Could anybody please help me in this .
Bought this phone from US (verizon) and trying to run it on Rogers canada network.
I researched it on internet and checked these phones are coming as factory unlock. I have tried changing settings in network mode but its showing me only 2 options
LTE/CDMA and CDMA
i have checked on LTE/CDMA but still its not picking up signals on rogers network. please advice if i need to check anything else
Thanks
bindudhindsa said:
Could anybody please help me in this .
Bought this phone from US (verizon) and trying to run it on Rogers canada network.
I researched it on internet and checked these phones are coming as factory unlock. I have tried changing settings in network mode but its showing me only 2 options
LTE/CDMA and CDMA
i have checked on LTE/CDMA but still its not picking up signals on rogers network. please advice if i need to check anything else
Thanks
Click to expand...
Click to collapse
Ummmmm...Rogers is GSM and the Verizon Galaxy Nexus is CDMA. You can't change it. You can't use a CDMA phone on a GSM network. You can't do it with any Verizon or Sprint phone (besides their global phones). The phone is useless to you. The GSM model ships factory unlocked.
Thanks for your reply, this phone is really confusing to me because unlike all CDMA phones it still accept micro-SIM card. and in network mode it asked me to select LTE/CDMA ..could you please tell me why it is saying LTE ?
bindudhindsa said:
Thanks for your reply, this phone is really confusing to me because unlike all CDMA phones it still accept micro-SIM card. and in network mode it asked me to select LTE/CDMA ..could you please tell me why it is saying LTE ?
Click to expand...
Click to collapse
Verizon uses LTE technology as well.
so this one is CDMA for sure and it will work only on verizon ?
bindudhindsa said:
so this one is CDMA for sure and it will work only on verizon ?
Click to expand...
Click to collapse
Well I haven't seen a picture of it, but if it says Verizon on the phone, then yes, it will only work on Verizon.
Thanks lowandbehold , appreciate your help
Related
I just got off the phone with Telus and what they told me is that they are releasing ANOTHER TP2 on the GSM network and that I would have to buy another phone TP2 just to get onto the GSM network.
This being said, is there any way to modify the radio signal in my CDMA phone to read both CDMA and GSM, or atleast get more speed out of my phone for connectivity to the net?
*update
I just got off the phone with HTC and the lady I spoke with told me, that to change the radio frequency I just had to change the ROM. That being said IF, I put a Telus HSPA ROM on there the phone should be capable of working on the network. Now that being said. If this is possible would it not be possible to run on both networks, CDMA and HSPA, making the signal control software dependent, meaning I have CDMA controls for standard phone calls and HSPA for running the highspeed network?
Update in previous post.
Eazy, just HardSPL and security unlock your radio bro...Only then you can use the GSM networks in your country (I'm guessing it's US)
But you can only activate one at a time. Either GSM only or CDMA only..CMIIW..
Just my 2 cents
Actually it's Canada
Right but if I unlock the phone, and switch it back and forth on and off the networks, how would that affect my account, could I hide the fact i was doing this?
slight22 said:
Actually it's Canada
Right but if I unlock the phone, and switch it back and forth on and off the networks, how would that affect my account, could I hide the fact i was doing this?
Click to expand...
Click to collapse
I have this phone on Telus...I got it unlocked and I put my work sim card in this phone and it's on rogers. I switch networks when necessary....If you get a Telus sim card you would be able to use it GSM.
You should be able to pick which network you use. I saw it in phone settings, I think.
bundybp said:
I have this phone on Telus...I got it unlocked and I put my work sim card in this phone and it's on rogers. I switch networks when necessary....If you get a Telus sim card you would be able to use it GSM.
Click to expand...
Click to collapse
TELUS does not provide GSM at all. They are CDMA and UMTS.
So does this mean its possible. If i have a CDMA Sprint HTC Touch pro 2. That i have the potential of using it on At&t in the US?? All i have to do is unlock it?? Any information would be greatly appreciated.. Thanks!!
And if one does unlock a radio on said Telus phone, can one use both radio frequencies, thus enabling both CDMA and HSPA frequencies?
Spike15 said:
TELUS does not provide GSM at all. They are CDMA and UMTS.
Click to expand...
