Hi,
I only got to use my sensation a guess for about 2 or 3 months, then I rooted it and everyone was really happy exspecially me . Had it like that for about 10 days, went out for a few drinks, wich turn out to be a lot of drinks. Some how I decided to take a sprint down the street on speed that peoble still talk about. But when I took my phone from my pocket the screen was all colourful and perky. I could answear but not see anything.
Took the phone apart and found out if I fumble around the flex screen cable it work, but it worked for a while and then it malfunction again. So I decided that it was the flex cable on the screen. Bought another screen from ebay, and when I was changing it, even though I was very very careful and doing everything in slow motion the flex cable on the digitazer ripped in two peices so I went again to ebay.
Got one and put it in. But I only get black screen, when I press on the screen lights up and off, and then it vibrates. The phone can connect to the pc but when I jus ddms to take a screen capture it captures a big black image.
So it might be a hardware failure but I´m a very stubburn man, so any ideas on what to do or what to try, before I will get bold?
bjartman said:
Hi,
I only got to use my sensation a guess for about 2 or 3 months, then I rooted it and everyone was really happy exspecially me . Had it like that for about 10 days, went out for a few drinks, wich turn out to be a lot of drinks. Some how I decided to take a sprint down the street on speed that peoble still talk about. But when I took my phone from my pocket the screen was all colourful and perky. I could answear but not see anything.
Took the phone apart and found out if I fumble around the flex screen cable it work, but it worked for a while and then it malfunction again. So I decided that it was the flex cable on the screen. Bought another screen from ebay, and when I was changing it, even though I was very very careful and doing everything in slow motion the flex cable on the digitazer ripped in two peices so I went again to ebay.
Got one and put it in. But I only get black screen, when I press on the screen lights up and off, and then it vibrates. The phone can connect to the pc but when I jus ddms to take a screen capture it captures a big black image.
So it might be a hardware failure but I´m a very stubburn man, so any ideas on what to do or what to try, before I will get bold?
Click to expand...
Click to collapse
If your phone can connect to PC , then try adb . Hope you the basics of adb.
Open an adb terminal. and type : "adb reboot recovery"
Your phone should boot into recovery. Then clear cache and dalvik cache.
Now reboot your phone.
If this does not help, then remove the sdcard and try to boot.
By the way, Are you S-OFF and rooted??
not working
It is like he has no firmware installed.
I can access him through ddms in the adb tools folder, and see all the process
that he is doing when he is in debug mode volume down plus power button pressed. But the screenshots are black.
But I can´t access him when he normal boots up?
I rooted him, with I think ICS, dont know if I did s-off or not or if it
worked.
Can I flash him with someting through adb ?
Related
Hi all,
I am at my wits end on this problem if anyone can offer any adivice it would be greatly appreciated. So let me give a recap of what has occured thus far. The water damage tag for some reason turn pink thus i am unable to get warranty exchange. I am pretty certain that the phone has never been expose to any water of anything of that sort, but i do live in houston, tx so might be humidity or what not that cause the tag to turn. Anyways.
1. This all started after i flashed RRE 5.2 RC3. Initially after a successful flash everything seem normal and fine. Then next morning i woke up to a frozen screen with many verticial lines running up and down the screen was almost unreadable. Initially i thought it was a bad flash or just random lock up. I did a hard reset and tried to enter the bootloader. Black screen, it does seem like the backlight is coming up but nothing on the screen. I can hear the phone power on and boot successfully into windows. Activesync connects i can browse the contents of the phone.
2. After flashing to stock att rom and stock htc roms same symptoms. So at this point i am thinking crap bad LCD screen. so I ordered both the digitizer and lcd screen for good measure. I replaced them hoping that a bad LCD was all. replaced both screens and i powered on the phone. same problem. black screen. The phone still powers on and boots into windows. Activesync still connects and i cna still reflash the phone.
