Related
____________________________________Solved, thanks for all who offered help.___________________________________
Hi All, I have just flashed the RemICS ROM 1.3 and i have followed the set of directions for Gingerbread users, which I previously was. The installation had been successful until I did the final Reboot, where it loops back into the Recovery mode even after numerous of re-flash and reboots. I'm pretty sure the ROM is installed, yet it would not load into the OS, thoughts? Thanks everyone in Advance.
http://forum.xda-developers.com/showthread.php?t=1613523 I had the option C installed initially, for everyone's info.
________________________________________________Solution________________________________________________
Finally got my ICS working now. Can't thank you enough for qkster Heimdall One Click Gingerbread ROM.
For everyone's reference, the following is what I've done;
1) Flashed the Heimdall One Click GB Stock rom, a big thanks to qkster,
2) Flashed the CWM Recovery just under the same thread,
3) Flashed the RemICS rom with factory wipe and formatting data, system and cache, again after reboot.
4) >Bootlooped at the SAMSUNG screen,
5) Followed the solution of bootlooping under the RemICS thread and flashed Heimdall GB Stock again,
6) Flashed Clockworkmod again,
7) Installed RemICS rom again (Step 3) & WORKING LIKE A CHARM NOW!
I suspect my initial problem was caused by internal conflicts between the Rooted ROM and ICS, yet it is not evident nor I'm experienced to make such conclusion. Anyway, glad that my Infuse is finally able to run on Ice Cream Sandwich and I really dont care about what had caused the problem prior.
Big Thanks to rkkaranrk and qkster.
Post sent to dev thread of this ROM, just hang tough, tell the storm troopers arrive....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Do u have the GB boot loaders ? If not flash them......will solve ur problem.
Sent from my SGH-I997 using Tapatalk 2
rkkaranrk said:
Do u have the GB boot loaders ? If not flash them......will solve ur problem.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Gb bootloaders would not cause this problem...it only causes rainbow...I've had this happen to me countless times when I was porting Roms back when I had an infuse...I just came to the conclusion the the ics recovery is buggy and is borked easily
The fix, flash back to stock via heimdal or Odin, then get cwm recovery and flash the Rom using gingerbread instructions (double flash) (unless you flash the ics kernel...in that case one flash)
If you want detailed instructions on flashing or getting gb bootloaders (in case you have rainbow recovery) then check out my infinitum port thread (in my signature) at the bottem of the OP you will find some good instructions...I wouldn't reccomend flashing it though as it is old and doesn't have the latest fixes...but the flashing instructions are still good
Sent from my HTC PH39100 using Tapatalk 2
I had faced this same issue last night when I was trying to flash REM ics on my friends phone and it don't have the GB boot loaders I tried to flash the recovery from the OP and after flashing recvery I was not able to RAF anything the fonts were so tiny and were in pink color.
After all this I flashed it back to lb3 thanks to Scott and from there I flashed it again and this time lost recovery was not able get the phone to recovery, So finally I decided to flash the GB BL with heimdall (thanks to qkster) flashed stock one more time with BL ticked and the REM ICS, All good.
Sent from my SGH-I997 using Tapatalk 2
rkkaranrk said:
I had faced this same issue last night when I was trying to flash REM ics on my friends phone and it don't have the GB boot loaders I tried to flash the recovery from the OP and after flashing recvery I was not able to RAF anything the fonts were so tiny and were in pink color.
After all this I flashed it back to lb3 thanks to Scott and from there I flashed it again and this time lost recovery was not able get the phone to recovery, So finally I decided to flash the GB BL with heimdall (thanks to qkster) flashed stock one more time with BL ticked and the REM ICS, All good.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
The bootloaders fixed the rainbow recovery, what fixed your whole problem was that you flashed stock...so you pretty much killed two birds with one stone, you fixed your rainbows and you fixed your soft brick...
The pink recovery you referred to is known as rainbow recovery
Sent from my HTC PH39100 using Tapatalk 2
Mate u missed the part i said i flashed stock twice first time with out the BL and then with the BL, When i flashed stock without the BL and from there when i flashed REM i lost recovery so and flashed again with the BL this solved.
I had read all aver that BL does not mess with flashing only gives u messed recovery on ICS and rainbow boot but i don't know how this worked for my friends phone.
