Hi everybody,
my question is too easy.
If i'm superCID with a installed a ROM with latest leaked ICS 4.0.3 and the new HBOOT 1.23, how can i go back to original Gingerbread firmware.
Is enought to flash an official GB RUU or i got something else to do?
Thanks a lot!
ilbulgaro89 said:
Hi everybody,
my question is too easy.
If i'm superCID with a installed a ROM with latest leaked ICS 4.0.3 and the new HBOOT 1.23, how can i go back to original Gingerbread firmware.
Is enought to flash an official GB RUU or i got something else to do?
Thanks a lot!
Click to expand...
Click to collapse
Hi,
People have reported good things about keeping the ICS firmware on GB.
Try it and see.
If you must go back,you can get 1.17 HERE
Related
Hi all
I'm about to sell my Sensation XE.
I used to run InsertCoin 4.5 with the 3.24 firmware.
My question is simple: can I go back to a shipped Pyramid stock rom without downgrading the firmware or is it more...complex?
Thanks in advance
dd66 said:
Hi all
I'm about to sell my Sensation XE.
I used to run InsertCoin 4.5 with the 3.24 firmware.
My question is simple: can I go back to a shipped Pyramid stock rom without downgrading the firmware or is it more...complex?
Thanks in advance
Click to expand...
Click to collapse
Hi,
I have not done this myself,but someone HERE ,in post # 3604,seems to have done what you are asking.
Hi everyone!! Have a question to ask and was wondering if anyone could help.
Right so this my situation:
I own a HTC Sensation XE, I have S-OFF, Rooted and SuperCID.
So basically i'm all set for custom roms (gingerbread ones anyway).
I have also installed a custom rom (Pyramid3D v8.3.0 - gingerbread based).
Now I am considering upgrading and installing a ICS based custom rom, however it appears that in order to use the ICS based roms, I have to flash new firmware.
Now I have no problem with doing that, I understand how to do that.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Will a gingerbread rom work fine with the newer firmware?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
Is the downgrade as simple as installing any other rom? - if that possible
Thanks in advance for help you guys can give!! Appreciate it!!
dontmess said:
Hi everyone!! Have a question to ask and was wondering if anyone could help.
Right so this my situation:
I own a HTC Sensation XE, I have S-OFF, Rooted and SuperCID.
So basically i'm all set for custom roms (gingerbread ones anyway).
I have also installed a custom rom (Pyramid3D v8.3.0 - gingerbread based).
Now I am considering upgrading and installing a ICS based custom rom, however it appears that in order to use the ICS based roms, I have to flash new firmware.
Now I have no problem with doing that, I understand how to do that.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Click to expand...
Click to collapse
Only if you have a GB compatible firmware installed.
Will a gingerbread rom work fine with the newer firmware?
Click to expand...
Click to collapse
Depends, 1.23 (from 3.12) should work fine. 1.27 (from 3.24) won't.
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
Click to expand...
Click to collapse
You'll need HBOOT 1.23 or 1.17 to boot GB ROMs. I used 1.23 for a while with ICS and CM7. I've only recently gone to the unlocked 1.27 F/W, seems more stable on ICS. I think I noticed a battery life benefit with CM7 & 1.23, so an advantage.
Is the downgrade as simple as installing any other rom? - if that possible
Click to expand...
Click to collapse
You need to do it via the PG58IMG.zip method rather than recovery.
Thanks in advance for help you guys can give!! Appreciate it!!
Click to expand...
Click to collapse
dontmess said:
Hi everyone!! Have a question to ask and was wondering if anyone could help.
Right so this my situation:
I own a HTC Sensation XE, I have S-OFF, Rooted and SuperCID.
So basically i'm all set for custom roms (gingerbread ones anyway).
I have also installed a custom rom (Pyramid3D v8.3.0 - gingerbread based).
Now I am considering upgrading and installing a ICS based custom rom, however it appears that in order to use the ICS based roms, I have to flash new firmware.
Now I have no problem with doing that, I understand how to do that.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Will a gingerbread rom work fine with the newer firmware?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
Is the downgrade as simple as installing any other rom? - if that possible
Thanks in advance for help you guys can give!! Appreciate it!!
Click to expand...
Click to collapse
Short answers to your questions:
Yes - but you need to downgrade the firmware
No
Yes
You can't use new firmware with Gingerbread
Yes
Detailed stuff can be found in this most helpful post: http://forum.xda-developers.com/showthread.php?t=1480061
I think you'll find it worthwhile to move to ICS. Good luck.
edit: Doh! Missed it by that much....
cr1960 said:
Short answers to your questions:
Yes - but you need to downgrade the firmware
No
Yes
You can't use new firmware with Gingerbread
Yes
Detailed stuff can be found in this most helpful post: http://forum.xda-developers.com/showthread.php?t=1480061
I think you'll find it worthwhile to move to ICS. Good luck.
