Database Info

cachemate

has anybody been able to get any of the current builds to work? the only version i can get to work on my hero is the 2.5.7 and currently the newest is 2.5.9.

i am using 2.5.8
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

2.5.9 working for me
I'm on Fresh 2.0d

doesn't work for me, just sits there on the 'clearing cache' screen forever.

smoother2010 said:
doesn't work for me, just sits there on the 'clearing cache' screen forever.
Click to expand...
Click to collapse
at any point has it asked for su permission?
maybe lack of permission?

mountaindont said:
at any point has it asked for su permission?
maybe lack of permission?
Click to expand...
Click to collapse
no it did not ask for permission, it did the first time i used it though.

smoother2010 said:
no it did not ask for permission, it did the first time i used it though.
Click to expand...
Click to collapse
troubleshooting:
check su to see if permission granted. in retrospect, su prolly isnt the issue; i ran cm on a nonrooted hero and it started and just disappeared. if its stuck at "clearing" then its an internal issue.
fresh wipe and reinstall of your current rom. its VERY possible your rom is the issue.
reinstall of cm
fyi, the biggest difference between the older build and the latest is the power clear (right?) maybe the older version is all you need. keep in mind the older version still clears all the basics in every other build. most cm updates are modre apps added to the list, and lgtely the power clear. cant remember how long ago the widget was released

works for me ... i think it says clear cache finish ... all roms it worked but i think i was on fresh and it sayd 1mb freed idk if i was using a diff one or not

[ROM-DEV] my WIP roms cm6.1.1/miui

These 2 roms are far from finished but this will give you guys a chance to play around a bit and possibily offer any insight on possible fixes
Both of these roms include my 1.51 ghz undervolted kernel
Which I have been getting stellar battery life from
Installation
​
place the rom anwhere on your sdcard (preferably the root)
boot into clockwork recovery turn off phone hold down voldown+power
wipe data and cache
then install the rom
note first boot may take a realllly long time just wait for it
Cm 6.1.1
http://www.thebcblends.com/shift/roms/cm-speedy-6.1.1-alpha1.zip
What doesn't work
Bluetooth
Cam and camcorder (kinda work)
mms
There's a bit of screen tearing nothing major though(kernel isn't fully aosp compatible just yet)
Miui
http://www.thebcblends.com/shift/roms/miui-works.zip
What doesn't work
Bluetooth
Cam and camcorder
mms
Wifi (this will be fixed momentarily)

Downloading both now! I wish there was a facebook style "like" button lol.

oboroninja said:
Downloading both now! I wish there was a facebook style "like" button lol.
Click to expand...
Click to collapse
There is, it's called the thanks button

Finally get to try out MIUI. Never could cuz i had a HeroC and couldn't play with my wife's EVO. Thanks BC.

Wow BC, you are amazing
Sent from my PG06100 using XDA App

theimpaler747 said:
There is, it's called the thanks button
Click to expand...
Click to collapse
Lol yeah i hit that button instead.

i think you should join the cm team and manage the offical cm7 support for shift 4g
the second there is official support is the second i go buy the evo shift and sell my evo.

I just installed the CM rom. Is there a gapps that I can install?

dnalevelc said:
I just installed the CM rom. Is there a gapps that I can install?
Click to expand...
Click to collapse
Should be able to install the HDPI ones from their wiki here

CM didn't work for me. This is my first non-Moment ROM so I'm sure it's me.
I flashed CM from recovery. It said it completed fine. Selected reboot and got the CM boot screen. Got excited. Got less excited when the boot animation restarted on my. It then kept restarting until I pulled the battery.
So booted into recovery and cleared Dalvik. Rebooted. Same thing. Tried reflashing CM and cleared Dalvik then rebooted. Same thing.
Should I do a factory reset first? Can anyone see a step I missed?
^ Shift Faced

jesusice said:
CM didn't work for me. This is my first non-Moment ROM so I'm sure it's me.
I flashed CM from recovery. It said it completed fine. Selected reboot and got the CM boot screen. Got excited. Got less excited when the boot animation restarted on my. It then kept restarting until I pulled the battery.
So booted into recovery and cleared Dalvik. Rebooted. Same thing. Tried reflashing CM and cleared Dalvik then rebooted. Same thing.
Should I do a factory reset first? Can anyone see a step I missed?
^ Shift Faced
Click to expand...
Click to collapse
You'll need to do a factory/data reset, yes

theimpaler747 said:
You'll need to do a factory/data reset, yes
Click to expand...
Click to collapse
Thanks! I'm gonna try again
^ Shift Faced

hells yes. downloading now.
you better believe i hit that thanks like a bigrig with no breaks!

