Related
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Works in european version? Honda connect 2?
Enviado desde mi SM-G935F mediante Tapatalk
I don't know, maybe try it by yourself
Does anyone know if this will work for the 2017 Honda CRV? Disabling the DD VSP error setting does not allow video while in motion like it did for previous model years.
majedalanni said:
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Click to expand...
Click to collapse
Thank you for your post. I had a civic 2017 ELX in Brazil. I followed your post but in my case there were some differences. Although 3 options of car mode there are 4 types. I tried the first one and did everything like you. Everything is working except Pandora bcz i didn't see this option. Anyway, it's just for you know that in Brazilian model it work too. Once again thanks for your help.
Bright power???
where's that bright power???tnx
majedalanni said:
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Click to expand...
Click to collapse
I meant bright on the top + power + menu
hello Friend
I have 2017 civic hb.
when i follow your example steps i get 3 different vehicle model but no one like your mentioned models. all different.
Which model select I have to select?
TEAA:Gr075 DA+ KE NO 5DR
TEAA:Gr075 DA+ TR NO 5DR
TEAA:Gr075 DA+ TR NO 5 DR
Please let me know
Thanks
flima07 said:
Thank you for your post. I had a civic 2017 ELX in Brazil. I followed your post but in my case there were some differences. Although 3 options of car mode there are 4 types. I tried the first one and did everything like you. Everything is working except Pandora bcz i didn't see this option. Anyway, it's just for you know that in Brazilian model it work too. Once again thanks for your help.
Click to expand...
Click to collapse
Como vc fez parceiro, pois não consigo nem começar com as indicações do colega.
enable Pandora... From the list cannot change
Reverse sensor not working
After i done all the things, my reverse sensor not “beep beep” anymore?
Desbloquear player original
flima07 said:
Thank you for your post. I had a civic 2017 ELX in Brazil. I followed your post but in my case there were some differences. Although 3 options of car mode there are 4 types. I tried the first one and did everything like you. Everything is working except Pandora bcz i didn't see this option. Anyway, it's just for you know that in Brazilian model it work too. Once again thanks for your help.
Click to expand...
Click to collapse
Olá, tudo bem?
Em primeiro lugar, estou escrevendo em português, porque vi que vc é brasileiro.... rsrsrs
Também tenho um Civic ELX, meu é 2018. Cara, consegui fazer todo o hack certinho com o HondaHack e tal.
Só que o desbloqueio para vídeo com o player original do carro, não consigo.
Até já consegui instalar outros players de vídeo, mas eles são ruins e não possuem o recurso integrado com o volante, apenas com touch na central.
A maioria dos players não avança pasta ou não avança música, etc.... não possuem recurso aleatório, etc....
O player original é top, ele tem vários recursos, porém, mesmo com o Hack, ele funciona apenas com o freio de estacionamento acionado.
Já executei aquela opção no HondaHack para ignorar o freio de estacionamento, mas não adianta. Ao liberar o freio, o vídeo sai.
Quando na fonte de áudio, ponho USB, ele usa o player original, porém, só com o freio de estacionamento acionado é que aparece o vídeo. Soltou, some o vídeo e fica só música.
Mas daí usando a fonte como "Audio Apps", daí consigo usar um player e de boa.
Tentei comprar o Honda Hack Pro pra ver se melhorava, mas não consegui comprar, pois, vou até o PayPal e chegando lá diz que o vendedor só aceita pagamentos pelo seu site e não tem o site do honda hack.
Cara, sobre esse método novo, você conseguiu/descobriu algo?
Ou conseguiu de alguma outra forma?
==============
Hello, how are you?
First of all, I'm writing in Portuguese, because I saw that you're Brazilian .... rsrsrs
I also have a Civic ELX, mine is 2018. Man, I was able to do all the right hack with HondaHack and such.
Only the unlock for video with the original player of the car, I can not.
I've even been able to install other video players, but they are bad and do not have the integrated feature with the steering wheel, just touch with the control panel.
Most players do not advance folder or forward music, etc .... have no random feature, etc ....
The original player is top, it has several features, but even with the Hack, it works only with the parking brake applied.
I already ran that option on HondaHack to ignore the parking brake, but that's no good. When releasing the brake, the video comes out.
When in the audio source, I put USB, it uses the original player, however, only with the parking brake applied does the video appear. Dropped, add the video and there is only music.
But from there using the source as "Audio Apps", from there I use a player and good.
I tried to buy the Honda Hack Pro to see if it improved, but I could not buy it. I'll go to PayPal and get there and say that the seller only accepts payments through his site and does not have the honda hack site.
Dude, about this new method, did you get / discover anything?
Or did you get it any other way?
Thanks, it works wit Egypt model
majedalanni said:
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Click to expand...
Click to collapse
Thanks for your advice, it works with Egypt model, But I tried to install the navigation app under the vendor folder. After restarting the head unit, I get a black screen and I can’t operate it again. Tried to remove the battery cable with no luck. Any advice!!!
Hi, what do I do if I am able to access that setting on my 2016 touring but only the one option is available and not all 3?
Problems
Does it cause ant any major problems ?
HELP!!! How to solve this problem?
I tried to install the navigation app under the vendor folder. After restarting the head unit, I get a black screen and I can’t operate it again. Tried to remove the battery cable with no luck. Any advice!!!
Blank Page after step 10
Hi everyone.
Could you give a little help?
My unit was already set to Operation as OFF because of that I started from step 10, but after put file:/// and push ENTER /GO my browser not showing any folder. Only blank page.
