Related
Here's a step-by-step tutorial on how to enable JIT, HW Acceleration and apply a fix that will boost your Quadrant scores to 1000+.
Disclaimer: I cannot be held responsible for any damage you may inflict on your device. Any followed step here described is of your full responsability.
Before we start, you'll need:
1. http://dl.dropbox.com/u/13427114/O1_boost.zip
2. Custom recovery
(check this thread, credits: drellisdee)
After downloading (1) and flashing (2), it's a walk in the park:
1. Reboot into recovery (vol down + home + power) or via adb or whatever.
2. Toggle USB, copy the .zip you downloaded (1) over to your sdcard.
3. Flash zip from sdcard option, choose the .zip. Reboot.
How to confirm if JIT and HW accel are active?
For JIT, run a linpack. If it scores around ~7-7.5, it's active.
For HW acc it's not so easy but homescreen scrolling should be snappier.
For the fix, run a Quadrant, if it scores above 1000 or around that, it worked.
P.S. I highly advise you to flash a ROM with all these tweaks and more. Check out void ROM for example.
what does it mean for hardware acceleration in technical terms?
Is it an optimization of the os enabling some function like the just in time compiler??
After that my question...
I've already enabled jit i can flash this zip to hwacc??
thanks a lot
Noejn said:
Here's a step-by-step tutorial on how to enable JIT and HW Acceleration on your LG P500 Optimus One.
Disclaimer: I cannot be held responsible for any damage you may inflict on your device. Any followed step here described is of your full responsability.
Before we start, you'll need:
1. dl"dot"dropbox"dot"com/u/13427114/mone/o1_jit-hwacc_enabler.zip
(add http and replace "dot" for .)
2. Custom recovery
(check this thread, credits: drellisdee)
After downloading (1) and flashing (2), it's a walk in the park:
1. Reboot into recovery (vol down + home + power) or via adb or whatever.
2. Toggle USB, copy the .zip you downloaded (1) over to your sdcard.
3. Flash zip from sdcard option, choose the .zip. Reboot.
How to confirm if JIT and HW accel are active?
For JIT, run a linpack. If it scores around ~7-7.5, it's active.
For HW acc it's not so easy but homescreen scrolling should be snappier.
(credits: drellisdee, ruigui)
Click to expand...
Click to collapse
LOL I did the hw accel for the lg ally about 1 week ago and gave it to a few people and its leaked out already . You may also want to experiment using a different gralloc too for better performance.
drellisdee said:
I did the hw accel for the lg ally about 1 week ago and gave it to a few people and its leaked out already . You may also want to experiment using a different gralloc too for better performance.
Click to expand...
Click to collapse
You could've already shared in this section then.
Regarding the gralloc, it was going to be my next step but I don't have the phone anymore. So if anyone is interested I can provide a gralloc that should give some boost performance-wise, pm for link.
i flashed it. it seems to work fine, but before flashing it my quadrant rsul with just jit enabled was around 480 while now it's about 440?!?!?!?
What to do??
Do you have an explanation what the
dalvik.vm.dexopt-data-only=1
setting does? I have found many links where it was mentioned but none with a good explanation, what it exactly does.
Thanks for any answers.
skywalker788 said:
what does it mean for hardware acceleration in technical terms?
Is it an optimization of the os enabling some function like the just in time compiler??
After that my question...
I've already enabled jit i can flash this zip to hwacc??
thanks a lot
Click to expand...
Click to collapse
GUI is rendered by GPU instead of CPU for instance.
And yes you can.
skywalker788 said:
i flashed it. it seems to work fine, but before flashing it my quadrant rsul with just jit enabled was around 480 while now it's about 440?!?!?!?
What to do??
Click to expand...
Click to collapse
HW accel kills some points in Quadrant but the overall experience (especially in the menu scrolling or games) is smoother.
Thanks a lot for your reply anyway in the everyday use i tasta the difference and i agree with you about performance... thanks a lot
Sent from my LG-P500 using XDA App
skywalker788 said:
Thanks a lot for your reply anyway in the everyday use i tasta the difference and i agree with you about performance... thanks a lot
Click to expand...