Click to collapse
So Telus new 3G network is not GSM? It does have drop down menu showing "Send SMS over" GMS and CDMA. GSM is selected by default.
ok, i got some problem with the verizon galaxy s3. I use at&t simcard on this phone and it seems working just fine. Here's a thing, after set apn setting on the phone i just only get edge speed(2g), i need someone helps me to figure out how to get the 3g/4g speed on this phone or give me a right apn setting for this. i really appreciated. thanks very much!
The bands for AT&T 3G/4G are locked on the handset, you are going to have stick on edge sadly!!
djteotancolis said:
The bands for AT&T 3G/4G are locked on the handset, you are going to have stick on edge sadly!!
Click to expand...
Click to collapse
really? so there's no way to unlock these bands? I might consider to resell this phone again. Anyways, thanks for your reply!
hunbemylover said:
really? so there's no way to unlock these bands? I might consider to resell this phone again. Anyways, thanks for your reply!
Click to expand...
Click to collapse
Till now no one figured out how to unlock the bands! so your outta luck..would suggest trading it in for a AT&T phone!
djteotancolis said:
Till now no one figured out how to unlock the bands! so your outta luck..would suggest trading it in for a AT&T phone!
Click to expand...
Click to collapse
It's not a worst thing though. I got this one for only 100$ off craiglist and it works just fine. It just does not work right with a data, remind me of few years back when 2g was a fastest data service lol. Thanks again for let me know this issue.
AT&T runs on GSM band while Verizon runs on a CDMA network. I'm surprised your SIM even works. What other said is correct though, you are restricted to the slow 2G Edge speeds.
DarkMenace said:
AT&T runs on GSM band while Verizon runs on a CDMA network. I'm surprised your SIM even works. What other said is correct though, you are restricted to the slow 2G Edge speeds.
Click to expand...
Click to collapse
Well the S3 is a World phone, hence it comes with GSM bands too! if you hit Europe or Asia you will get 3G
djteotancolis said:
Well the S3 is a World phone, hence it comes with GSM bands too! if you hit Europe or Asia you will get 3G
Click to expand...
Click to collapse
Right it does. But they use different bands in other countries. Our phone isn't capable of using any and all bands. Only certain ones. If somehow these bands were unlocked, then you could get 3g here.
Sent from my SCH-I535 using Tapatalk 4 Beta
I am using the ATT D850 G3 on a sim that supports the LTE band 3 1800mhz network. its running on the stock 5.0.1. It seems to not connect to the lte band. the issue is with the phone. can someone please help fix this.
adnshah said:
I am using the ATT D850 G3 on a sim that supports the LTE band 3 1800mhz network. its running on the stock 5.0.1. It seems to not connect to the lte band. the issue is with the phone. can someone please help fix this.
Click to expand...
Click to collapse
Just at because the sim does the phone might not support that band.
Sent from my iPhone using Tapatalk
hyelton said:
Just at because the sim does the phone might not support that band.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi Hyelton, thank you for your reply. The phone does too, its listed on the specifications and it picks up the band and the network when I do a manual search for available networks. when trying to connect it connects to the HSPA+ network not LTE. I believe this is a limitation that ATT might have added. I need someone help me remove it.
adnshah said:
Hi Hyelton, thank you for your reply. The phone does too, its listed on the specifications and it picks up the band and the network when I do a manual search for available networks. when trying to connect it connects to the HSPA+ network not LTE. I believe this is a limitation that ATT might have added. I need someone help me remove it.
Click to expand...
Click to collapse
AT&T would NOT have a limitation on it. If you do a network search and it comes up, and fails to connect something somewhere else is wrong. Make sure you have the correct APN?
The APN settings have been checked and work fine on a note 3 N9005, somethings up with the d850, can someone help with that please
the phone does, the speck says, roaming 1800 on the att site and even the lg specs say it does. the but i think the stock rom on the att d850 some how prevents it, please help
Hi All,
The issue with my Verizon M8 [the rare LRA (LTE for Rural America) subvariant] is that no matter what firmware version/RUU I use, I only get GSM connectivity on it. No WCDMA or LTE. I have checked the WCDMA bands in my country and that is not an issue. When I select WCDMA only option, I cannot get any signal. I have flashed the all the LRA (*.**.512.*) RUUs as well as all the Verizon (*.**.605.*) RUUs but no luck at all. If this issue might be related to PRL settings then please let me know if any of you have any idea. I have also checked the relevant WCDMA/LTE bands via CDMA tool and they are also enabled.
