Related
Hallo,
First my Englisch istn Perfectly but i have a Big Problem with my Wildfire.
Wildfire:
HBoot :6.01.002
Android: 2.1
I want to install on my phone WildPuzzleROM. But if I want to install it get the following error message:
Installing update...
Amend scripting (update-script) is no longer supported. Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the Clockwork Mod 3.0 Gingerbread based recovery . Please switch to Edify Scritping ( updater-script and update binary) to create working update zip packages
Insallation aborted
If I want to install CyanogenMod 7, it depends on"installing Update"
It does not happen any more.
I can also no longer in my old 2.1 system that is because this has been cleared. So I can only enter the recovery mode. This is, unfortunately, after a certain time if I do nothing.
I need your help because I am going on holiday on Thursday and I desperately need my Wildfire!
I hop you Can help me
Greeting BlackSnow
Can no one help me
I'm having the same problem
Hello,
I am looking firmware for Dapeng A8500 MTK6516 , I have access to recovery for the flash update.zip.
Please, I'm stuck on Android logo (loading ....)
Here is the "Version" information:
BB Chip: MT6516
MS Board: e1013-hjy1ctp
IMEI1:
IMEI2:
Modem Ver.: MAUI.10A.48.MP.V5.F1. 2011/01/27 16:48
Bar Code:
Build Time: 2011 08 20 15:04:44 CST
Uboot Ver.: 2010.06
Kernal Ver.: 2.6.32.9 ([email protected]) (gcc version 4.4.0 (GCC) ) #1 Sat Aug 20 15:03:38 CST 2011
Android Ver.: 2.2.1
SW Ver.: 10YW1048MP
agold info(F4): Sensor Main:gt2005yuv, Sub:gc0309yuv
Lcm:TRULY1P3827(SSD1963.WVGA)-#
thank you very much
I tried to install the update HD9 (MT6516) here:
http://www.filecrop.com/hd9.html
Installation start and there are error !
assert failed :getprop("ro.product.device") =="bird16_a10y"
installation aborted
Click to expand...
Click to collapse
the Dapeng is recognized by Windows but not recognized in the SDK,i cannot extract the informations.
I modified the update-script and the build.prop for rename in e1013_hjy1ctp.
And then re-signed with the signed-ROM ZIP_APK,rename update.zip,flash by recovery but now:
installation aborded
I have finally found
Dapeng technologie :
http://translate.googleusercontent....id=737&usg=ALkJrhhqd4y3wj958gw4WlUEbUxqM-pv3Q
Firmware Android 2.2 and tools Dapeng A8500 :
http://www.mediafire.com/?r2ks2wno5orl9lt
I successfully installed the recovery-update.zip STAR A3000, after boot simply press return/vol+ button to activate the return to confirm action,z4root,root explorer :
http://forum.xda-developers.com/showthread.php?t=1285573
How to flash MT6516 (tested no work on Dapeng A8500,i think the cause is my phone is semi-brick he can not start the Dapeng for the procédure ?) :
http://bm-smartphone-reviews.blogspot.com/2011/02/mtk-hd2-hd9-flashing-tutorial.html
Dapeng A8500 Android 2.3 ??? :
http://translate.googleusercontent....279582&usg=ALkJrhhcEkFeQl2VQL-o7GgSKF_-vgXaJQ
Hello,
I'm looking for how to make an update.zip with this firmware Dapeng.
Or how to extract the system.img of this firmware above.
Thank you for your help and sorry for my BAD English !
I gathered all the conversations in XDA about the Dapeng A8500:
jayguruson said:
Dear XDA Noobs and Gurus,
U have this lousy DaPang Dpad which I want to flash, restore, re-rom and just redo. I have managed to completely unlock it and root it but the rom is not available to be backed up or restored. I checked out the root folders and no rom. I have scoured the web and this forum for valuable information but have come up short...
I am unable to get to fastboot mode or find a rom manager that works with it. IF I press the power button, volume rocker up and the menu button, it takes me to "Factory Mode" which has, "Full Test", "Item Test", "Test Report", "Clear Flash", "Version" and "Reboot". Nothing else. I cannot seem to find a restore screen or find a way to restore/flash the original rom or even a new one. I have done my homework around this issue and if there is someone out there that might help me here, great, if not, I will keep plugging away.