Edit: i know how rainbow recovery looks like but the fonts are still in blue color but in this case the blue fonts were pink in color and were too small if the normal size of the font say 10 then the size in this recovery was like 2/3.
rkkaranrk said:
I had faced this same issue last night when I was trying to flash REM ics on my friends phone and it don't have the GB boot loaders I tried to flash the recovery from the OP and after flashing recvery I was not able to RAF anything the fonts were so tiny and were in pink color.
After all this I flashed it back to lb3 thanks to Scott and from there I flashed it again and this time lost recovery was not able get the phone to recovery, So finally I decided to flash the GB BL with heimdall (thanks to qkster) flashed stock one more time with BL ticked and the REM ICS, All good.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Yes i have flashed the original stock gingerbread (the one listed in the OP) back onto my infuse last night. The phone is working flawlessly at this moment under the stock GB.
And the ICS Rom was flashed twice everything worked, cache cleared, factory reset, no rainbow, and the only problem was recovery looping. Im considering reflashing the rem ICS rom sometime soon but i doubt I'd see any difference, any chance i can get ICS working? Thanks for all the above replies
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
There is no reason for it not to work if done properly u will boot in to a new world.
Sent from my SGH-I997 using Tapatalk 2
RemICS kernal question
I am currently using version 1.3 on my infuse. I have noticed that the past couple of days that the phone seems to be slowing down and doing soft reboots every once in awhile. I have gone through and deleted a bunch of apps and moved some to my sdcard and it has gotten faster, however I still have some slow downs and reboots, especially when coming back to the homescreen after exiting an app (It seems to take a few seconds to redraw the homescreen) or if an app locks up. I also have RemICS version 1.3.1 on my Captivate and it has a different kernel (Devil Kernel). I was wondering if there was a version of this kernel that would work with the Infuse as my Captivate seems to be rock-steady and fast. I have not overclocked or messed with the memory settings on the Infuse, but I have noticed that no matter what Rom I use on it (even stock Gingerbread loaded by ATT repair center), it seems to slow down and mess up over time. RemICS so far has seemed to last the longest and I would like to keep it going smoothly. Any suggestions would be extremely helpful. Thanks!
Chris Veverka
[email protected]
cx831 said:
Hi All, I have just flashed the RemICS ROM 1.3 and i have followed the set of directions for Gingerbread users, which I previously was. The installation had been successful until I did the final Reboot, where it loops back into the Recovery mode even after numerous of re-flash and reboots. I'm pretty sure the ROM is installed, yet it would not load into the OS, thoughts? Thanks everyone in Advance.
http://forum.xda-developers.com/showthread.php?t=1613523 I had the option C installed initially, for everyone's info.
Click to expand...
Click to collapse
yes it happens with me when i flash ics over gb and after every thing phone just struck up in blue recovery it happens coz some previous system files sometimes not completely deleted, dont worry just do following as what i do.
search and download infuse toolkit v1.10 and when u got in bootloop in cwm just flash this toolkit from cwm and follow the instructions till option full wipe or complete wipe after that it will again boot up in cwm recovery now wipe cach system and again install ur rom.
cx831 said:
Yes i have flashed the original stock gingerbread (the one listed in the OP) back onto my infuse last night. The phone is working flawlessly at this moment under the stock GB.
And the ICS Rom was flashed twice everything worked, cache cleared, factory reset, no rainbow, and the only problem was recovery looping. Im considering reflashing the rem ICS rom sometime soon but i doubt I'd see any difference, any chance i can get ICS working? Thanks for all the above replies
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
be positive, you can get ICS running in no time. follow our directions and you shouldnt come up with any complications
1. wipe data, cache, and dalvik
2. flash remICS
3. after reboot you will be stucked at samsung. pull out the battery and place it back in
4. enter recovery with 3 finger combo (vol up & down, and power). release power when samsung appears
5. flash rom again, and reboot
hopefully you should now see your phone booting up into ICS
http://forum.xda-developers.com/showthread.php?t=1783899
rkkaranrk said:
There is no reason for it not to work if done properly u will boot in to a new world.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
babamanan said:
yes it happens with me when i flash ics over gb and after every thing phone just struck up in blue recovery it happens coz some previous system files sometimes not completely deleted, dont worry just do following as what i do.
search and download infuse toolkit v1.10 and when u got in bootloop in cwm just flash this toolkit from cwm and follow the instructions till option full wipe or complete wipe after that it will again boot up in cwm recovery now wipe cach system and again install ur rom.