jesusice said:
Thanks! I'm gonna try again
^ Shift Faced
Click to expand...
Click to collapse
No problem, let me know how it goes

Fail... too late
jesusice said:
CM didn't work for me. This is my first non-Moment ROM so I'm sure it's me.
I flashed CM from recovery. It said it completed fine. Selected reboot and got the CM boot screen. Got excited. Got less excited when the boot animation restarted on my. It then kept restarting until I pulled the battery.
So booted into recovery and cleared Dalvik. Rebooted. Same thing. Tried reflashing CM and cleared Dalvik then rebooted. Same thing.
Should I do a factory reset first? Can anyone see a step I missed?
^ Shift Faced
Click to expand...
Click to collapse
def do a full wipe...always when flashing a rom unless you are just flashing over an update of the same rom

bcnice told me how to fix wifi i am uploading a rom with the fix now.
edit: for MIUI obviously

Damn, things are moving fast over here. Last few days have been a blur!

sdc177 said:
Damn, things are moving fast over here. Last few days have been a blur!
Click to expand...
Click to collapse
bcnice is a goon one of the main reasons I got this phone.
Here is a link to the MIUI rom with working wifi
http://dl.dropbox.com/u/11792210/miui-wifi-works.zip

Nice work Bcnice. I was wondering if u were workin on MIUI. Gonna try these out as soon as I get off work. If u need any logs or anything for these let me know ill get u what I can. Plus I'm willing to test out anything u got
perma rooted EVO SHIFT 4G

Sweet! Finally get to try miui!
Sent from my PG06100

[Q&A][ROM][Jellybean] CNA 3.6.6 for Samsung Infuse [PORT]

Welcome, everyone- this is the place to ask a question about the CNA Jellybean Rom- Port for our Infuse and more importantly hopefully have that question answered.
You may also discuss issues you are having such as can't download, which g apps do I use, getting a FC on xyz ap, and so on.
A few general Q & A's you may find helpful:
Q: What is CNA ? Any screenshot and more info?
A: Code Name Android info here: http://codenameandroid.com
Q: Where can I download this?
A: Info is in the OP, or you can go here: http://goo.im/devs/Th3Bill/CNA/Infuse
Q: After flashing or using for extended periods my phone seems a bit slow- what to do to make it faster?
A: The test build for this port ( and MIUI v4) was done on my phone since Th3Bill (OP) does not have an Infuse. (Think about that for a minute, no Infuse and to date has brought us 2 roms to enjoy )
Four things I have done that work for me to make the phone faster: 1. Update Superuser ( if applicable.) 2. Choose a static (still) wallpaper rather than a live wallpaper. 3. In developer settings, change animation /transition to "off" or "0". 4.Use the app of your choice to clean up the phone, I use Cachemate.
One other tip for better battery life - this rom will let you download and use CM 10 themes. Using one that has darker backgrounds throughout uses less battery than themes using a lot of light colors.
OK - it's all yours !! I will help as best I can, Th3Bill has a link to this page and will be checking in as often as he can - you will find he is involved and supportive and there will be updates as new things are pushed to source. Regards.

Thanks for the start of the Q&A. Let me be the first then...
I am coming from Scott's CM10, do I just wipe, wipe, wipe and reflash or do I need to Heimdall (maybe with ICS) back first then flash the CNA ROM?
Which GAPPS do you recommend?

psal217050 said:
Thanks for the start of the Q&A. Let me be the first then...
I am coming from Scott's CM10, do I just wipe, wipe, wipe and reflash or do I need to Heimdall (maybe with ICS) back first then flash the CNA ROM?
Which GAPPS do you recommend?
Click to expand...
Click to collapse
You are correct, should be able to wipe x3 and flash - one person also "fixed Permissions" to clear a FC issue.
Edit; I used the 7/26/2012 g apps, you might need to get the gallery2.apk

Here is what I used for gapps. Works just fine. v3
http://www.jokersax.com/developer-pages/jokersax/cm10-gapps/

