[Solved]Stuck at white screen - Samsung Galaxy S (4G Model)

I'm trying to fix my brother's phone. He was running one of the GB Valhallas and then one day his baseband just disappeared. Considering that my Vibrant had the same issue once when flashing ICS, I just downloaded a CWM flashable modem thinking it would solve the problem. Nothing changed and the baseband still showed nothing so I downloaded a new rom, flashed it, it booted but the baseband was still nothing. So I tried to use heimdall to flash just the modem, it gave me some weird error, so I turned the phone off to try again and then that's when it just turned on with a blank white screen. I can't seem to get it into download mode or to even boot normally. Anything I can do? Is a jig my only option? Would that even work?
Any help at all would be appreciated. Thanks

Have you tried pulling the battery, plugging it into the usb able and the usb cable into the computer, then press the power button and volume buttons at the same to to get into download mode?
If you can do that, you can use the heimdall one click and completely reflash the phone.

yep I've tried that, I've tried every combo known to man. Just keeps coming up with a white screen

Sounds water damaged
Sent from my SGH-T959V using XDA App

Nope, the little thing in the back is still white, and he hasn't dropped it in water. :/
Sent from my SGH-T959 using XDA App

When it's on & plugged into the PC via the USB cable, does the.computer recognize it? Have you tried opening ODIN to see if it recognizes it? I'm just wondering if you're getting into a download mode but you just can't tell due to the white screen.
Sent from my SGH-T959V using xda premium

stephen_w said:
When it's on & plugged into the PC via the USB cable, does the.computer recognize it? Have you tried opening ODIN to see if it recognizes it? I'm just wondering if you're getting into a download mode but you just can't tell due to the white screen.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
If not that, then make a jtag and try that. Otherwise, if it is still under warranty, call samsung and do a repair ticket for it. Don't tell them you flashed anything to it. Say it just spontaneously happened...hehehe

stephen_w said:
When it's on & plugged into the PC via the USB cable, does the.computer recognize it? Have you tried opening ODIN to see if it recognizes it? I'm just wondering if you're getting into a download mode but you just can't tell due to the white screen.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I don't think so, I'm running Linux so I haven't tried odin, I guess I could dust off the windows partition and try it out. But when I tried flashing with heimdall it says:
Code:
Initialising connection...
Detecting device...
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke...
ERROR: Failed to open file ""
Re-attaching kernel driver...
Then it says flash successful (obviously not), and nothing happens.
thomas.raines said:
If not that, then make a jtag and try that. Otherwise, if it is still under warranty, call samsung and do a repair ticket for it. Don't tell them you flashed anything to it. Say it just spontaneously happened...hehehe
Click to expand...
Click to collapse
Is jtag same as a jig? And no it was refurbished when he got it and that was over 6 months ago, I don't know if it's still covered under any warranty. Otherwise I would have thought the same thing

Stick with Linux vs. Windows. ODIN is a pain in the rear for the most part. I assumed you were on Windows. My bad!
What about going to grab the Android SDK, extract it, find the tools directiory under the extracted archive, and execute 'android'. that should load the AVD manager software. When that executes, only select the Platform-Tools to download. When you have it, go into the platform-tools directory (at the same level as tools), and you'll have the Android Debug Bridge (adb).
Execute: ./adb reboot download
If that comes back without error, the phone should be in download mode (even if you can't tell). If that happens, go try to re-run Heimdall for the install.

stephen_w said:
Stick with Linux vs. Windows. ODIN is a pain in the rear for the most part. I assumed you were on Windows. My bad!
What about going to grab the Android SDK, extract it, find the tools directiory under the extracted archive, and execute 'android'. that should load the AVD manager software. When that executes, only select the Platform-Tools to download. When you have it, go into the platform-tools directory (at the same level as tools), and you'll have the Android Debug Bridge (adb).
Execute: ./adb reboot download
If that comes back without error, the phone should be in download mode (even if you can't tell). If that happens, go try to re-run Heimdall for the install.
Click to expand...
Click to collapse
Tried that too. It said there was no device found. :/ Tried getting it to connect but it wouldn't work.
It's a cold day in hell though because Windows actually worked. I went into it and after like half an hour of updates ... I was able to run odin and even though the screen stayed white it actually recognized it when I did the vol +/- hold! So you had the right idea the first time lol. Don't get why it wouldn't work with heimdall though.. Thanks!!