Do you could give some orientation?
By the way, my head unit is active USB Debug and Developer Mode on. Could be this reason?
Sorry for my restricted english.
Regards
Prezado Ezeqgaria,
Eu fiz esse método antes de usar o Hondahack (que tb funcionou, mas pela minha avaliação, deixou a central mais lenta). Seguindo o tutorial que o autor preparou eu consegui desbloquear os vídeos com o carro em movimento. Eu consigo assistir vídeos de um pen drive facilmente utilizando o player original. No seu caso, acredito que o Hondahack deve estar impedindo tal uso e sugiro desinstalar o Hondahack e tentar novamente (por sua conta e risco!).
Comigo deu certo. Bom, é isso, espero ter ajudado.
=========
I will make a short translation,
I tried this method in my brazilian Honda EXL 2017 and worked. But i believe that after you installed Hondahack this affected it. So i suggested you uninstall Hondahack i make all process again (for your onw risk). Hope could help you
ezeqgarcia said:
Olá, tudo bem?
Em primeiro lugar, estou escrevendo em português, porque vi que vc é brasileiro.... rsrsrs
Também tenho um Civic ELX, meu é 2018. Cara, consegui fazer todo o hack certinho com o HondaHack e tal.
Só que o desbloqueio para vídeo com o player original do carro, não consigo.
Até já consegui instalar outros players de vídeo, mas eles são ruins e não possuem o recurso integrado com o volante, apenas com touch na central.
A maioria dos players não avança pasta ou não avança música, etc.... não possuem recurso aleatório, etc....
O player original é top, ele tem vários recursos, porém, mesmo com o Hack, ele funciona apenas com o freio de estacionamento acionado.
Já executei aquela opção no HondaHack para ignorar o freio de estacionamento, mas não adianta. Ao liberar o freio, o vídeo sai.
Quando na fonte de áudio, ponho USB, ele usa o player original, porém, só com o freio de estacionamento acionado é que aparece o vídeo. Soltou, some o vídeo e fica só música.
Mas daí usando a fonte como "Audio Apps", daí consigo usar um player e de boa.
Tentei comprar o Honda Hack Pro pra ver se melhorava, mas não consegui comprar, pois, vou até o PayPal e chegando lá diz que o vendedor só aceita pagamentos pelo seu site e não tem o site do honda hack.
Cara, sobre esse método novo, você conseguiu/descobriu algo?
Ou conseguiu de alguma outra forma?
==============
Hello, how are you?
First of all, I'm writing in Portuguese, because I saw that you're Brazilian .... rsrsrs
I also have a Civic ELX, mine is 2018. Man, I was able to do all the right hack with HondaHack and such.
Only the unlock for video with the original player of the car, I can not.
I've even been able to install other video players, but they are bad and do not have the integrated feature with the steering wheel, just touch with the control panel.
Most players do not advance folder or forward music, etc .... have no random feature, etc ....
The original player is top, it has several features, but even with the Hack, it works only with the parking brake applied.
I already ran that option on HondaHack to ignore the parking brake, but that's no good. When releasing the brake, the video comes out.
When in the audio source, I put USB, it uses the original player, however, only with the parking brake applied does the video appear. Dropped, add the video and there is only music.
But from there using the source as "Audio Apps", from there I use a player and good.
I tried to buy the Honda Hack Pro to see if it improved, but I could not buy it. I'll go to PayPal and get there and say that the seller only accepts payments through his site and does not have the honda hack site.
Dude, about this new method, did you get / discover anything?
Or did you get it any other way?
Click to expand...
Click to collapse
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- 20170829: https://mega.nz/#!tGgnXIia!AITcSq9KOvFhJvr52B4vXQfKN5PqUkv9UwGFRDNwkJI
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20170822: https://mega.nz/#!8HoXkD6A!wdawC1oCPjYWGsmTGE7zrZ2YF3cbggMi9UHlOMbmeWo
- 20170814: https://mega.nz/#!IfRUyTYK!79mgMoIrpi5G5wN9r5dR3eP1q857vDuu2LtLqrK5AAY
- 20170718: https://mega.nz/#!BHhA0IrA!UCjPq7vLbv8MFJafqXNnDtYpp9dDSUOKxL_hy5Ko8W0
Flash Tool
- Latest SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1.1 by @jemmini : https://mega.nz/#!lEUwBAzK!OSyygGsLE9UCRiHn91Fg6-kuGbXkgE2vnt7ihoWFNWw
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
Proudly provided by GearLabs (me)
Blinking the screen on BV8000 pro - is the problem of hardware and software?
Mamay2u said:
Blinking the screen on BV8000 pro - is the problem of hardware and software?
Click to expand...
Click to collapse
If the problem doesn't disappear after you restore the Stock ROM, then it is an hardware problem.
Hello,
the phone is not fully rooted, SuperSu binarys are not updateable and busy box cant be installed (my phone is encrypted).
Is there any solution to make Android multiuser/guestmode working on that phone?
Thx
Pappmann said:
Hello,
the phone is not fully rooted, SuperSu binarys are not updateable and busy box cant be installed (my phone is encrypted).
Is there any solution to make Android multiuser/guestmode working on that phone?
Thx
Click to expand...
Click to collapse
Have you followed my root guide?
About the guest/multiuser mode, you should be able to enable it by adding two lines to the build.prop file.
Code:
fw.show_multiuserui=1
fw.max_users=5
Alberto96 said:
Have you followed my root guide?
