[Q] HTC Sensation boot problem - HTC Sensation

Hi,
I have problem with my HTC Sensation, it is not booting.
Phone hung at HTC screen...
I tryed to go to Recovery Boot and reset phone, but have same issue - phone is not booting.
Please, help me, how to solve problem.

Hello shuhashuhashuha,
May I know what have you done to your phone?
Like flashing superwipe, flashing ics, etc.
Get back to me soon.
Cheers.

Hi CursedBat,
nothing..
Phone lost radio signal and I rebooted it... After it I can't boot phone.

shuhashuhashuha said:
Hi CursedBat,
nothing..
Phone lost radio signal and I rebooted it... After it I can't boot phone.
Click to expand...
Click to collapse
Can you use adb ?? if so then try to see the output of adb logcat .
It will give you some clue.
By the way is your device S-OFF and rooted ?? If so then u can flash a new ROM.
If you are S-ON and unrooted then download and flash the official RUU.

Tell us a bit more about your phone and what you did. Have you flashed new firmware?

musarraf172 said:
Can you use adb ?? if so then try to see the output of adb logcat .
It will give you some clue.
By the way is your device S-OFF and rooted ?? If so then u can flash a new ROM.
If you are S-ON and unrooted then download and flash the official RUU.
Click to expand...
Click to collapse
Hi,
my phone is S-On and not rooted.
I installed drivers and ADB. But while trying to do adb devices I got empty list of devices - just:
List of devices attached

erkan79 said:
Tell us a bit more about your phone and what you did. Have you flashed new firmware?
Click to expand...
Click to collapse
Hi,
nothing was done.
So, I understood that I need :
1) to make my phone visible via ADB
2) make s-off
3) flash new RUU
Phone can't to be recognized by ADB...

shuhashuhashuha said:
Hi,
nothing was done.
So, I understood that I need :
1) to make my phone visible via ADB
2) make s-off
3) flash new RUU
Phone can't to be recognized by ADB...
Click to expand...
Click to collapse
To connect to your phone via adb , you don't need S-OFF. How did you install adb driver ?? Any manual method??
I will suggest you to install HTC Sync . This will automatically install driver for all HTC devices.
Then you can connect via adb...
If you want to install any custom rom then your device should be S-OFF and custom recovery installed.