Click to expand...
Click to collapse
+1 on the move to ICS.
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Only if you have a GB compatible firmware installed.
So if I was to install 3.24 then GB roms most likely wouldn't work?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
You'll need HBOOT 1.23 or 1.17 to boot GB ROMs. I used 1.23 for a while with ICS and CM7. I've only recently gone to the unlocked 1.27 F/W, seems more stable on ICS.
So 1.23 is the best bet if I want to "try" ICS and then can go back if I choose
Another question which I also have then is:
Some ICS roms say that they require firmware 3.24. To clarify, If I install this firmware and an ICS rom, there will be no way for me then install most GB roms (broadly speaking).
dontmess said:
My question is:
If I upgrade the firmware and install an ICS based custom rom, but for whatever reason I do not like it, can I then simple downgrade back to a gingerbread rom?
Only if you have a GB compatible firmware installed.
So if I was to install 3.24 then GB roms most likely wouldn't work?
Do I have to downgrade the firmware back?
Is there any disadvantage to using the newer firmware on gingerbread if possible?
You'll need HBOOT 1.23 or 1.17 to boot GB ROMs. I used 1.23 for a while with ICS and CM7. I've only recently gone to the unlocked 1.27 F/W, seems more stable on ICS.
So 1.23 is the best bet if I want to "try" ICS and then can go back if I choose
Another question which I also have then is:
Some ICS roms say that they require firmware 3.24. To clarify, If I install this firmware and an ICS rom, there will be no way for me then install most GB roms (broadly speaking).
Click to expand...
Click to collapse
From the thread: http://forum.xda-developers.com/showthread.php?t=1459767
You can reflash an earlier F/W so go back to 1.17, as always if it screws up it screws up. It's the sort of thing I tried to avoid where possible, but sometimes is necessary.
One point though, when you flash 1.23 or 1.27 you'll get a new Radio. If you regress the F/W to 1.17 you'll need to flash a compatible Radio as well.
You "should" be able to try before you buy ICS on 1.23 and also go back to GB. That said, I've found my current combo (VI 3.0.5b7 and 1.27.1100) more stable than an earlier version of the ROM was on 1.23.
Another question which I also have then is:
Some ICS roms say that they require firmware 3.24. To clarify, If I install this firmware and an ICS rom, there will be no way for me then install most GB roms (broadly speaking).
Click to expand...
Click to collapse
NO GB on this F/W
Hi every one, I have recently purchased an HTC Sensation XE. I have read and done all the tips several times regarding S-off, Super CID, Rooting. I have S-off and rooted the device. My CID 111111. I don't know why somehow I can only install OrDroid 1.6.1, and upgrade to OrDroid 1.6.2 only and no other ROMs. Could anyone possibly help me to see where I am going wrong? Thank you in advance.
Make sure ur firmware is 3.32 ...
And some phones get.bootlop.bcoz. of the oc kernel make sure u get the one without oc
Than try insertcoin beta 12 works great since u using sense 4.0
Sent from my HTC Sensation Z710e using xda premium
pop1290 said:
Hi every one, I have recently purchased an HTC Sensation XE. I have read and done all the tips several times regarding S-off, Super CID, Rooting. I have S-off and rooted the device. My CID 111111. I don't know why somehow I can only install OrDroid 1.6.1, and upgrade to OrDroid 1.6.2 only and no other ROMs. Could anyone possibly help me to see where I am going wrong? Thank you in advance.
Click to expand...
Click to collapse
What firmware is in your bootloader? When you are flashing a rom and it requires a specific Firmware you will need to update that firmware to that roms requirements. First time Flashing also requires a full wipe. . There is a firmware thread in sensation development and how to's. Example.. If i want sense 3.6 rom or new 4.0 rom I would flash firmware 3.32. If your not sure how firmware flashes read up on it. It can cause bootloops if your not flashing the proper zips. Welcome to the world of SENSATION..
mckellick said:
What firmware is in your bootloader? When you are flashing a rom and it requires a specific Firmware you will need to update that firmware to that roms requirements. First time Flashing also requires a full wipe. . There is a firmware thread in sensation development and how to's. Example.. If i want sense 3.6 rom or new 4.0 rom I would flash firmware 3.32. If your not sure how firmware flashes read up on it. It can cause bootloops if your not flashing the proper zips. Welcome to the world of SENSATION..
Click to expand...