About the guest/multiuser mode, you should be able to enable it by adding two lines to the build.prop file.
Code:
fw.show_multiuserui=1
fw.max_users=5
Click to expand...
Click to collapse
i know, but that does not work, i also changed to
Code:
ro.ag.userswitch=yes
ro.remove.multiuser.switch=no
But User swich is not available in statusbar. When i add a new user, i can access to new profile but i cant switch back.
Pappmann said:
i know, but that does not work, i also changed to
Code:
ro.ag.userswitch=yes
ro.remove.multiuser.switch=no
But User swich is not available in statusbar. When i add a new user, i can access to new profile but i cant switch back.
Click to expand...
Click to collapse
They (Mediatek or the company who produces the software for Blackview) messed up the framework then.
Alberto96 said:
They (Mediatek or the company who produces the software for Blackview) messed up the framework then.
Click to expand...
Click to collapse
Is there any way to replace the statusbar/quick settings menu to stock android or a user shortcut in configuration menu or in launcher?
Im really thinking of buying this phone. My main worry is that the UBS-C port on works with the cable that comes with it and that regular headphones wont work with the headphone output on this phone. Can anyone make any of this clear?
Pappmann said:
Is there any way to replace the statusbar/quick settings menu to stock android or a user shortcut in configuration menu or in launcher?
Click to expand...
Click to collapse
Not that easy, you need to modify the SystemUI.apk.
hobs0n said:
Im really thinking of buying this phone. My main worry is that the UBS-C port on works with the cable that comes with it and that regular headphones wont work with the headphone output on this phone. Can anyone make any of this clear?
Click to expand...
Click to collapse
As regards the USB-C port, you can find compatible cables that fit (as long as the connector isn't too short, it works. For example, AUKEY ones are not compatible but iVoler ones yes), unfortunately though you are right for the headphone jack. As far as i know, there are no other headphones/earphones with a long plug.
20170814 Stock ROM added to first post.
Changelog:
- Minor bug fixes (Camera Blur issue)
Alberto96 said:
Not that easy, you need to modify the SystemUI.apk.
Click to expand...
Click to collapse
Does anyonehere have Experience to change the SystemUI.apk to stock android Statusbar/Quicksettings?
20170822 Stock ROM added to first post. Fixes all issues with Waze and Google Play. (for users being impacted by these issues)
Ciao @Alberto96 , ho da pochissimo acquistato questo grandissimo telefono dopo aver avuto il bv6000. Non mi dilungo... Ho seguito alla lettera la tua guida per il root, appena ho terminato il flash al primo avvio tenendo premuto v+ mi parte la recovery TWRP ma al riavvio successivo premendo sempre v+ mi si avvia la recovery originale.
In più riprovando e rimettendo TWRP ho seguito la procedura per installare supersu che sembra andare a buon fine ma al riavvio successivo non è tra le app e rimane sempre non rootato.
La versione di rom che ha è la V0.1_20170803_20170829-1811 è ho usato la tua versione di TWRP e di SP Flash Tool.
Cosa posso fare? Ti servono altre info? Grazie in anticipo per l'aiuto.
danielesr82 said:
Ciao @Alberto96 , ho da pochissimo acquistato questo grandissimo telefono dopo aver avuto il bv6000. Non mi dilungo... Ho seguito alla lettera la tua guida per il root, appena ho terminato il flash al primo avvio tenendo premuto v+ mi parte la recovery TWRP ma al riavvio successivo premendo sempre v+ mi si avvia la recovery originale.
In più riprovando e rimettendo TWRP ho seguito la procedura per installare supersu che sembra andare a buon fine ma al riavvio successivo non è tra le app e rimane sempre non rootato.
La versione di rom che ha è la V0.1_20170803 è ho usato la tua versione di TWRP e di SP Flash Tool.
Cosa posso fare? Ti servono altre info? Grazie in anticipo per l'aiuto.
Click to expand...
Click to collapse
Solo Inglese su XDA-Developers.
I'll summarize your question to let others who don't understand Italian know it. He is asking why the device keeps losing TWRP after a reboot, as well as SuperSU.
I guess the system partition gets mounted as read-only, thus, all changes won't get applied.
To be sure, after installing SuperSU, go to the TWRP's File Manager, browse to /system, and delete the "recovery-from-boot.p" file. Please make sure that the system partition is mounted before doing this, otherwise you will get a blank folder.
If you get an error, then it means that the system partition has been mounted as read-only. You will find the RW flag in the Settings menu.
Keep me informed
20170829 ROM added to first post, should fix all issues with camera focus.
I'm sorry to all for my bad English. Thanks for the help Alberto, it was mounted read-only.
Enabling it I managed to get on /system and delete the "recovery-from-boot.bak" file (I did not see any other names).
I tried again to install SuperSU and restart, to reflash TWRP and check that the file was always deleted, the memory enabled RW .... but at first I do not find SuperSU and I reboot the original recovery as well.
Now I'm trying again with another Windows but it does not change the situation.
PS: Looking at the log better when installing Super SU writes: Boot image patcher - Finding Boot Image - Boot image: / dev / block / mmcblk0p21 - extracting ramdisk - failure, aborting.
danielesr82 said:
I'm sorry to all for my bad English. Thanks for the help Alberto, it was mounted read-only.
Enabling it I managed to get on /system and delete the "recovery-from-boot.bak" file (I did not see any other names).
