Related
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
stealthj said:
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
Click to expand...
Click to collapse
How do I get to the debug screen? *#*#4636#*#* gives me WCMDA/GSM under phone info
Sent from my SGH-T959V using XDA App
stealthj said:
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
Click to expand...
Click to collapse
Curious about this as well. Currently using a vibrant on at&t...
Sent from my SGH-T959 using Tapatalk
stealthj said:
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
Click to expand...
Click to collapse
HSPA+ 21 only works with T-mobile, AT&T doesn't use an AWS band, in this case is 1700/2100Mhz.
Someone may have been able to 'trick' the vibrant into using a basic UMTS band on AT&T, but I never heard of it, let alone heard that the Vibrant supported AT&T 3G. The Vibrant has GSM.support for them (2G), I haven't seen anything else.
Where's the supporting documents that people have been getting At&t 3G with a T-Mobile Vibrant?
Sent from my HTC Vision using XDA App
TheMan42 said:
HSPA+ 21 only works with T-mobile, AT&T doesn't use an AWS band, in this case is 1700/2100Mhz.
Someone may have been able to 'trick' the vibrant into using a basic UMTS band on AT&T, but I never heard of it, let alone heard that the Vibrant supported AT&T 3G. The Vibrant has GSM.support for them (2G), I haven't seen anything else.
Where's the supporting documents that people have been getting At&t 3G with a T-Mobile Vibrant?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Trust me.... I'm using a vibrant on at&t with 3g. It does support the wcdma 1900 band. There is alot of evidence of this...heck engadget made a post about this... google it!
Edit: What I was trying to ask is if the galaxy s 4g supports the 1900 wcdma that the original vibrant supported....
Sent from my SGH-T959 using Tapatalk
Not sure how I could check unless i unlocked it..
Sent from my SGH-T959V using Tapatalk
princedwi said:
Not sure how I could check unless i unlocked it..
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
That would work....hopefully the galaxy s 4g can be unlocked the same way the previous galaxy s phones could.
In my research I have found that 4G is not backwards compatable with 3G. Someware I read that companys are putting 3G and 4G chips on the new 4G phones to bridge the gap between the 3G chip ability to handle voice and the 4G chip being able to handle data. I can't say for sure if SGS4G has both chips. It's a know issue that the 3G SGS misses calls when connected to a laptop because It does not handle data well in combination with voice. That's why I upgraded to the 4G. I don't think Its going to make a lot of difference until TM gets their HW in place with a backbone that can support it.
Samsung Galaxy S 4G 1900 MHz WCDMA
I bought my Samsung Galaxy S 4G at a T-Mobile store in San Francisco. I subsequently upgraded it to the latest firmware provided by T-Mobile using Samsung Kies.
I usually use WCDMA only mode because GSM causes awful buzzing sound when I use it in my car (I have a FM transmitter connected to my phone).
Anyways, I was curious to see if I'd see AT&T, so I searched for network (still under WCDMA Only mode), and it found both AT&T and T-Mobile.
I pressed *#197328640# in the dialer, and then went to the debug screen/band selection to look at available bands, and it actually does have 1900 WCDMA.
It shows
GSM 850, 900, 1800, 1900, WCDMA 2100 (FDD I), WCDMA 1700 (FDD IV), WCDMA 1900(FDD II).
I don't know if AT&T SIM would work since my phone is locked but I can report back once I get it unlocked.
EDIT: Reading an old post of mine, I realized that my memory played a bad trick on me. My tests DID work on 1900 WCDMA and DID NOT work on 850 WCDMA, just opposite to what I wrote earlier in this post. --sorry
fm219 said:
...Anyways, I was curious to see if I'd see AT&T, so I searched for network (still under WCDMA Only mode), and it found both AT&T and T-Mobile.
I pressed *#197328640# in the dialer, and then went to the debug screen/band selection to look at available bands, and it actually does have 1900 WCDMA.