Thank you for any help (in advance). Oh and Happy Holidays (Merry Christmas)!
Click to expand...
Click to collapse
cwkhong said:
wow finally i found someone with the A8500. i hope u guys can do something to this phone, basically to speed up / overclock it. that's all i want. sorry i can't help coz i m a NOOB with android.
---------- Post added at 05:06 AM ---------- Previous post was at 04:56 AM ----------
hey jayguruson if u press vol. up + power u will end up at the recovery mode, where u can flash / install 'update.zip' file. i tried to install DSP (equalizer) and uRevoke (some sort of custom recovery mode but were meant for a certain brand phone) but failed. it just stopped halfway. i also used titanium backup to save a backup file (update.zip..inside there is a META-INF and data files, is this the rom backup file?).
Click to expand...
Click to collapse
pyan68 said:
I finally decided to look at the datasheet after I couldn't find any useful info to overclock MT6516, & I don't think it can be done. MT6516's max speed is 416Mhz (not 460Mhz) and it's already set to run max speed by default. Even if we manage to configure the scaling governor, that would have been futile (unless you want underclocking )
It would be nice to hear opinions from the real experts here though.
Click to expand...
Click to collapse
cwkhong said:
i tried widget overclock. it shows 200+. am i right to assume that is the A8500 speed running. if that is the speed then it can be overclocked, probably to 400 or 500.
i also tried setcpu. it shows a reading of max speed about 500+ but it can't run, always FC.
my understanding is, if the stock rom can be re-packaged (hopefully with a customized 'kernel') and re-flashed back, then the rom will become a customized rom. and all overclock program will only works with a customized rom/kernel.
Click to expand...
Click to collapse
Spain forum :
http://translate.google.fr/translat...ro/forums/49-ROMs-Android-(61-1285)VSa&anno=2
Russian forum :
http://www.4pda.ws/forum/index.php?showtopic=273372
French forum :
http://forums.clones-chinois.com/sujet-1946-firmware-dapeng-a8500.html
update zip file
here's the titanium backup update zip file for whoever can make use of it. i m not very sure if it is the original rom file. i created it with titanium backup pro.
http://www.4shared.com/folder/q7JWoBJX/_online.html
i m also not very sure of this upload file. 1st time doing this uploading. i can't upload with megaupload and a few other becos my country malaysia had blocked those sites. so i hope those who have files for sharing can also upload to 4share. tq
Hi cwkhong ,
to start thank you,but the files that are needed is not in the update.zip titanium.
If you want, I will explain how to quickly extract the whole system of Dapeng it's very easy because I need it urgently
1)you need rooted your Dapeng with z4root in Dapeng tools :
(after installed z4root,execute click on permanent root and after the Dapeng re-boot and you rooted)
2)you need install RootExplorer in Dapeng tools.
3)Open RootExplorer and copy the file system (for copy you need long press on the file)
4)open file sdcard in RootEplorer and past,wait for the copy
5) you upload the file system
(Have no fear, no personal data is in system)
There is another way to extract all: boot.img, system, recovery.
This method by the SDK is very interesting in the future if you want to manipulate the system Dapeng and see many other things.
I think I'll need (boot.img) to create an update.zip for recovery by the Dapeng and to provide a ROM for other people who have blocked their Dapeng A8500.
1)you need rooted your Dapeng with z4root here in Dapeng tools :
(after installed z4root,execute click on permanent root and after the Dapeng re-boot and you rooted)
2)you need install the SDK on your PC,just copy SDK file in C:/ :
3)you go in Dapeng and active "débogage USB"in Paramètres/applications/développement.
4)now you follow this tutorial :
http://www.addictivetips.com/mobile...es-boot-recovery-and-system-partition-images/
Dapeng Tools :
http://www.mediafire.com/?rls7dii268spt6g
SDK :
http://developer.android.com/sdk/index.html
Merci beaucoup (Really thank you)
Et Bonne Année 2012 a la Malaysie de France
I tried to create with system HD9 test update.zip signed but an error with the installation.