I tried again to install SuperSU and restart, to reflash TWRP and check that the file was always deleted, the memory enabled RW .... but at first I do not find SuperSU and I reboot the original recovery as well.
Now I'm trying again with another Windows but it does not change the situation.
PS: Looking at the log better when installing Super SU writes: Boot image patcher - Finding Boot Image - Boot image: / dev / block / mmcblk0p21 - extracting ramdisk - failure, aborting.
Click to expand...
Click to collapse
It sounds like a LZMA ramdisk then.
Could you try Magisk instead? https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Alberto96 said:
It sounds like a LZMA ramdisk then.
Could you try Magisk instead? https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Click to expand...
Click to collapse
I tried to install Magisk-v13.3.zip with TWRP just installed but:
Mounting /data/magisk.img to /magisk - Magisk image mount failed...
Hola a todos, les traigo este pequeño mod para eliminar las apps basuras de nuestra Rom stock
Eliminado:
System/System/app
Drive
DTVPlayer
Duo
Gmail
GooglePinyinIME
JapaneseIME
KoreanIME
Play Music
talkback
Videos
YouTube
ZhuyinIME
System/System/priv-app
DemoMode
DTVService
EasyPrefix
GuideMe
Paso 1:
Descarga TWRP ejecutable
Descarga Debloated Your Os
Paso 2:
Copia "Debloated Your Os" en tu memoria interna o externa
Paso 3:
Apaga tu dispositivo y ponlo en modo FastBoot (vol- + off)
Conectalo a la Pc
Paso 4:
Ejecuta la herramienta "TWRP Ejecutable"
Paso 5:
Flash "Debloated Your Os"
Las apps de oem aun no he logrado borrarlas debido a que en la rom stock no posee permisos de partición desde twrp, si en una actualización futura lo corrigen lanzare una actualización
English
Hello everyone, I bring you this little mod to eliminate trash apps from the stock rom
Removed:
System / System / app
Drive
DTVPlayer
Duo
Gmail
GooglePinyinIME
JapaneseIME
KoreanIME
Play Music
talkback
Videos
Youtube
ZhuyinIME
System / System / priv-app
DemoMode
DTVService
EasyPrefix
GuideMe
Step 1
Download TWRP ejecutable
Download Debloated Your Os
Step 2
Copy "Debloated Your Os" in your internal or external memory
Step 3
Turn off your device and put it in FastBoot mode (vol- + off)
Connect it to your pc
Step 4
Run the "TWRP Executable" tool
Step 5
Flash "Debloated Your Os"
Oem apps I have not yet managed to delete them because in the stock rom does not have partition permissions from twrp, if in a future update they correct it I will launch an update
fix Logo + flash
thanks to @erfanoabdi's for twrp
Seeing as you use @erfanoabdi's TWRP you should give him credit for that.
I highly question the decision to remove YouTube and Gmail but to each their own.
I miss a warning that the sd card could have problems, I tried to open it on my mobile but it did not respond, so I did it from the pc. It turns out that there is a photo that is damaged, when trying to delete it I get the error 0x80070570, so I tried to format the drive. I did it from the format button when you give the options with the mouse, and I tried it from the device manager, without slow formatting, in both file systems (NTFS / extFAT) and neither worked, when I finished formatting it opened the drive and nothing had been erased. When I selected all the files and deleted them manually, only the photo remained there. Then I resorted to a CMD. First with the DEL command, I get the same error, so I use CHKDSK and I skip the following error: Chkdsk E: / f The file system type is exFAT. The volume serial number is 0C22-CA71 Windows is checking files and folders ... Corruption was found while browsing the files in the \ DCIM \ Camera \ directory (5086). Corruption was found while examining files and directories. Corruption was found when examining the volume bitmap. Failed to recover lost files. I tried to search for info on the internet but nothing appeared, so I hope someone here can help me tot
If it's a downloaded image you may have an infected jpeg.
Nasty critters.
Normally their mischief is confined to the folder they're in but that's only from what I've experienced. They can execute global changes on PC based platforms. I haven't seen that in Androids... that's not to say they can't. If it's a new one it may not be detectable by virus scans as no definition may exist but it's actions give it away.
If so low level format the SD card. If it's an infected jpeg delete it at all costs. I hope you were using redundant backup... and don't let those SD files near the backups
Formatting the SD-card should work with
SD Memory Card Formatter for Windows Download | SD Association
www.sdcard.org
blackhawk said:
Si se trata de una imagen descargada, es posible que tenga un archivo jpeg infectado.
Bichos desagradables.
Normalmente, sus travesuras se limitan a la carpeta en la que están, pero eso es solo por lo que he experimentado. Pueden ejecutar cambios globales en plataformas basadas en PC. No he visto eso en Androides ... eso no quiere decir que no puedan. Si es uno nuevo, es posible que no sea detectable mediante análisis de virus, ya que puede que no exista una definición, pero sus acciones lo delatan.
Si es así, formatee la tarjeta SD de bajo nivel. Si es un jpeg infectado, elimínelo a toda costa. Espero que estuvieras usando una copia de seguridad redundante ... y no permitas que esos archivos SD se acerquen a las copias de seguridad
Click to expand...
Click to collapse
No es un jpg descargado, es una foto. El teléfono me advirtió que la sd estaba llena y podría tener problemas pero no me importa, y aparentemente es el archivo el que está causando problemas. El formateo limpio no funciona. Intente formatearlo de varias maneras, pero recuperará todos sus archivos cuando lo abra.