Click to collapse
Can you test something for me (or anyone else)?
Flash this:
http://dl.dropbox.com/u/13427114/O1_boost.zip
(You won't lose JIT or HW acc)
Then run a Quadrant. Post the score please.
I will just right now
yes i could but tell me something about and how to turn back to the previous configuration if something goes wrong
skywalker788 said:
yes i could but tell me something about and how to turn back to the previous configuration if something goes wrong
Click to expand...
Click to collapse
Do a Nand before flashing :>
I just flashed your zip and now my result went from 460~ to 1024 lolz
I would like to know what this does exactly :>
I'll test in normal use if there will be some improvements
Did the same thing - 1020! Can someone explain it?
I flashed last update when i try it with some games they seem to be smoother and more fluid. the delay in the browser in zooming whit multitouch are not solved but in general it seemms to work really good.
quadrant full benchmark reach 1016!!!
thanks for your improvements
Awesome! 1074 was my best result.
Sorry: 1089
valore quadrant
People, relax! Its not real. Quadrant has a bug.
denden79 said:
People, relax! Its not real. Quadrant has a bug.
Click to expand...
Click to collapse
Nah, it's real.
The results you were getting before, those weren't real.
You won't see an increase in performance sorry haha; it's not a tweak, only a fix to show the true quad scores.
Now you can know how good your phone is. I never expected +1000 tho.
First post updated.
Btw, try without hardware acceleration (I think it eats around 50 points @ quadrant):
http://dl.dropbox.com/u/13427114/O1_boost_no-hwacc.zip
Try that one. Does it increase a bit?
Just share all these with anyone.
All fix included:
New added in v2:
1. A more native fix to USB connection ( moto portal&tool is available now )
2. add imoseyon tweak script
3. improve GPS(add UK/brazil/CH+HK+TW/USA services info)
4. some adjustment on auto brightness
5. fix losing (gapps) icon issue (area related issue, redirect google services in hosts)
6. enable WIFI tethering
7. try to improve battery charging(replacing charge_only_mode)
8. try to improve touch sensitivity (build.prop)
9. clean some system apps/junks ( common/necessary gapps are reserved )
10.update moto IME from GB leak
11.improve network and voice (not sure)
12.fix sensor/GPS crash in 0906 version(replace 2nd-init with RC1.5)
Download Link: http://www.mirrorcreator.com/files/VMXNTP1B/All_in_One_Fix_for_CM7_and_MIUI_v2.0.7z_links
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1.bootmenu overclock
2./data formatting and restoring issue on CWM
3.CPU governors
4.light/gravity
5.keyboard mapping (QWERTY/Z)
6.GSM fix
7.keyboard backlight
8.camera upside down
9.dual way call recording
10.soft keyboard half size
11.random SD card mounting issue in CWM
12.charger light
13.compass
14.APN fix
15.share sd card / DATA function in bootmenu
16.300mhz fix
17.stock recovery fix
18.battery jumping
and also include tweaks and optimization：
1.enhanced sms and location info(ch)
2.moto IME
3.tweaks on framework and build.prop
4.optimized auto brightness
5.power profile
6.some scripts from wajk in /system/etc/init.d
7.full Gapps
Unsolved:
1.video decoding/encoding(720p recording)
2.enable 4-lv freq setting in bootmenu( a little edit in overclock.c)
3.share SD/data/system function in bootmenu are still buggy,sometimes is ok, sometimes not.
4.Alt-lock (I thinks we can ingore this)
5.battery charging(im not sure, but someone said the full voltage in stock 2.2 can reach 4200+ and down in 3100, in CM7 it only get 4160 and down in 3300)
Please use winrar3.50+ or latest 7zip to depack it.
Download link: http://www.mirrorcreator.com/files/IYOX37NY/fix-for-CM7_0.7z_links
Amazing share man!!! Thanks a lot!!!
The link does not work for me.
[Failed to open redirect file]
sahilarora911 said:
Amazing share man!!! Thanks a lot!!!
The link does not work for me.
[Failed to open redirect file]
Click to expand...
Click to collapse
My fault. I post the wrong link. I have updated a new one. Try again.
