[q] lg p698f - General Questions and Answers

Gentleman, I followed a tutorial to upgrade my P698F, but in the middle of the process I received an error (see log below), and now my phone seems to be bricked.
I tried hard reset it, but nit even the logo is shown.
Does anyone knows what can I do?
[R&D Test Tools Log File]
13:50:55 : Launching SW update
13:50:55 : Unpacking KDZ
13:51:16 : KDZ file extraced
13:51:25 : Files were extracted.
13:51:25 : LGMobileDL Load.
13:51:25 : Port = -1
13:51:25 : Connecting to phone
13:51:36 : Check Phone mode = 1
13:51:57 : Phone type check.......
13:51:57 : LGMobileDL.DLL Loading....
13:51:58 : _SetAuthMark Ok : wAuthMark(24714)
13:51:58 : _DetachDLL Call
13:51:58 : _DetachDLL Call End
13:51:58 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10e-IND-XX-MAR-28-2011+0-DZ.dz
13:51:58 : Param : moduleDir =
13:51:58 : Param : waitTime = 0
13:51:58 : Param : UsbHighSpeed = 1
13:51:58 : Param : PhoneMode = 1
13:51:58 : Param : BinVersion = V10E
13:51:58 : Param : AuthMark = 24714
13:51:58 : Call fn_StartUpgrade
13:53:31 : 3GQCT : wParam = 4, lParam = 0
13:53:31 : Step Complete : DLOAD Change
13:54:18 : 3GQCT : wParam = 3, lParam = 0
13:54:18 : Step Complete : C Drive Erase
13:54:18 : 3GQCT : wParam = 205, lParam = 0
13:54:26 : 3GQCT : wParam = 100, lParam = 4008
13:54:26 : Step : Upgrade Error error code = 4008
13:54:26 : ResetStartInfo() Call
13:54:26 : _DetachDLL Call
13:54:26 : _DetachDLL Call End
13:54:26 : FreeLibrary Call
13:54:26 : FreeLibrary Call End
13:54:26 : ResetStartInfo() Call End
13:54:27 : ===FINISHED=== ​

http://www.news4gsm.com/octopus-box-lg-software-v2-0-5-15309
try this program it can factory reset and reflash your phone i think thats what its for might help to unbrick you.

Related

Error downgrade to 2.2 with KDZ

I have the problem. I upgraded to Android 2.3.3 Gingerbread, but I can't downgrade to 2.2. I get this error when trying with KDZ:
Code:
3GQCT : wParam = 4, lParam = 0
Step Complete : DLOAD Change
3GQCT : wParam = 100, lParam = 6
Step : Upgrade Error error code = 6
ResetStartInfo() Call
_DetachDLL Call
_DetachDLL Call End
FreeLibrary Call
FreeLibrary Call End
ResetStartInfo() Call End
===FINISHED===
Please help me. Thanks.
I have the same problem