MOD EDIT: Please post only in English according to the FORUM RULES or at least add an English translation below your foreign language(Google translator for example),translation added below:
It is not a downloaded jpg, it is a photo. The phone warned me that the sd was full and might have problems but I don't care, and apparently it is the file that is causing problems. Clean formatting doesn't work. Try to format it in various ways, but it will get all your files back when you open it.
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)
!!! ATTENTION !!!
WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE!
AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE).
I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.
The following requirements must be met:
* Unlocked Bootloader;
* Device with charged battery;
* USB cable working and of good quality (preferably the original cable of the device);
* Remove all devices connected to the computer's USB port to avoid failures;
* Download "Original ROM":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Download "QPST Tool (QFIL + Drivers)" (Tool to install Qualcomm ROM and Drivers):
https://qpsttool.com/qpst-tool-v2-7-496
* Download "Platform Tools SDK" (Command Line Tool):
https://developer.android.com/studio/releases/platform-tools
* Package without "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_(TB-J716F).zip/file
Installation:
1. Extract the "Original ROM"
* Create a folder on the desktop called "ROM"
* Extract the "Original ROM" inside the "ROM" folder created;
2. Install the "QPST Tool (QFIL + Drivers)" and Qualcomm USB Drivers:
* Extract the "QPST Tool (QFIL + Drivers)" on the desktop,
* Install "QPST Tool.exe";
* Enter the "Driver" folder and install Qualcomm USB Drivers.
3. Enable Tablet USB Debugging "USB Debugging":
* Open the device's "Settings" settings;
* Go to My Device "My Device" and tap "ZUI Version" several times until enable "Developer Options" developer setting;
* Go back to Settings "Settings" and go to General Settings "General Settings";
* Select the Developer Settings "Developer Options";
* Check the USB Debugging box "USB Debugging";
4. Start the Tablet in EDL Mode (Emergency Download Mode):
In EDL Mode the device screen remains off!
There are two ways to put the Tablet into EDL mode "Emergency Mode" (Choose only one "Mode")
Mode1 (For Tablet powered off or unable to start)
* Turn off the Tablet;
* Press and hold the Volume Up (+) button;
* Connect USB cable to Tablet and computer.
Mode2 (By Command Line using "Platform Tools SDK")
* Turn on and start the Tablet;
* Connect USB cable to Tablet and computer.
* Extract the "Platform Tools SDK" on the desktop;
* Open the computer's CMD and navigate to the extracted folder (platform-tools);
* Use the adb command "adb reboot edl";
* Wait for the device to restart in EDL mode.
5. This should now appear in the Windows device manager:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Configuration of the "QPST Tool (QFIL)":
* Start QFIL;
* The device port must be automatically recognized by QFIL (make sure the port is correct);
* Make the settings shown in the screenshot;
“Configuration” -> “FireHose Configuration” and set ufs in “device type” and click “Reset After Download” and press OK;
* In the main window of QFIL in "Select Programmer", press the button "Browse" (If the button is not accessible, continue the guide that when choosing "content.xml" QFIL will automatically choose the file "prog_firehose_ddr.elf")
Navigate to the "ROM" folder on the desktop, select the "prog_firehose_ddr.elf" file;
* In the QFIL main window under "Select Meta Build" and "Content XML", press the "Load Content" button;
Navigate to the "ROM" folder on the desktop, and select the "contents.xml" file
* Now click on Download Content "Download Content" and wait;
* The process takes about 2-5 minutes and your tablet will restart with "Original ROM".
7. Blocking the "Bootloader" (OPTIONAL)
Bootloader blocking is optional!
After Bootloader lock your Tablet will receive OTA and Widevine L1 updates for high resolution media!
The following requirements must be met:
* Enable USB Debugging "USB Debugging" in the "Developer Options" developer options (see step 3. of this guide);
* Download and install Lenovo USB drivers (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this tool (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
7.1
* Start your tablet normally on Android and connect to PC by USB cable;
* Extract the "LockUnlockBootloader.zip" file on the desktop;
* Enter the extracted "LockUnlockBootloader" folder and open the "LockBootloader.bat" batch file;
* On the CMD screen, press “Enter” and then “1” and confirm again.
* On your Tablet will ask if you want to lock the bootloader;
* Select with the “Volume Up(+) / Down(-) Buttons” and confirm with the “Power Button(Power)”.
Okay, your bootloader is now locked.
7.2 Bootloader Locking Problems
Only for those who are getting "Your device is corrupted" message.
To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again.
Follow the tutorial again with the "Original ROM" and follow these steps:
The process for updating manually is the following:
All updates must be installed in order from smallest to largest and all must be renamed to "update.zip"
1) Download the update;
2) Use a file explorer and move it to the root of your device;
3) Rename it to "update.zip"
4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'
Repeat these steps for each individual update
The order of updates are:
1) Stock ROM version (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst
2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs
4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/
5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/
So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in Settings => My Device
Once you have done that you will have the Bootloader locked.
*Note this procedure works as of 25/5/22, it may change if there's a new update.
Credits to our friend "Rail-"
8. Unlock the "Bootloader" (OPTIONAL)
Bootloader unlocking is optional!
Only unlock if you intend to install "Custom ROM" or "ROOT" the device.
Before downgrading, make sure your current ROM is compatible!
