Related
Hello,
I wasn't able to post a response in the Development forums yet, so please move this thread if you see fit and sorry as I'm still new to posting here.
------------------------------------------------------------------
I am using the original full leaked version of the ROM.
If you are having issues using ODIN to flash Dr. Honk's amazing new kernel: [http://forum.xda-developers.com/showthread.php?t=1194032] Or if you are having issues with not seeing your SD card after successfully flashing the kernel try the steps below:
If your having issues with ODIN, get Winrar and extract the zimage from the tar file and use heimdall and it should flash correctly. After you flash the kernel and boot up, you may notice your not seeing your SD card. Try going to recovery which you can now! Wipe your data<factory> then your Cache, then wipe your Dalvik Cache and use fix permissions. Reboot and you should now see your SD card, only catch to this kernel is Dr. Honk's forgot to add busybox, so I would go to the market and get it then you can also use Voodoo lag fix.
It's working great for me! Good Job Dr. Honk!
You would likely get a little more assistance if you would give more info (what room you're currently using; where you're stuck).
honestly, if you're having issues with this install you would probably do better to wait.
Sent from my SGH-T959V using XDA Premium App
I'm Sorry, Did I not clarify my post? I'm not having issues, was trying to help others who are in a forum I cannot yet post in and for others who might have the same issues that may look to the General Forum. Sorry if I wasn't clear enough.
I don't think he has any issues.. he's posting a tutorial for others
Sent from my SGH-T959V using XDA App
bytesfree said:
I'm Sorry, Did I not clarify my post? I'm not having issues, was trying to help others who are in a forum I cannot yet post in and for others who might have the same issues that may look to the General Forum. Sorry if I wasn't clear enough.
Click to expand...
Click to collapse
My apologies... I miss read.
Sent from my SGH-T959V using XDA Premium App
LoL, no problem man...I just figured it would be good to give back to this great community with some helpfull info for once
thanks for the tip!
dont know if this helps or not but this is how i got mine working:
i flashed kg4 leak then did dsextons gb rom root,
then i installed busy box and installed on phone,
then flashed drhonks new kernal for kg4 (his new download works)
now everything works great in=m on ext 4 system cache and data and also have cwm recovery support
Thanks for the tips.
I tried all above, the SD shows right, but I still cannot have lagfix properly work and convert EXT4. Everytime system restart, it reports not enough space on SD card, but actually I have 14 GB available on my SD.
I did my flash exactly like jdubb. it worked flawlessly. Thanks drhonk for everything you do for us
Sent from my SGH-T959V using XDA Premium App
did you install busybox before you flashed the kernel?
jdubb1106 said:
did you install busybox before you flashed the kernel?
Click to expand...
Click to collapse
Yes, I did. I checked the log, it shows the /sdcard avaialbe space is negtive like "-1353 MB". Really strange.
hunterwei said:
Yes, I did. I checked the log, it shows the /sdcard avaialbe space is negtive like "-1353 MB". Really strange.
Click to expand...
Click to collapse
Hunter, can you try this:
pop in an other micro sd, boot into CWM, format sd, enable voodoo ext4 and reboot.
if you don't have a spare one, backup files from the current sd card then proceed as above.
Can someone post the precise links and directions that they used to get this working, please! Much appreciated!
Bro, I really appreciate your quick tip, but I tried it, the issue remains.
Having been searched XDA whole afternoon, still have no idea
ddang25377 said:
Hunter, can you try this:
pop in an other micro sd, boot into CWM, format sd, enable voodoo ext4 and reboot.
if you don't have a spare one, backup files from the current sd card then proceed as above.
Click to expand...
Click to collapse
I was reviewing the source code of voodoo lagfix, just feel like the my sdcard available space is not properly read from lagfix code.
Not sure if you guys still using the factory SD card, I am using the 16GB one came with the phone.
Issues with SD card.
For those of you with issues on their SD card, did you by chance try enabling lagfix via Voodoo Control app? That is what I had to do to get lagfix working properly. I disabled it via recovery and then enabled it via control app. Somehow got it working that way lol.
Unable to answer inbound calls
The install went flawless and phone works great. I do have a major issue though, inbound calls are cause a force close and create an instand missed call. Is anyone else having issues being able to answer inbound calls? I can make calls just fine, it just refuses to let me answer a call.