Lg optimus 3d max p720h - bricked

Hey guys,
first let me tell you that im a noob and im not a native english speaker, so excuse my poor english. I have a 3d max p720h (telcel V08a BB) and, to my everlasting regret, tried flashing p920h roms. i tried accura max 3.1, v1 and Promethius Rom V1.5 20F.
They half worked... the phone could not enter sleep mode or have the screen turned off, or it would have the sleep of death issue. I panicked, realizing i forgot to do a CWM backup... so i went looking for a KDZ file for my phone which i found in some chinese site (i found 3 of them: V10A_00.kdz, V10A_01.kdz and V10A_02.kdz). Then i used the great tutorial of user `the dark lestat` (http://forum.xda-developers.com/showpost.php?p=22417769&postcount=1) and was able to flash the kdz, but now it boot loops and i cant enter cwm. Can someone help me?
I know i did bad, but since the phone turns on and can enter download mode i dont think its forever bricked... help is appreciated.
Thanks in advance!
ricardo.damico said:
Hey guys,
first let me tell you that im a noob and im not a native english speaker, so excuse my poor english. I have a 3d max p720h (telcel V08a BB) and, to my everlasting regret, tried flashing p920h roms. i tried accura max 3.1, v1 and Promethius Rom V1.5 20F.
They half worked... the phone could not enter sleep mode or have the screen turned off, or it would have the sleep of death issue. I panicked, realizing i forgot to do a CWM backup... so i went looking for a KDZ file for my phone which i found in some chinese site (i found 3 of them: V10A_00.kdz, V10A_01.kdz and V10A_02.kdz). Then i used the great tutorial of user `the dark lestat` (http://forum.xda-developers.com/showpost.php?p=22417769&postcount=1) and was able to flash the kdz, but now it boot loops and i cant enter cwm. Can someone help me?
I know i did bad, but since the phone turns on and can enter download mode i dont think its forever bricked... help is appreciated.
Thanks in advance!
Click to expand...
Click to collapse
I think is better to use emergency mode into lg flashing tool.
im gonna try this http://forum.xda-developers.com/showthread.php?t=1111771
Downloading a p720h bin from another forum, its kinda slow but when its finished ill try it. when you say emergency mode you mean R&D test tool with phone mode = emergency, type = 3gqct and normal web upgrade options? if thats what you mean, i tried it like four times already and still get a boot loop and no CWM....
ricardo.damico said:
im gonna try this http://forum.xda-developers.com/showthread.php?t=1111771
Downloading a p720h bin from another forum, its kinda slow but when its finished ill try it. when you say emergency mode you mean R&D test tool with phone mode = emergency, type = 3gqct and normal web upgrade options? if thats what you mean, i tried it like four times already and still get a boot loop and no CWM....
Click to expand...
Click to collapse
when trying this method with smartflashtool i get an error magic number does not coincide....
emergency mode in lg flashing tool log:
23:04:18 : [C:\LGMobileUpgrade] Try to delete folder
23:04:18 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:04:18 : Start Date : 2012-08-12 23:04:18
23:04:18 : ---------- QM Testmode ---------