Click to expand...
Click to collapse
Thanks for the tip and I have made 3 more attempts today, which all failed. I have returned to the stock rooted GB as mentioned at the initial thread each time to return to a working OS. I have recorded my last attempt of the day throughout the duration, including the method you have mentioned. I'll list what I have done in short below;
youtube.com/watch?v=RGCEkRVlHog (Unable to embed links, my apologies for any inconvenient)
1. Factory Format, Wipe Cache, Wipe Delvik Cache,
2. Flash rom from internal SD,
3. Advance > Reboot Recovery,
4. Flash again after re-enter Recovery,
5. Boot-looped as expected, thus flashed Infuse Toolkit v1.1,
6. Wipe Cache and Complete Wipe,
7. Quit and automatic reboot,
8 -Stuck at Cyanegen Mod Screen, wont enter Recovery Mod again-, no matter what i do. I tried pulling battery out and reboot into recovery, stuck anyhow.
Then I entered Odin and flashed stock GB back and my phone is working fine. Please point out any missing steps or mistakes to the installation. I suppose it's a conflict with the internal SD rather than system error, welcome to any suggestions. Again, thanks for all the replies so far. Anything is appreciated!
ps: I will give other Ice Cream Sandwich ROMs a shot this weekend, hope the above would not occur on the other roms. :/
Don't use the reboot option from recovery and did u tried downloading the ROM file again.
Sent from my SGH-I997 using Tapatalk 2
Sorry for the late update, but no luck for any other ICS roms available for infuse. All ended up the same, blue recovery bootlooped.
I'm wondering if there's any way that I can wipe all the data, including the stuff on internal SD like an ultimate factory reset with only the running ROM left so I can do a clean ICS flash? Thanks all.
cx831 said:
Sorry for the late update, but no luck for any other ICS roms available for infuse. All ended up the same, blue recovery bootlooped.
I'm wondering if there's any way that I can wipe all the data, including the stuff on internal SD like an ultimate factory reset with only the running ROM left so I can do a clean ICS flash? Thanks all.
Click to expand...
Click to collapse
It is possible that reboot recovery while in cwm got you in this recovery loop.
There may be a misc recovery img created.
You have to delete that misc with a prepare cwm-flashable script.
On the infuse, mounting usb in cwm doesn't work.
If you can get at it in adb, this command may work:
C:\> adb shell erase_image misc
You will have better luck in factory/data reset in cwm.
Put the phone in DL mode.
Odin or Heimdall back to stock with repartition and start over.
This time around, remember not to reboot into recovery while in cwm
I had the OP's exact issue when I upgraded from CM7 to remics last week. I was running froyo bootloaders and LB's CM7 (http://forum.xda-developers.com/showthread.php?t=1195525) with whatever kernel came with that (it had blue CWM).
I followed the instructions for "coming from Gingerbread" in the original remics thread (before it was updated this week) and I ran into OP's *exact* problem with looping back into recovery. I got on the #infuse4g IRC and got help from Aerema(sp?) and entropy. I learned some new things and tried everything they suggested (a lot of which I'm reading in this thread)... but none worked for me.
To get to the point, in the end... and I know this doesn't seem to make sense, but what worked for me was using Odin to "return to stock", then flashing the kernel from the remics package and flashing remics.
I had been using qkster's Heimdall OneClick return-to-stock (http://forum.xda-developers.com/showthread.php?t=1524081). Heimdall always worked and didn't report any problems. I even used heimdall command line interface when I upgraded from froyo to gb bootloaders.
To this day, I don't understand why using Odin return-to-stock (http://forum.xda-developers.com/showthread.php?t=1705260) got me out of the recovery loop.
I *think* my upgrade path went like this.
Starting with CM7Kang/froyo BL
1) download remics1.3.zip, followed instructions exactly & flashed remics1.3.zip from blue CWM.
2) rebooted, ROM worked just fine but had rainbow recovery.
3) attempted qkster's heimdall OneClick GB BL upgrade (update bootloader checkbox). It failed.
4) updated to GB bootloader using heimdall command line (http://forum.xda-developers.com/showpost.php?p=24901128&postcount=3)
5) ** recovery loop ** seemingly tried everything from double-flashing kernel-only using heimdall command line to reverting back to stock (heimdall), format /system, Infuse Toolkit, etc and so on.