Weird! Glad you got it working though. Please update the title of the thread with [SOLVED] at the beginning.
Thanks!
Sent from my SGH-T959V using xda premium

Related

stock JF6

does anyone have the stock JF6 Rom without using ODIN?
is it possible to flash it using ROM Manager?
I dont have a 3 button combo and tried using Terminal Emulator to put
my cappy on download mode but my PC wont detect my Captivate.
i wanted to Flash Cognition Froyo on my cappy but cant seem to flash back to JF6.
Thanks in advance and delete this thread if its redundant.
What are you currently running?
Sent from me
im currently running JH7
jazua said:
im currently running JH7
Click to expand...
Click to collapse
You should be ok to flash cognition but without getting three button combo working flashing can get risky
What build are you on?
Look under battery, mine is 1008
Sent from me
we are the same... mine is 1008!
so is it ok to flash cognition 2.3b8?
but it is recommended to flash back to JF6
Please try this
pull bat, sim, and ext sd
Put bat back in, plug in usb while holding volume up and down
An orange android with a shovel should come on screen
Let me know if you could do this
You can disconnect usb, pull bat, turn phone back on to boot normal
Sent from me
still no luck... been trying every button combo on different threads but still no go.
i can make my cappy into download mode by terminal app using command
"reboot download" but my PC wont detect it.
You can flash cognition but I would try to figure this out first. You don't jump out a plane without a parachute.
Can you transfer files to and from your phone while on if you mount
Sent from me
Yes my cappy and PC communicates even kies recognizes my phone...
i can even transfer files easily.
only in download mode that my PC wont detect my cappy.
it says USB device not recognize...
Have you downloaded odin, have you tried different usb ports
Sent from me
Yes i tried One Click Odin and the 3 Button Fix odin3 v1.3
and still cant detect it when phone is on download mode.
Odin can detect it when cappy is on and usb is plug.
i tried different USB ports but still no luck.
Btw, thanks in advance for giving some time on my problem...
Not a problem. I think there its a way to run odin as an administrator, but sure if this would make a difference. I believe you have to right click on the program then select administrator. I know this had helped some
As I said you should be ok to flash cognition, but if something goes wrong odin is the safety net. Without it, a bad flash can screw you up, not to say you will have a bad flash
Sent from me
Try this, some one with the same our similar issue posted this elsewhere
TigerEnigma said:
Ok, this action enabled Windows to recognize the USB device and Odin opened the Com port.
Instead of plugging the USB to the computer first, I got the device in download mode, plugged in the USB cable to the device first, then plugged it into the USB port on the computer...picked it right up.
Note: It is an older model laptop...the USB ports on the back are USB 1.0. I have a USB 2.0 card installed on the side, worked through that.
Now I have to go find out why Odin3 One-Click is hanging up. There is a post for that
Regards,
TigerEnigma
Click to expand...
Click to collapse
Sent from me
Sent from me
I will give it a try and i will try on different pc and laptops.
Ill will post the result later.
http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+jf6
this odin always takes me back to jf6.....hope it helps
Try deleting/uninstalling ur usb drivers and then try going into download mode.
Sent from my Rogers Captivate using XDA app
Finally i got odin detected my phone... just use a laptop cause my pc wont detect my cappy on download mode.
Thanks for the advise to all!

Bricked, need help.