23:04:18 : ***** Check Tool Version *****
23:04:18 : Tool version : 1.5.4.8
23:04:18 : UpgradeDLL version : 1.2.6.7
23:04:18 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:04:18 : LGE USB Driver Version :
23:04:18 : Android PDLV Version :
23:04:18 : Android NDLV Version :
23:04:18 : ******************************************
23:04:18 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:04:18 : SetEmerModeAT()
23:04:18 : _IsConnectedPhone Call
23:04:40 : _IsConnectedPhone(2)
23:04:40 : 0 - NotConnected.
23:04:40 : 1 - Normal connect success
23:04:40 : 2 - Emergency connect success
23:04:40 : *****CheckOS Start********
23:04:40 : Microsoft_Windows_XP_Professional_Service Pack 3
23:04:40 : *****CheckPCSyncPrograms Start*****
23:04:41 : PCSyncPrograms Not Found - OK and ready to upgrade
23:04:41 : Checking the connection with the cell phone...
23:04:41 : dwWaitResetTime(40000 ms)
23:04:42 : Phone Mode(2)
23:04:42 : *****GetPhoneType Start*****
23:04:42 : Phone Type : OMAP_IFX
23:04:42 : *****GetPhoneBinaryVersion Start*****
23:04:42 : *****Get ESN / IMEI / MEID Start*****
23:04:42 : ESN/IMEI/MEID : 004402341420333
23:04:42 : Phone type Compare start
23:04:42 : *****CheckPCSyncPrograms Start*****
23:04:42 : PCSyncPrograms Not Found - OK and ready to upgrade
23:04:43 : ****************CheckAndDownload********************
23:04:43 : ******Extract Start C:\Users\User\Desktop\android\lg p720h\V10A_00 (1).kdz*****
23:04:43 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
23:04:43 : File Size = 553543031
23:05:01 : Extract kdz file Success.
23:05:09 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb\n
23:05:10 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb)
23:05:10 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP720h.dll\n
23:05:10 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP720h.dll)
23:05:10 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
23:05:10 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP720h.dll)
23:05:10 : Extract End C:\Users\User\Desktop\android\lg p720h\V10A_00 (1).cab
23:05:10 : ------------------Model.dll Information-------------------
23:05:10 : Filename : LGP720h.dll
23:05:10 : Version : 1.0.0.5
23:05:10 : File size : 270336
23:05:10 : File date : 2012/03/06-10:34:12
23:05:10 : PC Created date: 2012/08/12-23:05:10
23:05:10 : ----------------------------------------------------------
23:05:10 : *****Check LGCM Programs Start*****
23:05:10 : LGCM Programs Not Found - OK and ready to upgrade
23:05:10 : *****WorkModelDLL Start*****
23:05:17 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
23:05:17 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
23:05:17 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP720h.dll)
23:05:17 : _DetachDLL Call
23:05:17 : _DetachDLL Call End
23:05:17 : Call fn_StartUpgrade
23:05:17 : ********* 2Chip Model.dll input Parameter*************
23:05:17 : MODEL_EVENT : 32769
23:05:17 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb
23:05:17 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
23:05:17 : BootWaitTime : 49500
23:05:17 : UsbHighSpeed : FALSE
23:05:17 : PhoneMode : 2
23:05:17 : NewPhoneBinVersion : V10A_00
23:05:17 : ClearSI : FALSE
23:05:17 : AuthMark : 0