My M8 is currently S-off and has Super CID. I am using it outside the US on GSM network.
This has got me very frustrating and I need to find out if this is a software issue or a hardware issue. One more thing is that another guy here has exactly the same variant as mine. He bricked his radio by flashing the GSM firmware. I provided him my phone's relevant partition dumps and after flashing those onto his phone, his phone's radio became operational but now he has the same issue as mine. So I think that this issue might not be hardware related.
Any help on this will be greatly appreciated!!
Same problem
Anyone can provide any help on this??
any1 please help??
junaidawan86 said:
any1 please help??
Click to expand...
Click to collapse
do you know the actual bands/frequency the gsm network uses where you are? the prl is going to be pulled from your sim card. have you also tried a diff sim card?
izzaeroth said:
do you know the actual bands/frequency the gsm network uses where you are? the prl is going to be pulled from your sim card. have you also tried a diff sim card?
Click to expand...
Click to collapse
Hello. Yes, I know the bands used by 2G, 3G and 4G in my country. And yes I have switched sim cards even from different networks. The PRL version shows as 00000 when i look at it from the settings. I have even tried to update the PRL from a prl file provided by a xda user in some other thread but still it shows as 00000. I have seen some threads and ppl had this problem with One S. Though some of them were able to correct it by flashing some stock and custom radios.
junaidawan86 said:
Hello. Yes, I know the bands used by 2G, 3G and 4G in my country. And yes I have switched sim cards even from different networks. The PRL version shows as 00000 when i look at it from the settings. I have even tried to update the PRL from a prl file provided by a xda user in some other thread but still it shows as 00000. I have seen some threads and ppl had this problem with One S. Though some of them were able to correct it by flashing some stock and custom radios.
Click to expand...
Click to collapse
odd. i wonder if that lra model is sim locked like the sprint variant. is it also acknowledging you have a sim card inserted when you check in about phone? as in, does it display the sim #
izzaeroth said:
odd. i wonder if that lra model is sim locked like the sprint variant. is it also acknowledging you have a sim card inserted when you check in about phone? as in, does it display the sim #
Click to expand...
Click to collapse
Well, I thought too that it might be sim locked but then why it is working with 2G networks. There should be no signal at all then. Also these LRA variants are being sold by many online retailers including Amazon as sim unlocked phones. And yes it acknowledges when I insert or change a sim. Says "Preparing sim card" and then I get a signal (2G only). When I choose 3G only in network settings, the signal is gone immediately and I have to switch back to auto or 2G only to get the signal back.
@redpoint73
Any help on this???
junaidawan86 said:
Hello. Yes, I know the bands used by 2G, 3G and 4G in my country.
Click to expand...
Click to collapse
So then list the specific band numbers for 2G, 3G, and LTE for your carrier. That is really what the previous response was asking.
redpoint73 said:
So then list the specific band numbers for 2G, 3G, and LTE for your carrier. That is really what the previous response was asking.
Click to expand...
Click to collapse
900/1800MHz for 2G
2100MHz for 3G
850/1800MHz for 4G/LTE
junaidawan86 said:
900/1800MHz for 2G
2100MHz for 3G
850/1800MHz for 4G/LTE
Click to expand...
Click to collapse
This is strange, as the 3G band 2100 Mhz is really common (many countries use it for 3G, and most any recent US phone intended for foreign travel will support it), and should be supported by the device out-of-the-box. This tells me the problem is likely not RUU/firmware related.
You sure the APN is properly typed? And does your carrier use any different APN for 3G, LTE, etc.?
redpoint73 said:
This is strange, as the 3G band 2100 Mhz is really common (many countries use it for 3G, and most any recent US phone intended for foreign travel will support it), and should be supported by the device out-of-the-box. This tells me the problem is likely not RUU/firmware related.
You sure the APN is properly typed? And does your carrier use any different APN for 3G, LTE, etc.?
Click to expand...