So, I bricked my Infuse last night at work when I tried installing MIUI from ROM Manager. I've been trying to unbrick using gtg's Ultimate Unbrick method, but no luck. I believe it's something to do with the Samsung Drivers since my phone is not recognized in Odin. Tried to redownload the Drivers from Samsung's website, but still doesn't work.
Any ideas?
BTW, running Windows 7 32bit
why would you install a rom that's for a different phone?
can you boot into recovery mode? did you try the "jig"?
Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.
the reason other roms pop up in rom manager is because you are using the galaxy recovery. unless it says "for infuse" (there is only one, gtg's rom) it wont work. bummer dude. im all out of ideas, never had this happen. hopefully someone who's been through this can chime in and provide some info that will help you.
on a side note, why cant you take it to an att branch and have them exchange it for you?
Pat713 said:
Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.
Click to expand...
Click to collapse
I hope u have USB debugging turned on. If yes, u cud try this:
1. Download and install android SDK (search google for this if don't know how to).
2. Open a command prompt
3. Type in "adb reboot recovery" without quotes, and don't hit enter
4. Connect phone to PC
5. Turn the phone on
6. Wait for "samsung" to appear, and hit enter in command prompt
7. If it says "device not found", use the up arrow to get the command from history, and hit enter again. At some point, it should issue the command to the device.
8. If u can get to recovery, well, u have a way to now try to flash any other ROM.
Don't give up. Samsung has strong phones that could be got out of soft bricks most of the time.
Delete/reinstall the drivers.
Infuse 4G
Just tried Diablo's method, and it tells me command not recognized...
Download Kies on your pc to have it recognize ur phone. Run odin. Put ur phone in download mode (pull out battery, put it back in, hold both volume buttons down, plug in ur usb) and use gtg's unbrick.
Sent from my SAMSUNG-SGH-I997 using XDA App
Tried Kies before and it would never recognize the Infuse. Should I pick Galaxy?
UPDATE!!
Redownloaded Kies and installed the drivers (for the 500th or so time) and now Odin is recognizing a device. It's showing [COM3] instead of COM## but I'm letting Odin do its thing. Seems to be working... Crossing my fingers!
EDIT::
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
****in A! Thanks for the help guys!
Pat713 said:
Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.
Click to expand...
Click to collapse
You need to buy a jig, that will solve the problem.
The jig is less than $10 bucks shipped if you buy it on ebay.
Here is the link:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
Easy to use.. all U do is pull the battery, plug the jig into usb port on the fone replace battery and you will see the big triangle saying "Download" then unplug the jig and load odin.
Setup the pda/phone/pit/csc files in odin3. Then plug in the usb cable from computer to the phone making sure that where odin says "com" that it is highlighted yellow. Then click start in Odin and wait til it says "reboot" after that you will have a working phone with stock froyo 2.2 . Don't change any default setting in odin.
Use the "Ultimate Unbrick" rom - Here is the link:
http://forum.xda-developers.com/showthread.php?t=1116251
Misterjunky said:
You need to buy a jig, that will solve the problem.
The jig is less than $10 bucks shipped if you buy it on ebay.
Here is the link:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
Easy to use.. all U do is pull the battery, plug the jig into usb port on the fone replace battery and you will see the big triangle saying "Download" then unplug the jig and load odin.
Setup the pda/phone/pit/csc files in odin3. Then plug in the usb cable from computer to the phone making sure that where odin says "com" that it is highlighted yellow. Then click start in Odin and wait til it says "reboot" after that you will have a working phone with stock froyo 2.2 . Don't change any default setting in odin.
Use the "Ultimate Unbrick" rom - Here is the link:
http://forum.xda-developers.com/showthread.php?t=1116251
Click to expand...
Click to collapse
I got it unbricked now, problem was the drivers wouldn't correctly install on Win7.
But, now I have a new problem. Just put 3e recovery on and flashed CWM, only to get bricked again (no problems unbricking this time, taking longer to type this than it took to unbrick...). Also, sometimes apps refuse to download from the Market. I tap "INSTALL" and the notification pops up saying downloading, but then it disappears and nothing happens, its like I hit cancel. I'm going to call it for today and get some sleep. At least the phone is usable now! :-D
Pat713 said:
Just tried Diablo's method, and it tells me command not recognized...
Click to expand...
Click to collapse
That means u do not have android toolkit installed on ur system. You should install it first for the adb commands to work.
I would recommend downloading and learning the basics of adb. This could be a life saver in many no-so-happy situations.
Pat713 said:
I got it unbricked now, problem was the drivers wouldn't correctly install on Win7.
But, now I have a new problem. Just put 3e recovery on and flashed CWM, only to get bricked again (no problems unbricking this time, taking longer to type this than it took to unbrick...). Also, sometimes apps refuse to download from the Market. I tap "INSTALL" and the notification pops up saying downloading, but then it disappears and nothing happens, its like I hit cancel. I'm going to call it for today and get some sleep. At least the phone is usable now! :-D
Click to expand...
Click to collapse
Had this same problem and it turned out to be a hardware problem. There was no gix for it. Also youll notice that gtgs recovery includes a preroot. If you need to send your phonr back like i did youll need to get that off. It was tricky for me because the hardware was so screwey. I got it off after a few reboots of the phone and a couple of trys with superoneclick.
Sent from my SAMSUNG-SGH-I997 using XDA App

[Q] [HELP] Stuck on CWM screen, frozen!