It shows
GSM 850, 900, 1800, 1900, WCDMA 2100 (FDD I), WCDMA 1700 (FDD IV), WCDMA 1900(FDD II).
I don't know if AT&T SIM would work since my phone is locked but I can report back once I get it unlocked.
Click to expand...
Click to collapse
I don't think it would work. For reference, here is a side by side band comparison between my Vibrant (tested 3G on AT&T) and my coworker's SGS 4G (locked, untested).
The essential band here is the 850 1900 WCDMA, but the "overflow" 850 WCDMA is missing and I couldn't make it work anyways (I'm in Houston, maybe it is not switched on here).
My understanding is that AT&T usually uses 1900MHz for 3G, and in certain cities where they don't have enough bandwidth in 1900 MHz like NYC and SF, they use 850MHz.. so you could still get by with only 1900 MHz, no?
EDIT: Reading my old post, my memory played a bad trick on me. My test DID work on 1900 and DID NOT work on 850, just opposite to what I wrote earlier on this post.
fm219 said:
My understanding is that AT&T usually uses 1900MHz for 3G, and in certain cities where they don't have enough bandwidth in 1900 MHz like NYC and SF, they use 850MHz.. so you could still get by with only 1900 MHz, no?
Click to expand...
Click to collapse
Yep, thats what I have heard as well. Now one thing of note. When I tested my Vibe, it only worked on the 850 1900 WCDMA band. Could not make it work on the 850 no matter how hard I tried. I'm in Houston for that matter and maybe this 850 WCDMA is not enabled here.
This was my test: http://forum.xda-developers.com/showpost.php?p=9958501&postcount=14
fosormic said:
EDIT: Reading an old post of mine, I realized that my memory played a bad trick on me. My tests DID work on 1900 WCDMA and DID NOT work on 850 WCDMA, just opposite to what I wrote earlier in this post. --sorry
I don't think it would work. For reference, here is a side by side band comparison between my Vibrant (tested 3G on AT&T) and my coworker's SGS 4G (locked, untested).
The essential band here is the 850 1900 WCDMA, but the "overflow" 850 WCDMA is missing and I couldn't make it work anyways (I'm in Houston, maybe it is not switched on here).
Click to expand...
Click to collapse
I'm currently unlocked on AT&T and i'm on 3G. I ALWAYS have an issue with upload speeds, but otherwise download speeds are just fine.
I attached four photos, of the available bands with my CURRENT galaxy S 4G unlocked on AT&T.
Also, a speed test I ran. That download speed is WAY higher than average because it was taken when the network was under the lightest usage possible, late at night.
Oh wow, over 5Mbps download on AT&T?
Are you on AT&T's 4G (HSPA+) or 3G?
I'm supposedly on T-Mobile 4G (my phone shows 4G when I download/upload), but I don't ever get 5Mbps. I get usually something around 2~3Mbps down and 1Mbps upload. I'm in the Bay Area.
I went into phone debug page, and one of the screens says HSDPA[0], HSUPA[0]. It also says network status: HSDPA (sorry I don't have the exact info on me right now).
Am I really just on HSDPA, not HSPA+? Is there a definite way to find out what my phone is using? Thank you.
fm219 said:
Oh wow, over 5Mbps download on AT&T?
Are you on AT&T's 4G (HSPA+) or 3G?
I'm supposedly on T-Mobile 4G (my phone shows 4G when I download/upload), but I don't ever get 5Mbps. I get usually something around 2~3Mbps down and 1Mbps upload. I'm in the Bay Area.
I went into phone debug page, and one of the screens says HSDPA[0], HSUPA[0]. It also says network status: HSDPA (sorry I don't have the exact info on me right now).
Am I really just on HSDPA, not HSPA+? Is there a definite way to find out what my phone is using? Thank you.
Click to expand...
Click to collapse
Technically I'm on HSPA+, though this phone doesn't even cover all of the "necessary" bands.
Look, to edit what bands you're on go into the market and download SGS Tools.