Endless7 said:
My fault. I post the wrong link. I have updated a new one. Try again.
Click to expand...
Click to collapse
Hey Endless, can you post what is missing/still needs fix?
r2beta0 said:
Hey Endless, can you post what is missing/still needs fix?
Click to expand...
Click to collapse
1.video decoding/encoding(720p recording)
2.enable 4-lv freq setting in bootmenu( a little edit in overclock.c)
3.share SD/data/system function in bootmenu are still buggy,sometimes is ok, sometimes not.
4.Alt-lock (I thinks we can ingore this)
5.battery charging(im not sure, but someone said the full voltage in stock 2.2 can reach 4200+ and down in 3100, in CM7 it only get 4160 and down in 3300)
Ah,for 720p recording. Jorixine send me a PM with a possible method. I try,but failed. But I still want to post here.
The fix is somewhere within media_profiles.xml and build.prop
media_profiles.xml can be edited as you please, even for making the HD videos to size lesser than normal
For it to work, in the build.prop you have to change the following:
ro.media.capture.maxres=5m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=60
ro.media.enc.hprof.vid.width=1280
ro.media.enc.hprof.vid.height=720
ro.media.capture.flash=led
ro.media.capture.useDFR=1
ro.media.capture.flashIntensity=42
ro.media.capture.torchIntensity=42
ro.media.capture.classification=classE
ro.mot.setuptype=1
ro.media.enc.aud.fileformat=3gp
ro.media.enc.aud.codec=amrnb
ro.media.enc.aud.bps=12200
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.media.dec.jpeg.memcap=20000000
r,o.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
He insists, recording 720p is working, the thing is that the phone reboots by itself a lot and some of those reboots are even when it never finished loading the OS, its very annoying.
Seems like the key question is to keep playing with these values. Moreover where it says ClassE, because in GB that comes as ClassH, but he changed it.
Maybe somebody with more expertise can playaround with these two files, get the correct configuration and avoid the rebooting issue.
Click to expand...
Click to collapse
Endless7 said:
Ah,for 720p recording. Jorixine send me a PM with a possible. I try,but failed. But I still want to post here.
Click to expand...
Click to collapse
I think we can make it work with the original camera application.<
Hey im the onlyone getting "unsupported compression method" on 7z¿
WeeDv2 said:
I think we can make it work with the original camera application.<
Hey im the onlyone getting "unsupported compression method" on 7z¿
Click to expand...
Click to collapse
Use winrar3.50 or latest 7zip. Because I use highest compress level.
I think I have fix the battery charging issue. Now I am on 4167 at 92%. No jumping during charing.
What about USB not working as in Stock? any update on that? i think its the MotoUSB.apk, ill try replacing it with stock USB.apk from Arg Movistar 2.2.2
(and yeah i already edited MIUI framework-res.apk)
Endless, your framework-res.apk included is the CM7 one right? cuz the one of MIUI usually is about 7 to 8 MB and your is 4/5 MB
WeeDv2 said:
What about USB not working as in Stock? any update on that? i think its the MotoUSB.apk, ill try replacing it with stock USB.apk from Arg Movistar 2.2.2
(and yeah i already edited MIUI framework-res.apk)
Endless, your framework-res.apk included is the CM7 one right? cuz the one of MIUI usually is about 7 to 8 MB and your is 4/5 MB
Click to expand...
Click to collapse
It's CM7 one.
word patch.
Very nice share Endless7 Thanks
Endless7 said:
I think I have fix the battery charging issue. Now I am on 4167 at 92%. No jumping during charing.
Click to expand...
Click to collapse
I too get to somewhere around there while charging but at 100% I get 4169mV I guess, but if I keep charging it after that it drops to 4134 mV something.
And the link is fine now, thanks!!
Endless7 said:
1.video decoding/encoding(720p recording)
2.enable 4-lv freq setting in bootmenu( a little edit in overclock.c)
3.share SD/data/system function in bootmenu are still buggy,sometimes is ok, sometimes not.