Click to collapse
No it uses the same APN for all types and its configured correctly. I also thought the issue might rather be related to some NV values or PRL. If I set it to 3G only, it "Sees" the carrier as I can see a signal bar in network signal guru app, but the mobile is not able to connect to it.
so i am thinking that since this is a lra variant, a lot of bands may be disabled. have you seen anywhere else that someone got a lra variant to work outside the us? i know you said people were selling it as being unlocked, but maybe its not
izzaeroth said:
so i am thinking that since this is a lra variant, a lot of bands may be disabled. have you seen anywhere else that someone got a lra variant to work outside the us? i know you said people were selling it as being unlocked, but maybe its not
Click to expand...
Click to collapse
Well the LRA variant is practically the Verizon one with everything same as the Verizon variant. There a lot of links on both Amazon and eBay in which its mentioned that its LRA variant and is factory unlocked and can be used anywhere in the world. And yes I came across various threads on XDA in which people had this same variant, working fine (3G atleast) but they wanted to upgrade to Android 6 MM as there is no official update available for this variant after Android 5 Lollipop. As for the relevant bands (2100MHz for 3G used in my country), they were already unlocked (checked via CDMA Tool and QXDM).
junaidawan86 said:
Well the LRA variant is practically the Verizon one with everything same as the Verizon variant. There a lot of links on both Amazon and eBay in which its mentioned that its LRA variant and is factory unlocked and can be used anywhere in the world. And yes I came across various threads on XDA in which people had this same variant, working fine (3G atleast) but they wanted to upgrade to Android 6 MM as there is no official update available for this variant after Android 5 Lollipop. As for the relevant bands (2100MHz for 3G used in my country), they were already unlocked (checked via CDMA Tool and QXDM).
Click to expand...
Click to collapse
hmm this is quite the problem. if you can confirm you are using the same rom as the others, i would then think the issue is the radio being defective
izzaeroth said:
hmm this is quite the problem. if you can confirm you are using the same rom as the others, i would then think the issue is the radio being defective
Click to expand...
Click to collapse
I am using the stock LRA RUU (android 5.0.2). I have also tried the VZW RUUs from 4.4 to 6.0 but the same issue exists on them all. Even I have used GPE and Sense based custom roms but the same issue. I think that the issue might be related to some NV values or this phone might be network locked. Is there a way to check if the phone is network/sim locked? As I am getting the (2G) signals for all the networks in my country.
junaidawan86 said:
I am using the stock LRA RUU (android 5.0.2). I have also tried the VZW RUUs from 4.4 to 6.0 but the same issue exists on them all. Even I have used GPE and Sense based custom roms but the same issue. I think that the issue might be related to some NV values or this phone might be network locked. Is there a way to check if the phone is network/sim locked? As I am getting the (2G) signals for all the networks in my country.
Click to expand...
Click to collapse
it being sim/network locked makes sense, because the phone was made for people who live in the middle of nowhere. there would also be a high probability that none of those people will ever travel outside the country. i do not know anything about the nv values and tweaking them, but i have looked at that thread a few times. lastly, if you have only picked up 2g regardless of sim or apn used, it could be defective radios
junaidawan86 said:
Well, I thought too that it might be sim locked but then why it is working with 2G networks. There should be no signal at all then. Also these LRA variants are being sold by many online retailers including Amazon as sim unlocked phones. And yes it acknowledges when I insert or change a sim. Says "Preparing sim card" and then I get a signal (2G only). When I choose 3G only in network settings, the signal is gone immediately and I have to switch back to auto or 2G only to get the signal back.
Click to expand...
Click to collapse
did you get the solution for the problem since i need help as i am facing the same problem
quican said:
did you get the solution for the problem since i need help as i am facing the same problem
Click to expand...
Click to collapse
yes I got my issue fixed. Can u confirm which device you have? software version *.*.512* or *.*.605.*?
I have a SM-J700P with a baseband of J700PVPU2BQJ2 that I unlocked and moved over to AT&T. I have it working on GSM but it says 3G at the top. I was told it may be on HSPA+, but looking here, I should be able to get on LTE just fine:
https://www.frequencycheck.com/carr...-sm-j700p-galaxy-j7-td-lte/at-t-united-states
I guess I want AWS?
Is there a way I can select the preferred band, and will that reset my phone? I have tried *#2263#, it doesn't work. Any help would be amazingly appreciated!
Also shouldn't my virgin boot screen switch to AT&T? I wish it would.
EDIT: Inputting "Q" on *#0011# doesn't do anything either
Do I also have the option of forcing bands?