Installation aborded
Click to expand...
Click to collapse
ok here is the file (/system) that i copied, i hope this is the one. http://www.4shared.com/zip/Y6wSPyz6/system.html
r u going to create a custom rom? or u unpack, edit, repack and reflash? so that means after this the phone can be overclock?
maybe u teach me how to unpack and repack the rom. i want clean out all those bloatware/rubbish in the original rom to become a clean light rom.
what is the 'recovery-update.zip' file i found in ur Star tools? is that a custom recovery mode that will overide the stock one?
i really hope u can make it. good luck
I tried to create with your system test update.zip signed but he start and after an error with the installation.
test-update.zip :
http://www.mediafire.com/?t131192nh9zjipz
-- Installing: /sdcard/test-update.zip
E:no misc partition
Finding update package...
I:Update location: /sdcard/test-update.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "e1013_hjy1ctp" ||
getprop("ro.build.product") == "e1013_hjy1ctp"
assert failed: getprop("ro.product.device") == "e1013_hjy1ctp" || getprop("ro.build.product") == "e1013_hjy1ctp"
E:Error in /sdcard/test-update.zip
(Status 7)
Installation aborted.
E:no misc partition
Click to expand...
Click to collapse
edit :To enter the recovery press Power+Vol + or Vol-
what now
sorry u didn't succeed in whatever u were doing. what now, friend? it is pretty quiet in here, don't u think so? just u n me...ha ha.
ok here is a query. i want to install/flash zip files from recovery mode but always ABORTED. i think it is becos those files r not SIGNED. how can i install/flash a custom recovery mode (like unRevoke or CLOCKWORK) over the stock one which will have a option of SIGNED or UNSIGNED zip files?
Hi,
I have Dapeng T8500 and i would like to replace the java to android.
Do i use this method please ?
whether i want to flash the rom how to put it into recovery mode ? (I have no flash cable and i would like to nflash by the sd)
Could you please help me ?
Thank
---------- Post added at 09:30 PM ---------- Previous post was at 09:07 PM ----------
Hi
I Have Dapeng T8500 with JAVA.
I don't know how to turn it into recovery mode. I use to press Power+Vol + or Vol-
but nothing happen. What can i do?
Thank
cwkhong said:
sorry u didn't succeed in whatever u were doing. what now, friend? it is pretty quiet in here, don't u think so? just u n me...ha ha.
ok here is a query. i want to install/flash zip files from recovery mode but always ABORTED. i think it is becos those files r not SIGNED. how can i install/flash a custom recovery mode (like unRevoke or CLOCKWORK) over the stock one which will have a option of SIGNED or UNSIGNED zip files?
Click to expand...
Click to collapse
Hi,
in the Dapeng tools there is a clockrecovery-update.zip, renamed update.zip, you copy your SD and get into the recovery to original flash update.zip.
Then to activate the button return to confirm press: Vol + and return to activate the confirmation button with return key.(insist if not work)
Now not need to sign update.zip for this clockrecovery but is tempory after re-boot not installed, look here:
http://forum.xda-developers.com/showthread.php?t=1285573
see you soon
speakers issue
hello there it's been awhile, any development?
anyway i wonder if there is a way to adjust the phone speakers setting, front and back. i find the sound loud but distorted, very high pitch near crackling. or maybe it is the speakers itself, poor quality. if so, is it possible to replace the speakers on my own without sending to phone shop. i have a few old phones with okay speaker quality.
that's it?
so nothing? it is frustrating to see improvements on those A1000,A2000,A3000..etc but nothing for A8500. guess i'll just use it as a phone, what a shame.
hi, i see you have updated the firmware to A8500 android 2.2 sucessfully.i just checked there is a upgrade version of A8500, called A8500+, it is android 2.3 with MTK6573, do you know whether your firmware can work in this phone?
2.3 update?
where is that a8500 2.3 update? my phone is mt6516. its different fr mt 6573 probably lower cpu. can u explain how to update?
