Related
I just got this phone yesterday and immediately installed CM7. Thinks were going well, except for the random restarts at the lock screen and some apps not working. I read that Faux's CM stock kernel improves stability, and I hoped it would fix the restarts.
I read the directions thoroughly, wiped out the cache, wiped out the Dalvik cache, installed the kernel, and rebooted. It got stuck at a black screen, but I read that it does take a while, so I left it for about 10-15 minutes before removing the battery.
I wiped all caches, including user data, and reinstalled CM7 hoping it would fix whatever kernel problem just happened. Now it freezes at the blue LG screen.
I've tried several different caches that are all supposed to be comparable with my phone, and after installing them (after wiping all caches and /system each time) I'm stuck at the blue LG screen. I also tried flashing the entire phone to stuck, but to no avail. Installing the GB Kernel stock got me back to the black screen, this time flashing a brighter shade of black periodically, but still after 20 minutes, nothing happened.
I'm going insane after spending all day searching these forums and Google. If there's anything I can try besides installing kernels and reinstalling CM7, please let me know. I'm an idiot and didn't backup before I installed CM7 the first time, and every backup I've downloaded gives me an MD5 checksum error. At least I still have access to recovery. Most results I pulled up with searches brought me to people who lost their recovery menu as well, I'm not sure why I can't fix this even with the recovery menu still intact.
Keep in mind that you have to clear cache/dalvik right AFTER you have flashed the kernel, before reboot.
At this point, i would suggest to do a full wipe (clear data/factory reset, caches and also format system under storage and mounts). Then flash your flavor of CM7 and while still in CWM, flash the kernel of your choice, DON'T REBOOT, but clear cache/dalvik. Reboot, let it sit for a while and you should be good.
Sent from my LG-P999 using xda premium
Luriden said:
I just got this phone yesterday and immediately installed CM7. Thinks were going well, except for the random restarts at the lock screen and some apps not working. I read that Faux's CM stock kernel improves stability, and I hoped it would fix the restarts.
I read the directions thoroughly, wiped out the cache, wiped out the Dalvik cache, installed the kernel, and rebooted. It got stuck at a black screen, but I read that it does take a while, so I left it for about 10-15 minutes before removing the battery.
I wiped all caches, including user data, and reinstalled CM7 hoping it would fix whatever kernel problem just happened. Now it freezes at the blue LG screen.
I've tried several different caches that are all supposed to be comparable with my phone, and after installing them (after wiping all caches and /system each time) I'm stuck at the blue LG screen. I also tried flashing the entire phone to stuck, but to no avail. Installing the GB Kernel stock got me back to the black screen, this time flashing a brighter shade of black periodically, but still after 20 minutes, nothing happened.
I'm going insane after spending all day searching these forums and Google. If there's anything I can try besides installing kernels and reinstalling CM7, please let me know. I'm an idiot and didn't backup before I installed CM7 the first time, and every backup I've downloaded gives me an MD5 checksum error. At least I still have access to recovery. Most results I pulled up with searches brought me to people who lost their recovery menu as well, I'm not sure why I can't fix this even with the recovery menu still intact.
Click to expand...
Click to collapse
This is what you need to recover your phone
http://forum.xda-developers.com/showthread.php?t=1248644 , after that you need to root again and reinstall NVflash. Check youtube for instractions to flash CM7 on your phone. Good luck
Instaling custom kernel instructions:
Wipe Cache
Wipe Dalvik
Wipe Batt Stats
Install Kernel
Fix Permissions
Reboot
ratza66 said:
This is what you need to recover your phone
http://forum.xda-developers.com/showthread.php?t=1248644 , after you need to root again and reinstall NVflash. Check youtube for instractions to flash CM7 on your phone. Good luck
Click to expand...
Click to collapse
That worked! I came across that earlier, but I downloaded a similar package with a flash.bat that didn't fix it. Sure enough, I'm back. Thanks!
Make sure you downloaded his CM7 version and not Stock kernel.