Then, go into the first line (Secret Codes) and hit Band Selection.
I'm on AT&T so I'm not sure what bands you need, but you can manually select them in there.
To check the band you're on, go to GSM Status in the "Secret Codes" page again.
Sent from my SGH-T959V using XDA Premium App
Oh I know I'm on 1700/2100 MHz because that's the only frequency (AWS) that T-Mobile uses for WCDMA/UMTS/4G/3G.
I downloaded Phono, and it says Network Type is HSDPA. Shouldn't it say HSPA+? I'm just wondering if there's an easy way to tell if I'm really on 4G (aka HSPA+) as opposed to 3G.
I actually messed around with debug settings last night so I'm worried that I screwed it up....
Thank you!
fm219 said:
Oh I know I'm on 1700/2100 MHz because that's the only frequency (AWS) that T-Mobile uses for WCDMA/UMTS/4G/3G.
I downloaded Phono, and it says Network Type is HSDPA. Shouldn't it say HSPA+? I'm just wondering if there's an easy way to tell if I'm really on 4G (aka HSPA+) as opposed to 3G.
I actually messed around with debug settings last night so I'm worried that I screwed it up....
Thank you!
Click to expand...
Click to collapse
Which debug settings did you change?
And as for Phono (which I've never even heard of/used until now), my phone says HSDPA as well, which, quite frankly, makes no sense. I guess you can technically get speeds of around 5MBPS on HSDPA but it's not typical.
You should easily be able to tell whether you're on HSDPA or HSPA+ with the 4G/3G connectivity icon. in your status bar.
Now, I'm no expert, but hopefully that answers your question.
I played around with GCF settings. When I go into debug mode, there was something about choosing Rel.6 or Rel.5 or cancel settings.. And then also, if you do *#3214789#, you can enable/disable GCF Mode.. which I have no idea what it is about....
Thanks!
fm219 said:
I played around with GCF settings. When I go into debug mode, there was something about choosing Rel.6 or Rel.5 or cancel settings.. And then also, if you do *#3214789#, you can enable/disable GCF Mode.. which I have no idea what it is about....
Thanks!
Click to expand...
Click to collapse
Hmm...that's awfully strange.....
I can't find anything about it anywhere....
Try restoring using ODIN yet?
I mean, if the phone is that messed up since you messed with that setting.
I put my friends att sim in my unlocked sgs4g to test and the 3g sign came up by the bars as well as the att operator logo didn't really test out speeds but im guessing that the 3g sign wouldn't have came up unless it was really picking up that frequency.
Purchased a Jiayu g2 to play with so far the phone is very nice. It is suppose to work with 850/900/1900/2100mhz wcdma however I cannot get it to work on 3g with att I only get edge and have tried just about every apn setting I can. Does anyone else in the US have this phone working on 3g? I have it rooted. Funny never thought I would say this but it is a very nice phone.
eaa628 said:
Purchased a Jiayu g2 to play with so far the phone is very nice. It is suppose to work with 850/900/1900/2100mhz wcdma however I cannot get it to work on 3g with att I only get edge and have tried just about every apn setting I can. Does anyone else in the US have this phone working on 3g? I have it rooted. Funny never thought I would say this but it is a very nice phone.
Click to expand...
Click to collapse
A lot of these Chinese phones state they're quadband GSM, but only have 2100 for 3G. Correct me if I am wrong.
Also, do you accidentally have GSM Only set?
Sent from my iPad using Tapatalk HD
KayxGee1 said:
A lot of these Chinese phones state they're quadband GSM, but only have 2100 for 3G. Correct me if I am wrong.
Also, do you accidentally have GSM Only set?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
here is the link for google translate.
http://translate.google.com/translate?hl=en&sl=zh-CN&tl=en&u=http://www.ejiayu.com/Product-5.html
this is the manufactures website and in the product parameters tab it shows 850/900/1900/2100 wcdma 3g and even in the engineermode menu it has them listed. i only paid 160 for it but to be honest it is a real nice phone and i was completely shocked at how well it was constructed. i even have it rooted. if there is anyone else out there that has this phone in the US or anywhere i would be interested to find out what bands you are on.
