[Q] Nexus s driver problem - Nexus S Q&A, Help & Troubleshooting

Hi,
I tried to root my nexus s but when i try to install the drivers i go to device manager and i can't see adb interface. What can i do.Is there any way to root my phone without a pc.

Check out the video for clear directions

thanks i made it

Related

Let's root the i858 - ADB access is here!

Okay, I have been able to get ADB access to the I-Mobile i858; but I cannot get root. There is an SU program and Busybox pre-installed on this device. I tried changing the permissions of SU to 4755 and 6755 without success. It looked like it was trying but something is interfering with root. Maybe if we work together we can figure this out. I even modified a flash image to set the permissions when it flashed the new image. That still did not give me root.
Here is how you get ADB to connect. It is kind of a pain but at least now we can talk to the device.
1. Install the "Android Terminal Emulator" by Jack Palevich from the Android Market to your device.
2. Download the Android ADB device drivers from this link and un-rar them.
http://www.generalmobile.com/support/dstl1/DSTL1_USB_Driver.rar
3. Open Device Manager on your computer.
4. Make sure debugging is turned off on your device in Settings>Applications>Devices.
5. Open the Terminal Emulator you downloaded in step 1 and type in the following command "<enter>setprop persist.service.adb.enable 1<enter>".
6. Go back to Settings>Applications>Development on your device and turn USB Debugging on. Click OK when prompted to confirm.
7. Plug the USB cable into your i858 and then your computer's USB port. In my tests using a reliable hub is okay.
8. You will see a device under Universal Serial Bus Controllers that says either "USB Mass Storage Device" or "USB Composite Device." Watch that section in Device Manager to see which one is the new one when you plugged in your device.
8. Uninstall the Mass Storage or Composite Device that was added to Device Manager when you plugged in your computer. You do this by right-clicking it and selecting "Uninstall".
9. On Device Manager Click the Actions pull down menu and click "Scan for hardware changes".
10. If you are lucky an unknown Android Device will no be listed in the Device Manager as not working due to no drivers installed. Go to properties of this device and update drivers browsing to the folder when you unzipped the drivers downloaded in step 2 above. The Android ADB drivers will now install.
11. If that doesn't work keep uninstalling the Mass Storage or Composite Device and rescan until the Android Device appears in Device Manager.
12. If you unplug it you will have to go back to step 4 but you can skip step 5.
13. If you reboot or turn off your device you will have go to back to step 4.
14. Unfortunately, I have to do this ritual every time I want to connect to the device by ADB; but heck it sure beats having no ADB access at all.
Now that you guys have ADB access let's rock this device, root it and have some fun. I spent all day trying to root it without success. I did manage to make the phone do some weird things and reboot a couple of times. I was changing permissions for the pre-installed "su" program in "/system/bin" but obviously there is something else that needs to be done to root this device. At least we are one or two steps closer now.
Thanks for sharing with us your work
For me i just delete apps befor i flash the rom because after when the apps installed i can t delet them because there are protected.
closer66 said:
Thanks for sharing with us your work
For me i just delete apps befor i flash the rom because after when the apps installed i can t delet them because there are protected.
Click to expand...
Click to collapse
If the device was rooted then you could delete them on the phone.
I-Mobile i858 has been rooted!!!
Okay, the I-Mobile i858 comes pre-rooted but there is something wrong with the way it was setup and root doesn't work. You download a program called Universal Androot and let it re-root the device so that it corrects whatever mistakes the ODM put in that made root not work. In your browser go to the following URL and install the program.
http://bit.ly/cwNm9u
When you run the program it says the device is already rooted; but there is some problem as the rooting is not complete. So you tell the program to root the device again. After it is done the device is rooted and stays rooted after reboot. Programs like Boot Control that require root access now work. There is a SuperUser Authorizer app that will intercede the first time and ask you if you want to give root permission to that app. That is a good thing and will protect you from malicious programs getting root that can cause you all kinds of nightmares.
But, I am root and I still cannot uninstall the pre-installed apps. How do you do that even as root? I am missing something.
hey great new s thanks for your work today i went to the i-mobile shop in samui and there say rom update is official confirm to 2.1 or maybe 2.2 there dont know excactly
Now i have root thanks. But following problem when i try to delete some apps that pre installed.
Says delete it but in real do not delete the app ummm
do you have any id why i can not delete the apps??
closer66 said:
Now i have root thanks. But following problem when i try to delete some apps that pre installed.
Says delete it but in real do not delete the app ummm
do you have any id why i can not delete the apps??
Click to expand...
Click to collapse
Any pre-installed apps cannot be deleted the normal way. Install Titanium Backup from the Android Market and let it have root when requested. You can use that program to uninstall pre-installed apps with root.
Rooted! ADB! Now this device gets much more useful! Great work jboxer, thanks!
BTW the rooting app has been updated to v1.6.1
Home page:
http://blog.23corner.com/tag/universalandroot/
Download:
http://bit.ly/aa4jxJ
Follow this Link droidsans.com/node/4018