Luriden said:
That worked! I came across that earlier, but I downloaded a similar package with a flash.bat that didn't fix it. Sure enough, I'm back. Thanks!
Click to expand...
Click to collapse
You welcome, I've added info on how to install custom kernel too
What are the usual behaviors while waiting for the phone to boot up for the first time with the new custom kernel? I downloaded the latest March nightly of CM7 (the latest April build gave me a bad file error while trying to install for whatever reason) and Faux's LGE Pre-OC/UV Kernel Version 013, did the proper order of installation, and it's been sitting for about 15 minutes now at a black screen that keeps flashing on and off. With USB plugged into my PC, I'm hearing a rapid "plugged/unplugged" sound loop with each flashing screen. Will I have to do the whole ROM Recovery tool process to try again?
Luriden said:
What are the usual behaviors while waiting for the phone to boot up for the first time with the new custom kernel? I downloaded the latest March nightly of CM7 (the latest April build gave me a bad file error while trying to install for whatever reason) and Faux's LGE Pre-OC/UV Kernel Version 013, did the proper order of installation, and it's been sitting for about 15 minutes now at a black screen that keeps flashing on and off. With USB plugged into my PC, I'm hearing a rapid "plugged/unplugged" sound loop with each flashing screen. Will I have to do the whole ROM Recovery tool process to try again?
Click to expand...
Click to collapse
You can't install custom kernel on nightly release. Use RC 7.2 and yes do the rom recovery and back it up so the next time you can just restore to any rom that works on your phone.
This may sound crazy, but I feel like I CM7-proofed my phone. Ever since I messed up that first time with the kernel and used the recovery tool, I can't get CM7 loaded anymore. I got 7.2 RC and installed it with the kernel the proper way, and got stuck at the LG screen.
So I used the recovery tool again, then NVFlash, wiped data/cache, installed the root file, then tried installing just 7.2 RC by itself. No luck.
I used recovery tool again, then NVFlash, then wiped data/cache, then used restore to bring it back to the stock + root that I made this morning before trying 7.2 RC and I'm back... so I went to CWM again and did wipe data/cache, and installed the SAME CM7 file I installed with yesterday morning which worked fine at the time, the latest stable release (7.1), and I'm still stuck at the LG screen.
This makes absolutely no sense. EaglesBlood installs fine, so it's not a problem with custom roms, I just don't like EaglesBlood (and EaglesBlood also froze when installing a custom rom the correct way as well). I'm tempted to just stick with the stock GB 2.3.3 + root since it works, I'm just missing the features I had yesterday of CM7 before I installed that god forsaken kernel.
Luriden said:
This may sound crazy, but I feel like I CM7-proofed my phone. Ever since I messed up that first time with the kernel and used the recovery tool, I can't get CM7 loaded anymore. I got 7.2 RC and installed it with the kernel the proper way, and got stuck at the LG screen.
So I used the recovery tool again, then NVFlash, wiped data/cache, installed the root file, then tried installing just 7.2 RC by itself. No luck.
I used recovery tool again, then NVFlash, then wiped data/cache, then used restore to bring it back to the stock + root that I made this morning before trying 7.2 RC and I'm back... so I went to CWM again and did wipe data/cache, and installed the SAME CM7 file I installed with yesterday morning which worked fine at the time, the latest stable release (7.1), and I'm still stuck at the LG screen.
This makes absolutely no sense. EaglesBlood installs fine, so it's not a problem with custom roms, I just don't like EaglesBlood (and EaglesBlood also froze when installing a custom rom the correct way as well). I'm tempted to just stick with the stock GB 2.3.3 + root since it works, I'm just missing the features I had yesterday of CM7 before I installed that god forsaken kernel.
Click to expand...
Click to collapse
I Think you are missing a one step, Wipe Dalvik. Ok let start from the begining,
First restore your phone to stock, let it boot. Root your phone and install CWM. Install CM7.2 RC rom and let it boot. Go back to the CWM and follow this instructions:
Wipe Cache
Wipe Dalvik
Wipe Batt Stats
Install Kernel
Fix Permissions
Reboot
all these steps are important. I was using CM 7.2 RC with Faux's kernel without any problem and it worked flawlessly
I just tried again with those instructions, and I still can't even get CM7 to boot up for the first time.