6) used ODIN return-to-stock and from there the upgrade went perfectly.
I, too, would like to express my gratitude to bradman117 and everyone else involved in making this ROM available to the general public. I'm really liking it. Nice to have ICS on a > 1 yr old device. Thanks to those who still visit the #infuse4g IRC chan as well.
TL;DR - I had to use the Odin return-to-stock to fix recovery looping, even though Heimdall return-to-stock appeared to be doing everything correctly.
Problem Solved.
qkster said:
It is possible that reboot recovery while in cwm got you in this recovery loop.
There may be a misc recovery img created.
You have to delete that misc with a prepare cwm-flashable script.
On the infuse, mounting usb in cwm doesn't work.
If you can get at it in adb, this command may work:
C:\> adb shell erase_image misc
You will have better luck in factory/data reset in cwm.
Put the phone in DL mode.
Odin or Heimdall back to stock with repartition and start over.
This time around, remember not to reboot into recovery while in cwm
Click to expand...
Click to collapse
Finally got my ICS working now. Can't thank you enough for qkster Heimdall One Click Gingerbread ROM:good::good::good:.
For everyone's reference, the following is what I've done;
1) Flashed the Heimdall One Click GB Stock rom, a big thanks to qkster,
2) Flashed the CWM Recovery just under the same thread,
3) Flashed the RemICS rom with factory wipe and formatting data, system and cache, again after reboot.
4) >Bootlooped at the SAMSUNG screen,
5) Followed the solution of bootlooping under the RemICS thread and flashed Heimdall GB Stock again,
6) Flashed Clockworkmod again,
7) Installed RemICS rom again (Step 3) & WORKING LIKE A CHARM NOW!
I suspect my initial problem was caused by internal conflicts between the Rooted ROM and ICS, yet it is not evident nor I'm experienced to make such conclusion. Anyway, glad that my Infuse is finally able to run on Ice Cream Sandwich and I really dont care about what had caused the problem prior.
Big Thanks to rkkaranrk and qkster. :laugh:
I've been using liquid smooth since rc3 and have had no issues upgrading until the most current version--rc7. I downloaded the ROM several times to ensure there wasn't any issues with my download, but I encounter the same issue after a clean flash which is the inability to get past the black screen after the Samsung logo. I've performed factory/data resets prior to flashing rc7 but to no avail. I even flashed the latest cm10 nightly build with no issues. I've restored my rc5 nandroid but really want rc7. Any suggestions will be appreciated.
BTW, I posted this here because I'm not allowed to post in the liquid smooth developers forum
try formatting system after the data wipe, then flash rc7.
dmalikyar said:
I've been using liquid smooth since rc3 and have had no issues upgrading until the most current version--rc7. I downloaded the ROM several times to ensure there wasn't any issues with my download, but I encounter the same issue after a clean flash which is the inability to get past the black screen after the Samsung logo. I've performed factory/data resets prior to flashing rc7 but to no avail. I even flashed the latest cm10 nightly build with no issues. I've restored my rc5 nandroid but really want rc7. Any suggestions will be appreciated.
BTW, I posted this here because I'm not allowed to post in the liquid smooth developers forum
Click to expand...
Click to collapse
wipe before flashing, and after flashing again just to make sure, and if that doesn't work, you can always odin back to stock rooted and drop the rc7 files back on your sd card (or unless you drop them on your external sd card, you can flash it immediately after getting the pass notification from odin)
droidstyle said:
try formatting system after the data wipe, then flash rc7.
Click to expand...
Click to collapse
Tried that and it made no difference.
dmalikyar said:
Tried that and it made no difference.
Click to expand...
Click to collapse
try using odin......just remember after you odin back to the root66 image, you have to reinstall CWM and doesn't hurt to make sure ur bootloader is unlocked using the 1.2 version of the ez unlock then flash again
digitalsynner85 said:
wipe before flashing, and after flashing again just to make sure, and if that doesn't work, you can always odin back to stock rooted and drop the rc7 files back on your sd card (or unless you drop them on your external sd card, you can flash it immediately after getting the pass notification from odin)
Click to expand...
Click to collapse
I'll try the Odin route. I'll go back to root66 and try it from there.
dmalikyar said:
I'll try the Odin route. I'll go back to root66 and try it from there.
