-Yesterday I created a grey theme using advance config.
-[color code #FFD0D0D0]
-I forget to enter the theme setting using the advance config.
-I just back to the start menu and open Setting->Theme
Know Problem:
-The theme setting crushed
when i press the theme it go back to the setting app
the description of the theme setting is blanked
-All the 3rd party app have the same problem with the theme setting
they exit automatically after i chick them
-All the 3rd party app in the setting app have the same problem too
-the phone cannot connect to the computer which i can do it normally before this
=That mean i cannot fix the problem with advance config or register
System info. :
-HD7
-deepshining v6.5
-build 7.10.8107
-advance config v5
-using htc accent before
-poor English and i apologize if i behave rude=]
1) Did you turn phone off and on?
2) If so, then try pulling battery for 30 seconds and put back and turn on
3) If all else fails, do a hard reset and start over.
LiFePo4 said:
1) Did you turn phone off and on?
2) If so, then try pulling battery for 30 seconds and put back and turn on
3) If all else fails, do a hard reset and start over.
Click to expand...
Click to collapse
May I ask what is the solution for
I want to ask for the solution about how to delete the error accent so that i can use my phone normally again
=]
I think the connection will become normal again after i can fix the crush of the theme setting
Moreover i really dont want to do a hard reset as it is pity
anyway thanks for your reply=]
I have tried a lot to do what you need but actually it's not possbile since you cannot access any third party app (i.e. RegEdit) or settings.
The only thing you can do is hard reset.
jdbastardy said:
I have tried a lot to do what you need but actually it's not possbile since you cannot access any third party app (i.e. RegEdit) or settings.
The only thing you can do is hard reset.
Click to expand...
Click to collapse
Never mind=[
I am just hoping that anyone have ever had this problem
I ll hard reset it then
thanks for your answer=]
Related
So I`m new here and if my thread is not on the right place - sorry. And here it is my problem:
I`m using Widgetsoid Switcher Widget and have this very annoying problem that when i turn on something it not works (For example: I turn on my data service, widget indicates that it`s turned on but actually it's not. If I turned it on from the Settings menu the widget indicates it`s turned on and when I stop it from the widget it doesn`t stop). Same with WiFi and GPS... This thing is freaking me out so if somebody can help me it would be great or if you can tell me other app like that one with options for customization. Thanks in advance
Can`t somebody help me?
podmatrix said:
Can`t somebody help me?
Click to expand...
Click to collapse
Hi,
Try to uninstall, install and reboot directly after install (it's important!).
After go to global preferences and check "Disable all apn"
Create your widgets and it will be ok.
Now everythings is fine but Data Service still doesnt't work... Any ideas?
data toggle help
i had the same problem with the data/3g toggle on my htc evo. what you have to do is go to "settings->wireless & networks->then scroll down and make sure there is a check mark in the "mobile network" setting" in order for the widget to control it the setting must first be enabled. it took me and the dev 3 days to find this out.
also if that doesn't work go into the app itself and as soon as it opens it you should see something at the top that says data toggle mode. make sure that setting is set to "APN toggle" and not "APN rename"
hope this helps. remember to rep if it did
Thanks man
No problem
Sent from my PC36100 using XDA App
I had a similar problem today, it looks like the data switch in Widgetsoid places a dash in front of your AccessPoint name in order to block data transfer and removes that dash when you click switch again.
After messing with Widget I was not able to connect to net, I installed, uninstalled, etc, and then I noticed that APN list was empty, I had to add the APN again and restart it, I think (as said above) that you need the data to be ON then do a restart in order for Widgetsoid to properly read the status.
If you're rooted, use the new "root method" to toggle data. It doesn't mess with your APN & it works flawlessly for me. It's the first time I've had a data toggle that actually works.
A simple method
FIX = Settings>Location & Security>Select Device Administrators> *Uncheck Widgetsoid
Uninstalled
Thanks to: mr.noobsalot
I know this is an old thread, but where is the global preferences on version 3.4.1 it doesnt appear when I click apply.