- Recovered my phone to stock using rom recovery tool
- Let boot, got to android's home screen, shut down
- Used One-Click-Recovery's "Flash CWM 5.0.2.0 Internal and External SD ROM" feature to install CWM (I'm assuming this is the proper way. I learned this from a YouTube video and it helped me to root my phone and get CM7 working the first time)
- Booted into CWM, wiped user data and cache, installed root-g2x-su-2.3.6.3.zip
- Restarted just to be sure (though I have tried just flashing CM7 after the root without restarting) and got into the android home screen just fine after I had to go through initial setup again. Though oddly enough my Google Apps were still present. They weren't present the very first time I rooted my phone, I had to install gapps.
- Shut down phone, went into CWM again
- Wiped user data, wiped cache, installed CM7 7.2 RC1
- Rebooted
- Stuck at blue LG screen for eternity.
I'm using the same root file as I did when I rooted my phone for the first time, and I've tried using this same method with the very first CM7 file I successfully installed and ran, and I'm still stuck at the blue LG logo unless I stock recover again and stick with stock. Rooting works fine, I've been able to run rooted apps on the stock rom, I just can't install any version of CM7 again for the life of me.
Luriden said:
I just tried again with those instructions, and I still can't even get CM7 to boot up for the first time.
- Recovered my phone to stock using rom recovery tool
- Let boot, got to android's home screen, shut down
- Used One-Click-Recovery's "Flash CWM 5.0.2.0 Internal and External SD ROM" feature to install CWM (I'm assuming this is the proper way. I learned this from a YouTube video and it helped me to root my phone and get CM7 working the first time)
- Booted into CWM, wiped user data and cache, installed root-g2x-su-2.3.6.3.zip
- Restarted just to be sure (though I have tried just flashing CM7 after the root without restarting) and got into the android home screen just fine after I had to go through initial setup again. Though oddly enough my Google Apps were still present. They weren't present the very first time I rooted my phone, I had to install gapps.
- Shut down phone, went into CWM again
- Wiped user data, wiped cache, installed CM7 7.2 RC1
- Rebooted
- Stuck at blue LG screen for eternity.
I'm using the same root file as I did when I rooted my phone for the first time, and I've tried using this same method with the very first CM7 file I successfully installed and ran, and I'm still stuck at the blue LG logo unless I stock recover again and stick with stock. Rooting works fine, I've been able to run rooted apps on the stock rom, I just can't install any version of CM7 again for the life of me.
Click to expand...
Click to collapse
Follow this guy on YT, you will find everything there
http://www.youtube.com/watch?v=fxMnnarHaOU
Installing CM7 tutorial
http://www.youtube.com/watch?src_vi...id=annotation_334516&feature=iv&v=Cy9on64jAZs
This one is even better
http://www.youtube.com/watch?v=vUaWXM8GwUI
I've done what all three of those videos have shown. These methods work for other custom roms just fine, just not CM7 which is what I want, regardless of what build I use. Which rom is the closest to CM7? I tried EaglesBlood and I noticed a lot of changes I didn't agree with, I didn't toy around with it long enough to see if I could get it working like CM7.
EDIT: Even tried Nullifier Dual Wipe, still stuck. Just... wow.
EDIT #2: Now EaglesBlood doesn't even want to run, also getting stuck at the LG logo after recovering, wiping data/cache, and flashing the rom. It worked fine last night, I just erased it so I could give CM7 another shot and didn't have enough space on my SD to have a backup of that AND my rooted stock.
EDIT #3: Did the recovery/root/flash method again, going from fresh stock to flashed CM7, and this time it sits at the blue LG logo for a few seconds, before restarting and going back to the white LG logo. I wiped the cache though to prevent a bootloop, and I think most bootloops occur with the CM7 logo anyway.