23:05:17 : ********* 2Chip Model.dll input Parameter End*************
23:05:22 : wParam : 2004, lParam = 7
23:05:22 : Step : TYPE_WPARAM_IFX_DN_POS
23:05:22 : wParam : 2007, lParam = 0
23:05:22 : Step : TYPE_WPARAM_READ_FILES
23:05:22 : wParam : 2004, lParam = 8
23:05:22 : Step : TYPE_WPARAM_IFX_DN_POS
23:05:42 : wParam : 2004, lParam = 9
23:05:42 : wParam : 2004, lParam = 10
23:05:43 : wParam : 2003, lParam = 97
23:05:43 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
23:05:43 : wParam : 2004, lParam = 15
23:05:43 : Step : TYPE_WPARAM_IFX_DN_POS
23:05:48 : wParam : 2004, lParam = 16
23:06:05 : wParam : 2004, lParam = 17
23:06:07 : wParam : 2004, lParam = 18
23:06:07 : wParam : 2004, lParam = 19
23:06:07 : wParam : 2004, lParam = 20
23:06:11 : wParam : 2004, lParam = 21
23:06:13 : wParam : 2004, lParam = 22
23:06:15 : wParam : 2004, lParam = 23
23:06:18 : wParam : 2004, lParam = 24
23:06:20 : wParam : 2004, lParam = 25
23:06:22 : wParam : 2004, lParam = 26
23:06:24 : wParam : 2004, lParam = 27
23:06:26 : wParam : 2004, lParam = 28
23:06:29 : wParam : 2004, lParam = 29
23:06:31 : wParam : 2004, lParam = 30
23:06:33 : wParam : 2004, lParam = 31
23:06:35 : wParam : 2004, lParam = 32
23:06:37 : wParam : 2004, lParam = 33
23:06:40 : wParam : 2004, lParam = 34
23:06:42 : wParam : 2004, lParam = 35
23:06:44 : wParam : 2004, lParam = 36
23:06:46 : wParam : 2004, lParam = 37
23:06:48 : wParam : 2004, lParam = 38
23:06:50 : wParam : 2004, lParam = 39
23:06:53 : wParam : 2004, lParam = 40
23:06:55 : wParam : 2004, lParam = 41
23:06:57 : wParam : 2004, lParam = 42
23:06:59 : wParam : 2004, lParam = 43
23:07:02 : wParam : 2004, lParam = 44
23:07:02 : wParam : 2004, lParam = 45
23:07:02 : wParam : 2004, lParam = 46
23:07:02 : wParam : 2004, lParam = 47
23:07:03 : wParam : 2004, lParam = 48
23:07:03 : wParam : 2004, lParam = 49
23:07:03 : wParam : 2003, lParam = 96
23:07:03 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
23:07:03 : wParam : 2004, lParam = 50
23:07:03 : Step : TYPE_WPARAM_IFX_DN_POS
23:07:05 : wParam : 2004, lParam = 51
23:07:07 : wParam : 2004, lParam = 52
23:07:08 : wParam : 2004, lParam = 53
23:07:10 : wParam : 2004, lParam = 54
23:07:12 : wParam : 2004, lParam = 55
23:07:14 : wParam : 2004, lParam = 56
23:07:15 : wParam : 2004, lParam = 57
23:07:17 : wParam : 2004, lParam = 58
23:07:19 : wParam : 2004, lParam = 59
23:07:20 : wParam : 2004, lParam = 60
23:07:22 : wParam : 2004, lParam = 61
23:07:24 : wParam : 2004, lParam = 62
23:07:26 : wParam : 2004, lParam = 63
23:07:27 : wParam : 2004, lParam = 64
23:07:29 : wParam : 2004, lParam = 65
23:07:31 : wParam : 2004, lParam = 66
23:07:33 : wParam : 2004, lParam = 67
23:07:34 : wParam : 2004, lParam = 68
23:07:36 : wParam : 2004, lParam = 69
23:07:38 : wParam : 2004, lParam = 70
23:07:39 : wParam : 2004, lParam = 71
23:07:41 : wParam : 2004, lParam = 72
23:07:43 : wParam : 2004, lParam = 73
23:07:44 : wParam : 2004, lParam = 74
23:07:46 : wParam : 2004, lParam = 75
23:07:48 : wParam : 2004, lParam = 76
23:07:50 : wParam : 2004, lParam = 77
23:07:51 : wParam : 2004, lParam = 78
23:07:53 : wParam : 2004, lParam = 79
23:07:55 : wParam : 2004, lParam = 80
23:07:56 : wParam : 2004, lParam = 81
23:07:58 : wParam : 2004, lParam = 82