Click to collapse
Thanks again, My firmware is 3.32 . I have followed the instruction on
http://forum.xda-developers.com/showthread.php?t=1459767
several times but no luck. I flashed ROM InsertCoin it is working perfect. but still no luck with other roms. to be more specific for example I would like to flash ROM : Android Revolution HD™ 6.5.2 | ICS |
Flashed Firmware 3.32 , and then the ROM, I still get loop.
pop1290 said:
Thanks again, My firmware is 3.32 . I have followed the instruction on
http://forum.xda-developers.com/showthread.php?t=1459767
several times but no luck. I flashed ROM InsertCoin it is working perfect. but still no luck with other roms. to be more specific for example I would like to flash ROM : Android Revolution HD™ 6.5.2 | ICS |
Flashed Firmware 3.32 , and then the ROM, I still get loop.
Click to expand...
Click to collapse
Hey pop did ya delete the firmware file you flashed right after you updated it into bootloader? Usually that PG58IMG which would be your firmware file zip should be deleted off your SDcard right after you bootloaded it. And also let me remind ya that even its a lower firmware like 3.24 or less it will have that same PG58IMG file name saved on your wherever downloaded too. So make sure your installing that correct PG58IMG firmware. Other than that ..try a step down from 3.32 and see if that works with the ARHD Rom.
" The Official Rom Zombie "
sent from the back of the Ice Cream Truck using a killer Sensation
Try the 3.30 firmware. If not just double check to see if you downloaded the right firmware 3.32. Like for me I'm a T-Mobile user so I had to download the T-Mobile version firmware.. hope that helps..
" The Official Rom Zombie "
sent from the back of the Ice Cream Truck using a killer Sensation
I'm not sure if you just mistype it but check you cid again... Looks like you miss one more 1
Sent from my HTC Sensation 4g with Beats Audio
Hey,
I need official HTC Sensation ICS RUU.
I can't use PG58IMG!
I'm S-ON , and can't install any custom ROM with ICS. Maybe I can install GB, but I prefer ICS.
I would like to use ICS, root or unrooted is wayne ^_^
Maybe someone can help me.
That would be great.
Thanks
Pr0tectiveG0ggles said:
Hey,
I need official HTC Sensation ICS RUU.
I can't use PG58IMG!
I'm S-ON , and can't install any custom ROM with ICS. Maybe I can install GB, but I prefer ICS.
I would like to use ICS, root or unrooted is wayne ^_^
Maybe someone can help me.
That would be great.
Thanks
Click to expand...
Click to collapse
Hi,
First you must s-off HERE
For the recovery,use 5.0.2.0 HERE
Then ,get your ROM HERE
And use this guide HERE
A lot of work.
A lot of reading.
Do not skip ANY steps.
Read carefully,and you should be OK.
quick answer - there isn't an official ICS RUU yet, only beta ones
Can't go S-OFF. I'm on HBOOT 1.23, which is unsupported from revolutionary.
There is no official RUU? I thought HTC had released an Official RUU?!
Are there any beta RUU's?
Beta RUUs are in the Shipped-ROMs thread but come with HBOOT 1.27.0000 which you still can't S-OFF - you need to wait for Revolutionary to udpate to get S-OFF
I'm not able to flash an ICS Beta RUU?
My Sensation only have to run, I would like to sell it.
Can't sell it when it's broken x.x
And you can't sell it on a beta RUU either!!! That's just lying to get a sell!
I know.
But I will only that my phone works, maybe I can update in in a while to original and THAN I can sell it
or maybe, I can use it myself! That would be great.
But for now , there's no boot and no function.. I can't use my Sensation!
Hi, Today I got my HTC one mini. I want to flash InsertCoin, but as I heard, it needs Hboot 2.22. I've got 2.21.
I found this Thread:
[FIRMWARE][AT&T 3.10] 2.22 Firmware ( New Partition Layout )
But the Title says AT&T. I'm running Android 4.2.2 which is branded by Vodafone(germany).
Can I still flash it without breaking my Device?
Sorry, I'm new to Hboot updating. Never done this before.
Thanks for your Help
_REDFOX_ said:
Hi, Today I got my HTC one mini. I want to flash InsertCoin, but as I heard, it needs Hboot 2.22. I've got 2.21.
I found this Thread:
[FIRMWARE][AT&T 3.10] 2.22 Firmware ( New Partition Layout )
But the Title says AT&T. I'm running Android 4.2.2 which is branded by Vodafone(germany).
Can I still flash it without breaking my Device?
Sorry, I'm new to Hboot updating. Never done this before.
Thanks for your Help
Click to expand...
Click to collapse
Yes you can flash it longs you have s-off and supercid
Sent from my HTC One mini using Tapatalk
Okay, thanks!