I am currently running:
2.3.4 KG 6 with the 2.6.35.7 Kernal.
This worked great for me on kg4, but for some reason i flash this on kg6 and after the flash boots up fine. But whenever i restart my phone i get a boot loop at the samsung screen. So confused Any ideas?
kkoshko1 said:
This worked great for me on kg4, but for some reason i flash this on kg6 and after the flash boots up fine. But whenever i restart my phone i get a boot loop at the samsung screen. So confused Any ideas?
Click to expand...
Click to collapse
I was getting the same thing when I turned on Voodoo so I went back to recovery to disable Voodoo (I had to use ADB since the phone wasn't functional long enough to use the Quickboot app).
Then (per crackpot in a dev thread (http://forum.xda-developers.com/showpost.php?p=16264528&postcount=222) booted back up and used the Busybox Installer from stericson to make sure Busybox was installed into bin and not xbin.
Then back to recovery and enable Voodoo.
Hi,
I checked through many threads to see if anyone had a similar problem but couldn't find anything unfortunately.
Background :
I was running a Lite'ning ROM on my Samsung Galaxy S2. You're probably familiar with this ROM, but for those who aren't it gets flashed with ODIN and comes rooted and pre-installed with CWM.
I forget which version of Lite'ning ROM it was, but I am fairly certain it was pre-1.5 as the bundled CWM was definitely version 3.x.x.x (later versions I found had 4.x.x.x and 5.x.x.x).
I wanted to try a version of GalnetMIUI for something a bit different and hadn't changed ROMs in quite some time, so I booted into CWM 3.x.x.x (maybe 3.0.0.2?) and did a backup to the internal SD. This came in at around 1.4 GB and comprised of 4 files :
cache.img
data.img
nandroid.md5
system.img
I copied these to my PC too, just in case they somehow got erased from my phone.
Once I'd done this, I then copied the new ROM .zip file (latest version of GalnetMIUI) to the root of the internal SD, booted the phone into CWM, wiped user data and Dalvik cache, then proceeded to install it.
The problem :
I can't get my apps or data back. I was under the false impression that my Google account was automatically backing this up for me, and would restore everything once logged in as it had in the past (factory resets etc.). So once this didn't happen, I tried using CWM to revert back to how things were before installing the new ROM but although the restore appears to work I end up with issues.
I've tried a number of different ROMs and they either get stuck in 'boot loops' or a black screen after running through the restore procedure. I've tried restoring just data via the 'Advanced' option but this doesn't help.
I was under the impression that I'd be able to fully restore the ROM backup if I needed to, and have the phone running exactly how it was prior to messing around. It would seem this is not the case.
In desperation I tried flashing every Lite'ning ROM from version 1.0 to 4.2, restoring my backup each time but as mentioned I always get boot issues.
Have I lost my data? I hope not, as I had 'To Do' lists and all sorts of things that would cause problems if they were not retrievable. I realise this is a lack of knowledge and foresight on my part. I'm thinking now that I should have run Titanium Backup prior to this, and not assumed that CWM was going to provide a complete solution.
Hope all this makes sense and if any of you have the time to read through and offer advice it would be greatly appreciated. I am currently running a very pretty and slick GalnetMIUI without any of my data!
Thanks in advance.
download cwm 2.5.x.x its better
[email protected] said:
download cwm 2.5.x.x its better
Click to expand...
Click to collapse
Thanks for that, I'll give it a go tonight after work. Am I right in thinking that if it doesn't work I can extract the individual files and insert them manually to get my app data back?
OK, so after hours of searching I'm still no wiser as to how to install CWM 2.5.1.2
I found a zip file that was apparently version 2.5.1.2 but when I tried to install it from inside CWM 5.0.2.6 (included with GalnetMIUI) it sometimes gives an error, sometimes it reboots CWM and sometimes it simply says it has successfully installed (it lies). No matter what it says or does, it doesn't seem to actually replace version 5.0.2.6 with the older one and every time I do the three-finger boot it loads up the latest version like nothing changed.
I'm just so lost. All I want to do is restore my old backup, get my data back and move on. Please someone help me before I go insane from all this research!