The following requirements must be met:
* Enable USB Debugging "USB Debugging" and OEM Unlocking "OEM Unlocking" in developer options "Developer Options" (see step 3. of this guide);
* Download and install Lenovo "LenovoUsbDriver" USB drivers:
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this "LockUnlockBootloader" tool:
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Request "Bootloader" Unlock Image (sn.img) on Lenovo website:
https://www.zui.com/iunlock
It is necessary to inform the device's Serial Number and a valid Email to receive the file. The Serial Number can be obtained on the device box, on the label on the back of the device and on Android in Settings "Settings" -> My Device "My Device" -> Status "Status" -> Serial Number "Serial Number";
8.1
* Now you place the file directly in the “LockUnlockBootloader” program folder;
* Start the process with the batch file “UnlockBootloader.bat”;
* Done, now your bootloader is unlocked and you can install custom ROMs on your Xiaoxin Pad Pro 2021 (TB-J716F).
Source and Links used for this guide.
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)
Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!
www.chinahandys.net
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
THANK YOU SO MUCH TO THE COLLABORATORS!
******************************************************************************************
******************************************************************************************
VERSÃO ORIGINAL DO GUIA EM PORTUGUÊS (BR)
******************************************************************************************
******************************************************************************************
Instale uma ROM original Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)
!!! ATENÇÂO!!!
COM O GUIA VOCÊ PERDERÁ TODOS OS DADOS DO SEU APARELHO!
APÓS A INSTALAÇÃO, O APARELHO VAI POSSUIR SOMENTE O IDIOMA (INGLÊS E CHINÊS).
NÃO SOU RESPONSÁVEL POR QUALQUER DANO CAUSADO NO APARELHO, USE POR SUA CONTA E RISCO.
Os seguintes requisitos devem ser atendidos:
* Bootloader Desbloqueado;
* Aparelho com bateria carregada;
* Cabo USB funcionando e de boa qualidade (de preferência o cabo original do aparelho);
* Retire todos os aparelhos conectados na porta USB do computador para evitar falhas;
* Baixe "ROM Original":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Baixe o "QPST Tool (QFIL + Drivers)" (Ferramenta para instalar a ROM e Drivers da Qualcomm):
https://qpsttool.com/qpst-tool-v2-7-496
* Baixe o "SDK Plataform Tools" (Ferramenta para linha de comando):
https://developer.android.com/studio/releases/platform-tools
* Pacote sem "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_%28TB-J716F%29.zip/file
Instalação:
1. Extraia a "ROM Original"
* Crie uma pasta na área de trabalho chamada "ROM"
* Extraia a "ROM Original" dentro da pasta "ROM" criada;
2. Instalando o "QPST Tool (QFIL + Drivers)" e os Drivers USB da Qualcomm:
* Extraia o "QPST Tool (QFIL + Drivers)" na área de trabalho,
* Instale o "QPST Tool.exe";
* Entre na pasta "Driver" e faça a instalação dos Drivers USB da Qualcomm.
3. Ative a Depuração USB "USB Debugging" do Tablet:
* Abra as configurações "Settings" do aparelho;
* Vá para o Meu Dispositivo "My Device" e toque na "ZUI Version" várias vezes até abilitar a configuração de desenvolvedor "Developer Options";
* Volte para Configurações "Settings" e vá para Configurações Gerais "General Settings";
* Selecione a Cofiguração de Desenvolvedor "Developer Options";
* Marque a caixa de Depuração USB "USB Debugging";
4. Iniciar o Tablet no Modo EDL (Modo de Download de Emergência):
No Modo EDL a tela do aparelho permanece desligada!
Existe duas maneiras de colocar o Tablet no modo EDL "Modo de Emergência" (Escolha apenas um "Modo")
Modo1 (Para Tablet desligado ou que não puder ser iniciado)
* Desligue o Tablet;
* Pressione e segure o botão Volume Cima (+);
* Conecte o cabo USB no Tablet e no computador.
Modo2 (Por Linha de Comando utilizando o "SDK Plataform Tools")
* Ligue e inicie o Tablet;
* Conecte o cabo USB no Tablet e no computador.
* Extraia o "SDK Plataform Tools" na área de trabalho;
* Abra o CMD do computador e navegue até a pasta extraida (platform-tools);
* Use o comando adb "adb reboot edl";
* Espere o aparelho reiniciar no modo EDL.
5. Agora isso deve aparecer no gerenciador de dispositivos do Windows:
6. Configuração do "QPST Tool (QFIL)":
* Inicie o QFIL;
* A porta do aparelho deve ser reconhecida automaticamente pelo QFIL (certifique-se que a porta está correta);
* Faça as configurações mostradas na captura de tela;
“Configuration” -> “FireHose Configuration” e defina ufs em “device type” e clique em “Reset After Download” e aperte OK;
* Na janela principal do QFIL em "Select Programmer", aperte o botão "Browse" (Se o botão não estiver acessível, continue o guia que ao escolher o "content.xml" o QFIL escolherá automaticamente o arquivo "prog_firehose_ddr.elf");
Navegue até a pasta "ROM" no desktop, selecione o arquivo "prog_firehose_ddr.elf";
* Na janela principal do QFIL em "Select Meta Build" e "Content XML", aperte o botão "Load Content";
Navegue até a pasta "ROM" no desktop, e selecione o arquivo "contents.xml"
* Agora clique em Baixar Conteúdo "Download Content" e aguarde;
* O processo leva cerca de 2 a 5 minutos e seu tablet será reiniciado com a "ROM Original".
7. Bloqueio do "Bootloader" (OPCIONAL)
O bloqueio do Bootloader é opcional!
Após o bloqueio do Bootloader seu Tablet receberá atualizações OTA e Widevine L1 para medias de alta resolução!