Related

[Q] Sensation stuck at white sceen with htc logo

Hi everyone, noob here.
I tried to instal a custom rom on my phone but messed it up real bad.
when i hold the volume down and press the power button this comes in.
***UNLOCKED***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34
i flashed the kernel without knowing what it was, and since then nothing works. i didnt make a backup or anything. i know real stupid what i did but pls help me
S-ON, and the phone is not rooted.
To my knowledge if you are still s-on you need to flash your boot.img every boot. I'm assuming you have a custom recovery right? If so just follow the steps to installing a custom rom and it might fixed it. If this works get 4ext and flash the rom using its "smart flash" function (that what I think it is called) this way you no longer need to flash the boot.img every boot.
here is a link to a guide for flashing with htc dev unlock.
thank you soooo much flare4000. my phone is up and running again!
No problem, next time pay attention to what you are doing okay? And make sure you make a nandroid, when flashing a rom.
Please help
Alright so i am s-on but when i flashed the rom from ViperS 1.6.2 its now stuck on the htc logo i was trying to flash the bootimg from fast-boot but when i connected my phone to the computer the phone says fastboot usb but i tryed installing adb drivers or that thing to my computer because I got my phone from craigslist which is like ebay and it was already rooted and had a rom but my question is i installed the adb drivers and went to run it so i can manually install the bootimg in fastboot but it doesnt work for me because it says it cant find the path and now im stuck with a phone that can only go to boot-loader and 4ext and also i tried installing multiple roms using smart-flash on 4ext and it still doesnt work.I still cant figure it out please HELP. any help will be greatly appreciated.
Junior2996 said:
Alright so i am s-on but when i flashed the rom from ViperS 1.6.2 its now stuck on the htc logo i was trying to flash the bootimg from fast-boot but when i connected my phone to the computer the phone says fastboot usb but i tryed installing adb drivers or that thing to my computer because I got my phone from craigslist which is like ebay and it was already rooted and had a rom but my question is i installed the adb drivers and went to run it so i can manually install the bootimg in fastboot but it doesnt work for me because it says it cant find the path and now im stuck with a phone that can only go to boot-loader and 4ext and also i tried installing multiple roms using smart-flash on 4ext and it still doesnt work.I still cant figure it out please HELP. any help will be greatly appreciated.
Click to expand...
Click to collapse
format all partitions except sdcard from 4ext
enable smartflash
flash the rom
see if it works
about the boot.img:
place it in the folder where you have adb and fastboot files
open there a command window and do the command
rzr86 said:
format all partitions except sdcard from 4ext
enable smartflash
flash the rom
see if it works
about the boot.img:
place it in the folder where you have adb and fastboot files
open there a command window and do the command
Click to expand...
Click to collapse
i tryed to but it says no path and the other thing i installed the rom and it says its installed on my 4ext but when i reboot still it stays on the htc logo for like 7 seconds then goes black then goes on the htc logo. i also got the phone from someone else and it was already rooted so i tryed installing adb and fastboot files but i dont know how to connect them together like connecting the fastboot to the adb files i have on my computer or do you suggest something else.
Junior2996 said:
i tryed to but it says no path and the other thing i installed the rom and it says its installed on my 4ext but when i reboot still it stays on the htc logo for like 7 seconds then goes black then goes on the htc logo. i also got the phone from someone else and it was already rooted so i tryed installing adb and fastboot files but i dont know how to connect them together like connecting the fastboot to the adb files i have on my computer or do you suggest something else.
Click to expand...
Click to collapse
are you sure you have sdk tools installed?(adb,fastboot)
see here
http://forum.xda-developers.com/showthread.php?t=1152148
also do you have htc drivers installled?
rzr86 said:
are you sure you have sdk tools installed?(adb,fastboot)
see here
http://forum.xda-developers.com/showthread.php?t=1152148
also do you have htc drivers installled?
Click to expand...
Click to collapse
i was confused but now i understand thanks for helping me out got my phone working again
Junior2996 said:
i was confused but now i understand thanks for helping me out got my phone working again
Click to expand...
Click to collapse
I have the exact same problem and I'm still confused. Can you tell me how you fixed it. Thanks
roidoran said:
I have the exact same problem and I'm still confused. Can you tell me how you fixed it. Thanks
Click to expand...
Click to collapse
post your bootloader details
roidoran said:
I have the exact same problem and I'm still confused. Can you tell me how you fixed it. Thanks
Click to expand...
Click to collapse
just tell me your bootloader details
roidoran said:
I have the exact same problem and I'm still confused. Can you tell me how you fixed it. Thanks
Click to expand...
Click to collapse
Well I was confused because I thought SDK or adb was a program that you set for a individual device but I set the adbs already for my tf300t so I just used the same fast boot folder I used for my tf300t so I'm guessing all you have to do is look up how to install SDK or adb files for fast boot and install HTC drivers. That should solve your problem or if you did what I did about the tf300t thing then just plug in your device activate fast boot by going into your hboot. Then you open up your adb folder you placed in your c drive and hold shift right click open command there and then take the bootimg and paste it in your same adb folder directly and flash with command flash boot bootimg then it should boot up into your ROM and if you have anymore questions ask me. Also can someone correct me if I'm wrong on the bootimg command.
Do forget to hit the like button if I helped you
rzr86 said:
post your bootloader details
Click to expand...
Click to collapse
Unlocked
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
eMMC-boot
Here is how I got here:
I successfully followed this guide http://forum.xda-developers.com/showthread.php?t=1631861 but did not flash any rom. Than I tried updating to ICS- everything installed fine but when it restarted stayed on white htc logo. I tried flashing other roms and now its doing the same thing but it keeps going on and off to white htc logo. I have a TMO sensation. thanks
roidoran said:
Unlocked
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
eMMC-boot
Here is how I got here:
I successfully followed this guide http://forum.xda-developers.com/showthread.php?t=1631861 but did not flash any rom. Than I tried updating to ICS- everything installed fine but when it restarted stayed on white htc logo. I tried flashing other roms and now its doing the same thing but it keeps going on and off to white htc logo. I have a TMO sensation. thanks
Click to expand...
Click to collapse
depending from your hboot version you have gb firmware
so any ics rom won't boot in your device
with your hboot version you have to follow revolutionary.io method to S-OFF
because only with S-OFF you can upgrade your firmware
see here
http://revolutionary.io/
and then for upgrading firmware see here
http://forum.xda-developers.com/showthread.php?t=1459767 (here follow the instructions carefully and check md5 sums first before flashing)
after that you can flash any ics rom