[EDIT] In case any more information is needed, my exact procedure for installing version 2.5.1.2 of CWM went like this :
Download 2.5.1.2 zip file
Copy zip file to root folder on internal SD
Boot into CWM 5.0.2.6
Select "install zip from sdcard"
Select "choose zip from sdcard"
Navigate to 2.5.1.2 zip file, select and confirm
Can anyone help me at all?
In particular I'd like to know how I can downgrade to CWM 2.5.1.2 or similar in order to give [email protected]'s suggestion a go.
Failing that, if anyone has any suggestions whatsoever about how I can get my backup data restored it would be greatly appreciated. After spending some time with MIUI - in particular the Galnet ICS build - I have nothing but praise, but I really have to get my data back!
You should be able to downgrade through ROM manager. Go to "All Clockwork Mod Recoveries" and just flash one that is not 5.x.x. Any backup not made with version 5 will not work with the new version So if you can flash one that is version 2, 3 or 4 you should be good to go. If that doesn't work you can fastboot flash it. There are guides on how to do that.
Wait.....did you mount /system before installing the CWM zip ?
Sent from my GT-S5830 using XDA App
Sorry for the delayed reply, for some reason I didn't get an email notification that my thread had been updated.
lowandbehold said:
You should be able to downgrade through ROM manager. Go to "All Clockwork Mod Recoveries" and just flash one that is not 5.x.x. Any backup not made with version 5 will not work with the new version So if you can flash one that is version 2, 3 or 4 you should be good to go. If that doesn't work you can fastboot flash it. There are guides on how to do that.
Click to expand...
Click to collapse
For some reason, when I select "All ClockworkMod Recoveries" the only two options are 4.0.1.4 and v4.0.1.4. I'll have to look into "fastboot" flashing as I've never heard of that.
By the way, if I boot into CWM via ROM Manager the version that loads is 4.0.1.5, but if I perform the three-button combo when switching my device on I get version 5.0.2.6.
EmoBoiix3 said:
Wait.....did you mount /system before installing the CWM zip ?
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I didn't, is that something I should try?
Edit - Just tried this and at first it rebooted CWM and the version number hadn't changed. Doing this again yielded me the following error with no change in version number :
Code:
E:Error in /sdcard/CM V 2.5.1.2_update.zip
(Status 0)
Installation aborted.
I found out that I can extract the contents of my backed up .img files using unyaffs.exe.
Unless I'm doing something wrong, it would appear that my backup is corrupt somehow. When trying to extract data.img, it processes for a while and does bring back a lot of files but I also get the following :
Code:
read image file
: Bad file descriptor
read image file
: Bad file descriptor
data.img is around 1.2GB but the files I extract only amount to around 190MB.
It would appear that I don't have my contacts database in there which is annoying as for some reason there were quite a few that didn't get synced to Google's servers.
This is a general CWM question but I could not find any place better to post on XDA, so excuse this if incorrect location.
I have flashed all the Skyrocket ICS roms in the past few days to see which I liked best. Before I flashed a new one, I would make a CWM backup of the current one. Wanting to easily be able to identify the files, I appended the rom name to the end of the CWM filenames after deleting all the characters after the date, which appeared to be a GMT time stamp. Now, when I try to restore any of those files, I get an MD5 checksum error. I am only assuming that this is due to changing the filename and not some other problem. Anyone have any ideas on how to fix this? TIA.
phoneturf said:
This is a general CWM question but I could not find any place better to post on XDA, so excuse this if incorrect location.
I have flashed all the Skyrocket ICS roms in the past few days to see which I liked best. Before I flashed a new one, I would make a CWM backup of the current one. Wanting to easily be able to identify the files, I appended the rom name to the end of the CWM filenames after deleting all the characters after the date, which appeared to be a GMT time stamp. Now, when I try to restore any of those files, I get an MD5 checksum error. I am only assuming that this is due to changing the filename and not some other problem. Anyone have any ideas on how to fix this? TIA.
Click to expand...
Click to collapse
Are you talking about the folder name? Because that shouldnt affect it. Inside the folder that is created for each backup, there are backup files which dont have any dates/times in the filename itself.
I vaguely remember reading about this, but I can't recall how it was resolved. Try updating your can to 5.5.0.4 Touch or 5.8.1.3 (?? something along those lines) and seeing if that resolves it. Outside if that I must ask the obvious, did u Google "md5 checksum error cwm"?
