Hello Fellow Forum members
i am getting a error message in Advanced Config and other apps like this
when i open it i get a message saying Win33Exception.
what does this mean and how can i fix it
Did you do any kind of unlock on the device?
If not, i suggest the InterOp Unlock,
visit the site http://windowsphonehacker.com/windowbreak On your mobile device.
Umm... he couldn't even have installed the XAP without interop-unlock, unless he modified it prior to deploying.
OP, I suggest you go look on the TouchXperience forum. Make sure you have the latest version, and see if other people have had and fixed the same problem. I'm pretty sure the author of the TouchXperience apps (including Advanced Config) - goes by schaps - is a member of XDA-Devs, but he's not active over here.
For what it's worth, I haven't seen that particular error out of Advanced Config in a really long time. I remember it used to happen, but I don't recall why, or when it stopped. Odds are, your version is just out of date. Without more info (and schaps didn't seem inclined to include useful error messges in his apps) I can't help you more.
Related
Hi, I recently bought an Omnia and decided I would have a go at writting my own JavaME applications for it.
The application that I have in mind requires access to the file system and, in the future, the ability to make HTTP connections. Since these parts of the API are restricted I added file read and write privilages to the JAD file and copied the JAD and JAR to my phone. When I tried to install the application it gave me the error message "error 910: application authorization failed".
I guessed the error was due to the fact that the code wasn't signed. I don't want to have to go to the expense of getting a real trusted certificate for a piece of code I will probably never release so I've set up my own root CA and installed the CA certificate on the phone. I then created my own code signing certificate and signed my applicaiton with it*. I now get the error message:
"The authentication of certificate is failed. Contact your application provider to correct this situation"
when I try to install my application. I think, therefore, that the code is signed but for some reason the trust chain isn't working. I can't tell if my code signing certificate is the problem or whether the phone isn't recognizing my CA certificate. The CA certificate shows up fine in the Certificates application (Settings > System > Certificates).
Is what I am trying to do even possible on the Omnia or is is too locked down? I have to assume it is possible as I can't believe that every devopler that wants to test their MIDlet idea is buying a certificate. Out of interest does anyone know what KVM the Omnia is using?
One option I haven't tried yet is installing JBed as described in this post (http://forum.vodafone.co.uk/index.php?showtopic=8896). I'm not exactly thrilled by this idea though as I have a nicely working (recently flashed to the latest version) phone at the moment.
Any help greatly appreciated (and if I get it working I'll write it up so others can use the information).
* Personal CA Setup Etc...
http://browndrf.blogspot.com/
http://www.mobilefish.com/tutorials/java/j...de_keytool.html
http://www.mobilefish.com/developer/openss...gn_request.html
As a follow up. Perhaps it's not possible to install a MIDlet using a self signed certificate but what about the posibility of turning the security checking off for the MIDlet manager on the Omnia.
There is a menu option for java settings which doesn't provide any useful settings (just something about the backlight) but there is also an appilcation menu which has an entry called permissions. The permissions options is always greyed out though. I wonder if this could be turned on via the registry or somthing?
Not sure whether it works in your case (haven't tested this on the Omnia): see my related bible: http://forum.xda-developers.com/showthread.php?t=339579
Cheers Menneisyys, great article btw, I had a read of it before posting. From what I've read most phones seem have some way of getting unsigned MIDlets running fairly eaisly. Looks like this phone is the exception to the rule.
I think I'll have to just give up and install JBed unless someone can come up with any ideas. Your article seems to imply it's a pretty simple and painless process to have more than one MIDlet manager running on the same phone (before reading the article I assumed you could only have one on a phone).
I've been a Java developer for years (server side) but this is my first foray into JavaME, I should have guessed that the security system would make it more trouble that it was worth!
I am absolutely new to ROM cooking stuff, I searched the Q & A section but did not find any thread related to the topics I was interested to know:
1. I want to incorporate certain registry tweaks in my ROM, which is somehow getting over written (to be exact I want to turn off all plugins except Home Screen plus plus clock ui and quick launcher). I have exported the registry settings and tried to incorporate in the ROM, but somehow they are getting over written. I want to know is there any way I can make a particular package (in this case my tweaks) get compiled into the ROM last, so that whatever I define there don't get over written.
2. I have found some great freeware like the finger friendly keyboard in this forum, when I try to integrate them into my ROM using Package Creator 5.4, it gives error saying duplicate files. however upon viewing the cab, I saw that the file names may be same, but they are placed in different folders , what is the way to do it.
Can some one help me out?
BTW I do not use any kitchen and I am talking about building for my Gene.
Thanks for the help.
No one wants to share his/her knowledge? Wow
Is there any YouTube video or forum or something that will teach me how to edit my registry I have wp7 hd7 thanks
I seriously question the logic of anybody who needs to ask a forum for a "YouTube video or forum or something" instead of just entering some terms into your preferred search engine asking for this. You're trying to do something quite delicate and potentially destructive, although typically registry editing can be undone with a hard reboot if you screw up. That said, yes, it's possible.
First, you need developer unlock. There's a number of ways to get it. I personally have an apphub (developer) account, but Chevronwp7 labs is cheaper unless you're a student.
Second, you need to either be on pre-Mango (anything up to 7403 will work) or be interop-unlocked. I'm not going to go into the details of how to interop-unlock an HD7, but it's possible; I did it. There are instructions on the Development and Hacking sub-forum, along with an app (U2M7720).
Third, install any of the very large number of apps that can do registry editing. The standard one is the very obscurely-named "Registry Editor" app by schaps on http://touchxperience.com. If you'r enot on Mango yet, you can also grab Advanced Explorer from Codeplex; it gives registry and filesystem access in the same app but was never updated for mango.