[Q] Htc sensation stuck on logo, s-on

Hello,
I have rooted htc sensation, everything was working fine till I tried to instal cm9. Instalation was ok, but phone stuck in the boot loop (animated cm guy). After that i tried to get rid of it and on some stage i flashed stock kernel. In result im stuck on htc logo. I've read a lots of stuff but i couldnt find the ansver. I still can go into boot loader and recovery. I tried full vipe didnt help. was that problem caused by installing cm on s-on? Please if anyone know how to fixe it help me - Thank you
if you are using 4ext recovery enable smartflash and install the rom again
otherwise flash the boot.img manually
i think it will help you
but i don't know if you can install cm with S-ON.
do what i said and see
rzr86 said:
if you are using 4ext recovery enable smartflash and install the rom again
otherwise flash the boot.img manually
i think it will help you
but i don't know if you can install cm with S-ON.
do what i said and see
Click to expand...
Click to collapse
Im using clocwork. By flasing manually you mean innstalling cm from recovery?
no.first see this thread
http://forum.xda-developers.com/showthread.php?t=1631861
flash 4ext recovery from step 2
then flash cm again but don't forget to enable smartflash before flashing the rom
best wishes
rzr86 said:
no.first see this thread
http://forum.xda-developers.com/showthread.php?t=1631861
flash 4ext recovery from step 2
then flash cm again but don't forget to enable smartflash before flashing the rom
best wishes
Click to expand...
Click to collapse
I did everything as You said - followed the instruction, 4ext is working, i enabled smartflash, no problems with loading cm but after reboot it stops on htc again :/. In the 4ext info section it says: Current rom cm_pyramid -userdebug 4.0.4
waglik said:
I did everything as You said - followed the instruction, 4ext is working, i enabled smartflash, no problems with loading cm but after reboot it stops on htc again :/. In the 4ext info section it says: Current rom cm_pyramid -userdebug 4.0.4
Click to expand...
Click to collapse
the only thing that i can tell you try to install another rom(check ARHD)reboot after install and see if it shows you the same
maybe requires S-OFF for cm but you told it booted fine the first time
i don't know why that happened
rzr86 said:
the only thing that i can tell you try to install another rom(check ARHD)reboot after install and see if it shows you the same
maybe requires S-OFF for cm but you told it booted fine the first time
i don't know why that happened
Click to expand...
Click to collapse
No - first time with cm it stuck in boot loop - not htc splash screen but the cm animation. So could you just tell me is there a way to turn it s-off?
waglik said:
No - first time with cm it stuck in boot loop - not htc splash screen but the cm animation. So could you just tell me is there a way to turn it s-off?
Click to expand...
Click to collapse
yes if your hboot version is 1.2x follow this thread
http://forum.xda-developers.com/showthread.php?t=1661631
the only difficult thing is to get success with the wire trick but be patient
rzr86 said:
yes if your hboot version is 1.2x follow this thread
http://forum.xda-developers.com/showthread.php?t=1661631
the only difficult thing is to get success with the wire trick but be patient
Click to expand...
Click to collapse
Thank man - will try
waglik said:
Thank man - will try
Click to expand...
Click to collapse
wait SOFF is not required..not even for cm9
reflash the rom with smartflash enabled in recovery ..then reboot to bootloader (power menu from recovery) then do the extra 1 step from SON flashing guide ..that should do
ganeshp said:
wait SOFF is not required..not even for cm9
reflash the rom with smartflash enabled in recovery ..then reboot to bootloader (power menu from recovery) then do the extra 1 step from SON flashing guide ..that should do
Click to expand...
Click to collapse
Can I use cm or stock rom? And sorry for being a pain but 1 step from that guide ( http://forum.xda-developers.com/showthread.php?t=1631861 ) is unlocking the phone, do i have to do it again?
waglik said:
Can I use cm or stock rom? And sorry for being a pain but 1 step from that guide ( http://forum.xda-developers.com/showthread.php?t=1631861 ) is unlocking the phone, do i have to do it again?
Click to expand...
Click to collapse
no you don't have to do it again.
just do what ganeshp said
rzr86 said:
no you don't have to do it again.
just do what ganeshp said