23:08:00 : wParam : 2004, lParam = 83
23:08:02 : wParam : 2004, lParam = 84
23:08:03 : wParam : 2004, lParam = 85
23:08:05 : wParam : 2004, lParam = 86
23:08:07 : wParam : 2004, lParam = 87
23:08:09 : wParam : 2004, lParam = 88
23:08:10 : wParam : 2004, lParam = 89
23:08:13 : wParam : 2004, lParam = 90
23:08:17 : wParam : 2004, lParam = 91
23:08:21 : wParam : 2004, lParam = 92
23:08:25 : wParam : 2004, lParam = 93
23:08:29 : wParam : 2004, lParam = 94
23:08:33 : wParam : 2004, lParam = 95
23:08:37 : wParam : 2004, lParam = 96
23:08:41 : wParam : 2004, lParam = 97
23:08:45 : wParam : 2004, lParam = 98
23:08:49 : wParam : 2004, lParam = 99
23:08:53 : wParam : 2004, lParam = 100
23:08:53 : wParam : 2001, lParam = 0
23:08:53 : CLGMobileHttp Class ¼Ò¸ê½ÃÀÛ.
23:08:53 : CLGMobileHttp Class ¼Ò¸ê...
23:08:53 : CleanModelDll() : Free Model.dll
23:08:53 : _DetachDLL Call
23:08:53 : _DetachDLL Call End
23:08:54 : Step : S/W Upgrade Complete!
23:10:15 : =======Cancel button click : m_nStep(9)
Smart flash tool, selecting CP and AP bin, normal mode and not selecting`erase entire CP`.
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.2 Sec SI RAM writing start
00:02.2 Sec :Trying to communicate with IFX modem
00:07.6 Sec :Confirm IFX communication
00:07.6 Sec SI RAM writing end
00:07.6 Sec :Start PSI RAM
00:07.7 Sec :EBL writing start
00:24.0 Sec :Start EBL
00:24.0 Sec :Set capabilities to be used
00:26.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:26.3 Sec :Set flash ID complete
00:26.3 Sec :Set Infineon CFI Information 1
00:26.3 Sec :Set Infineon CFI Information 2
00:26.3 Sec SI Download start
00:26.4 Sec :Set FLASH address
00:26.5 Sec SI Download success
00:26.5 Sec :SLB Download start
00:26.6 Sec :Set FLASH address
00:27.5 Sec :SLB Download success
00:27.5 Sec :Aeneas Download start
00:28.5 Sec :Erase was executed rightly!
00:28.5 Sec :Set FLASH address
00:30.5 Sec :Aeneas Download success
then it gives me a pop up saying that `magic number does not coincide`.
ricardo.damico said:
Smart flash tool, selecting CP and AP bin, normal mode and not selecting`erase entire CP`.
00:00.0 Sec ownload Start...
00:02.0 Sec :RomBinary Download start
00:02.2 Sec SI RAM writing start
00:02.2 Sec :Trying to communicate with IFX modem
00:07.6 Sec :Confirm IFX communication
00:07.6 Sec SI RAM writing end
00:07.6 Sec :Start PSI RAM
00:07.7 Sec :EBL writing start
00:24.0 Sec :Start EBL
00:24.0 Sec :Set capabilities to be used
00:26.0 Sec :Baudrate Change: 115200bps ===> 3000000bps
00:26.3 Sec :Set flash ID complete
00:26.3 Sec :Set Infineon CFI Information 1
00:26.3 Sec :Set Infineon CFI Information 2
00:26.3 Sec SI Download start
00:26.4 Sec :Set FLASH address
00:26.5 Sec SI Download success
00:26.5 Sec :SLB Download start
00:26.6 Sec :Set FLASH address
00:27.5 Sec :SLB Download success
00:27.5 Sec :Aeneas Download start
00:28.5 Sec :Erase was executed rightly!
00:28.5 Sec :Set FLASH address
00:30.5 Sec :Aeneas Download success
then it gives me a pop up saying that `magic number does not coincide`.
Click to expand...
Click to collapse
i was doing it on windows 7 x64... yesterday i tried going to a friends place and use his windows xp sp3 x86 machine, but to no avail - i found p720h files, tried flashing them but i still got the lg logo bootloop. help is appreciated!