There's no chance of any files being on the micro sd that could be causing the problems, could there? And is there anything else I should be wiping/formatting these tries? Like maybe rom recovery doesn't wipe EVERYTHING out, and I still have remnants of other attempts still?
Luriden said:
I've done what all three of those videos have shown. These methods work for other custom roms just fine, just not CM7 which is what I want, regardless of what build I use. Which rom is the closest to CM7? I tried EaglesBlood and I noticed a lot of changes I didn't agree with, I didn't toy around with it long enough to see if I could get it working like CM7.
EDIT: Even tried Nullifier Dual Wipe, still stuck. Just... wow.
EDIT #2: Now EaglesBlood doesn't even want to run, also getting stuck at the LG logo after recovering, wiping data/cache, and flashing the rom. It worked fine last night, I just erased it so I could give CM7 another shot and didn't have enough space on my SD to have a backup of that AND my rooted stock.
EDIT #3: Did the recovery/root/flash method again, going from fresh stock to flashed CM7, and this time it sits at the blue LG logo for a few seconds, before restarting and going back to the white LG logo. I wiped the cache though to prevent a bootloop, and I think most bootloops occur with the CM7 logo anyway.
There's no chance of any files being on the micro sd that could be causing the problems, could there? And is there anything else I should be wiping/formatting these tries? Like maybe rom recovery doesn't wipe EVERYTHING out, and I still have remnants of other attempts still?
Click to expand...
Click to collapse
No chance. Nothing will be left over when you wipe your phone. Your SD card is only accessed when you tell CWM to do so. Take your phone back to stock. Do it again this time try either a froyo rom or ICS rom. Then go back wipe everything and install CM7. Sometimes you have to take the long way. after flashing my phone a bazzilion time I learned this the hard way when I couldnt load EB ICS anymore. Had to run GB to get to ICS. Try it in reverse or from a step below and it should go through fine. IF it doesn't, you might have to use ICS instead, which may be stuttery, but works damn well.
DupleX01 said:
Keep in mind that you have to clear cache/dalvik right AFTER you have flashed the kernel, before reboot.
Click to expand...
Click to collapse
I'm wondering why he still has the issue. YOU CLEAN CACHE BEFORE FLASHING KERNEL/ROM UPDATES!!!
Sent from my LG-P999 using xda premium
For God sake, just flash a random ROM to get access to inside your phone.
1. DIAG your phone OFFLINE with v21e baseband (phone will automatically restart)
2. Let it stay for 5mins after that
3. Use your phone for 15mins
4. Root using 1Click
5. Install CWM
6. Install your ideal ROM + GAPPS (if needed) via CWM
7. Reboot
8. Go outside your living room and watch TV for at least 15mins
9. Reboot your phone into CWM and flash your ideal kernel
10. Enjoy!!!
You better know which ROM/kernel to choose from. Period.
How to upgrade/downgrade your baseband? Do some search, please!
Sent from my LG-P999 using xda premium
I'll do a flash of Froyo or ICS and possibly some baseband research tomorrow. Considering my luck getting a simple rom flash to work, I don't feel too comfortable dealing with the baseband.
A friend was brave enough (somehow) to let me root and install CM7 on his phone, he has the same phone as mine. I got CM7 7.2 RC and Faux's DM UV working like a dream on my first try. Tried it on my phone after recovering it, same problem. So it's a problem that exists deeper on my phone, not with my methods.
The NAND restores for GB and Froyo give me MD5 checksum errors, and the stock zipped rom of GB gives me an installation failed error, so I'm thinking a zipped Froyo rom won't work either, but it might be worth a shot.
Tried Weapon and MIUI too. No go. If I don't get stuck at the blue LG logo, then I'm stuck in a loop between the two LG logos or stuck at a flashing black screen. 8/10 times though it's the blue LG, I think the other errors may have actually been me forgetting to wipe my cache when I was flustered.
I'll try ICS, and hopefully won't get to a point where I have problems installing things I used to be able to, since that seems to be the pattern. After that I finally give up.