Im using a HTC sensation and ICS.
Thanks
bump
euqiddis said:
bump
Click to expand...
Click to collapse
Stay FAR away from Widgetsoid. It can slow a Galaxy S5 down to a Crawl. Your Dialer will not function, Your phone will not respond. Its trying to load your phone with Ads or something and keeps your CPU busy, whether its a dual core or quad doesn't matter. Developer does not respond and does not seem to care. After uninstalling this App, the phone feels "new" again.
I believe this app is some type of Spyware/Malware combo. Why does it need access to my Contacts? Something very fishy and the developer never responds. It's a great Widget when it works but certain things about it don't seem right. Uninstalled!
Hi,
I tried to remap my Jovi button using the button remapper app but it stops working after a while. I have it locked in recent apps, set up as an exception in battery saver, I even ADB uninstalled the i Manager app but without success. Then I figured out my accessibility keeps resetting from on to off for all apps (not just the button remapper). Do you have any ideas how to stop it from doing so?
P.S. I don't think factory reset will help as this was the problem from the very beginning, before any modifications were made.
Thanks a lot!
I've had the exact same issues but have no idea why it's happening.
Also, from the sounds of things, a number of other people have had similar problems in the thread explaining how to re-map the button.
Same issue here. Except with Nova Launcher. Accessibility keeps turning off.
still no soultion for this issue? im getting frust already. huh
smolkomartin1 said:
Hi,
I tried to remap my Jovi button using the button remapper app but it stops working after a while. I have it locked in recent apps, set up as an exception in battery saver, I even ADB uninstalled the i Manager app but without success. Then I figured out my accessibility keeps resetting from on to off for all apps (not just the button remapper). Do you have any ideas how to stop it from doing so?
P.S. I don't think factory reset will help as this was the problem from the very beginning, before any modifications were made.
Thanks a lot!
Click to expand...
Click to collapse
I fond a solution for the accessibility issue
STEPS
1. Open the app enable accessibility
2. Go to the recent apps menu and block it (with the lock)
3. Then reboot and DO NOT CLOSE IT BEFORE U REBOOT
4. When you boot up you will see in the recent apps menu the app will be not there and your good to go
TheFirestoneHD said:
I fond a solution for the accessibility issue
STEPS
1. Open the app enable accessibility
2. Go to the recent apps menu and block it (with the lock)
3. Then reboot and DO NOT CLOSE IT BEFORE U REBOOT
4. When you boot up you will see in the recent apps menu the app will be not there and your good to go
Click to expand...
Click to collapse
This is awesome ! works like a charm, thanks a lot !!!
TheFirestoneHD said:
I fond a solution for the accessibility issue
STEPS
1. Open the app enable accessibility
2. Go to the recent apps menu and block it (with the lock)
3. Then reboot and DO NOT CLOSE IT BEFORE U REBOOT
4. When you boot up you will see in the recent apps menu the app will be not there and your good to go
Click to expand...
Click to collapse
don´t work for me, please can you explain little more detailed my accessibility keeps resetting every day 2 times and i need to restart my phone to get the apps who needs accessibility started again. this and notification trouble are my only problem with the phone its horrible. i get used to the funtouch os theme don´t bother me any more.
Hello,
I have some troubling issues with my "newly"-acquired phone. The previous owner has sold me a mildly used S7 with latest Oreo update, all stock, no tampering whatsoever.
However, either it's just me or I can't figure out some basic things:
1) Can't find homescreen buttons settings (i.e. Menu and Back button) for backlight.
2) Front LED indicator doesn't work with FB/Messenger/etc notifications - it does work when the phone is charging/is charged. Tried *#0*#, it works just fine.
3) App "bubbles" also doesn't work for me. While Messenger seemingly shows missed messaged, FB app still refuses to show any notifications.
