Database Info

Cm7 on Desire HD - no market!

Hi
Recently flashed cm7.0.3 on my DHD after the usual nandroid backup etc. Had to wipe data and cache first. After the cm flash I flashed the latest gapps.
The phone boots fine but with no Android market and no Google apps. I understand that the gapps process has changed so I must be doing something wrong, but what??
Thanks!
George
Sent from my Desire HD using XDA App

Did you use Rom Manager or did you flash from Recovery? May be worth trying whichever method you didn't the first time around.

You need to download the GAPPS file located most likely in the same thread you downloaded the CM7 files. You will have to use CWM to flash the GAPPS file and once done you will have the market once the phone boots back up.
I ran in to the same issue when I installed CM7 on my Captivate and once I found the GAPPS file I was golden!

Aha! Got ya. I've been trying to flash gapps from recovery - I take it that doesn't work then? Haven't used CWM for *ages* but am sure I can guess my way thru it.
Thanks!

gapps have to be flashed from recovery. yes. try rom manager in your phone. it makes the process a lot easier. press Download Rom - CM - and choose the latest stable. it will then ask you abt gapps, just check that box and you are set

Sorted
Thanks for the tips, got it working in the end. There were a couple of problems stopping me flashing GAPPS:
- Clockwork mod was an old version - had to try a couple of times to upgrade it, kept failing, worked after complete wipe and reflash of CM7
- I had been trying to install GAPPS from recovery. Tried from CWM after the upgrade and it worked fine.
Cheers for the help.

[Q] Cant install new kernels

Hi guys, I'm using the CM9 ICS with my transformer and I was trying to install a different kernels without any success at all. I've booted into CWM (V5) and installed from sd card but when I restart the machine, It's always with the same kernel. Can someone suggest how to make it work?

How long does the install take? That should give some insight onto what it is doing

yosi199 said:
Hi guys, I'm using the CM9 ICS with my transformer and I was trying to install a different kernels without any success at all. I've booted into CWM (V5) and installed from sd card but when I restart the machine, It's always with the same kernel. Can someone suggest how to make it work?
Click to expand...
Click to collapse
Just to be sure, CWM v5 will not read external uSD card, only the internal storage /sdcard. May I know the kernel you are installing?

It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.

have u tried wiping the cache and dalvik before flashing them?

scottyf79 said:
have u tried wiping the cache and dalvik before flashing them?
Click to expand...
Click to collapse
Yes I have... no good

yosi199 said:
It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.
Click to expand...
Click to collapse
A minute is way too long. Kernels only take like 3 seconds cuz they are small.
Try mount /system under mounts and storage before flashing the kernel.

yosi199 said:
It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.
Click to expand...
Click to collapse
Flashing a new kernel takes a few seconds. After reboot please pay attention to the blue indicator below the Android figure. It this not appears something went wrong with the first stage of the flashing process, invalid image/zip file etc.
Please use the customized CWM version, just not the flashed one from the Rom manager. I'v good experiences with the R2 (internal sdcard only) as well with the R1 (external micro-sdcard only). I preferred the R1 version.
Btw I'v have the best experiences with my TF101G with the CM9 build of March 29 combined with the quevor-test8 (just NOT from the guevor thread but ONLY from the thread of Richard because it's compiled for CM9) kernel, no reboots and no deep sleeps anymore while 3G and Wifi is working fine. Please do not wipe or clear something before flashing the new kernel to prevent Wifi problems. And I'v the best experiences not using the reboot system now from CWM but using power down and switch on the TF manually.

antond57:
i too have been having trouble getting kernels to allow overclocking...i flash one, all looks ok but when i get to tablettop the kernel info appears unchanged and setcpu wont clock past 1000.
could you maybe please post links to the rom and kernel you used? im having trouble locating the Richards R1 and R2 versions. i would like to see if i can repeat your success w/ these versions.
much appreciated.