Use kdz method.
After it is flashed get into your recovery menu and factory reset it.
(You won't have CWM you will have stock recovery menu so use the right keys to boot into it.)
It should be ok after that
xbsall said:
Use kdz method.
After it is flashed get into your recovery menu and factory reset it.
(You won't have CWM you will have stock recovery menu so use the right keys to boot into it.)
It should be ok after that
Click to expand...
Click to collapse
i couldnt enter stock recovery menu after flashing with lg flashtool, it froze on the LG logo when i started with pressing 3d button + vol down and power....
is there something wrong with my procedure? i believe i found the right kdz for my phone, its even branded from telcel, but the BB from the kdz is V10a, mine was V08A stock.. does it interfere with the kdz flashing?
thanks for the help
official recovery
ricardo.damico said:
i couldnt enter stock recovery menu after flashing with lg flashtool, it froze on the LG logo when i started with pressing 3d button + vol down and power....
is there something wrong with my procedure? i believe i found the right kdz for my phone, its even branded from telcel, but the BB from the kdz is V10a, mine was V08A stock.. does it interfere with the kdz flashing?
thanks for the help
Click to expand...
Click to collapse
To enter in official recovery, turn off the cel (remove battery, or whatever) turn on the phone by pressing power button + 3D button + vol. down, so when lg logo appear, keep holding vol down + 3D button, and release power button, try this, here worked.
sry my poor english!
Same problem. Not solved yet!
ricardo.damico said:
i was doing it on windows 7 x64... yesterday i tried going to a friends place and use his windows xp sp3 x86 machine, but to no avail - i found p720h files, tried flashing them but i still got the lg logo bootloop. help is appreciated!
Click to expand...
Click to collapse
I get the message: Magic number does not coincide. I have the correct KDZ file V10A_00.kdz from Vivo/Brazil. I'm using Windows XP SP3 and all the process works, except by the message above. The previous rom was the V08A. I tried the fastboot from "wkpark" and now my phone get stucked at the grey fastboot v0.5 and grey LG logo. Sometimes it appears in blue (fastboot v0.5), but I don't know what to do. Any help?:fingers-crossed:
willianpsilva said:
I get the message: Magic number does not coincide. I have the correct KDZ file V10A_00.kdz from Vivo/Brazil. I'm using Windows XP SP3 and all the process works, except by the message above. The previous rom was the V08A. I tried the fastboot from "wkpark" and now my phone get stucked at the grey fastboot v0.5 and grey LG logo. Sometimes it appears in blue (fastboot v0.5), but I don't know what to do. Any help?:fingers-crossed:
Click to expand...
Click to collapse
Me too, same cellphone, and same problem, Tryed with Win Xp, Win 7 32bit and Win 7 64 Bit, and same error, you know where I can donwload the V08 KDZ ? you have it ? I am with my cellphone erased about a Week. Just waiting for a good kdz or binary file.
use only octopus lg original tool for bricked lg phones!
http://octopusbox.com/