Click to expand...
Click to collapse
I opened bootloader then recovery - enabled smartfash, flashed rom (i tried 3 different ones) and after restart it still stops at htc logo :/ Am I doing something wrong?
waglik said:
I opened bootloader then recovery - enabled smartfash, flashed rom (i tried 3 different ones) and after restart it still stops at htc logo :/ Am I doing something wrong?
Click to expand...
Click to collapse
ok then.now try to flash manually the boot.img of the rom
i suppose you remember how.if not see here(extra 1)
http://forum.xda-developers.com/showthread.php?t=1631861
rzr86 said:
ok then.now try to flash manually the boot.img of the rom
i suppose you remember how.if not see here(extra 1)
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
Its working I love you guys Big thanks:good:
very happy for helping you man:good:
now play with your awesome device
rzr86 said:
ok then.now try to flash manually the boot.img of the rom
i suppose you remember how.if not see here(extra 1)
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
thank you so much ... i have looking and trying for 10 hours
what made deference is the step Extra 1: Flashing "boot.img"
after i did it finally my htc sensation is booting and i flashed my custom rom
thank you so much:fingers-crossed:
Please help
Alright so i am s-on but when i flashed the rom from ViperS 1.6.2 its now stuck on the htc logo i was trying to flash the bootimg from fast-boot but when i connected my phone to the computer the phone says fastboot usb but i tryed installing adb drivers or that thing to my computer because I got my phone from craigslist which is like ebay and it was already rooted and had a rom but my question is i installed the adb drivers and went to run it so i can manually install the bootimg in fastboot but it doesnt work for me because it says it cant find the path and now im stuck with a phone that can only go to boot-loader and 4ext and also i tried installing multiple roms using smart-flash on 4ext and it still doesnt work.I still cant figure it out please HELP. any help will be greatly appreciated.
Junior2996 said:
Alright so i am s-on but when i flashed the rom from ViperS 1.6.2 its now stuck on the htc logo i was trying to flash the bootimg from fast-boot but when i connected my phone to the computer the phone says fastboot usb but i tryed installing adb drivers or that thing to my computer because I got my phone from craigslist which is like ebay and it was already rooted and had a rom but my question is i installed the adb drivers and went to run it so i can manually install the bootimg in fastboot but it doesnt work for me because it says it cant find the path and now im stuck with a phone that can only go to boot-loader and 4ext and also i tried installing multiple roms using smart-flash on 4ext and it still doesnt work.I still cant figure it out please HELP. any help will be greatly appreciated.
Click to expand...
Click to collapse
It seems you are not typing the command correctly ..check the extra #1 step again and properly follow it to the letter
Sent from my Nexus 7 using xda premium
ganeshp said:
It seems you are not typing the command correctly ..check the extra #1 step again and properly follow it to the letter
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
i am but i can seem to connect my phone which was rooted before i got it cant connect to the adb or fasboot files so i can do the command and i tried installing the adb fasboot files but cant seem to get my sensation to connect with my computer but on the screen of the sensation it says its connected fastboot usb and the computer installs the drivers by itself by doesnt let me do the command to the phone so im wondering is there a way i can redo the fastboot to my sensation which when i got it was rooted so im guessing they used there computer to do the commands on there computer. just need to find another way can you think of one because i tried following the step on this guide on installing the adb fasboot drivers but cant seem to get the path right or something is just wrong hopefully you can understand what im saying because this happened to me about 2 days ago and i was running bruce2728's cm10 rom perfectly then and also one thing when i go into the hboot it says no bootimg but it said that even before i flash bruce2728 rom and im guessing the problem could be the bootimg but i got to get the fastboot running with my computer please help if you can i would greatly appreciate it.