Are you using the same CWM version as you did when you backed up? If you didnt, then thats one reason. You have to stay on the same CWM version, many of these CWM versions floating around have different fixes in there.
One way around this is to go to Advanced Restore and restore all the IMG files from there.
Dixit
ihtfp69 said:
I figured I would post this fix here in case anyone else ran into this problem. This is assuming you did not change the folder names and let Clockworkmod create them. I haven't had it happen until today, but it's not a nice message to see when you are trying to do a restore.
Code:
Checking MD5 sums...
MD5 mismatch!
Do this to fix:
To fix this problem use the code below. Substitute the final folder name for the backup you need to fix.
Code:
adb shell
# cd /sdcard/clockworkmod/backup/2010-06-29.20.22.53
# rm nandroid.md5
# md5sum *img > nandroid.md5
When that finishes, re-run the restore and everything should be fine.
NOTE: As rpearl stated, there could be something really wrong with your nandroid, so use this tutorial as a learning experience and not a fix-all. In my case, everything was fine after restoring. However, that may not always be the case. Do this with caution.
Click to expand...
Click to collapse
Use this method to potentially fix.
dixit said:
Are you using the same CWM version as you did when you backed up?
Dixit
Click to expand...
Click to collapse
That is correct on most of them. I updated to CWM Touch for the last one, but it did not restore either. To check this out, I just did a backup and without changing the name did a restore and it worked fine. The thing that was odd in the backups that would not restore was that it immediately bombed out of the checksum each time as if it was checking the name itself first.
That is brilliant. I did not realize you could generate the MD5 from ADB and stick it right into the folder. Thanks!
The few times this md5 mis-match has happened to me was because (a) the backup was actually messed up (check folder size) probably due to corruption or (b) my SD card was out of space. I've always renamed my backup set similar to yours (I append the ROM name) and it never affects the restore.
bdbx18 said:
The few times this md5 mis-match has happened to me was because (a) the backup was actually messed up (check folder size) probably due to corruption or (b) my SD card was out of space. I've always renamed my backup set similar to yours (I append the ROM name) and it never affects the restore.
Click to expand...
Click to collapse
Are you using touch or standard CWM? I wonder if this only happens in touch version. I will try this in the next few days.
I changed the name of one of the backups I created with CWM touch and it restored fine using touch. I suppose my earlier problem may have been trying to restore a backup created with old CWM using touch version.
well since you are on the subject cwm touch im making a nanadroid backup of my current ics rom right now as i speak. i started about an hour ago and its still on the backing up data part. when i used the older version to make backups i dont remember it taking this long. have any of you had cwm touch take well its been a little over an hour now? i do have more apps on my phone now than i did the last time i made a backup would that matter? should i just jerk the battery out and go back to the older version of cwm i was using? thanks ahead of time for any advice / help you may give i would appreciate it. im trying to backup this rom cause i want to flash a different modem cause the ics modem form the leak is crap and need a backup in case it dont work..
garydv2002 said:
well since you are on the subject cwm touch im making a nanadroid backup of my current ics rom right now as i speak. i started about an hour ago and its still on the backing up data part. when i used the older version to make backups i dont remember it taking this long. have any of you had cwm touch take well its been a little over an hour now? i do have more apps on my phone now than i did the last time i made a backup would that matter? should i just jerk the battery out and go back to the older version of cwm i was using? thanks ahead of time for any advice / help you may give i would appreciate it. im trying to backup this rom cause i want to flash a different modem cause the ics modem form the leak is crap and need a backup in case it dont work..
Click to expand...
Click to collapse
If you are using sk8erwitskil version of the CWM touch (ClockworkMod TOUCH 5.5.0.4 v3.5) then most likely you didnt follow one of the directions on the front page. This is a known issue. Here it is again. You need to create that file on the location you backing upto.
For CWM to recognize the .hidenandroidprogress file you need to boot into CWM and go to mounts and storage>>mount /sdcard then go back to backup & restore and make a restore and it should work everytime (as long as you do the steps in that order and you have the .hidenandroidprogress file in /sdcard/clockworkmod & /sdcard/external_sd/clockworkmod folders)
There is a known bug in ClockworkMod 5.5.0.4 that long file names can POSSIBLY cause backups to hang. There is a solution/workaround:
•boot into recovery
•try to make a backup (no matter if it passes or fails proceed to next step)
•either through terminal emulator or through adb run the following command EXACTLY:
Code:
touch /sdcard/clockworkmod/.hidenandroidprogress
•if you are backing up to external sdcard then run the following:
Code:
touch /sdcard/external_sd/clockworkmod/.hidenandroidprogress
im using 5.8.1.3 hercules that i got from the dev section. is this a known issue with it to?
garydv2002 said:
im using 5.8.1.3 hercules that i got from the dev section. is this a known issue with it to?