Brick P92

Hi,
i have a Win 8 and a Win 7 Laptop.
I tried to upgrade my P920 to ICS, but it failed in the middle of the upgrade (60%).
I now have a brick P920.
When i upgrade again, i have following error message:
116:39:30 : wParam : 2004, lParam = 17
6:38:16 : [C:\LGMobileUpgrade] Try to delete folder
16:38:16 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
16:38:16 : Start Date : 2013-07-31 16:38:16
16:38:16 : ---------- QM Testmode ---------
16:38:16 : ***** Check Tool Version *****
16:38:16 : Tool version : 1.5.4.8
16:38:16 : UpgradeDLL version : 1.2.6.7
16:38:16 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
16:38:16 : LGE USB Driver Version :
16:38:16 : Android PDLV Version :
16:38:16 : Android NDLV Version :
16:38:16 : ******************************************
16:38:16 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
16:38:16 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
16:38:16 : SetEmerModeAT()
16:38:16 : _IsConnectedPhone Call
16:38:38 : _IsConnectedPhone(2)
16:38:38 : 0 - NotConnected.
16:38:38 : 1 - Normal connect success
16:38:38 : 2 - Emergency connect success
16:38:38 : *****CheckOS Start********
16:38:38 : Microsoft_Windows7_Home Edition_Service Pack 1
16:38:38 : *****CheckPCSyncPrograms Start*****
16:38:38 : PCSyncPrograms Not Found - OK and ready to upgrade
16:38:38 : Checking the connection with the cell phone...
16:38:38 : dwWaitResetTime(40000 ms)
16:38:39 : Phone Mode(2)
16:38:39 : *****GetPhoneType Start*****
16:38:39 : Phone Type : OMAP_IFX
16:38:39 : *****GetPhoneBinaryVersion Start*****
16:38:39 : *****Get ESN / IMEI / MEID Start*****
16:38:39 : Phone type Compare start
16:38:39 : *****CheckPCSyncPrograms Start*****
16:38:40 : PCSyncPrograms Not Found - OK and ready to upgrade
16:38:41 : ****************CheckAndDownload****************** **
16:38:41 : ******Extract Start C:\Users\Desktop\LG\V30A_00.kdz*****
16:38:41 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
16:38:41 : File Size = 372394796
16:38:43 : Extract kdz file Success.
16:38:44 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V30A.wdb\n
16:38:44 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V30A.wdb )
16:38:44 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP920.dll\n
16:38:44 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP920.d ll)
16:38:44 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb)
16:38:44 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP920.dl l)
16:38:44 : Extract End C:\Users\Desktop\LG\V30A_00.cab
16:38:44 : ------------------Model.dll Information-------------------
16:38:44 : Filename : LGP920.dll
16:38:44 : Version : 1.0.0.5
16:38:44 : File size : 266240
16:38:44 : File date : 2013/02/18-21:25:00
16:38:44 : PC Created date: 2013/07/31-16:38:44
16:38:44 : ----------------------------------------------------------
16:38:44 : *****Check LGCM Programs Start*****
16:38:44 : LGCM Programs Not Found - OK and ready to upgrade
16:38:44 : *****WorkModelDLL Start*****
16:38:56 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone \V30A.wdb)
16:38:56 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
16:38:56 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LG P920.dll)
16:38:56 : _DetachDLL Call
16:38:56 : _DetachDLL Call End
16:38:56 : Call fn_StartUpgrade
16:38:56 : ********* 2Chip Model.dll input Parameter*************
16:38:56 : MODEL_EVENT : 32769
16:38:56 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V30A.wdb
16:38:56 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
16:38:56 : BootWaitTime : 49500
16:38:56 : UsbHighSpeed : FALSE
16:38:56 : PhoneMode : 2
16:38:56 : NewPhoneBinVersion : V30A_00
16:38:56 : ClearSI : FALSE
16:38:56 : AuthMark : 0
16:38:56 : ********* 2Chip Model.dll input Parameter End*************
16:39:01 : wParam : 2004, lParam = 7
16:39:01 : Step : TYPE_WPARAM_IFX_DN_POS
16:39:01 : wParam : 2007, lParam = 0
16:39:01 : Step : TYPE_WPARAM_READ_FILES
16:39:01 : wParam : 2004, lParam = 8
16:39:01 : Step : TYPE_WPARAM_IFX_DN_POS
16:39:08 : wParam : 2004, lParam = 9
16:39:08 : wParam : 2004, lParam = 10
16:39:09 : wParam : 2003, lParam = 97
16:39:09 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
16:39:09 : wParam : 2004, lParam = 15
16:39:09 : Step : TYPE_WPARAM_IFX_DN_POS
16:39:15 : wParam : 2004, lParam = 1616:40:00 : wParam : 2010, lParam = 3013
16:40:00 : CleanModelDll() : Free Model.dll
16:40:00 : _DetachDLL Call
16:40:00 : _DetachDLL Call End
16:40:00 : Page_Error ºÎºÐÀÔ´Ï´Ù
16:40:00 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
It normally stops at 17%, sometimes 50%.
Any suggestions?
I use KDZ_Flash-Package_LG_P920.
These instructions just worked for me with a relatively similar situation:
http://forum.xda-developers.com/showthread.php?p=39269819