[Q] Sensation CWM Backup Image

Hi guys and girls,
I got a HTC Sensation off ebay that has been flashed incorrectly and is stuck at the HTC green text boot screen. I have successfully installed CWM but I can't seem to get the right firmware on (I am using 3.32) http://forum.xda-developers.com/showthread.php?t=1412618 with the stock ICS rom. The firmware says 'parsing PG58IMG' then does nothing.
I would like to use a restore image in CWM, but as the phone arrived without one I am trying to find a ready made image I can use.
- Anyone know where one is available?
Also, I can't do all the usual fastboot stuff becuse I can't enable usb debugging, so just to get it to a usable state with any rom would be great.
Please help!!
Thanks everyone
Alex
Sensation HBOOT 1.27 and S-on, rooted
alex_cas said:
Hi guys and girls,
I got a HTC Sensation off ebay that has been flashed incorrectly and is stuck at the HTC green text boot screen. I have successfully installed CWM but I can't seem to get the right firmware on (I am using 3.32) http://forum.xda-developers.com/showthread.php?t=1412618 with the stock ICS rom. The firmware says 'parsing PG58IMG' then does nothing.
I would like to use a restore image in CWM, but as the phone arrived without one I am trying to find a ready made image I can use.
- Anyone know where one is available?
Also, I can't do all the usual fastboot stuff becuse I can't enable usb debugging, so just to get it to a usable state with any rom would be great.
Please help!!
Thanks everyone
Alex
Sensation HBOOT 1.27 and S-on, rooted
Click to expand...
Click to collapse
1. As you are SON you cant flash a firmware ..you need SOFF for that. Also you are having hboot 1.27 so that means you are already on 3.32 firmware ..so you can skip flashing firmware part
2. As you didnt have any nandroid backup ..start fresh and flash a custom ROM ..for flashing Custom ROM read the next point.
3. As you are SON and have HTC-DEV unlocked bootloader its better to have 4EXT recovery rather than CWM ...as it helps you in the process
Start completely fresh and flash using this guide (tip: follow it to the letter )
ganeshp said:
1. As you are SON you cant flash a firmware ..you need SOFF for that. Also you are having hboot 1.27 so that means you are already on 3.32 firmware ..so you can skip flashing firmware part
2. As you didnt have any nandroid backup ..start fresh and flash a custom ROM ..for flashing Custom ROM read the next point.
3. As you are SON and have HTC-DEV unlocked bootloader its better to have 4EXT recovery rather than CWM ...as it helps you in the process
Start completely fresh and flash using this guide (tip: follow it to the letter )
Click to expand...
Click to collapse
Thanks for the reply, but I can't start with the guide because the phone won't connect to the PC for adb access; I cant enable usb debugging because can't access the operating system menu.
All i can do at this stage is load up roms and flashes to the SD card by putting it in a card reader, then running it in phone via recovery. I am a little stuck :/
alex_cas said:
Thanks for the reply, but I can't start with the guide because the phone won't connect to the PC for adb access; I cant enable usb debugging because can't access the operating system menu.
All i can do at this stage is load up roms and flashes to the SD card by putting it in a card reader, then running it in phone via recovery. I am a little stuck :/
Click to expand...
Click to collapse
read the guide again ..whenever steps with adb commands are given ..immediately there will be a next step saying .."if you cant boot the phone then do extra 4 step"
So you can very well do all the steps if you can go to bootloader and has fastboot on your pc (usb debugging is not required either )