Phone switch off when screen timed out
Hi,
I'm new to the forum. I have a chinese 5" tab cum dual sim phone branded as GAOLIN L5. The "Version" information:
BB Chip: MT6516
MS Board: bird16_a10y
IMEI1:
IMEI2:
Modem Ver.: MAUI.10A.W10.48.MP.V5.F1. 2011/01/27 16:48
Bar Code: 031400002704
Build Time: Fri Jun 24 11:18:08 EDT 2011
Uboot Ver.: 2010.06
Kernal Ver.: 2.6.32.9 ([email protected]) (gcc version 4.4.0 (GCC) ) #1 Fri Jun 24 10:39:23 EDT 2011
Android Ver.: 2.2.1
SW Ver.: 10YW1048MP
The phone goes off whenever the screen is timed out (say display time out at 30 seconds, then the phone shut off automatically after 30 seconds). Even, if I press the power off button to turn off the display, the phone goes off and never switched on pressing the power button. To switch on the phone, I have to re-insert the battery and then press the power on button.
Please advice me how to set the screen time out and power on problem. thanks.
Dapeng A8500+ MT6573 Bricked solid
Hi Bruno,
I happily used the phone for about seven months.
Everything was great until I installed ROM Tool Box, and as soon I installed some larger system font, the phone died instant death. I've tried flashing tools but, by using half a knowledge combined with even lesser:silly: patience, the result is that now I can't even get to the new Android boot logo. Here are the ROM details:
MS Board: e1103_v73_hjy1ctp
UBoot Ver.: 2010.06
Kernel Ver.:
2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Mon Mar 19 12:30:44 CST 2012
Android Ver.: 2.3.6
SW Ver. : ALPS.GB.FDD2.MP.V4.5
Custom Build : 1332139481.
I'm fully prepared to make a donation to enable you to carry on your great work for the community. One also must pay for the foolishness.
Best,
Lev.
Help Me
I also have problems with the phone model. Please help me. A8500
here's the problem :
installed
xp sp3
vs 2010 ultimate
monoandroid 4.0.1
installer_r18-windows
- android 4.0.3 (API 15)
- android 4.0 (API 14)
- android 2.2 (API 8)
LGDrivers (I think, that is not necessary)
after i create the default app (with Button and click) in VS 2010
1. run with no debugger
( I try with both API 14 and API 8 too )
And I get :
name.name.apk
name.name-Signed.apk
2. adb install -r name.name-Signed.apk
i receive a text saying "success" and it works on my emulator
BUT
when I run this on my LG GT540 currently running 2.3.7 version I get a message saying:
application has unexpectedly stopped ..
I also tried copying the apk to the phones sdcard and it still didnt work and i also rebooted the phone after instaling the app.
what am i doing wrong ?
why do i get a double name for my app ?
I wont give up from mono for android. Its wonderful and new for me like C# programmer.
I only wont to see default mono app running on my mobile device.
hello I have a problem with my Tab A700
I look cwm.recovrery.jb.img
but I find nothing
al has instead I find stock recovrery ( Image Version:
Acer_AV051_A701_RV05RC08_EMEA_DE )
AC load the cwm but imposible to install a rom ca me but every time I get an error partition.size = [__ PROP_UNDEFINED__ ] Installation aborted .