Wiped/factory reset a couple of times, wipe cache, wipe Dalvik, another factory reset, flashed CNA ROM, flashed jellygapps v3, fixed permissions, rebooted, rebooted again and have an X, then
USB Mass Storage Toggle
App info: http://forum.xda-developers.com/showthread.php?t=1389375.
Usage: Tap on the Droid to switch UMS mode.
Tapped Droid but I cannot connect to this PC (work PC). I have to wait to I get home. Or suggestions are welcomed.

psal217050 said:
Wiped/factory reset a couple of times, wipe cache, wipe Dalvik, another factory reset, flashed CNA ROM, flashed jellygapps v3, fixed permissions, rebooted, rebooted again and have an X, then
USB Mass Storage Toggle
App info: http://forum.xda-developers.com/showthread.php?t=1389375.
Usage: Tap on the Droid to switch UMS mode.
Tapped Droid but I cannot connect to this PC (work PC). I have to wait to I get home. Or suggestions are welcomed.
Click to expand...
Click to collapse
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.

That's correct. So no big deal, another hour and I will be home and hopefully up and running once I connect there. I will post again with the results.

good Q&A

Pony Express said:
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.
Click to expand...
Click to collapse
Okay, I am home, USB is connected, tapped the Droid, it says UMS is currently enabled. I downloaded the app from the link...
For the devices listed above, the App works like a charm.
•Latest stable version (1.1.4): Download APK (you'll probably want this one!)
Now what? Reboot and flash it?

psal217050 said:
Okay, I am home, USB is connected, tapped the Droid, it says UMS is currently enabled. I downloaded the app from the link...
For the devices listed above, the App works like a charm.
•Latest stable version (1.1.4): Download APK (you'll probably want this one!)
Now what? Reboot and flash it?
Click to expand...
Click to collapse
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:

Pony Express said:
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.
Click to expand...
Click to collapse
Pony Express said:
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:
Click to expand...
Click to collapse
Also tried it with the other file found on the thread (USB mass storage)...neither work.
Finding Update package...
Opening update package...
Installing update...
Installation aborted.
The pix of Droid laying down, check open and a red triangle with exclamation in it showing up.
Log says:
Installation aborted.
I:Can't partition unsafe device: /dev/block/mmcblk0p1
I:Can't format unknow volume: /external_sd
I:Can't partition unsafe device: /dev/block/mmcblk1p1

I suppose the best route would be to start over. There should be no problem coming from Scott's excellent build.
Having said that, try installing a CM9 rom, let it settle in for 5 -10 minutes and reboot, wipes, flash and see if it will boot. Go back later and get the g apps. This is what worked for me. I can tell you that during the install, phone will cut off before making it back to the "reboot system now" screen, however it will restart and take you there so just hit power button to reboot. This rom does take 2-3 times as long to boot for the first time as opposed to other roms.

I'm not so sure you want to flash since they are .apk's
Sent from my SGH-I997 using xda app-developers app
---------- Post added at 04:45 PM ---------- Previous post was at 04:44 PM ----------
Woops, I misunderstood the problem.
Sent from my SGH-I997 using xda app-developers app

Pony Express said:
I suppose the best route would be to start over. There should be no problem coming from Scott's excellent build.
Having said that, try installing a CM9 rom, let it settle in for 5 -10 minutes and reboot, wipes, flash and see if it will boot. Go back later and get the g apps. This is what worked for me. I can tell you that during the install, phone will cut off before making it back to the "reboot system now" screen, however it will restart and take you there so just hit power button to reboot. This rom does take 2-3 times as long to boot for the first time as opposed to other roms.
Click to expand...
Click to collapse
SD card in or out?

Pony Express said:
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:
Click to expand...
Click to collapse
Bill did include the USB Mass Storage Toggle in the build. It should be there when you flash the rom. It was there when I flashed and it works. No additional d/l's were necessary.
Also, I didn't have any of the restarts you mentioned. I had a black screen for about 30 seconds when it went to the new CWM and then a black screen for about 30 more seconds when it rebooted to the Nexus X.
I did think I had problems because it stayed on the Nexus X screen for about 5 minutes before it booted up to the lock screen.
Edit: Also it booted itself to the Nexus 7 screen without asking after installing the rom package. Had to go back in and add the gapps.

psal217050 said:
SD card in or out?
Click to expand...
Click to collapse
I always leave my SD card in... no problems for me so far.

dparrothead1 said:
Bill did include the USB Mass Storage Toggle in the build. It should be there when you flash the rom. It was there when I flashed and it works. No additional d/l's were necessary.
Also, I didn't have any of the restarts you mentioned. I had a black screen for about 30 seconds when it went to the new CWM and then a black screen for about 30 more seconds when it rebooted to the Nexus X.
I did think I had problems because it stayed on the Nexus X screen for about 5 minutes before it booted up to the lock screen.
Click to expand...
Click to collapse
Thanks, man. That is exactly the way the install should go.