Click to expand...
Click to collapse
Not sure, I used that for awhile but then went back to the other touch and Ive had those two files still in my directories.
I would go ahead and create those two files (one for internal SD and one for external SD if you got one you are using that is) and try it again. Make sure you call that file exactly the way it is, or copy/paste the code identically if you do it through ADB.
Dixit
garydv2002 said:
im using 5.8.1.3 hercules that i got from the dev section. is this a known issue with it to?
Click to expand...
Click to collapse
I use that one, takes less than 5 minutes on my class 10 sd.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Well the crazy thing is after sitting there over an hour waiting I finally took out the battery and even though it never said complete all the files are there but I still don't trust that it made a good backup so I deleted those files tried putting in the code above and it still would not work so I flashed back to version 5.0.2.0 thats not touch and it made a perfect backup in under 2 minutes. Might be one of those it just ain't gonna work right on this specific phone thing or it could be the little green gremlins at it again lol... who knows.. I'll just wait for new version of touch to come along and try it. It won't be long till a newer greater version comes along as fast as technology is going today.. thanks for the help. I'm learning more and more each day from you guys on xda.....
Sent from my SAMSUNG-SGH-I727 using XDA
Not sure if this is the cause of the issue but for nandroid backups you can't make a folder name with spaces otherwise you will get an md5 sum error. Try renaming the folder with underscores instead of spaces
I rooted my S3, changed one file, and am now stuck in the startup screen. I've looked on the forums but I'd like to confirm what my recovery options are.
(1) Since I have no backup*, can I recover from a factory recovery for my model and still keep some of my data, apps and customizations?
It's a N American SIII (Rogers Wireless Samsung SGH-I747M). I can boot successfully into both Odin and CWM Recovery (Clockwork 5.5). BusyBox installed. I do not have a functioning MicroSD.
*I only did one thing:
renamed framework-res.apk to framework-res.apk2 to test permissions. Errors and crash ensued, then I restarted and here I am.
That apk file is part of a fix which is circulating that corrects a bug in the North American models' battery reporting, which requires replacing the apk with a slightly modified version. I thought trying a file rename was a safe small test, prior to backing up. The name "framework" should have tipped me off probably.
(2) Is factory recovery my best option? I would love to get in and just name the file back. But I can't get in.
(3) Was some automatic backup made that I overlooked? Rooting and the learning curve took so many steps I can't remember myself.
(4) Can I just restore the /system directory perhaps?
Yep, relative noob here. Hope my question is placed correctly and I haven't missed another post with the answers I need, if not pls advise.
Copied question to a better thread
It's now in the Android Q&A, see:
http://forum.xda-developers.com/showthread.php?p=28256764
Just getting used to the forum here.
NEVER FEAR find a ROM that you want to install and flash it using Odin or copy it to SD card and flash using clockwork mod And no there is no secret backup BTW once you get your phone working again make a backup then Go to where its stored And label it ALWAYS backup as soon as you root your phone
If you can manage, push a similar framework (taken from someone else) using adb...
Typed using a small touchscreen
How?
jezus101 said:
NEVER FEAR find a ROM that you want to install and flash it using Odin or copy it to SD card and flash using clockwork mod And no there is no secret backup BTW once you get your phone working again make a backup then Go to where its stored And label it ALWAYS backup as soon as you root your phone
Click to expand...
Click to collapse
You can flash a ROM using Clockwork instead of Odin? I totally missed that memo! Tips please
I found that Clockwork required the file to be in the internal SD folder -- I couldn't access the External SD card under any circumstance. There was no way to get a file to the internal file system without a functioning ROM. This is still confusing me. Maybe I had the wrong version of Clockwork or was doing it wrong. Not for lack of trying.
After tinkering with the tablet and trying my best to restore it I finally was able last night to restore it to a clean install using this method. I'm sure there may be other ways to do it as well but this worked for me and was painless.