I FIGURED IT OUT! Well, sort of. For the hell of it, I downloaded CM7 7.1.0.1 through Rom Manager and it installed fine. It downloaded it to my internal SD, so I hooked it up to my PC to copy the 7.2.0 RC1 to my internal SD and tried installing. No go.
So I went on my phone's web browser and redownloaded 7.2.0 RC1 that way directly to the phone. It works. So somehow, roms I copy from my PC to the phone appear to not work, yet apps and kernels still do. I'm running CM7 7.2.0 RC1, downloaded through my phone's web browser, with Faux's DS UV kernel, copied from my computer. After four days, I finally found a workaround, so I'll stick to it. Whatever works, I guess. I can try reinstalling my USB drivers, but I can probably get by with a combination of the phone's web browser and ES File Manager w/ LAN if need be.
So I was able to successfully root my AT&T HTC One X and decided I wanted to install the CM 10 ROM (1st ROM install). I did all the data backups with Titanium, downloaded the latest zip files from cyanogenMod (both the 12/13 and 12/14 nightly versions), transferred them to my phone, booted into recovery (TWRP), did a back-up, did a system wipe, flashed the ROM and then did a reboot. However, when it boots it gets stuck in the boot-up screen (bootloop) and doesn't do anything. I have read on this and it keeps saying to wipe system data again and flash the ROM again and it keeps doing this. I want to install this ROM, but I need some help. Any suggestions on what I did wrong?
Note: I accidentally posted this in the Android Q&A section, so I apologize for the double post. I just think this is probably the best place to get my answer.
Did you flash the boot.img?
I did, but incorrectly the first time. I flashed it the right way and everything is working good. Then only problem I have now is when restoring from Titanium Backup it gives me an error from a process called com.android.phone (I think that is what it said). So I wiped it again and rebooted and everything is fine. I can reinstall all the apps, but what could cause that? Could it be some of the data backed up doesn't cooperate with this ROM? Either way I love the CM10 ROM.
jon8105 said:
I did, but incorrectly the first time. I flashed it the right way and everything is working good. Then only problem I have now is when restoring from Titanium Backup it gives me an error from a process called com.android.phone (I think that is what it said). So I wiped it again and rebooted and everything is fine. I can reinstall all the apps, but what could cause that? Could it be some of the data backed up doesn't cooperate with this ROM? Either way I love the CM10 ROM.
Click to expand...
Click to collapse
if they are backups from sense, that *MAY* cause problems, but don't quote me on that. I don't use sense, can't say for sure
OK, maybe that is why. Not a big deal since I haven't had the One X too long. Thanks for the help guys.
Good to know
I'm having difficulty installing the latest Synergy ROM (4/20/13). I am coming from liquid smooth 4.2.2. I wiped all data, cache, and dalvik twice as well as formatted the system before I tried installing. I get to the installer and choose the recommended install and once it reaches a certain point the screen flashes the samsung logo and then goes black. I think the phone is still technically on at this point because I can't boot it up, but once I pull the battery and try booting it it just does the same thing again. I just installed the stock OTA zip from one of the threads for the time being. If anyone can help me it'd be greatly appreciated! thanks!
does the installer finish? If it doesnt redownload the synergy rom and retry.
I'm having the same problem.. Trying to install the 4.2.1 version and it just hangs at the Verizon slash screen after a successful installation. Rooted and unlocked.. frustrating
I'm gonna try to redownload it and install cause I don't think it was finishing the installer. Ill let you guys know if it works for me
Ok so I redownloaded the rom and installed it with no problems this time. Went through aroma normally, although I did notice that it stopped and booted the phone when the installer was only at 75%. I'm thinking it just doesn't go all the way to 100% on the screen but it did finish. Thanks for the help!
never mind, having difficulties again lol. Rom installed without a text messaging app (wtf?) and my set up wizard wont work, as well as data and wifi. trying to reinstall.
ok so now it won't even finish the installer this time. it stops at format /system gs3 mode and reboots the phone. Idk wtf is going on with this thing. The first time I did a custom install, second time I did the synergy recommended install.