Hey everyone!
So I flashed a ji6 tar through SGS kernel flasher to get 2e recovery. I think it managed to do so successfully because now I have CWM when I boot into recovery. HOWEVER, when recovery pops up it goes to the CWM screen and FREEZES! I cannot select any options including reboot system. I also now cannot startup my phone normally! What can I do? I have ODIN but it won't detect my phone when it's connected (tried this about 20 times). I'm running a mac so I guess there aren't very many options. The only way out of anything int his mess is to pull the battery. SOMEONE PLEASE HELP! My phoen is now useless for all purposes. I tried factory reset, etc. On normal bootup my phone is stuck on the startup screen and never progresses past. Help please!
well odin doesnt run on mac.
search for heimdall. (same thing but for all OS) [PROGRAM] Heimdall - Open-Source Cross-Platform Flashing Suite ...
heimdall / odin use download mode not recovery, you know that right? hard to tell by your message.
Instructions for download mode:
plug USB cable into computer
have phone shut off
hold both volume buttons
plug USB into phone
let go of buttons when you see an android digging "down"
Click to expand...
Click to collapse
or get VMware or another virtual machine and install windows. http://www.utorrent.com http://torrentz.eu/search?f=vmware http://torrentz.eu/search?f=windows+7
THanks for the tips.
I've been using (or trying to) Odin in Download mode but it will not detect my device. Recovery in CWM freezes, 2e recovery leading to the CWM screen is fine but when I hit'reboot now' or startup regularly using the power button, it's stuck on the boot up logo page. But I'm investigating Heimdall hopefully that helps or I am totally at my wit's end! Been working on this for a couple hours using everything I can think of! (And Google and XDA forums of course!)
Gave Heimdall a whirl, it just says failed to confirm end of PIT file transfer. HELP!!!
NewbDroid said:
Gave Heimdall a whirl, it just says failed to confirm end of PIT file transfer. HELP!!!
Click to expand...
Click to collapse
Any chance you have access to a Windows based system? I've never used Heimdall, so I can't help you there.
Are you 100% sure you're in Download mode? Yellow shovel guy. Were you using Odin with VMware Fusion or something similar? Try different USB ports if it's a G5 or something, doesn't apply if a Macbook.
Heimdall is open source and it works on all platforms...
It's BETTER!
studacris said:
Heimdall is open source and it works on all platforms...
It's BETTER!
Click to expand...
Click to collapse
I don't doubt that at all. I flash to stock so seldom now that using Odin once ever 3 or 4 months doesn't bother me.
NewbDroid said:
Gave Heimdall a whirl, it just says failed to confirm end of PIT file transfer. HELP!!!
Click to expand...
Click to collapse
unfortunately i know nothing about heimdall, even though im the one that suggested it. studa! help a man out! i gave you your 900
here is a link to a 1 click heimdall package, which also has a prerooted version i suggest you get that as this a transitory os and rooting is part of the process of getting 2e recovery WITHOUT flashiing a stock kernel that will make your phone unbootable.
if you have connection issues refer to THIS THREAD
once that is completed, refer to THIS THREAD to MANUALLY replace 2recovery.
then to make sure it wasn't a wonky cwm file you had that made it freeze(actually now that i think about it you could use adb to push this to the root of /mnt/sdcard FIRST to see if its the cwm file. adb should work in recovery) grab the attached update.zip
Had a similar situation and had to order the USB jig to get out of it. It is pretty easy to make or if you want an easy (and clean) option, order one. Once you have that, remove the battery, SIM and SD. Reinsert the battery and then insert the USB jig. It will go right into download mode and then from there use Odin to flash it back to stock.