Click to expand...
Click to collapse
i was having issues with nfc not working and a few other items that other people weren't having and decided that after approximately 500 different flashes that something i flashed for nfc fixes on jellybean or ics roms that didn't support the libs for nfc could've borked something up and just wasn't noticeable until i went to an aosp based rom, and sure enough it worked, so if anything you'll have a nice crispy fresh stock device to play with again if the same issue shows up w/ liquid
digitalsynner85 said:
i was having issues with nfc not working and a few other items that other people weren't having and decided that after approximately 500 different flashes that something i flashed for nfc fixes on jellybean or ics roms that didn't support the libs for nfc could've borked something up and just wasn't noticeable until i went to an aosp based rom, and sure enough it worked, so if anything you'll have a nice crispy fresh stock device to play with again if the same issue shows up w/ liquid
Click to expand...
Click to collapse
now the truth comes out...if you would of gave this information from the get go I too would of said to simply flash back to stock and start fresh. its all in the details folks.
imklaho your
droidstyle said:
now the truth comes out...if you would of gave this information from the get go I too would of said to simply flash back to stock and start fresh. its all in the details folks.
Click to expand...
Click to collapse
I Odin'd root66 and installed the ez unlocker as well as clockworkmod via rom manager. I went into recovery and wiped data/factory reset/wiped cache/wiped dalvik cache. I then installed LS RC7. It went through the installation and indicated that it completed. After I reboot, I briefly see the Samsung logo, then the screen is completely black. No boot animation. I let it set for over 20 mins. and nothing happens. This is absolutely bizarre. I've tried 3 different downloads. I'm at a loss. Is there a way to convert the zip to an img and odin it on?
KT747-Kernel-AOSP-JB-VZW-10-31-2012.zip
I'm still unable to install RC7. However, when I try the KT747 Kernel, I get the same symptoms (black screen after flash). I'm wondering if the symptoms are related. Anyone have this issue flashing KT747?
dmalikyar said:
I'm still unable to install RC7. However, when I try the KT747 Kernel, I get the same symptoms (black screen after flash). I'm wondering if the symptoms are related. Anyone have this issue flashing KT747?
Click to expand...
Click to collapse
I've had a similar situation. I flashed RC7 and afterwards it booted to the liquid not animation and afterwards just went black, I had never experienced that before so I left it for 10 mins and the hit the power button and got no response. I finally did a battery pull and then booted into CWM and fixed permissions, yet again, and it finally booted. I don't know if this will help you any but I hope so. Honestly the way it boots and then stops and starts over reminds me of kexec. Also after having this problem on RC7 I decided to flash PA 2.52 and had the same issue with it and had to do the same steps to make it boot the first time. I am going to odin completely back to stock tonight because I am experiencing a crap load of issues after I flashed RC7.
And yes I clean flash everything, even when I just go to a newer release of what I'm currently running.
Sent by one of my many Anthromorphic Personifications
shangrila500 said:
I've had a similar situation. I flashed RC7 and afterwards it booted to the liquid not animation and afterwards just went black, I had never experienced that before so I left it for 10 mins and the hit the power button and got no response. I finally did a battery pull and then booted into CWM and fixed permissions, yet again, and it finally booted. I don't know if this will help you any but I hope so. Honestly the way it boots and then stops and starts over reminds me of kexec. Also after having this problem on RC7 I decided to flash PA 2.52 and had the same issue with it and had to do the same steps to make it boot the first time. I am going to odin completely back to stock tonight because I am experiencing a crap load of issues after I flashed RC7.
And yes I clean flash everything, even when I just go to a newer release of what I'm currently running.
Sent by one of my many Anthromorphic Personifications
Click to expand...
Click to collapse
Thanks for the tip. I did as you instructed by fixing the permissions after a failed boot but to no avail. I've gone through the process of odin and root66 and then installing ez unlock and CWM but it just won't boot into RC7. I had no issues with RC3 and RC5. I'm at a loss.
dmalikyar said:
Thanks for the tip. I did as you instructed by fixing the permissions after a failed boot but to no avail. I've gone through the process of odin and root66 and then installing ez unlock and CWM but it just won't boot into RC7. I had no issues with RC3 and RC5. I'm at a loss.
Click to expand...