Take a look at the specshere
It shows 2100MHz for 3G
Don't be fooled by Engineering mode. It may show the options for specific MHz, but if the phone doesn't support it then the options pointless and misleading.
Sent from my iPad using Tapatalk HD
KayxGee1 said:
Take a look at the specshere
It shows 2100MHz for 3G
Don't be fooled by Engineering mode. It may show the options for specific MHz, but if the phone doesn't support it then the options pointless and misleading.
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
i hear what you are saying. but the fact that the manufacture website shows the bands. i understand that the selling sites are all diff some show 2100 some show 850/2100. but for 160 it was worth a shot.
So no one else in north America has this phone?
Hi,
I have heard that MTK6575 SoC does support 3G on 850MHz/1900MHz. Two things might prevent it from working.
1. Your cellular provider maynot be providing 3G on both 850 and 1900 where you live. It could just be on 1900MHz where you live. Could you go to some other part of the city and test it?
2. I have read that the antennae required for 850/1900MHz is different from 2100MHz. So, even if the SoC supports it, the signal strength is not strong enough to make it work.
I would be very interested in your test results since I am thinking of buying one.
KayxGee1 said:
A lot of these Chinese phones state they're quadband GSM, but only have 2100 for 3G. Correct me if I am wrong.
Also, do you accidentally have GSM Only set?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Because China Unicom 3G is @ WCDMA 2100MHz.
Sent from my GT-S5570 using xda premium
eaa628 said:
Purchased a Jiayu g2 to play with so far the phone is very nice. It is suppose to work with 850/900/1900/2100mhz wcdma however I cannot get it to work on 3g with att I only get edge and have tried just about every apn setting I can. Does anyone else in the US have this phone working on 3g? I have it rooted. Funny never thought I would say this but it is a very nice phone.
Click to expand...
Click to collapse
Hi! Did you insert your 3G SIM on the SIM 1 slot? It is the only SIM slot capable of 3G (WCDMA). There are two slots in Jiayu G2 and only SIM 1 will work with 3G. SIM 2 is for GSM only.
toffzter said:
Hi! Did you insert your 3G SIM on the SIM 1 slot? It is the only SIM slot capable of 3G (WCDMA). There are two slots in Jiayu G2 and only SIM 1 will work with 3G. SIM 2 is for GSM only.
Click to expand...
Click to collapse
yes i did. i have even tried to get help from Ejiayu.com and no one replies. the spec on the their website show is is 850/900/1900/2100 mhz wdma and it shows in the engineering menu as well but i think it is a lie i can not get it to work at all in 3g. My sim works fine in my Pantech Burst 4g LTE. i have not given u completely but i need someone who has an in depth knowledge of this phone to help
3g access
eaa628 said:
Purchased a Jiayu g2 to play with so far the phone is very nice. It is suppose to work with 850/900/1900/2100mhz wcdma however I cannot get it to work on 3g with att I only get edge and have tried just about every apn setting I can. Does anyone else in the US have this phone working on 3g? I have it rooted. Funny never thought I would say this but it is a very nice phone.
Click to expand...