[Q] HTC Desire S stuck at HTC sCreen

Hi everyone I am having a problem with my phone.
It just sits at htc logo . i have TWRP installed and S-off and can install roms have tried a few i think are for my phone and some install ICS 2.0 did fine and SagaSD but when i reboot get the same htc logo??
Can anyone help me find the right rom for it to fix the hang on logo screen?
Thanks :fingers-crossed:
***unlocked***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-BOOT
aug 22 2011,15:22:13
ukgt-I9000 said:
Hi everyone I am having a problem with my phone.
It just sits at htc logo . i have TWRP installed and S-off and can install roms have tried a few i think are for my phone and some install ICS 2.0 did fine and SagaSD but when i reboot get the same htc logo??
Can anyone help me find the right rom for it to fix the hang on logo screen?
Thanks :fingers-crossed:
***unlocked***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-BOOT
aug 22 2011,15:22:13
Click to expand...
Click to collapse
boot.img? Or panel type?
how would i do that? i cant use usb on the phone except for usb storagr in twrp
Thanks
ok so iv been doing more research and i think i have a hitachi screen and this dosent support certain roms because of 2x/3x kernel . so could anyone advise me which roms and kernel to download that woudl work?
ukgt-I9000 said:
ok so iv been doing more research and i think i have a hitachi screen and this dosent support certain roms because of 2x/3x kernel . so could anyone advise me which roms and kernel to download that woudl work?
Click to expand...
Click to collapse
If you have done your research then you must have found the thread [GUIDE][6 OCT] Non-Sony Screen Panel Desire S Users Lounge + How-To which gives you everything you can ever possibly need.
Reply
SimonTS said:
If you have done your research then you must have found the thread [GUIDE][6 OCT] Non-Sony Screen Panel Desire S Users Lounge + How-To which gives you everything you can ever possibly need.
Click to expand...
Click to collapse
While this guide is useful and i have read it iv downloaded cyanogen the correct version for my phone according to it butdo i need to flash a kernel after i flash the rom?
ukgt-I9000 said:
While this guide is useful and i have read it iv downloaded cyanogen the correct version for my phone according to it butdo i need to flash a kernel after i flash the rom?
Click to expand...
Click to collapse
Yes. If ur s-on u must always flash boot.img via fastboot commands straight after u flash the rom.
Reply
jmcclue said:
Yes. If ur s-on u must always flash boot.img via fastboot commands straight after u flash the rom.
Click to expand...
Click to collapse
Oh really?? i didnt know that but i cant do that my phone dosent copnnect to the usb i dont think coz it dosent show up in odin but itcharges. Could i still do it through twrp maybe? i can mount the storage and it works .
also what do i type to do it? is it in cmd i do it?
Thanks
ukgt-I9000 said:
Oh really?? i didnt know that but i cant do that my phone dosent copnnect to the usb i dont think coz it dosent show up in odin but itcharges. Could i still do it through twrp maybe? i can mount the storage and it works .
also what do i type to do it? is it in cmd i do it?
Thanks
Click to expand...
Click to collapse
It won't show up in odin, that's for Samsung devices.
You'll need adb and fastboot set up on your computer.
Look at the steps in tutorials in the desire s general section for the correct procedure for flashing the boot.img.
Reply
teadrinker said:
It won't show up in odin, that's for Samsung devices.
You'll need adb and fastboot set up on your computer.
Look at the steps in tutorials in the desire s general section for the correct procedure for flashing the boot.img.
Click to expand...
Click to collapse
I have adb and fastboot when i click adb it flicks up for a second like a terminal but goes away and if my laptop dosent recognize it through usb will it still work ? i will endevour to try this method so thank u ill let u know if i figure it out r not lol :fingers-crossed:
ukgt-I9000 said:
I have adb and fastboot when i click adb it flicks up for a second like a terminal but goes away and if my laptop dosent recognize it through usb will it still work ? i will endevour to try this method so thank u ill let u know if i figure it out r not lol :fingers-crossed:
Click to expand...
Click to collapse
You don't "click" on ADB. You need to open a command line window and run the relevant ADB command from there. Search, there is a very good ADB guide somewhere on XDA with everything you will ever need.
Re
SimonTS said:
You don't "click" on ADB. You need to open a command line window and run the relevant ADB command from there. Search, there is a very good ADB guide somewhere on XDA with everything you will ever need.
Click to expand...
Click to collapse
Ok i think iv figured out fastboot can run commands and stuff on it seems cool.
But The problem I have now is that my usb dosent show the phone it charges but dosent recognize it in the bottom corner?
Iv installed drivers for it etc
Is that coz i messed up the rom ?
Fasboot isnt picking it up
Is your phone in fastboot mode? (reboot to bootloader, should say fastboot USB at the top)
UPDATE
Ok so now I have a laptop that will recognise it and drivers installed I tried RUU official 4.0 stock or ROM update Utility 1.0.6.2012 . It finds phone fine and gets through all the steps but when it is updating signature it cuts off and i get ERROR 155 : UNKMOWN ERROR.
Is this the right RUU stock?
It said it was updating image version 13 ( bunch of number) to 14( bunch of numbers)
Anyone know a RUU STOCK Rom that would work ?
ukgt-I9000 said:
Ok so now I have a laptop that will recognise it and drivers installed I tried RUU official 4.0 stock or ROM update Utility 1.0.6.2012 . It finds phone fine and gets through all the steps but when it is updating signature it cuts off and i get ERROR 155 : UNKMOWN ERROR.
Is this the right RUU stock?
It said it was updating image version 13 ( bunch of number) to 14( bunch of numbers)
Anyone know a RUU STOCK Rom that would work ?
Click to expand...
Click to collapse
why do you want installing stock RUU..?, or do you want your phone to return to the stock..?, what do you wanted exactly..?
if you wanna installing custom rom..then you just need find a custom rom you want (find the right custom rom that are still had compatible kernel for hitachi or mddi panel)..then flashing it through TWRP recovery..after that..you must flashing boot.img (the kernel is already included in this boot.img) that are extracted from the custom rom.zip that you're already installed..flashing it through FASTBOOT mode..with fastboot command "fastboot flash boot boot.img"
hopefully this can help...