I have same issue except worse yesterday. I'm on latest CM9. I tried to flash guevro test 9 and I did wipe both cache. Using roach 2 recovery. Just stayed on Asus screen. Blue bar did pop up and take a second or so but nothing. Checked md5 and all was good.
I had to totally flash ROM again after a full wipe because even a restore from recovery wouldn't go past very first Asus screen. I'm not sure what happened but I'm definitely now worried about trying a new kernel again
Sent from my Transformer TF101 using xda premium

eminembdg said:
I have same issue except worse yesterday. I'm on latest CM9. I tried to flash guevro test 9 and I did wipe both cache. Using roach 2 recovery. Just stayed on Asus screen. Blue bar did pop up and take a second or so but nothing. Checked md5 and all was good.
I had to totally flash ROM again after a full wipe because even a restore from recovery wouldn't go past very first Asus screen. I'm not sure what happened but I'm definitely now worried about trying a new kernel again
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Yap, I have the same problem. Nandroid restore did not restore to the previous state. For me, re-flash the ROM fixed the problem (no full-wipe).

Try Using clockwork recovery
I have just flashed guevor kernel as well with no problems. I'm using clockwork mod recovery. Have you tried it?

[Q] TWRP Q&A

Dont want to muck up the CM7 thread and no thread was started.
FB Im wondering if twrp is fully wiping when you run the wipe option. I used the kj6 heimdall one-click to get back from a bad flash. However once I finally was able to get everything set back up I had restored some apps through Titanium Backup, but only app no data. Amazon app store was one and I had to delete the backup and uninstall the app, reboot clear cache and then re-install it to get it to work. The theme chooser app was fcing on me until I did the same thing.
After I did this I applied a theme apk that borked me. I was stuck on the team acid logo. No boot loop just stuck. I then one clicked to kj6 again, then used antonx kernel one click. Made a new backup of my efs, wiped everything including boot img. Flashed the twrpcm7 zip and followed the directions to finish.
I know anything is possible but is it likely that twrp is seeing something not wiped in the bml to mtd conversion and its causing conflicts?
If your not comfortable with the possibility of bricking your phone do not follow my steps and format everything. Formatting boot has the possibility to brick your device.

Hmm, well /data isn't getting wiped in R11. Bryan submitted a patch for updater.sh that should take care of this though I haven't tested it. I haven't tested a BML->MTD (cm7-twrp) flash though, but I'll have to look into it in the next few days. I'm running a rom build right now, so I'll probably test that out tonight.

I didn't wipe anything, I just flashed the twrp boot.img. I am running Team Kick Asses MIUI Revenge (MTD). After I flashed and the phone booted, wifi would not turn on, and it said error underneath the button. Pulled a logcat but all it said was wifi failed to initialize. Is that error due to the fact I didn't wipe anything or factory reset/fix perms?
Either way, it is super sweet recovery!

Max says its a driver issue. Ill find the post and link it.
m4xm4n said:
The reason wifi didn't work is because the wifi module needed to be from the same kernel build. I'm not sure how FB built the two builds, so I don't know if he included a module from a different kernel build or not.
Try the R11B with TWRP and then install R11(not B) with inject TWRP enabled.
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse

Now that you have twrp make a cwm zip for the r11 kernel, flash it via twrp and leave the "inject twrp" option enabled. You should get working wifi and twrp
Sent from my SGH-T959V

Like I said on cm thread the wifi module is different from the one Max used on his new boot.img which is why twrp and the new boot.img doesn't work with the current miui build ...the first release of dianxin os had the new boot.img fb sent me and that was the wifi issue.
sent from my batcave

I flashed miui on with twrp doing a wipe firs and it installed miui fine, with wifi and everything seems to be fully functional. Just to be safe I wanted to test out twrp on miui, however the only way I could get to it was volume up+down+ power. But that loads it right up, and I flashed a few different modems to see which gave me the best signal, and it worked each time. Btw, nice work fb twrp is great.
Sent from my SGH-T959V using xda premium

Which modems did you flash? If the modem flash DID work you should be able to go into Settings > About Phone and check under baseband version. I'm not sure if that's the exact menu on MIUI but there should be something very similar.