[Q] ADB drivers uninstalled, can't reinstall

Hi guys, i accidentally uninstalled Android drivers i used for adb access and now when i try to reinstall them like i previously did it won't find the drivers as i point them in the folder. i used a few guides (like this: http://android.dkszone.net/setup-install-adb-android-debug-bridge-windows-7) but no solution. i think it is a different thing. can you help me out. i use win 7-x64 my phone is huawei u8110

[Q] how to root gingerbread when the usb driver fails to install properly?

hi i have lemon p5 which is gingerbread. i have tried using z4root, pramaroot and gingerbreak but none work. i have not tried rooting through pc because i can't install my device on my pc which is running windows 8 os. i tried to update the drivers marked yellow on the device manager but it could not find the driver. Guys i have been dying to root my phone as my internal memory is running out. please any help will be much appreciated.
if you have the driver i would be overwhelmed if you kindly take the trouble to share it with me. Thank you.
Try this app called Super One Click. It is pretty easy to use and it also downloads the adb drivers for your phone. It can be downloaded as a zip. There is also a demo on Youtube.

[SOLVED]Xperia L Drivers And ADB Problems

Hi there
I have seen some posts where users are having difficulty connecting Xperia L to their PC or ADB. Therefore, I am writing this guide to help you all.
The guide was prepared using Windows 7 Ultimate but should work with Windows XP and Windows 8.
Firstly, Sony uses a different driver for their Xperia devices and therefore, sometimes you are unable to install drivers for your devices especially for ADB commands.
IF YOU ARE LUCKY
There are few ways to get around to install drivers for your device. The most convenient and easy is you plug in your device and wait for automatic detection of your device. Make sure you have USB connected as MTP in MY XPERIA in SETTINGS of your phone. The device drivers would be automatically installed by Windows update.
METHOD
If suppose you can not install your drivers, connect your xperia and then on your PC, go to My computer > Properties>Device Manager.
You should see an undetected hardware with a yellow exclamation mark over it. Open it and click on update my drivers. Then choose GOOGLE DRIVERS by choosing hard-drive. This should install the drivers for you. If this doesnot work. Try the attachment with the post where the drivers are modified to work with Sony Xperia Devices.
Follow the same steps but this time choose the attachment folder to search for drivers. It might say, the drivers are not verified. Just Ignore it and carry on installing them. You will need to unzip these files.
IF suppose you do not see any exclamation mark while you connect your xperia. Just go to control panel and add new hardware. Select, I will choose my device and then install from hard-disk. Select the folder where you have unzipped the files and you are good to go. The name of new hardware is not important as windows will read the drivers files and install drivers for Xperia.
This will install all drivers for your device. If there are two or more drivers while installing them. Redo the steps and install all of them individually.
Suppose your ADB still doesnot work, then
FOR ADB DRIVERS :
Download the ADB Universal Drivers and connect your device. Then hit install. The ADB drivers will be automatically detected and installed.
Further, if these tricks fail, you can delete the unknown driver from your control panel and then try finding it again by using refresh button(scan for new hardware changes) in device manager.
Another trick is to click on unknown drivers and delete them. Connect your phone and restart your phone. Then scan for new hardware in device manager. The drivers should be installed for your device.
If still there are some problems, I will try to help you out.
DOWNLOAD LINKS
DOWNLOAD GOOGLE DRIVERS FOR MTP/ PC ETC
https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
DOWNLOAD UNIVERSAL ADB DRIVERS HERE :
http://adbdriver.com/upload/AdbDriverInstaller.exe
UPLOADED FILE : Sony Xperia Drivers for ADB.
UPDATE :
Use flashtool drivers to install adb/fastboot/flashboot drivers. This is the most simplest and easiest method I have come across lately.
Simply download flashtool
http://www.flashtool.net/index.php