I find no consistent Roma help me please I go through a translator so desolated
Hello guys, welcome again to my thread
this thread will be my tutorial too for reminder how to reinstalling my Nubia Red Magic 3
i will tell you how to do step by step guide how to do clean Install :
Requirement :
- ADB installed, check with command
Bash:
adb devices
Download all needed first :
First download ROM here V3.34 : http://romdownload.nubia.com/红魔3/V3.34/NX629J-update.zip
// android 11 is not stable yet, there is a lot of function like gyro and other sensor that not working
After that download TWRP here, https://forum.xda-developers.com/t/...twrp-for-nubia-red-magic-3-3s-stable.3962482/
then download Magisk APK : https://magiskmanager.com/
create a zip file from Magisk.apk -> Magisk.zip, we need both of them
then download NIK GAPPS NikGapps-core-arm64-10-20210424-signed.zip and nikgapps config, https://sourceforge.net/projects/nikgapps/files/
download nik gapps, Releases > 23 April 2021 > NikGapps-full-arm64-10-20210423-signed.zip > https://sourceforge.net/projects/ni...ps-full-arm64-10-20210423-signed.zip/download
download nik gapps config, Relaases > Config > nikgapps.config > https://sourceforge.net/projects/nikgapps/files/Releases/Config/nikgapps-config/
After download, do this carefully step by step :
Bash:
# go to download folder
cd ~/Downloads
# now on android, Settings > About Phone > click Build Number 5 times
# go to developer options with usb debugging enable
# Settings > Advanced Settings > Developers Option > Enable toggle USB Debugging > Enable toggle OEM Unlocking
# push ROM file to adb
adb push NX629J-update.zip /storage/emulated/0/
# after push go to your android,
# go to Settings > System Update > pick "..." 3 dot on top right corner > Local Update
# then install Choose from local and pick NX629J-update.zip
# Install
# now on android, after all ROM installed successful do unlock developer options
# Settings > About Phone > click Build Number 5 times
# go to developer options with usb debugging enable
# Settings > Advanced Settings > Developers Option > Enable toggle USB Debugging > Enable toggle OEM Unlocking
# then reboot to bootloader
adb reboot bootloader
# then do unlock and flash twrp
fastboot devices
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash recovery twrp-3.3.1-3-NX629J-mauronofrio.img
# and now twrp was installed, reboot with command below
# now we need to clean ROM installing
adb reboot recovery
# now on android, you can see twrp menu
# go to Wipe > Advanced Wipe > check all of thing in there
# check Dalvik/Art Cache
# check Cache
# check System
# check Vendor
# check Data
# check Internal Storage
# and "Swipe to Wipe" dont do reboot here!!! please dont do
# now push ROM zip again in twrp,
adb push NX629J-update.zip /
# if it cannot mount or said read only file system
# this step if error only !!
adb shell
# you will goin to android sh, run command mount
mount -o rw,remount /
exit
# you will goin to your shell again, do push zip again
adb push NX629J-update.zip /
# after your push now you need to enable read access again on /
adb shell
mount -o ro,remount /
exit
# now on twrp, go to Install > go to / directory, just pick "up a level" until its gone,
# and on / folder you will see NX629J-update.zip,
# and do install on NX629J-update.zip > "swipe to install"
# it will fill data on that we are wiping off
# then push Magisk.zip
adb push Magisk.zip /
# now on twrp, go to Install > go to / directory > install Magisk.zip
# then push
adb push NikGapps-core-arm64-10-20210424-signed.zip /
adb push nikgapps.config /
# now on twrp, go to Install > go to / directory > pick NikGapps-core-arm64-10-20210424-signed.zip
# > "swipe to install" > "wipe dalvik cache/cache"
# reboot to system now
adb reboot
# after you see launcher screen, do install Magisk.apk
adb install Magisk.apk
# popup will be shown on screen, and click "OK"
Now you get clean Install CN ROM with all working feature
- Disable cover detection on Screen
Settings > Lockscreen, Launcher and Theme > Toggle disable "pocket mode"
- Disable Recommeded Application
Settings > Lockscreen, Launcher and Theme > Launcher Setting > Toggle disable ["Fancy Icon", "show the first screen negative", "Recommended Applications"]
Done.
If anything mistakes happen let me know ya.
Not Working :
- Google services Push Notif on Lock Screen, bug hunter @Faonee
[Guide][Stable] How to clean Install CN ROM + TWRP + ROOT + GAPPS on our Nubia Red Magic 3
Hello guys, welcome again to my thread this thread will be my tutorial too for reminder how to reinstalling my Nubia Red Magic 3 i will tell you how to do step by step guide how to do clean Install : Requirement : - ADB installed, check with...
forum.xda-developers.com
Credit :
@Secretcow
[Guide] Unlocking Red Magic 3's Bootloader
Requirements: - To Unlock Bootloader On Nubia Red Magic 3 (NX629J), you will need a computer. - Charge the Nubia Red Magic to at least 50%. - You need a USB cable to connect your phone to PC. (Users reported better luck with usb 2.0 port vs usb...
forum.xda-developers.com
[Guide] Flashing TWRP & Granting Root Access (Magisk Systemless) - Red Magic 3
Use this guide to root for now for global rom: https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 Requirements: - Unlocked Bootloader On Nubia Red Magic 3 (NX629J)...
forum.xda-developers.com
Well sure I'm goona do this...well I'm waiting for the new update 红魔3/红魔3S Android R V5.14 coming soon.....