1. Make sure the tablet is rooted/unencrypted using Vampirefo's guide:
http://forum.xda-developers.com/android/development/root-nextbook-ares-8-twrp-recovery-t3133165
2. Make a backup of your System, Boot, etc. of your current boot-looped ROM with TWRP.
3. With TWRP's file manager, go into the internal storage and delete all the files within the backup folder.
4. Download this backup:
https://onedrive.live.com/?id=19085CD12562E567%21931&cid=19085CD12562E567&group=0&parId=19085CD12562E567%21925&authkey=%21AHmuVovnpuzX0tI&action=locate
5. Extract the files from the zip and copy them over to the backup folder on the internal storage.
6. Go to Restore on TWRP and dance.
After many attempts of trying to restore from an external SD card and from just creating my own TWRP backup folder, TWRP just wouldn't see the backup until I copied and replaced. I'm glad it worked and I hope it helps anyone else who needs a restore.
Credit goes to jmreyesiii for providing the backup files and vampirefo for the rooting.
PhantomOSX said:
After tinkering with the tablet and trying my best to restore it I finally was able last night to restore it to a clean install using this method. I'm sure there may be other ways to do it as well but this worked for me and was painless.
Credit goes to jmreyesiii for providing the backup files and vampirefo for the rooting.
Click to expand...
Click to collapse
An absolutely great post! You need a special thanks because this ability to recover from catastrophe likely will encourage others to move forward with more daring mods. I feel much more secure in playing with a few ideas knowing you have the base Rom and recovery spelled out and that it actually worked (Yes, I knew how, but knowing it worked for sure is huge!)
Thanks,
Freddy999
Now if only some kind hearted dev would release a ROM....
Actually, after you root and decrypt it, and fix the cpu governor and such, and get rid of the google apps that you don't use, with the exception of the lollipop HW overlay flaw it is not a bad ROM to start with. I wiped most of the Google stuff and put in Nova launcher. Now the device is quite manageable and very fast without much further help. Here is a pretty good summary of the device for anyone who has the tools to build a ROM: http://specdevice.com/showspec.php?id=ee2d-39de-0033-c5870033c587 with the exception I can not find that the FM radio exists in the device although the hardware seems to say it is there..........
what do you mean cpu governor?
adamx said:
what do you mean cpu governor?
Click to expand...
Click to collapse
Playstore: No frills CPU control
set it ondemand, noop
You might want to get also CPU spy reloaded to see the effect/
The backup file expired (or something) on OneDrive. Would you mind re-upping it somewhere? Thanks!
PhantomOSX said:
After tinkering with the tablet and trying my best to restore it I finally was able last night to restore it to a clean install using this method. I'm sure there may be other ways to do it as well but this worked for me and was painless.
1. Make sure the tablet is rooted/unencrypted using Vampirefo's guide:
http://forum.xda-developers.com/android/development/root-nextbook-ares-8-twrp-recovery-t3133165
2. Make a backup of your System, Boot, etc. of your current boot-looped ROM with TWRP.
3. With TWRP's file manager, go into the internal storage and delete all the files within the backup folder.
4. Download this backup:
https://onedrive.live.com/?id=19085CD12562E567%21931&cid=19085CD12562E567&group=0&parId=19085CD12562E567%21925&authkey=%21AHmuVovnpuzX0tI&action=locate
5. Extract the files from the zip and copy them over to the backup folder on the internal storage.
6. Go to Restore on TWRP and dance.
After many attempts of trying to restore from an external SD card and from just creating my own TWRP backup folder, TWRP just wouldn't see the backup until I copied and replaced. I'm glad it worked and I hope it helps anyone else who needs a restore.
Credit goes to jmreyesiii for providing the backup files and vampirefo for the rooting.
Click to expand...
Click to collapse
Yes the link to the backup is dead, can OP or anyone else upload another? I wiped the internal storage and now android has no home or back buttons so I cant get out of apps
Uploaded to MEGA https://mega.nz/#!1J4VwDxL!ZvRkBlvD7m-ldc5qQxA_xDWfUiu6WDdJa3nAMvDfhZY
stevemp said:
Uploaded to MEGA https://mega.nz/#!1J4VwDxL!ZvRkBlvD7m-ldc5qQxA_xDWfUiu6WDdJa3nAMvDfhZY
Click to expand...
