i just flash the I9000JH1 to the phone ,i still havent install the kernel to the phone yet and it had boot the home page. and i follow the instruction to reflash again. with Odin3 after i will flashing the CSC and PDA file i unplug and restart the phone and i goes to android system recovery <2e> and i try to reboot but the power button not working....it said
sasung recovery utils
-for BML-
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
but i can use vol up and down to scroll up and down, but can select the item, the power button is not working.
down there had some yellow words
update media, please wait ...
update media, finished
#menu mode#
- Appling Multi-CSC...
installing Multi-CSC
that the only word it wrote, so wht can i do, is there had any method to reflash the thing??cuz the computer also cant recognize the phone, Thanks
hi ron
im just a noob but i have the same problem yesterday =)
u must flash an kaptivate kernel for a workung power button in the recovery menu!
http://forum.xda-developers.com/showthread.php?t=782413
but i cant even boot up the phone, it stuck in the recovery mode
ron671 said:
but i cant even boot up the phone, it stuck in the recovery mode
Click to expand...
Click to collapse
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
also, ADB commands should work while the phone is in recovery mode
Same Problem
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
rajendra82 said:
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
Click to expand...
Click to collapse
madetoservehim said:
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
Click to expand...
Click to collapse
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Response & Update
Have tried both of these options. Either way you do it, the phone still goes back into recovery mode. There was talk about using a custom kernel that would allow you to use the power button as the select button. Is there any way to use adb in recovery mode, so you can install the modified kernel, or reboot to download mode? If not, I started a thread on this question that can be found here as well:
rajendra82 said:
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Click to expand...
Click to collapse
Did you ever fix this? I'm stuck in recovery mode now and none of the button combinations work
I have the exact same problem. Have you had any luck figuring out how to get the phone to reboot?
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Pirateghost said:
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Click to expand...
Click to collapse
I am sure they can.
The 2e and 3e Download and Recovery modes were disabled by Samsung in later models of the SGS. It is not possible to get there using a combination of buttons etc.,
How to install the Download/Recovery Mode fix (3 Button Disabled SPL fix) http://forum.xda-developers.com/showthread.php?t=785201
There may be another method using an AnyWay JIG cable: which is a MicroB USB to Standard USB connector where I think one crosses pin 3 and 4 with a 301kOhm resister 1% tolerance, 1/4Watt. It would be best to search this forum for precise instructions.
Win for a dumb f%^k
well this isnt a good answer but i have a phone that went as discribed, no respose to three button, and unable to flash or get off the system reset screen on start up work on it for about 6 hour then left it when i came back i turned it on plug in the usb and CMD'ed adb reboot download and what did you know this time it worked? reset from that screen and it return to normal sooo.... um good luck and there is a way out just not shore what exactly it is
good for some
okey after fidling around i found my phone responded to adb ie download adb open a cmd line and typing adb reboot download. from there i just cycled the power hold down the power button a while and it rebooted to normal working order. though i still cant get 3 button even with flashing the fix so no hacking for me hope this helps
I'm using the Samsung Fascinate, i500 and i got stuck on the same screen too!!! i just double tapped the home button and rebooted the phone
I was able to get out of a 2e loop by running adb reboot download with odin open, then reflashed from there. Went through the same process twice since cognition 2.3b8 does not want to install on my phone. had no problem with b7 install.
Instructions were not that great. But Thanks -I figured it out and am back up.
Same problem here, cant make my phone go to download mode, ok or select key "power button" not working.
already tried the 2 methods before and they not working, (combination of keys)
Vibrant stuck in android system recovery 2e
I know this is not exact help but i just accidentally found myself into download mode after more key combo fiddling. I believe the last combo that got me in was either holding UP + POWER or just UP at the precise moment the screen goes black to reboot. This is after quite a few boot cycles so trial and error seemed to pull it off.
I'd test it again to be more sure but i don't want to risk being stuck again at this point. But I figured i'd speak up now, because i don't plan to have 2e there ever again.
i need to root my phone so i can download rom manager so i can flash my first rom but its not kicking into recovery mode. im holding the power and volume keys at the same time. is there any other way?
1. Install android toolkit on computer
2. Install captivate drivers
3. Settings --> Enable USB debugging
4. Connect phone to computer
5. Open command prompt
6. Issue the command adb reboot recovery
Plus, u don't need ROM manager, nor root to do any of this stuff. Read the stickys on page 1 to get started on how to install ROMs.
1 turn off phone. wait for the vibrate to tell you its off!
2 hold both volume buttons
3 press the power button
4 DONT let the volume go until the screen comes on!
Gold
Trusselo said:
1 turn off phone. wait for the vibrate to tell you its off!
2 hold both volume buttons
3 press the power button
4 DONT let the volume go until the screen comes on!
Gold
Click to expand...
Click to collapse
tried that, just flashes att screen
jamezz23 said:
tried that, just flashes att screen
Click to expand...