NubiaNinja said:
Well sure I'm goona do this...well I'm waiting for the new update 红魔3/红魔3S Android R V5.14 coming soon.....
Click to expand...
Click to collapse
I am not sure v5.14 is already stable yet, cause if we see v3 and v2, there is a lot of changes until it stable.
And there must plenty degraded performance instead of android 10. Cause I got AnTuTu only 450k on Android R on Rom v5.1x
never00miss said:
I am not sure v5.14 is already stable yet, cause if we see v3 and v2, there is a lot of changes until it stable.
And there must plenty degraded performance instead of android 10. Cause I got AnTuTu only 450k on Android R on Rom v5.1x
Click to expand...
Click to collapse
Yes @never00miss you were are saying right I think I'm only one who think observed feel the best update was of CN V3.34 Android 10 OF R3,but mine was something 3.04/3.09/3.11 OF R3S I can't remember ??but sure it was android 10 bruh ur saying right...review I'm playing pubg mobile for almost 12 hrs continuosly on this update V3.34 played till almost next update comes.With 90fps game mode on fan speed normal I remember I don't feel any issue lagging, shuttering or any kind of fps down and sometimes I recording too my gameplays making short clips of engaging on fights..well no problem BUT only problem I face was Render in game heavy for a bit of moment then I decided I have to upgraded to Android 11 I think so game needed but this is the time I upgraded by OTA means phone update push the new one V5.11 which was failed version of Android 11 full of bugs I used for some days then I can't play pubg mobile not running game launcher malfunctioning screen flickers and many bugs nevermind I make my mind to return back to android 10 well I think I have to put the 3.34 zip to internal storage like simple way of reboot to recovery by inbuilt recovery wipe/data/cache boom I started installing zip lol who knows the Android 11 new policy added anti-rollback...system Lol DEVICE BRICKEDDDDDD!This is Nubia fail! At that moment I knew I f_____up!
Wait for 1-2 week dead phone....since whole Chinese community of Nubia Redmagic3/3S Flooded and crying in Chinese forum then the GOD ENTERS THE CHAT "SCARLETT GLASS" POSTED SOMETHING A RECOVERY TOOL Then the issue solved TWRP flashed since then I rooted checking gsi roms and new updates V5.11 Rebrushed and rightnow I'm on V5.13 but truely I'm saying my honestly review I don't like ANDROID 11 I can't play for long periods maximum 3-4hours pubg heating so much lagging and shuttering occurs! Device heat so much exceed sometimes 50 degrees lol I don't want to lost my precious hands I don't have girlfriend yet! Lol..... I'm afraid to play for long time!
GO FOR V3.34 PEOPLES WHO LOOK.....THIS POST WELL people this is the #Antutu Score of my Android 11 CN V5.13 NUBIA REDMAGIC 3S Well this score is due to SD 855+ I think so so...never mind YOU CAN SEE THE DIFFERENCE SCORE OF R3 AND R3S CPU AN D GPU R3 WINS....
R3S Has more scored but R3 have some stability...so V3.34 wins! Even Chinese forum people confirm V3.34 was best!
note: I can't remember which version I was running on android 10 I forgot 3.04/3.09/3.11??
sorry..on my RM3S but android 10
This works on both version of RM3 right?
