Database Info

[Q] Device wont connect to computer. Running Infused Infusion

I have downloaded and installed drivers multiple times and computer wont even recognize device. Have gone into USB debugging same result. Any suggestions or advice???? Thanks

Did you mount USB?
Sent from my SAMSUNG-SGH-I997 using XDA App

Mount the USB??? what do u mean?

re: Samsung USB drivers
supadupadoug said:
I have downloaded and installed drivers multiple times and computer wont even recognize device. Have gone into USB debugging same result. Any suggestions or advice???? Thanks
Click to expand...
Click to collapse
This should solve the usb driver problem. Get Samsung Kies Mini
it comes with usb drivers which work just fine.
Before you install this, make sure that any other samsung usb drivers
are completely uninstalled and your usb cable unplugged.
Then restart the computer before you start the installation process.
After you install it, be sure to restart the computer with the samsung
usb cable unplugged and plug it back in after windows is fully started
and ready to go.
http://org.downloadcenter.samsung.c.../20110521192620273/Kies_2.0.2.11071_128_2.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have a great day!
Enjoy!

Still no luck. When I first insert the usb I see the device then it drops off. And Im not having any luck with Kies. When I select Kies on the device it says initializing and connecting but nothing shows up on the computer. Do i or can I reset kies on my device?

USB Modem on Windows RT

Hey guys,
for days I tried to get my O2 Surftstick to run on my Microsoft Surface Tablet. I'm not sure if there are any Drivers for the build in
USB Modem (Huawei E173), but thats not the mainproblem. This is that the device has 2 USB Modes. The one is a mass storage device with the Windows Drivers (this is the device detected by Surface) and the other one is the USB Modem mode. The Problem ist that the USB Modem is normally detetcted after installing those Drivers on mass storage. No Problem on Windows 8, but in Windows RT there is no way to install a 3rd Party Software including the Drivers. Without the drivers the USB Modem is not detected and I cant even see if there would be drivers for it. I tried a lot of things, f.e. porting all Software Data and even the Registry Entrys to my Surface. The result ist that my Surface Shows the Software (in my case Mobile Partner) as installed,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but detects still only the Mass Storage. I tried some other things, but they all had no effect, so I wrote an email to
Huawei asking for Windows RT Support but they didnt asnwer. I think if we would find a way to Change USB Mode it would
be a benefit to make more Surfsticks from other carriers working.
Please help, I have no more Ideas but would really like to see my Surface working with my Surfstick,
Malte1234511

killall said:
O2 Huawei E173 3G Dongle not working yet, you need Connection Manager installed, but I tweeted O2 UK about it and they are working on a WinRT app and expect to release it soon.
Click to expand...
Click to collapse
See my post from another thread.

Galaxy S7

Have a Galaxy S7 and every time I connect to my car I get this message. Please see attached. How do I make this stop coming up? Really aggravating...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

First of all, if you are using an OS X device (Mac), make sure you have the proper drivers for the S7 installed on your device. If you are using a Windows device, make sure you have the proper adb drivers and the usb drivers for the S7. Otherwise, that error message would persist.
Good luck

I'm confused this is when I connect it to my car with the charging cable...

I get that, too, in my Chevy Silverado. The nav console in my truck my be Apple (IOS) or Windows CE based. Not sure which. Oddly enough it didn't do that originally. Not sure when it started.

This is the msg when you connect to a your car with USB cable right? You can change the settings what happens when you connect to a USB cable. GS7 has the switch app pre loaded which helps move data, settings from the older phone maybe uninstalling it will help. I had the same error when I connect my GS7 to my cars USB port for charging.
Sent from my SC-02H using Tapatalk

francisamarsingh said:
This is the msg when you connect to a your car with USB cable right? You can change the settings what happens when you connect to a USB cable. GS7 has the switch app pre loaded which helps move data, settings from the older phone maybe uninstalling it will help. I had the same error when I connect my GS7 to my cars USB port for charging.
Click to expand...
Click to collapse
For me, yes when using USB cable. Bluetooth is fine, though...

can you run the hardbrick msmdownloadtool.exe on linux?

I have successfully unbricked my phone back to hydrogen twice before but unfortunately I don’t have a windows computer or friends. It seems to load the same in wine but it dosen't recognize the device (oneplus 6) and often freezes. Anybody have an idea how i can make this work. thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Linux_fart_18.3 said:
I have successfully unbricked my phone back to hydrogen twice before but unfortunately I don’t have a windows computer or friends. It seems to load the same in wine but it dosen't recognize the device (oneplus 6) and often freezes. Anybody have an idea how i can make this work. thanks
Click to expand...
Click to collapse
With Virtual system install windows 7 and get your job done.

reza6d said:
With Virtual system install windows 7 and get your job done.
Click to expand...
Click to collapse
I got my windows 7 key yesterday and strangely what ive found out through researched is that my laptop is so old that it only supports 32 bit virtualization and not 64 even though the host system is a 64 bit. Anyhow, I get the same results as when I try to run it through wine.
https://drive.google.com/file/d/1E27aYpN82vv0GZQcK9iQuCSlwZX37q0J/view?usp=sharing
Finally got some one to let me fix it on their windows 10, easy peasy.

Hey i know this thread is old but:
There's a cross-platfrom implementation for EDL: https://github.com/bkerler/edl
QFIL emulation should do what you need if you already have the required files.

Win10 drivers needed for N8000

Hello.
Would you please be so kind to point me to correct driver for a GT-N8000 on Windows 10?
I want to flash a custom rom on it and it seems I can't make it work.
Every time I plug in it says something like in the screenshots attached.
Tried:
- installed Samsung USB Driver (v1.7.43.0)
- on 2 dif laptops
Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ToothFairy' said:
Hello.
Would you please be so kind to point me to correct driver for a GT-N8000 on Windows 10?
I want to flash a custom rom on it and it seems I can't make it work.
Every time I plug in it says something like in the screenshots attached.
Tried:
- installed Samsung USB Driver (v1.7.43.0)
- on 2 dif laptops
Thank you.
View attachment 5231755View attachment 5231759
Click to expand...
Click to collapse
It could be, that your cable / dock connector is dirty or faulty.
If your could test another cable (or buy one), this would be the first step I would do.

U're right, thanks!
I have another cable, tried that and it worked!
Thanks! Never crossed my mind to check with another cable since it's the original one.

One more thing html6405 please!
Which of rom's from your page would you recommend in terms of stability and higher vers of android?
Thanks again.