I want to download a FREE application (Orange Cineday & Orange et Moi) in section "Orange" ... but i can't show it !
Have you a soluce to do please ... or just give me a soluce to have the GUID of these apps ?
Thankx,
Poloche,
If your phone is for some reason not showing the carrier marketplace, it may be possible to get it to appear using a XAP similar to the OEM Marketplaces XPs (see my signature). It'll require a little investigation, and the file that specifies MO marketplaces is a slightly than the one for OEM marketplaces, but it's not that complex.
If you'll read through the thread, you'll find enough info to get started yourself.
@GoodDayToDie Can you make XAP for different carriers (similar to the OEM XAP you made so far)? I have 2 Samsung Focus on Tmobile network but couldn't see the carrier marketplace. Thanks!
Also, now that an Omnia W ROM is available, can you look into why Call Blocking is not working on 1st gen Samsung devices? The newest Call Blocking app version is 1.8 from Marketplace.
@nepi: The MO marketplaces typically don't have their own section, but "ought" to load automatically on the phone. If you're on TMO-US, even if the phone wasn't originally TMO-branded, do a search in the Marketplace for "Family Room" or "T-Mobile TV". If they don't show up, then you can't access the TMO-US marketplace. I guess I can make a XAP for that one easily enough (it's my carrier, so I just pull the the relevant file off my phone, package it into a XAP, and post it). Honestly though, the only TMO-US app that I've found worth having at all is My Account, and that rarely (and it wouldn't be useful to anybody not on TMO).
Call Blocking (and the other gen2-specific Samsung apps) can't be used on gen1 phones pretty much by design. Samsung changed the drivers in their firmware that apps (both official and homebrew) with ID_CAP_INTEROPSERVICES use to do things outside their sandbox (call blocking is definitley not allowed from within the sandbox!). Some (but not all) of the gen1 apps are compatible with a backward-compatiblity interface in the gen2 firmware, but the gen2 apps are never going to be compatible with gen1 until/unless those new drivers are back-ported. That's not something we can do (at least, not until the Samsung bootloader is unlocked) ourselves, because the drivers are baked into the ROM, and nobody has yet figured out how to make a driver that's not in the ROM work.
I have a few theories, but it'll be some time before I can do anything with them. They're related to my current project, which is executing native homebrew EXEs on WP7 (specifically, I'm currently looking at modifying the Policy system to allow this). It may be that the Policy system is also behind the driver issue, but until I manage to modify the policies, that's a moot point.
poloche said:
I want to download a FREE application (Orange Cineday & Orange et Moi) in section "Orange" ... but i can't show it !
Have you a soluce to do please ... or just give me a soluce to have the GUID of these apps ?
Click to expand...
Click to collapse
- Install WireShark traffic sniffer
- "Reverse tether" your phone to PC (connect via USB cable)
- Start WireShark to listen http traffic
- Install these apps on your phone
Post whole request data here and I'll answer your question
I want to download "Orange Cineday" specific ORANGE Marketplace... Can you please give me the GUID ?
@GoodDayToDie
Please, explain me the registry key to show the "Orange Section" in my phone ? ... I have an interOP-Unlock Omia 7
Please read the OEM Marketplace XAPs thread (linked in my sig). The file that needs to be replaced is different from the one those XAPs replace (OEM market, you need the MO market) but it's stored in the same location and the structure of the file is similar.
I don't know what the identifier for ORANGE is, although "ORANGE" would be a decent thing to try! This is a pretty basic hack, requiring mostly just some time to experiment; give it a shot yourself. I prefer to use 7-Zip for modifying the XAP files, as it handles the path traversal nicely.
@GoodDayToDie: I'm in Seatte, too. The first day when I carrier unlocked my Focus and put in T-mobile SIM I saw the T-mobile My Account app on the Marketplace. However, after I reset the phone it's no longer there and I can't find it again. Can you post the appID for My Account app here? I want that app to check account status, etc.
Also, here is the app ID for Call Blocking version 1.8 from marketplace. I can't post direct link because of my poor post count. I just post this incase anyone wants to download it but can't find it in the marketplace. (I can see the app when the link is opened in my Focus but no option to install it "Not compatible with your phone..etc...")
Call Blocking version 1.8: appID=e23ef9a7-e785-4fc6-ab6c-500034b5226d
in windows mobile it is possible thru such apps as advanced configuration
where the radios will auto off when the phone idles for a xx period of time and will turn back on once the phone becomes active
i like to know if anyone knows how to do it on a windows phone
http://www.freewarepocketpc.net/ppc-download-advanced-configuration-tool.html
there is a place for Q's, you should use it.
Why did you not link to the original site? @schaps of TouchXperience, the same guy who wrote Advanced Config. for WP7, wrote the WinMo version. It has a forum and everything, even...
What you're asking for *might* be possible using SetDevicePower, although it may require an interop-unlocked phone. I'm not sure if the background agents are "smart" enough to detect idle time in this way.
Also, seriously, post in the correct section. You've been here easily long enough to know better.
Thread moved.. remember.. if you can tag it with [Q], it not not belong in a forum not including Q&A...
GoodDayToDie said:
Why did you not link to the original site? @schaps of TouchXperience, the same guy who wrote Advanced Config. for WP7, wrote the WinMo version. It has a forum and everything, even...
What you're asking for *might* be possible using SetDevicePower, although it may require an interop-unlocked phone. I'm not sure if the background agents are "smart" enough to detect idle time in this way.
Also, seriously, post in the correct section. You've been here easily long enough to know better.
Click to expand...
Click to collapse
i am on custom rom. is there anything in registry to edit?