AP Fastboot not rocognized

I was wondering if this is happened to anyone else. When i put my phone into ap fastboot mode, windows does not detect new hardware to install drivers for fastboot. If i boot phone normally, my pc recognizes the phone and installs a list of drivers. I am trying to fxz back to stock, but not luck. I read that once in ap fastboot, "Transfer Mode: USB Connected" should appear once conected to pc, mine does not. Any help would be appreciated, trying to get on that ICS train.
Clericgram said:
I was wondering if this is happened to anyone else. When i put my phone into ap fastboot mode, windows does not detect new hardware to install drivers for fastboot. If i boot phone normally, my pc recognizes the phone and installs a list of drivers. I am trying to fxz back to stock, but not luck. I read that once in ap fastboot, "Transfer Mode: USB Connected" should appear once conected to pc, mine does not. Any help would be appreciated, trying to get on that ICS train.
Click to expand...
Click to collapse
The "Transfer Mode: USB Connected will show in your phone, not on your PC. Once you see this on tour phone's screen, you can run the restore script.
Sent from my MB865 using xda's premium carrier pigeon service
Correct, "Transfer Mode: USB Connected" does not show up on my phone.
Clericgram said:
Correct, "Transfer Mode: USB Connected" does not show up on my phone.
Click to expand...
Click to collapse
Try a different USB cable. That has happened to me before, I know it sounds odd, and it is, but give it a shot.
I have tried 2 different cables, i will fish out a third.
Have you tried restarting your PC? Sometimes Windows gets goofy and needs a restart. Also, are you using the USB port from the back of the PC, not the front?
Sent from my MB865 using xda's premium carrier pigeon service
I am suspecting that i have a power issue with my setup.I removed other devices from my pc and Rsd lite recognizes the phone in ap fastboot but the phone does not say "Transfer Mode: USB Connected". Trying flash now but seems to be stuck on 2/18 reboot bootloader.
Edit: Failed Flashing Process No arrival message
Apex_Strider said:
Have you tried restarting your PC? Sometimes Windows gets goofy and needs a restart. Also, are you using the USB port from the back of the PC, not the front?
Sent from my MB865 using xda's premium carrier pigeon service
Click to expand...
Click to collapse
From the back.
So the only way that rsd can detect the phone in fastboot, is if i restart my computer with the phone plugged in, and in fastboot mode. This is very weird to me because i have fxz in the past.
In device manager fastboot is recognized as MOT Single ADB Interface.
Any Ideas?
Clericgram said:
So the only way that rsd can detect the phone in fastboot, is if i restart my computer with the phone plugged in, and in fastboot mode. This is very weird to me because i have fxz in the past.
In device manager fastboot is recognized as MOT Single ADB Interface.
Any Ideas?
Click to expand...
Click to collapse
The last time I tried using AP Fastboot to run my returntostock.script it wouldn't complete, and got an error. So, I had to use RDSLite, and it worked like a charm. I haven't needed to FXZ since then, so don't know if it was a fluke that time. So, are you now able to FXZ via RSDLite now?
Sent from my MB865 using xda's premium carrier pigeon service
Apex_Strider said:
The last time I tried using AP Fastboot to run my returntostock.script it wouldn't complete, and got an error. So, I had to use RDSLite, and it worked like a charm. I haven't needed to FXZ since then, so don't know if it was a fluke that time. So, are you now able to FXZ via RSDLite now?
Sent from my MB865 using xda's premium carrier pigeon service
Click to expand...
Click to collapse
No Failed Flashing Process no arrival message 2/18
I tried reinstalling drivers and rsd.
Don't know why i did not try this earlier, but i just fixed my issue by doing it on my laptop.
I got the same issue. Sorry I didn't see this thread before. Although mine says "transfer mode" but it will not boot into the recovery. Heck If I can't do it tonight, I'll do it tomorrow on my XP com. Stupid WIN7...
Fall of Enosis said:
I got the same issue. Sorry I didn't see this thread before. Although mine says "transfer mode" but it will not boot into the recovery. Heck If I can't do it tonight, I'll do it tomorrow on my XP com. Stupid WIN7...
Click to expand...
Click to collapse
Power off the phone. Hold both vol buttons, then hit the power button. Once it's in recovery, vol down to apfastboot, vol up to select it.
Plug in the phone, open rsdlite, you should see your phone connected now.
Flash the FXZ and go from there.
41rw4lk said:
Power off the phone. Hold both vol buttons, then hit the power button. Once it's in recovery, vol down to apfastboot, vol up to select it.
Plug in the phone, open rsdlite, you should see your phone connected now.
Flash the FXZ and go from there.
Click to expand...
Click to collapse
Oh that's not what I'm saying mate, I know how to physically get into recovery. But I am saying that the first thing ADB does to start the FXZ flash process is reboot the phone into recovery. And it won't.
And also, for some reason it's not recognizing the device properties. Oh well, I'll do it tomorrow on my dependable XP machine LOL.
Fall of Enosis said:
Oh that's not what I'm saying mate, I know how to physically get into recovery. But I am saying that the first thing ADB does to start the FXZ flash process is reboot the phone into recovery. And it won't.
And also, for some reason it's not recognizing the device properties. Oh well, I'll do it tomorrow on my dependable XP machine LOL.
Click to expand...
Click to collapse
Ah, moto is touchy with driver installation and device recognition. I would unplug your phone, uninstall moto device manager, then reboot.
After reboot, reinstall moto device manager, and reboot again.
After the reboot, plug your phone in, it should be clean drivers and newly recognized devices.
After everything is recognized and installed, open adb and check to see if your device is recognized for good measure. If all checks out, try flashing the FXZ again. On a side note, in your program files((x86) if you run 64bit win) you see an RSDlite folder, inside is SDL.exe (that's RSDlite). Right click and run it as an administrator. Hopefully this helps.
Sorry if some of this seems noobish, I'm just going by what works for me and sharing.
This fixed RSD not seeing my phone even with the correct drivers... I am running Windows 7 x64
http://forum.xda-developers.com/showpost.php?p=22986758&postcount=16
Same on Droid 4
I am having the same problem with my Droid 4 and after reading this thread,I will try all the options and methods you guys have described here. Thanks for the great info!!
EDIT: I booted into my Ubuntu Linux with the phone connected through AP Fastboot mode and Ubuntu recognized my phone right away. Try using Linux,it works much better than Windows. Just read how to do things with Linux if you are not experienced with it. My Windows 7 x64 did not recognize the phone AT ALL in AP Fastboot so I went to Linux.
Clericgram said:
So the only way that rsd can detect the phone in fastboot, is if i restart my computer with the phone plugged in, and in fastboot mode. This is very weird to me because i have fxz in the past.
In device manager fastboot is recognized as MOT Single ADB Interface.
Any Ideas?
Click to expand...
Click to collapse