I just flashed kg4 and that's what it says under baseband version, I flashed kd1 earlier and that's what it said before I just flashed kg4. Just to make sure it was working. I think it says t959vuvkg4 or something to that effect, it definately just changed though from kd1
Sent from my SGH-T959V using xda premium

Hey guys just a progress report on this. I've been messing with a twrp injection cwm zip all evening. After some discussion with bhundven, the way we're going to go about this is to NOT include twrp by default in cm7. It's been really hard to get a working copy compiled and included with cm7 and if we can't do this automatically there's no point to doing it at all.
The CWM zip will (hopefully) allow us to give you the option of using TWRP even if you're using CWM at the moment. The benefits are the following:
You won't need to mess around with kernel features that don't work (wifi was broken, ffc was broken)
You only really need to inject twrp once via CWM since twrp comes with an inject option before you flash a CM7 update.
It'll make it easier on us since we'll have less releases and thus have to provide less support.
At the moment I'm trying to have something for you guys tonight, but the chances are slim for that happening.

FB
For some reason TWRP can't Flash Zip file like Mtd modem kd1. I try to make a nandroid bk and didn't work. Also I try to save error logs on sd card didn't work.
My english is not the best, sorry
Sent from my SGH-T959V using xda premium

Please post the logs here.
What errors did you get when trying to flash the kd1 modem or make the nandroid backup? I've tried making and restoring a nandroid backup using CM7 R11 with twrp injected by the zip and it's worked fine for me.
What rom/kernel combination are you using?

Error: Unable to open zip file
I try nandroid backup again and for some reason did work but wasn't working.
Am using CM7 R11B & CWM TWRP
Everyting else is working good thanks!!!!
Sent from my SGH-T959V using xda premium

NS 9020t - problem flashing marmite_v4.4 kernel to miui 2.9.7

I'm having a problem flashing marmite 4.4 to the newest miui build (2.9.7).
Basically in cwm recovery and flashed the kernel.
Will say "ununderstandable message 3" and "lid is licked"
Reboot the device and it will get stuck on the miui boot screen.
Tried installing both the "stock OTA" and "All other ROM" version of marmite.
Same message comes up.
Already tried performing a full wipe (actual full restore, format system, format boot), reload the ROM.
Tried wipe cache and dalvic (even though it is not needed)
Just wondering if there is something incompatible or not.
I was able to flash air kernel without issues.
I haven't tried an older version of marmite yet, but will try later.
I'm not blaming marmite, it could be miui as well, or it could be just me.
I'm certain I'm flashing correctly.
I read bedalus' marmite post and saw 2 others with this issue (not same version of kernel or ROM).
The suggestion was that they didn't use the correct kernel for ROM.
I would assume miui would not be categorized as "stock OTA", so I tried "all other ROM" version first"
Am I doing something wrong?

There is a new version 4.5 the message you get I believe is like a joke. It does show however that the installation was successful.
Never experienced boot loops flashing his kernels.
Sent from my Nexus S

Actually, I downloaded that one just now to try and same issue.
It will just stall at the miui (ROM) boot screen.
I am trying some other stuff right now as well.
Really want to use this kernel. :good:
I'll report back later.
Thanks for the help.

Good luck. His kernel offers great speed and stability!
Sent from my Nexus S

For marmite 4.5, did a full wipe again, even formatted the SD partition.
So flashed miui 2.9.7.
Booted to the ROM.
Made sure things seem normal in the ROM.
Restarted just to be sure.
Boot back to recovery.
Flashed marmite 4.5
And it is stuck on the miui loading screen again.
Only thing I haven't tried this time is to fix permissions. (didn't wipe cache or dalvic either)
I'll try it again. :laugh:

Since I formatted the SD partition, it should rule out that it was something on the SD card right?
It's time consuming to copy things back to the NS.
I'll try an older version of marmite afterwards and then an older version of miui.
It should tell me what is causing the lock up by then. I think. :silly:
.... yes I have a lot of time ....

I forgot to mention one thing.
I'm flashing the official Chinese version of miui 2.9.7.
Wonder if that's the cause.
I guess I will download the US or UK version to try as well.