4.Alt-lock (I thinks we can ingore this)
5.battery charging(im not sure, but someone said the full voltage in stock 2.2 can reach 4200+ and down in 3100, in CM7 it only get 4160 and down in 3300)
Click to expand...
Click to collapse
So, have media playback besides mp3/mp4 been fixed?
Is this a complete CM7?
Because decompressed its only ~83 MB....
As the title says, they are fixes for applying on a defy's cm7 or miui, to make it work on milestone 2.
It's not a complete ROM.
ah ok and install logically in cwm "apply update from zip" ?
r2beta0 said:
So, have media playback besides mp3/mp4 been fixed?
Click to expand...
Click to collapse
No,this issue is described in 1th point as video decoding.And i think this also cause the 720p problem.
mj084 said:
ah ok and install logically in cwm "apply update from zip" ?
Click to expand...
Click to collapse
No,but you can overwrite cm7 package with this.
overwrite cm7 package with this....how?
WORKING! INSTALL TO EXPERIENCE SPEED! PLEASE RATE THE THREAD AGAIN
ZIP ADDED IN THE END OR MANUALLY-
HOW TO:
1, Open "Root Explorer" and click the R/W
2, Go to /system/build.prop.
3,backup yout current build.prop.
4, Long-presson Build.Prop and you’ll see a pop up.
5, Text Editor.
6, Type in those few line of words below into the last line of the text then save.
7,reboot and enjoy
Detailed guide on how to apply all the tweaks - http://www.freeyourandroid.com/guide/how-to-edit-build-prop
debug.sf.hw = 1
Render UI with GPU (relieves pressure on CPU)
dalvik.vm.heapsize = 32m
Set size of Dalvik VM heap (how much RAM each instance of the VM is allowed); depending on how much RAM that is available to a device, this can be increased.
persist.adb.notify = 0
Stop debugging icon from appearing in status bar
windowsmgr.max_events_per_sec = 120
Increase to improve scrolling response
persist.sys.use_dithering = 0
Do not use surface dithering (surface dithering improves image quality)
debug.sf.nobootanimation = 1
Disable boot animation
ro.HOME_APP_ADJ = 1
force home launcher into memory
ro.sf.lcd_density = 140
Set screen density; change according to your device or what suits you, a lower value will display more but may be too small to use on a device with a smaller screen. Also note that changing the pixel density will make some applications in the new market ‘incompatible with your device’.
mot.proximity.delay = 150
Lower to fix black screen after calls issue
ro.telephony.call_ring.delay = 0
Decrease dialling out delay
ro.gsm.2nd_data_retry_config = max/_retries=3, 2000, 2000, 2000
Change MMS APN retry timer from 5s to 2s
wifi.supplicant_scan_interval = 120
ro.ril.disable.power.collapse = 0
pm.sleep_mode = 1
Increase battery saving potential
ro.com.android.dataroaming=true
Enables data-roaming by default in the build
ro.com.android.dateformat=dd-MM-yyyy
Changes default date format to day-month-year
ro.config.alarm_alert=*.ogg
ro.config.ringtone=*.ogg
ro.config.notification_sound=*.ogg
Changes the default sounds for each item. Must correlate to ogg files available in /system/media/audio/
ro.build.display.id=NAMEOFROM
In Settings>About Phone, it lists the name of the build number. This is where you set it.
ro.product.locale.language=en
ro.product.locale.region=GB
Sets the default region and language. You must have the correct letter combo, and the language must be available for this to work.
HOW TO FLASH.
BOOT INTO CMW.
MOUNT AND STORAGE.
MOUNT SYSTEM
INSTALL ZIP FROM SD CARD
SELECT buildworking.
press THANKS if i helped
WORKING !!!! -
http://dl.dropbox.com/u/54790911/buildworking.zip
Thanx Dude...Create A Flashable Zip File To Install It...
abhirockz said:
Thanx Dude...Create A Flashable Zip File To Install It...
Click to expand...
Click to collapse
I can create a flashable zip file but that wont be much helpful because everyone doesnt want all the tweaks.
As of for now, i will suggest if you want change your Screen Density download LCD Density from Market
https://play.google.com/store/apps/details?id=lv.n3o.lcddensity&hl=en
abhirockz said:
Thanx Dude...Create A Flashable Zip File To Install It...
