefull.
The background problem:
I am trying to back up my favorite Contactx Order in favpeople Manila tab. I found th place in the registy where the data is stored:
[HKEY_CURRENT_USER\Software\HTC\People\FavoriteOrder]
There, for one of the people the data stored is:
"0"=dword:8000003E
(in HEXadecimal , or 2147483710 in Decimal values).
I have checked if the same reg value is always added to the same person (last call person in registry - for example) , and the answer is positive.
The Questions:
- is it possible to find out what is the connection between persons and assigned numbers (other then to change the settings, and then look in the registry for assigned DATA value to specific registry key)?
- I took the favpeople as an example, but the different types of Reg Keys has for DATA values (Programs, different settings...) - What about them?
and even more important:
- will the same numbers be assigned to the same people after:
- Performing hard reset (I assume they will be)
- Changing the ROM (again - I assume they will be)
- on the other WM device (I know that there are small differences in registry settings among diff. devices, but once that person find out that different registry location - can he use the data backed up from previous device or must he start drilling trough registry settings from start)?
Thank you in advance for the answer,
Cheers,
Nenad
p.s. - some programs use reasonable words and terms for registry DATA value, and that puts the smile on my face as everything is transparent and clear. Others, unforunately, adds this "crypted" data and I get frustrated when I want to insulate data that should be stored as the back up...
Hi,
am I asking in a wrong forum
I did a hard reset, and the favorite people I restored (by SASHIMI) are messed up. Wrong people, wrong order...
Am I missing something?
The tab order, program shortcuts and lot of other stuff came up OK, though
Is it posible that DWORD is randomly dedicated with new (hard) reset?
For example:
I make a back up of the registry with certain DWORD dedicatred to certain people (the ones I put in my fav people tab), and then if I add/ remove people from my contact list, the sequence is disorderd, and the back up performed after hard reset puts wrong people in the fav people tab?
Thanks for eventual answer,
Cheers,
p.s. - is there any link where I could get some BASIC info about mentuioned stuff (dword etc) - the search is useless, as every third post uses these key words...
Really this should be on the developers forum, but I cannot post there.
New 7" Chinese satnav, WINCE6.0.
cdFFM-0.3.5 put on TF card and run.
Errors in lines 2251, 2277, 2264, 2270, 2258 for info seem to be links, probably already there - pointing elsewhere.
After reboot many menu items don't work, run MortScript.exe (in root directory of ceFFM), this will allow the scripts to work thereafter, and the menu items work (note some are dummies - useful for modding).
It doesn't boot unless you do the simple kludge below.
To boot into ceFFM use "Navi Path" button to point Navigation to CEMenu.exe (in root directory of ceFFM), then check button takes you to cdFFM, then you can use "Navi Path" button to "Auto run GPS when startup" and you are straight into ceFFM.
[My path was SDMMC\cdFFM-0.3.5\CEMenu.exe, for example].
You then need to edit the navigator link in the programs directory.
In my case it was iGO8 so I edited SDMMC\cdFFM-0.3.5\PROGRAMS\iGO8.lnk to point to my navigator program like this:
23#"\SDMMC\iGO8\iGO8.exe"
The 23# is the number of characters in "\SDMMC\iGO8\iGO8.exe" (+1 for some reason)
Please note that quite a lot of the menu items in ceFFM are capable of brikking your device.
Now a question
OK, I know its poor form to reply to your own post but...
Two things still not sorted for this satnav:
1) A 480x800 version of NaviPlayer. I don't know how to set the skins to work.
2) The satnav will not load .CAB files. Even if I put wceload.exe and run it pointing to the required file, it just claims the .CAB file is not valid. I've tried quite a few, and I think they are. I presume its a means to prevent people modifying the device. Stand alone .exe's work just fine. Anyone got a fix for this, its really irritating!
If wceload.exe fails, and then probably only signed .CAB-files are accepted. Workaround: Allow installing unsigned .CAB-files. You do this by editing device's registry as
following:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"00001001"=dword:00000001
"00001005"=dword:000000DE
"00001006"=dword:00000001
"00001017"=dword:00000010
"0000101a"=dword:00000001
"0000101b"=dword:00000001
HTH
jwoegerbauer said:
If wceload.exe fails, and then probably only signed .CAB-files are accepted. Workaround: Allow installing unsigned .CAB-files. You do this by editing device's registry as
following:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]
"00001001"=dword:00000001
"00001005"=dword:000000DE
"00001006"=dword:00000001
"00001017"=dword:00000010
"0000101a"=dword:00000001
"0000101b"=dword:00000001
HTH
Click to expand...
Click to collapse
That's neat...