3. I work extensively and do both desktop pc and notebook repair. I am not new to dealing with small electronic repairs. but at this juncture i am unable to identify the cause of hte malfunction. i am hoping maybe some of the gurus here might be able to shine some light on the subject.
Thanks in advance for any help.
I would have followed the same approach; your description makes it sound like it might be some kind of backlighting issue at first read. I'm inclined to think it might be a cold connection (bad connector) on the main board.
Silly question, what happens if you power up the phone with the keyboard exposed?
*EDIT* Not sure if you have been here yet: http://www.mikechannon.net/
Cheers,
i just tried to power up the phone with keyboard exposed. Powers up the same as with the keyboard hidden. Still boots up fine but black screen. I already have the service manuel dowloaded. i have checked around with several repair places both local and on the web. Seems like no one has any parts for the att fuze/touch pro gsm except for the lcd and digitizer and a speaker.
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable. i have contacted htc about doing a possible repair and they want wayyyy too much for just a main board repair almost $400 USD.
Anyone have a bricked/ non working touch pro they would like to sell ? =P
fkoong said:
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable.
Click to expand...
Click to collapse
Could be a bad ribbon cable ... and firmly pressing around the front/back of the unit shows no change?
pressing the phone front and back show no changes to display. in a very dark room I can see that there is light emitting from the display but its just the screen is not displaying anything visable. this occured both before and after i changed out the screens. I'll do another visual inspection of all the boards to see if there is any bad resistors burnt out circuits etc.. but i didn't notice anything mentionable during my first 2 inspections. Maybe 3rd time is the charm.
Thanks for all the feedback thus far Hilaireg it is quite appreciated. All this venting has at least made me feel 1000% better than after i replaced my lcd and still same problem at least i don't feel like a complete idiot!
Sorry I couldn't be of much help ... you've done all the steps a seasoned hardware person would do.
Do post back to let other folks know if you get it back up and running.
Cheers,
you have a pm fkoong.
I have possibly the same problem. Phone got wet, dried it out for 2 days (in a container of rice). Phone worked but had "water marks" on screen that disappeared after two days and everything was fine for about 2 weeks. Then one day (happened to be humid misting rain eve in Charleston) the screen is blank (hint of backlight only). A soft reset and it seems OK for about 1hr, then blank again. The hard resest screen displayed OK (readbale text etc), but didnt work. But as I write this, I retry to document it results correctly and the NATF ROM is reloading and the screen works! We will see how long!!
Well.. not that long, the end of the ROM load and it went blank again, seems like a video driver problem. The Press VoluP to boot does show some red artifact.
Trying hard reset again (No SIM no uSD)
The NATF v4.4 loads and gives me the Tap screen, Align Screen, stylus, loads customization, opera, tf3d, then loads a bunch of files under ...... and then the screen goes blank again, seem like what happened last time, so Ill try loading a fresh ROM copy... later
Has anyone encountered the following issues with their SHIELD?
Mine was working just fine after updating to 4.3 and rooting with CWM. I performed multiple reboots in this configuration, played games, etc. - everything was fine.
I had a pretty busy weekend so didn't touch the SHIELD at all for a few days. When I got back:
When I opened it up, I saw the screen backlight turn on but nothing displayed on the screen. The SHIELD button was glowing green.
I long-pressed the SHIELD button to turn off the device. When I turn it back on, I get a white screen that is dark around the edges (mostly vignetting around the corners). The brightness of the screen here and degree of vignetting seem to change every time I try and turn on the device.
If I enter fastboot mode via the key combo, the same thing happens - white vignetted screen. The device DOES appear to enumerate as a fastboot device on my PC in this configuration.
At one point I figured it might be due to a low battery, so plugged it into the charger. 30 minutes later, when I opened the lid, I actually came up to a launcher screen with 65% battery.
However, after closing the lid and reopening it again - black screen again, with the "white vignette of death" coming back if I reboot.