[Q] Desire S flash without Fastboot USB

Hello xda-developers Boardusers ,
ive got an HTC Desire S and wanted to flash it..
The CWM is installed but since then i cant conntect it to the PC anymore.
Maybe its the USB-Port of the Phone..
Is it possible to update my ROM without Fastboot.. The Phone is S-ON and got an T-Mobile Branding.
I tried to update the ROM but then it stops booting at the T-Mobilelogo.
And if i extract the RUU 4.0.4 and rename it on the SdCard to PG88IMG.. It starts to load but.. But it wont let me flash it because when its finished with loading it just go back to the Mainmenu.
I would really appreciate your help.
Silberpfote said:
Hello xda-developers Boardusers ,
ive got an HTC Desire S and wanted to flash it..
The CWM is installed but since then i cant conntect it to the PC anymore.
Maybe its the USB-Port of the Phone..
Is it possible to update my ROM without Fastboot.. The Phone is S-ON and got an T-Mobile Branding.
I tried to update the ROM but then it stops booting at the T-Mobilelogo.
And if i extract the RUU 4.0.4 and rename it on the SdCard to PG88IMG.. It starts to load but.. But it wont let me flash it because when its finished with loading it just go back to the Mainmenu.
I would really appreciate your help.
Click to expand...
Click to collapse
I think you have to be s off for that or unlocked boot loader which requires PC connection.
Sent from my Desire S using XDA Free mobile app
lilsafbig said:
I think you have to be s off for that or unlocked boot loader which requires PC connection.
Forgot to say that my Bootloader is unlocked too
Click to expand...
Click to collapse
Silberpfote said:
Forgot to say that my Bootloader is unlocked too
Click to expand...
Click to collapse
the ruu dont work Because ur bootloader is unlocked. u need to relock ur bootloader using fastboot commands before a ruu will run.
how do u charge ur phone if usb dont work??
jmcclue said:
the ruu dont work Because ur bootloader is unlocked. u need to relock ur bootloader using fastboot commands before a ruu will run.
how do u charge ur phone if usb dont work??
Click to expand...
Click to collapse
Charging accually works.. But the Phone wont go into "Fastboot USB".. So im unable to Relock it. Or is there a posibility to Relock it using the CWM?
A Custom Rom would be fine too.. And i tried on and installed it with the CWM. But it stops booting at the Tmobilelogo.
I tried a Goldcard to with the CID TMOB101 but that didnt worked as well.
But dont know if this acually the right CID. I found this one on the internet.. Is there a way to find the CID without fastboot?
Silberpfote said:
Charging accually works.. But the Phone wont go into "Fastboot USB".. So im unable to Relock it. Or is there a posibility to Relock it using the CWM?
A Custom Rom would be fine too.. And i tried on and installed it with the CWM. But it stops booting at the Tmobilelogo.
I tried a Goldcard to with the CID TMOB101 but that didnt worked as well.
But dont know if this acually the right CID. I found this one on the internet.. Is there a way to find the CID without fastboot?
Click to expand...
Click to collapse
Oh rite. So use link below to setup fastboot and install drivers.
http://forum.xda-developers.com/showthread.php?t=2588979
Once thats done, reboot pc. Then boot ur phone into fastboot mode and plug it into pc, hopefully will say fastboot usb.
The reason a custom rom does not boot is because ur s-on u need to flash the boot.img inside the rom via fastboot commands. So either way we need fastboot working!! That tool above is very good
Make sure its not ur USB cable thats gone.
Sent from my Desire S using XDA Free mobile app
I tried it but i still only get "Fastboot AC".. I will try it later with a Linux
How about flashing the boot.img with the Backup option from the CWM --> http://forum.xda-developers.com/showthread.php?t=1991168
Does it work?
Would like to install the "Desire XS 1.1" Custom Rom..
And another Question.. Can i always enter the Recovery.. Because after i flashed this Custom Rom it asked me at the end to flash the boot.img if im not S-Off so i was a little bit scard and flashed my backup without turning off

Categories

Resources