hello guys i have a galaxy gio ive rooted it and flash clock work mode on it but not for galaxy gioonly for some other phone i was downloading the cynaogen 7 mod and canceled the download after a moment i turned it off and it doesnt want to turn on now. please help
do you test to remove the battery and plug USB data cable and go to fastboot mode?
yeah man nothing works i dont know what to do.it just turned off and it oddly wont turn on
Hi, i have been restlessly searching XDA and the web for a solution to a problem i have with my HD2 (EU version - o2). I normally flash a new ROM every weeks or so just to keep up to date with the latest ROMs and stuff and its just become a hobby of a sort. I have MAGLDR and flashed with "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)". I have been using this ROM for about a week and so now with no problems whatsoever.
The problem i am experiencing now is that i am trying to do a full wipe (task29) using the HD2 toolkit in order to flash a fresh ROM. My USB cable is working perfectly fine and my PC recognises USB when i am booted in Android. But for some reason i get no connection to USB while in boot loader mode. Afer the usual RED BLUE GREEN at the bottom of the screen u get SERIAL when not connected to USB but when i connect it to USB its just blank and not picked up by the PC... Why is this? I dont know, but i sure hope someone can help me out.
Peace
Anyone? Please?
Hi Guys i need to know because one person brought samsung captive bricked not charger and i charger the battery on other samsung captive i put the battery full on the phone brincked and the screen on then the phone is in mode download but one issu when i put de usb on my compute the phone don't connect on odin and i put off the phone and on phone present boot att ..... so present cyanogenmod and Miui XD have 2 OS when in miui boot the phone down and y dry again phone in home screen very slow and a wait connect the phone on my pc and don't connected.
what happend why the phone ??? i don't know is the driver phone don't have ?? i don't have idea what happen why don't connected will work driver phone with usb jig ???
hello friends I have a problem with my samsung tab 2 SGH - i497 when trying to install a custom recovery through the application Install TWRP , now my tab will not start, or load, nor can enter into recovery mode or download mode , please ayudenme I can do to fix it .
Hello,
If your device will not charge, will not boot to any of its modes, has no LED when connected to charger or PC, does not vibrate when power is pressed, will not connect to PC or is not recognized by PC, then unfortunately the device is probably hard bricked and is dead.
There is a chance that a Samsung USB Jig will help you boot it to download mode, they can be found on eBay for $3-5 US. If you get a Jig, insert it in the microUSB port on the device, if it works, it will force the device into download mode and you can then connect to PC and flash your stock firmware or possibly only the stock recovery to replace the custom recovery that bricked your device to recover the device if you are lucky. There may or may not be some other steps required after getting the device recovered to get it correctly repaired, or you might get lucky.
If that doesn't work, then your only other option is to send it in for JTAG service at the repair shop of your choice, you can find them with a Google Search.
Your device probably has a locked bootloader, as do most Samsung devices in the past 2-3 years. Attempting to flash these devices with locked bootloaders with anything other than the devices' current stock firmware or newer results in a permanently bricked device, some can be recovered but not in all cases.
In the future, regardless of how familiar you are with android and flashing, always familiarize yourself with these kinds of details about your specific model number before you do anything to your device. Good luck.
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
luishuiza said:
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
Click to expand...
Click to collapse
Try something like this along with the USB jig.
Samsung Tab USB adapter
Connect the adapter to your Tab then connect the USB jig to the adapter. If the jig is going to help you that will work.
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
TerrorToetje said:
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
Click to expand...
Click to collapse
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
d3nni said:
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
Click to expand...
Click to collapse
I ordered a new USB port board, will let you know the results!
Any results after changing the usb port?
Did fast charge still work for you? And this replacing the USB port work? I think this is related to a broken USB ic. For me replacing the USB port didn't help
Sometimes it's a bad charging port and / or liquid damage to the charging port.
If your home button clicks but does not work it could be liquid damage near the home button. Same goes for power and volume buttons.
I just fixed a S6 edge plus yesterday power button not working, liquid damage all around power button area, fixed burnt components and corroded pins.