Has anyone else seen similar behavior? Searching results in no one complaining about a white screen like this, at least not on this device.
Screen of Death
This just happened to me today. Did you find a fix for this problem?
Entropy512 said:
Has anyone encountered the following issues with their SHIELD?
Mine was working just fine after updating to 4.3 and rooting with CWM. I performed multiple reboots in this configuration, played games, etc. - everything was fine.
I had a pretty busy weekend so didn't touch the SHIELD at all for a few days. When I got back:
When I opened it up, I saw the screen backlight turn on but nothing displayed on the screen. The SHIELD button was glowing green.
I long-pressed the SHIELD button to turn off the device. When I turn it back on, I get a white screen that is dark around the edges (mostly vignetting around the corners). The brightness of the screen here and degree of vignetting seem to change every time I try and turn on the device.
If I enter fastboot mode via the key combo, the same thing happens - white vignetted screen. The device DOES appear to enumerate as a fastboot device on my PC in this configuration.
At one point I figured it might be due to a low battery, so plugged it into the charger. 30 minutes later, when I opened the lid, I actually came up to a launcher screen with 65% battery.
However, after closing the lid and reopening it again - black screen again, with the "white vignette of death" coming back if I reboot.
Has anyone else seen similar behavior? Searching results in no one complaining about a white screen like this, at least not on this device.
Click to expand...
Click to collapse
Might be just bad luck for me.....
nmerc001 said:
This just happened to me today. Did you find a fix for this problem?
Click to expand...
Click to collapse
So ive already gotten two shields and they both got the same effect. my guess is the ribbon cable when you open and close the screen, is wearing off? because when i open my shield in a certain way, it works... when i open it at around 100 degrees or open correctly then tilt it forward, the screen tears and slowly shows the white screen. I do admit that i open and close the screen more than i should, but i do it carefully. Ill look over at the ifixit site to see how the cable is connected to the board.
This is what has me worried about buying a shield, the ribbon cable, did you confirmed this was the problem?
DJNinja1625 said:
So ive already gotten two shields and they both got the same effect. my guess is the ribbon cable when you open and close the screen, is wearing off? because when i open my shield in a certain way, it works... when i open it at around 100 degrees or open correctly then tilt it forward, the screen tears and slowly shows the white screen. I do admit that i open and close the screen more than i should, but i do it carefully. Ill look over at the ifixit site to see how the cable is connected to the board.
Click to expand...
Click to collapse
I am a tech by trade and bought one of ebay for 40 bucks cuz it would not power up so the guy claimed. After getting it I found the issue was actually the display was not coming on and once it did. Then went out in a few moments. Connect it to HDMI and the unit runs all day of you want to be cabled. ]
So I tore it down and found that the issue is the flex cable. The problem is that the flex cable is part of the LCD and you cannot just replace the cable. Also since the unit is so new there are no sources as of yet to by the LCD from.
So if you have this issue I suggest just holding out till a source of LCD's at hopefully a reasonable price become available.
So it's soldered to the screen and not replacable right?
nex86 said:
So it's soldered to the screen and not replacable right?
Click to expand...
Click to collapse
That is correct.. The flex cable is actually an integral part of the display and even has much of the driver circuitry placed right on it at the LCD. In the business we call it a flex circuit since it is a flexible circuit board and not just a cable.
I pretty much know what you mean.
On my old Archos Gamepad I ripped the flex that connected the left side of the controler to the logic board by accident.
It was a pain in the ass to fix it by soldering seperate wires, I guess it's impossible to do this with the display connection in the Shield.
nex86 said:
I pretty much know what you mean.
On my old Archos Gamepad I ripped the flex that connected the left side of the controler to the logic board by accident.
It was a pain in the ass to fix it by soldering seperate wires, I guess it's impossible to do this with the display connection in the Shield.
Click to expand...