[Q] Boot Loop into CWM with rainbow distortion

Well i was running super CM7, which was beastly at saving battery, and last night i get the hankering to flash entropy's CM9 ICS.
So as per the instructions, i had the blue CWM, so i just flashed the rom and cleaned up. It first booted up fine, with a little rainbow distortion at the start. I then rebooted into CWM to see if it was all good, and its rainbow distorted across the entire screen. I then hit the power button to reboot and it rebooted into CWM with the distortion (tried about 20 times). So i search on XDA and find a thread where something similar happened but he was able to fix his with hemidall. At this point I have tried Odin (dosnt recognize my device), Hemidall (recognized my device but errored out until i installed their drivers, after the reboot no longer sees my device).
So now i am able to get into download mode but neither odin or hemidall recognize my phone. So i guess the question becomes, Am i totally boned on this one? Do i have to bite the bullet and get a new phone? :crying: Thanks, just for taking the time to look over my insignificant problem, and a Thank You Very Much in advance for any advice/replies.
Try going into devices on your PC, delete the Samsung USB composite if it is there. Go get Heimdall Suite and reinstall drivers. Should reboot PC. Go to download mode (vol +/-, battery in, then plug USB in or vol +/-, USB in, then battery and no power button on either). See if your phone is recognized. If yes, find instructions for flashing GB bootloaders. Be careful, flash incorrectly and you might end up with a brick.
Sent from my SGH-I997 using xda premium
I installed the drivers over the samsung composite but now hemidall doesnt recognize my phone anymore, and when i try the drivers again "samsung usb composite" doesnt appear in the list anymore just "unknown device". I've started looking at new phones online, might just have to go with one of those lol.
Can you try a different computer?
Sent from my SGH-I997 using xda premium
I tried with my parents computer and with a different cable on my computer, and neither heimdall or odin would recognize my phone. So i guess its new phone time, im thinking about the lumia 920, has anyone had serious usage with one, how are they? Sorry for sorta changing the topic.
Have you tried installing Kies
Sent from my SGH-I997 using xda premium
yep, it still didnt recognize it, i even downloaded the specific drivers for my phone and still, no device connected in download mode error.

Categories

Resources