Click to collapse
Thanks!
stevemp said:
Uploaded to MEGA https://mega.nz/#!1J4VwDxL!ZvRkBlvD7m-ldc5qQxA_xDWfUiu6WDdJa3nAMvDfhZY
Click to expand...
Click to collapse
Thanks Steve you're a true bro
THANK YOU!!!!!!!!!
I rooted and removed the encryption from my ARES 8 but then when messing with an (official) flashing tool I ended up formatting my system partition., So I had NO OS at all., But I did have TWRP., And now thanks to your post I have a living breathing working tablet again., By all your gods (or none at all if that's your thing) I Bless you! Thank you X Infinity! :good::good::good::good::good:
-Eric.
P.S. I got it to work from my SD card but I did have to make a backup with TWRP first, then pop the SD card into the PC delete all the files from the folder and copy your files into the folder that TWRP had created. Otherwise it didn't show up at all... Anyway Thanks again! :victory:
PhantomOSX said:
After tinkering with the tablet and trying my best to restore it I finally was able last night to restore it to a clean install using this method. I'm sure there may be other ways to do it as well but this worked for me and was painless.
1. Make sure the tablet is rooted/unencrypted using Vampirefo's guide:
http://forum.xda-developers.com/android/development/root-nextbook-ares-8-twrp-recovery-t3133165
2. Make a backup of your System, Boot, etc. of your current boot-looped ROM with TWRP.
3. With TWRP's file manager, go into the internal storage and delete all the files within the backup folder.
4. Download this backup:
https://onedrive.live.com/?id=19085CD12562E567%21931&cid=19085CD12562E567&group=0&parId=19085CD12562E567%21925&authkey=%21AHmuVovnpuzX0tI&action=locate
5. Extract the files from the zip and copy them over to the backup folder on the internal storage.
6. Go to Restore on TWRP and dance.
After many attempts of trying to restore from an external SD card and from just creating my own TWRP backup folder, TWRP just wouldn't see the backup until I copied and replaced. I'm glad it worked and I hope it helps anyone else who needs a restore.
Credit goes to jmreyesiii for providing the backup files and vampirefo for the rooting.
Click to expand...
Click to collapse
It's says root only on Linux I have windows xp does anyone know how I can root this on this type of computer thank u
Here is a question, we bought one for the grandson.. How come when you open up the play store, and choose apps, it does not show any that came with the tablet itself, kind of like you see when you go to play store on a smartphone..
really need some help
ericzollman said:
I rooted and removed the encryption from my ARES 8 but then when messing with an (official) flashing tool I ended up formatting my system partition., So I had NO OS at all., But I did have TWRP., And now thanks to your post I have a living breathing working tablet again., By all your gods (or none at all if that's your thing) I Bless you! Thank you X Infinity! :good::good::good::good::good:
-Eric.
P.S. I got it to work from my SD card but I did have to make a backup with TWRP first, then pop the SD card into the PC delete all the files from the folder and copy your files into the folder that TWRP had created. Otherwise it didn't show up at all... Anyway Thanks again! :victory:
Click to expand...
Click to collapse
i am having the same basic problem, i flashed twrp and supersu not sure what i did wrong or if it rooted succesfuly, i do have twrp but wont boot past recovery. twrp says it cant mount data and i cant back up., and have no os. how can i fix this ?
im new to this whole thing so please give me step by step if you can and any links or downloads you can, please help :crying: this tablet is how i comunicate w my daughter... in colorado. i need it up and running
I partitioned my Ares 8 and now it is stuck awaiting fastboot command. Any ideas?
Can someone help me? Why does mine fail when restoring system?
My ares 8 is stuck in DNX mode and will not enter recovery, and is pretty hosed. I need a scatterfile and rom so I can flash it and use it for something besides a paperweight. Thanks 1000 times in advance!
Ahhh, after several hours of reading, I managed to get recovery back, but cannot seem to flash a rom successfully, and also my backup - says it was successful but when I reboot, it goes straight to DnX mode and I have to use a batch file to get back to recovery. But progress has been made and hopefully by today I will have it back up and running an OS
Hi, i have Nextbook Ares 8 after rooing i can't boot the device it has an error says "Your device is unable to start because the Android OS image has failed to verify" please help me to fix this problem.