Pony Express said:
I always leave my SD card in... no problems for me so far.
Click to expand...
Click to collapse
+1 for leaving the SD card in....never take mine out when flashing.

is 720 recording fixed, or is it still recording a bit choppy?

SMiGGs said:
is 720 recording fixed, or is it still recording a bit choppy?
Click to expand...
Click to collapse
It is still a little choppy.

[Rom] Jellybean for Droid

Have fun, and format /system before flashing!
added camera app, fm radio, media_codecs.xml (fixes sound probs)
http://www.mediafire.com/file/rm3t3813wwxaewd/cm-10-20120826-UNOFFICIAL-sholes.zip
bootloops? ts problems?
did you format system?
try safe kernel (stockish ram/sgx/dsp timings)
http://www.mediafire.com/file/0kci9mvja4b9ssn/jb_safe_kernel.zip
or safer kernel (doesn't reprogram core clock at boot, exact stock timings)
http://www.mediafire.com/?do6yfe1c79v7xj7
or safest (same as safer with cpu max at 800mhz instead of 1000)
http://www.mediafire.com/file/926lgj8qu2a8l8s/jb_safest_kernel.zip
still no go?
try ics build here:
http://forum.xda-developers.com/showpost.php?p=29471613&postcount=1855
with 160mhz kernel
then wipe everything and try this build again, or enjoy ics :]
if you get stuck without touchscreen don't sbf back to stock
try safe kernel and ics build, if you still have troubles pm me
Gapps: http://www.mediafire.com/file/6gm3mm7iyi775n6/gapps-jb-20120726-minimal-datainstall.zip
broken: lots? please test
greets and credit: nadlabak, quarx2k, tpruvot, mbm, everybody at #motomagic, et cetera

kfazz said:
Have fun!
Build: http://www.mediafire.com/file/elk7kvw2hyu28ij/cm-10-20120824-UNOFFICIAL-sholes.zip
Gapps: none yet
broken: lots? please test
greets and credit: nadlabak, quarx2k, tpruvot, mbm, everybody at #motomagic, et cetera
Click to expand...
Click to collapse
Downloading
since this is CM10 based would regular cm10 gapps work? Thanks
Edit: It doesn't seem to boot. It gets stuck on the android screen.

about 3m freee in system, so regular jb gapps wont work unless modified to use /data. ics gapps work.
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so
or just delete it from the zip before flashing

kfazz said:
about 3m freee in system, so regular jb gapps wont work unless modified to use /data. ics gapps work.
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so
or just delete it from the zip before flashing
Click to expand...
Click to collapse
Installd ics gapps.
So, got rid of bootloop using adb to remove gps. Boots up fine after that.
CPU overclock settings can not be changed in settings. Works fine in setcpu.
No camera app included.
EDIT: Phone was plugged into usb port on computer entire time, and I noticed that the battery was not charging. Flashed back to my daily driver for now and phone is charging again. Not sure if this is common to anyone else or just a bug for me.

this is filthy! so fast. i used http://forum.xda-developers.com/showpost.php?p=30325746&postcount=1977 nightwing's .zip to get market over adb. wireless also works. mp3's through music load up like it's going to play, but then flashes a screen where song progress is complete and goes back to the artist list, but media server found all my songs. m4a's say file not supported. bluetooth paired with my keyboard and worked. voice dialer worked to open apps and i got a few beeps out of it at the end of commands so some sound is working. mine's not activated though so i can't test radios. donations on the way. thanks for all the hard work.

peeyourownpants said:
this is filthy! so fast. i used http://forum.xda-developers.com/showpost.php?p=30325746&postcount=1977 nightwing's .zip to get market over adb. wireless also works. mp3's through music load up like it's going to play, but then flashes a screen where song progress is complete and goes back to the artist list, but media server found all my songs. m4a's say file not supported. bluetooth paired with my keyboard and worked. voice dialer worked to open apps and i got a few beeps out of it at the end of commands so some sound is working. mine's not activated though so i can't test radios. donations on the way. thanks for all the hard work.
Click to expand...
Click to collapse
I can confirm 3G and calling works.
also, is there a way to get google now on this?