OK, not that unexpectedly I find no entry \security\policies\polices .
"security" is found:
use\comm\security
machine\comm\security providers
machine\comm\security
machine\software\microsoft\Rpc\securityService
value: machine\software\Rpc ="DCOM Security"
machine\software\internet explorer\security
value: machine\software\internet explorer\security\basic = "security name"
machine\software\internet explorer\security\NTLM = "security name"
"policies" doesn't appear at all.
I found a reference to "username = guest", but neither appeared anywhere else.
I did spot in machine\OEM that value "app" is a path that points to the OEM menu system (main.exe).
May be possible to intercept here (if you wanted).
root\.cab is set to name "@"=64 value "cabfile"
hmmm... nothing that leaps out at you ...
bother!
farmeroz said:
That's neat...
OK, not that unexpectedly I find no entry \security\policies\polices .
Click to expand...
Click to collapse
Create it!
OK I did that, rebooted.
A bit scary as I haven't added such things before...
Still doesn't work.
Attempting to 'run' nitro.cab (nitrogen renamed) fails
However the OS claims that there is no application associated with 'nitro'.
However .CAB is a cabfile under \root\
and a cabfile default icon is \SDMMC\ceFFM-0.3.5\system\wceload.exe,-101
shell\open\command is \SDMMC\ceFFM-0.3.5\system\wceload.exe\"%1\"
So (whilst I haven't a clue) I would expect .cab files to be spotted.
farmeroz said:
OK I did that, rebooted.
A bit scary as I haven't added such things before...
Still doesn't work.
Attempting to 'run' nitro.cab (nitrogen renamed) fails
However the OS claims that there is no application associated with 'nitro'.
However .CAB is a cabfile under \root\
and a cabfile default icon is \SDMMC\ceFFM-0.3.5\system\wceload.exe,-101
shell\open\command is \SDMMC\ceFFM-0.3.5\system\wceload.exe\"%1\"
So (whilst I haven't a clue) I would expect .cab files to be spotted.
Click to expand...
Click to collapse
Use Win32 "MSCEInf" utility (it's freeware, google for it) to extract any .CAB file, if "wceload" doesn't work for you. After having extracted the .CAB, you are able to copy the application/data to any location of your choice at mobile device.
Oooh... That looks like a solution....
Didn't work. Can't see why though.
Hmmm. That editor shows (XML)
[Version]
Signature = "$Chicago$"
CESignature = "$Windows CE$"
Provider = "BenThon"
surely chicago is a win9x version?
I thought I had, but reading the long Nitrogen thread I don't think I did.
There doesn't seem to be a version for wince5/6, that's downloadable from anywhere, even though it exists somewhere because people have run on wince5 systems. Microfi is overworked...
I was somewhat under the impression that mobile was +- same as CE, but clearly not.
Signature="$Chicago$"
simply tells you the machine's OS the cab was built on[
I guessed that, sadly after I had posted.
Basically for my satnav I need a music player to play in the background, easily reachable from iGo8 (using megaduck99 skin, I have now got just how I want it!) nav screen and back. Really all I ever want to do is skip to the next track, as with 1000+ MP3's, sometimes you just aren't in the mood for some of them. Naviplayer (if it had an 800x480 skin) is finger usable for this whilst driving. Then (with bluetooth) I can just plug the satnav into my car radio (FM is rather poor quality) and utter perfection .... (who needs CD's these days?).
I'll have to have another stab at working out how to run the skins on naviplayer.
Your front end, particularly with the wealth of apps, is excellent. I have now put it on a no-name 7" netbook I use to backpack with, and now realise how slow it is compared to the more modern ones. Good enough for emails etc though.
NB I have been starting (manually) by running CEMenu.exe rather than ceFFM, is that what you intended?
To reskin NaviPlayer it merely suffices to have a folder named "mpskin" containing the files for the required skin copied from the examples given.
Its not immediately obvious because there is no default skin file provided (eg the small gold one it defaults to).
The fonts aren't quite right, either size or location
I have come across a bug in some of the apps. If I open notepad and the file-open, the entry box is not within the screen just far enough off that you can't grab it to pull it down. This is also the case in word. Doubtless somewhere there is a file that sets the position, any ideas? Annoying because I can't edit the mpskn.skn file....
Modified MP3P.SKN inside NAVIPLAYER\MPSKIN
This should work for all the 'Simple 3.1" skins.
If you want a button to appear when minimised you will have to adjust the button size/position/etc .
This is done in/with [MAIN_MIN_WINPOS]
If you have a larger button (as I do) then you will need to make a button of the appropriate size to replace the one in
BACK_MIN.BMP
I haven't done one yet, for iGO8 it will need to be under the bluetooth one, and similar size.