Anyone got idea? I could try factory reset, but it already was reseted when I got it.
I could try to flash the rom with different carrier, but I seriously doubt it can solve such problems.
Thanks in advance!
groubal said:
Hello,
I have some troubling issues with my "newly"-acquired phone. The previous owner has sold me a mildly used S7 with latest Oreo update, all stock, no tampering whatsoever.
However, either it's just me or I can't figure out some basic things:
1) Can't find homescreen buttons settings (i.e. Menu and Back button) for backlight.
2) Front LED indicator doesn't work with FB/Messenger/etc notifications - it does work when the phone is charging/is charged. Tried *#0*#, it works just fine.
3) App "bubbles" also doesn't work for me. While Messenger seemingly shows missed messaged, FB app still refuses to show any notifications.
Anyone got idea? I could try factory reset, but it already was reseted when I got it.
I could try to flash the rom with different carrier, but I seriously doubt it can solve such problems.
Thanks in advance!
Click to expand...
Click to collapse
1. Long press on blank part of home screen to access home screen settings. Stock doesn't give the option to adjust back light for menu and back button. A third party launcher does like Nova Launcher.
2 settings >notifications >advanced, find Facebook app and enable
Also app icon badges in home screen settings
3. As above
cooltt said:
1. Long press on blank part of home screen to access home screen settings. Stock doesn't give the option to adjust back light for menu and back button. A third party launcher does like Nova Launcher.
2 settings >notifications >advanced, find Facebook app and enable
Also app icon badges in home screen settings
3. As above
Click to expand...
Click to collapse
1) Thanks but for basic thing like adjusting backlight, I don't wanna use any third party app, for what should be already in phone. My Galaxy W had it, My S5 mini had it too, this is just stupid.
2) All notifications are enabled, all badges are enabled too. I tried turning them off, getting some notification and turning them on. Worked in 1 outta 20 tries, ergo - I got it all enabled permanently and it still won't work.
3) As above
I can successfully run widgetupdatet and musicproxy on my uis7862 unit.
But I think i need to make it start at boot/wakeup and also make it not battery optimized
So for start at boot/wake up, i turn it on with User - application. But this make widgetupdater app show up everytime when unit boot up, which i prefer it to hidden
For battery optimized setting, I don't have battery option from my setting menu.
May I have your advice on this?
@KёniG
Thanks
Hello.
The newest firmware doesn't have battery settings. Install this https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut and find "Settings suggestions". Launch it and type in the search field "Battery".
KёniG said:
Hello.
The newest firmware doesn't have battery settings. Install this https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut and find "Settings suggestions". Launch it and type in the search field "Battery".
Click to expand...
Click to collapse
cool, thanks. Let me try this app on my unit for battery setup part
May I know how about the startup part, anyway I can make the app screen do not popup and make a more silent startup?
(for my firmware, I can make app startup automatically in settings -> user -> application settings
Thanks again
@KёniG
I've switched to paid version and turn on "silent start" seems it will just flash then go away which is good now.
However I don't find the way to open the app to change settings anymore (don't see the icon at notification menu) . need to wipe out the app data to get back to setting screen
jasonwong28 said:
May I know how about the startup part
Click to expand...
Click to collapse
My answer above is about silent start up.
If you have the restricted notification bar it is required to reinstall the app to enter settings. Silent mode is not appropriate way for you.
KёniG said:
My answer above is about silent start up.
If you have the restricted notification bar it is required to reinstall the app to enter settings. Silent mode is not appropriate way for you.
Click to expand...
Click to collapse
Thanks, so either I can still choose silent startup but need to reinstall app if i need to change settings
Or
I dont make it silent startup but i will see the setting screen everytime the unit starts?
and one last thing
After I use musicproxy+widgetupdater. When I use my wheel button - "mode" to change the source, it will go through radio, Phone, Bluetooth music, then my specified music player, then stopped if i press "mode" again. Originally, the next app is the map and then loop back to radio. Is it normal behaviour?