Click to collapse
Might be possible if you used 32 gauge magnet wire. It is enamel coated so it won't short, but it to will break over time.
hi, flash factory image
Sent from my LT25i using XDA Free mobile app
dragxdk said:
hi, flash factory image
Sent from my LT25i using XDA Free mobile app
Click to expand...
Click to collapse
How are you supposed to flash a factory image when the screen won't let you see what you are doing? When you are in the bootloader screen the HDMI drivers are not loaded yet so not even hooking it to an external monitor will work. You might want to fully read and understand the problem next time before offering advice.:good:
fastboot tells you if you were sucessful or not.
just for relocking the bootloader you have to do some button combinations, you can look up some tutorial videos to see what you have to press.
nex86 said:
fastboot tells you if you were sucessful or not.
just for relocking the bootloader you have to do some button combinations, you can look up some tutorial videos to see what you have to press.
Click to expand...
Click to collapse
Even still, it is not a software problem that causes this. I know because if I move my display to a certain angle it will start to work sometimes. A software issue would not cause this. I also have taken my apart since I am a tech and can actually see the traces in the flex cable that have broken..
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Solarenemy68 said:
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Click to expand...
Click to collapse
I agree, they used flex in the Nintendo DS and 3Ds as well, but they don't break that fast.
I find it still better if they have used recular cables like what they use for Laptops.
Solarenemy68 said:
Even still, it is not a software problem that causes this. I know because if I move my display to a certain angle it will start to work sometimes. A software issue would not cause this. I also have taken my apart since I am a tech and can actually see the traces in the flex cable that have broken..
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Click to expand...
Click to collapse
What you are saying is the EXACT same thing that happened to my SHIELD. I can tell its a hardware problem because when I tilted my screen it would work, and sometimes it wouldn't. Now my SHIELD's display does not even show any signs of picture. HDMI still works, however. Like one of the previous posts said, there is not a screen available for purchase, so my next step is NVIDIA customer support. Maybe if they would sell these screens, I wouldn't even have to have a warranty claim. sigh.
White screen of death?
yes mine too same as
i tried connecting my via HDMI from power cable to large HDMI to plug it works fine on my galaxy tab
thought id be clever try it on nvidia shield never worked sould of bought mini HDMI so now White screen of death
i cant get into recovery or anything i had this on charge for 12 hrs yesterday still no green button on charge only orange .. i too cant find anything on internet to help with this White screen of death situation
Solarenemy68 said:
How are you supposed to flash a factory image when the screen won't let you see what you are doing? When you are in the bootloader screen the HDMI drivers are not loaded yet so not even hooking it to an external monitor will work. You might want to fully read and understand the problem next time before offering advice.:good:
Click to expand...
Click to collapse
This. I'm having a similar issue. My wife's SHIELD has an unresponsive touch screen. So I tried to flash the factory image (It was never rooted to begin with) and I got the white screen issue when in the bootloader screen. I have to keep restarting it to get the screen to show up as normal when the device boots to the home screen. But the bootloader screen is still blank and white. I was able to watch a video and mimick the steps to flash the factory image but that did not fix the issue. It's definitely a hardware issue. I live in Cincinnati OH, anywhere I can go to have this fixed? I have a portable myself and i know this is going to happen to mine soon.
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
jono_nz said:
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
Click to expand...
Click to collapse
Only time I've seen something like this was when my integrated graphics card on my desktop overheated, everything still worked, but colorful static everywhere. I'd let it cool down for a while, chances are it was pretty hot when it did that, and see if high temps might make it happen again.
I just had the same thing happen. Phone had been in my pocket and I had just taken it out to check the time maybe 10 minutes before it happened. The only difference with mine was I bumped into a table and hit the phone in my pocket. It does have a case on it and there is no sign of damage at all such as a cracked screen or anything. The static only lasts for a few seconds and thats right after I force it to reboot. After that it just goes to an all black screen. My LED indicator light is still flashing at me telling me I have an email though so I'm not sure what the deal is.