Click to collapse
u might try and see what the apn setting is
u might have to input the correct apn for your carrier
Just wanted to give some info I found using QPST(qualcomm software) to see what cell bands are configured for our HTC One M8. I even looked at the Rezound bands as well. As most of you know, verizon didn't carrier lock our phones, so if we switch to global or even GSM network, we can use other carriers GSM SIM cards. Just need to properly configure the APN's of course. Below are the bands that the phone will search for when Global Network is selected. I pulled this configuration from my actual device. The Rezound only was missing Bit 19 & 49 selection, but everything else was selected:
[Bit_00] Band Class 0, A-System
[Bit_01] Band Class 0, B-System
[Bit_02] Band Class 1, all blocks
[Bit_07] GSM DCS 1800 band
[Bit_08] GSM Extended GSM (E-GSM) band
[Bit_09] GSM Primary GSM (P-GSM) band
[Bit_19] GSM 850 band
[Bit_21] GSM PCS 1900 band
[Bit_22] WCDMA Band I - EUROPE JAPAN & CHINA IMT 2100 band
[Bit_23] WCDMA Band II - US PCS 1900 band
[Bit_26] WCDMA Band V - US 850 band
[Bit_49] WCDMA Band VIII - EUROPE & JAPAN 900 band
I'm guessing the reason some of us are having issues on Tmobile is that the AWS bands are missing? Can we enable them somehow?
hyperfire21 said:
I'm guessing the reason some of us are having issues on Tmobile is that the AWS bands are missing? Can we enable them somehow?
Click to expand...
Click to collapse
It could possibly be activated using QPST, but there are other steps to do it. The only issue is that since QPST is the QualComm radio programing, there is potential to lose signal quality or lose all radio functionality. That said, it could also be possible to recover by flashing the original firmware or RUU to recover. I now T-mobile uses 1900 GSM PCS band and AWS 1700 mHZ. There is another program I use to actually enable more bands. The program basically converts the selection of bands to a hexidecimal number to use in QPST software to program the added bands. Again, not sure if the Qualcom chip can use it. There is a WCDMA band selection for Bit (25) IV- US 1700 than could be programed to enable. I used a thread from the Sony Xperia forum to help me use the two programs.
rudyo78427 said:
Just wanted to give some info I found using QPST(qualcomm software) to see what cell bands are configured for our HTC One M8. I even looked at the Rezound bands as well. As most of you know, verizon didn't carrier lock our phones, so if we switch to global or even GSM network, we can use other carriers GSM SIM cards. Just need to properly configure the APN's of course. Below are the bands that the phone will search for when Global Network is selected. I pulled this configuration from my actual device. The Rezound only was missing Bit 19 & 49 selection, but everything else was selected:
[Bit_00] Band Class 0, A-System
[Bit_01] Band Class 0, B-System
[Bit_02] Band Class 1, all blocks
[Bit_07] GSM DCS 1800 band
[Bit_08] GSM Extended GSM (E-GSM) band
[Bit_09] GSM Primary GSM (P-GSM) band
[Bit_19] GSM 850 band
[Bit_21] GSM PCS 1900 band
[Bit_22] WCDMA Band I - EUROPE JAPAN & CHINA IMT 2100 band
[Bit_23] WCDMA Band II - US PCS 1900 band
[Bit_26] WCDMA Band V - US 850 band
[Bit_49] WCDMA Band VIII - EUROPE & JAPAN 900 band
Click to expand...
Click to collapse
I activated all other bands yet i still didn't get LTE, so i assume the restriction is somewhere within the chip perhaps.
band 3
regspy said:
I activated all other bands yet i still didn't get LTE, so i assume the restriction is somewhere within the chip perhaps.
Click to expand...
Click to collapse
hi
did you activate band3? 1800mhz and 2600mhz?
still dont get LTE in europe?
do you have a guide how to enable it?
thanks
boazlaz said:
hi
did you activate band3? 1800mhz and 2600mhz?
still dont get LTE in europe?
do you have a guide how to enable it?
thanks
Click to expand...
Click to collapse
Yes I enabled band 3 and 7 (1800,2600) following the guide posted here
unlock Qualcomm bands
So no euro lte at all yet?
Sent from my HTC6525LVW using XDA Free mobile app
BobbySteel said:
So no euro lte at all yet?
Sent from my HTC6525LVW using XDA Free mobile app
Click to expand...
Click to collapse
Nop, if someone can tell me which Rom has the change bands function then can try that as well. But even after opening the bands I'm only able to get H 14.4mbps.