Well if your phone boots with original kernel, it must be kernel related. There's no need to wipe anything before flashing a kernel. Just flash it. It could be that the Chinese rom is different from the others, but that's a guess I'm no expert on compatability.
Sent from my Nexus S

kwibis said:
Well if your phone boots with original kernel, it must be kernel related. There's no need to wipe anything before flashing a kernel. Just flash it. It could be that the Chinese rom is different from the others, but that's a guess I'm no expert on compatability.
Sent from my Nexus S
Click to expand...
Click to collapse
Took some time to test, but sort of found my answer.
It's the official Chinese miui that's causing the issue.
Well at least some component in the ROM.
I tested with the MIUI UK (miuiandroid) version 2.9.7 and it installed like a charm.
Before flashing the UK version, I tested with earlier versions of marmite (4.3 and 3.5) on the Chinese 2.9.7.
All failed at the ROM boot screen.
I should check with the miuiandroid team and see what they changed that made it different.
When I was testing I did a full wipe, installed ROM, booted ROM, boot to recovery and flashed the kernel.
I didn't even wipe cache or dalvic (which is not needed anyways).
I had to do a full wipe because the ROM just wouldn't boot back up afterwards.
I'm tempted to test with an earlier version of the official Chinese miui and see if it makes any difference.
... too much time and/or no life ... :laugh:

Lol, well it's good you found your answer So its not a waste lf time as you learn from this
Sent from my Nexus S

If you flash air kernel, and if it worked, I guess marmite's boot.img type can cause a problem.
Sent from my Nexus S using Tapatalk 2

Articudos said:
If you flash air kernel, and if it worked, I guess marmite's boot.img type can cause a problem.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Not sure what the boot.img type is, but I'll look it up. Thanks.
I posted on miuiandroid forums and someone replied saying that the Chinese version is odexed and not busyboxed.
UK and US version is definitely deodexed, I downloaded them and checked. I haven't found out how to check busybox.
I have a few choices.
1. I can use the UK or US version, since I was able to flash marmite on them... easy way out.
2. Find out how to deodex the ROM and, I guess, how to add busybox (?)... I get to learn more stuff.
3. Use a way faster ROM (eg. Paranoid Android - great ROM by the way!) and flash marmite on it as well... but really want to use miui again.
Thanks guys for your help though. Really appreciate the information. :good:

Glad you found a solution

[Q] Recovery boot loop

I brought my phone to stock. Installed a rom. Fine. Went back into CWM recovery. Every time I reboot the phone (power button or in recovery) it returns to recovery.
I brought my phone back to stock again. Installed another rom. Went back to TWRP. Again, I can't reboot the system, only return to recovery.
Is there a way to fix this, or can I never use recovery after installing a rom?
{I'm sure this question has probably been asked before, but I've been searching for hours and can't find a fix.)

Did you wipe data & caches? What did you flash and how? Cwm, heimdall or Odin? Sgh-t959v under battery?
Find lumin30's guides. They/he will steer you straight.
Sent from my SGH-T959V using xda app-developers app

t1op said:
I brought my phone to stock. Installed a rom. Fine. Went back into CWM recovery. Every time I reboot the phone (power button or in recovery) it returns to recovery.
I brought my phone back to stock again. Installed another rom. Went back to TWRP. Again, I can't reboot the system, only return to recovery.
Is there a way to fix this, or can I never use recovery after installing a rom?
{I'm sure this question has probably been asked before, but I've been searching for hours and can't find a fix.)
Click to expand...
Click to collapse
This would occur for me when I had installed an incompatiable kernel with the ROM I am trying to install. I would fix this problem by either looking at the thread for a compatiable kernel if it does not come with one, or if it is an ICS ROM, Team Acid's ICS Kernel works fine. I think Team Acid's ICS kernel is included in their unofficial AOKP release if you have that downloaded. I hoped this help!

WayTooGosu said:
This would occur for me when I had installed an incompatiable kernel with the ROM I am trying to install. I would fix this problem by either looking at the thread for a compatiable kernel if it does not come with one, or if it is an ICS ROM, Team Acid's ICS Kernel works fine. I think Team Acid's ICS kernel is included in their unofficial AOKP release if you have that downloaded. I hoped this help!
Click to expand...
Click to collapse
All of our ROM's have kernels. It is the kernel you flash from that makes a difference. And once you flash the ROM, the kernel that is packaged with the ROM replaces the kernel you previously had/flashed from. However, the OP of the ROM's usually specify what you need to do to flash the ROM.