Were you able to resolve this issue? I too just experienced this issue as well and my phone is currently unusable. Thanks!
Do a full wipe as in wiping the entire phone and making it as if you just got it out of the box. if it persist RMA
Sent from my Nexus 5
Hi, I broke my screen (really bad smash) and had have this static on my new screen. The new screen was apparently fully tested. When using the slim port i can display on my TV and the digitizer works fine, its just this same colour static on the handset. I am now waiting for a replacement USB flex (it was a bit bent in the break) and i expect the new USB flex will fix it. If not then its a bad screen.
Will post the results when i get the parts
Fixed!
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
zeebo1111 said:
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
Click to expand...
Click to collapse
Hi,
sorry for reopen the topic but I really need to know if change de USB flex solve this problem
thanks
Static screen and freezing
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Madzy said:
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Click to expand...
Click to collapse
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
nexus565 said:
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
Click to expand...
Click to collapse
Most likely the flex cable
ふかつどう
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
bullorbear said:
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
Click to expand...
Click to collapse
Looks like the daydream function. You can turn it off in Settings>Display>Daydream
Sent from my Nexus 5 Unchained using XDA Free mobile app
Same thing, Screen now black. Won't turn on...
Hey everyone, I know that this is kind of late to the thread, but I have what I believe is the same problem as everybody else here. I had my Nexus 5 in my pocket for maybe five minutes, and in between the times that I put it in my pocket and took it out again to reply to a text, the screen went all colorful and static on me (Red tint, almost as if I had twilight on, but I didn't). I tapped the back, and the colors went back to normal, but the digitizer wasn't responding to touch. Then, It went black. No color, the speakers weren't working, neither was the backlight on the display. I took it apart, and figured its either the USB flex cable (which looked frayed), or the mainboard. If its the USB flex cable, then I know I can repair it. If it's the mainboard... well, as a sixteen year-old who has no current source of income, I'm out of a $400 phone.
Pictures attatched. Thanks!
rikudo said:
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Click to expand...
Click to collapse
I took the phone the LG service center and the technician seemed to know this issue and immediately said that the USB flex cable needs to be changed. The entire fix took about 5 mins and the phone is working fine since then.
Sorry for the delayed response.
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
pezkiln said:
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
Click to expand...
Click to collapse
Hey man, did you ever try this out and get it to work? I have the same problem and was thinking of trying this out but wanted confirmation first.
Thanks!
Just wanted to post here to say that this thread just saved me a lot of money!
Had the same issue (static showing on the screen). Local phone repair shop told me it needed a new screen, without even looking at it(!), and it would be £120 + labour. Told them I would think about it, and came home and did some more research, found this thread. Ordered a replacement USB flex cable from eBay, and fit it by following a YouTube tutorial, and now the phone is back working fine. brilliant!
Thanks xda!
I had a problem where my screen looked like an old CRT TV with particles flashing all over on anything with a static dark background. Any ideas
Hey All,
I posted this over on r/nexus5 as well, but figured id see if anyone here had any ideas as well.
I replaced my screen/frame earlier today and started having some trouble, figured I'd see if anyone else has had a similar experience and can give some advice.
I replaced my screen about a year ago, and all was well until a month ago. Dropped it again and cracked the screen, so I ordered another. Decided to spice things up and get a red frame as well, so this afternoon I took it apart. Tore it all down, and moved all the parts over to the new frame, everything went over nice and easy, and I got it all about together and booted it up. I see the Google logo with the unlock symbol, hangs out for about 15 seconds, and then reboots. Will do this for a bit until I power it down.
I read some other threads with some similar symptoms. A few people suggested the power button was being held down and causing the reboot, but that isnt the case here. I can get into the boot loader/fastboot screen, and can see it over adb. Soemone else suggested it was the long wide noddle cable not properly connected, so I've reseated that about a dozen times with no luck. I have checked all of my connections over a handful of times, but still the same deal.