Are you currently in Europe too? I'm dying to get Vodafone lte on this handset. 3g works fine but I haven't tried the qpst route yet.
BobbySteel said:
Are you currently in Europe too? I'm dying to get Vodafone lte on this handset. 3g works fine but I haven't tried the qpst route yet.
Click to expand...
Click to collapse
In UAE but we use the same LTE bands as Europe. You can try the qpst thing on stock Rom or cleanROM
regspy said:
In UAE but we use the same LTE bands as Europe. You can try the qpst thing on stock Rom or cleanROM
Click to expand...
Click to collapse
I have an old phone info app that's the 4636 menu thing. Hadn't tried this before but just tried assigning the bands there. Somehow that just hosed me and now I only get the 1900 band it seems, so phone is radio-less for me now
BobbySteel said:
I have an old phone info app that's the 4636 menu thing. Hadn't tried this before but just tried assigning the bands there. Somehow that just hosed me and now I only get the 1900 band it seems, so phone is radio-less for me now
Click to expand...
Click to collapse
There's a solution for this problem, if you are s-off-ed. I also did the same thing - i selected USA bands and my phone radio died. Just make a nandroid, flash ARHD , go to the same 4636 menu and it will give you another option in band selection - Auto!! Choose auto, then reboot and make sure you have connection with the network. Then restore from nandroid and you're good to go! I will try to find the link to the original thread!
EDIT: There it is: http://forum.xda-developers.com/showthread.php?t=2773907
If it helps you - thank the people in the original thread, i didn't find this solution, i'm just sharing the info!
vanshee said:
There's a solution for this problem, if you are s-off-ed. I also did the same thing - i selected USA bands and my phone radio died. Just make a nandroid, flash ARHD , go to the same 4636 menu and it will give you another option in band selection - Auto!! Choose auto, then reboot and make sure you have connection with the network. Then restore from nandroid and you're good to go! I will try to find the link to the original thread!
EDIT: There it is: http://forum.xda-developers.com/showthread.php?t=2773907
If it helps you - thank the people in the original thread, i didn't find this solution, i'm just sharing the info!
Click to expand...
Click to collapse
Thanks that was helpful! Somehow I also had recently loaded a Xposed app to show CPU speed on the top bar. I uninstalled that then after two reboots things came back. So odd, but I'm not complaining at this point.
after a google search it seems people have gotten into problems with chaning bands on verizon devices, the above solutions brings the radio back to life. But it certainly doesn't unlock LTE on europe bands.
So i guess its a lost cause, as it must be a hardware limitation
Yeah disappointing that we can't add those
Sent from my HTC6525LVW using XDA Free mobile app
I seem to be able to get Band 4 LTE sometimes on my Verizon M8 but how can we enable AWS HSPA+ bands?
How band 4 only sometimes?
BobbySteel said:
How band 4 only sometimes?
Click to expand...
Click to collapse
I guess my area has weak signal.. switches between LTE and 3g constantly.
Ok guys ive finally unlocked Band 3 and 7 (europe) LTE on Verizon HTC one m8.....
Here are the steps
Thanks to @olokos @BlackSoulxxx @fffft
Original thread for unlocking all bands
wow!
good job
was it hard? im afraid...
Hi All,
I was recently on holidays in the USA which using my Photon Q sim modded by Cornholio I was able to get LTE on T-Mobile. This was only in areas where they have re-farmed 1900 mhz (band 2) to LTE. I'm not sure if this makes a difference but I also changed nv 6828 for 1900mz bands 2 & 25. So in theory LTE should work on AT&T where they use 1900 mhz band 2 LTE. AT&T was was coming up a lot when I was doing a network search. It is listed as AT&T 4g.
Regards,
Sebastian
cyri2 said:
So in theory LTE should work on AT&T where they use 1900 mhz band 2 LTE. AT&T was was coming up a lot when I was doing a network search. It is listed as AT&T 4g.
Click to expand...