NubiaNinja said:
Yes @never00miss you were are saying right I think I'm only one who think observed feel the best update was of CN V3.34 Android 10 OF R3,but mine was something 3.04/3.09/3.11 OF R3S I can't remember ??but sure it was android 10 bruh ur saying right...review I'm playing pubg mobile for almost 12 hrs continuosly on this update V3.34 played till almost next update comes.With 90fps game mode on fan speed normal I remember I don't feel any issue lagging, shuttering or any kind of fps down and sometimes I recording too my gameplays making short clips of engaging on fights..well no problem BUT only problem I face was Render in game heavy for a bit of moment then I decided I have to upgraded to Android 11 I think so game needed but this is the time I upgraded by OTA means phone update push the new one V5.11 which was failed version of Android 11 full of bugs I used for some days then I can't play pubg mobile not running game launcher malfunctioning screen flickers and many bugs nevermind I make my mind to return back to android 10 well I think I have to put the 3.34 zip to internal storage like simple way of reboot to recovery by inbuilt recovery wipe/data/cache boom I started installing zip lol who knows the Android 11 new policy added anti-rollback...system Lol DEVICE BRICKEDDDDDD!This is Nubia fail! At that moment I knew I f_____up!
Wait for 1-2 week dead phone....since whole Chinese community of Nubia Redmagic3/3S Flooded and crying in Chinese forum then the GOD ENTERS THE CHAT "SCARLETT GLASS" POSTED SOMETHING A RECOVERY TOOL Then the issue solved TWRP flashed since then I rooted checking gsi roms and new updates V5.11 Rebrushed and rightnow I'm on V5.13 but truely I'm saying my honestly review I don't like ANDROID 11 I can't play for long periods maximum 3-4hours pubg heating so much lagging and shuttering occurs! Device heat so much exceed sometimes 50 degrees lol I don't want to lost my precious hands I don't have girlfriend yet! Lol..... I'm afraid to play for long time!
GO FOR V3.34 PEOPLES WHO LOOK.....THIS POST WELL people this is the #Antutu Score of my Android 11 CN V5.13 NUBIA REDMAGIC 3S Well this score is due to SD 855+ I think so so...never mind YOU CAN SEE THE DIFFERENCE SCORE OF R3 AND R3S CPU AN D GPU R3 WINS....
R3S Has more scored but R3 have some stability...so V3.34 wins! Even Chinese forum people confirm V3.34 was best!
note: I can't remember which version I was running on android 10 I forgot 3.04/3.09/3.11??
sorry..on my RM3S but android 10
Click to expand...
Click to collapse
No, you got it wrong on AnTuTu version, you are run on v9 AnTuTu that on my device it will get score on 588k, on you are on 536k
You can see the results on my thread, in this thread I am using v5.13
[OVERCLOCK] GPU overclocking | Upgrade your Red Magic 3 to Red Magic 3s | Unleash the Beast
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!! i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021. Goals : for overclock and unleash all inside...
forum.xda-developers.com
Faonee said:
This works on both version of RM3 right?
Click to expand...
Click to collapse
Yup, correct, both RM3 and RM3s works very well
never00miss said:
No, you got it wrong on AnTuTu version, you are run on v9 AnTuTu that on my device it will get score on 588k, on you are on 536k
You can see the results on my thread, in this thread I am using v5.13
[OVERCLOCK] GPU overclocking | Upgrade your Red Magic 3 to Red Magic 3s | Unleash the Beast
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!! i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021. Goals : for overclock and unleash all inside...
forum.xda-developers.com
Yup, correct, both RM3 and RM3s works very well
Click to expand...
Click to collapse
never00miss said:
No, you got it wrong on AnTuTu version, you are run on v9 AnTuTu that on my device it will get score on 588k, on you are on 536k
You can see the results on my thread, in this thread I am using v5.13
[OVERCLOCK] GPU overclocking | Upgrade your Red Magic 3 to Red Magic 3s | Unleash the Beast
Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!! i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021. Goals : for overclock and unleash all inside...
forum.xda-developers.com
Yup, correct, both RM3 and RM3s works very well
Click to expand...
Click to collapse
Yes, I looked at the thread carefully but you haven't mentioned that we RM3S users can also apply this method...for overclock well I have to try it first...lol I think that thread is only for RM3 users... Sorry. Yeah V9 Antutu was score is damnn soo good.... Lesss goooo.....
NubiaNinja said:
Yes, I looked at the thread carefully but you haven't mentioned that we RM3S users can also apply this method...for overclock well I have to try it first...lol I think that thread is only for RM3 users... Sorry. Yeah V9 Antutu was score is damnn soo good.... Lesss goooo.....