Os seguintes requisitos devem ser atendidos:
* Ative a Depuração USB "USB Debugging" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
7.1
* Inicie seu tablet normalmente no Android e conecte ao PC pelo cabo USB;
* Extraia o arquivo "LockUnlockBootloader.zip" na área de trabalho;
* Entre na pasta "LockUnlockBootloader" extraida e abra o arquivo de lote "LockBootloader.bat";
* Na tela do CMD aperte “Enter” e depois “1” e confirme novamente.
* No seu Tablet vai perguntar se você deseja bloquear o bootloader;
* Selecione com os “Botões Aumentar(+) / Diminuir Volume(-)” e confirme com o “Botão Liga/Desliga(Power)”.
Pronto, seu bootloader já está bloqueado.
7.2 Problemas de bloqueio do "BootLoader"
Apenas para aqueles que estão recebendo a mensagem "Seu dispositivo está corrompido"
Para resolver isso, você deve atualizar manualmente para a versão mais recente do ZUI 13 antes de bloquear o bootloader novamente.
Siga o tutorial novamente com a "ROM Original" e siga estes passos:
O processo de atualização manual é o seguinte:
Todas as atualizações devem ser instaladas na ordem do menor para o maior e todas devem ser renomeadas para "update.zip"
1) Baixe a atualização;
2) Use um explorador de arquivos e mova-o para a raiz do seu aparelho;
3) Renomeie para "update.zip"
4) Acesse Configurações "Settings" => Atualização do Sistema "System Update" => "Selecione os 3 pontos no canto superior direito e escolha o arquivo"
Repita essas etapas para cada atualização individual
A ordem das atualizações é:
1) ROM Original versão (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst
2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs
4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/
5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/
Portanto, a versão que você precisa estar executando antes de tentar bloquear o bootloader é 13.1.555, então verifique sua versão nas configurações "Settings" => Meu Dispoditivo "My Device"
Feito isso, você terá o Bootloader bloqueado.
*Observe que este procedimento funciona a partir de 25/5/22, pode ser alterado se houver uma nova atualização.
Créditos ao nosso amigo "Rail-"
8. Desbloquear o "Bootloader" (OPCIONAL)
O desbloqueio do Bootloader é opcional!
Só faça o desbloqueio se você pretende instalar "Custom ROM" ou fazer "ROOT" no aparelho.
Antes de realizar um downgrade, tenha certeza que sua ROM atual é compativel !
Os seguintes requisitos devem ser atendidos:
* Ative a Depuração USB "USB Debugging" e o Desbloqueio OEM "OEM Unlocking" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo"LenovoUsbDriver":
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta "LockUnlockBootloader":
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Solicite a Imagem de Desbloqueio do "Bootloader" (sn.img) no site da Lenovo:
https://www.zui.com/iunlock
É necessário informar o Número de Série do aparelho e um Email válido para receber o arquivo. O Número de Série pode ser obtido na caixa do aparelho, na etiqueta atrás do aparelho e no Android nas Configurações "Settings" -> Meu Dispositivo "My Device" -> Status "Status" -> Número de Série "Serial Number";
8.1
* Agora você coloca o arquivo diretamente na pasta do programa “LockUnlockBootloader”;
* Inicie o processo com o arquivo de lote “UnlockBootloader.bat”;
* Pronto, agora seu bootloader está desbloqueado e você pode instalar ROMs personalizadas no seu Xiaoxin Pad Pro 2021 (TB-J716F).
Fonte e Links utilizados para esse guia.
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)
Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!
www.chinahandys.net
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
MUITO OBRIGADO AOS COLABORADORES!
Edit: I decided to do it anyway, but after QFIL flash is done, I got this “Your device is corrupt…” message.
Did you follow this guide??
Explain to me better how you performed the process and the conditions your device was in... like:
-Bootloader was unlocked?
-Which ROM was the device?
-Did you do any Updates with the Bootloader unlocked?
Try to force EDL mode (part 4. Mode1 of this guide) and redo the guide !
I made this tutorial based on 3 topics, and for me it worked well
Oh no I forgot to unlock bootloader, I never unlocked it, just want to reinstall original rom to get L1 back. So now it’s bricked?
Is there any way to unlock bootloader at this stage?
duonglv said:
Is there any way to unlock bootloader at this stage?
Click to expand...
Click to collapse
Hi
At the end of this guide talks about locking and unlocking Bootloader, see if it works for you
Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)
Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!
www.chinahandys.net
Awesome compilation.
I followed the steps and get all OTA and widevine L1.
Thank you very much.
duonglv said:
Is there any way to unlock bootloader at this stage?
Click to expand...
Click to collapse
Hi #duonglv
I faced the same problem when I was trying to lock the bootloader. The reason was that I thought the USB driver installed on step 2 was the same required on step 7 but they are not. On step 2 we need to install QUALCOMM USB driver and on step 7 it is LENOVO USB driver. After I installed the LENOVO USB driver I could get the same screen showed by #CleberJorge asking if we would like to lock the bootloader. I hope this tip works for you.
Thanks man for this detailed guideline. It worked fantastically well!