Go to folder where you have downloaded it. Usually C:/flashtool/drivers.
Select the drivers for your particular device. I use universal for all three types of drivers. It is helpful to boot into fastboot/Flashtool before installing the drivers but not necessarily.
Good Luck
Reserved
This is great Hnk1 thanks a bunch
joel113- said:
This is great Hnk1 thanks a bunch
Click to expand...
Click to collapse
I am glad I could be of help
Good work
Hnk1 said:
Hi there
I have seen some posts where users are having difficulty connecting Xperia L to their PC or ADB. Therefore, I am writing this guide to help you all.
The guide was prepared using Windows 7 Ultimate but should work with Windows XP and Windows 8.
Firstly, Sony uses a different driver for their Xperia devices and therefore, sometimes you are unable to install drivers for your devices especially for ADB commands.
IF YOU ARE LUCKY
There are few ways to get around to install drivers for your device. The most convenient and easy is you plug in your device and wait for automatic detection of your device. Make sure you have USB connected as MTP in MY XPERIA in SETTINGS of your phone. The device drivers would be automatically installed by Windows update.
METHOD
If suppose you can not install your drivers, connect your xperia and then on your PC, go to My computer > Properties>Device Manager.
You should see an undetected hardware with a yellow exclamation mark over it. Open it and click on update my drivers. Then choose GOOGLE DRIVERS by choosing hard-drive. This should install the drivers for you. If this doesnot work. Try the attachment with the post where the drivers are modified to work with Sony Xperia Devices.
Follow the same steps but this time choose the attachment folder to search for drivers. It might say, the drivers are not verified. Just Ignore it and carry on installing them. You will need to unzip these files.
IF suppose you do not see any exclamation mark while you connect your xperia. Just go to control panel and add new hardware. Select, I will choose my device and then install from hard-disk. Select the folder where you have unzipped the files and you are good to go. The name of new hardware is not important as windows will read the drivers files and install drivers for Xperia.
This will install all drivers for your device. If there are two or more drivers while installing them. Redo the steps and install all of them individually.
Suppose your ADB still doesnot work, then
FOR ADB DRIVERS :
Download the ADB Universal Drivers and connect your device. Then hit install. The ADB drivers will be automatically detected and installed.
Further, if these tricks fail, you can delete the unknown driver from your control panel and then try finding it again by using refresh button(scan for new hardware changes) in device manager.
Another trick is to click on unknown drivers and delete them. Connect your phone and restart your phone. Then scan for new hardware in device manager. The drivers should be installed for your device.
If still there are some problems, I will try to help you out.
DOWNLOAD LINKS
DOWNLOAD GOOGLE DRIVERS FOR MTP/ PC ETC
https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
DOWNLOAD UNIVERSAL ADB DRIVERS HERE :
http://adbdriver.com/upload/AdbDriverInstaller.exe
UPLOADED FILE : Sony Xperia Drivers for ADB.
Click to expand...
Click to collapse
:good: Good work
Installing these drivers didn't work, But after a factory reset and installing the Sony companion, the drivers installed and now gets detected in the ADB.
Thanks
ReSkid said:
Installing these drivers didn't work, But after a factory reset and installing the Sony companion, the drivers installed and now gets detected in the ADB.
Thanks
Click to expand...
Click to collapse
Did you try the attached drivers ?
I am just wondering you might hadnot turned USB debugging or disabled MTP mode or something you might have done to your kernel/ROM that might have changed the environment of your phone which factory reset reverted back. These drivers are NOT the drivers for connecting your device to your PC. These are used when you are unlocking your bootloader or working with ADB/fastboot commands.
Thanks for your contribution about how it worked for you and it might help others who might have a problem!
you can use ADB Wireless
https://play.google.com/store/apps/details?id=com.sherdle.adbwireless&hl=en
Hnk1 said:
Did you try the attached drivers ?