Hope this is useful.
NB I have no loader files for NaviPlayer (last good mod), I got it included in ceFFM.
;====Modified MP3P.SKN
[MP3 INFO]
MP3_Ver=1.0
[MAIN_WINPOS]
Width=800
Height=480
[MAIN_MIN_WINPOS]
Left=66
Top=0
Width=60
Height=24
WidthOne=1
[TRACK_POS]
Left=572
Top=129
Width=60
Height=14
SubValue=17
[TIME_POS]
Left=188
Top=129
Width=90
Height=14
SubValue=17
[SEEK_POS]
Left=212
Top=152
Width=373
Height=9
[INFO_POS]
Left=280
Top=189
Width=150
Height=9
;SubValue=0
[STATUS_POS]
Left=387
Top=375
Width=64
Height=38
[TITLE_POS]
Left=218
Top=65
Width=366
Height=20
[VOLBAR_POS]
Left=466
Top=272
Width=162
Height=6
[PEEK_POS]
Left=173
Top=250
Width=250
Height=28
SubValue=7
[VOLSLIDER_POS]
Left=466
Top=271
Width=162
Height=10
SubValue=3
;[TIMESLIDER_POS]
;Left=216
;Top=179
;Width=369
;Height=10
[PLAYOPT_POS]
Left=561
Top=184
Width=147
Height=12
SubValue=30
;====================
;Button Position
;====================
[BT_PLAY_POS]
Left=331
Top=330
Width=140
Height=150
[BT_STOP_POS]
Left=474
Top=285
Width=178
Height=49
[BT_PREV_POS]
Left=147
Top=396
Width=180
Height=84
[BT_NEXT_POS]
Left=474
Top=396
Width=178
Height=84
[BT_OPEN_POS]
Left=0
Top=102
Width=140
Height=73
[BT_MODE_POS]
Left=661
Top=342
Width=139
Height=138
[BT_ALBUM_POS]
Left=0
Top=182
Width=140
Height=73
[BT_EFFECT_POS]
Left=660
Top=485
Width=130
Height=70
[BT_EQ_POS]
Left=661
Top=182
Width=139
Height=73
[BT_PRESET_POS]
Left=661
Top=261
Width=139
Height=73
[BT_MULTI_POS]
Left=0
Top=23
Width=140
Height=73
[BT_VOLDN_POS]
Left=147
Top=342
Width=180
Height=50
[BT_VOLUP_POS]
Left=474
Top=342
Width=178
Height=50
[BT_MUTE_POS]
Left=0
Top=261
Width=140
Height=73
[BT_EXIT_POS]
Left=661
Top=23
Width=139
Height=73
[BT_MINIMIZE_POS]
Left=661
Top=102
Width=130
Height=73
[BT_SHUF_POS]
Left=0
Top=342
Width=140
Height=138
[BT_MIN_NORMAL_POS]
Left=0
Top=0
Width=60
Height=24
[BT_MIN_NEXT_POS]
Left=62
Top=0
Width=4
Height=24
[BT_MIN_MUTE_POS]
Left=68
Top=0
Width=4
Height=24
;==============================
; IMAGE LIST
;==============================
[IML_NUMBER]
Width=16
Height=12
[IML_STATUS]
Width=32
Height=38
[IML_PLAYOPT]
Width=49
Height=12
;==============================
; COLOR Type : BGR (0xffffff)
;==============================
[COLOR]
Info=0xffffff
Title=0xffffff
Seek=0xffffff
PeekLeft=0xffffff
PeekRight=0xffffff
VolumeBar=0xd14a00
;==============================
farmeroz said:
Please note that quite a lot of the menu items in ceFFM are capable of brikking your device.
Click to expand...
Click to collapse
You really experienced it? If so then you should specify them here to clarify things.
ceFFM's Original Thread
jwoegerbauer said:
You really experienced it? If so then you should specify them here to clarify things.
ceFFM's Original Thread
Click to expand...
Click to collapse
Sorry for the delay, HDD MBR problems....
No, I didn't brick my machine, I am very cautious. However being able to play with the registry, hexeditors etc, is potentially hazardous.
Hmm, on reflection its a combination of not knowing what they all do, and not knowing my way round winCE. Ie ignorance.
String not closed
China gps KENMOO 7', wince 6. Hello, excuse my English. Trying to install ceFFM, the installation begins, but then the message: String not closed (mising quote)
Line 3631 (\ SDMMC \ ceFFM.mscr)
If (key EQ "Startup), and it's over. I can modify anything? Installing on SDcard. Thank you.