db2u said:
Installd ics gapps.
So, got rid of bootloop using adb to remove gps. Boots up fine after that.
CPU overclock settings can not be changed in settings. Works fine in setcpu.
No camera app included.
EDIT: Phone was plugged into usb port on computer entire time, and I noticed that the battery was not charging. Flashed back to my daily driver for now and phone is charging again. Not sure if this is common to anyone else or just a bug for me.
Click to expand...
Click to collapse
Might flash back to test some more once my battery gets up to a decent level

Can't get it to boot, using CWR 3 from Rom Manager

jyeley5 said:
Can't get it to boot, using CWR 3 from Rom Manager
Click to expand...
Click to collapse
Originally Posted by kfazz
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so

jyeley5 said:
Can't get it to boot, using CWR 3 from Rom Manager
Click to expand...
Click to collapse
db2u said:
Originally Posted by kfazz
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so
Click to expand...
Click to collapse
I have 3 loops at the "M" screen each time before it moves on to the android screen and finishes the boot even with gps.sholes.so removed
Sent from my Galaxy Nexus using Tapatalk 2

Finally got it booting, thanks for the help!
kfazz: Awesome work!!! What's the current status of FM radio though? I tried the FMRadio.apk from the Defy and it FC'd as soon as I plugged in my headphones

peeyourownpants said:
I have 3 loops at the "M" screen each time before it moves on to the android screen and finishes the boot even with gps.sholes.so removed
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I used to get that on CM7.1 I think it was a bad flash, It went away when I flashes Steeldroid, and I am definitely not getting it on this build

mediafire virus
After using link at top of page to download from media fire using Windows explorer I got a message saying virus detected on my computer and the page looks exactly like Microsoft security essentials I clicked no and computer crashed!!! This makes 2 times I have gotten virus from media fire last time I was able to restore to an earlier backup this time computer wouldn't let me boot into recovery or anything after much trouble I got it to boot into safe mode only because I have recovery disks that came with PC but have not been able to repair it complelty yet because if I try to restore it ends with an error about system contains some file ( idont remember name) so if I can't figure it out I guess I will backup important files and do a complete restore from factory disks ( last resort ) . Just a warning . If anybody has any answers and or ways to prevent this please PM me. Hopefully this won't happen to anyone else
Sorry for highjacking thread I know this is off subject but don't want anyone else to become a victim!!
Link worked fine when downloaded from phone but I have no way to modify zip or use adb to make JB boot
Sorry to kfazz for this post I know its not his fault I found many people with same problem with a Google search
Keep up the great work kfazz you are the best!!

peeyourownpants said:
I have 3 loops at the "M" screen each time before it moves on to the android screen and finishes the boot even with gps.sholes.so removed
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Similar problems, but mine's randomly deciding to boot up or not. Sometimes it doesn't boot at all, other times it boots on the first try.
However since the Camera, Wifi, and other Jelly Bean goodness works, I can't help but to thank you on this release, Good luck on further development!
EDIT: And now it won't even boot, sometimes it just gets stuck at a blank screen. Bummer.

denwaotoko said:
Similar problems, but mine's randomly deciding to boot up or not. Sometimes it doesn't boot at all, other times it boots on the first try.
However since the Camera, Wifi, and other Jelly Bean goodness works, I can't help but to thank you on this release, Good luck on further development!
Click to expand...
Click to collapse
i cant get the new build to boot i removed the gps.sholes file and im just bootlooping at m logo

wolf45801 said:
i cant get the new build to boot i removed the gps.sholes file and im just bootlooping at m logo
Click to expand...
Click to collapse
Which one, the one with fm radio and camera? I was able to get the first build to boot fine after removing gps.sholes

ASAM123 said:
Which one, the one with fm radio and camera? I was able to get the first build to boot fine after removing gps.sholes
Click to expand...
Click to collapse
i couldn't get the newest to boot either, just loops at the M.
i poked into the .zip and the gps file is gps.goldfish.so, not sure if that's relevant...

ASAM123 said:
Which one, the one with fm radio and camera? I was able to get the first build to boot fine after removing gps.sholes
Click to expand...
Click to collapse
i finally got it working i downloaded the new one but for some reason mediafire didnt download the full rom so had to redownload

I can't get it to boot up. I end up with red M bootloops with both the 8/24 and 8/26 builds. I wiped everything between flashes. Any ideas?