So since my pc can see it in fastboot, I ran the nexus toolkit and did the force flash. Files transferred over and were written successfully, and as far as NRTK was concerned, it all went well. so it tells me the phone to reboot, and of course its the same 15seconds of google logo, rinse/repeat.
So I am thinking maybe my motherboard got damaged somehow during the transition? I just cant find any signs of damage, and I was pretty careful during the transfer. This was a replacement from China, but I figured since it shows the google logo and boot loader, the screen is indeed working... could it be the screen/digitizer preventing it from fully booting? I think its odd that root toolkit could still see the device, send data to it, and write it successfully.
Any thoughts would be much appreciated.
Actually now that I think about it, I will throw the guts back into the old frame in the morning to confirm if it is the new screen causing the problem or not.
So it turns out it was the chinese knock off screen that was the problem. put the guts back into my old phone, and all was well. Going to return it and get a new screen on the way.
Hi I have just bought an s7 which turned out to be a Korean G930L but I cant get any response out if it apart from the 2 bottom leds and and the blue one. No response from trying to get into recovery or download mode, basically a black screen though it does vibrate on what i think is start up. It is found by pc and Odin and charges ok, I can tell as I can see properties on pc. But no other response. Is it possible that the previous owner tried to root it using non korean rom or TWRP? Any advice on how to fix either getting TWRP on or screen to light up. I am sorry for being so vague I have pulled it apart and checked all of the connections, screen, motherboard etc but nothing. Odin sees the phone but I am not sure if I am in Download mode so wont flash, as cant see screen.
Or chuck it out or put back on eBay.
roscored1000 said:
Hi I have just bought an s7 which turned out to be a Korean G930L but I cant get any response out if it apart from the 2 bottom leds and and the blue one. No response from trying to get into recovery or download mode, basically a black screen though it does vibrate on what i think is start up. It is found by pc and Odin and charges ok, I can tell as I can see properties on pc. But no other response. Is it possible that the previous owner tried to root it using non korean rom or TWRP? Any advice on how to fix either getting TWRP on or screen to light up. I am sorry for being so vague I have pulled it apart and checked all of the connections, screen, motherboard etc but nothing. Odin sees the phone but I am not sure if I am in Download mode so wont flash, as cant see screen.
Or chuck it out or put back on eBay.
Click to expand...
Click to collapse
Your phone's display screen has a problem , sadly you have to replace the display screen. Go to the nearest samsung service center.
Thanks it isnt worth it I will just sell it on ebay. I have been able to get to some of the screens [though still black] as it talks to me in Korean and the screen is giving haptic feedback so aspects of it are alive still. I am wondering now if someone has tried to ROOT it and semi bricked it or turned off the display internally. The other night night no matter what I pushed it vibrated and answered me with the same korean statement. I am trying to get into Recovery Mode without a screen and flash it without a screen but proving frustrating, maybe samsung dealer can reflash it with needing a screen.
roscored1000 said:
Thanks it isnt worth it I will just sell it on ebay. I have been able to get to some of the screens [though still black] as it talks to me in Korean and the screen is giving haptic feedback so aspects of it are alive still. I am wondering now if someone has tried to ROOT it and semi bricked it or turned off the display internally. The other night night no matter what I pushed it vibrated and answered me with the same korean statement. I am trying to get into Recovery Mode without a screen and flash it without a screen but proving frustrating, maybe samsung dealer can reflash it with needing a screen.
Click to expand...
Click to collapse
It's not a software issue, there must be water damage or display is broken/went off for some other reason.
I had this same issue with my note 5, I was able to hear everything, touch key and notification lights were on too, that time my note 5 was accidentally dropped by me. So 99% your display is broken. Simply go to service center and get a quote, but display will cost same as used s7. Try to get after market screen.
ok thanks for the advice, i will head to them after the xmas break