I am just wondering you might hadnot turned USB debugging or disabled MTP mode or something you might have done to your kernel/ROM that might have changed the environment of your phone which factory reset reverted back. These drivers are NOT the drivers for connecting your device to your PC. These are used when you are unlocking your bootloader or working with ADB/fastboot commands.
Thanks for your contribution about how it worked for you and it might help others who might have a problem!
Click to expand...
Click to collapse
I had tried every possible driver haha! Also had everything like USB Debugging etc turned ON, I guess it might have been some app I had installed. Anyways now I have rooted it successfully.
Thanks a lot for your help.
I am still having this problem for days now. still no connection to pc/flashtool whenever i try to reboot into flashmode/flashboot. i've been google'ing around. and i've tried this method but it's seems doesnt work. i've already got tons of these unknown devices, and the driver doesnt work(or maybe im too noobish to install them).please help
ReSkid said:
I had tried every possible driver haha! Also had everything like USB Debugging etc turned ON, I guess it might have been some app I had installed. Anyways now I have rooted it successfully.
Thanks a lot for your help.
Click to expand...
Click to collapse
I am here for anything that I can help you with. It's great that your problem is fixed now !
AATrooperz said:
I am still having this problem for days now. still no connection to pc/flashtool whenever i try to reboot into flashmode/flashboot. i've been google'ing around. and i've tried this method but it's seems doesnt work. i've already got tons of these unknown devices, and the driver doesnt work(or maybe im too noobish to install them).please help
Click to expand...
Click to collapse
For a second when I looked at your images, I was just baffled. THOSE MANY UNKNOWN DEVICES! That can't be right you know.
There must be only ONE unknown device that ought to be installed as mentioned above in my post.
Do you see these devices when you connect your phone to your PC or those unknown devices are already there?
Have you tried windows update to fix it?
Tell me more about why you see so many devices.
If suppose, they are already there, just see which device comes up when you connect your phone and try installing drivers for that particular device.
Also, i suggest just go for add a new device and then select hard disk and then install drivers which are attached. I hope that fixes your problem.
REMEMBER your device must be connected when you are trying to install the drivers
right.i'm gonna give it a try,wish me luck. thanks!
I still need your help!!
I could not install or might be dont know how to install the attached xperia drivers which are in .dll files. Can u explain in detail how can I install it. I've lost root access after upgrade to 4.2.2 . I do really need your help to get back root access and install a valid driver for my device. From C2104
Hnk1 said:
I am glad I could be of help
Click to expand...
Click to collapse
Dude someone needs your help ^
I just quoted your post so you'd get notified about it.
@up ur post is a simple spam, if u dont know how to help just dont write anything. n one needs notifications for replying
FPThatea said:
I could not install or might be dont know how to install the attached xperia drivers which are in .dll files. Can u explain in detail how can I install it. I've lost root access after upgrade to 4.2.2 . I do really need your help to get back root access and install a valid driver for my device. From C2104
Click to expand...
Click to collapse
just go to device manager, connect phone and find ur not recognized device; then right click on it and press update/install drivers. From the window that will appear choose socond option (it should be something like manualy find drivers or something like that), then navigate to that downloaded folder. This way it should install them
But XL doesnt need any external drivers. If u install fasboot an flashmode drivers from flashtool folder they should work; they are working for me and for anyone i know. U may also install SEUS and then connect phone. This way u dont need that drivers, but ofc what i have mentioned earlier should work.
FPThatea said:
I could not install or might be dont know how to install the attached xperia drivers which are in .dll files. Can u explain in detail how can I install it. I've lost root access after upgrade to 4.2.2 . I do really need your help to get back root access and install a valid driver for my device. From C2104
Click to expand...
Click to collapse
Hi
well first thing you need to understand is there are three drivers you need to install to make everything work including fastboot , flashboot, and Xperia L storage and SD card.
To install each type of drivers, you must have the phone in that particular state. To install normal drivers (for mass storage and PC companion), if suppose not detected automatically, you need to turn on your phone and then unlock it. Then see if drivers are found or not!
If the windows give you the error like undetectable device attached, go to my computers and then properties and the device manager and look for any device with an exclamation mark (yellow).
click on it and then select update drivers and use drivers that have been attached in the first post. (Remember to extract the attachment in a folder)
Then click on select drivers from hard drive (click manual installation of drivers )
and locate the folder where you have extracted drivers. This will install drivers!
if you want drivers for flashmode/fastboot, turn off phone and boot into flashmode and then install drivers as I mentioned above.
I'm quite certain they wouldn't trouble you at all. If you still need help, do not hesitate to ask !
Good luck
P.S: You will need to enable developers option and select USB debugging to root your device. I hope you are doing that right !
Joel16 said:
Dude someone needs your help ^
I just quoted your post so you'd get notified about it.
Click to expand...
Click to collapse
Thank you so much ! I only check my notifications so I really appreciate it
uremytoy said:
@up ur post is a simple spam, if u dont know how to help just dont write anything. n one needs notifications for replying
just go to device manager, connect phone and find ur not recognized device; then right click on it and press update/install drivers. From the window that will appear choose socond option (it should be something like manualy find drivers or something like that), then navigate to that downloaded folder. This way it should install them
But XL doesnt need any external drivers. If u install fasboot an flashmode drivers from flashtool folder they should work; they are working for me and for anyone i know. U may also install SEUS and then connect phone. This way u dont need that drivers, but ofc what i have mentioned earlier should work.
Click to expand...
Click to collapse
Actually why don't you have a look at what the OP said,
"Thankyou so much, I only check my notifications so I really appreciate it"
I know what I'm doing here, if you don't have anything nice to say about it then DON'T say anything
Thanks..but still need you
Hi..Thank you so much for getting me back very soon.. I've successfully installed the driver with your your help. But, When I tried to root by using metachopper 1.3 my device did not reboot and start. Now, it just dead and really sad for this. I don't know what shall I do to get my phone back. Yes, I have 4.2.2 update in .ftf file with a flashtool. But, it does not work for me now.. Do you any experience to help me to solve my unwanted problem..Please..
FPThatea said:
Hi..Thank you so much for getting me back very soon.. I've successfully installed the driver with your your help. But, When I tried to root by using metachopper 1.3 my device did not reboot and start. Now, it just dead and really sad for this. I don't know what shall I do to get my phone back. Yes, I have 4.2.2 update in .ftf file with a flashtool. But, it does not work for me now.. Do you any experience to help me to solve my unwanted problem..Please..
Click to expand...
Click to collapse
you must boot your phone in fast boot mode. turn off your phone and hold down volume down when you connect it to the PC!
Use flashtool to flash ftf file. you'll need to place ftf file in C:/flashtool/firmwares
then select the right file for xperia L and just flash ftf.
in flash tool , select flash n then fastboot and then I'll ask you to put your phone in fast boot (use method mentioned above)
good luck !
I have tried all your methods
but I keep getting this error message "An error occurred during the installation of the device"
I am using windows xp sp3
please help