Text messaging apps need to be selected in aroma installer (though you said you selected the recommended install so that's weird. Did you check the md5 to verify a good download?)
As for radio and Wi-Fi, what modem baseband are you on?
Yea i'm pretty sure it was a good download. I've downloaded the file three different times. I'm on baseband I535VRBLK3. I installed AxisM Rom instead for the time being, but this thing is riddled with bugs so I'd like to try and get synergy running still
Hi Everyone,
I've been having some trouble getting custom ROMs to fully boot on my girlfriend's Galaxy Tab 2 (p3113). I was able to gain root access (I used this method: http://forum.xda-developers.com/showthread.php?t=2510669) and managed to install the latest CM rom, SlimRom, or OmniRom (with their respective Gapps).
However, I always run into the same problem: whenever I reboot from recovery (regardless of which rom was installed), android begins "optimizing" apps (presumably because I've cleared caches, including dalvik) and at the end, reports 2-3 process that have unexpectedly stopped, and reboots. I've done clean wipes with each install, and even tried re-downloading the roms, but nothing seems to work. Also, it doesn't seem like the stopped processes are consistent between roms. For example, the CM rom would report calendar and keyboard processes that have stopped, whereas Omnirom would report mediastorage and google search processes that have stopped.
Anyone have any ideas of what I can do to fix this?
It sounds like you are not doing a full wipe, I dont think it should be optimizing on a fresh clean install. Try factory reset, wipe cache/dalvik. And possibly system.(usually recomended)
Sent from my SGH-T889 using XDA Premium 4 mobile app
Thanks - that what I suspected as well, although I thought I was doing a full wipe (including /system) in TWRP, but maybe not?
Anyway, I somehow got it working last night after formatting /data and then flashing the last CM stable release (CM-10.1.3, p3110). Got the tablet to boot and setup and everything. Maybe there was something conflicting in the data folder, or that there was no more space on the internal SD. Guess I won't know now..
But I decided to flash the latest Omnirom instead, to get a 4.4 rom. Seems to be working fine now. Thanks for the reply!
I don't know if I missed a step or not, but every app and settings screen now takes about 20-30 seconds to open, booting takes 3-5 minutes. The phone is set up with the same ROM, kernel, apps, etc. as a few weeks ago when it was running super-fast.
I reflashed this version of CM 11 which had worked perfectly for me for about a month (this is a Samsung Galaxy Blaze S 4G):
cm-11-20150119-NIGHTLY-t769.zip
I was downgrading back to that after trying a nightly that made staticky lines all over my phone and made it lock up constantly...
When I reflashed, here's what I did (after backing up with TiBu):
In recovery I wiped to factory
Cleared the cache and Dalvik cache
Formatted /system and /data
Flashed the zip of CM 11 from my external SD
Flashed the zip of GaPPs from the external SD
Rebooted
Rebooted fine, I installed TiBu and Link2SD and started restoring apps/moving to 2nd SD card partition.
The phone is much much slower than stock. I don't know what the difference is... can someone please give me a checklist to try or tell me what I might have done wrong in the re-flashing process?
kanjigirl said:
I don't know if I missed a step or not, but every app and settings screen now takes about 20-30 seconds to open, booting takes 3-5 minutes. The phone is set up with the same ROM, kernel, apps, etc. as a few weeks ago when it was running super-fast.
I reflashed this version of CM 11 which had worked perfectly for me for about a month (this is a Samsung Galaxy Blaze S 4G):
cm-11-20150119-NIGHTLY-t769.zip
I was downgrading back to that after trying a nightly that made staticky lines all over my phone and made it lock up constantly...
When I reflashed, here's what I did (after backing up with TiBu):
In recovery I wiped to factory
Cleared the cache and Dalvik cache
Formatted /system and /data
Flashed the zip of CM 11 from my external SD
Flashed the zip of GaPPs from the external SD
Rebooted
Rebooted fine, I installed TiBu and Link2SD and started restoring apps/moving to 2nd SD card partition.