Click to collapse
Hope you enjoyed your visit...
I've never played with any of this, but I'm an AT&T user in US... what exactly are you saying to try setting in the phone in order to try to get LTE on AT&T.... and if there's any way to know if AT&T is using that band in a particular area?
enigma9o7 said:
Hope you enjoyed your visit...
I've never played with any of this, but I'm an AT&T user in US... what exactly are you saying to try setting in the phone in order to try to get LTE on AT&T.... and if there's any way to know if AT&T is using that band in a particular area?
Click to expand...
Click to collapse
Hi,
This is what I did with my phone to get LTE was the following: Using the phone dialer
*#*#4636#*#* and in phone information menu change data to LTE/GSM/WCDMA
##3282# and in the LTE menu make sure that you have LTE as enabled, if not edit the value to enabled. You need to use the msl code for your phone to do this. I have an app to do this if you need.
To see if AT&T 1900 LTE is available in your area, go into settings, mobile network settings, network operators and choose the option search networks. A list of available networks will come up. If you have AT&T 1900 LTE band 2 available, this will be listed as AT&T 4G. Tap on this and you should be able to get LTE. The Photon Q lists LTE as 4G in the status bar on the top of the phone.
Hope that this is some help
Hey guys,
I'm really interested in picking up a 4c, and would be even more inclined to do so if LTE bands can be unlocked (Ideally bands 2, 4 and 12).
This has been done successfully in the past on Xiaomi devices (specifically the Mi Note Pro with the Snapdragon 810). Since the 808 shares a very similar architecture to the 810, I'm hoping it can be done on the 4c successfully.
Here are some resources and guides to start with:
http://forum.xda-developers.com/redmi-note/general/unlock-lte-bands-step-step-xiaomi-mi-t3084774
http://en.miui.com/thread-154862-1-1.html
http://forum.xda-developers.com/mi-...how-to-unlock-lte-frequency-bands-mi-t3215880
http://forum.xda-developers.com/oneplus-one/general/guide-unlock-aditional-bands-qualcomm-t2877031
http://www.xda-developers.com/remove-band-restrictions-qualcomm/
Hopefully someone with a Mi 4c is able to try and confirm their success!
That's very interesting! I wish also band 20 (800 MHz) could be unlocked since it's largely used in Europe.
Mee too interested to unlock (if possibile) 800 mhz
One more interested in the 800. :good:
B4 (AWS)
Im up for B4 (AWS) :good:
doesn't have it unlocked but it seems it makes really no difference. Don't trust the few articles from people who did not even test...
I have LTE bands everywhere (work, home, way between) and I live in a zone where it is kinda hard to get...
exploreresp said:
doesn't have it unlocked but it seems it makes really no difference. Don't trust the few articles from people who did not even test...
I have LTE bands everywhere (work, home, way between) and I live in a zone where it is kinda hard to get...
Click to expand...
Click to collapse
It depends a lot on what network you're on. The LTE bands that come enabled by default on the 4C don't support any US networks.
800 mhz (band 20) would be great
What LTE bands does mi4c support?
Does anyone know what LTE Bands the Xiaomi mi4c supports out of the box?
Been struggling to find a reliable source/list
boonkoh said:
Does anyone know what LTE Bands the Xiaomi mi4c supports out of the box?
Been struggling to find a reliable source/list
Click to expand...
Click to collapse
2G GSM 850/900/1800/1900MHz; CDMA BC0/BC1
3G WCDMA 850/900/1900/2100MHz; CDMA BC0/BC1
4G FDD-LTE: 1800/2100/2600MHz; TDD-LTE: Bands 38(TD 2600) / 39(TD 1900) / 40(TD 2300) / 41(TD 2500)
800MHz?
Hi,
Bought mi4c to find out that I can't get LTE working in my village
I live 12kilometers from a bigger city. There is LTE available in my village but I think they operate on 800MHz and in city at 1,6GHz.