Click to collapse
Have you tried TWRP recovery as opposed to CWM?
shangrila500 said:
Have you tried TWRP recovery as opposed to CWM?
Click to expand...
Click to collapse
I installed twrp and I really like the interface but it didn't resolve the issue of flashing RC7. I've installed paranoid android and can install aokp and cm10 with no problems. I can't install RC7 or slim beans.
Cannot install Liquid Smooth
Yah the guy at Liquid Smooth is kind of a butt wipe. I understand the desire to have a screen capture and a logcat but if the user can't even install the flash how is a screen capture going to help. Maybe a logcat could. But either way why be an A hole about it.
I am having the same issue, I even formatted my system and still LiquidSmooth says it flashed but it just refuses to boot. I have used Odin to install the stock JB 4.1.1 from Poland but I still get the same problem. I do believe it has something to do with having tried CaponMod4NSS_3.0 the day before. Still I would think formatting the system would resolve that.
Any ideas? I will try to install the Samsung 4.1 ROM with Odin to see if that helps.
Ok. I just flashed CM10 stable on my SGS2 Skyrocket, and LOVE it, so I wanted to give it a shot on my Xoom (MZ604). I was having problems getting into CWM, due to the recovery image being overwritten (I was running stock, unrooted 4.1.2 until tonight).
I got that all sorted by flashing the stock, rooted ROM found here, and that was humming away fine. Rebooted into the bootloader, and flashed the CWM linked here. Rebooted into that version of CWM, only to find that I can't access my external SD card where I have the CM10 image stored.
Flashed back to the original CWM I had when first rooting, and flashed CM10. Flash went well, rebooted, and now I'm stuck at the CM load screen. The one with the circle going around and around.
I thought maybe something was wrong with my tablet, so I rebooted into CWM again, and reflashed the stock, rooted version, and it was fine. Flashed back over to CM10, and the same thing. Stuck at the load screen,. It has been there for at least 30 minutes.
I did wipe the cache and Dalvik before every flash of both ROMs.
Any ideas anyone? TIA
EDIT: Is it possible to put the CM10 image on internal SD card and flash it from there? I had assumed that wouldn't work because of formatting and the like, but if it's on /sdcard and not /system...
Edit 2: Just did a factory reset(can't believe I forgot this!!), and all is well now. Mods, please lock this thread. Thank you
My father has a Skyrocket and he didn't like how slow and clunky it was from stock, so I decided to flash a ROM that I knew well and would make his phone a more enjoyable experience. I flashed TWRP, put Carbon ROM (latest nightly) and the latest 4.3 Gapps on his SD Card, and flashed. Keep in mind I wiped data, dalvik, cache, and system before I flashed anything. Everything went well, phone booted, I got it configured and installed most of the apps he likes to use and it was good to go. A while earlier, I rebooted the phone normally, not into recovery or bootloader, just a normal reboot. The phone shut off, buzzed, and wouldn't come back to life. Pulling battery, button combinations, it would only go to the Battery Icon screen. PC wouldn't recognize, etc. Managed to get it into Odin, flashed stock, it hung at Samsung screen so I had to wipe data in stock recovery. It is running fine now on stock 4.1.2 but I'm really scratching my head at why a simple reboot soft bricked his phone. Used TWRP 2.6.0.0 btw.
That recovery is old to begin with. Second, 4.3 isn't the most stable right now
Sent from my HTC One using Tapatalk 4
Yea, use twrp 2.6.3.0. If you want 4.3 cm 10.2 is working pretty well right now.
Agreed, this is 100% because you used TWRP 2.6.0.0. 2.6.0.3 is the minimum required version for and 4.3 based ROM, and as mentioned 2.6.3.0 is the latest official release.
Thank you all very much. It didn't even cross my mind that the recovery version could be the issue. I guess I might try again later on the newest TWRP.
Sent from my MB886 using xda app-developers app
I have recently had a similar issue with a 4.3 ROM, and I am using 2.6.0.3. Only I could get into recovery after a battery pull and button combo. I just kept following the same steps of wiping flashing and it eventually it took and is running fine now(just jinxed myself I am sure).