The phone is much much slower than stock. I don't know what the difference is... can someone please give me a checklist to try or tell me what I might have done wrong in the re-flashing process?
Click to expand...
Click to collapse
Hi
There are newer versions of CM11 t769 up already.
You should wipe cache and dalvik after restoring your apps. If it doesn't help, make a clean installation of cm and try if the speed is better. Restoring apps via Titanium Backup while using Link2SD can easily cause errors. May be you have reinstall apps without restore. Also new partitioning of your sd card could help.
LS.xD said:
Hi
There are newer versions of CM11 t769 up already.
You should wipe cache and dalvik after restoring your apps. If it doesn't help, make a clean installation of cm and try if the speed is better. Restoring apps via Titanium Backup while using Link2SD can easily cause errors. May be you have reinstall apps without restore. Also new partitioning of your sd card could help.
Click to expand...
Click to collapse
How do I choose a version of CM to use?? This is new to me, just rooted for the first time last month. I don't know how to choose... I was using that one I mentioned above for a month with zero issues, then upgraded to a new nightly, but had to downgrade back due to problems and that was where my issue here started...
I did wipe cache and Dalvik after restoring my apps, and I did repartition my SD card as Link2SD wasn't working for me after reflashing (I got a new beta version of Link2SD from the developer that worked perfectly).
kanjigirl said:
How do I choose a version of CM to use?? This is new to me, just rooted for the first time last month. I don't know how to choose... I was using that one I mentioned above for a month with zero issues, then upgraded to a new nightly, but had to downgrade back due to problems and that was where my issue here started...
I did wipe cache and Dalvik after restoring my apps, and I did repartition my SD card as Link2SD wasn't working for me after reflashing (I got a new beta version of Link2SD from the developer that worked perfectly).
Click to expand...
Click to collapse
The CM11 builds are sorted by date. Newest build CLICK HERE are always on the top. Latest is 02/23. Keep in mind that CM is still under develpoment and may not run stable.
LS.xD said:
The CM11 builds are sorted by date. Newest build CLICK HERE are always on the top. Latest is 02/23. Keep in mind that CM is still under develpoment and may not run stable.
Click to expand...
Click to collapse
Should I pick the newest build then, and reflash with that? I see there's a stable one for CM 10 for my phone, but it's from 2012...
Should I go with something other than CM? I'm just confused at this point. I like Kitkat and would like to stay with that if feasible (my stock phone was ICS).
kanjigirl said:
Should I pick the newest build then, and reflash with that? I see there's a stable one for CM 10 for my phone, but it's from 2012...
Should I go with something other than CM? I'm just confused at this point. I like Kitkat and would like to stay with that if feasible (my stock phone was ICS).
Click to expand...
Click to collapse
I haven't tested the builds as i don't have the phone, its usefull to read the CM11 thread for your phone to check out bugs. You can try newer builds, but theres no guarantee that everything works. All in all you should go for newer versions from time to time
LS.xD said:
I haven't tested the builds as i don't have the phone, its usefull to read the CM11 thread for your phone to check out bugs. You can try newer builds, but theres no guarantee that everything works. All in all you should go for newer versions from time to time
Click to expand...
Click to collapse
Hmm. My build was stable, I upgraded to a new one, and my phone stopped working. Going back isn't working either.
CM 10.0 is listed as a stable release, I'm wondering if that would be better (i.e. less time spent wiping and reflashing repeatedly) than a new nightly for CM 11?
kanjigirl said:
Hmm. My build was stable, I upgraded to a new one, and my phone stopped working. Going back isn't working either.
CM 10.0 is listed as a stable release, I'm wondering if that would be better (i.e. less time spent wiping and reflashing repeatedly) than a new nightly for CM 11?
Click to expand...