Flashed over 7/12 ics build seems as good as ics was don't think I will be going back to ics. Gallery opens but never shows any pics fm radio is nice only plays in mono other than that everything else I have tested is working correctly great work as usual
Thanks to all who are making this possible
Sent from my Droid using xda app-developers app

New OP6 user

Hello all
Long time no posting, basically since OPO days
Im back with OP family once again
I forgot all procedures for bootloader, recovery, root etc
https://forum.xda-developers.com/oneplus-6/development/rom-pixen-os-t3969005
I want this rom but i got few questions
And my newly aquired phone came with OP6 02 beta 25 build
Recovery - seems factory
Bootloader - how to check that?
Tried search tho, but im a bit of scared to even try anything without answers, it just isn't complete, too much of doubt i guess (how, where and why)
Thanks in advance
Kind regards
Igor

Developer Options/OEM Unlock = turn it on
Check if ADB is enabled, if not, enable it and check if it's working correctly with drivers
Power off phone then volume up+power button
You are now in fastboot mode, connect phone to PC
Open windows prompt,type "Fastboot Devices" and check if phone is correctly seen
Then type "Fastboot OEM Unlock" a window should now appear on phone, select yes
Phone will reboot and formatted (so make backup before!)
At boot you'll now see bootloader warning screen, it's normal, wait for phone to boot up
Now you need TWRP
Reboot bootloader
You should have 2 TWRP files: one is .img and other is .zip (check here https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965)
Connect phone to PC, type in prompt "fastboot boot name_of_recovery.img" phone should reboot and TWRP will start
Now from TWRP copy the TWRP.zip on phone memory than flash it, after that reboot to recovery to make sure it's still there, if so you can check guide to install PixenOS
Hope it's all clear

Hitman478™ said:
Hope it's all clear
Click to expand...
Click to collapse
Wow, thanks, i followed all instrucstions, and i did it,
Thanks a lot, this seems a lot easier then before tho , took me 30minutes for everything, and PixenOS is smooth as hell
proof attached

rogisha said:
Wow, thanks, i followed all instrucstions, and i did it,
Thanks a lot, this seems a lot easier then before tho , took me 30minutes for everything, and PixenOS is smooth as hell
proof attached
Click to expand...
Click to collapse
Is PixenOs working well? No bugs etc...?

Hitman478™ said:
Is PixenOs working well? No bugs etc...?
Click to expand...
Click to collapse
Well i dont see anything yet, for now it's smooth and bug-free, i will test more tonight after work, i'll let You know bro, FP is working far better and much faster
I am curious too, i was using OOS Beta 25 for a month and gps didnt work, various bugs with SystemUI and SOT was so low 3.5h lol

rogisha said:
Well i dont see anything yet, for now it's smooth and bug-free, i will test more tonight after work, i'll let You know bro, FP is working far better and much faster
I am curious too, i was using OOS Beta 25 for a month and gps didnt work, various bugs with SystemUI and SOT was so low 3.5h lol
Click to expand...
Click to collapse
For me Oos open beta is always working fine with no crash or bugs, but i had your same SOT, minute less or more

Well it seems that my GPS is still not working
Is there any way to check that using some other app then G Maps
What are the chances that i got faulty devices with this GPS issues?

Try Google Earth, and try to reboot phone, GPS for me, at every first start of new rom, whatever it is, don't Working till restart

Hitman478™ said:
Try Google Earth, and try to reboot phone, GPS for me, at every first start of new rom, whatever it is, don't Working till restart
Click to expand...
Click to collapse
I installed some gps status apps and it worked after a restart
So far i do recommend PixenOS
Only problem/bug is with sound, dont know why it goes on vibrate all the time, im not switching it
SOT is amazing, smooth and cool, new gestures work just fine
You got 'thanks'
Cheers

rogisha said:
I installed some gps status apps and it worked after a restart
So far i do recommend PixenOS
Only problem/bug is with sound, dont know why it goes on vibrate all the time, im not switching it
SOT is amazing, smooth and cool, new gestures work just fine
You got 'thanks'
Cheers
Click to expand...
Click to collapse
does the oos camera works with the 60 fps etc etc?

Nautilus99 said:
does the oos camera works with the 60 fps etc etc?
Click to expand...
Click to collapse
Yup 1080p and 4k @ 60fps
It's really amazing