So I rooted my brother's infuse 4G because it was slow as sin and needed A. a data/cache wipe and B, I wanted to give him Jellybean
I followed all the instructions I could; rooted, installed the modded 3e (or thought I did), got a CWM installed afterwards, and then set about installing first CM9 (as the Jellybean ROM post says I should) followed by the actual ROM and its Gapps. Well, I installed CM9 (although it seemed to take all of 30 seconds, rather fast...) when I tried to wipe data/factory reset, CWM froze. I rebooted and from then on I had it softbricked. Stuck booting at the samsung logo, and when I tried to return to the recovery, the recovery was a garbled mess that looked like a scrambled TV channel. I used Heimdall and did the one-click reset to stock, and here I am. The phone boots to stock just fine, but my recovery is still completely boned.
Do I re-root? How do I install CWM again without being able to install 3e? (can't install 3e without a working recovery in the first place, after all..)
One anomaly of note - when I was going about all this, booting the phone into recovery always got me 3e, even after installing CWM. I had to manually install CWM by using an update.zip and "reinstall packages" every time I wanted to use CWM. ROM manager would boot me to CWM, but it took several reboots and a flashable CWM zip before I could even get CWM installed in the first place - ROM manager refused to do it the easy way.
What did I do wrong, and more importantly, how do I get back on track? What do I do to put a fixed recovery back on this thing? Odin? ADB?
Today was the first time I ever used Heimdall, I've been a fair weather flasher since the beginning, I've never had to ADB or Odin.
It sounds like you didn't install cwm recovery properly, but I'm not sure I've never ran into this problem before. If you go here
http://forum.xda-developers.com/showthread.php?t=1524081 and carefully read over the first and second post you should end up with gb and red cwm recovery. The way I've done it was to put the phone in dl mode and flash the first package (the stock gingerbread att rom). After it is installed and booted up, I then power it off and go back into dl mode. Then flash the second package, which is just the kernel and red cwm recovery, (be patient because it takes awhile). Once that is done then go into recovery and wipe data/factory reset, wipe dalvik cache, wipe system, and install cm9. I think it only installs the kernel and recovery the first installation after formatting and creating the partitions, but after its done you have to go through the menus and tell it to reboot. After it reboots it will be stuck at the cyanogenmod galaxy s logo, so you will have to go into recovery once more. When you're there you should have blue cwm (only continue if you do) and install jb, without actually having to install the full cm9. When you navigate to which ever jb rom you want to install, a prompt will appear stating that there is incompatible partition layout and to confirm installation you will have to reselect the jb zip again to install. It will flash pretty quick because at this point its doing the same thing as when you went from gb to cm9 and only installs the kernel, recovery, and reformat/creates the partitions, (I think). It will reboot on its own but it will take you back into recovery. At this point all you have to do is navigate to the same jb zip you want to install and flash it, followed by gapps, and then reboot system. This process has worked for me but I highly recommend reading and following the instructions given in the post above.
Use goo.I'm app. Also you need to flash GB bootloaders in Odin . is recovery all colorful? If you see recovery fine just get goo app on play store and install a recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I would go the ODIN route, I have bricked so many times because i try to make the impossible possible. Just search for a already rooted pda,mdr file. I skipped the cm9 part idk if that would make things better or not but as my post says im a risk-taker
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
UnhoIy said:
One thing I'd like to point out, flashing to ICS from GB requires 2 flashes. First flash sets the new partitions. You reboot and pull the battery, then boot back into recovery and reflash with the gapps.
That was the first problem I saw, and now commenting while on the Nexus I can't see the OP so that's all I'll comment on.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
but if don't have any problems i'm good right or should i go back and do it
MajorLeagueROM said:
but if don't have any problems i'm good right or should i go back and do it
Click to expand...
Click to collapse
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
UnhoIy said:
I've never skipped ICS and gone straight to JB like you, that's risk I've yet taken. I guess if you've had no problem then you're good, but I've gone back to stock and to JB at least 12 times now and used the same process every time without a hitch. In the case of OPs problem, I would just go back to stock and try again. Although I always go back to 2.2 stock...
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
MajorLeagueROM said:
I'll just do it tonight then maybe my phone will run better, i thought i'd be a waste of time. thanks for the info
Click to expand...
Click to collapse
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
UnhoIy said:
Lucky me, I get to go back to stock tonight for soft-bricking for the first time having this phone. It's what I get for trying to port a ROM with only a nights worth of research.
Oh well.
Click to expand...
Click to collapse
lol it happens to the best of us