Thank you so much
Played a bit more, seems AIMP is working fine to loop the button cycle.
Your problem got solved?
SamWarner01 said:
Your problem got solved?
Click to expand...
Click to collapse
silent startup still make the app no longer configurable but is ok as I don't think need to always configure that often.
For wheel button issue, I find out is my specific app (KKBox) issue. If I change to AIMP or another music app then is working fine to cycle the sources.
And i think a setting which is quite useful for me is "Multiple music app" which will show current playing app info in that widget area
So I turned off Miui Optimization because I wanted the always on display to always been on (apparently if you disabled Miui Optimization, it wouldn't turn off after 10 seconds). It worked, but I lost some things like the haptic vibration or the Gaussian blur of the interface. I need help, I enabled Miui Optimization again but it didn't fix it (I restarted my cellphone more than 5 times). I don't know what to do and I'm not able to find a solution.
Disable battery saver then restart the phone
Michael P. said:
Disable battery saver then restart the phone
Click to expand...
Click to collapse
Y completely did. Trust me, I did everything; I also check for similar bugs on YouTube and it didn't work. Suddenly I just woke up and it started working again... I'm not understanding, but we'll. Anyways, thanks!
Karlosx2Z said:
So I turned off Miui Optimization because I wanted the always on display to always been on (apparently if you disabled Miui Optimization, it wouldn't turn off after 10 seconds). It worked, but I lost some things like the haptic vibration or the Gaussian blur of the interface. I need help, I enabled Miui Optimization again but it didn't fix it (I restarted my cellphone more than 5 times). I don't know what to do and I'm not able to find a solution.
Click to expand...
Click to collapse
Did you able to find the solution for this issue? I got this issue two times and everytime I had to reset. Funny thing is that there was also a dark mode glitch as well. Although, everything gets normal while charging the phone... Seriously, MIUI is annoying as hell.
Darkstaranku said:
Did you able to find the solution for this issue? I got this issue two times and everytime I had to reset. Funny thing is that there was also a dark mode glitch as well. Although, everything gets normal while charging the phone... Seriously, MIUI is annoying as hell.
Click to expand...
Click to collapse
Yeah, I was able to find a solution for it. I suffered the same thing you have, phone was back to normal when I plugged the cable to charge it. I installed an app called "Hidden Settings (if you search it on the play store as "Hidden Settings Miui" it'll appear on there). Open the app and go to "hidden" at the bottom of the interface, then search for the battery options and its gonna be one of those 4 options.
In my case, the problem was with the second battery option. It was enabled and I had to disable it, then it started working like nothing happened.
I hope you can fix it, if you need help just answer this saying it.
Karlosx2Z said:
Yeah, I was able to find a solution for it. I suffered the same thing you have, phone was back to normal when I plugged the cable to charge it. I installed an app called "Hidden Settings (if you search it on the play store as "Hidden Settings Miui" it'll appear on there). Open the app and go to "hidden" at the bottom of the interface, then search for the battery options and its gonna be one of those 4 options.
In my case, the problem was with the second battery option. It was enabled and I had to disable it, then it started working like nothing happened.
I hope you can fix it, if you need help just answer this saying it.
Click to expand...
Click to collapse
Thank you so much for replying and your help buddy. I had to reset everytime because of that bug and eventually decided not to turn off MIUI optimizations. BTW Did it work while MIUI optimization was off?
Darkstaranku said:
Thank you so much for replying and your help buddy. I had to reset everytime because of that bug and eventually decided not to turn off MIUI optimizations. BTW Did it work while MIUI optimization was off?
Click to expand...
Click to collapse
tbh I didn't try it with the Miui optimization off, but I think that if you disable the battery optimizations I told you before; it should work fine even with Miui optimization turned off. You can try it, you do know how to fix those "bugs" if they happen again so you'll not lose anything.