Click to expand...
Click to collapse
if you wish to help
http://forum.xda-developers.com/showthread.php?p=23351226#post23351226
Hey ....Is There Anyway To Change Icons In App Drawer..I Want To Change Few System Apps Icons Like Camera,Gallery etc....Help Me
there is a way..i making a flashable zip for it..but i need some files.. refer -http://forum.xda-developers.com/showthread.php?p=23351226#post23351226
i am done making a SGS-II themed..just need some file then i will compile and upload
Take a look
abhirockz said:
Hey ....Is There Anyway To Change Icons In App Drawer..I Want To Change Few System Apps Icons Like Camera,Gallery etc....Help Me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=23359071#post23359071
Thanx For The SGS-II Theme...I Uploaded The Files You Needed check The Other Thread..
Anybody tried it ourt yet. What are the result...
I will flash tonight and let you guys know
abhirockz said:
Thanx Dude...Create A Flashable Zip File To Install It...
Click to expand...
Click to collapse
done.... try this
WeandDroid said:
done.... try this
Click to expand...
Click to collapse
I softbricked doing this, is it just me or a general problem. Moreover updating this zip via recovery failed.
dunn try this folks when u flash dis zip its soft bricking the phone
both the zips build and sg2 theme when flashed are soft bricking da phone so to DEV appreciate ur gud work but hope u rectify dis prob and come out wid a solution
Delay
The zip will be ready soon. Our Developers have started working on it. Sorry for the inconvenience and Delay.
chaitanyakanuri said:
dunn try this folks when u flash dis zip its soft bricking the phone
both the zips build and sg2 theme when flashed are soft bricking da phone so to dev appreciate ur gud work but hope u rectify dis prob and come out wid a solution
Click to expand...
Click to collapse
princeomi said:
i softbricked doing this, is it just me or a general problem. Moreover updating this zip via recovery failed.
Click to expand...
Click to collapse
this is fixed. :d
Flashing complied.. it works..
schalkerjung1984 said:
Flashing complied.. it works..
Click to expand...
Click to collapse
Worked a lot on it Thanks!!
WeandDroid said:
Worked a lot on it Thanks!!
Click to expand...
Click to collapse
in sometime the theme will also work! Just need your support and patience!
[b]working now!!!![/b]
chaitanyakanuri said:
dunn try this folks when u flash dis zip its soft bricking the phone
both the zips build and sg2 theme when flashed are soft bricking da phone so to dev appreciate ur gud work but hope u rectify dis prob and come out wid a solution
Click to expand...
Click to collapse
princeomi said:
i softbricked doing this, is it just me or a general problem. Moreover updating this zip via recovery failed.
Click to expand...
Click to collapse
karayemis said:
anybody tried it ourt yet. What are the result...
I will flash tonight and let you guys know
Click to expand...
Click to collapse
working now!!!!
Hi everyone,
It's my fist post on XDA forum :angel:
I have problem with overclocking my GPU in Sensation. I tried to change "30000000" to "echo 32000000" in max_gpuclk file.
(/sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk)
But it does not work. I use "root explorer".
After editing file and click save changes I see something like that: "File saved. Original file backed up as max_gpuclk.bak"
But when I trying to check this file there is still "300000000"
Any ideas ?
:fingers-crossed:
pawel30w said:
Hi everyone,
It's my fist post on XDA forum :angel:
I have problem with overclocking my GPU in Sensation. I tried to change "30000000" to "echo 32000000" in max_gpuclk file.
(/sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk)
But it does not work. I use "root explorer".
After editing file and click save changes I see something like that: "File saved. Original file backed up as max_gpuclk.bak"
But when I trying to check this file there is still "300000000"
Any ideas ?
:fingers-crossed:
Click to expand...
Click to collapse
If I'm not wrong, you need to have a kernel which supports the 320Mhz 3D GPU value in order for you to OC to that value. Which kernel are you using?
wlteh said:
If I'm not wrong, you need to have a kernel which supports the 320Mhz 3D GPU value in order for you to OC to that value. Which kernel are you using?