[Q] Fail to see my Nexus 5 on Win7

Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!
dushkin said:
Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!
Click to expand...
Click to collapse
Delete the device in device manager and then let it find it again.
Sent from my Nexus 5 using XDA Free mobile app
Thanks
If you mean to uninstall it, then I did it couple of times, and now again when the device was disconnected. Then I reconnected the device to the USB port, and scanned the deice manager for changes.
I got the same result - see attachement.
Delete then reboot both devices. Connect phone again. If same, delete device and reboot phone whilst still connected
If that fails, delete and use "universal naked driver"
Sent from my Nexus 5 using Tapatalk
dushkin said:
If you mean to uninstall it, then I did it couple of times, and now again when the device was disconnected. Then I reconnected the device to the USB port, and scanned the deice manager for changes.
I got the same result - see attachement.
Click to expand...
Click to collapse
Never seen that before. Your drivers obviously aren't set up right. Google 15 second adb drivers xda and use that to install the drivers. It'll also set up adb/fastboot which you may or may not need. It gives you the option
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Never seen that before. Your drivers obviously aren't set up right. Google 15 second adb drivers xda and use that to install the drivers. It'll also set up adb/fastboot which you may or may not need. It gives you the option
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
No need google.. Section 1b of the resources thread in my signature
Sent from my Nexus 5 using Tapatalk
Are you trying to use ADB mode? If so, and it's not recognizing the device, try using ADB Driver Installer. It worked for me.
dushkin said:
Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!
Click to expand...
Click to collapse
I had a similar issue. In order to get my Windows 7 laptop to recognize my N5, I first turned off USB Degugging then connected my N5 to the laptop. Then it showed up.
Sent from my SPH-L720
optimummind said:
I had a similar issue. In order to get my Windows 7 laptop to recognize my N5, I first turned off USB Degugging then connected my N5 to the laptop. Then it showed up.
Sent from my SPH-L720
Click to expand...
Click to collapse
It's supposed to work fine even with it on, at least it did when I had it on. Tested on Win 7, 8, 8.1 and 8.1U1 lol. I never had any issues with USB ever.
Or use Linux, it'll work right away..
It's not set to Camera (PTP) instead of Media Device (MTP) ?
Case Status
Guys.
Thank you all for your kind help.
I tried at least most of your advises - but there were no joy...
I think that the best I should do now is somehow clean up my system from old drivers and related installations.
So, taking aside the option of reinstalling windows, can you share with me some procedures that will enable me to get rid of all old drivers and files and to reach a state of a clean system, so I can then start reinstalling the drivers again?
Thanks a lot!
Well... here is the solution!!!!
https://www.topnotchtablets.com/FixUSBproblems
dushkin said:
Guys.
Thank you all for your kind help.
I tried at least most of your advises - but there were no joy...
I think that the best I should do now is somehow clean up my system from old drivers and related installations.
So, taking aside the option of reinstalling windows, can you share with me some procedures that will enable me to get rid of all old drivers and files and to reach a state of a clean system, so I can then start reinstalling the drivers again?
Thanks a lot!
Click to expand...
Click to collapse
I have similar problems, and as many times as ive tried to uninstall and reinstall i cannot access it from my 1 laptop. However, another laptop connects fine to it- even though i used the same drivers on both laptops. thats the only way i was able to get it to work for me.
dushkin said:
Hi Guys,
I had a rooted 4.4.2 device, when I got the the 4.4.3 upgrade and I think that from then I cannot see my device on my laptop.
(I am not sure of that because I CAN see it on my work desktop...)
Anyway, whatever I do - I get the following results:
1. Device manager shows me under the "Portable Devices" the brance F:\
2. When I try to install new ADB drivers, it tells me that "WPD fileSystem volume driver" is the best for me...
Storage usb connection setting is set to be MTP.
Meanwhile, I cannot see my nexus 5 files on my laptop
Please assist, Thanks!!!
Click to expand...
Click to collapse

Categories

Resources