Kdz uptader problem

hello when i flash kdz 20c i see this
14:09:18 : Launching SW update
14:09:18 : Unpacking KDZ
14:09:38 : KDZ file extraced
14:09:43 : Files were extracted.
14:09:43 : LGMobileDL Load.
14:09:43 : Port = -1
14:09:43 : Connecting to phone
14:09:53 : Check Phone mode = 1
14:10:11 : Phone type check.......
14:10:15 : LGMobileDL.DLL Loading....
14:10:15 : _SetAuthMark Fail
14:10:15 : AuthMark° Į¤Č®Č÷ Phoneæ Write µĒĮö ¾Ź¾Ņ½Ą´Ļ´Ł!
14:10:15 : _SetAuthMark Fail
14:10:15 : LoadCDMAPhoneData() Error
14:10:15 : _DetachDLL Call
14:10:15 : _DetachDLL Call End
14:10:15 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\DZ_LGP500AT-00-V20c-BAL-XXX-JUN-27-2011+0.dz
14:10:15 : Param : moduleDir =
14:10:15 : Param : waitTime = 0
14:10:15 : Param : UsbHighSpeed = 1
14:10:15 : Param : PhoneMode = 1
14:10:15 : Param : BinVersion = V20C_00
14:10:15 : Param : AuthMark = 0
14:10:15 : Call fn_StartUpgrade
14:10:55 : Smart : wParam = 100, lParam = 1002
14:10:55 : Step : Upgrade Error error code = 1002
14:10:55 : ResetStartInfo() Call
14:10:55 : _DetachDLL Call
14:10:55 : _DetachDLL Call End
14:10:55 : FreeLibrary Call
14:10:55 : FreeLibrary Call End
14:10:55 : ResetStartInfo() Call
what can i solve the problem
fastantu47 said:
hello when i flash kdz 20c i see this
14:09:18 : Launching SW update
14:09:18 : Unpacking KDZ
14:09:38 : KDZ file extraced
14:09:43 : Files were extracted.
14:09:43 : LGMobileDL Load.
14:09:43 : Port = -1
14:09:43 : Connecting to phone
14:09:53 : Check Phone mode = 1
14:10:11 : Phone type check.......
14:10:15 : LGMobileDL.DLL Loading....
14:10:15 : _SetAuthMark Fail
14:10:15 : AuthMark° Į¤Č®Č÷ Phoneæ Write µĒĮö ¾Ź¾Ņ½Ą´Ļ´Ł!
14:10:15 : _SetAuthMark Fail
14:10:15 : LoadCDMAPhoneData() Error
14:10:15 : _DetachDLL Call
14:10:15 : _DetachDLL Call End
14:10:15 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\DZ_LGP500AT-00-V20c-BAL-XXX-JUN-27-2011+0.dz
14:10:15 : Param : moduleDir =
14:10:15 : Param : waitTime = 0
14:10:15 : Param : UsbHighSpeed = 1
14:10:15 : Param : PhoneMode = 1
14:10:15 : Param : BinVersion = V20C_00
14:10:15 : Param : AuthMark = 0
14:10:15 : Call fn_StartUpgrade
14:10:55 : Smart : wParam = 100, lParam = 1002
14:10:55 : Step : Upgrade Error error code = 1002
14:10:55 : ResetStartInfo() Call
14:10:55 : _DetachDLL Call
14:10:55 : _DetachDLL Call End
14:10:55 : FreeLibrary Call
14:10:55 : FreeLibrary Call End
14:10:55 : ResetStartInfo() Call
what can i solve the problem
Click to expand...
Click to collapse
You may want to have a look at this post.

problem flash p505 with kdz

hi i flash cm android 4.1.2 in my p505 but no network and no baseband after flash cm so i want to comeback to orginal firmware V20F_00.kdz but error with kdz updater
this is my log
12:24:20 : Launching SW update
12:24:20 : Unpacking KDZ
12:24:31 : KDZ file extraced
12:24:34 : Files were extracted.
12:24:34 : LGMobileDL Load.
12:24:34 : Port = 6
12:24:34 : Connecting to phone
12:24:50 : Check Phone mode = 1
12:25:28 : Phone type check.......
12:26:11 : _DetachDLL Call
12:26:11 : _DetachDLL Call End
12:26:11 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LGP505AT-01-V20f-310-410-DEC-22-2011+0-DZ.dz
12:26:11 : Param : moduleDir =
12:26:11 : Param : waitTime = 33000
12:26:11 : Param : UsbHighSpeed = 0
12:26:11 : Param : PhoneMode = 1
12:26:11 : Param : BinVersion = V20F_00
12:26:11 : Param : AuthMark = 0
12:26:11 : Call fn_StartUpgrade
12:26:18 : CDMA: wParam = 100, lParam = 2
12:26:18 : Step : Upgrade Error2 - Error Code : 2
12:26:18 : ResetStartInfo() Call
12:26:18 : _DetachDLL Call
12:26:18 : _DetachDLL Call End
12:26:18 : FreeLibrary Call
12:26:18 : FreeLibrary Call End
12:26:18 : ResetStartInfo() Call End
12:26:19 : ===FINISHED===
12:28:14 : OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate

Categories

Resources