Muito obrigado Jorge. São pessoas como vc que nos faz não perder a esperança na sociedade. O uso correto de uma rede social. Resolver problemas através do compartilhamento de conhecimento.
hi guys
I followed instructions to flash the original rom
worked and booted
however, i missed the step on locking the bootloader after updating to 13.1.555 (i tried locking it after flashing original rom)
the device rebooted, informed me that it's corrupt and won't boot, then proceed to go into recovery mode/fastboot
my device will only boot to fastboot now
flashing original rom doesn't work
it also says device state - locked
can someone guide me?
thanks!
blanket said:
hi guys
I followed instructions to flash the original rom
worked and booted
however, i missed the step on locking the bootloader after updating to 13.1.555 (i tried locking it after flashing original rom)
the device rebooted, informed me that it's corrupt and won't boot, then proceed to go into recovery mode/fastboot
my device will only boot to fastboot now
flashing original rom doesn't work
it also says device state - locked
can someone guide me?
thanks!
Click to expand...
Click to collapse
You have lock the bootloader without getting the latest ROM.
All you have to do is to follow the guides again from start. unlocked the bootloader and flash the original ROM.
After this, follow the guide above for the 7.2 Bootloader Locking Problems
localbus said:
You have lock the bootloader without getting the latest ROM.
All you have to do is to follow the guides again from start. unlocked the bootloader and flash the original ROM.
After this, follow the guide above for the 7.2 Bootloader Locking Problems
Click to expand...
Click to collapse
Yup you’re right on the cause
I tried flashing back the original rom but it didn’t fix it
However, an hour back, I tried unlocking my bootloader with sn.img and reflashed the original rom
My device works now. Thanks!
i also have the device is corrupt issue and am only able to access fastboot. When i have tried to unlock my bootloader with sn.img it says the serial number is not matched. My serial number on the fastboot screen is different to the one on the back of the device. I also tried getting a sn.img of serial number on the fastboot screen and it is not recognised as valid on zui iunlock. Is there any fix for this or am I screwed?
Blokester said:
i also have the device is corrupt issue and am only able to access fastboot. When i have tried to unlock my bootloader with sn.img it says the serial number is not matched. My serial number on the fastboot screen is different to the one on the back of the device. I also tried getting a sn.img of serial number on the fastboot screen and it is not recognised as valid on zui iunlock. Is there any fix for this or am I screwed?
Click to expand...
Click to collapse
It sounds like your fpinfo partition got deleted. Try the guide here https://forum.xda-developers.com/t/...f-p11-pro-xiaoxin-2021.4448469/#post-86923725
Spoiler: Portuguese
@CleberJorge amigo, vc tem esse update em algum outro server ?
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
pelo mega não estou conseguindo finalizar o download.
If someone have this update on another server, please let me know.
**Mod Edit: English translation provided**
friend, do you have this update on any other server?
2.77 GB file on MEGA
mega.nz
by mega I am not able to finish the download.
If someone has this update on another server, please let me know.
JobinFerreira said:
@CleberJorge amigo, vc tem esse update em algum outro server ?
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
pelo mega não estou conseguindo finalizar o download.
If someone have this update on another server, please let me know.
Click to expand...
Click to collapse
I attached the link for 2 qpst stock firmware:-
1) from zui 12
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
drive.google.com
2) from zui 13
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_qpst.rar
drive.google.com
goodluck and happy try
gunalarix8 said:
I attached the link for 2 qpst stock firmware:-
1) from zui 12
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
drive.google.com
2) from zui 13
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_qpst.rar
drive.google.com
goodluck and happy try
Click to expand...
Click to collapse
Thanks, but I think you sent me different ones, I nedd the update:
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
Do you have the link ?
Edit: solved.
JobinFerreira said:
@CleberJorge friend, do you have this update on any other server?
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
pelo mega não estou conseguindo finalizar o download.
If someone have this update on another server, please let me know.
Click to expand...
Click to collapse
Spoiler: Portuguese
Bom dia!
Eu não tenho outros links, na verdade esse link é compartilhado entre o pessoal do forum.
Faz o seguinte se for por causa do limite de download do mega:
Baixe um gerenciador de download (Jdownloader por exemplo) e espere o tempo necessario para continuar o download.
flw
**Mod edit: Translation provided**
Good Morning! I don't have any other links, in fact this link is shared among the forum staff. Do the following if it is because of the mega download limit: Download a download manager (Jdownloader for example) and wait the necessary time to continue the download. bye
Spoiler: Portuguese
Alguém consegue me ajudar a desbloquear o bootloader? O tablet não liga. Eu conectei-o no computador, baixei o aplicativo e a sn.img, mas ao abrir o cmd do aplicativo ele fica "searching for device", mesmo eu ligando o tablet (que só fica no modo de fastboot) ou segurando o volume +
**Mod edit: Translation provided**
Can anyone help me to unlock the bootloader? The tablet does not turn on. I connected it to the computer, downloaded the application and the sn.img, but when I open the application's cmd it says "searching for device", even if I turn on the tablet (which is only in fastboot mode) or hold down the volume
GeraldoNeto3 said:
Spoiler: Portuguese
Alguém consegue me ajudar a desbloquear o bootloader? O tablet não liga. Eu conectei-o no computador, baixei o aplicativo e a sn.img, mas ao abrir o cmd do aplicativo ele fica "searching for device", mesmo eu ligando o tablet (que só fica no modo de fastboot) ou segurando o volume +
**Mod edit: Translation provided**
Can anyone help me to unlock the bootloader? The tablet does not turn on. I connected it to the computer, downloaded the application and the sn.img, but when I open the application's cmd it says "searching for device", even if I turn on the tablet (which is only in fastboot mode) or hold down the volume
Click to expand...
Click to collapse
im sorry, i dont know i cant write in portuguese, my bad