Click to collapse
CM10 = Android 4.1.2
CM10.1 = Android 4.2.2
CM10.2 = Android 4.3.1
CM11 = Android 4.4.4
CM12 = Android 5.0.2
CM10 means you have NO bugs, everything runs stable at the cost that you have a really old rom. If you don't like maintain your phone continuisly its a good choice. I really like trying new stuff, so i flash nearly every new build of used roms / kernels for my phones. So I would stay at CM11. But thats just my personal opinion. By the way you don't need to create backups with Titanium Backup all the time. Just make a backup with your recovery. After installing a new rom, use Titanium Backup with the option "Extract from nandroid backup" to restore your apps. On previous phones I also used tools like Link2SD or Int2Ext, but after some time it always caused problems and never ran 100% stable and fast, so think about if you really need it.
LS.xD said:
CM10 = Android 4.1.2
CM10.1 = Android 4.2.2
CM10.2 = Android 4.3.1
CM11 = Android 4.4.4
CM12 = Android 5.0.2
CM10 means you have NO bugs, everything runs stable at the cost that you have a really old rom. If you don't like maintain your phone continuisly its a good choice. I really like trying new stuff, so i flash nearly every new build of used roms / kernels for my phones. So I would stay at CM11. But thats just my personal opinion. By the way you don't need to create backups with Titanium Backup all the time. Just make a backup with your recovery. After installing a new rom, use Titanium Backup with the option "Extract from nandroid backup" to restore your apps. On previous phones I also used tools like Link2SD or Int2Ext, but after some time it always caused problems and never ran 100% stable and fast, so think about if you really need it.
Click to expand...
Click to collapse
Ack. Well... I like Kitkat a lot. I might get the latest CM11 nightly and new GAPPS and try that first.
I have so little memory, kept running out of space and that's why I use Link2SD. But thanks for the advice on TiBu, I did make a Nandroid backup last night from CWM.
kanjigirl said:
Ack. Well... I like Kitkat a lot. I might get the latest CM11 nightly and new GAPPS and try that first.
I have so little memory, kept running out of space and that's why I use Link2SD. But thanks for the advice on TiBu, I did make a Nandroid backup last night from CWM.
Click to expand...
Click to collapse
PA GApps are quite good and still up-to-date. Use "PICO" to save some space.
LS.xD said:
PA GApps are quite good and still up-to-date. Use "PICO" to save some space.
Click to expand...
Click to collapse
That looks great, thanks very much!
I'll post back here once I get my phone straightened out in the next couple of days to say what happened, in case it helps someone later.
Possibly stupid question - do I need to do anything with the kernel or pit if I'm just installing a new ROM? That was only for rooting, right?
kanjigirl said:
Possibly stupid question - do I need to do anything with the kernel or pit if I'm just installing a new ROM? That was only for rooting, right?
Click to expand...
Click to collapse
Kernel is always included in the new "rom". So everytime you flash a rom, you automatically flash the kernel with it. PIT is the partition table of the phones partition. As long its not clearly necessary, DON'T ever change it!
Got it, thank you for your help!
So last night I wiped the phone and flashed the latest CM 11 (from yesterday) and the Pico package from PA-GApps. The phone is now super-fast again. I restored a few key apps to try out for the next day or so before restoring the rest, but so far so good, everything is back to normal. Thank you so much for the help.
kanjigirl said:
So last night I wiped the phone and flashed the latest CM 11 (from yesterday) and the Pico package from PA-GApps. The phone is now super-fast again. I restored a few key apps to try out for the next day or so before restoring the rest, but so far so good, everything is back to normal. Thank you so much for the help.
Click to expand...
Click to collapse
Sounds great
Quick question - if this thread is still open. The phone's been fine since I flashed CM 11 and Pico GApps, until this morning, when it now does 'Android is Upgrading' every time I boot and every user app crashes as soon as it's opened. I have all auto-syncs and auto-updates disabled, and haven't added any user apps to the phone since Wednesday.
Do I need to flash again, and then have to go through the restore process all over? Or could it be an app causing this? I'm not sure where to look for a source of the problem.