I dreamed about using my new 4g connection here after 3years with Galaxy S3
I have to try these guides. Thank you for providing them.
Regards,
Noboby tried to unluck bands?
Wouldn't advise in case it bricks the phone. If there is a way to unbrick, then go for it it
ermacwins said:
Wouldn't advise in case it bricks the phone. If there is a way to unbrick, then go for it it
Click to expand...
Click to collapse
In Snapdragon phones there is always a way to unbrick but it could be very frustrating and time intense
I have tested it on many of my snapdragon phones.
On some phones, it works flawlessly. On other, the signal strength is weaken but works nevertheless. However, some phones especially carrier ones have anti tampering mechanism which reverts the value back to original after restart. However, usually this is solved by a custom kernel and custom rom but then again, it gets really tough to get into diag mode in custom modes.
Never had any problems.
But you MUST backup your EFS partition via recovery or using QPST / QXDM else you would have a lot of problems if you messed up the values like no signals or broken wifi or sensors etc. and SAVE them on your phone as well as on your PC. (at least two backups)
As long as you take the above two precautions, you will never mess up your phone!
Its supports LTE band 3 and 7 which is mostly used in europe, middle east and asia. However even after you select "Prefer LTE" from the setting it might not connect.
You can try this (this will change on reboot so will try to see if i can change within the code):
1. Enter *#*#4636#*#* in the diapad.
2. Select phone information 1 (there are two sims so select the first one)
3. Change to LTE/WCDMA (if it doesn't connect to LTE then try "LTE only" and then change it to LTE/WCMDA)
If the above doesn't connect to LTE then your carrier is offering LTE at a different frequency.
For me atleast the default APN were wrong, so i had to manually change the APN restart and then do the dialer thing.
regspy said:
3. Change to LTE/WCDMA (if it doesn't connect to LTE then try "LTE only" and then change it to LTE/WCMDA)
Click to expand...
Click to collapse
There is NO LTE/WCDMA option only. Please see screenshot and point out what option I'm supposed to pick
screen shot of "phone information 1" --> http://imgur.com/BELHKaO
Which one of those am I supposed to tap on?
I picked "TD-SCDMA, WCDMA and LTE" but that broke network connectivity.
EDIT: Please also take a look at this: http://imgur.com/gallery/yzIHD49
I am currently connected to "3 ITA 3G" and would like to connect to "3 ITA 4G" but tapping on that makes a pop up appear "Registered on network". However no 4G appears in the bar on top. It remains stuck in 3G or H+.
3 ITA doesn't have LTE on band 20 [8oo Mhz LTE].
So why aren't I picking up 4G?
@AndrewIT im not in italy, however from Wiki it seems your carrier supports 4G on band 3 (1800).
select the "3 ITA 4G", then follow my steps. You have to scroll up that list in screenshot http://imgur.com/BELHKaO and you'll see "LTE only" and "LTE/WCDMA" option.
regspy said:
@AndrewIT im not in italy, however from Wiki it seems your carrier supports 4G on band 3 (1800).
select the "3 ITA 4G", then follow my steps. You have to scroll up that list in screenshot http://imgur.com/BELHKaO and you'll see "LTE only" and "LTE/WCDMA" option.
Click to expand...
Click to collapse
Thank you! I was finally able to see the 4G icon on my Mi4c.
Entered *#*#4636#*#* in the diapad.
Selected phone information 1 (there are two sims so select the first one)
I scrolled up [see screenshot] and set WCDMA and LTE from the list.
Screenshot: http://imgur.com/OJ98uQi
You can see that I successfully picked up 4G signal, but it was extremely poor, only one bar standing close to a window.
As I move inside the house it loses 4G and gets back to 3G or H+.
It seems that I'm way too far from the LTE antenna to get a good 4G signal.
Guys I am kinda lost here, so is there a good chance that it supports especially 800Mhz band or not ? And when I am here, is there hardware difference between TDD-LTE and FDD-LTE version? How do I find out which one I have ?