Click to expand...
Click to collapse
I have SebastianFM kernel 1.5.2.
and CPU on 1782 MHz
in HTC Sensation XE
pawel30w said:
I have SebastianFM kernel 1.5.2.
and CPU on 1782 MHz
Click to expand...
Click to collapse
Shouldn't have any problems with SebastianFM's kernel. Is it because you realize that it doesn't stick after a reboot? In order to get the settings to stick, you need to put it into a script and place the script in the /etc/init.d folder.
I use this app, works very very good, for oc cpu, gpu, voltages, and some tweaks like disable vsync.
http://forum.xda-developers.com/showthread.php?t=1719934
PS.: Press thanks button
go to system/etc/init.qcom.post_boot.sh
search for the line echo '300000000' sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/gpu_maxclk
change the ' ' to 320000000
and see if it changed.i think it will work
rzr86 said:
go to system/etc/init.qcom.post_boot.sh
search for the line echo '300000000' sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/gpu_maxclk
change the ' ' to 320000000
and see if it changed.i think it will work
Click to expand...
Click to collapse
I've looked for and I didn't find these line. I copied that file to my PC, and I didn't find it again ;/
But I think @insestito app is working są it's ok
Thanks guys
pawel30w said:
I've looked for and I didn't find these line. I copied that file to my PC, and I didn't find it again ;/
But I think @insestito app is working są it's ok
Thanks guys
Click to expand...
Click to collapse
for sure check gpu_maxclk if it shows you 320000000
follow the path as i mentioned in my previous post
hi all ,
i'll be very short , so ... i got ics for my tablet and i only got one problem , the rom i'm using is not for my tablet but it works 'cause they got the same Hardware but here's the problem , this rom is made for 800x480 screen and mine is 800x600 and here's the question , is it possible to change system resolution to fit all of my screen ? sorry for my bad english
JackGalaxy said:
hi all ,
i'll be very short , so ... i got ics for my tablet and i only got one problem , the rom i'm using is not for my tablet but it works 'cause they got the same Hardware but here's the problem , this rom is made for 800x480 screen and mine is 800x600 and here's the question , is it possible to change system resolution to fit all of my screen ? sorry for my bad english
Click to expand...
Click to collapse
you could try installing es file explorer, open the app, go to its settings, then to root settings and check all 4 boxes. next go into the root directory and find the system folder. there you should find the build.prop file. open it using the es file editor. look for the lcd density line and you can change the value. try lowering the number by a quarter. see if that helps.
hope that this wasn't too confusing.
veracu said:
you could try installing es file explorer, open the app, go to its settings, then to root settings and check all 4 boxes. next go into the root directory and find the system folder. there you should find the build.prop file. open it using the es file editor. look for the lcd density line and you can change the value. try lowering the number by a quarter. see if that helps.
hope that this wasn't too confusing.
Click to expand...
Click to collapse
You could use root explorer...
Procedure is same only you have to open build.prop in edit text mode and resize the value...
If you are using a 4.3 inch smart phone then it would be 240, change by 10 or whatever you like...
Just don't change it to very low value or there will be problem...
Reboot the device and see the change...
Rom: CodeBox 1.4.0 Unofficial
Kernel: Horsepower 3.1 by fuss
If you like my post please hit thanks button...
Black_Prince said:
You could use root explorer...
Procedure is same only you have to open build.prop in edit text mode and resize the value...
If you are using a 4.3 inch smart phone then it would be 240, change by 10 or whatever you like...
Just don't change it to very low value or there will be problem...
Reboot the device and see the change...
Rom: CodeBox 1.4.0 Unofficial
Kernel: Horsepower 3.1 by fuss
If you like my post please hit thanks button...
Click to expand...
Click to collapse
How do you compute for that anyway?
gerickjohn said:
How do you compute for that anyway?
Click to expand...
Click to collapse
I have personally changed my resolution first by changing the values so suggested the values...
Values may be different according to your lcd display setting...
Rom: CodeBox 1.4.0 Unofficial
Kernel : Horsepower 3.1 by fuss
If you like my post please hit thanks button...