Click to expand...
Click to collapse
Cause konabess process is unpacking binary on boot.img and re-compiling again, and boot.img it's same on all CN ROM that working on both devices RM3 and RM3s
I've installed everything succesfully. Only one thing thats bugging me that app notification doesn't show up on the lockscreen. I've tried disabling and enabling lockscreen notification but still not showing.
Faonee said:
I've installed everything succesfully. Only one thing thats bugging me that app notification doesn't show up on the lockscreen. I've tried disabling and enabling lockscreen notification but still not showing
Click to expand...
Click to collapse
ZTE have their own SDK for showing push notification info on their lock screen, and not all of apps support this lock screen info and integrate ZTE notification SDK.
So this problem depends on developer of apps, or ZTE must develop to allow all notification showing in locks screen and allow Google play services to show notification on lock Screen, * this is impossible yet cause of china vs us regulations for integrating gapps.
You can go on notification, Settings > Notification and status Bar > Notification Management > System, a lot of apps provided by CN ROM is supported by showing notif on lock screen. But in third party apps is not showing advanced feature to show notif on lock screen
*For reminder who's people is installing CN ROM, google services SDK feature like push notification (fcm) Or anything relate will not supported by apps in CN ROM it self. if you wanna working push notification and supported by system apps, you need to install from ZTE appcenter
never00miss said:
ZTE have their own SDK for showing push notification info on their lock screen, and not all of apps support this lock screen info and integrate ZTE notification SDK.
So this problem depends on developer of apps, or ZTE must develop to allow all notification showing in locks screen and allow Google play services to show notification on lock Screen, * this is impossible yet cause of china vs us regulations for integrating gapps.
You can go on notification, Settings > Notification and status Bar > Notification Management > System, a lot of apps provided by CN ROM is supported by showing notif on lock screen. But in third party apps is not showing advanced feature to show notif on lock screen
*For reminder who's people is installing CN ROM, google services SDK feature like push notification (fcm) Or anything relate will not supported by apps in CN ROM it self. if you wanna working push notification and supported by system apps, you need to install from ZTE appcenter
Click to expand...
Click to collapse
Thanks for the reply. Well that sucks. Need to get used to it somehow Haha.
Can you please write a guide to install android 11? I know it got bugs but I want to try it once atleast
souma_rox said:
Can you please write a guide to install android 11? I know it got bugs but I want to try it once atleast
Click to expand...
Click to collapse
Same as this tutorial "maybe", cause a lot of update on ZTE CN ROM flashable via TWRP.
You just need to change from v3.3x zip to v5.1x zip and flash on TWRP.
And what's said by @mauronofrio that TWRP only works again Chinese bootloader, so its "maybe" possible to flash CN ROM via twrp
Adb comand doesn't work for me.
Amuror3z said:
Adb comand doesn't work for me.
Click to expand...
Click to collapse
whut?? you need to make sure your adb installed well bruh.
Can we use the ok google hotword in the CN rom?
souma_rox said:
Can we use the ok google hotword in the CN rom?
Click to expand...
Click to collapse
You need to install full pack of nikgapps to get google assistant
I'm not sure what I'm doing wrong. I got Magisk to work and I have the rom up and running, but google play store doesn't seem to work. Which version exactly do I need to flash?
hidelater said:
I'm not sure what I'm doing wrong. I got Magisk to work and I have the rom up and running, but google play store doesn't seem to work. Which version exactly do I need to flash?
Click to expand...
Click to collapse
NIK GAPPS NikGapps-core-arm64-10-20210424-signed.zip
heya, nice guide.
just wanted to notify you that if you want to install the 3.34 cn rom / global rom from inside twrp, you might get a zip error.
to fix this, simply delete compatibility.zip from inside the NX629J-update.zip
under linux you can do this simply with "zip -d NX629J-update.zip compatibility.zip".
unpacking/repacking the zip is not advised
edit: seems this is only a thing if you try to flash from android 11 (v5.14) to android 10 (v3.34)
oh and the "adb reboot recovery" command (after flashing twrp) wont work since you are in fastboot mode during that step, "fastboot reboot recovery" might work