lumin30 said:
All of our ROM's have kernels. It is the kernel you flash from that makes a difference. And once you flash the ROM, the kernel that is packaged with the ROM replaces the kernel you previously had/flashed from. However, the OP of the ROM's usually specify what you need to do to flash the ROM.
Click to expand...
Click to collapse
Ah I see. But my point was that some ROMs state that the user must be on an ICS ROM/Kernel to flash this. I guess I wasn't very clear as I am new here and lack understanding.

champ1919 said:
Did you wipe data & caches? What did you flash and how? Cwm, heimdall or Odin? Sgh-t959v under battery?
Find lumin30's guides. They/he will steer you straight.
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
I used Odin to return to stock. I used Super One Click to root. I used root explorer modify the recovery to allow me to boot into "CWM final for Froyo". That much each and every time.
The first time I installed
[TFQ - 30/12/2012]X.A.O.K[Kanged - Xperia Style]
That is an ICS rom. Installed fine with a new CWM.
The second time I installed the same.
The third time I installed
ROM-MTD-TWRP-ICS-4.x-Audiophile
That is another ICS rom. Installed fine with TWRP.
Each and every time, when returning to recovery to flash more, I got stuck. I can't boot to anything except recovery.
My brother suggested that the problem is using the Volume up and down and power button ("three finger salute") to return to recovery instead of from OS power down menu.
For a fourth time I started over again. Now, using the reboot>recovery, everything works fine.

One thing, you need to have ginger bread bootloaders. So, when you say Odin back to stock, are you referring to kj6?
You could cut down some of the work by using Odin to flash a kernel with recovery & root in it. Antonx & drhonk both have kernels that will do that with odin.
I flash bhundven's cm9 Rom before jumping to any of the others(and wipe between). I believe some of the Rom authors have that in their instructions.
Sent from my SGH-T959V using xda app-developers app

Yeah... GB bootloaders, not Froyo. Your return to stock should be a return to GB stock, not Froyo... and your return to stock can be a return to a rooted stock. If you want to make your life less painful.
It's about MTD to BML, not really about the base version. You just don't want to wipe out what allows later stuff to actually work properly...

Thanks for the advice. I haven't used custom roms very much. Trying to figure out which ones to choose was difficult. I started on stock Gingerbread, but everything I encountered in searching indicated that I needed to go back to Froyo to get CWM then go from there. ...Perhaps I kept running into very old instructions? In any case, should I need to go back to stock again some day, I'll try to figure out which GB roms I could use, including root and custom recovery.
I guess the solution to my problem is: 1) flash back to Froyo or Gingerbread; 2) after flashing an ICS+ rom, only go to recovery from OS reboot menu (never "three finger salute").
I'm actually surprised that people don't run into this problem more often, enough to create a sticky about it. I'm sure I'd still be pulling my hair out if my brother hadn't run into the problem on his Fascinate a year ago.

On mine, the 3 finger boot to recovery works fine. Then again, I haven't been on Froyo since Samsung and TMo said to stop using Froyo back in November (October?) 2011 with the official 2.3.6 update. And the only boot-loops I have, whether recovery is booted through the menu or salute, are when I flash something invalid.

Theraze said:
On mine, the 3 finger boot to recovery works fine. Then again, I haven't been on Froyo since Samsung and TMo said to stop using Froyo back in November (October?) 2011 with the official 2.3.6 update. And the only boot-loops I have, whether recovery is booted through the menu or salute, are when I flash something invalid.
Click to expand...
Click to collapse
Interesting... Perhaps if I went back to a gingerbread stock then upgraded to ICS the problem wouldn't occur?
I'll have to try that the next time I might need to return to stock.

Hello,
First I just want to say thank you to the mods for running a great forum and to the devs for keeping this device current.
I just struggled over a period of days with this issue.
The end result being, that you need to go to CM9 BEFORE you try JellyBean or later!
Just hope this helps someone else who missed that instruction.
Thanks devs/mods/everyone for keeping this device alive!!!! :good::good::good:
*EDIT* correction... i THINK you need to go CM9 Before trying something else

Not all ICS ROMs require CM9, but you must have at least CWM5 recovery to be able to flash CM9 or these ROMs. Follow ROMs' OP instructions.
I personally tested HebMIUI flash over Stock GB with CWM5 (Basic with a twist kernel) without going through CM9.