Click to collapse
Let power go when you see the ATT screen, keep holding up+down vol
Mine just did the same thing tonight after using ODIN for the first time. Prior to ODIN, I could use the volume keys + power. After ODIN, the AT&T screen just flashes and then boots up.
I found other experiencing the same issue as me. I tried the following and it worked. However, I still cannot get the volume + power button trick to work anymore.
http://forum.xda-developers.com/showthread.php?t=739304
jamezz23 said:
tried that, just flashes att screen
Click to expand...
Click to collapse
Have a look for the 3buttonFix.zip
jamezz23 said:
i need to root my phone so i can download rom manager so i can flash my first rom but its not kicking into recovery mode. im holding the power and volume keys at the same time. is there any other way?
Click to expand...
Click to collapse
Not all build numbers can use the 3 button fix to enter recovery mode.
Look underneath your battery compartment to find your build number (1007, 1008, etc.). Then do a search to find out how to enter the recovery mode for your particular phone.
You may need to get yourself a usb jig.
phone :
htc one s
rooted
cyanogenmod
CWM recovery v6.0.5.1
so the story is :
i forgot to charge my phone last night and it ran out of battery and died. when i plug it into charger or PC, it immediately boots into CWM without pressing anything and wont enter anything else. it also doesnt seem to charge in CWM and when i try to power it off, it simply goes into CWM again. simply put, i cant turn it off or charge it. phone was working perfectily fine before.
what i'm trying to do now is trying to boot it into bootloader and try to charge with fastboot script (i did it before) so i can get enough voltage to boot it into the OS. but the phone refuses to enter bootloader by any means and simply goes back into CWM.
tried holding the vol down + power button for 10 secs till it restarts, release power and hold it again while keeping the vol down pressed. but it still enter CWM (usually this is what i do to enter bootloader)
i cant restart to bootloader from CWM either (any buttons to power off, restart, boot to anywhere from CWM simply brings it back to CWM)
holding only the power button till it restarts also brings it back to CWM.
holding the vol down + power button without releasing them simply gives me screen flicker and it loops that way. i assume that made the phone soft reset repeatedly?
holding the vol down + power and releasing power once it resets and tapping power also brings it back to CWM.
here's a simple video showing the phone : youtu.be/PDvskMZIHAM
any help would be appreciated. thanks.
solved : as i noticed that the phone charging led turns on whenever i hold the power button. i tried holding the power button for god knows how long while plugged in. i released it once my finger was tired and cant hold it anymore and it boots into cyanogenmod.
Hi,
A7 2018 (SM-A750F) vanilla
I am trying to flash TWRP on my phone using Odin: entered recovery (VolUp+Power), choose Bootloader to enter download mode, blue download screen is visible, flashed TWRP via Odin, Odin reports success.
But then, the only option to leave download mode is VolDown+Power which results in a normal boot which in turn restores the default recovery.
So what am i doing wrong? How can I exit download mode straight into recovery?
There is many tutorials on the web for A7 2018 but most seem to use different key-combi's that don't work on my phone.
When you're in download mode keep pressing all 3 buttons ( volume up + volume down + power), around 7 seconds. When the screen will go black, immediately remove your hold from " volume down" button and you will be left with two buttons. volume up and power which are used to go in recovery, when you'll hear a vibration. Remove your hold from all buttons and you'll find yourself in recovery mode
In simple steps (They're Same) :-
1. Press all Available Buttons (VOLUME +, - AND POWER BUTTON) For Around 7 Seconds
2. When Screen Goes Black immediately Remove Finger From Volume Down Button
3. Don't remove fingers from Volume up and power button ( keep hold onto them)
4. You'll hear a vibration
5. Remove your hold from those buttons too
6. Congratulations, you're into recovery mode
Yes, that worked.
However on my phone the combi to exit Download is Down + Power and for Recovery is Up + Power.
my samsung a7 2018 got stuck on download mode after i tried to download font chnger through magisk and then it asked me to reboot and now it is stuck download mode and it a loop
I'm kinda stuck here, praticing how to go right to TWRP from Download Mode. I did the Volume Down + Power to Reboot, then Volume Up + Power Straight away when the screen turns off.
The trouble is, there is a root warning that requires me to release all buttons and press Power to continue, which messes up going to Recovery. I'm on S9080, any tips would be apperciated, trying to upgrade to Android 13
In order to go to TWRP:
a) Power off you phone, i.e. if you are in Download Mode you go for "reboot" and then you power down your phone manually
b) if you want to somehow go "straigt" from Download Mode to TWRP (e.g. because you are stuck in a boot loop, like me) you can try the following:
1) You are in Downlod mode
2) You attach (or keep attached) the USB cable!
3) You tell Download mode to reboot
4) You wait for the moment when you phone has powered down during the reboot cycle (the phone should vibrate for a sec)
5) Then you press the home + volume up button.
Note: It is important that during step 5 the USB cable is connected, because starting TWRP needs *three* things: USB attached + Home button + Volume up
Maybe this works.